Hyundai IBT HQP50AH000 50” PDP Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	458196
Application ID	m0YmGckcfZiwTCPxTDfRcA==
Document Description	Users Manual 1 of 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	244.88kB (3060950 bits)
Date Submitted	2004-08-09 00:00:00
Date Available	2004-08-09 00:00:00
Creation Date	2004-07-16 08:29:41
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2004-07-16 09:36:44
Document Title	1
Document Creator	Wordìš© Acrobat PDFMaker 6.0
Document Author:	이 상 준

FCC ID : PJIHQP50AH000
ATTACHMENT E -1.
- USER’S MANUAL -
REPORT NO. : HCT-F04-0709
HYUNDAI C–TECH
Hyundai
Plasma Display
HQP421SR/421HR/501HR
User’s Guide
Service Center
USA
Hyundai ImageQuest America
(C/O : AVC Tech, Inc.)
777 Mark Street, Wood Dale, IL 60191
Tel : 800-568-0060, 630-595-0123
Fax : 630-595-2345
e-mail : avctech@avcusa.com
C/S Peter Lee
GERMANY
Hyundai ImageQuest Europe GmbH
Hajo-Rüter Str. 19, 65239 Hochheim
Tel : 06146 / 904 444
Fax : 06146 / 904 410
e-mail : service@hyundaiq.de
WWW : www.hyundaiq.com
JAPAN
Hyundai ImageQuest JAPAN
Shin-Hibiya Bldg, East 5F 1-3-6
Uchisaiwai-Cho, Chiyoda-ku,
Tokyo, Japan 100-0011
Tel : 03-5157-2286
Fax : 03-5157-2284
e-mail : pjkim@iqt.co.kr
C/S P.J.Kim
P/N 632 0237 *** Rev.00
w w w. h y u n d a i Q . c o m
FCC Information
User Instructions
The Federal Communications Commission Radio Frequency Interference Statement includes the
following warning :
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television receptions, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
User Information
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
HYUNDAI Plasma Display
DECLARATION OF CONFORMITY
WE
HYUNDAI ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment : PDP TV
Type-Designation
: PT42AS000 / PT42AH000 / HQP50AH000
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN 60950 : 2000
EMC : EN 55022 : 1998+A1 : 2000 Class B
EN 55024 : 1998+A1 : 2001
EN 61000-3-2 : 2000, EN 61000-3-3 : 1995+A1 : 2001
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA /MAY. 15, 2004
Place and date of issue)
HONG KI, KIM
(Name and signature of
authorized person)
Important Tips
Image Retention effect(Image Sticking) 
1. Cause :
- Image Retention Effect could be come from displaying a still picture in certain period of time with at
a certain area continuously, as the feature of Plasma Display Panel.
- This is the same matters to other companies' PDP products, too.
2. Preventation :
- To avoid this matter, use the product after reducing brightness and contrast, especially a still image
is displaying for a long time. (Example : Contrast 50, Brightness 50 - See the page 36)
Once Image retention occurs, change the mode into Video mode which displays more motion
pictures. It will help reduce this matter, but cannot completely eliminate once it occurs.
It makes the screen’s brightness worse as displaying a fixed pattern often.
- Use the fuction, Pixel Shift in still image, in our PDP products.
(For more details, see the below page 65)
3. Solution :
- The temporary image sticking would decrease with displaying Full-White pattern after 10 hours.
- The permanent image sticking couldn’t take off under the latest technology even though being in its
manufacturer.
4. Notice :
- It is very important to notify every buyer/customer this information and All Branches/Buyers
/Customers should be fully aware of this.
- Image Sticking in PDP products couldn’t get the support from a manufacturer, and does not come
under the warranty.
Second Tips 
• Pixel Defect :
Plasma Display Panel(PDP) is made of a group of refined pixels (cells). The Panel, in which 99.9% of
pixels have approved, is a normal product. Therefore, only a few of abnormal pixels may appear,
however, this has no influence upon PDP performance.
HYUNDAI Plasma Display
Image Sticking Precaution
Still Image/Panorama/Wide/4:3 in mortion Image 
Panorama, Wide, 4:3 aspect ratio
Box or Still image
• Precaution :
- Image Sticking could be come from Still Image and Boundary line for a long time display and
Brightness gap in Boundary.
- This Matter(Image Sticking) is same thing under the other PDP's Company.
- Still Image/Letter in watching TV also will be effect to Image sticking.
*This matter(Image Sticking) is out of warranty.
Features
A Wide Array of Screen Settings
You can choose different screen settings depending on the type of program you are watching or the
surrounding conditions (the lighting or the outside weather conditions).
You can switch among Sport, Movie, Music and Normal options or you can configure the screen settings for
yourself.
A Wide Array of Sound Settings
You can choose an optimal sound setting for the type of program you are watching.
You can switch among Music, Movie, News and Normal options or you can configure the settings for yourself.
SRS WOW(Surround) Audio Function
You can listen to dynamic and surround sound only with ordinary speakers.
Two Tuner Built-In
You can watch two channels at the same time and changing each channel.
PIP Viewing
You can watch TV or Text information at the same time while working on PC or watching VCR/DVD movies.
Various of the Aspect Ratio
You can adjust aspect Ratio as you want.
Auto On/Off Function
This fuction allows you to turn On/Off your PDP TV at the preset Time.
If there is no signal during a specific time period, power will be off.
Auto Detection Sound Format
When watching TV in Stereo/SAP mode, this function automatically detects transmission signaling to display
broadcasting status on the OSD.
HYUNDAI Plasma Display
Table of Contents
General Information
Sound Setup
Important Tips ......................................................................3
How to Select the Audio Mode ............................................47
Image Sticking Precaution ....................................................4
How to Set the Desired Audio .............................................48
Safety Precaution .................................................................5
How to Select AVL ..............................................................49
Contents of the Package .....................................................11
How to Select SRS WOW(Surround) ....................................50
Separately Sold Products ....................................................11
How to Select MTS(Multi-Channel Sound) ...........................51
Parts Names and Functions ................................................13
How to Set the Output of Subwoofer ...................................52
Remote Control ...................................................................15
How To Use Speakers (Standing Type) ...............................17
Channel Setup
How To Use Speakers (Desk Type) ......................................18
Memorizing the Channels ...................................................55
How To Install Wall Hanger Support ....................................19
Fine Tuning Channel Reception ...........................................56
How To Install Wall mount frame ........................................20
Storing Channels Manually .................................................57
How To Install Wall Hanger Support ....................................21
Using the LNA(Low-Noise-Amplifier) Feature ......................58
Connections
Function Setup
Connecting VHF and UHF Antenna........................................23
How to Select the Aspect Ratio ...........................................61
Connecting Cable TV ...........................................................23
Displaying Information ........................................................63
Before connecting the video/audio connections to
How to Set Key-Lock ..........................................................64
external devices ................................................................25
Using the Pixel Shift / Full White / Wiper Function ...............65
Connecting a VCR, Cable/Satellite Receiver .........................26
How to Freeze Picture .........................................................66
Connecting a DVD Player ....................................................27
How to Set DPMS ...............................................................67
Connecting a DTV(Digital Broadcast) Receiver .....................28
Choosing the Your Languages .............................................68
Playing Back a Tape Recorded On a Camcorder ..................29
How to Set Image Adjust in PC Mode ..................................69
Connecting to a PC(DVI, D-SUB) .........................................30
Viewing Closed Captions .....................................................71
Resolutions Supported in PC ...............................................31
Using the V-Chip .................................................................73
Scart Connection to the External Input ................................32
Clock Setup
Picture Setup
How to Set Clock ................................................................77
How to Select the Picture Mode ..........................................35
How to Set On Time ............................................................78
How to Set the Desired Picture ...........................................36
How to Set Off Time ............................................................80
How to Set Blue Screen ......................................................37
How to Set Sleep Time .......................................................82
How to Set Film Mode .........................................................38
How to Select a Color Temperature .....................................39
Appendix
How to Set PIP [Mode] ........................................................40
Glossary ............................................................................ 91
How to Set Multi-Screen [Input Source/Position/Size] .........41
Troubleshooting ................................................................. 93
How to Set Noise Reduction ................................................44
Care and Cleaning ............................................................. 95
Supported PIP Table ...........................................................45
Product Specifications ....................................................... 96
GENERAL INFORMATION
Safety Precaution
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
WARNING
If there is a persistent accumulation
of dusts or water on the plug, please
make sure to wipe it off using a dry
cloth.
- It may cause a fire or an electric shock.
Do not connect multiple electrical
appliances to a single outlet.
- It may cause a fire due to overheating from the
outlet.
WARNING
Do not install in a place where there
is oil, smoke, excessive humidity, or
where water may be sprinkled,
dripped, splashed on it.
- This may cause electric shock or fire.
Do not put a water bowl, filled with
liquids such as vases, candle, bug
repellant smoke, cigarette, plants,
or heavy thing on the PDP.
- It may cause electric shock or fire and also
heavy things may cause injury when they fall.
HYUNDAI Plasma Display
GENERAL INFORMATION
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
WARNING : When there is a possibility of serious injury or death if not observed.
ALERT : When there is a possibility of slight injury or product damage if not observed.
Do not use a damaged power cord
or plug, or loose outlet.
- They may cause electric shock or fire.
Firmly plug in the power cord so that
it does not pull out.
Never touch the power plug or
outlet with wet hands.
- An unstable connection may cause fire.
- This may cause electric shock.
Do not use or store a flammable
spray or inflammable things near the
PDP.
- They may cause explosion or fire.
Do not install on an unstable place
or small support.
Do not install the PDP in a
bookshelf, closet, or a place where
there is poor air circulation.
- This may cause the PDP to fall, resulting in
serious injury to a child or adult.
- Fire may be caused due to the rise of internal
temperature.
GENERAL INFORMATION
Safety Precaution
......................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
WARNING
Never attempt to open, fix, or modify
the PDP.
- When there is a need for fixing, call a service
center. Fire or electric shock may be caused.
Make the antenna cable loop at the entrance
of the building Any necessary action such as
making the antenna cable loop at the
entrance of the building should be taken to
prevent rainwater on the outdoor antenna
cable from possibly running into the indoor.
- If raindrop gets into the PDP, it may cause a fire
or an electric shock.
WARNING
Do not block ventilating slits.
- Blocking the ventilation slits prevents inner heat
from escaping, which may lead to a fire.
Any heat sources such as radiators
and heat registers, etc. on or near
the PDP.
- It may cause a fire.
HYUNDAI Plasma Display
GENERAL INFORMATION
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
WARNING : When there is a possibility of serious injury or death if not observed.
ALERT : When there is a possibility of slight injury or product damage if not observed.
When the PDP produces abnormal
noise, burning smell, or smoke,
unplug the PDP immediately and call
a service center.
- Electric shock or fire may be caused.
Do not put a metallic object like
chopstick, wire, or puncher or
inflammables like paper or a match
in a vent, headphone jack, or AV
jacks of the PDP.
When moving the PDP assembled
with speakers, make sure to detach
the speakers from it.
- If you carry the product holding the speakers, it
may cause the product to fall, causing serious
injury or damage.
- Electric shock or fire may be caused.
Unplug the product during lightning
or thunderstorms and never touch
the antenna cable.
- It may cause a fire or an electric shock.
Do not install the product on the
floor.
- If it falls over, your child may be injured.
Keep the remote control batteries
out of sight and out reach of
children.
- If your child swallows a battery, see your doctor
immediately.
GENERAL INFORMATION
Safety Precaution
......................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
WARNING
Do not place toys and cookies, etc.
on the PDP, which may attract
children’s attention. Children will
climb on the PDP to reach whatever
they have their eyes on.
- If it falls over on children, it may cause serious
injury.
Do not allow children to climb or
play on the PDP.
- If it falls over on children, it may cause serious
injury.
ALERT
Please avoid touching the panel at
the rear of LCD TV as it is producing
high temperature.
- Direct contact with the hot surface may cause
physical burns.
In the event of damaging or
dropping the product, switch off the
power and remove the plug.
- Using a damaged product may cause an electric
shock or a fire.
- Contact your local service center.
HYUNDAI Plasma Display
GENERAL INFORMATION
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
WARNING : When there is a possibility of serious injury or death if not observed.
ALERT : When there is a possibility of slight injury or product damage if not observed.
When replacing batteries, make
sure to match the batteries to the
(+) and (-) marks in the battery
compartment.
Alcohol
LUBRICANT
Benzene
- Mismatching of polarities may result in internal
damage to batteries, fire due to leakage or
contamination.
When cleaning the PDP, make sure to
disconnect the power plug and use a
dry, soft cloth for a cleanup.
Always use the standard batteries
and avoid using old batteries
together with new ones.
- Please avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquito spray,
air freshener, lubricant or synthetic
detergent.
- Otherwise it may result in internal damage to
batteries, fire due to leakage or contamination.
When moving the PDP, 2 or more
people are advised to carry it.
- Injury or damage may be caused when the PDP
falls.
Unplug when you do not use your
PDP for a long time.
- If dust is stacked on the PDP, electric shock or
fire may be caused from heat, fire, or
deterioration of insulation.
Consult a service center or customer
service for inside cleaning about
once a year.
- When dust is piled inside the PDP for long time,
fire or malfunction may be caused.
10
Contents of the Package
GENERAL INFORMATION
To purchase additional parts, consult a distributor or selling agent.
TE
MU
PO
WE
IEW
EV
PR
ILL
ST
UN
SO
CT
PE
AS
RE
TU
PIC
NE
AN
CH
MT
ME
LU
VO
AP
SW
UK
Japan
America/Canada
Europe
South Africa
Australia
SIZ
EP
SLE
/OF
ON
CE
UR
SO
PIP
NU
ME
TV/AV
TIO
CAP
INF
TEC
PRO
OW
H/L
HIG
TIO
AUT
PC.
RE
STO
/FLO
LIST
EX
IND
/MI
TTX
SUB
PAG
EAL
REV
SIZE
HOL
Power Cord
Remote Control/2 Batteries
(1.5V AAA)
User’s Guide
Antenna Cable
Korea
Separately Sold Products
If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.
Desk type speaker
stand
Desk type stand
11
Desk type speaker
HYUNDAI Plasma Display
GENERAL INFORMATION
Wall mounting frame
Adjustable wall mounting frame
Ceil mounting frame
DVI PC video(digital) cable
Component(Y, Pb, Pr) cable
S-video cable
Composite(Video & Audio) cable
PC signal cable
Scart cable
12
GENERAL INFORMATION
Parts Names and Functions
Front View
* The above image may look different from the real product.
Power button
Use this button to turn on or off the PDP.
Volume buttons
Use these buttons for your desired sound level.
These buttons also serve as the cursor of
Select/Adjust when in Menu mode.
Channel buttons
Use these buttons to change channels. These
buttons also serve as the cursor of Down and
Up buttons when in Menu mode.
13
Source button
Use this button to switch among inputs
connected to the PDP.
Menu button
Use this button to display or exit from menus.
Remote sensor and power LED
Point the remote control toward here.
It displays standby or operation status.
HYUNDAI Plasma Display
Rear View
GENERAL INFORMATION
Sub woofer output
If you wish to reproduce
the lower bass frequencies,
please connect the cable to
your Subwoofer speaker
with *AMP.
RS-232 input terminal
Connect to the RS-232
terminal of a PC for the
service check.
*For the control method
using this terminal, consult
an authorized PDP monitor
dealer.
Phone Jack(RS-232 Output)
Extend an RS-232 input.
DVI input terminal
Connect to the DTV receiver
with DVI terminal or to
external devices such as a
PC.
PC/DVI Audio input
terminal
Connect to the audio output
terminal of a PC.
D-SUB input terminal
Connect to the DTV
Receiver with D-Sub
terminal or to RGB output
terminal of a PC.
Audio input terminal for
DVD
Connect to the audio output
terminal of DVD player.
Component input terminal
for DVD or DTV
Connect to the Component
output terminal of DVD
player/DTV receiver.
Audio input terminal for
DTV Component
Connect to the audio output
terminal of DTV receiver.
Component input terminal
for DTV
Connect to the Component
output terminal of DTV
receiver.
S-video input terminal
Use this for the better video
quality than video input
terminal.
Video Composite input
terminal for VCR
Connect to the Composite
Video output terminal of
VCR or DVD player.
Audio input terminal for
VCR
Connect this when S-video
or Composite Video inputs.
Video output
This allows you to view the
current program from
another external source at
the same time.
Audio output
This allows you to hear the
sound for the current
program.
SCART input terminal
Use this for compositevideo input and audioinputs using scart cable.
ANT. input
This allows you to connect
your antenna.
Power input terminal
Power cord is connected
here.
Speaker terminal
Stand assembly
Speaker assembly
Carrying handles
Screw hole for fixing on a
wall
14
GENERAL INFORMATION
Remote Control
POWER
MUTE
+100
PREVIEW
SOUND
PICTURE ASPECT
STILL
VOLUME
CHANNEL
MTS
SLEEP
ON/OFF
SOURCE
SIZE
SWAP
PIP
MENU
EXIT
INFO
15
TV/AV
WIPER
PC AUTO
CAPTION
POWER/STANDBY
Use this button to turn the TV set on or off.
MUTE
Use this button to turn the sound off
completely.
NUMERIC KEYS
Use these buttons to select channels.
PREVIEW
Use this button to return to the previous
channel.
ASPECT RATIO
Use this button to quickly change the
picture format.
STILL
Use this button to freeze a picture.
VOLUME
Use this button to control the volume level
CHANNEL
Use these buttons to select channels.
SWAP
Use this button to switch what is being
shown on the main picture to the subpicture.
SIZE
Use this button to change the size of a subpicture.
SUB-PICTURE CHANNEL SELECTION
Use these buttons to select or adjust each
item of menu. Or you can select channels in
sub-pictures.
TV/AV buttons
Use this button to display the available
video sources.
(TV, Video, S-Video, DTV, DVD, PC, DVI, Scart
1, Scart 2)
PC AUTO
Use this button to automatically adjust
settings according to the frequency and
resolution selection in PC mode.
HYUNDAI Plasma Display
GENERAL INFORMATION
CAPTION
Use this button to displays the closed captions that are
broadcasted with certain TV shows.
INFORMATION
Use this button to display picture mode, resolution or
various program information.
WIPER
Use this button to prevent any possible ghosts. White
bar will pass through the TV screen to prevent ghosts.
EXIT
Use this button to exit from a menu.
SELECT/ADJUST
Select or adjust each item of menu.
MENU
Use this button to adjust screen, audio, channel,
function, time, etc.
SOURCE [MULTI SCREEN]
Use this button to select input signals for sub-pictures.
PIP (PICTURE IN PICTURE) ON/OFF
Use this button to watch more than one picture at once.
SLEEP
Use this button to allow your TV to turn off
automatically at designated time.
MTS
Use this button to display types of audio signals
currently aired on TV. Or you can use this button to
switch to other Sound Mode available.
SOUND
Use this button to select the status of sound.
PICTURE
Use this button to select the status of picture.
+100 KEY
Use this button to select the channel above 100
How to Insert Batteries in Remote Control
Press and hold ∆ part and push
to open cover.
Insert batteries with proper
polarities of + and - .
Use the remote control with cover
closed.
*Battery type : 1.5V/UM-3(AA/R06)
16
GENERAL INFORMATION
How To Use Speakers (Standing Type)
Parts configuration chart
2 Speakers (left and right)
4 brackets
16 fixing screws
2 sets of speaker cables
(left and right)
Assembly and Connection Method
Insert brackets into the grooves on
the rear of speakers and fasten them
with fixing screws.
