Honeywell 8680A Barcode Scanner User Manual Xenon 1900 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3815654
Application ID	+v0t9doS4CN6A6q9fR/9yA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	189.91kB (2373932 bits)
Date Submitted	2018-04-13 00:00:00
Date Available	2018-04-16 00:00:00
Creation Date	2005-11-18 12:53:09
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-03-13 09:45:19
Document Title	Xenon 1900 Quick Start Guide
Document Creator	FrameMaker 2017.0.3
Document Author:	Honeywell Scanning & Mobility

8680i
P Draft
Wearable Scanner
Quick Start Guide
8680-EN-QS Rev (a)
3/18
Overview
Battery
Battery
latch
Right button
Left button
Trigger
User window
Scanner
Note: The battery must be fully charged before the first use. An
MB4-BAT-SCN02 or an MB4-SCN02 Charging Station
must be purchased separately.
Attach the Scanner to Your Hand
1.
Slide your fingers into the loosened strap.
2.
Pull the strap to secure to your fingers.
Right or Left Handed Operation
To release the finger trigger, turn over the scanner. Slide the
latch toward the user window to release the finger trigger. Turn
the finger strap around and snap it into place to change the
operation to the correct hand.
Power Up the Scanner
Press the trigger for 10 seconds to power up the scanner. The
battery, WiFi, and Bluetooth status appears in the window.
Wrist Position When Scanning
Warning: Do not stare directly into the laser beam.
How to Scan a Bar Code
The 8680i scanner has a view finder that projects a bright aimer
line. This aimer line should be centered over the bar code, but it
can be positioned in any direction for a good read.
Linear bar codes
2D Matrix symbol s
The aimer line is smaller when the scanner is closer to the code
and larger when it is farther from the code. Symbologies with
smaller bars or elements (mil size) should be read closer to the
unit. Symbologies with larger bars or elements (mil size) should
be read farther from the unit. To read single or multiple symbols
(on a page or on an object), hold the scanner at an appropriate
distance from the target, press the trigger, and center the aimer
line on the symbol. If the code being scanned is highly reflective
(e.g., laminated), it may be necessary to tilt the code up 15° to
18° to prevent unwanted reflection.
Connect the Scanner via Bluetooth
Pair with a Bluetooth Device Using a HID Keyboard
The 8680i scanner can pair with host Bluetooth devices such as
personal computers, laptops, and tablets. This is the default setting for an 8680i scanner. Follow the steps below to establish
one-way communication with the host device.
1.
Scan the appropriate Bluetooth HID Keyboard Connect bar
code below.
* Bluetooth HID Keyboard
Connect
Bluetooth HID Japanese
Keyboard Connect
2.
Set your host device so it searches for other Bluetooth
devices. (Refer to your host device’s User’s Guide for pairing
instructions.)
3.
Once your host device has located the scanner, select the
8680i scanner name from the list displayed.
4.
Some host devices automatically pair with the scanner. If
your host device automatically pairs with the scanner, it
displays a successful pairing message and you do not need
to continue to the next step.
5.
Some PDT hosts display a prompt for a PIN. Ignore this
message.
6.
If your host device does not automatically pair with the
scanner, a PIN is displayed. This PIN must be scanned
within 60 seconds. Using the scanner, you must quickly
scan Bluetooth PIN Code below, then scan the numeric bar
code(s) for the PIN code from the chart below, then scan the
Save bar code.
Bluetooth PIN Code
6
Save
The Bluetooth symbol appears in the scanner window when the
scanner pairs with a host.
Pair with an Android™ Device
The 8680i scanner can pair with Android devices.
1.
Set your Android device so it searches for other Bluetooth
devices. (Refer to your Android device’s User’s Guide for
pairing instructions.)
2.
Scan the BT Connection - Android Device bar code below.
BT Connection - Android Device
On the Android device, the 8680i scanner is shown as a keyboard. Click on it to pair. The Bluetooth symbol appears in the
scanner window when the scanner pairs with a host.
Disconnect from the Host
Once your scanner has been connected to a host, you must disconnect it in order to communicate with a different device. Scan
the Bluetooth HID Keyboard Disconnect bar code to unlink the
scanner from the currently linked host.
Bluetooth HID Keyboard Disconnect
Tap and Pair
You can pair your Android™ phone with the scanner by touching
the devices together.
1.
Touch the Android phone to the scanner.
2.
The phone recognizes the scanner and prompts you to pair.
3.
Verify the pairing of the scanner in your phone’s Bluetooth
settings.
Pair with a Bluetooth Serial Port - PCs/Laptops
The 8680i scanner can pair with a Bluetooth serial port on a PC
or laptop. Scanning the Non-Base BT Connection bar code
below unlinks your scanner and puts it into a discoverable state.
Once the scanner searches for and connects with a Bluetooth
host, the scanner stores the connection to the host device
