Hyundai IBT HQP50AH000 50” PDP Monitor User Manual 1
Hyundai IBT Corp. 50 PDP Monitor 1
Contents
- 1. Users Manual 1 of 3
- 2. Users Manual 2 of 3
- 3. Users Manual 3 of 3
Users Manual 2 of 3
FCC ID : PJIHQP50AH000 ATTACHMENT E -2. - USER’S MANUAL - REPORT NO. : HCT-F04-0709 HYUNDAI C–TECH Resolutions Supported in PC Resolution Horizontal frequency Vertical frequency 31.47 70.09 37.86 85.08 31.47 59.94 37.86 72.80 37.50 75.00 43.27 85.01 31.47 70.08 37.88 60.32 48.08 72.18 46.88 75.00 53.67 85.06 49.72 74.55 48.36 60.00 60.02 75.03 68.68 85.00 CONNECTIONS 640 x 350 640 x 480 720 x 400 800 x 600 832 x 624 1024 x 768 * Recommended Resolution is 1024x768@60Hz : HQP421HR / HQP501HR * Recommended Resolution is 800x600@60Hz : HQP421SR 31 HYUNDAI Plasma Display Scart Connection to the External Input Connection Method This end can be fitted with : A Scart connector CONNECTIONS If you have video player that is supported CVBS, You can use Scart 1, Scart 2 port. 8J 8Z 8J 8Z >1,-7+7587;1<-16 0)4.;+):< SET TOP BOX )6<16 .=44;+):< >0.=0. VCR DVD ;>1,-7 +75876-6<>1,-7 >1,-7 )=,17 Video Game Device Power Cable Video Disc Player VIDEO(CVBS) + Audio(L/R) Satellite Receiver “A” How to Watch Turn on your PDP and press Press TV/AV on remote control unit. to move between entries. And press Scart 1 or Scart 2. to select CURRENT : SCART 1 TV VIDEO S-VIDEO SCART 1 SCART 2 DVD DTV PC DVI NO CABLE NO CABLE CONNECT NO CABLE NO CABLE NO CABLE NO CABLE NO CABLE You can use composite video by scart 1/2, connector please contact your local service center about “A” cable. 32 33 CONNECTIONS H Y U N DA I P L A S M A D I S P L AY Picture Setup How to Select the Picture Mode ..............................................35 How to Set the Desired Picture ................................................36 How to Set Blue Screen ...........................................................37 How to Set Film Mode .............................................................38 How to Select a Color Temperature .........................................39 How to Set PIP [Mode] .............................................................40 How to Set Multi-Screen [Input Source/Position/Size] ............41 How to Set Noise Reduction ....................................................44 Supported PIP Table .................................................................45 How to Select the Picture Mode Users can adjust picture mode automatically accrding to the input mode(TV, Video, S-Video, F/H Scart, DVD, DTV). PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Picture” icon. Press Left and Right buttons to select “MODE”. PICTURE MODE PICTURE CUSTOM BLUE SCREEN S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT MENU PICTURE MODE PICTURE S TA N D A R D CUSTOM COLOR TEMP PIP NOISE REDUCT Press Left and Right buttons, then the menu changes in order below. Standard DYNAMIC Movie MILD User EXIT + 000 MOVE BLUE SCREEN FILM MODE OFF SELECT OFF OFF S TA N D A R D MOVE + 000 MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. STANDARD : For general contents. It fits most video contents. DYNAMIC : For a clear display. MOVIE : For movies. MILD : For a soft display. USER : When the user wants to set the values see the next page PICTURE How To Directly Select Picture Mode : Press button. - Users can select Standard DVD, DTV. Dynamic Mild - Users can select Standard Low(Text Mode) Movie USER, when the input mode is TV, S-Vedio, Scart 1/2, High(Movie), when the input mode is PC or DVI. In the user’s mode, the users can adjust at thier preference contrast, brightness, sharpness, color, tint at standard, dynamic, movie, or mild mode. *Adjustments menu may be different according to the input source. 