Humax X1 11n Wireless Roaming Extender User Manual QG X1 100GB 16 0902 indd

Download:
Mirror Download [FCC.gov]
Document ID	3334671
Application ID	AqVO7Oiu1Wb1wqMEfr6HhQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.93kB (311684 bits)
Date Submitted	2017-03-27 00:00:00
Date Available	2017-05-11 00:00:00
Creation Date	2017-12-27 17:27:26
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-27 17:27:26
Document Title	QG_X1_100GB_16-0902.indd
Document Author:	parksh2

LEDs on the Front Panel
WPS
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Consult the dealer or an experienced radio/TV technician for help.
Setting up on Web Page
Setting up on Mobile
If you want to set the extender in more detail, you can set it up on your PC or mobile device.
1 Connecting Network Devices
4-2. Repeater
Wirelessly connect your network devices to the extender.
Note: You need a network name and password of the extender.
If you have a networking device other than HUMAX products, select it from the list and then enter the
password. You will experience stronger and wider Wi-Fi signal.
Login to the Mobile web
1. Open the web browser on your mobile device. If the web page does not appear, enter http://
dearmyrouter.net to the address bar.
Or, you can connect your PC to the LAN port of your extender through an Ethernet cable.
Click Next to set the connection with the host router.
2. Enter the ID and password. The default ID and password are admin and nnnn. nnnn is the last 4
digits of serial number. Refer to the serial number at the bottom of your product.
If you click WPS to connect to the host router automatically, 5. Extender Setting page does not appear.
Host Network
Note: We recommend you to change the ID and password to secure your network.
Go to Management > Change Password to change your password.
Extended Network
Repeater Setting
Select a device from the list below and enter the password to connect to the host device.
Using the WPS button on both devices, you can easily connect them.
QUANTUM Router
Internet
QUANTUM
Laptops
Tablets
Phones
2 Login to the Web
Refresh
Network Name (SSID)
CH
RSSI
Security
IPTime Zone
MAC Address
/2*,1
WPS
Band
KWWSGHDUP\URXWHUQHW
 !"#$%&
8VHU1DPH
DGPLQ
-45
WPA2-PSK
BC:76:70:7C:5C:74
TIANA_89
-47
WPA2-PSK
F8:D1:11:5C:84:BA
2.4GHz
2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key.
ASUS
-51
WPA2-PSK
70:7C:F8:D1:11:55
2.4GHz
3. Enter the ID and password. The default ID and password are admin and nnnn. nnnn is the last 4
digits of serial number. Refer to the serial number at the bottom of your product.
Wafya
-26
None
11:5C:54:D8:33:98
2.4GHz
1. Open the web browser.
2.4GHz
3DVVZRUG
/RJLQ
)RUWKHGHIDXOW,'DQGSDVVZRUG
VHHWKHERWWRPRIWKHSURGXFW
Note: We recommend you to change the ID and password to secure your network.
Go to Management > Change Password to change your password.
Password
Previous
**********
Next
:HOFRPHWR48$1780;
KWWSGHDUP\URXWHUQHW
,'
DGPLQ
 !"#$%&
3DVVZRUG
5 Extender Setting
Connection to Host
Enter your network name and password. The default name is the same as your host network.
/RJLQ
Note: We recommend the network share the same network name and password as your host network if
you configure the network with HUMAX products only.
)RUWKHGHIDXOW,'DQGSDVVZRUGVHHWKHERWWRPRIWKHSURGXFW
3 Welcome
If you use a third party product other than
HUMAX, click Other Products and go to
4-2 Repeater.
If you configure the network with HUMAX
products only, click HUMAX Products and go to
4-1. Roaming & Mesh.
Welcome to Quantum X1!
4. Select a host network from the list and enter the password.
([WHQGHU6HWWLQJ
Repeater Setting
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f86a9219-9e38-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:11 09:36:31Z
Create Date                     : 2017:07:11 09:36:31Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:f86a9219-9e38-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools