HeathCo WLTRX5892 Video Security Light User Manual IC French Manual 5982 1
HeathCo LLC Video Security Light IC French Manual 5982 1
HeathCo >
Exhibit D Users Manual per 2 1033 b3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3013357 |
| Application ID | CQ2qw6clmCYZhmdhIxNu6Q== |
| Document Description | Exhibit D Users Manual per 2 1033 b3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.88kB (636035 bits) |
| Date Submitted | 2016-06-01 00:00:00 |
| Date Available | 2016-06-01 00:00:00 |
| Creation Date | 2016-06-01 10:18:44 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2016-06-01 10:18:44 |
| Document Title | IC French Manual (5982)1.pdf |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
| Document Author: | KPeterson |
Item #1001814036 Model #DFI-5892-WH USE AND CARE GUIDE VIDEO MOTION SECURITY LIGHT Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this video motion security light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Defiant! Table of Contents Tools Required .......................................4 Hardware Included.................................5 Package Contents ..................................5 Installation ................................................6 Operation...................................................8 Care and Cleaning ..................................12 Troubleshooting ......................................13 Table of Contents ......................................2 Safety Information ....................................2 Warranty ...................................................3 5-Year Limited Warranty ........................3 Pre-Installation .........................................3 Planning Installation ..............................3 Specifications ........................................3 Safety Information PRECAUTIONS Ƒ Please read and understand this entire manual before attempting to assemble, install, or operate this light fixture. Ƒ This light fixture requires a 120-Volt AC power source. Ƒ Some codes require installation by a qualified electrician. Ƒ This light fixture must be properly grounded. Ƒ This light fixture should be installed outdoors to a wall or eave. Ƒ The light fixture should be mounted approximately 8 ft. (2.4 m) above the ground. If the light fixture is mounted higher than recommended, aiming the sensor down will reduce the coverage area. Ƒ The light fixture/camera requires constant power to operate. Whenever the power is turned on to the light fixture (either for the first time or after a power outage), the light requires a 60-second boot-up period before the camera will be fully operational. Ƒ WARNING: Turn the power off at the circuit breaker or fuse. Place tape over the circuit breaker switch and verify power is off at the light fixture. WARNING: Risk of fire. Keep the lamp heads at least 2 in. (51 mm) from combustible materials. CAUTION: Burn hazard. Allow the light fixture to cool before touching. NOTICE: Do not connect this light fixture to a dimmer switch or timer. Many states regulate the use of security cameras and other recording devices. It is the purchaser’s sole responsibility to ensure compliance with all applicable laws and to provide any legally required notices. Check local laws regarding the use of any recording devices and cameras prior to installation. Ƒ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ƒ This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ƒ CAN ICES-3 (B)/NMB-3(B) Warranty 5-YEAR LIMITED WARRANTY WHAT IS COVERED This product is guaranteed to be free of factory defective parts and workmanship for a period of 5 years from date of purchase. Purchase receipt is required for all warranty claims. WHAT IS NOT COVERED This guarantee does not include repair service, adjustment and calibration due to misuse, abuse or negligence, or LEDs. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty is not extended to other equipment and components that a customer uses in conjunction with this product. No service parts available for this product. Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com. Pre-Installation PLANNING INSTALLATION Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture. Estimated installation time: 30 minutes SPECIFICATIONS Range Up to 70 ft. (21.3 m) (Varies with surrounding temperature) PIR motion sensing angle Up to 180° Electrical load - LED 34 Watts Lumens 2350 Power requirements 120 VAC, 60 Hz Video resolution Hi: 1280 x 720 (720p), Med: 640 x 360, Low: 320 x 180 Video frame rate Adjustable up to 25 fps (Default - 15 fps) Video viewing angle Up to 100° Operating temperature -13°F to +120°F (-25°C to +50°C) Mobile device requirements iPhone and Android compatible. See Homedepot.com for system requirements. HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Pre-Installation (continued) TOOLS REQUIRED Phillips screwdriver 1/8 in. Flathead screwdriver Wire strippers/ cutters Circuit tester Work gloves Silicone sealant Ladder Safety goggles Mobile Device Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size. AA BB CC DD EE FRONT FF GG Part Description Quantity AA Rubber plug BB Mounting bracket screw CC Mounting bracket screw DD Large mounting bolt EE Small mounting bolt (pre-installed) FF Mounting bracket (not to scale) GG Mini screwdriver PACKAGE CONTENTS Part Description Quantity Lamp head Light fixture Motion sensor Mounting plate Camera HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Installation the mounting 1 Determining location NOTE: The light fixture should be mounted approximately 8 ft. (2.4 m) above the ground. If the light fixture is mounted higher than recommended, aiming the sensor down will reduce the coverage area. THIS SIDE