Hisense Electric LCDD0008 Part15 Subpart B-LCD TV User Manual W9HLCDD0008 1

Hisense Electric Co., Ltd. Part15 Subpart B-LCD TV W9HLCDD0008 1

Contents

W9HLCDD0008_User Manual 1

F40K26EW
Part NO.: ES-J112302
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTI ON:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
FCC Statement
WARNING:
The manufacturer is not responsible for any radio
or TV interference caused by unauthorized
modifications to this equipment. Such
modifications could void the user's authority.
NOTE:
This equipment has been tested and found to comply
with the limits for a class B digital Device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio Communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
the receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
®
Your TV is ENERGY STAR qualified in the “Standard
mode. It meets strict energy efficiency guidelines set
by the U.S. Environmental Protection Agency and
Department of Energy.
ENERGY STAR is a joint program of these
government agencies, designed to promote energy
efficient products and practices.
Changes to certain features, settings, and
functionalities of this TV (i.e. TV Guide, Picture,
Sound) can increase or change the power
consumption.
Depending upon such changed settings, the power
consumption may exceed the limits required for the
ENERGY STAR qualification in the “Standard” mode.
Energy Star
Canadian Notice:
This Class B digital apparatus complies with
Canadian ICES-003 as a Standard Television
Receiving Apparatus, Canada BET-7/NTMR7.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Apparatus should not be exposed to dripping or
splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16. An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords, as
this can result in a risk of fire or electric shock.
18. Do not push objects through any openings in this unit,
as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock.
Never spill or spray any type of liquid into the unit.
19. If an outside antenna or cable system is connected to
the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage
surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements
for the grounding electrode.
20. When replacement parts are required, be sure the
service technician uses replacement parts specified by
the manufacturer or those that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
21. Upon completion of any service or repairs to this unit,
ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. When you connect the product to other equipment, turn
off the power and unplug all of the equipment from the
wall outlet. Failure to do so may cause an electric
shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the
instructions when making any connections.
23. Sudden high volume sound may cause hearing or
speaker damage. When you use headphones, (if the
unit is equipped with a headphone jack) keep the
volume at a moderate level. If you use headphones
continuously with high volume sound, it may cause
hearing damage.
CONDENSATION
Moisture will form in the operating section of the unit if the
unit is brought from cool surroundings into a warm room or
if the temperature of the room rises suddenly. When this
happens, unit's performance will be impaired. To prevent
this, let the unit stand in its new surroundings for about an
hour before switching it on, or make sure that the room
temperature rises gradually.
Condensation may also form during the summer if the unit
is exposed to the breeze from an air conditioner. In such
cases, change the location of the unit.
Important Safety Instructions
HOW TO HANDLE THE LCD PANEL
- Do not press hard or jolt the LCD panel. It may cause
the LCD panel glass to break and injury may occur.
- If the LCD panel is broken, make absolutely sure that
you do not touch the liquid in the panel. This may
cause skin inflammation.
If the liquid gets in your mouth, immediately gargle
and consult with your doctor. Also, if the liquid gets in
your eyes or touches your skin, consult with your
doctor after rinsing for at least 15 minutes or longer
in clean water.
Possible Adverse Effects on LCD Panel:
If a fixed (non-moving) pattern remains on the LCD
Panel for long periods of time, the image can become
permanently engrained in the LCD Panel and cause
subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY.
Never leave your LCD Panel on for long periods of
time while it is displaying the following formats or
images:
- Fixed Images, such as stock tickers, video game
patterns, TV station logos, and websites.
- Special Formats that do not use the entire screen.
For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom
of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and
right sides of screen).
The following symptoms are not signs of
malfunction but technical limitation. Therefore we
disclaim any responsibility for these symptoms.
- LCD Panels are manufactured using an extremely
high level of precision technology, however
sometimes parts of the screen may be missing
picture elements or have luminous spots.
This is not a sign of a malfunction.
- Do not install the LCD Panel near electronic
equipment that produces electromagnetic waves.
Some equipment placed too near this unit may cause
interference.
- Effect on infrared devices – There may be
interference while using infrared devices such as
infrared cordless headphones.
Declaration of Conformity
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
and (2)This device must accept any interference
received, including interference that may cause
undesired operation.
Your TV contains tin-lead solder and a fluorescent
lamp containing a small amount of mercury.
