ICOM orporated 325400 VHF Transceiver User Manual 2
ICOM Incorporated VHF Transceiver 2
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1203027 |
| Application ID | nGHDu7Ln7sxJiwVXVCYoyA== |
| Document Description | User Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 134.81kB (1685173 bits) |
| Date Submitted | 2009-11-20 00:00:00 |
| Date Available | 2009-11-20 00:00:00 |
| Creation Date | 2009-10-13 10:22:42 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2009-11-18 09:55:38 |
| Document Title | User Manual 2 |
| Document Creator | Adobe InDesign CS2_J (4.0.5) |
SCAN OPERATION ■ Priority watch A priority watch checks for signals on “priority channels” while operating on a VFO frequency. D Memory or Call channel watch While operating on a VFO frequency, the memory or Call channel watch checks for signals on the selected channel every 5 sec. q Select a desired memory channel or the Call channel. w Push [FUNC](M), and then [PRIO](7) to start the watch. • The decimal point “.”, on the frequency readout blinks. • When a signal is detected on the channel, the watch resumes according to the scan resume setting. (p. 30) VFO frequency Memory channel D Memory scan watch While operating on a VFO frequency, a memory scan watch checks for signals on each memory channel in sequence, every 5 sec. q Push [VFO/MR/CALL] several times to select the memory mode. w Push [FUNC](M), and then [SCAN](5) to start a memory scan. e Push [FUNC](M), and then [PRIO](7) to start the watch. • The VFO mode is selected, and the decimal point “.”, on the frequency readout blinks. • When a signal is detected on a channel, the watch resumes according to the scan resume setting. (p. 30) Memory scan VFO frequency 5 sec. e To cancel the watch, push any key except [ [MONI], [FUNC](M), or [PTT]. Mch 0 Mch 1 ], []/[], 5 sec. Mch 199 r To cancel the watch, push any key except [ [MONI], [FUNC](M), or [PTT]. 31 SKIP Mch 2 ], []/[], TONE SQUELCH AND POCKET BEEP ■ Tone/DTCS squelch and pocket beep D Tone squelch and DTCS squelch D Setting CTCSS tone or DTCS code The tone squelch (CTCSS) or DTCS squelch opens only when receiving a signal that includes a matched CTCSS tone or DTCS code, respectively. You can silently wait for calls using the same tone or code. Separate tone frequencies can be set for repeater and tone squelch/pocket beep operation. q Push [FUNC](M), and then [SET](8) to enter the Set mode. w Push [] or [] to select the CTCSS tone item (Ct) or the DTCS code item (dt). e Rotate [VOL] to select a desired CTCSS tone or DTCS code. D Pocket beep The pocket beep function uses subaudible tones or DTCS codes for calling, and can be used as a “common pager” to inform you that someone has called while you were away from the transceiver. • Recommended CTCSS tones 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 (unit: Hz) 131.8 136.5 141.3 146.2 151.4 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 051 054 065 071 072 073 074 114 115 116 125 131 132 134 143 152 155 156 162 165 172 174 205 223 226 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 445 464 465 466 503 506 516 532 546 565 606 612 624 627 • The recommended CTCSS tone or DTCS code are shown to the left. r Push [# ENT] to exit the Set mode. [VOL] CTCSS tone setting 225.7 233.6 241.8 250.3 DTCS code setting • Recommended DTCS code 023 025 026 031 032 043 047 • “ ” blinks when selecting the CTCSS tone item, and “ D ” blinks when selecting the DTCS code item. 631 632 654 662 664 703 712 723 731 732 734 743 754 10 11 12 13 14 15 16 17 18 19 32 8 TONE SQUELCH AND POCKET BEEP D Setting DTCS polarity D Operation For DTCS operation, the polarity setting is also configurable, as well as the code setting. If the polarity is different, the DTCS squelch never opens, even when receiving a signal that includes a matched DTCS code. q Set a desired operating frequency, and then a CTCSS tone or a DTCS code. w Push [FUNC](M), and then [TONE](1). q Push [FUNC](M), and then [SET](8) to enter the Set mode. w Push [] or [] to select the DTCS polarity item (dtP). e Rotate [VOL] to select a desired polarity setting between “dtP.nn” (normal), “dtP.nR” (TX: normal, RX: reverse), “dtP.Rn” (TX: reverse, RX: normal) and “dtP.RR” (reverse). TX/RX: Normal polarity TX: Normal, RX: Reverse TX: Reverse, RX: Normal TX/RX: Reverse polarity r Push [# ENT] to exit the Set mode. • Repeat step w several times to activate a desired tone function. Push , and then to select the tone function in sequence. Repeater tone Function OFF Tone squelch with pocket beep DTCS squelch Tone squelch DTCS squelch with pocket beep e Operate the transceiver in a normal way. 33 TONE SQUELCH AND POCKET BEEP r W hen receiving a signal that includes a matched tone or code, the squelch opens and the signal can be heard. When the pocket beep function is activated. • Beep tones sound and “ ” blinks. To stop the beeps and blinking, push any key. • W hen the received signal’s tone/code does not match, the squelch does not open. However, the signal indicator shows the signal strength. • To open the squelch manually, push and hold [MONI]. t Push [PTT] to answer. ■ Tone scan By monitoring a signal from a repeater, pocket beep or squelch function operation, you can determine the subaudible tone required to access the repeater or open the squelch. q Set a frequency to be checked for a tone frequency or DTCS code. w Push [FUNC](M), and then [TONE](1). • Repeat step w several times to activate a desired tone function. • The tone scan can be made even if the tone function is not selected. e Push [FUNC](M), and then [T.SCAN](3) to start a tone scan. • To change the scan direction, push [] or []. r When a tone frequency or DTCS code is matched, the squelch opens and the tone frequency or code is temporarily programmed into the selected mode. • When a tone frequency or DTCS code is detected, the tone scan pauses according to the scan resume setting (p. 30) • The decoded CTCSS tone frequency or DTCS code is used according to the selected tone function type in step w. - No indication : Cannot be used for operation. -“ ” : CTCSS tone encoder (repeater tone) -“ ” : CTCSS tone encoder/decoder -“ D ” : DTCS tone encoder/decoder t To cancel the scan, push any key except [ [MONI] or [FUNC](M). ], []/[], 10 11 12 13 14 15 16 17 18 19 34 9 DTMF MEMORY ■ Programming a DTMF code sequence The DTMF codes are used for autopatching, accessing repeaters, controlling other equipment, and other operations. The transceiver has 16 DTMF memory channels (d0–d9, dA, db, dC, dd, dE, dF) for storage of often-used DTMF code sequence of up to 24 digits. q P ush [FUNC](M), and then [DTMF.M](0) to enter the DTMF memory mode. Push , and then ENT] inputs “# (F).” • If a digit is mistakenly input, push [PTT] momentarily, then repeat from step e. w Push [p] or [q] to select a desired DTMF memory channel. • If programmed, the previously programmed DTMF code is displayed. e Push [FUNC](M), and then push and hold [DTMF.M](0) for 1 sec. to enter the programming mode. • “_ _ _ _ _” appears. • Programmed memories will be cleared by this operation. Push , and then push and hold for 1 sec. 35 r Push keys to input a desired DTMF code sequence of up to 24 digits. • [ 0]–[9] inputs “0”–“9,” [MONI] inputs “A,” [p ] inputs “B,” [q ] inputs “C,” [VFO/MR/CALL] inputs “D,” [M] inputs “M (E)” and [# The next page appears when the 6th digit has been input. t Repeat step r until the desired code is input. y Push [PTT] to store the DTMF code sequence and exit the programming mode. • After the 24th digit is input, the transceiver automatically stores the code sequence and returns to step w. u Push [VFO/MR/CALL] to exit the DTMF memory. •P rogramming mode indication The programming mode consists of 5 pages. Page 1st 2nd 3rd 4th 5th Digits 1st to 5th 6th to 10th 11th to 15th 16th to 20th 21st to 24th Indication No indication. “ ” appears. “ ” appears. “ ” appears. “ ” blinks. DTMF MEMORY ■ Transmitting a DTMF code sequence The transceiver has 3 methods of