Hyundai IBT HQP50AH000 50” PDP Monitor User Manual 1

Hyundai IBT Corp. 50” PDP Monitor 1

Contents

Users Manual 3 of 3

FCC ID : PJIHQP50AH000 REPORT NO. : HCT-F04-0709 HYUNDAI C–TECH ATTACHMENT E -3. - USER’S MANUAL -
63FUNCTION SETUPDisplaying InformationYou can view the channel information and setting status by pressing the “INFO” button on the remote control.In case of applying TV input Press INFO button. In case of applying VIDEO input Press INFO button. In case of applying PC input Press INFO button. If the EXIT button is pressed, the menu disappears.INFOINFOINFOAIR - 02012 : 30 AMPICTURE MODE : STANDARDSOUND MODE : USERMTS MODE : MONOINPUT SIGNAL : MONOVIDEO - NTSC12 : 30 AMPC - 1024x768 70Hz12 : 30 AMEXIT
How to Set Key-LockThis is to lock the control buttons on the front bottom of PDP.64FUNCTION SETUPHYUNDAI Plasma DisplayMENU1234Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon.Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “KEY LOCk”. Press Left and Right buttons to ON/OFF. Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXITbutton is pressed, the menu disappears. FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEONOFFOFFOFFENGLISHMOVESELECT MENUWhen the AC power supply is cut off, key-lock function is automatically off.EXIT
65FUNCTION SETUP3MENU44EXITPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon.Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “PIXEL SHIFT” or “FULL WHITE”. Press Left and Right buttons to “ON/OFF”. Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.While FULL WHITE is activated, if you wish to switch the mode to Off or wish to use other function,press any of buttons on the remote control unit or any of control keys on the PDP unit. Then themenu screen will appear again. Press the left or right button to deactivate the current mode.WIPERUsing the Pixel Shift / Full White / Wiper FunctionThis feature is designed to reduce image sticking effects during displaying a static picture.(Brightness degradation is caused by the scale effects of a panel, which is characteristic of a PDP.)How To Directly Select Wiper : Press button. The image sticking (brightness degradation) is eliminated as white bars are moving in the right direction. It may take from several minutes up to several hours to remove the image sticking. If a fixed pattern is displayed for along time, you can prevent the latent image by switching FULL WHITE to On for 2 or 3 minutes on a hourly basis.The image sticking effect is influenced by the brightness of a fixed pattern and its display time. It is recommended thatyou reduce the level of the brightness by using picture controls (See page 36) when a fixed pattern is displayed for along time.12FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENU
How to Freeze PictureThe user can temporarily stop the playing picture. 66FUNCTION SETUPHYUNDAI Plasma DisplayPress Still button. Playing picture is stopped. - Under multi-screen mode(PIP, TWIN), the main picture stops. To deselect Still function. Press Still button once more. STILL
How to Set DPMSWhen in PC mode, you can activate Power Saving mode.67FUNCTION SETUP123DPMS feature is available for PC mode only.MENU4EXITPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon.Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “DPMS”. Press Left and Right buttons to “ON/OFF”. Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFONENGLISHMOVESELECT MENU
Choosing the Your LanguagesWhen you start using your TV for the first time, you must select your language preference in order to display mainmenus and sub menues, etc.68FUNCTION SETUPHYUNDAI Plasma Display123MENU4EXITPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon.Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “LANGUGE”. Press Left and Right button, then the menu changes in order below.English French German Spanish Italian Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENU
How to Set Image Adjust in PC Mode 69FUNCTION SETUP123MENU456EXITPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon.Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “IMAGE ADJUST”. Press Left and Right buttons to select“IMAGE ADJUST”. Image adjust menu appears. Press Up and Down buttons to chosse Item. Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.HORIZONTAL POSITION : To adjust the horizontal position of the picture. VERTICAL POSITION : To adjust the vertical position of the picture. FREQUENCY : To adjust to reduce the noise on the picture. PHASE : To adjust to eliminate the shake of the picture. Auto ADJUST : Horizontal/vertical positions are automatically adjusted. FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUIMAGE ADJUSTH POSITIONV POSITIONFREQUENCYPHASEAUTO ADJUSTMOVESELECT MENU+000+000+000+000
HYUNDAI Plasma DisplayFUNCTION SETUP- This function is provided in only PC mode. - When executing PC AUTO, optimum picture can be obtained if the setting is made under the full pattern. - You can store up to six modes by activating PC AUTO function.If you exceed six modes, the first stored mode information will be removed and a newly stored mode will bestored.70How To Directly Select Auto Track : Press button. Automatically adjust Horizontal/Vertical position of the picture. PC AUTO
71FUNCTION SETUPViewing Closed CaptionsYour TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions areusually subtitles for the hearing impaired or foreignlanguage translations. All VCRs record the closed caption signalfrom television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercialvideo tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and onthe tape’s packaging :* The Caption feature does not work with DVD or DTV signals.123MENU456Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon. Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “CAPTION”. Press Left and Right buttons to select“CAPTION”. Caption menu appears.Caption is highlighted.Press Left and Right buttons to “ON/OFF”. Press the Down button and then go to step 6if you need to set the Mode. Press Left and Right buttons to select “TEXT or CAPTION”. Press the Down button and then go to step 7if you need to depending on the particular broadcast, it might benecessary to make changes to "Channels" and "Field" Continued on next page ......FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUCAPTIONCAPTIONMODECHANNELFIELDONCAPTIONCHANNEL1FIELD1MOVESELECT MENUCAPTIONCAPTIONMODECHANNELFIELDONTEXTCHANNEL1FIELD1MOVESELECT MENUCC
72FUNCTION SETUPHYUNDAI Plasma Display...... Continued from previous page.7EXITPress the UP/DOWN/LEFT/RIGHT button to make the changes. Follow the same procedure as in steps 6 above.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.CAPTIONCAPTIONMODECHANNELFIELDONTEXTCHANNEL2FIELD1MOVESELECT MENUCAPTIONCAPTIONMODECHANNELFIELDONTEXTCHANNEL2FIELD2MOVESELECT MENUDifferent channels and fields display information. Field 2 carries additional information that supplements the information in Field 1.(For example, channel 1 may have subtitles in English, while channel 2 has subtitles in spanish.)8
Using the V-ChipThe V-Chip feature automatically locks out programs that are deemed inapproprite for children.The user must enter a PIN(Personal ID Number) before any of the V-chip restrictions are set up or changed.*When the V-Chip feature is activated, the PIP features do not function.73FUNCTION SETUP123MENU45678Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon.Press Left and Right buttons to select “FUNCTION”.Press Up and Down buttons to move to “V-CHIP”. Press Left and Right buttons to select“V-CHIP”. The message “Enter PIN” will appear. Enter you 4-digit PIN number.The defualt PIN number of a new TV set is “0-0-0-0”.The "V-Chip" Screen will appear.Press Up and Down buttons to move to “CHANGE PIN”, Press Left and Right buttons to select“CHANGE PIN”. The change PIN screen will appear.Chooose any 4-digits for your PIN and enter them.As soon as the 4-digits are entered, the "Confirm New PIN" screen appears.Continued on next page ......FUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUFUNCTIONASPECT RATIOKEY LOCKPIXEL SHIFTFULL WHITEDPMSLANGUAGEIMAGE ADJUSTCAPTIONV-CHIPWIDEOFFOFFOFFOFFENGLISHMOVESELECT MENUENTER PIN ENTER PIN : - - - -MOVESELECT MENUFUNCTIONV-CHIPTV GUIDEMAPPCHANGE PINOFFMOVESELECT MENUCHANGE PIN CHANGE PIN : - - - -MOVESELECT MENU