UP Ƒ Ƒ Ƒ 180° Wall Mount Determine the mounting location – wall or eave mount. Position the lamp heads (A) in the general direction of the desired light coverage. If needed, rotate the motion sensor (C) so the text faces upward. Eave Mount 2 Removing the mounting plate 3 Installing the mounting bracket WARNING: Turn the power off at the circuit breaker or fuse. Place tape over the circuit breaker switch and verify power is off at the light fixture. NOTE: This fixture comes with a mounting plate (D). It is pre-assembled on the light fixture (B) for shipping. NOTE: The small mounting bolt (EE) is pre-installed in the light fixture (B). Do not attempt to remove the small mounting bolt (EE). Ƒ NOTE: Six mounting bracket screws of various sizes are included. The installation will only require two. Discard the unused mounting bracket screws after installation. Unscrew the small mounting bolt (EE) connecting the light fixture (B) to the mounting plate (D) and remove the mounting plate (D). Ƒ Ƒ Ƒ Remove the existing light fixture. Install the mounting bracket (FF) with the stamped word “FRONT” facing away from the junction box. Use the mounting bracket screws (BB or CC) that best fit the junction box. Firmly pull on the mounting bracket to verify it is securely mounted to the junction box. If necessary, use the screws that were removed from the existing light fixture. FF EE FR ON FR ON BB or CC Installation (continued) the electrical 4 Installing the mounting plate 5 Making connections Ƒ Ƒ Ƒ Route the junction box wires through the hole in the mounting plate (D). Place the mounting plate (D) against the junction box. Ƒ When mounting to a wall, the “UP” arrow must point upward. Ƒ Ƒ When mounting to an eave, the “UP” arrow must point toward the building. Ƒ Insert the large mounting bolt (DD) through the mounting plate (D) hole located below the threaded hole, and thread it into the center hole of the mounting bracket (FF). Tighten the bolt (DD) securely. Firmly pull on the mounting plate (D) to verify it is securely attached to the mounting bracket (FF). Insert the junction box wires into the side of the terminal block and around the ground screw. Tighten terminal block screws using the mini-screwdriver (GG) and ground screw to secure the wires. Ƒ Insert the white wire from the junction box into the terminal marked “N (White)”. Ƒ Insert the black wire from the junction box into the terminal marked “L (Black)”. Ƒ Connect the bare or green ground wire from the junction box to the ground screw (marked with “GND”). UP/Haut/Arriba N (White/ Blanc/Blanco) GND Terre Tierra L (Black/ Noir/Negro) UP /Ha ut/ Arr iba FF UP GN TerrD Tie e rra /Hau t/A rrib TN N (W Bla hit nc/ e/ Bla nco L (B No lack ir/N / egro OR DD 6 Mounting the light fixture NOTICE: The two pins on the rear of the light fixture must be inserted into the terminal block for the light to work. Ƒ Ƒ Ƒ Align the bottom edge of the light fixture (B) with the bottom edge of the mounting plate (D). Tilt the light fixture (B) toward the mounting plate (D), making sure the light fixture (B) is centered on the mounting plate (D). Tighten the small mounting bolt (EE) securely through the center of the mounting plate (D). Do not overtighten. Push the rubber plug (AA) firmly into the mounting bolt hole on the light fixture (B). AA EE HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Installation (continued) around the light 7 Caulking fixture Ƒ Caulk around the mounting plate (D) and mounting surface with silicone sealant (not included). Operation Adjusting the lamp heads Ƒ WARNING: Risk of fire. Keep the lamp heads at least 2 in. (51 mm) from combustible materials. Rotating the sensor controls downward Rotate the motion sensor (C) so the text faces upward. CAUTION: Keep lamp heads 30° below horizontal to avoid water damage and electrical shock. Ƒ Turn the power on at the circuit breaker or fuse and turn on the wall switch. If needed, gently grasp the lamp heads (A) and tilt them up or down or side to side to adjust the light coverage area. Ƒ THIS SIDE UP 180° THIS SIDE UP 180° Operation (continued) the light to the 3 Downloading the mobile app 4 Connecting mobile app Ƒ Download the Notifi™ mobile app. Search for the “Notifi Video Solutions” app. Ƒ iOS Devices – Download the app from the App StoreSM. Ƒ NOTICE: The network password will be required to complete this process. Ƒ Android Devices – Download the app from the Google Play™ store. Ƒ Ƒ Ƒ Ensure the power to the light is turned ON. Allow 60 seconds for system boot-up. On the mobile device, go to Settings > Wi-Fi and select “Notifi_Video_SecurityXXXX” (“XXXX” represents the unique MAC address of each light fixture) from the available Wi-Fi networks. Once connected, open the Notifi app. The app will detect the new light. Select “Yes” to start the setup and the app will guide you through the remaining steps. NOTE: When creating a new Notifi account, the username and password must be a minimum of 4 characters and a maximum of 12 characters. Alpha-numeric and/or special characters may be used. the motion 6 Understanding detection process 5 Viewing live video The Notifi app provides live-stream video from the camera to a mobile device. Ƒ Ƒ Ƒ The light is controlled by a 180° PIR (passive infra-red) sensor. This sensor detects a temperature difference moving in front of it. When motion is detected after dark, the light will come on at the selected “Full Bright Intensity” level. Ƒ The camera uses both the 180° PIR sensor as well as a 100° image sensor located within the camera software. The camera’s image sensor will not activate unless the PIR sensor first detects a moving temperature difference within the detection