transmitting a DTMF code sequence. Select a desired option in the Set mode. q Push [FUNC](M), and then [SET](8) to enter the Set mode. w Push [] or [] to select the DTMF TX key item (dmt). e Rotate [VOL] to select a desired option. • dmt.k : Transmits the appropriate DTMF code assigned to the pushed key. • dmt.m : T ransmits the programmed DTMF code sequence in the DTMF memory channel assigned to the pushed key. • dmt.t : N o DTMF code can be transmitted. However, while pushing and holding [PTT], pushing either the [] or [] transmits a 1750 Hz tone burst signal. r Push [# ENT] to exit the Set mode. D Using a DTMF memory channel First, set the DTMF TX key to “dmt.m” in the Set mode. ➥ While pushing and holding [PTT], push one of the keys to transmit the programmed DTMF code sequence in the DTMF memory. • Pushing [0] to [9], [MONI](A), [](B), [](C), [VFO/MR/CALL] (D), [M](E), or [# ENT](F) transmits a DTMF code channel (d0– d9, dA, dB, dC, dD, dE or dF) respectively. D 1750 Hz tone o access some European repeaters, the transceiver must transmit a 1750 Hz tone burst signal. • This tone can be used as a ‘Call signal’ in countries out of Europe. First, set the DTMF TX key to “dmt.t” in the Set mode. D Manual DTMF code transmission First, set the DTMF TX key to “dmt.k” in the Set mode. ➥ While pushing and holding [PTT], push the desired keys to transmit a DTMF code sequence manually. • Push [0]–[9] for “0”–“9,” [MONI] for “A,” [] for “B,” [] for “C,” [VFO/MR/CALL] for “D,” [M] for “M,” and [# ENT] for “#.” ➥ While pushing and holding [PTT], push and hold either the [] or [] for 1 or 2 sec. to transmit a 1750 Hz tone burst signal. • While pushing and holding the key, the tone is transmitted. 10 11 12 13 14 15 16 17 18 19 36 9 DTMF MEMORY ■ Confirming a DTMF memory ■ Setting DTMF transfer speed A DTMF memory can be confirmed with a DTMF tone. When slow DTMF transmission speeds are required with DTMF memory transmission (as for some repeaters), the transceiver’s rate of DTMF transmission can be adjusted in the Initial Set mode. q P ush [FUNC](M), and then [DTMF.M](0) to enter the DTMF memory mode. w Push [p] or [q] to select a desired DTMF memory channel. e Push [MONI] to confirm the DTMF memory contents. • The programmed DTMF code sequence sounds. • After sounding, the transceiver exits the DTMF memory mode. The programmed DTMF code sequence sounds. q While pushing and holding [] and [], turn the power ON to enter the Initial Set mode. w Push [] or [] to select the DTMF speed item. (dtd) e Rotate [VOL] to select a desired speed. • dtd. 1 : 100 msec. interval; 5.0 cps rate • dtd. 2 : 200 msec. interval; 2.5 cps rate • dtd. 3 : 300 msec. interval; 1.6 cps rate • dtd. 5 : 500 msec. interval; 1.0 cps rate (cps=characters per second) r Push [# ENT] to exit the Initial Set mode. Exits the DTMF memory mode. 37 SET MODES 10 ■ Set mode programming The Set mode is used to change the settings of the transceiver’s functions. • Repeater tone frequency (p. 39) • Tone squelch frequency (p. 39) D Set mode operation q Push [FUNC](M), and then [SET](8) to enter the Set mode. w Push [] or [] to select the desired item. e Rotate [VOL] to select the option or value. r To exit the Set mode, push [# ENT]. • DTCS code (p. 39) • DTCS polarity (p. 39) • Operating mode (p. 42) • Frequency offset (p. 40) • Reverse duplex functon (p. 40) : Push • DTMF TX key (p. 42) • Tuning step (p. 40) : Push *Appears for only the U.S.A. version transceivers. • VOX time-out timer (p. 42) • VOX delay (p. 41) • Microphone gain (p. 41) • Scan resume setting (p. 40) NOTE: When the display type setting (pp. 27, 46) is set to “CH” in the Initial Set mode, and accessing the Set mode from the memory mode, most of Set mode items do not appear. • VOX gain (p. 41) • Weather alert* (p. 41) • TX permission (p. 41) • Function key timer (p. 40) • LCD backlight (p. 41) 10 11 12 13 14 15 16 17 18 19 38 10 SET MODES ■ Set mode items D Repeater tone frequency D DTCS Code Selects one of 50 subaudible tone