74FUNCTION SETUPHYUNDAI Plasma Display...... Continued from previous page.CONFIRM PIN CONFIRM PIN : - - - -MOVESELECT MENU9If you foget the PIN, Press the remote-control buttons in the following sequence,which resets the PIN to "0-0-0-0". MENU + MTS + SLEEP + INFO (On the Remote Control)This message should be printed on a separate page of paper or on a page of the manual that can be removedby a parent and put in a safe place where the children cannot find this message!!10111213Re-enter the same 4 digits. When the confirm screen disappears, your PIN has been memoriged.V-CHIP is highlighted.Go to step 10, if you need to set restrictions using the “TV Guideline”.Parental Restrictions can be set up using either of two methods : The TV guidelines or the MPAA rasting.Press Left and Right buttons to “ON/OFF”. Press Up and Down buttons to move to “TV GUIDE”. Press Left and Right buttons to select “TV GUIDE”. TV Guide menu appears . Press the Up and Down button to select one of the six age-based categories.TV-Y : Young children TV-PG : Parental guidanceTV-Y7 : Children 7 and over TV-14 : Viewers 14 and overTV-G : General audience TV-MA : Mature audienceContinued on next page ......FUNCTIONV-CHIPTV GUIDEMAPPCHANGE PINONMOVESELECT MENUTV GUIDE ALL FV V S L D TV-Y U TV-Y7 U U TV-G  U TV-PG U U U U U TV-14 U U U U U TV-MA U U U UB : BLOCK U : UNBLOCKMOVESELECT MENU
75FUNCTION SETUP...... Continued from previous page.141516At this point, one of the TV-Guidelines is selected. Press the right button : Depending on your exiting setup, a letter "U" or "B" will start blinking.(U=Unblocke, B=Blocked)Whlie the "U" or "B" is blinking, press the Up and Down button to block or Unblock the category.Press the Right button to save the TV-Guidelines. A TV-Rating will selected, and no letters will blink.To select a differnt TV-Rating, press the Up and Down button and them repeat the process.Note 1 : The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings:FV : Fantasy violence L : Adult Language V : ViolenceD : Sexually Sugessive Dialog S : Sexual situationNote 2 : The V-Chip will automatically block certain categories that are “more restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked.Similarly, if you block the TV-G category, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.)Go to step 16, if you need to set FV, D, L, S and V sub-ratings.First, select one of these TV-Ratings : TV-Y7, TV-PG, TV-14 or TV-MA (See Step ~, on previous page).Next, while the TV-Rating is selected, repeatedly press the RIGHT button.This will cycle through the available sub-ratings (FV,L, S, D or V).A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” isblinking, press the UP or DOWN button to change the sub-rating.Press the RIGHT button to save the TV guidelines. A TV-Rating will be selected and noletters will select. To select a different TV-Rating, press the UP or DOWN button and thenrepeat the process.Note : The V-chip will automatically block certain categories that are “More restrictive”.For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14and TV-MA will automatically be blocked.1718
HYUNDAI Plasma DisplayHow to Set Clock ........................................................................77How to Set On Time ....................................................................78How to Set Off Time ....................................................................80How to Set Sleep Time ...............................................................82Clock SetupHYUNDAI PLASMA DISPLAY