(Left and right side each)
WARNING
17
Fasten with PDP body using fixing
screws. (Left and right side each)
Connect speaker cables between
terminals on the rear of speakers
with speaker connection terminals
on the rear of PDP. (Connect cables
and terminals in the same color)
Do not move the product holding the speakers. Always use handles on the PDP.
(Brackets connecting PDP and speakers may be damaged.)
HYUNDAI Plasma Display
How To Use Speakers (Desk Type)
GENERAL INFORMATION
Parts configuration chart
2 Speakers (left and right)
2 Speaker-stands
(left and right)
8 fixing screws
2 sets of speaker cables
(left and right)
Assembly and Connect method
Insert speaker-stands in the grove
on the bottom of speakers and
fasten them sing fixing screws.
(Left and right side each)
Upright and place them on
desired place left and right of PDP.
(Left and right side each)
Connect speaker cables between
terminals on the rear of speakers and
speaker connection terminals on the
rear of PDP. (Connect cables and
terminals in the same color)
18
GENERAL INFORMATION
How To Install Wall Hanger Support
1. Caution
2. Parts configuration chart
1. Install on the vertical wall surface only.
2. Do not install on the following places to protect the
performance of PDP and to prevent malfunction.
Near sprinkler Detector
Near heating devices
Places where vibration or shock may be applied
Near high voltage electric power line
3. Install in a proper method with the structural materials of the
wall. If the wall is not strong enough to stand weight of PDP
set, reinforce the wall surface before installation.
Wall mount frame
4. Do not install within a wall.
4 screws
Spring washer
4 plastics for
mount frame
3. Angle Adjustment(Option)
The angle of PDP may be adjusted from 0 degree to 20 degree in 5 steps with 5 degrees.
Use the angle adjustable hole on the side of fixing panel when adjustment is needed.
(This function is supported with angle adjustable type wall mount frame only.)
50 angle
100 /00 angle
150 angle
200 angle
50 angle
150 angle
No angle
* Fixed type wall mount frame does not support angle adjustable function.
19
Angle adjustable hole
HYUNDAI Plasma Display
How To Install Wall mount frame
GENERAL INFORMATION
4. Installation Method
1. Unscrew screws fasted on four spots on the back of PDP.
3. Fix the wall mount frame on the wall with screws or
nails.
2. Fasten the screws and plastics for mount frame on the
spot where screws were as shown on the picture.
4. Hang the plastics for the mount frame on the wall mount
frame. (If the PDP is lifted too much, the hanging plastic
may be separated.)
20
GENERAL INFORMATION
How To Install Wall Hanger Support
1. Place the PDP body on a flat desk or shelf. Clean the surface of the desk or shelf in order to prevent scratch on the
product.
2. Align the stand with PDP body below and fasten the stand bars using 4 fixing screws.
3. After the assembly is over, stand the assembled product at a desired place.
Fixing screws
Desk type stand
Warning : Do not install at an unstable place or on a small support.
(When a child plays around the product and touch it, PDP may fall and injure the child.)
21
H Y U N DA I P L A S M A D I S P L AY
Connections
Connecting VHF and UHF Antenna............................................23
Connecting Cable TV ................................................................23
Before connecting the video/audio connections to
external devices .....................................................................25
Connecting a VCR, Cable/Satellite Receiver ............................26
Connecting a DVD Player .........................................................27
Connecting a DTV(Digital Broadcast) Receiver ........................28
Playing Back a Tape Recorded On a Camcorder ......................29
Connecting to a PC(DVI, D-SUB) .............................................30
Resolutions Supported in PC ...................................................31
Scart Connection to the External Input ....................................32
Connecting VHF and UHF Antenna
Antenna with 75-ohm Round Leads
If your antenna looks like this :
it has 75-ohm round leads.
;+):<
)6<16
;+):<
>0.=0.
;+):<
>0.=0.
;+):<
>0.=0.
CONNECTIONS
Plug the antenna lead into the VHF/UHF terminal on the PDP.