zone. The camera will record motion day or night. Tap the name of the camera to be viewed. While in the live-stream screen, the following options are available: Ƒ Ƒ Ƒ This light has dual motion detection technologies. Tap the video camera icon ( ) to start recording live video. Tap again to stop recording. Tap the camera icon ( ) to save a still image from the live-stream video. To return to the main app screen, tap the ( or “Back” button in the top left corner. NOTE: All videos and images will be saved to the mobile device currently being used to view the live-stream video. HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Operation (continued) 7 Using the event list 8 Receiving notifications Tap the Events tab. Tap > Feature Settings > Notifications to select the notification settings. An event is created each time the camera senses motion. Ƒ Basic Service – The event list will show the date and time the motion was detected. Ƒ Premium Service (available for an additional fee) – The event list will include the date, time, and video of the event each time motion was detected. The video of each event will also be available to download for 30 days. If notifications are turned on, an email and/or push notification is sent each time the camera senses motion. Tap on the notification to be taken to the liveview video screen (Basic service) or the Event video (Premium service). the camera 9 Adjusting the light settings 10 Adjusting settings The light settings allow you to adjust the full bright duration, the DualBrite® duration, and the percentages of light intensity. The camera settings allow you to adjust the motion detection sensitivity, motion detection zones, and video quality. NOTE: Changes made to one light’s settings will not affect another light’s settings. NOTE: Changes made to one camera’s settings will not affect another camera’s settings. NOTE: The higher the “Sensitivity” setting, the greater the possibility of false triggering. To reduce false triggering, select a lower setting. Tap > Feature Settings > Light to select the light settings. Ƒ Full Bright Duration – This adjusts the amount of time the light will stay ON after all motion has stopped. Ƒ DualBrite Duration – This adjusts the amount of time the light stays ON at a reduced brightness level when no motion is detected. Ƒ Full Bright Intensity – This adjusts the intensity level of the light when motion is detected. Ƒ DualBrite Dimming Level – This adjusts the intensity level of the light when no motion is detected. Tap > Feature Settings > Camera to select the camera settings. 10 Ƒ Motion Detection – This adjusts the camera’s sensitivity to motion in its field of view. Ƒ Motion Detection Zones – This adjusts the camera’s detection area to include or exclude zones in its field of view. Ƒ Auto Adjust – Disabling this setting allows manual adjustments of the video’s quality settings. For best performance, leave the Auto Adjust ON. Operation (continued) the motion sensor 11 Setting the sensor for testing 12 Adjusting detection zone NOTE: The light fixture will operate during the day or night during testing. The light will stay on for 5 seconds after all motion is stopped. NOTE: The camera’s (E) detection zone is inside of the light’s detection zone. When the motion sensor (C) for the light is adjusted, the camera’s (E) motion sensor will also be adjusted. NOTE: The light requires a 60-second boot-up period before the camera will be fully operational. If motion is detected outside the camera’s detection zone, the light may turn on but the camera will not record an event. Tap > Feature Settings > Camera > Motion Detection to select the motion detection settings. Ƒ The light fixture will automatically enter “Test” mode whenever the “Motion Detection” option is selected. The light fixture will remain in “Test” until one of the following actions occurs: Ƒ Ƒ The “Save” or “Cancel” option is selected. Ƒ No movement during the testing process for 30 seconds. Ƒ Three minutes have passed without changing one of the on-screen settings. Ƒ Ƒ Ƒ Ƒ Perform a “walk test”: walk in an arc across the front of the motion sensor (C). Watch the light. The light will come on and the red LED will flash indicating motion has been detected. Stop, wait for the light to turn off, and then begin walking again. Continue this process until the detection zone has been established. If needed, gently grasp the motion sensor (C) and move it from side to side or up and down to adjust the detection zone. Adjust the “Motion Detection” sensitivity to High, Medium, or Low as needed. NOTE: The motion sensor (C) is more sensitive to motion moving across the front of the sensor. The motion sensor (C) is less sensitive to motion moving directly toward the front of the sensor. C and E 11 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Operation (continued) 13 Adding multiple users system name and 14 Adding photo Add a name and photo to represent the Notifi system on the mobile device. The photo will be placed inside the blue circle icon next to the selected Notifi system. The Notifi system allows control of multiple users within an account. Tap Ƒ Ƒ > Advanced Settings > Manage Multiple Users. Tap > Advanced Settings > System Name/Photo. Ƒ Ƒ Enter a name for the Notifi system. Select an existing photo and take a new photo to represent the Notifi system. Tap the “Add Viewers” button and type the email address in the “To:” field. Tap the “Send” button. NOTE: When adding multiple users, separate the email addresses with a semicolon. 15 Using manual mode NOTE: The light settings and name are stored in the light fixture. The photo is locally stored on the mobile device and is only visible on that device. 