77CLOCK SETUPHow to Set ClockYou can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock ifyou wish to use the automatic on or off timers.Ex) To set to 6:30 PM,123MENU4567TIMECLOCKON TIMEOFF TIMESLEEPOFFAM AMOFFMOVESELECT MENUTIMECLOCKON TIMEOFF TIMESLEEPOFFAM PMOFFMOVESELECT MENU8Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “TIME” icon.Press Left and Right buttons to select “TIME”.Press Up and Down buttons to move to “CLOCK”. Press Left and Right buttons to select“CLOCK”. Press the button a second time to move to "HOUR".Press Up and Down buttons to set to “6”. Press Left and Right buttons to move to “MINUTE” unit.Press Up and Down buttons to set to “30”. Press Left and Right buttons to move to “AM/PM”.Press Up and Down buttons to set to “PM”. 9TIMECLOCKON TIMEOFF TIMESLEEP 6 OFFAM AMOFFMOVESELECT MENUTIMECLOCKON TIMEOFF TIMESLEEP6 30OFFAM AMOFFMOVESELECT MENUTIMECLOCKON TIMEOFF TIMESLEEP6 30OFFPM PMOFFMOVESELECT MENU
78CLOCK SETUPHYUNDAI Plasma DisplayPress the Right button and then go to step 10 if you need to set on time.How to Set On TimeThis function allows you to automatically turn on your PDP at the preset time.Ex) To set to 7:20 AM,1110121314151617Press Up and Down buttons to move to “ON TIME”. Press Left and Right buttons to select “ON TIME”.On Time menu appears.Press Left and Right buttons to select “TIME” to move to “HOUR”.Press Up and Down buttons to set to “7”. Press Left and Right buttons to move to “MINUTE” unit.Press Up and Down buttons to set to “20”. Press Left and Right buttons to move to “AM/PM”.Press Up and Down buttons to set to “AM”. Continued on next page ......TIMECLOCKON TIMEOFF TIMESLEEP6 30OFFPM PMOFFMOVESELECT MENUON TIMETIMECHANNELVOLUMEMOVESELECT MENUOFF010 AM27ON TIMETIMECHANNELVOLUMEMOVESELECT MENUOFF010 AM27 20ON TIMETIMECHANNELVOLUMEMOVESELECT MENUOFF010 AM207 20When the power supply(AC main power) is cut off, the clock is reset to the value before the Time set.
...... Continued from previous page. (Set the volume level and channel at the time when your PDP turns on.)19182021222379CLOCK SETUPRegardless of which Input Mode you set On Time in, your PDP will turn on in TV Mode only.Press Left and Right button to move to “ON/OFF”.Press Up and Down buttons to set to “ON”. Press the Right button and then go to step 20 if you need to set the Channel/Volume. Press Up and Down buttons to move to “CHANNEL”. Press Left and Right buttons to set to“Channel”.Press Up and Down buttons to move to “VOLUME”.Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.EXITON TIMETIMECHANNELVOLUMEMOVESELECT MENUON010 AM27 20ON TIMETIMECHANNELVOLUMEMOVESELECT MENUON010 AM27 20ON TIMETIMECHANNELVOLUMEMOVESELECT MENUON010 AM157 20ON TIMETIMECHANNELVOLUMEMOVESELECT MENUON025 AM157 20
How to Set Off TimeThis function allows you to automatically turn off your PDP at the preset time.Ex) To set to 11:30 PM,80CLOCK SETUPHYUNDAI Plasma DisplayMENU12345TIMECLOCKON TIMEOFF TIMESLEEPOFFPM AMOFFMOVESELECT MENU6 30TIMECLOCKON TIMEOFF TIMESLEEPOFFPM AMOFFMOVESELECT MENU6 3011 306789Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “TIME” icon. Press Left and Right buttons to select “TIME”.Press Up and Down buttons to move to “OFF TIME”. Press Left and Right buttons to select“OFF TIME” to move to “HOUR” unit.Press Up and Down buttons to set to “11”. Press Left and Right buttons to move to “MINUTE” unit.Press Up and Down buttons to set to “30”. Press Left and Right buttons to move to “AM/PM”.Press Up and Down buttons to set to “PM”. Continued on next page ......TIMECLOCKON TIMEOFF TIMESLEEPOFFPM AMOFFMOVESELECT MENU6 30TIMECLOCKON TIMEOFF TIMESLEEPOFFPM AMOFFMOVESELECT MENU6 3011 TIMECLOCKON TIMEOFF TIMESLEEPOFFPM PMOFFMOVESELECT MENU6 3011 30