address and switches virtual COM ports. This allows the scanner
to automatically relink to the host if the connection is lost.
1.
Scan the Non-Base BT Connection bar code below to
unlink your scanner and put it in a discoverable state.
Non-Base BT Connection
2.
Set your host device so it searches for other Bluetooth
devices. (Refer to your host device’s User’s Guide for pairing
instructions.)
3.
Once your host device has located the scanner, select the
8680i scanner name from the list displayed.
4.
If a PIN is requested, enter 1234 (the default).
The Bluetooth symbol appears in the scanner window when the
scanner pairs with a host. The connection to the host device
address is stored in the scanner and virtual COM ports are
switched. This allows the scanner to automatically relink to the
host if the connection is lost.
Once the scanner battery is charged and you have paired it to a
host device, you may begin scanning bar codes.
Connect the Scanner via WiFi
Note: WiFi capability is only supported by 8680i scanners that
are licensed for WiFi.
10
The 8680i scanner can be used with WiFi networks using
EZConfig Cloud for Scanning.
1.
See Install EZConfig Cloud for Scanning on page 178 to
install the EZConfig software.
2.
Use your interface cable to connect the 8680i scanner to
your PC and open EZConfig.
3.
Select the Scan Data Window tab, then the Create WiFi Bar
Code tab.
4.
Click on the WiFi access logo on your PC.
11
5.
When your WiFi list appears, select the network to which you
want to connect the scanner and click on Properties.
6.
Use the information shown for the IPv4 address, the IPv4
DNS servers, and the network name to fill in the EConfig
screen.
12
192.345.67.0
192.345.67.0
Honeywell_86Net
Enter network password
192.345.67.89
3390
Note: The TCP Port is always 3390.
13
7.
Click on either Create 1D Wifi Bar Code or Create 1D Wifi
Bar Code.
8.
Print the bar code and scan it with the scanner to connect to
the WiFi network.
Replace the Battery
Note: The battery should be replaced in an environment free
from excessive dust or particulate to avoid an internal
buildup of dust in the unit.
If the LED on the scanner flashes red, it indicates the battery is
low. To replace the battery, slide the battery latch to the
unlocked position and lift up on the battery.
Replace the battery by snapping it in to the scanner. Slide the
battery latch to the locked position.
14
Support
To search our knowledge base for a solution or to log into the
Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.
User Documentation
For the user guide and other documentation, go to
www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and
click Get Resources > Product Warranty.
Patents
For patent information, see www.hsmpats.com.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make
changes in specifications and other information contained in
this document without prior notice, and the reader should in all
cases consult HII to determine whether any such changes have
been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of
15
this material. HII disclaims all responsibility for the selection
and use of software and/or hardware to achieve intended
results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into
another language without the prior written consent of HII.
Copyright2018 Honeywell International Inc. All rights
reserved.
16
Preliminary Draft 4/11/18
Rev (b)
Agency Model: 8680i
Product documentation is
available at
www.honeywellaidc.com.
La documentation sur le
produit est disponible Ă 
www.honeywellaidc.com.
La documentation du
produit est disponible sur
le site
www.honeywellaidc.com.
La documentazione sul
prodotto è disponibile sul
sito
www.honeywellaidc.com.
Die Produktdokumentation
ist unter
www.honeywellaidc.com
verfĂźgbar.
La documentaciĂłn del
producto estĂĄ disponible
en
www.honeywellaidc.com.
www.honeywellaidc.com
www.honeywellaidc.com
www.honeywellaidc.com
www.honeywellaidc.com
Документацию по изделию
можно найти на сайте
www.honeywellaidc.com.
Ürün belgelerine
www.honeywellaidc.com
adresinden ulaşılabilir.
The EU declaration of conformity, if
applicable, and other publicly
downloadable certificates are
available at
www.honeywellaidc.com/
compliance.
La dĂŠclaration de conformitĂŠ de
l'UE, le cas ĂŠchĂŠant, et d'autres
certificats du domaine public
tĂŠlĂŠchargeables sont disponibles
sur www.honeywellaidc.com/
compliance.
La dĂŠclaration de conformitĂŠ de
l'UE, si applicable, et d'autres
certificats tĂŠlĂŠchargeables
publiquement sont disponibles sur
www.honeywellaidc.com/
compliance.
La dichiarazione di conformitĂ  UE,
se applicabile, e altri certificati
pubblicamente scaricabili sono
disponibili all'indirizzo
www.honeywellaidc.com/
compliance.
Die EU-Konformitätserklärung
(falls zutreffend) sowie weitere
Ăśffentliche Zertifikate zum
Herunterladen erhalten Sie Ăźber
www.honeywellaidc.com/
compliance.
La declaraciĂłn de conformidad de
la UE, si es aplicable, y otros
certificados descargables
pĂşblicamente estĂĄn disponibles en
www.honeywellaidc.com/
compliance.
www.honeywellaidc.com/
compliance
EU
EU

 
   (     )
        
 
www.honeywellaidc.com/
compliance
Geçerli olduğunda AB uygunluk
beyanı ve diğer kamuya açık
karşıdan yüklenebilir sertifikalara
www.honeywellaidc.com/
compliance adresinden ulaşılabilir.
参对
www.honeywellaidc.com/
compliance
www.honeywellaidc.com/
compliance
www.honeywellaidc.com/
compliance
La documentaciĂłn del
producto estĂĄ disponible
en
www.honeywellaidc.com.
A documentação do
produto estĂĄ disponĂ­vel em
www.honeywellaidc.com.
‫תיעוד המוצר זמין בכתובת‬
.www.honeywellaidc.com
‫ﺗﻮﻓﺮ ﻭﺛﺎﺋﻖ ﺍﻟﻤﻨ ﺞ ﻋﻠ ﺍﻟﻤﻮﻗﻊ‬
ّ
‫ﺍﻟ ﺎﻟ‬
www.honeywellaidc.com.
Puede descargar la declaraciĂłn de
conformidad de la UE, si
corresponde, y cualquier otro
certificado de acceso pĂşblico en
www.honeywellaidc.com/
compliance.
A declaração de conformidade da
UniĂŁo Europeia, se aplicĂĄvel, e
outros certificados para download
pĂşblico estĂŁo disponĂ­veis em
www.honeywellaidc.com/
compliance.
‫אישורים להורדה עבור הצבור זמינות‬
/www.honeywellaidc.com ‫בכתובת‬
compliance
‫ﺍﻟﺸﻬﺎﺩﺍﺕ ﺍﻟﻘﺎﺑﻠﺔ ﻟﻠ ﻨﺰﻳﻞ ﻣ ﺎﺣﺔ ﻟﻠﻌﺎﻣﺔ ﻋﻠ‬
/www.honeywellaidc.com ‫ﺍﻟﻤﻮﻗﻊ‬
.compliance
FCC Part 15 Subpart B Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment
other than those specified by Honeywell. The correction is the responsibility of the user.
Caution: Any changes or
modifications made to this
equipment not expressly approved
by Honeywell International Inc.
may void the authorization to
operate this equipment.
Honeywell International
Inc.
Mise en garde : Toute modification
apportĂŠe Ă  cet ĂŠquipement ou
l’usage de tout périphérique ou
accessoire qui ne sont pas
expressĂŠment approuvĂŠs par
Honeywell International Inc. peut
annuler l’autorisation d’utiliser cet
ĂŠquipement.
Mise en garde : tous les
changements ou les modifications
apportĂŠs Ă  cet ĂŠquipement ou
toute utilisation de pĂŠriphĂŠriques
ou accessoires non expressĂŠment
approuvĂŠs par Honeywell
International Inc. peuvent annuler
l’autorisation d’utiliser cet
ĂŠquipement.
Honeywell
International Inc.
: Honeywell International Inc.
Attenzione: qualsiasi variazione o
modifica apportata a questa
apparecchiatura, oppure qualsiasi
utilizzo di qualsiasi periferica o
accessorio, non espressamente
approvati da Honeywell
International Inc., potrebbero
annullare l'autorizzazione
concessa all'utente per utilizzare
l'apparecchiatura.
Inc.
: Honeywell International
PrecauciĂłn: Cualquier
modificaciĂłn o cambio realizado
en este equipo, o el uso de
perifĂŠricos o de accesorios que no
se haya aprobado expresamente
por Honeywell International Inc.,
puede anular la autorizaciĂłn para
utilizar este equipo.
PrecauciĂłn: cualquier cambio o
modificaciĂłn a este equipo, o el
uso de cualquier perifĂŠrico o
accesorio que no estĂŠ
expresamente aprobado por
Honeywell International Inc. puede
invalidar la autorizaciĂłn para
usarlo.
Atenção: qualquer alteração ou
modificação ou o uso de qualquer
perifĂŠrico ou acessĂłrio nĂŁo
aprovado expressamente pela
Honeywell International Inc. neste
equipamento poderĂĄ invalidar a
autorização de operå-lo.
‫ ﻗﺪ ﺗﺆﺩﻱ ﺃﻱ ﺗﻐﻴﻴﺮﺍﺕ ﺃﻭ ﺗﻌﺪﻳﻼﺕ ﻋﻠ‬:‫ﺗﺤﺬﻳﺮ‬
‫ﺮ ﻣﺼﺎﺩﻕ ﻋﻠﻴﻬﺎ ﻣﻦ ﺷﺮﻛﺔ‬.‫ﺎﺯ ﻏ‬23‫ﻫﺬﺍ ﺍﻟ‬
‫ ﺇﻟ ﺇﻟﻐﺎء‬Honeywell International Inc.
.‫ﺎﺯ‬23‫ﺺ ﺗﺸﻐﻴﻞ ﻫﺬﺍ ﺍﻟ‬.‫ﺗﺮﺧ‬
‫ שינויים או התאמות הנעשים בציוד‬:‫זהירות‬
Honeywell ‫זה ללא אישור מפורש של‬
‫ עשויים לבטל את‬International Inc
.‫ההרשאה להפעיל ציוד זה‬
Dikkat: Bu ekipmanda Honeywell
International Inc.tarafĹndan açĹkça
onaylanmamış düzenleme veya
değişiklikler yapılması ya da çevre
birimi veya aksesuarlarÄąn
kullanÄąlmasÄą, ekipmanÄą kullanma
yetkisini geçersiz kĹlabilir.
Vorsicht: Veränderungen an
diesem Gerät sowie die
Verwendung von
Peripheriegeräten und ZubehÜr
ohne ausdrĂźckliche Genehmigung
von Honeywell International Inc.
kĂśnnen dazu fĂźhren, dass die
Betriebsgenehmigung fĂźr dieses
Gerät erlischt.
  !  
      "
  