Disposal of these materials may be regulated for
environmental reasons. Your TV also contains
material that can be recycled and reused. For disposal
or recycling information, contact your local authorities
or the Electronic Industries Alliance at www.eia.org to
find a recycler in your area.
End of life directives
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely affect
the performance of your TV, and are not considered
defects.
Non-active pixels
Power source
TO USE AC POWER
1. Connect the AC cord plug into this unit's AC IN jack.
2. Connect the AC cord into an AC outlet.
Please make sure to insert the cord securely at both
the TV and the wall outlet.
The AC Cord has a polarized type AC line plug. If the
supplied AC cord does not match your AC outlet,
contact a qualified electrician.
WARNING:
Do not connect this unit to the power using any device
other than the supplied AC cord. This could cause fire,
electrical shock, or damage.
Do not use with a voltage other than the power voltage
specified. This could cause fire, electrical shock, or
damage.
CAUTION:
When this unit is not used for a long time, (e.g., away
on a trip) in the interest of safety, be sure to unplug it
from the AC outlet.
Do not plug/unplug the AC cord when your hands are
wet. This may cause electrical shock.
If you need to replace the supplied AC adapter or AC
cord, the specified one is recommended. Contact the
dealer that you purchased the unit from.
NOTE
Contents
Other Information
Trouble Shooting
General
29
31
Basic Features
Turning the TV On for the First Time
Turning your TV on or off
Selecting the Input Source
Changing Channels/ Volume
Shortcuts Instructions
To Use the Menu
Using the Picture Menu
Using the Audio Menu
Using the Screen Menu
Using the Channels Menu
Using the Settings Menu
Using the Lock Menu
11
11
11
11
12
13
13
13
14
14
15
16
Getting Started
Accessories list
Installing the stand
Installing a wall-mount bracket
When Installing the TV Against a Wall or Enclosed Area
Viewing the Control Panel
Viewing the Remote Control
Installing Batteries in the Remote Control
Making Connections
2
2
3
3
4
5
6
7
Advanced Features
Network Connection
Connecting to a Wireless Network
DLNA Settings
Media Share Settings in computer
Setting to share files
Network Function
VUDU HD Movies
VUDU Apps
Netflix
Others
View the shared files on TV
Digital Media Play
Enjoy Music Files
Browse the Pictures
Browse the Text Files
17
19
20
20
21
22
23
24
25
25
26
26
27
27
28
Specifications and pictures are subject to change without further notice.
NOTE
1
2
Getting Started
Accessories list
Users Manual
A
AA
Remote Control
Manual Book Battery x 2 Spacer x 4
Winding
(M4 x L12) x 6 (M5 x L12) x 4 (M6 x L25) x 4
(ST4 x L14) x 2
Screws:
Installing the Stand
Store the stand and stand screws in case you want to decide to the stand in the future.
The above figures are for reference only, please refer to the actual units to determine the appearances.
NOTE
To install the stand:
1. Before beginning this process, assure that TV is laid face-down on a clean, safe, and cushioned space to
avoid any damage to the unit.
2. Do not touch or press the LCD screen, the glass might break under pressure.
3. Take out the stand, and insert the stand into the TV suitably, then put the stand to relevant position of the TV
set until all the holes match each other completely.
4. Erect the TV set, and put it on the proper position for watching.
1 2
3 4
Use the 4 screws
(M4 x L12) which
in accessories
bag to fix the
base plate and
upright.
Use the 2 screws
(M4 x L12) which
in accessories
bag to fix the
cover plate and
upright.
Use the 2 screws
(ST4 x L14)
which in
accessories bag
to fix the cover
plate and upright.
Use the 4 screws
(M5 x L12) which
in accessories
bag to fix the
base stand and
TV set.
Follow these below figures to complete the installation steps.
Inadequate air circulation can lead to overheating of
the TV and may cause damage to your TV or cause a
fire.
Make sure that your TV has adequate air circulation.
Allow enough space around the TV as shown below.
Avoid operating the TV at temperatures below
Inadequate air 41 ° F (5 °C).
Never install the TV set as follows:
If you want to attach the TV to a wall-mount bracket
(not provided), you should first remove the stand if it is
pre-attached (see above).
To attach your TV to a wall-mount bracket:
-Sufficient expertise is required in installing this TV,
especially to determine the strength of the wall for
withstanding the TVs weight.