frequencies used to access the repeaters. Selects one of 104 DTCS (both encoder/decoder) codes. • 023–754 (default: 023) • 67.0–254.1 Hz (default: 88.5 Hz) • Available DTCS codes D Tone squelch frequency Selects one of tone frequencies for tone squelch or pocket beep operation. • 67.0–254.1 Hz (default: 88.5 Hz) • Usable subaudible tone frequencies 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 179.9 183.5 (unit: Hz) 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8 250.3 254.1 The transceiver has 50 tone frequencies and consequently their spacing is narrow compared with units having 38 tones. Therefore, some tone frequencies may receive interference from adjacent tone frequencies. 39 023 025 026 031 032 036 043 047 051 053 054 065 071 072 073 074 114 115 116 122 125 131 132 134 143 145 152 155 156 162 165 172 174 205 212 223 225 226 243 244 245 246 251 252 255 261 263 265 266 271 274 306 311 315 325 331 332 343 346 351 356 364 365 371 411 412 413 423 431 432 445 446 452 454 455 462 464 465 466 503 506 516 523 526 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754 D DTCS Polarity Selects the DTCS polarity between “dtP.nn” (normal), “dtP.nR” (TX: normal, RX: reverse), “dtP.Rn” (TX: reverse, RX: normal) and “dtP.RR” (reverse). (default: dtP.nn) The DTCS code’s polarity for transmitting or receiving can be independently set by this item. TX/RX: Normal polarity TX/RX: Reverse polarity SET MODES 10 D Frequency offset D Scan resume setting Selects the frequency offset between 0 and 20 MHz, for repeater operation. The frequency offset means the difference between the transmit and receive frequencies. (default: differs depending on the version) Selects the scan resume setting between SCt. 5, SCt. 10, SCt. 15, and SCP. 2. When a signal is received during a scan, the scan pauses and then resumes, according to the scan resume setting. • SCt. 5/10/15 : The scan pauses for 5, 10 or 15 sec., and then resumes. (default: SCt. 15) • SCP.2 : T he scan pauses until the received signal disappears, and then resumes after 2 sec. D Reverse duplex function Turns the reverse duplex function ON or OFF. (default: OFF) D Function key timer Push [FUNC](M) to enter the Function mode, and then push a keypad key to activate it’s second function. D Tuning step Selects the tuning step from 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz. (default: differs depending on the version) • During the Function mode, “ ” is displayed on the LCD. Set the time between when Function mode is entered, and how long it remains activated after you push the keypad key to activate it’s second function. • F0.At : E xits the Function mode immediately after a key is pushed to activate it’s second function. (default) • F1/2/3.At : The Function mode remains activated for the selected period after a key is pushed to activate it’s second function. • F .m : The Function mode remains activated until [FUNC](M) is pushed again, even after a key is pushed to activate it’s second function. 10 11 12 13 14 15 16 17 18 19 40 10 SET MODES D LCD backlight D VOX gain Selects the LCD backlight function. Sets the VOX gain to between 1 and 10. Higher values make the VOX function more sensitive to your voice. To turn the VOX function OFF, select “VOX.OF.” (default: VOX.05) • LIG.OF • LIG.ON • LIG.At : Turns the backlight function OFF. :L ights continuously while the transceiver is ON. : Turns ON when an operation occurs, and turns OFF after 5 sec. (default) NOTE: Set the microphone gain before setting the VOX gain. See page 52 for details of the VOX function. D TX permission Selects whether or not to allow transmitting. D Microphone gain • tX .OF: Inhibits transmitting. (Receive only) • tX .ON : Allows transmitting. (default) D Weather alert Sets the microphone gain to between 1 and 4 to suit your preference. Higher values make the microphone more sensitive to your voice. (default: mic.2) U.S.A. version only Turns the Weather Alert function ON or OFF. (p. 19) 41 (default: OFF) NOTE: When