 #     $ "
  
 %
$, 
 &   $
Honeywell International Inc.  "
 
   '  
 "    .
Para su uso en MĂŠxico, la operaciĂłn de este equipo estĂĄ sujeta a las siguientes dos condiciones:
1. Es posible que este equipo o dispositivo no cause interferencia perjudicial.
2. Este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operaciĂłn no deseada.
Canadian Compliance
ConformitÊ à la règlementation canadienne
This Class B digital apparatus complies with Canadian RSS-247. Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Cet appareil numĂŠrique de la Classe B est conforme Ă  la norme RSS-247 du Canada. Son fonctionnement est assujetti aux conditions suivantes :
1. Cet appareil ne doit pas causer de brouillage prĂŠjudiciable.
2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le brouillage pouvant causer un fonctionnement indÊsirable.
Use only shielded data cables with
this system. This unit has been
tested with cables less than 3
meters. Cables greater than 3
meters may not meet class B
performance.
参
Utiliser uniquement des câbles de
donnÊes blindÊs avec ce système.
L’appareil a été testé avec des
câbles de moins de 3 mètres. Les
câbles de longueur supÊrieure à 3
mètres peuvent ne pas satisfaire à
la performance de la classe B.
Utilisez uniquement des câbles de
donnÊes blindÊs avec ce système.
Ce dispositif a ĂŠtĂŠ testĂŠ avec des
câbles de moins de 3 mètres. Il est
possible que les câbles de plus de
3 mètres ne permettent pas
d’atteindre des performances de
classe B.
3m
Utilizzare solo cavi dati schermati
con questo sistema. Questa unitĂ 
è stata testata con cavi di
lunghezza inferiore a 3 metri. I cavi
di lunghezza superiore a 3 metri
potrebbero non essere conformi
alle prestazioni di classe B.
3m
.3
Class B
FĂźr dieses System nur
abgeschirmte Datenkabel
verwenden. Dieses System wurde
mit Kabeln unter 3 Metern Länge
geprßft. Kabel mit einer Länge von
Ăźber 3 Metern erfĂźllen
mĂśglicherweise nicht die
Richtlinien der Klasse B.
Utilice sĂłlo cables de datos
blindados con este sistema. Esta
unidad se ha probado con cables
de longitud inferior a 3 metros.
Cables superiores a 3 metros quizĂĄ
no satisfagan los requisitos de
rendimiento de la clase B.
Use Ăşnicamente cables protegidos
para datos con este sistema. Esta
unidad ha sido evaluada con
cables de menos de 3 metros. Es
posible que los cables de mĂĄs de 3
metros no cumplan con el
desempeĂąo de clase B.
*  #$  ' $
 $
# '   
 &. +   $ 
 -
 