-The selected screws are 6.5 mm to 7.5 mm in length
when measured from the attaching surface of the
mounting hook. The diameter and length of the
screws differ depending on the Wall-Mount Bracket
model.
1. Make sure the TV is laid face-down on a clean, safe,
and cushioned space, remove the original screws
in the bracket holes on the TV back over.
2. Place the provided spacer in the corresponding
bracket holes. Fix purchased bracket on the TV
with 4 screws (M6 x L25) which in accessories bag.
3. Follow instructions provided with the wall bracket.
4. The provided screws (M6 x L25) can be used with
brackets 1.5mm to 2.5mm thickness. Air circulation is blocked.
Wall
Air circulation is blocked.
Wall
Install on the wall
4 inches
(10cm)
Leave at least this much
space around the set.
12 inches
(30cm)
4 inches (10c m)
4 inches
(10cm)
12 inches
(30cm)
4 inches
(10cm)
4 inches
(10cm)
Install with stand
2 inches
(6cm)
/8
3
Leave at least this much
space around the set.
When Installing the TV Against a
Wall or Enclosed Area
3
Getting Started
Installing a wall-mount bracket
Use of screws that not matched may result in
internal damage to the TV set or cause it to fall, etc.
WARNING
6.5-7.5 mm
Screw
Mounting Hook
Rear of the TV set
M6
400 X 400
Wall-mount hole pattern VESA mm)(
Wall-mount screw size (mm)
spacer
screws
bracket
Power Indicator
Remote Sensor
The figures are for reference only, please refer to the actual set.
NOTE
4
Getting Started
Viewing the Control Panel
Remote sensor
Item Description
Power Indicator During startup the light flashing alternately red and blue,
it is blue when turned on, and it is red in standby mode.
MENU Display an on-screen menu, the OSD (on screen
display) of your TVs features.
INPUT Select among the different input signal sources.
Adjust the volume.
Select sub-menu and adjust setting in OSD menus.
Adjust the channel.
Select items of OSD menu.
VOLVOL
CH
Receive remote signals from the remote control.
Do not put anything near the sensor, as its function may
be affected.
Press to turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby
mode. Unplug the power cord to disconnect power.
Viewing the Remote control
1. Illustrations are for your reference only.
2. Red/Green/Yellow/Cyan buttons are used for EPG.
After pressing the [GUIDE] button when viewing digital channels, the same color buttons will appear with explanations
in the on-screen display (OSD). Follow the steps shown in the OSD.
NOTE
5
Getting Started
Select input source
Display the information banner
Select sound mode
Select picture mode
/ / /
Move Up/Down/Left/Right
or adjust settings Confirm selections
Special function buttons
Select AV Component
VGA sourceHDMI
Media content control
function buttons
Set the sleep timer
Audio select button
Mono/Stereo/SAP operation
Zoom Button
Adjust CC mode
Open the DTV program guide
(if available)
Power on/off
Direct channel selection
Mute button
Next channel
Enter the network main menu
Enter the NETFLIX interface
Enter the vudu main menu
Power Indicator
Previous channel
Return to the upper menu
Increase Volume
Decrease Volume
Menu button
Close the menu
Display the favorite channel list
Go to the previous channel
Dash button
Select a digital sub-channel
ENTER
4A
1. Slide the back cover to open the battery compartment of the remote control.
3. Close the battery compartment cover.
2.
ends indicated in the battery compartment.
Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - )
1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
4. If you do not intend to use the remote control for a long time, remove the batteries.
5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth.
chemicals touch your skin, wash immediately.
NOTE
6
Getting Started
Installing Batteries in the Remote Control
Gently push and slide Gently push and slideInsert the batteries
Making Connections
POWER INPUT HDMI HDMI
HDMI
HDMI
VGALAN PC/DVI
AUDIO IN
USB
HEADPHONE
COMPONENT
AV
ANT/CABLE
DIGITAL
AUDIO OUT
HDMI
HDMI (High-Definition Multimedia Interface)provides an uncompressed, all digital
audio/video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray
disc player, and A/V receiver.
COMPONENT Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with component(YP P )
B R
video and audio output jacks.
VGA
PC/DVI AUDIO IN
ANT/CABLE
USB For DMP and service.
DIGITAL AUDIO OUT
HEADPHONE Connect earphones for private listening.