using the VOX function, we recommend setting the microphone gain to 3. However, you can adjust it to suit your operating environment (including your headset performance). SET MODES 10 D VOX delay D DTMF TX key Sets the VOX Delay to between “VXd.05” (0.5 sec.), “VXd.10” (1 sec.), “VXd.15” (1.5 sec.), “VXd.20” (2 sec.), “VXd.25” (2.5 sec.) and “VXd.30” (3 sec.). The VOX Delay is the amount of time the transmitter stays ON after you stop speaking. (default: VXd.10) Selects the method to transmit a DTMF code sequence. While pushing and holding [PTT], push one of the keys, [0] to [9], [MONI](A), [](B), [](C), [VFO/MR/CALL](D), [M](E),and [# ENT](F). • dmt.k • dmt.m • dmt.t D VOX time-out timer Sets the VOX time-out timer to between 1, 2, 3, 4, 5, 10 and 15 min. to prevent accidental prolonged transmission for the VOX function. To turn the function OFF, select “Vto.OF.” (default: Vto.03) : Transmits the appropriate DTMF code assigned to the key. (default) :T ransmits the programmed DTMF code sequence in the DTMF memory channel assigned to the key. : N o DTMF code can be transmitted. However, while pushing and holding [PTT], push either the [] or [] to transmit a 1750 Hz tone burst signal. D Operating mode Set the operating mode to FM or FM-N. The operating mode is determined by the modulation of the radio signals. (default: W/n. W) FM mode FM-N mode 10 11 12 13 14 15 16 17 18 19 42 10 SET MODES ■ Initial Set mode programming The Initial Set mode can be accessed at power ON and allows you to set seldom-changed settings, to suit your preference and operating style. • Key-touch beep (p. 44) • Time-out timer (p. 44) D Initial Set mode operation q While pushing and holding [] and [], turn the power ON to enter the Initial Set mode. w Push [] or [] to select the desired item. e Rotate [VOL] to select the option or value. r To exit the Initial Set mode, push [# ENT]. • Auto repeater* (p. 44) • Auto power-OFF (p. 44) • Lockout (p. 45) • Squelch delay (p. 45) • Auto low power (p. 47) : Push : Push • DTMF speed (p. 45) *Appears for only the U.S.A. version transceivers. • Battery protection function (p. 47) • Dial assignment (p. 45) • Microphone simple mode (p. 47) 43 • Select speed (p. 46) • Power save (p. 46) • LCD contrast (p. 46) • Display type (p. 46) SET MODES 10 ■ Initial Set mode items D Key-touch beep D Auto repeater Turns the key-touch beep ON (the beep level 1 to 3) or OFF. The Auto Repeater function automatically turns ON or OFF the duplex operation and the tone encoder. The offset and the repeater tone are not changed by the function. Reset these settings, if necessary. • When changing the beep level, beeps sound at the level. (default: bEP. 2) D Time-out timer To prevent accidental prolonged transmission, the transceiver has a time-out timer. This function cuts transmission OFF after 1–30 min. of continuous transmission. To turn the function OFF, select “tot.OF.” • tot.OF : Turns the function OFF. (default) • tot. 1–30 : If continuous transmission exceeds the selected period, the transmission will be cut off. • RPt.OF • RPt.R1 • RPt.R2 U.S.A. version only : Turns the function OFF. : Activates for only duplex. (default) :A ctivates for both duplex and tone. D Auto power-OFF The transceiver can be set to beep and automatically turn OFF, when no key operation occurs during a specified period. • POF.OF : Turns the function OFF. (default) • POF.30/1H/2H : The transceiver is automatically turned OFF when no operation occurs during the selected period. NOTE: The setting is maintained even after the transceiver is turned OFF by the auto power-OFF function. To cancel the function, select “POF.OF.” 10 11 12 13 14 15 16 17 18 19 44 10 SET MODES D Lockout D DTMF speed Selects the lockout type between repeater, busy and OFF. Selects a desired DTMF transfer speed. • RLO.OF • RLO.RP • dtd. 1 : 100 msec. interval; 5.0 cps rate (default) • dtd. 2 : 200 msec. interval; 2.5 cps rate • dtd. 3 : 300 msec. interval; 1.6 cps rate • dtd. 5 : 500 msec. interval; 1.0 