 #   $   $
 3   . 0  
& 
 $   $
- 3   " 
   #   .
‫ﺍﺳ ﺨﺪﻡ ﻓﻘﻂ ﻛﺎﺑﻼﺕ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻤﺼﻔﺢ ﻣﻊ‬
‫ ﺗﻢ ﺍﺧ ﺒﺎﺭ ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ ﺑﻮﺍﺳﻄﺔ‬.‫ﻫﺬﺍ ﺍﻟﻨﻈﺎﻡ‬
‫ﻄﺎﺑﻖ‬N‫ ﻗﺪ ﻻ ﺗ‬.‫ ﺃﻣ ﺎﺭ‬3 ‫ﻛﺎﺑﻼﺕ ﻳﻘﻞ ﻃﻮﻟﻬﺎ ﻋﻦ‬
‫ ﺃﻣ ﺎﺭ ﻣﻊ ﺃﺩﺍء‬3 ‫ﺍﻟﻜﺎﺑﻼﺕ ﺍﻟ ﻲ ﻳﺰﻳﺪ ﻃﻮﻟﻬﺎ ﻋﻦ‬
.B ‫ﺍﻟﻔﺌﺔ‬
‫יש להשתמש בכבלי נתונים מסוככים בלבד‬
‫ מערכת זו נבדקה באמצעות‬.‫עם מערכת זו‬
‫ כבלים‬.‫ מטרים‬3-‫כבלים באורך של פחות מ‬
‫ מטרים עלולים שלא לעמוד‬3-‫ארוכים יותר מ‬
.B ‫בביצועי דרגה‬
Honeywell
International Inc.
erklärt hiermit, dass
das nicht näher
spezifizierte SRD
folgende Richtlinien erfĂźllt:
• Richtlinie 2014/53/EU
(Funkanlagen)
• 2011/65/EU RoHS
(Recast)
Die vollständige EUKonformitätserklärung finden Sie
im Internet unter:
www.honeywellaidc.com/
compliance.
Ansprechpartner Europa:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
Niederlande
Honeywell
International Inc.
declara que el tipo de
equipo de radio,
dispositivo de corto
alcance (SRD) no especĂ­fico,
cumple con las directivas
siguientes:
• 2014/53/EU sobre equipos de
radio
• 2011/65/EU RoHS (Refundida)
El texto completo de la declaraciĂłn
de conformidad de la UE estĂĄ
disponible en la siguiente
direcciĂłn de internet:
www.honeywellaidc.com/
compliance.
Contacto europeo:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
PaĂ­ses Bajos
Honeywell
International Inc.
declara que el tipo de
equipo de radio, SRD
no especĂ­fico, es
conforme a las siguientes
directivas:
• Normativa 2014/53/UE sobre
equipos radioelĂŠctricos
• 2011/65/EU RoHS
(Reformulada)
El texto completo de la declaraciĂłn
de conformidad UE estĂĄ disponible
en la siguiente direcciĂłn de
internet: www.honeywellaidc.com/
compliance.
Contacto europeo:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
PaĂ­ses Bajos
Por meio deste
documento, a
Honeywell
International Inc.
declara que o tipo de
equipamento de rĂĄdio, sem SRD
especĂ­fico, estĂĄ em conformidade
com as seguintes diretivas:
• Equipamento de rádio 2014/53/
UE
• 2011/65/EU RoHS
(Reformulação)
O texto completo da declaração de
conformidade da UniĂŁo Europeia
estĂĄ disponĂ­vel em
www.honeywellaicd.com/
compliance.
Contato na Europa:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
Holanda
1
2   
Honeywell International
Inc.    , 


 %" $ 
  2 
  :
•    2014/53/ 

   
• 2011/65/EU    RoHS
(  )
; $  
 
  
   