Use the Antenna Cable, an acessary included in the product package.
Connecting Cable TV
You can connect different cable systems to your PDP, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
;+):<
)6<16
Plug the incoming cable into the VHF/UHF terminal on the PDP.
Use the Antenna Cable, an accessory included in the product package.
Cable with a Cable Box that Descrambles All Channels.
Find the cable connected to the ANTENNA OUT
terminal on your cable box. This terminal might be
labeled "ANT OUT", "VHF OUT", or simply "OUT".
Connect the cable to the VHF/UHF terminal on the
PDP.
Use the Antenna Cable, an accessory included
in the product package.
;+):<
23
)6<16
HYUNDAI Plasma Display
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables.
Find and disconnect the cable that is connected to the
ANTENNA IN terminal of your cable box.
This terminal might be labeled "ANT IN", "VHF IN",
or simply, "IN". Connect this cable to a two-way splitter.
Connect a coaxial cable between an OUTPUT terminal
of the splitter and the IN terminal of the cable box.
Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
Connect the last coaxial cable between the
OUT terminal of the RF (A/B) switch and
the VHF/UHF terminal on the PDP.
CONNECTIONS
,>,+75876-6< Q XX Q
>1,-7+7587;1<-16
0)4.;+):<
8J
.=44;+):<
)6<16
>0.=0.
8Z
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.)
24
Before connecting the video/audio connections to external devices .....
Please make sure to read the following information on connection to enjoy best picture quality.
Video/Audio connectors
CONNECTIONS
Types of video/audio cable :
➀ DVI-D ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE ➅ FULL SCART ➆ HALF SCART
Best picture quality is displayed in the following order.
DVI-D, D-Sub
COMPONENT
S-VIDEO
The superior picture quality starts from the far left side.
25
COMPOSITE
HYUNDAI Plasma Display
Connecting a VCR, Cable/Satellite Receiver
Connection Method
Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver and
Video/S-Video input terminal of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellite
receiver and Audio input terminal of PDP.
(Connect cables and terminal in the same colors)
CONNECTIONS
>1,-7+7587;1<-7=<
8J
8Z
,>,+75876-6< Q XX Q
>1,-7+7587;1<-16
;+):<
VCR/Cable Receiver
)6<16
4
>1,-7 ;>1,-7
:
8J
)6<16
;+):<
>0.=0.
8Z
)6<7=<
)=,17
POWER Cable
AUDIO Cable
S-VIDEO Cable
or
VIDEO Cable
How to Watch
Turn on your PDP and press
Press
TV/AV
on remote control unit.
to move between entries. And press
Video or S-Video.
to select
CURRENT : S-VEDIO
TV
VIDEO
S-VIDEO
SCART 1
SCART 2
DVD
DTV
PC
DVI
CONNECT
CONNECT
NO
NO
NO
NO
CABLE
CABLE
CABLE
CABLE
Use S-video cables for better picture quality.
26
Connecting a DVD Player
CONNECTIONS
Connection Method
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input
terminals(Y, Pb, Pr) of DVD(480i/480p/720p/1080i) on the rear of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD Audio on
the rear of PDP.
(Connect cables and terminal in the same colors)
>1,-7+7587;1<-7=<
DVD Player
8J
8Z
,>,+75876-6< Q XX Q
;=*?7.-:
7=<8=<
>1,-7+7587;1<-16
;+):<
;>1,-7 +75876-6<>1,-7 >1,-7
8J
.=
8Z
)=,17
AUDIO Cable
VIDEO(Y, Pb, Pr) Cable
How to Watch
Turn on your PDP and press
Press
DVD.
TV/AV
on remote control unit.
to move between entries. And press
to select
CURRENT : DVD
TV
VIDEO
S-VIDEO
SCART 1
SCART 2
DVD
DTV
PC
DVI
Output terminal mark(Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr.