35 HYUNDAI Plasma Display How to Set the Desired Picture Users can manually adjust the picture in their own ways. MENU Press Menu button. Menu items appear on the screen. PICTURE Press Left and Right buttons to select “PICTURE” S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT Press Left and Right buttons to select “CUSTOM”. Picture Custom menu appears. Choose one of the items listed, then Press Left and Right buttons to adjust. EXIT MENU PICTURE MODE PICTURE S TA N D A R D CUSTOM COLOR TEMP PIP NOISE REDUCT + 000 MOVE BLUE SCREEN FILM MODE Press Up and Down buttons to move to “CUSTOM”. OFF PICTURE SETUP Press Up and Down buttons to move to “Picture” icon. MODE PICTURE CUSTOM BLUE SCREEN SELECT OFF OFF S TA N D A R D + 000 MENU MOVE PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT SELECT MOVE CUSTOM 080 070 050 050 050 MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. CONTRAST : Adjust the brightness and darkness of object and background. BRIGHTNESS : Adjust the brightness of the entire picture. SHARPNESS : Adjust clarity of outline of objects. COLOR : Adjust colors into deeper or lighter colors. TINT : Adjust colors naturally. This only applies to NTSC mode. Setting of Color and Tint is not supported in PC, DVI and DTV input modes. 36 How to Set Blue Screen If there is no broadcast or no signal from a connected external device, your PDP will show a blue screen. If a broadcast signal comes in, the blue screen will be converted to a normal screen. PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Picture” icon. Press Left and Right button to select “PICTURE”. PICTURE MODE PICTURE CUSTOM BLUE SCREEN S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT MOVE Press Left and Right button to “ON/OFF”. EXIT MENU S TA N D A R D CUSTOM COLOR TEMP PIP NOISE REDUCT + 000 PICTURE MODE PICTURE BLUE SCREEN FILM MODE Press Up and Down button to move to “BLUE SCREEN”. OFF SELECT MOVE OFF OFF S TA N D A R D + 000 MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. In the status of Blue Screen active, when the main picture receives no signal during watching a TV or VCR program as a main picture while viewing a VCR or TV program as a sub picture in PIP mode, the entire screen (including both main and sub pictures) will turn blue. When the main picture signal comes back, the both pictures will be restored to normal. 37 HYUNDAI Plasma Display How to Set Film Mode Set Film Mode to receive a crisp, clear picture without flickering. MENU Press Menu button. Menu items appear on the screen. Press Left and Right button to select “PICTURE”. S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT MOVE Press Left and Right button to “ON/OFF”. EXIT MENU S TA N D A R D CUSTOM COLOR TEMP PIP NOISE REDUCT + 000 PICTURE MODE PICTURE BLUE SCREEN FILM MODE Press Up and Down button to move to “FilM mode”. OFF PICTURE SETUP Press Up and Down buttons to move to “Picture” icon. PICTURE MODE PICTURE CUSTOM BLUE SCREEN SELECT MOVE OFF OFF S TA N D A R D + 000 MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. You may experience the distortion of the screen edge during a DVD or VCR playback. This may be caused by bad edit of a film (a DVD title or tape). If you have come across this symptom, select OFF in the Film Mode. 38 How to Select a Color Temperature Users can adjust Color as users want. PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Picture” icon. Press Left and Right button to select “PICTURE” icon. PICTURE MODE PICTURE CUSTOM BLUE SCREEN S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT MOVE Press Up and Down button to move to “COLOR TEMP”. Press Left and Right button, then Mode changes in order below. Standard Cool Warm S TA N D A R D WARM : Warm colors with reddish tone. 39 SELECT MOVE Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. COOL : Cool colors with bluish tone. MENU CUSTOM COLOR TEMP PIP NOISE REDUCT STANDARD : Colors for general picture. + 000 PICTURE MODE PICTURE BLUE SCREEN FILM MODE EXIT OFF OFF OFF S TA N D A R D + 000 MENU HYUNDAI Plasma Display How to Set PIP [Mode] This is to set PIP(Picture In Picture) mode or Twin mode. MENU Press Menu button. Menu items appear on the screen. Press Left and Right button to select “PICTURE” icon. S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT + 000 MENU MOVE PICTURE MODE PICTURE S TA N D A R D CUSTOM OFF OFF BLUE SCREEN FILM MODE S TA N D A R D COLOR TEMP PIP NOISE REDUCT Press Up and Down button to move to “PIP”. Press Left and Right button to select “PIP”. Menu items appear on the screen. SELECT + 000 MENU MOVE PIP OFF TV MODE SOURCE S WA P LARGE S WA P SIZE POSITION RIGHT DOWN 037 CHANNEL Press Up and Down button to move to “MODE”. Press Left and Right button, then Mode changes in order below. PIP TWIN OFF Main OFF PICTURE SETUP Press Up and Down buttons to move to “Picture” icon. PICTURE MODE PICTURE CUSTOM BLUE SCREEN SELECT Main MOVE MENU Sub Sub PIP : To watch the Sub screen in the main screen at once. TWIN : To watch two screens in half and half. After setting this, go to step 7 to set the SOURCE. 