16 Deleting a Notifi system Manual mode overrides the motion sensor (C) and will turn the light on at the preset “Full Bright Intensity” level. This feature works day or night. The motion sensor (C) will reset to motion sensing mode at sunrise. Ƒ To delete a Notifi system from an account: Ƒ Ƒ On the main screen under the “Systems” tab, choose “ON”, “OFF”, or “AUTO” to control the lights for the selected Notifi system. Ƒ Turn off the wall switch controlling the Notifi system. On the main “Systems” screen, wait for the system to go offline (the system name and image will turn gray). Once offline, swipe the Notifi system to be deleted to the left and tap the trashcan icon ). Care and Cleaning Ƒ To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only. Ƒ Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the finish. This is not a defect in the finish and will not be covered by the warranty. Ƒ Do not spray the light fixture with a hose or power washer. Ƒ To clean the camera lens, use a dry, microfiber cloth only. 12 Troubleshooting Problem Possible Cause Solution Ƒ The light switch is turned off. Ƒ Turn the light switch on. Ƒ The fuse is blown or the circuit breaker is turned off. Ƒ Replace the fuse or turn the circuit breaker on. Ƒ The light is not scheduled to come ON. Ƒ Recheck the light operation during the scheduled “DualBrite Duration” (after sunset). Ƒ The circuit wiring is incorrect (if this is a new installation). Ƒ Verify the wiring is correct. Ƒ The motion sensor is aimed in the wrong direction. Ƒ Re-aim the motion sensor to cover the desired area. Ƒ The outside air temperature is close to the same as a person’s body heat. Ƒ Increase the “Motion Detection” setting. The light comes on during the day. Ƒ The light is scheduled to come ON. Ƒ Adjust the scheduled light operation in “DualBrite Duration.” The light comes on for no apparent reason. Ƒ The motion sensor may be sensing small animals or automobile traffic. Ƒ Decrease the “Motion Detection” setting or reposition the motion sensor. Ƒ The “Motion Detection” setting is set too high. Ƒ Decrease the “Motion Detection” setting. Ƒ The “DualBrite Duration” is operating at the preset “DualBrite Dimming Level” setting. Ƒ The light fixture is operating normally under these circumstances. The “DualBrite Duration” time is adjustable. Ƒ The outside temperature is much warmer or cooler than a person’s body heat (summer or winter). Ƒ Decrease the “Motion Detection” setting. Ƒ The light fixture is wired through a dimmer or timer. Ƒ Do not use a dimmer or timer to control the light fixture. Replace the dimmer or timer with a standard on/off wall switch. The lights stay ON too late in the “DualBrite Duration” setting. Ƒ The “DualBrite Duration” OFF time is set to late. Ƒ Adjust the “DualBrite Duration” OFF time to the desired setting. The lights do not stay ON late enough in the “DualBrite Duration” setting. Ƒ The “DualBrite Duration” OFF time is set to early. Ƒ Adjust the “DualBrite Duration” OFF time to the desired setting. The light will not come on. 13 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Troubleshooting (continued) Problem Possible Cause Solution The lights stay on continuously. Ƒ The motion sensor may be picking up a heat source, such as an air vent, dryer vent, or brightly painted, heat-reflective surface. Ƒ Decrease the “Motion Detection” setting or reposition the motion sensor. Ƒ The motion sensor is in manual mode. Ƒ Turn the manual mode option to Off or Auto. See Using manual mode on page 12. Ƒ The light fixture is wired through a dimmer or timer. Ƒ Do not use a dimmer or timer to control the light fixture. Replace the dimmer or timer with a standard on/off wall switch. Ƒ The light fixture is on the same circuit as a motor, transformer, or fluorescent bulb. Ƒ Install the light fixture on a circuit without motors, transformers, or fluorescent bulbs. Ƒ Heat or light from the lamp heads may be turning the motion sensor on and off. Ƒ Reposition the lamp heads away from the motion sensor. Ƒ Heat is being reflected from other objects and may be turning the motion sensor on and off. Ƒ Decrease the “Motion Detection” setting or reposition the motion sensor. Ƒ The light is offline (the system name and image are gray). Ƒ Ensure the light has power. Ƒ Ensure the light is connected to the wi-fi router. Ƒ The light is unable to connect to the wi-fi (the system name and image are gray). Ƒ Turn the power to the light off. Wait 30 seconds and turn the power on. Wait 60 seconds for the light to boot-up. The app is not finding the light fixture. Ƒ The light may have been deleted from the account. Ƒ Reconnect the light to the app (see step 4, page 9). Motion notifications are not being sent to the app. Ƒ Notifications are turned off in the app. Ƒ Turn notifications on in the app (see step 8, page 10). Ƒ Motion is not being detected inside the camera’s detection zone. Ƒ Re-aim the motion sensor to cover the desired area or increase the “Motion Detection” setting. The lights flash on and off. The light fixture is not responding to the app. 14 Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM Retain this manual for future use. Apple and the Apple logos are trademarks of Apple Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Android is a trademark of Google Inc. ® Wi-Fi is a registered trademark of Wi-Fi Alliance Item #1001814036 Model #DFI-5892-WH USE AND CARE GUIDE VIDEO MOTION SECURITY LIGHT Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this video motion security light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Defiant! Table of Contents Tools Required .......................................4 Hardware