VIDEO/AUDIO(L,R)
LAN
Connect to the composite video and audio(L/R) output jacks on external video devices.
Connect an ethernet cable to access a network or the Internet.
Item Description
Connect to a PC or other devices with a VGA interface.
Connect an antenna or cable TV to this jack.
Connect to an external digital audio device.
7
Getting Started
HDMI2 HDMI1
ANT/CABLE
IN
HEADPHONE
DIGITAL
AUDIO OUT
Y PBPR
COMP
VIDEO L R
AV IN
HDMI4 HDMI3
LAN USB
DC 5V 0.5A(MAX) PC/DVI
AUDIO IN
VGA
PC
VIDEO L R
AV IN
Check the jacks for position and type before making any connections. Loose connections can result in image
or color problems. Make sure that all connections are tight and secure.
2. Not all A/V devices have the ability to connect to a TV, please refer to the users manual of your A/V device for
compatibility and connections procedure.
3. Always unplug the power cord when connecting external equipment.
1.
Connecting an A/V Device with Composite Cable
Connecting an antenna, cable or cable/satellite box
1. Turn off the TV before connecting the antenna.
2. Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite
box. If you are using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to
connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not
provided).
3. Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV.
ANT/CABLE
IN
8
Getting Started
Making Connections
1. Use the audio and video cables to connect the external A/V devices composite video/audio jacks to the TVs
jacks. (Video = yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
NOTE
AV Cable (not included)
Yellow (VIDEO)
Yellow (VIDEO)
Red (R)
Red (R)
White (L)
White (L)
Satellite Receiver
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Equipment with A/V jacks
Connecting an A/V Device with Component (YP P ) Cable
B R
1.
jacks. Use an audio cable to connect the external A/V devices component audio jacks to the TVs
AUDIO(L/R) jacks.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Use a component cable to connect the external A/V devices component output jacks to the TVs YP P
B R
Connecting an A/V Device with HDMI Cable
The HDMI connector provides both video and audio signals, its not necessary to connect the audio cable.
- Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV receiver and
digital devices).
- Some devices such as a PVR or DVD player require HDMI signal to be set to output in the device's settings.
- Please consult your device user manual for instructions.
1. Use an HDMI cable to connect the A/V devices HDMI output jack to the TVs HDMI jack.
2. Plug the connected devices into the mains socket before switching on the TV .
3. Select the corresponding source from the TV.
HDMI Cable (not included) DVD Player / Recorder
Set-top Box
Equipment with HDMI jacks
NOTE
9
Getting Started
Audio Cable (not included)
Component Cable (not included)
Y
Pb/Cb
Pr/Cr
Red (R)
White (L)
Y
Pb/Cb
Pr/Cr
Red (R)
White (L)
Equipment with component jacks
COMPONENT
OUT
Satellite Receiver
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Y PBPR
COMP
L R
Connecting a headphone
Headphones can be connected to the HEADPHONE
output on your set. (While the headphone is
connected, the sound from the built-in speakers will
be disabled. )
HEADPHONE
Connecting a PC with VGA Cable
1.
PCs audio output jack to TVs PC/DVI AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Use a VGA cable to connect the PCs VGA output jack to the TVs VGA jack. Use an audio cable to connect the
Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the
manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not warranted.
The VGA cable will not supplied with the product.
We strongly recommend to use VGA cable with 2 cores as shown in the figure.
Connecting an Audio Receiver with Digital Audio out cable
1.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Use a coaxial cable to connect the A/V devices audio jack to the TVs DIGITAL AUDIO OUT jack.
Computer
VGA Cable
(not included)
Audio Cable
(not included)
NOTE
NOTE
When a digital audio system is connected to the DIGITAL AUDIO OUT (COAXIAL) jack, decrease the volume
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
When the receiver (home theater) is set to on, you can hear sound output from the TVs digital audio out jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the
source is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you
want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB
satellite receiver directly to an amplifier or home theater.
10
Getting Started
PC/DVI
AUDIO IN
VGA
PC
Coaxial Cable
(not included)
DIGITAL
AUDIO OUT
The Setup Wizard menu appears the first time you
turn on the TV. It will assist you to specify the menu
language, time zone, picture mode, tuner mode and
channel installation.
Turning the TV On for the First Time
Turning your TV on or off
To turn your TV on or off (standby mode):
1. Plug the power cord into an AC power outlet.
2. Press [POWER] button. Your TV turns on.
3. Press [POWER] button again to turn off your TV. When
you turn off your TV, it goes into standby mode.
NOTE
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the power
cord.
WARNING
The first time you turn on your TV, you
must select the TV signal source. Your
TV stores this information, so you do
not need to change the TV signal
source unless it changes. For example,
you change from an outside antenna to
cable TV.
To select the video input source:
1. Turn on your TV, then press [INPUT]
button on the remote or on the TV.
The Input Source menu opens.
2. Press [ / ] button to highlight the
input source, then press [ENTER]
button.
11
Basic Features
Selecting the Input Source
V
1. Press [CH ] button on the remote control, you
can change the channels.
(Press [VOL ] button to raise or lower the
volume).
2. Press [CH ]button on the back panel of the TV
set, you can also change the channels.
(Press [VOL ] button to raise or lower the
volume).
3. Press the numeric buttons on the remote control to
display the corresponding channels.
/ V
V
/ V
/
/
Changing the channels can also be achieved by
directly pressing the programme No. If you want to
choose the programme No. from 1 to 9, press the
numeric buttons directly. If you want to select a
programme No. that double-digit or three-figure,
the time between twice pressing the numbers
should not be more than 3 seconds.
NOTE
Changing Channels/ Volume
IMPORTANT: Make sure that the antenna or cable
connection is made.
1. Make sure that you have:
Installed the remote control batteries.
Connected an antenna or cable.
Connected the power cord.
2. Press [POWER] ( ) to turn on your TV. The Setup
Wizard menu displays.
3. Press [ / ] to select your menu language: English,
Spanish or French, press [ENTER] button to
confirm.
4. Press [ / ] to select your picture mode: Home
Mode or Retail Mode, press [ENTER] button to
confirm.
5. Press [ / ] to select your tuner mode: Antenna or
Cable, press [ENTER] button to confirm.
6. Press [ / ] to set the channel installation: Scan or
Skip Scan, press [ENTER] button to confirm.
If you select “Scan”, your TV automatically starts
Channel Installation available in your viewing area.
If you select “Skip Scan”, your TV does not scan for
channels.
Depending on the reception condition, it may take up to
25 minutes or more to complete memorizing channels.
Please allow the process to complete without interruption.
Please connect cable or antenna
Channel Installation
Status: Scanning...
ATV Program Installed:3
DTV Program Installed:2
Cancel
20%
EXIT
Select
Enter
ENTER
Exit
MENU
TV
AV
Component
VGA
HDMI1
HDMI2
HDMI3
HDMI4
DMP
INPUT
Aspect - Select the screen aspect ration from Normal,
Wide, Zoom and Cinema.
Normal: The original 4:3 aspect ratio (1.33:1
signal) is preserved, so black bars are added to the
left and right of the image. Standard TV broadcasts
are displayed with a 4:3 aspect ratio.
Wide: When watching a standard broadcast or full-
frame movie in this mode, the display image is
stretched proportionately to fill the TV screen.
When watching a widescreen (1.78:1 signal)
program or movie, the display image fills the TV
screen.
Zoom: Stretch the 4:3 aspect ratio image vertically
and horizontally to fill the screen at 1:1.78 aspect
ratio.
Cinema: Stretch the 4:3 aspect ratio image
vertically and horizontally to fill the screen at 1:2.35
aspect ratio.
Shortcuts Instructions
12
Getting Started
VUDU - VUDUis an on-demand service that offers
high-definition movies on the Web. You can access
the VUDU service by press this button.
HICAST@ - Press to browse the rich Apps in HICAST
Dock. The Apps in the HICAST Dock let you watch
movies, TV shows, listen to music,and much more.
Favorite List
3
4
5-1
5-2
5-3
AT05-1
AT05-2
AT05-3
Add/Erase Page up/down
11:00 PM - 2:00 AM
Not Rated Service1 English
Antenna
Stereo
480p SD
AT05-4
AT05 480p
(No program details.)
5-4
11:10 PM
5-3 6
11:00 PM - 2:00 AM Wed, 8-Jun
(No program details.)