(It depends on DVD player)
27
NO
NO
CABLE
CABLE
CONNECT
NO CABLE
NO CABLE
NO CABLE
HYUNDAI Plasma Display
Connecting a DTV(Digital Broadcast) Receiver
Connection Method
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input terminals(Y,
Pb, Pr) of DTV(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the same colors)
Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal for DTV Audio
on the rear of PDP. (Connect cables and terminal in the same colors)
DTV Receiver
>1,-7+7587;1<-7=<
8J
8Z
,>,+75876-6< Q XX Q
>1,-7+7587;1<-16
;=*?7.-:
7=<8=<
;+):<
;>1,-7 +75876-6<>1,-7 >1,-7
CONNECTIONS
8J
.=
8Z
)=,17
AUDIO Cable
VIDEO(Y, Pb, Pr) Cable
How to Watch
Turn on your PDP and press
Press
DTV.
TV/AV
on remote control unit.
to move between entries. And press
to select
CURRENT : DTV
TV
VIDEO
S-VIDEO
SCART 1
SCART 2
DVD
DTV
PC
DVI
NO
NO
CABLE
CABLE
NO CABLE
CONNECT
NO CABLE
NO CABLE
To watch digital broadcast, you have to separately purchase a digital set-top box and connect it to PDP.
28
Playing Back a Tape Recorded On a Camcorder
CONNECTIONS
Connection Method
Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal of
PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder /Game
player and Audio input terminal of PDP.
(Connect cables and terminal in the same colors)
>1,-7+7587;1<-7=<
Game Player
Camcorder
8J
8Z
,>,+75876-6< Q XX Q
>1,-7+7587;1<-16
?7.-:
=<8=<
;+):<
4
>1,-7
8J
;+):<
)6<16
>0.=0.
8Z
:
)=,17
POWER Cable
AUDIO Cable
VIDEO Cable
How to Watch
29
Turn on your PDP and press
Press
Vedio.
TV/AV
on remote control unit.
to move between entries. And press
to select
CURRENT : VEDIO
TV
VIDEO
S-VIDEO
SCART 1
SCART 2
DVD
DTV
PC
DVI
CONNECT
NO CABLE
NO
NO
NO
NO
CABLE
CABLE
CABLE
CABLE
HYUNDAI Plasma Display
Connecting to a PC(DVI, D-SUB)
Connection Method
Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminal of a PDP.
In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PC and input terminal for
DVI of PDP.
Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP. (Connect
cables and terminal in the same colors)
CONNECTIONS
>1,-7+7587;1<-7=
8J
8Z
,>,+75876-6< Q XX Q
>1,-7+7587;1<-16
;=*?7.-:
7=<8=<
8J
8Z
AUDIO Cable
DVI Cable(DIGITAL)
or
D-SUB Cable(15pin)
When Using As a PC Monitor
Turn on your PDP and press
Press
TV/AV
on remote control unit.
to move between entries. And press
to select
PC or DVI.
CURRENT : PC
TV
VIDEO
S-VIDEO
SCART 1
SCART 2
DVD
DTV
PC
DVI
NO
NO
CABLE
CABLE
NO CABLE
NO CABLE
CONNECT
CONNECT
DVI cable provides better picture quality.
This product supports plug-and-play function.
We recommend the above method if the satellite receiver supports DTV signal
with DVI(Digital) and D-sub(15 pin) cable for the better quality picture.
30

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 34
Language                        : EN-US
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:77c42a2d-5bc1-4bff-8d8c-d0681d05aaf7
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : 현대 원스탑 인증센터
Source Modified                 : D:20040715140344
Headline                        : 
Create Date                     : 2004:07:16 08:29:41+09:00
Creator Tool                    : Word용 Acrobat PDFMaker 6.0
Modify Date                     : 2004:07:16 09:36:44+09:00
Metadata Date                   : 2004:07:16 09:36:44+09:00
Document ID                     : uuid:ccfc29cf-dda0-4f87-82e6-2b4233cd3ce7
Version ID                      : 2
Format                          : application/pdf
Title                           : 1
Creator                         : 이 상 준
Subject                         : 
Tagged PDF                      : No
Author                          : 이 상 준

EXIF Metadata provided by EXIF.tools