www.honeywellaidc.com/
compliance.
<         :
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
Honeywell International
Inc. işbu belge ile radyo
ekipman tĂźrlerinin,
belirsiz SRD'nin ve
hücreselin, aşağıdaki
direktiflerle uyumlu olduğunu
beyan eder:
• 2014/53/EU Telsiz Ekipmanı
• 2011/65/EU RoHS (Yeni
dĂźzenleme)
AB uygunluk beyanÄąnÄąn tam
metnine şu internet adresinden
ulaşabilirsiniz:
www.honeywellaidc.com/
compliance.
Avrupa için iletişim:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
Hollanda
Honeywell ‫ﺗﻘﺮ ﺷﺮﻛﺔ‬
‫ﺔ‬.‫ ﺃﻥ ﻧﻮﻋ‬International Inc
U‫ﺎﺯ ﺍﻹﺭﺳﺎﻝ ﺍﻟﻼﺳﻠﻜ‬2X
SRD ‫ﺎﺯﺍ‬2X
‫ﺍﻟﻤﺼﻨﻒ ﺑﻜﻮﻧﻪ‬
ً
:‫ﺔ‬.‫ﻬﺎﺕ ﺍﻟ ﺎﻟ‬.‫ﺮ ﻣﺤﺪﺩ ﻳ ﻔﻖ ﻣﻊ ﺍﻟ ﻮﺟ‬.‫ﻏ‬
Honeywell International
‫ מצהירה בזאת כי סוג ציוד‬Inc
,‫ לא ספציפי‬SRD ,‫הרדיו‬
:‫עומד בהנחיות הבאות‬
VORSICHT. Ungeeignete
Ersatz-Akkus oder nicht
kompatible
Gerätenutzung kann zu
Verbrennungen, Feuer,
Explosion oder anderen Gefahren
fĂźhren. Entsorgen Sie Batterien
gemäß den lokalen Richtlinien.
PRECAUCIÓN: El
reemplazo inadecuado de
la baterĂ­a o el uso de un
dispositivo incompatible
pueden dar como
resultado quemaduras, un
incendio, explosiĂłn u otros riesgos.
Descarte todas las baterĂ­as segĂşn
las regulaciones locales.
PRECAUCIÓN: El
reemplazo inadecuado de
la baterĂ­a o el uso de un
dispositivo incompatible
puede presentar riesgo de
quemaduras, incendio, explosiĂłn,
u otro tipo de riesgos. Deseche las
baterĂ­as de acuerdo a las
normativas locales.
1*?@1*!
1 # 
  
 #  
 
 "
  $   "  
% ",  %,  
     " &  &
 $. F   $ 

 
 