Not Rated
5-4 AT05-4
Wednesday, 8-June-2011 11:10:00PM
Next Day
Today
Tomorrow
Tomorrow
Tomorrow
11:00 PM
2:00 AM
5:00 AM
8:00 AM
AT05 480p
AT05 480p
AT05 480p
AT05 480p
NETFLIX - Open the Netflix interface. Netflix is an
online DVD and Blu-ray Disc rental service, offering
rental-by mail and streaming instantly to Netflix
members.
Fav. - D add or
delete
Cursor up/down: Press
Add/Erase: Press [YELLOW] button to add or
delete the channel from Favorite List.
Page up/down: Press [RED/GREEN] button to turn
the page up or down.
DISPLAY - D
GUIDE - Open the DTV program guide
isplay your Favorite List. You can
channels to create your favorite list.
isplay the information banner. The
information including channel number, channel name,
current system time, tuner mode, audio stream, video
format, audio language, closed caption mode,
parental locks rated, program details, etc.
. The program
guide information is provided by the broadcasting
company.
[ / ] button to select the
option.
To Use the Menu
Using the Picture Menu
You can adjust:
13
Basic Features
Picture Mode - Adjust the Picture Mode. You can
select: Energy Saving, Sports, Custom, Vivid,
Standard or Theater.
Brightness - You can increase or decrease the
brightness of the picture. Increasing the brightness
can add more light to dark areas of the picture, while
decreasing the brightness can add more darkness to
light areas of the picture.
Contrast - You can increase or decrease the contrast
of the picture. Increase the contrast to adjust the white
areas of the picture or decrease the contrast to adjust
the black areas of the picture.
Color - Adjust the level of color in the picture.
Tint - Adjust flesh tones so they appear natual.
Sharpness - You can increase the sharpness level for
clearer images or decrease the sharpness level for
smoother images.
Advanced Video - Access advanced video settings
such as Color Temperature, Noise Reduction and
Adaptive Contrast.
Color Temperature: Change the color
temperature. You can select the color temperature
from three options: Cool, Standard and Warm.
Noise Reduction: It can optimize the picture signal
from time and space; reduce the outside noise
interference and return the pure initial signal. It has
four ratings: Off, Low, Medium and High.
Adaptive Contrast: According to the content of
picture, it can adjust contrast automatically.
1
2
3
4
Press the [MENU] button to open the main menu.
Press the to select a menu option,
then press the to enter the menu.
In the menu, you can:
press the to select an item,
press the to adjust the value, or
press the [ /ENTER] to enter a submenu.
Press the [MENU] button to return to the previous
menu or press the [EXIT] button to exit the menu.
[ / ] button
[ /ENTER]
[ / ]
[ / ]
The menus in the user’s manual may vary slightly from the actual screen.
NOTE
Picture
Picture Mode Energy Saving
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
45
55
50
10
0
Select Back
MENU
Sound Mode - Select the Sound Mode: Standard,
Speech, User or Music.
Balance -
Equalizer -
Adjust the volume of the left and right
speakers.
Weaken or enlarge the sound of the main
frequency points.
Using the Audio Menu
You can adjust:
Audio
Sound Mode Music
Balance
Equalizer
Sound Surround
SPDIF Type
Auto Volume Control
Off
PCM
Off
0
Select Back
MENU
Audio
10DB
0DB
-10DB
5 0 0 2 4
120Hz 500Hz 1.5KHz 5KHz 10KHz
SelectAdjust Back
MENU
NOTE
Adjust for NTSC signal reception in DTV mode.
Tuner Mode - Select TV source: Antenna or Cable
Auto Channels Search - Scan for Channels that have
signals and stores the channels information in the
channel list.
Channel Skip - You can
Favorite List - Add or delete
MTS - Select the default audio stream: Mono, Stereo
or SAP.
Mono: If there is noise or static on weak stereo
broadcasts.
Stereo: For programs broadcast in stereo.
SAP: To listen to a secondary audio program.
Audio Language - Select the audio language:
English, Spanish or French
.
cancel a channel stored in
the channel list.
channels to create a
favorite list. You can press [FAV] button to display
your Favorite List.
.
Auto Scan
Status: Scanning...
Analog Channels: 0
Digital Channels: 0
Antenna
Back
MENU
15%
14
Basic Features
Using the Screen Menu
NOTE
Only available in VGA mode.
Sound Surround -
SPDIF Type -
Enhance the surround sound and
bass sound effects.