cps rate (cps=characters per second) • RLO.bU : Turns the function OFF (default). : The repeater lockout function inhibits transmitting when the channel is busy, except while receiving a signal that includes a matched tone. : The busy lockout function inhibits transmitting while receiving a signal. D Squelch delay Sets the squelch delay between short and long. The delay prevents the squelch from repeatedly opening and closing while receiving the same signal. • Sqd. S • Sqd. L : Sets the squelch delay to short (default). : Sets the squelch delay to long. D Dial assignment Selects whether or not to use [VOL] as a tuning control instead of [] and []. When [VOL] functions as a tuning control, [] and [] function as volume controls. • tOP.VO • tOP.dI : Audio volume control (default) : Tuning dial [ VOL] and []/[] function as described below, depending on the option. 45 Option [VOL] []/[] tOP.VO Volume control Tuning controls tOP.di Tuning control Volume controls SET MODES 10 D Display type D Power save Selects the display type for memory mode operation. The power save function allows you conserve battery life by selecting the duty cycle of the receiver. Select the ratio of the power save time to the standby time. To turn the function OFF, select “P–S.OF.” • dSP.FR • dSP.CH • dSP.nm : Displays the programmed frequency. (default) :D isplays the memory channel number. Operable functions, configurable items in the Set mode, and selectable modes will be restricted. :D isplays the channel name. If no memory name is programmed, the programmed frequency will be displayed. • P–S.OF • P–S. 2 • P–S. 8 • P–S.16 • P–S.At : Turns the function OFF. : Sets the duty cycle to 1:2. : Sets the duty cycle to 1:8. : Sets the duty cycle to 1:16. : Automatically sets the duty cycle. (default) D LCD contrast Selects the LCD contrast. • Lcd.LO • Lcd.At : Sets the contrast to low. : Sets the contrast to high. However, if the transceiver is exposed to high temperatures, it automatically sets the contrast to low. (default) D Select speed The tuning speed acceleration automatically speeds up the tuning speed when rotating [VOL] rapidly. • S–S. m • S–S. At : Turns the tuning speed acceleration OFF. : Turns the tuning speed acceleration ON. (default) 10 11 12 13 14 15 16 17 18 19 46 10 SET MODES D Microphone simple mode Microphone simple mode is used to assign the essential operations to the four switches (S1 to S4) on the remote control unit. • mS .Sm S1 S2 S3 S4 D Battery protection Selects the Call channel. Turns the monitor function ON or OFF. Selects memory channel 0. Selects memory channel 1. When the battery voltage decreases, the battery protection function automatically turns the transceiver OFF. Select the function according to your battery type. (default: differs depending on the version) • mS .n1 (default) S1 Toggles the VFO mode and the memory mode. S2 Selects the Call channel. S3 Frequency or memory channel “UP.” S4 Frequency or memory channel “DOWN.” • bAt.OF • bAt.nm • bAt.LI : Turns the function OFF. Select when you use the BP-263 battery case. : Select when you use the BP-264 Ni-MH battery pack. : Select when you use the BP-265 Li-Ion battery pack. • mS .n2 S1 S2 S3 S4 Toggles the VFO mode and the memory mode. Turns the monitor function ON or OFF. Frequency or memory channel “UP.” Frequency or memory channel “DOWN.” OTE: BE SURE to select an appropriate option accordN ing to your battery type. •U ser remote control unit The below circuit is for reference only. D Auto low power to the [SP] jack 2.7kW 6.8kW 15kW 33kW S1 S2 S3 S4 REMOTE 3.5(d) mm SP GND – EXTERNAL SPEAKER ‗ 700 mW (8 W) Rated input > 47 Turns the auto low power function ON or OFF. When the temperature goes below 0°C (+32°F), the function automatically sets the output power to low. In that case, the transmit power selections (Hi/Mid) are also disabled. (default: ALP.OF) CLONING 11 ■ Cloning operation Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another. D Transceiver-to-transceiver