     #  .
DÄ°KKAT: Pilin dĂźzgĂźn
takÄąlmamasÄą veya
uyumsuz cihaz kullanÄąmÄą
yanÄąk, yangÄąn, patlama ve
diğer tehlikelere neden
olabilir. Pilleri yerel dĂźzenlemelere
gĂśre bertaraf edin.
Hinweis zur Lasersicherheit
DeclaraciĂłn de seguridad
del LED
DeclaraciĂłn de seguridad
del LED
Declaração de segurança
do LED
Los LED se han probado y
clasificado como “GRUPO EXENTO
DE RIESGOS” según la normativa:
IEC 62471:2006.
Las LED han sido evaluadas y
clasificadas como “GRUPO LIBRE
DE RIESGOS” según la norma: IEC
62471:2006.
Os LEDs foram testados e
classificados como “GRUPO DE
RISCO ISENTO” conforme a norma:
IEC 62471:2006.
Use somente cabos de dados
blindados com este sistema. Esta
unidade foi testada com cabos
com menos de 3 metros. Cabos
com mais de 3 metros nĂŁo
atendem o desempenho de classe
B.
RF Exposure
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
Honeywell
International Inc.,
hereby declares that
the radio equipment
type, non-specific SRD,
is in compliance with the following
directives:
• 2014/53/EU Radio Equipment
• 2011/65/EU RoHS (Recast)
The full text of the EU declaration
of conformity is available at the
following internet address: www.
honeywellaidc.com/compliance.
European contact:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
Honeywell
International Inc.
dĂŠclare par la prĂŠsente
que le type
d'ĂŠquipement radio,
SRD non spĂŠcifique est conforme
aux directives suivantes :
• Équipement radio 2014/53/EU
• 2011/65/UE – RoHS (Refonte)
Le texte intĂŠgral de la dĂŠclaration
de conformitĂŠ de l'UE est
disponible Ă  l'adresse Internet
suivante :
www.honeywellaidc.com/
compliance.
Personne-ressource en Europe :
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
Les Pays-Bas
Honeywell
International Inc.
SRD
Honeywell International
Inc.
SRD
参
2014/53/EU
2011/65/EU RoHS
2014/53/EU
2011/65/EU RoHS
参
www.honeywellaidc.com/
compliance
CAUTION: Improper
battery replacement or
incompatible device
usage may result in risk of
burns, fire, explosion, or
other hazard. Dispose of batteries
according to local regulations.
SRD
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
ATTENTION : Un
remplacement inadĂŠquat
de la batterie ou une
utilisation incompatible
de l'appareil peut
prĂŠsenter des risques de brulures,
d'incendie, d'explosion ou d'autres
dangers. Jetez les piles
conformĂŠment aux rĂŠgulations
locales.
MISE EN GARDE : Le
remplacement incorrect
de la pile ou l'usage d'un
appareil non compatible
peut reprĂŠsenter des
risques de brĂťlures, d'incendie,
d'explosion ou d'autres dangers.
Éliminez les piles usagées
conformĂŠment aux
rĂŠglementations locales.
www.honeywellaidc.com/
compliance
Honeywell
International Inc.
dichiara che il tipo di
apparecchiature radio,
SRD (dispositivi a corto
raggio) non specifici è conforme
alle seguenti direttive:
• 2014/53/UE - Apparecchiature
radio
• Direttiva RoHS 2011/65/UE
(rifusione)
Il testo completo della
Dichiarazione di conformità UE è
disponibile al seguente indirizzo
Internet: www.honeywellaidc.com/
compliance.
Contatto in Europa:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
Paesi Bassi
Honeywell
International Inc.
SRD
Honeywell
International Inc.
2014/53/EU
2011/65/EU RoHS (
EU
www.honeywellaidc.com/
compliance
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
Honeywell
International Inc.
dĂŠclare par la prĂŠsente
que le type
d’équipement
radioĂŠlectrique de faible portĂŠe
non spĂŠcifique est conforme aux
directives suivantes :
• 2014/53/EU Équipement radio
• 2011/65/UE RoHS (refonte)
Le texte intĂŠgral de la dĂŠclaration
de conformité de l’UE est
disponible à l’adresse internet
suivante :
www.honeywellaidc.com/
compliance.
Contact en Europe :
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
Pays-Bas
• 2014/53/EU
• 2011/65/EU RoHS
(Recast)
EU
www.honeywellaidc.com/
compliance
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
Attenzione. La
sostituzione inadeguata
delle batterie o un uso
incompatibile del
dispositivo possono
causare rischi di ustioni, incendi,
esplosioni o altri pericoli. Smaltire
le batterie agli in conformitĂ  ai
regolamenti locali.
LED Safety Statement
LEDs have been tested and
classified as “EXEMPT RISK
GROUP” to the standard: IEC
62471:2006.
LED 安全声明
LED
GROUP)
LED
IEC 62471:2006
(EXEMPT RISK
CB Scheme
Certified to CB Scheme IEC 609501, Second Edition.
CB 方案
CB
Norme de sĂŠcuritĂŠ sur les
DEL
Les DEL ont ĂŠtĂŠ testĂŠes et classĂŠes
en tant que ÂŤ GROUPE DE RISQUE
EXEMPT Âť par rapport Ă  la norme :
IEC 62471:2006.
LED
LED
IEC 62471:2006
(EXEMPT RISK
GROUP)
Plan OC (organismes de
certification)
CertifiÊ CB CEI 60950-1, deuxième
ĂŠdition.
CB Scheme
IEC 60950-1
Norme de sĂŠcuritĂŠ DEL
Les DEL ont ĂŠtĂŠ testĂŠes et classĂŠes
ÂŤ GROUPE SANS RISQUE Âť selon
la norme : CEI 62471:2006.
CB Scheme IEC 60950-
LED
Disposizione di sicurezza
LED
I LED sono stati testati e
classificati come "GRUPPO
ESENTE DA RISCHI" rispetto allo
standard: IEC 62471:2006.
RISK GROUP (
EXEMPT
LED
GROUP"
IEC 62471:2006
"EXEMPT RISK
Die LEDs wurden geprĂźft und
gemäß der Norm IEC 62471:2006
unter „EXEMPT RISK GROUP“
eingestuft.
Заявление о безопасности
светодиода
LED
IEC 62471:2006
    -
 