Included.................................5 Package Contents ..................................5 Installation ................................................6 Operation...................................................8 Care and Cleaning ..................................12 Troubleshooting ......................................13 Table of Contents ......................................2 Safety Information ....................................2 Warranty ...................................................3 5-Year Limited Warranty ........................3 Pre-Installation .........................................3 Planning Installation ..............................3 Specifications ........................................3 Safety Information PRECAUTIONS Ƒ Please read and understand this entire manual before attempting to assemble, install, or operate this light fixture. Ƒ This light fixture requires a 120-Volt AC power source. Ƒ Some codes require installation by a qualified electrician. Ƒ This light fixture must be properly grounded. Ƒ This light fixture should be installed outdoors to a wall or eave. Ƒ The light fixture should be mounted approximately 8 ft. (2.4 m) above the ground. If the light fixture is mounted higher than recommended, aiming the sensor down will reduce the coverage area. Ƒ The light fixture/camera requires constant power to operate. Whenever the power is turned on to the light fixture (either for the first time or after a power outage), the light requires a 60-second boot-up period before the camera will be fully operational. Ƒ Many states regulate the use of security cameras and other recording devices. It is the purchaser’s sole responsibility to ensure compliance with all applicable laws and to provide any legally required notices. Check local laws regarding the use of any recording devices and cameras prior to installation. WARNING: Turn the power off at the circuit breaker or fuse. Place tape over the circuit breaker switch and verify power is off at the light fixture. WARNING: Risk of fire. Keep the lamp heads at least 2 in. (51 mm) from combustible materials. CAUTION: Burn hazard. Allow the light fixture to cool before touching. NOTICE: Do not connect this light fixture to a dimmer switch or timer. Ƒ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ƒ Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Ƒ CAN ICES-3 (B)/NMB-3(B) 17 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Warranty 5-YEAR LIMITED WARRANTY WHAT IS COVERED This product is guaranteed to be free of factory defective parts and workmanship for a period of 5 years from date of purchase. Purchase receipt is required for all warranty claims. WHAT IS NOT COVERED This guarantee does not include repair service, adjustment and calibration due to misuse, abuse or negligence, or LEDs. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty is not extended to other equipment and components that a customer uses in conjunction with this product. No service parts available for this product. Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com. Pre-Installation PLANNING INSTALLATION Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture. Estimated installation time: 30 minutes SPECIFICATIONS Range Up to 70 ft. (21.3 m) (Varies with surrounding temperature) PIR motion sensing angle Up to 180° Electrical load - LED 34 Watts Lumens 2350 Power requirements 120 VAC, 60 Hz Video resolution Hi: 1280 x 720 (720p), Med: 640 x 360, Low: 320 x 180 Video frame rate Adjustable up to 25 fps (Default - 15 fps) Video viewing angle Up to 100° Operating temperature -13°F to +120°F (-25°C to +50°C) Mobile device requirements iPhone and Android compatible. See Homedepot.com for system requirements. 18 Pre-Installation (continued) TOOLS REQUIRED Phillips screwdriver 1/8 in. Flathead screwdriver Wire strippers/ cutters Circuit tester Work gloves Silicone sealant Ladder Safety goggles Mobile Device 19 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size. AA BB CC DD EE FRONT FF GG Part Description Quantity AA Rubber plug BB Mounting bracket screw CC Mounting bracket screw DD Large mounting bolt EE Small mounting bolt (pre-installed) FF Mounting bracket (not to scale) GG Mini screwdriver PACKAGE CONTENTS Part Description Quantity Lamp head Light fixture Motion sensor Mounting plate Camera 20 Installation the mounting 1 Determining location NOTE: The light fixture should be mounted approximately 8 ft. (2.4 m) above the ground. If the light fixture is mounted higher than recommended, aiming the sensor down will reduce the coverage area. THIS SIDE UP Ƒ Ƒ Ƒ 180° Wall Mount Determine the mounting location – wall or eave mount. Position the lamp heads (A) in the general direction of the desired light coverage. If needed, rotate the motion sensor (C) so the text faces upward. Eave Mount 2 Removing the mounting plate 3 Installing the mounting bracket WARNING: Turn the power off at the circuit breaker or fuse. Place tape over the circuit breaker switch and verify power is off at the light fixture. NOTE: This fixture comes with a mounting plate (D). It is pre-assembled on the light fixture (B) for shipping. NOTE: The small mounting bolt (EE) is pre-installed in the light fixture (B). Do not attempt to remove the small mounting bolt (EE). Ƒ NOTE: Six mounting bracket screws of various sizes are included. The installation will only require two. Discard the unused mounting bracket screws after installation. Unscrew the small mounting bolt (EE) connecting the light fixture (B) to the mounting plate (D) and remove the mounting plate (D). Ƒ Ƒ Ƒ Remove the existing light fixture. Install the mounting bracket (FF) with the stamped word “FRONT” facing away from the