40 How to Set Multi-Screen [Input Source/Position/Size] This is to set the Input Source, Position and Size of the Sub-picture. (This function is available only when PIP mode active.) PICTURE SETUP Press Up and Down buttons to move to “SOURCE”. Press Left and Right button, then source changes in order below. DTV DVD S-Video TV SCART 1 SCART 2 PC DVI PIP OFF TV S WA P MODE SOURCE S WA P LARGE RIGHT DOWN 037 SIZE POSITION CHANNEL SELECT MOVE MENU In case of PIP mode, go to step 9 if you need to set the “SWAP” of Main and sub pictures. Press Up and Down buttons to move to “SWAP”. PIP OFF TV MODE SOURCE S WA P LARGE S WA P SIZE POSITION RIGHT DOWN 037 CHANNEL 10 Press Left and Right buttons. SELECT MOVE MENU In case of PIP mode, go to step 11 if you need to set the “SIZE” of Sub picture. 11 Press Up and Down buttons to move to “Size”. PIP OFF TV S WA P MODE SOURCE S WA P LARGE RIGHT DOWN 037 SIZE POSITION CHANNEL 12 Press Left and Right buttons to set to “LARGE/SMALL”. In case of PIP mode, go to step 13 if you need to set the “POSITION” of Sub picture. 13 41 Press Up and Down buttons to move to “POSITION”. SELECT MOVE MENU HYUNDAI Plasma Display Press Left and Right button, then position changes in order below. Right Down Left Down Left Up Right Up 14 In case the Input source in Sub picture is TV, go to step 15 when you wish to change the channels of Sub picture. Press Up and Down buttons to move to “Channel”. 15 PIP OFF TV S WA P MODE SOURCE S WA P LARGE RIGHT DOWN 037 SIZE POSITION CHANNEL SELECT MOVE MENU PIP OFF TV MODE SOURCE S WA P LARGE S WA P SIZE Press Left and Right button to select “Channel Number”. 16 EXIT SELECT MOVE PICTURE SETUP RIGHT DOWN 037 POSITION CHANNEL MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. Adjust the location in PIP Adjust the size in PIP For details on Hot-keys on the remote control, please go to the next page. 42 Hot-Keys on the Remote Control ON/OFF How to Directly Turn PIP FUNCTION ON/OFF : Press PIP button. To turn ON/OFF the PIP function SIZE How To Directly Adjust PIP MODE & SIZE : Press button. To watch PIP/TWIN ways or to adjust the Size of Sub picture. Large Small TWIN PICTURE SETUP SOURCE How To Directly Change Sub Source : Press button. Press Up and Down buttons to move to the Sub Source. And select using Left or Right button. SWAP How To Directly Set The SWAP : Press button. To swap the Main picture and sub picture. How To Directly Set The Sub Channel : Press button. Main and sub pictures cannot have the same input source. 43 CURRENT : TV TV VIDEO S-VIDEO SCART 1 SCART 2 DVD DTV PC DVI NO NO CABLE CABLE NO NO NO NO CABLE CABLE CABLE CABLE HYUNDAI Plasma Display How to Set Noise Reduction This is to eliminate some noise on the screen in Video mode. MENU Press Menu button. Menu items appear on the screen. Press Left and Right button to select “PICTURE”. S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT OFF S TA N D A R D SELECT MOVE Press Left and Right button to adjust Screen quality. EXIT MENU S TA N D A R D CUSTOM COLOR TEMP PIP NOISE REDUCT + 000 PICTURE MODE PICTURE BLUE SCREEN FILM MODE Press Up and Down button to move to “NOISE REDUCT”. OFF PICTURE SETUP Press Up and Down buttons to move to “Picture” icon. PICTURE MODE PICTURE CUSTOM BLUE SCREEN SELECT MOVE OFF OFF S TA N D A R D + 000 MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. In the Noise Reduction, the more you reduce the screen noise, the more the sharpness level of the pictures may become degraded. 44 Supported PIP Table PIP : O → Supported, X → Not Supported Sub PC DVI DTV DVD TV S-Video Video Scart 2 Scart 1 PC DVI DTV DVD TV S-Video Video Scart 2 Scart 1 PICTURE SETUP Main 45 H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Sound Setup How to Select the Audio Mode ................................................47 How to Set the Desired Audio ..................................................48 How to Select AVL ....................................................................49 How to Select SRS WOW(Surround) ........................................50 How to Select MTS(Multi-Channel Sound) ...............................51 How to Set the Output of Subwoofer .......................................52 How to Select the Audio Mode Users can adjust sound mode automatically as users want. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “MODE”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE SOUND S TA N D A R D MODE CUSTOM OFF OFF AV L SRS WOW SOUND SETUP MTS SUB Press Left and Right button, then the menu changes in order below. Standard Music Movie News User EXIT WOOFER SELECT STANDARD : For the general sound. This fits most audio contents. MUSIC : For enjoying original sound. MOVIE : For grandiose sound. NEWS : For the clear sound. USER : When the user wants to set the value see the next page SOUND Users can select STANDARD 47 MONO MOVE Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. How To Directly Select Picture Mode : Press MUSIC MOVIE button. NEWS MENU USER in order. MENU HYUNDAI Plasma Display How to Set the Desired Audio Users can manually adjust the sound in thier own ways. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE MENU SOUND S TA N D A R D MODE CUSTOM OFF OFF AV L SRS WOW MTS SUB Press Left and Right buttons to select “SOUND custom”. Sound Custom menu appears. Choose one of the items listed, then Press Left and Right buttons to adjust. EXIT WOOFER SELECT MOVE SOUND SOUND SETUP Press Up and Down buttons to move to “SOUND custom ”. MONO MENU CUSTOM VOLUME BALANCE 10 +00 EQUALIZER 100Hz SELECT 13 500Hz 14 13 1.5K 5K MOVE 12 10K MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. VOLUME : Adjusts the volume. BALANCE : Adjusts the balance of left and right speakers. EQUALIZER : Adjusts the audio output signal in the desired band. 48 How to Select AVL This function automatically gives a similar volume size to each channel. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE SOUND MODE SOUND S TA N D A R D CUSTOM ON OFF AV L SRS WOW SOUND SETUP MTS SUB Press Up and Down buttons to move to “AVL”. Press Left and Right buttons to “ON/OFF”. EXIT 49 MENU MONO WOOFER SELECT MOVE Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. MENU HYUNDAI Plasma Display How to Select SRS WOW(Surround) You can enjoy the spectacular, clear and crisp sound. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE SOUND S TA N D A R D MODE CUSTOM OFF ON AV L SRS WOW MTS SUB Press Up and Down buttons to move to “SRS WOW”. Press Left and Right buttons to “ON/OFF”. EXIT MONO WOOFER SELECT MOVE SOUND SETUP MENU MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. The SRS WOW function is activated only when the audio input signal is Stereo. is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc. Remarkable Enhancement for Mono or Stereo Playback WOWTM‚ is an award-winning, patented technology that significantly enhances the quality of mono and stereo audio material. It creates the perception of improved dynamics and bass performance over standard speakers or headphones. WOW makes up for the limitations inherent in smaller speakers and headphones by providing a panoramic three-dimensional audio image that extends the sound in both the horizontal and vertical planes well beyond the speakers or headphones themselves. As a result, manufacturers of small audio devices, televisions, wireless and personal/portable products can dramatically improve their product’s audio performance without enlarging the speaker size. The enriching effects of WOW are especially noticeable on digitally compressed mono or stereo audio in formats such as MP3, WMA and audio CD in which the “tinny” hollow sound is greatly reduced. 50 How to Select MTS(Multi-Channel Sound) Depending on the particaular program being brodcast, you can select to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information like news or weathter.) MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB Press Up and Down buttons to move to “Sound” icon. Press Left and Right buttons to select “Sound”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE MENU SOUND MODE SOUND S TA N D A R D CUSTOM OFF OFF AV L SRS WOW SOUND SETUP MTS SUB Press Up and Down buttons to move to “MTS”. Press Left and Right buttons, Repeatedly to select “MONO”, “STEREO” or “SAP”. EXIT MONO WOOFER SELECT MOVE MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. MTS How To Directly Select MTS : Press button. Repeatedly to select “MONO”, “Stereo” or “SAP”. - Choose “Stereo” for channels that are broadcasting in STEREO. - Choose “MONO” for channels that are broadcasting in MONO, or if you are having difficultly receiving a STEREO signal. - Choose “SAP” to listen to the seperate audio program, which is usually a foreign-language translation. If the signal reception conditions deteriorate, setting to Mono will make your listening condition better. 51 HYUNDAI Plasma Display How to Set the Output of Subwoofer You can set this function when you wish to install your subwoofer speaker system. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “SOUND”. Press Left and Right buttons to select “SUB WOOFER”. Sub Woofer menu appears. Choose item, then Press Left and Right buttons to adjust. EXIT MOVE MENU SOUND S TA N D A R D OFF OFF WOW MONO WOOFER SELECT MOVE SUB MENU WOOFER OFF MODE VOLUME 020 200 FREQENCY SELECT SOUND SETUP WOOFER MODE CUSTOM MTS SUB Press Up and Down buttons to move to “SUB WOOFER”. OFF OFF MONO WOW SELECT AV L SRS S TA N D A R D MODE CUSTOM AV L MOVE Hz MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. - The frequencies in the entry are the subwoofer’s frequency range. - You make sure to use a subwoofer speaker system with built-in amplifier. 52 53 SOUND SETUP H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Channel Setup Memorizing the Channels ........................................................55 Fine Tuning Channel Reception ...............................................56 Storing Channels Manually ......................................................57 Using the LNA(Low-Noise-Amplifier) Feature ..........................58 Memorizing the Channels Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system). MENU Press Menu button. Menu items appear on the screen. CHANNEL AIR A I R / C AT V AUTO PROGRAM FINE TUNE CHANNEL STORE OFF CHANNEL SETUP LNA Press Up and Down buttons to move to “CHANNEL” icon. Press Left and Right buttons to select “CHANNEL”. AIR/CATV is highlighted. Repeatedly press the Left/Right buttons to cycle through these choices : STD HRC IRC AIR SELECT MOVE CHANNEL Press Left and Right buttons to select “AUTO PROGRAM”. AUTO PROGRAM menu appears. Press Left and Right buttons to select “YES”, then store the selected channels. AIR A I R / C AT V AUTO PROGRAM FINE TUNE CHANNEL STORE LNA SELECT OFF MOVE AUTO Press Up and Down buttons to move to “AUTO PROGRAM”. MENU MENU PROGRAM YES NO SELECT MOVE MENU - STD, HRC and IRC identify various types of cable TV systems. contact your local cable company to identify the of cable system that exists in your particular area. - The PDP automatically cycles through all available channels and stores them in memory. - If you press the MENU button in the middle of AUTO STORE, the first stored channel will be displayed, and the AUTO STORE stops. 55 HYUNDAI Plasma Display Fine Tuning Channel Reception If the reception is clear, you do not have to fine tune channels, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. MENU Press Menu button. Menu items appear on the screen. CHANNEL CHANNEL LNA Press Up and Down buttons to move to “CHANNEL” icon. Press Left and Right buttons to select “CHANNEL”. AIR A I R / C AT V AUTO PROGRAM FINE TUNE SELECT STORE OFF MOVE MENU CHANNEL AIR A I R / C AT V AUTO PROGRAM FINE TUNE CHANNEL STORE LNA Press Up and Down buttons to move to “Fine Tune”. Press Left and Right buttons to select “Fine Tune”. New Menu items appears. Press Left and Right buttons to adjust Screen. *Channel number is current channel. EXIT SELECT MOVE FINE MENU TUNE C HANNEL SELECT MOVE 20 CHANNEL SETUP OFF +00 MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. OSD for the fine tuned channels is highlighted in blue. On INFORMATION active, MFT (Manual Fine Tune) after the channel number will be displayed. 