   ÂŤMO0*
Garanzia prodotto.
‫ במקרה שמסמך זה תורגם‬.‫מסמך זה נכתב ויצא לאור בשפה האנגלית‬
‫לשפה אחרת וקיימת סתירה בין הגרסה האנגלית לבין הגרסה שאיננה‬
‫ מאחר וידוע וברור כי הגרסה‬,‫ הגרסה האנגלית תישאר תקפה‬,‫באנגלית‬
‫ כל הודעה או‬.‫האנגלית מבטאת את כוונת הצדדים בצורה הברורה ביותר‬
.‫תקשורת הניתנת בנוגע למסמך זה כוללת גרסה בשפה האנגלית‬
Bu belge, İngilizce olarak hazırlanmış ve yayınlanmıştır. Bu
belge başka bir dile çevrilirse ve İngilizce metin ile İngilizce
olmayan metin arasında ihtilaf oluşursa İngilizce metin
geçerli olacak ve İngilizce metnin taraflarĹn niyetini açĹkça
ifade ettiği kabul edilip onaylanacaktır. Bu belgeyle bağlantılı
olarak yapılan beyanlar veya yazışmalara İngilizce çevirileri
de eklenecektir.
For warranty information, go to www.honeywellaidc.com
and click Get Resources > Product Warranty.
Pour obtenir des renseignements sur la garantie, rendezvous sur www.honeywellaidc.com et cliquez sur Ressources
> Garantie du produit.
Pour obtenir des informations sur la garantie, rendez-vous
sur www.honeywellaidc.com et cliquez sur Get Resources
(Obtenir des ressources)> Product Warranty(Garantie du
produit).
Obtenga informaciĂłn sobre la garantĂ­a en
www.honeywellaidc.com y seleccione Get Resources
(Obtener recursos) > Product Warranty (GarantĂ­a del
producto.)
Para obtener informaciĂłn sobre la garantĂ­a, visite el sitio
www.honeywellaidc.com y haga clic en Obtener Recursos >
GarantĂ­a del producto.
Para ver informaçþes sobre a garantia, acesse
www.honeywellaidc.com e clique em Recursos >
Informaçþes de garantia.
Get Resources (
www.honeywellaidc.com
) > Product Warranty (
InformĂĄcie o zĂĄruke nĂĄjdete na www.honeywellaidc.com v
časti Get Resources (Získať zdroje) > Product Warranty
(Zåruka výrobku).
Honeywell International Inc.
9680 Old Bailes Road
Fort Mill, SC 29707 USA
Resources(
www.honeywellaidc.com
) > Product Warranty(
Get
Aby uzyskać informacje dotyczące gwarancji, należy
odwiedzić stronę www.honeywellaidc.com i kliknąć opcję
Get Resources > Product Warranty (Pobierz zasoby >
Gwarancja produktu).
\    #
  $ "
$   - $ www.honeywellaidc.com
   GetResources > Product Warranty
(
>       ).
www.honeywellaidc.com ‫ ﺍﺫﻫﺐ ﺇﻟ‬،‫ﻟﻼﻃﻼﻉ ﻋﻠ ﻣﻌﻠﻮﻣﺎﺕ ﺍﻟﻀﻤﺎﻥ‬
.‫ < ﺿﻤﺎﻥ ﺍﻟﻤﻨ ﺞ‬Get Resources ‫ﻭﺍﻧﻘﺮ ﻋﻠ‬
Get Resources
www.honeywellaidc.com
> Product Warranty
属
Garanti bilgileri için www.honeywellaidc.com adresinden Get
Resources (Kaynakları Edin) > Product Warranty (Ürün
Garantisi) öğesine tıklayın.
Informationen zur Garantie finden Sie auf unserer Website
www.honeywellaidc.com unter Get Resources > Product
Warranty.
www.honeywellaidc.com
) > Product Warranty (
Get Resources
Informace o zĂĄruce naleznete na strĂĄnce
www.honeywellaidc.com v části Získat zdroje > Záruka na
produkt.
‫ ולחץ‬www.honeywellaidc.com ‫ עבור אל‬,‫לקבלת מידע בנושא אחריות‬
‫ )מצא משאבים < אחריות‬Product Warranty < Get Resources ‫על‬
.(‫מוצר‬
8680-ML-RS Rev (b)
4/18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Honeywell Scanning & Mobility
Create Date                     : 2005:11:18 12:53:09Z
Keywords                        : Honeywell, Xenon, 1900
Modify Date                     : 2018:03:13 09:45:19-04:00
Subject                         : Xenon 1900 Quick Start Guide
Language                        : en
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Description                     : Xenon 1900 Quick Start Guide
Title                           : Xenon 1900 Quick Start Guide
Creator                         : Honeywell Scanning & Mobility
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : FrameMaker 2017.0.3
Metadata Date                   : 2018:03:13 09:45:19-04:00
Document ID                     : uuid:77a71aae-3f90-4e70-92a3-d0cf491edc8c
Instance ID                     : uuid:6510f7eb-098e-4675-b591-06f90d1fe194
Page Mode                       : UseNone
Page Count                      : 19

EXIF Metadata provided by EXIF.tools