junction box. Use the mounting bracket screws (BB or CC) that best fit the junction box. Firmly pull on the mounting bracket to verify it is securely mounted to the junction box. If necessary, use the screws that were removed from the existing light fixture. FF EE FR ON FR ON BB or CC 21 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Installation (continued) the electrical 4 Installing the mounting plate 5 Making connections Ƒ Ƒ Ƒ Route the junction box wires through the hole in the mounting plate (D). Place the mounting plate (D) against the junction box. Ƒ When mounting to a wall, the “UP” arrow must point upward. Ƒ Ƒ When mounting to an eave, the “UP” arrow must point toward the building. Ƒ Insert the large mounting bolt (DD) through the mounting plate (D) hole located below the threaded hole, and thread it into the center hole of the mounting bracket (FF). Tighten the bolt (DD) securely. Firmly pull on the mounting plate (D) to verify it is securely attached to the mounting bracket (FF). Insert the junction box wires into the side of the terminal block and around the ground screw. Tighten terminal block screws using the mini-screwdriver (GG) and ground screw to secure the wires. Ƒ Insert the white wire from the junction box into the terminal marked “N (White)”. Ƒ Insert the black wire from the junction box into the terminal marked “L (Black)”. Ƒ Connect the bare or green ground wire from the junction box to the ground screw (marked with “GND”). UP/Haut/Arriba N (White/ Blanc/Blanco) GND Terre Tierra L (Black/ Noir/Negro) UP /Ha ut/ Arr iba FF UP GN TerrD Tie e rra /Hau t/A rrib TN N (W Bla hit nc/ e/ Bla nco L (B No lack ir/N / egro OR DD 6 Mounting the light fixture NOTICE: The two pins on the rear of the light fixture must be inserted into the terminal block for the light to work. Ƒ Ƒ Ƒ Align the bottom edge of the light fixture (B) with the bottom edge of the mounting plate (D). Tilt the light fixture (B) toward the mounting plate (D), making sure the light fixture (B) is centered on the mounting plate (D). Tighten the small mounting bolt (EE) securely through the center of the mounting plate (D). Do not overtighten. Push the rubber plug (AA) firmly into the mounting bolt hole on the light fixture (B). AA 22 EE Installation (continued) around the light 7 Caulking fixture Ƒ Caulk around the mounting plate (D) and mounting surface with silicone sealant (not included). Operation Adjusting the lamp heads Ƒ WARNING: Risk of fire. Keep the lamp heads at least 2 in. (51 mm) from combustible materials. NOTICE: The Notifi™ mobile app must be downloaded to operate the light fixture. See Step 3 on page 9 for instructions. Turn the power on at the circuit breaker or fuse and turn on the wall switch. If needed, gently grasp the lamp heads (A) and tilt them up or down or side to side to adjust the light coverage area. Ƒ Rotate the motion sensor (C) so the text faces upward. NOTICE: All clearances must be maintained. See Safety Information on page 2. CAUTION: Keep lamp heads 30° below horizontal to avoid water damage and electrical shock. Ƒ Rotating the sensor controls downward THIS SIDE UP 180° THIS SIDE UP 180° 23 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Operation (continued) the light to the 3 Downloading the mobile app 4 Connecting mobile app Ƒ Download the Notifi™ mobile app. Search for the “Notifi Video Solutions” app. Ƒ iOS Devices – Download the app from the App StoreSM. Ƒ NOTICE: The network password will be required to complete this process. Ƒ Android Devices – Download the app from the Google Play™ store. Ƒ Ƒ Ƒ Ensure the power to the light is turned ON. Allow 60 seconds for system boot-up. On the mobile device, go to Settings > Wi-Fi and select “Notifi_Video_SecurityXXXX” (“XXXX” represents the unique MAC address of each light fixture) from the available Wi-Fi networks. Once connected, open the Notifi app. The app will detect the new light. Select “Yes” to start the setup and the app will guide you through the remaining steps. NOTE: When creating a new Notifi account, the username and password must be a minimum of 4 characters and a maximum of 12 characters. Alpha-numeric and/or special characters may be used. the motion 6 Understanding detection process 5 Viewing live video The Notifi app provides live-stream video from the camera to a mobile device. Ƒ Ƒ Ƒ The light is controlled by a 180° PIR (passive infra-red) sensor. This sensor detects a temperature difference moving in front of it. When motion is detected after dark, the light will come on at the selected “Full Bright Intensity” level. Ƒ The camera uses both the 180° PIR sensor as well as a 100° image sensor located within the camera software. The camera’s image sensor will not activate unless the PIR sensor first detects a moving temperature difference within the detection zone. The camera will record motion day or night. Tap the name of the camera to be viewed. While in the live-stream screen, the following options are available: Ƒ Ƒ Ƒ This light has dual motion detection technologies. Tap the video camera icon ( ) to start recording live video. Tap again to stop recording. Tap the camera icon ( ) to save a still image from the live-stream video. To return to the main app screen, tap the ( or “Back” button in the top left corner. NOTE: All videos and images will be saved to the mobile device currently being used to view the live-stream video. 