81CLOCK SETUP1011...... Continued from previous page.Press Left and Right button to move to “ON/OFF”.Press Up and Down buttons to set to “ON”. Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.TIMECLOCKON TIMEOFF TIMESLEEPONPM PMOFFMOVESELECT MENU6 3011 30EXIT
How to Set Sleep TimeThis function allows you to automatically turn off your PDP after a designated amount of time.How To Directly Start Sleep : Press button. Press sleep button, then the setting changes in order below. (Unit : Minute)OFF 30 60 90 120 240 82CLOCK SETUPHYUNDAI Plasma Display123MENU4Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “TIME” icon.Press Left and Right buttons to select “TIME”.Press Up and Down buttons to move to “SLEEP”. Press Left and Right buttons, then the menuchanges in order below. (Unit : Minute)OFF 30 60 90 120 240 Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.TIMECLOCKON TIMEOFF TIMESLEEPPM AMOFFMOVESELECT MENU6 3011 30 ONTIMECLOCKON TIMEOFF TIMESLEEPPM AMOFFMOVESELECT MENU6 3011 30 ONTIMECLOCKON TIMEOFF TIMESLEEPPM AM30MOVESELECT MENU6 3011 30 ONEXITSLEEPOne minute before the preset Sleep Time, “Power off in a minute” message will appear.
83CLOCK SETUP
HYUNDAI Plasma Display Glossary .................................................................................. 85Troubleshooting ...................................................................... 87Cleaning and Caring .............................................................. 89Product Specifications ............................................................ 90AppendixHYUNDAI PLASMA DISPLAY
85APPENDIXGlossaryComponent video Component video is sent through three cables: two color shade (chrominance) signalsand one brightness (luminance) signal. Component video achieves greater coloraccuracy than composite video or S-VIDEO by splitting chrominance into two separateportions.Composite video Composite video is sent through a single cable. Composite video combines the colorshade (chrominance) and brightness (luminance) information into one video signal.S-VIDEO S VIDEO requires a single cable, which carries the brightness (luminance) and color(chrominance) signals of the picture separately. S-VIDEO provides better resolutionthan composite video, which carries the signals together.Full Scart SCART connectors used with many European video equipments is designed to carrycomposite video and RGB video signals. If the equipment which outputs pictureoutputs RGB-signal, it will putput RGB signal from the RGB pins and a completecomposite video signal at the same time. Half Scart Basically is the same as Full Scart in function but does not support RGB Video signals.480i Provides 480 lines of resolution. Displays images using interlaced scanning, which firsttransmits all the odd lines on the TV screen and then the even lines.480p Provides 480 lines of resolution. Displays images using progressive scanning, whichtransmits each line from top to bottom.720p Provides 720 lines of resolution. Displays images using progressive scanning, whichtransmits each line from top to bottom. 1080i Provides 1080 lines of resolution. Displays images using interlaced scanning, whichfirst transmits all the odd lines on the TV screen and then the even lines. 1080i is oneof the formats used by HDTV (High Definition TV).Digital television (DTV) A new technology for transmitting and receiving broadcast television signals. DTVprovides higher resolution and improved sound quality over analog television.HDTV(High Definition TV) HDTV is a new kind of digital TV, creating a high quality picture, high definition. TheHDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 480p orhigher.SDTV(Standard Definition TV) SDTV is a new kind of standard definition digital TV, having a range of lower resolutionthan the HDTV. Supports 480i.Satellite Broadcasting Provides crisp picture and clear audio quality throughout the country via a satellite. Cable Broadcast Receiver A device that receives cable broadcasting. Connecting it to your TV set allows you towatch a various channels. (Converter)