Send digital audio to an external audio
system. You can select PCM, RAW or Off.
PCM: PCM is an encoding, mainly used for analog
signal, Dolby mainly used for digital signal.
RAW: When the data stream carries Dolby signal,
digital audio outputs Dolby data stream. When the
data stream carries no Dolby signal, it transports
PCM data stream.
Auto Volume Control - According to different audio
signal, it can adjust volume automatically.
H.Position -
V.Position -
Phase -
Clock -
Auto Adjust -
Move the image right or left.
Move the image up or down.
Adjust the focus of stable images.
Adjust the sample frequency.
It can adjust the image settings such as
position and phase automatically.
You can adjust:
You can adjust:
Enter
ENTER
Screen
H.Position
V.Positon
Phase
Clock
Auto Adjust
41
27
0
127
Select Back
MENU
Using the Channels Menu
Enter
ENTER
Channels
Tuner Mode
Auto Channel Search
Channel Skip
Favorite List
MTS
Audio Language
Cable
Stereo
English
Select Back
MENU
NOTE
V
When you press [CH / V] button, your TV skips the
channel you cancelled. You can still tune to the channel
using the number buttons on the remote control.
NOTE
Only available in analog TV signal.
NOTE
Only available in digital TV signal.
Sleep Timer: Specify the amount of time before
your TV automatically turns off: off-10-...-120
minutes.
Caption - Adjust Closed Captioning settings.
Caption Control: Select the Closed Caption mode:
CC Off, CC On or CC On When Mute.
Analog Closed Caption: Select an Analog Caption
setting:
CC1~CC4: Closed captioning appears in a small
banner across the bottom of the screen. CC1 is
usually the printed” version of the audio.
CC2~CC4 display content are provided by the
broadcaster.
Text1~Text4: Closed captioning that covers half
or all of the screen. Text1~Text4 display content
are provided by the broadcaster.
Off: To turn off the Analog Caption.
Digital Closed Caption: Select a Digital Caption
setting: Service1~Service6 or Off.
Digital Caption Style: Customize the look of
digital Closed Captioning.
Caption Style: Set the look of Digital CC. “As
Broadcaster” uses broadcasters style.
Font Size: Select the size of font.
Font Style: Select the style of font.
Font Color: Select the color of font.
Font Opacity: Select the opacity level of font.
Background Color: Select the color of the
background.
Background Opacity: Select the opacity level of
the background.
Window Color: Select the color of the window.
Window Opacity: Select the opacity level of the
window.
Network - You can set the network in this menu. For
more information, see “ .
Demo Mode - Select “On” in Demo Mode, after 30s,
the E-POS will come out.
Version Info - Display the software version information.
Reset Default - Every TV has its original setting
before leaving the factory. This function can help you
restore these settings.
Network Setup
15
Basic Features
Language - You can select the menu's language
among English, Spanish and French.
Menu Settings - Set the menu's transparency and
timeout.
Timeout: Select the display time of the menu: 10-
20-...-60 seconds.
Time Setup - Set the time zone, daylight saving, time
and sleep timer.
Time Zone: Select your local time zone: Eastern
Time, Hawaii, Alaska, Arizona, Indiana, Mountain
Time, Central Time or Pacific Time.
DayLight Saving: Set the Daylight Saving time for
your area.
Time: You can set up the exact time by yourself.
Auto Synchronization: Select “On” to output
the time information from digital signal.
Date: Set the current year/month/day.
Time: Set the current time.
Power On Timer: When “On, you can set the
time when the TV turns on automatically.
Timer: Set the current time when the TV turns
on.
Power Off Timer: When “On, you can set the
time when the TV turns off automatically.
Timer: Set the current time when the TV turns
off.
Using the Settings Menu
You can adjust:
Auto Synchronization
Date
Time
Power On Timer
Timer
Power Off Timer
Timer
On
2000/01/01
08:08 PM
On
12:00 AM
On
12:00 AM
Select Back
MENU
Settings
Caption Style
Font Size
Font Style
Font Color
Font Opacity
Background Color
Background Opacity
Window Color
Custom
Large
Style1
White
Solid
Black
Solid
Black
Select Back
MENU
Settings
Language
Menu Settings
Time Setup
Caption
Network
Demo Mode
Version Info
Reset Default
English
On
Select Back
MENU
Enter
ENTER
Settings

Navigation menu