24 Operation (continued) 7 Using the event list 8 Receiving notifications Tap the Events tab. Tap > Feature Settings > Notifications to select the notification settings. An event is created each time the camera senses motion. Ƒ Basic Service – The event list will show the date and time the motion was detected. Ƒ Premium Service (available for an additional fee) – The event list will include the date, time, and video of the event each time motion was detected. The video of each event will also be available to download for 30 days. If notifications are turned on, an email and/or push notification is sent each time the camera senses motion. Tap on the notification to be taken to the liveview video screen (Basic service) or the Event video (Premium service). the camera 9 Adjusting the light settings 10 Adjusting settings The light settings allow you to adjust the full bright duration, the DualBrite® duration, and the percentages of light intensity. The camera settings allow you to adjust the motion detection sensitivity, motion detection zones, and video quality. NOTE: Changes made to one light’s settings will not affect another light’s settings. NOTE: Changes made to one camera’s settings will not affect another camera’s settings. NOTE: The higher the “Sensitivity” setting, the greater the possibility of false triggering. To reduce false triggering, select a lower setting. Tap > Feature Settings > Light to select the light settings. Ƒ Full Bright Duration – This adjusts the amount of time the light will stay ON after all motion has stopped. Ƒ DualBrite Duration – This adjusts the amount of time the light stays ON at a reduced brightness level when no motion is detected. Ƒ Full Bright Intensity – This adjusts the intensity level of the light when motion is detected. Ƒ DualBrite Dimming Level – This adjusts the intensity level of the light when no motion is detected. Tap > Feature Settings > Camera to select the camera settings. 25 Ƒ Motion Detection – This adjusts the camera’s sensitivity to motion in its field of view. Ƒ Motion Detection Zones – This adjusts the camera’s detection area to include or exclude zones in its field of view. Ƒ Auto Adjust – Disabling this setting allows manual adjustments of the video’s quality settings. For best performance, leave the Auto Adjust ON. HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Operation (continued) the motion sensor 11 Setting the sensor for testing 12 Adjusting detection zone NOTE: The light fixture will operate during the day or night during testing. The light will stay on for 5 seconds after all motion is stopped. NOTE: The camera’s (E) detection zone is inside of the light’s detection zone. When the motion sensor (C) for the light is adjusted, the camera’s (E) motion sensor will also be adjusted. NOTE: The light requires a 60-second boot-up period before the camera will be fully operational. If motion is detected outside the camera’s detection zone, the light may turn on but the camera will not record an event. Tap > Feature Settings > Camera > Motion Detection to select the motion detection settings. Ƒ The light fixture will automatically enter “Test” mode whenever the “Motion Detection” option is selected. The light fixture will remain in “Test” until one of the following actions occurs: Ƒ Ƒ The “Save” or “Cancel” option is selected. Ƒ No movement during the testing process for 30 seconds. Ƒ Three minutes have passed without changing one of the on-screen settings. Ƒ Ƒ Ƒ Ƒ Perform a “walk test”: walk in an arc across the front of the motion sensor (C). Watch the light. The light will come on and the red LED will flash indicating motion has been detected. Stop, wait for the light to turn off, and then begin walking again. Continue this process until the detection zone has been established. If needed, gently grasp the motion sensor (C) and move it from side to side or up and down to adjust the detection zone. Adjust the “Motion Detection” sensitivity to High, Medium, or Low as needed. NOTE: The motion sensor (C) is more sensitive to motion moving across the front of the sensor. The motion sensor (C) is less sensitive to motion moving directly toward the front of the sensor. C and E 26 Operation (continued) system name and 14 Adding photo 13 Adding multiple users Add a name and photo to represent the Notifi system on the mobile device. The photo will be placed inside the blue circle icon next to the selected Notifi system. The Notifi system allows control of multiple users within an account. Tap Ƒ Ƒ > Advanced Settings > Manage Multiple Users. Tap > Advanced Settings > System Name/Photo. Ƒ Ƒ Enter a name for the Notifi system. Select an existing photo and take a new photo to represent the Notifi system. Tap the “Add Viewers” button and type the email address in the “To:” field. Tap the “Send” button. NOTE: When adding multiple users, separate the email addresses with a semicolon. NOTE: The light settings and name are stored in the light fixture. The photo is locally stored on the mobile devaice and is only visible on that device. 15 Using manual mode 16 Deleting a Notifi system Manual mode overrides the motion sensor (C) and will turn the light on at the preset “Full Bright Intensity” level. This feature works day or night. The motion sensor (C) will reset to motion sensing mode at sunrise. Ƒ To delete a Notifi system from an account: Ƒ Ƒ On the main screen under the “Systems” tab, choose “ON”, “OFF”, or “AUTO” to control the lights for the selected Notifi system. Ƒ Turn off the wall switch controlling the Notifi system. On the main “Systems” screen, wait for the system to go offline (the system name and image will turn gray). Once offline, swipe the Notifi system to be deleted to the left and tap the trashcan icon ). Care and Cleaning Ƒ To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only. Ƒ Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the finish. This is not a defect in the finish and will not be covered by the warranty. Ƒ Do not spray the light fixture with a hose or power washer. Ƒ To clean the camera lens, use a dry, microfiber cloth only. 27 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Troubleshooting Problem Possible Cause Solution Ƒ The light switch is turned off. Ƒ Turn the light switch on. Ƒ The fuse is blown or the circuit breaker is turned off. Ƒ Replace the fuse or turn the circuit breaker on. Ƒ The light is not scheduled to come ON. Ƒ Recheck the light operation during the scheduled “DualBrite Duration” (after sunset). Ƒ The circuit wiring is incorrect (if this is a new installation). Ƒ Verify the wiring is correct. Ƒ The motion sensor is aimed in the wrong direction. Ƒ Re-aim the motion sensor to cover the desired area. Ƒ The outside air temperature is close to the same as a person’s body heat. Ƒ Increase the “Motion Detection” setting. The light comes on during the day. Ƒ The light is scheduled to come ON. Ƒ Adjust the scheduled light operation in “DualBrite Duration.” The light comes on for no apparent reason. Ƒ The motion sensor may be sensing small animals or automobile traffic. Ƒ Decrease the “Motion Detection” setting or reposition the motion sensor. Ƒ The “Motion Detection” setting is set too high. Ƒ Decrease the “Motion Detection” setting. Ƒ The “DualBrite Duration” is operating at the preset “DualBrite Dimming Level” setting. Ƒ The light fixture is operating normally under these circumstances. The “DualBrite Duration” time is adjustable. Ƒ The outside temperature is much warmer or cooler than a person’s body heat (summer or winter). Ƒ Decrease the “Motion Detection” setting. Ƒ The light fixture is wired through a dimmer or timer. Ƒ Do not use a dimmer or timer to control the light fixture. Replace the dimmer or timer with a standard on/off wall switch. The lights stay ON too late in the “DualBrite Duration” setting. Ƒ The “DualBrite Duration” OFF time is set to late. Ƒ Adjust the “DualBrite Duration” OFF time to the desired setting. The lights do not stay ON late enough in the “DualBrite Duration” setting. Ƒ The “DualBrite Duration” OFF time is set to early. Ƒ Adjust the “DualBrite Duration” OFF time to the desired setting. The light will not come on. 28 Troubleshooting (continued) Problem Possible Cause Solution The lights stay on continuously. Ƒ The motion sensor may be picking up a heat source, such as an air vent, dryer vent, or brightly painted, heat-reflective surface. Ƒ Decrease the “Motion Detection” setting or reposition the motion sensor. Ƒ The motion sensor is in manual mode. Ƒ Turn the manual mode option to Off or Auto. See Using manual mode on page 12. Ƒ The light fixture is wired through a dimmer or timer. Ƒ Do not use a dimmer or timer to control the light fixture. Replace the dimmer or timer with a standard on/off wall switch. Ƒ The light fixture is on the same circuit as a motor, transformer, or fluorescent bulb. Ƒ Install the light fixture on a circuit without motors, transformers, or fluorescent bulbs. Ƒ Heat or light from the lamp heads may be turning the motion sensor on and off. Ƒ Reposition the lamp heads away from the motion sensor. Ƒ Heat is being reflected from other objects and may be turning the motion sensor on and off. Ƒ Decrease the “Motion Detection” setting or reposition the motion sensor. Ƒ The light is offline (the system name and image are gray). Ƒ Ensure the light has power. Ƒ Ensure the light is connected to the wi-fi router. Ƒ The light is unable to connect to the wi-fi (the system name and image are gray). Ƒ Turn the power to the light off. Wait 30 seconds and turn the power on. Wait 60 seconds for the light to boot-up. The app is not finding the light fixture. Ƒ The light may have been deleted from the account. Ƒ Reconnect the light to the app (see step 4, page 9). Motion notifications are not being sent to the app. Ƒ Notifications are turned off in the app. Ƒ Turn notifications on in the app (see step 8, page 10). Ƒ Motion is not being detected inside the camera’s detection zone. Ƒ Re-aim the motion sensor to cover the desired area or increase the “Motion Detection” setting. The lights flash on and off. The light fixture is not responding to the app. 29 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance. Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM Retain this manual for future use. Apple and the Apple logos are trademarks of Apple Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Android is a trademark of Google Inc. ® Wi-Fi is a registered trademark of Wi-Fi Alliance
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : KPeterson Create Date : 2016:06:01 10:18:44-05:00 Modify Date : 2016:06:01 10:18:44-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:06:01 10:15:46-05:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:82ef0e79-64b9-40f2-9a8c-1e14e547b6cd Original Document ID : xmp.did:4B0D96F99873E01196A0E7EE2F4866E3 Document ID : xmp.id:07de045e-d2cd-4ff5-8f87-9b8f85010b5a Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:ee28ad6a-6e1e-42b8-881a-0abd1b5121e0 Derived From Document ID : xmp.did:1b8629ae-c03d-4bf6-961c-9a5e7ba8fe6a Derived From Original Document ID: xmp.did:4B0D96F99873E01196A0E7EE2F4866E3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:06:01 10:15:33-05:00 Format : application/pdf Title : IC French Manual (5982)1.pdf Creator : KPeterson Producer : Acrobat Distiller 9.5.5 (Windows) Trapped : False Slug Family : Minion Pro Slug Version : 2.108 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : Adobe Systems Slug Font Kind : OpenType - PS Slug Checksum : 4058168798 Slug Post Script Name : MinionPro-Regular Slug Font Sense 12 Checksum : 4058168798 Page Count : 30EXIF Metadata provided by EXIF.tools