86APPENDIXHYUNDAI Plasma Display VHF/UHF VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300to 3,000 megahertz.DVD DVD (digital versatile disc) is an optical disc that can store a huge volume ofmultimedia such as video, game, and audio application, etc.DVI DVI (Digital Visual Interface) is a specification for digital signasl. This interface usingTMDS transmission reduces the loss of signal, allowing to enjoy a clear and crispimage. There are DVI-D connection, designed for digital signals, and DVI-I connection,designed for both analog and digital signals. Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TVantenna.LNA (Low-Noise-Amplifier) Satellite applied technology. It is capable of amplifying weak signals so that any areaexperiencing a signal interruption may enjoy a clearer picture quality.Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9(widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.PIP (Simultaneous Screen) PIP allows you to view two images at the same time in a single screen.SWAP PIP function provides a main picture (larger image) and sub-picture (smaller image).The SWAP is designed to swap the sub-picture for the main picture. For example,while you are watching a main picture on TV and watching a sub-picture on VCR, youcan instantly switch the two pictures by using the SWAP function.Picture Mode Picture Mode features the optimal picture quality. There are Standard-Dynamic-Movie-Mild-User features in order. “User Control” allows you to adjust Contrast, Brightness,Sharpness, Color and Tint.Sound Mode Sound Mode features the optimal sound quality. There are Standard-Music-Movie-News-User features in order. “User Control” allows you to adjust high frequencysound, middle frequency sound and low frequency sound. Channel Tuning The feature allows you to enjoy optimal broadcasting. This product provides automatictuning feature for the best broadcasting status. You can tune the channels manually. SRS WOW A well-recognized 3D sound technology developed by US SRS Labs, Inc. Thistechnology delivers the ultimate audio experience only with two speakers as if throughmulti-channel speakers.Subwoofer Output Designed to improve ultra low frequency with about 150Hz. Installation of a sub wooferwith a built-in amplifier is necessary.
87APPENDIXTroubleshooting Installation ProblemsPicture ProblemsSymptomHow can I install anantenna? TV screen is not clear afterinstalling an indoorsantenna.How can I view cablebroadcasting?SymptomNeither picture nor sound comes up. Picture turns on slowly after power is on.Vertical and horizontal linesand web patterns brieflyappear on the picture and shake.Input Source informationonly appears on blackscreen.Poor reception on somechannels. Black and white on somechannels.TV won’t turn on.Screen is too bright or toodark.Possible solutionRefer to pages 23~24.Indoors antenna may experience poor reception due to surrounding buildings. Pleaseinstall an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter).Possible solutionCheck whether power is on.Check whether the power is cut or whether power cord is properly connected.Try to plug another product’s power cord to the outlet the PDP is plugged into.This symptom is not a malfunction. This delay is designed to prevent the distorted andnoisy picture when power is on. However, if the picture does not appear more than 5minutes after power is on, call a service center. This symptom may be caused by interference from other electric appliances. Pleaseavoid using a cordless phone, hairdryer, and electric drill, etc. Check whether your TV is properly connected to external devices.Check whether you selected proper channels. Try re-orienting your antenna. EnsureLNA is activated.Check other channels for black and white screen. Adjust colour.Ensure the power cord is plugged.Adjust brightness.
HYUNDAI Plasma Display 88APPENDIXSound ProblemsGeneralAuto On does not work.After setting the time, I turned TV off and turn it on.The programmed informationhas been erased.SymptomToo much noise occurs.No sound while viewing acable channelPicture is OK but sound doesnot come out. One of the speakers does notproduce sound.SymptomRemote control won't work.Where does the S-Videocable plug in for audiooutput?Strange noises are heard.I tried to use the TV screenas a PC monitor but it doesn’t work. Ensure to use the remote control or power button on the product to turn off your TV. Ifyou unplug the power cord, the stand-by consumption power becomes 0 (zero), whichcauses the programmed time to be erased.Ensure to use the remote control or power button on the product to turn off your TV. Ifyou unplug the power cord, the stand-by consumption power becomes 0 (zero), whichcauses the programmed time to be erased.Possible solutionCheck whether the audio setting is in the Stereo mode. In the Stereo mode, the soundmay be distorted in the area where experiences poor reception or is located far awayfrom a TV broadcasting station. Make sure an audio or audio/video component is securely inserted into the appropriatejacks. Check other channels for sound. Check the volume settings on the cablebroadcasting receiver. Try to press volume up/volume down buttons of your remote control.Select sound balance and make proper adjustment. (Page 48)Check the speaker connection cables. Possible solutionCheck whether there is a blocking object between the remote control and PDP.Make sure your LCD TV is Power On. (In case of normal, LED on the front panel is inRed.)Check whether batteries are inserted with proper polarities(+, -).When the batteries are worn out, replace with new ones.Connect the two Audio jacks from the S-Video cable to the left and right ports on theComposite.Ticking noise during or after watching is caused by the change of ambientenvironment such as humidity and temperature, which is characterized by plasticproducts. Strange ticking noise occurs because a signal is suddenly transmitted to thePDP panel. So, this is not a malfunction.Adjust the resolution referring to the standard signal mode table. Check thespecification of your video card installed in your PC. If your video card does not work insupported hardware. Try upgrading the video card’s driver.
89APPENDIXCare and CleaningCabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glassdetergent and dry with a soft cloth.Never use any solvent on the screen such as Acetone, Benzene, orThinner, etc.Cleaning Inside When the inside needs to be cleaned, contact a service center ordistribution agent where the item is purchased. It is recommended cleaning is complete before the rainy season.
HYUNDAI Plasma Display 90APPENDIXProduct SpecificationsDisplay (PDP TV)Speaker (Optional)PixelWidthHeight (Excluding stand)Height (Including stand)DepthWeight (With Package)Weight (Net Product) Power ColorsUse TemperatureUse HumidityTVHQP421SR HQP421HR HQP501HRMODELDimensions(WxDxH)WeightTypeCabinetImpedanceAllowable InputFrequency ResponseOutput Sound Pressure MODEL PD421S P501S1024(H) x 768(V)100 - 240V AC 50/60Hz16,770,000 colors(256 colors for each R, G, B ) 00~400CBelow 80% 2-Tuner Bulit In1030 mm631 mm717 mm79 mm32 kg26 kg1024(H) x 768(V)1208 mm724 mm809.5 mm79 mm54 kg43 kg852(H) x 480(V)120 x 79 x 631 mm2 kg x 22 way 6 speaker systemBase Reflex Type8Rated 8W (RMS)Max. 10W(Music Peak Power)120Hz ~ 20,000Hz (-10dB)87dB/W/m120 x 79 x 724 mm1.5 kg x 2
91APPENDIX
HyundaiPlasma DisplayHQP421SR/421HR/501HRUser’s Guidewww.hyundaiQ.comP/N 632 0238 202 Rev.00Service CenterUSAHyundai ImageQuest America(C/O : I Display)5690 Steward Ave. Fremont, CA 94538, USATel : 510-683-0970Fax : 510-683-0970GERMANYHyundai ImageQuest Europe GmbHHajo-Rüter Str. 19, 65239 HochheimTel : 06146 / 904 444Fax : 06146 / 904 410e-mail : service@hyundaiq.deWWW : www.hyundaiq.comAUSTRALIAThomas Electronics Australia Pty Ltd.3 Sheridan CloseMilperra NSW 2214, AustraliaTel : +61 2 9773 7400Fax : 61 2 9773 7177Attn : Ms. Shiely PonimanJAPANHyundai ImageQuest JAPANShin-Hibiya Bldg, East 5F 1-3-6 Uchisaiwai-Cho, Chiyoda-ku, Tokyo, Japan 100-0011Tel : 03-5157-2286Fax : 03-5157-2284e-mail : pjkim@iqt.co.krC/S P.J.Kim* The above image may look different from the real product.

Navigation menu