56 Storing Channels Manually You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. MENU Press Menu button. Menu items appear on the screen. CHANNEL CHANNEL LNA Press Up and Down buttons to move to “CHANNEL” icon. Press Left and Right buttons to select “CHANNEL”. AIR A I R / C AT V AUTO PROGRAM FINE TUNE STORE OFF SELECT MOVE MENU CHANNEL A I R / C AT V AUTO PROGRAM AIR CHANNEL SETUP FINE TUNE CHANNEL STORE LNA Press Up and Down buttons to move to “CHANNEL STORE”. Press Left and Right buttons to select “CHANNEL STORE”. Channel Store menu appears. *The displayed channel number indicates a current channel. Press Left and Right buttons to select Channel Number. Press Up and Down buttons to move to “ADD/DELETE”. Press Left and Right buttons, then select ADD or ERASE. MENU 57 SELECT MOVE CHANNEL SELECT MENU STORE 18 ERASE CHANNEL ADD/DELETE MOVE CHANNEL MENU STORE 18 ERASE CHANNEL ADD/DELETE SELECT OFF MOVE Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. MENU HYUNDAI Plasma Display Using the LNA(Low-Noise-Amplifier) Feature If the reception is clear, you don’t have to use this feature. If the signal is weak or distorted, try the followings. MENU Press Menu button. Menu items appear on the screen. CHANNEL A I R / C AT V AUTO PROGRAM FINE TUNE CHANNEL LNA Press Up and Down buttons to move to “CHANNEL” icon. Press Left and Right buttons to select “CHANNEL”. SELECT AIR STORE OFF MOVE MENU CHANNEL A I R / C AT V AUTO PROGRAM AIR FINE TUNE CHANNEL STORE ON LNA Press Up and Down buttons to move to “LNA”. Press Left and Right buttons to ON/OFF. MOVE MENU CHANNEL SETUP EXIT SELECT Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. 58 59 CHANNEL SETUP H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Function Setup How to Select the Aspect Ratio ...............................................61 Displaying Information .............................................................63 How to Set Key-Lock ...............................................................64 Using the Pixel Shift / Full White / Wiper Function ..................65 How to Freeze Picture .............................................................66 How to Set DPMS .....................................................................67 Choosing the Your Languages .................................................68 How to Set Image Adjust in PC Mode ......................................69 Viewing Closed Captions .........................................................71 Using the V-Chip ......................................................................73 How to Select the Aspect Ratio Users can adjust Aspect Ratio as users want. MENU Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon. Press Left and Right buttons to select “FUNCTION”. FUNCTION A S P E C T R AT I O KEY LOCK PIXEL SHIFT WIDE OFF OFF FULL WHITE DPMS LANGUAGE IMAGE ADJUST CAPTION OFF OFF ENGLISH V- C H I P SELECT MOVE FUNCTION A S P E C T R AT I O KEY LOCK DPMS LANGUAGE IMAGE ADJUST FUNCTION SETUP WIDE OFF OFF OFF PIXEL SHIFT FULL WHITE OFF ENGLISH CAPTION V- C H I P Press Up and Down buttons to move to “ASPECT RATIO”. Press Left and Right buttons to select “ASPECT RATIO”. Press Left and Right buttons, then the menu changes in order below. Wide Normal Panorama Zoom1 Zoom2 Zoom3 Auto Wide EXIT MENU SELECT MOVE MENU Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. ASPECT How To Directly Select Aspect Ratio : Press button. OSD menu displays the current aspect ratio. If you press the ASPECT button second time, aspect ratio will be changed according to Input mode as follows : - Under DTV, DVD inputs : Users can select Wide - Under PC, DVI inputs : Users can select Wide - Under other inputs : Users can select Wide in order. 61 Zoom1 Normal Normal Zoom2 Zoom3 Auto Wide in order. Auto Wide in order. Panorama Zoom1 Zoom2 Zoom3 Auto Wide HYUNDAI Plasma Display WIDE / AUTO WIDE General broadcast picture is adjusted to 16:9. NORMAL General picture size. PANORAMA Picture size for panorama video. ZOOM1 Zoom in 16:9 in vertical direction. FUNCTION SETUP ZOOM2 The picture enlarged to 16:9 format. This mode is recommended in letter box format. ZOOM3 This Mode is used to display 4:3. The picture using the full surface of the screen leaving the Sub-title visible. SubTitle 62
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 33 Language : EN-US Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:014f39d0-2877-4a69-8b29-244d9bf0009b Producer : Acrobat Distiller 6.0 (Windows) Company : 현대 원스탑 인증센터 Source Modified : D:20040715140344 Headline : Create Date : 2004:07:16 08:29:41+09:00 Creator Tool : Word용 Acrobat PDFMaker 6.0 Modify Date : 2004:07:16 09:36:06+09:00 Metadata Date : 2004:07:16 09:36:06+09:00 Document ID : uuid:ccfc29cf-dda0-4f87-82e6-2b4233cd3ce7 Version ID : 2 Format : application/pdf Title : 1 Creator : 이 상 준 Subject : Tagged PDF : No Author : 이 상 준EXIF Metadata provided by EXIF.tools