cloning q Turn the transceiver’s power OFF, and then connect an optional OPC-474 cloning cable to the [SP] jacks of the master transceiver and the sub transceiver. • The master transceiver is used to send data to the sub transceiver. e Turn the sub transceiver ON. r Push [PTT] on the master transceiver. • “CL Out” appears on the master transceiver’s display, and the signal indicator shows the data is being transferred to the sub transceiver. • “CL In” appears on the sub transceiver’s display, and the signal indicator shows the data is being received from the master transceiver. t When cloning is finished, turn both the transceivers OFF. Then turn them ON again to exit the cloning mode. NOTE: DO NOT push [PTT] on the sub transceiver during cloning. This will cause a cloning error. D Cloning using a PC The CS-V80 cloning software is also used to clone/edit contents with a PC (for Microsoft® Windows® 2000/XP or Windows Vista®) using ICF format files. Refer to the INSTRUCTIONS and the Help file that come with the CS-V80, for details. Master transceiver OPC-478UC (USB type) Sub transceiver to USB port w While pushing [FUNC](M) and [], turn the master transceiver ON to enter the cloning mode. • “CLONE” appears OPC-478 to RS-232C (RS-232C type) port Transceiver PC 10 11 12 13 14 15 16 17 18 19 48 12 RESETTING ■ Resetting The LCD may occasionally display erroneous information (e.g. when first applying power). This may be caused externally by static electricity or by other factors. If this problem occurs, turn power OFF. After waiting a few seconds, turn power ON again. If the problem persists, perform either or both of the procedures below. D All reset The all reset clears all programming and returns all settings to their factory defaults. q Push and hold [ ] for 1 sec. to turn the power OFF. w While pushing and holding [MONI] and [VFO/MR/CALL], push and hold [ ] for 1 sec. to turn the power ON. • “CLEAR” appears when resetting the CPU. D Partial reset If you want to reset the operating conditions (VFO frequency, VFO settings, and Set modes contents) without clearing the memory contents, use the partial reset. q Push and hold [ ] for 1 sec. to turn the power OFF. w While pushing and holding [VFO/MR/CALL], push and hold [ ] for 1 sec. to turn the power ON. 49 NOTE: No message appears on the display after the partial reset is done. CAUTION: The all reset returns all programmed contents to their default settings. TROUBLE SHOOTING 13 If your transceiver seems to be malfunctioning, please check the following points before sending it to a service center. PROBLEM POSSIBLE CAUSE The transceiver does not turn • The battery is exhausted. ON. • The battery polarity is reversed. • Loose connection of a battery pack/case. SOLUTION • Charge the battery pack, or replace the batteries. • Check the battery polarity. • Clean battery terminals. REF. pp. 11–13 p. 13 p. 13 No sound comes from the • Volume is too low. • Rotate [VOL] to adjust to a desired level. p. 14 speaker. • An external speaker or a cloning cable is • C heck the external speaker connection or remove – connected to the [SP] jack. the cloning cable. Transmitting is impossible. • The battery is exhausted. • TX permission is inhibited. Transmitting using the VOX • The VOX gain is set to OFF or too low. function is impossible. • The microphone gain is too low. • Charge the battery pack, or replace the batteries. pp. 11–13 • Set the TX permission setting to “ON” in the Set mode. p. 41 •S et the VOX gain to a suitable level. • Set the microphone gain to a suitable level. Contacting with another sta- • A different tone or code is used for the • Check the tone/DTCS by performing a tone scan. tion is impossible. tone/DTCS squelch. Frequency cannot be set. pp. 41, 53 p. 41 p. 34 • P ush [FUNC](M), then push and hold [ ] p. 18 (# ENT) for 1 sec. to cancel the key lock function. • The memory mode, Call channel mode, or • Push [VFO/MR/CALL] several times to select the p. 15 weather channel mode is selected. VFO mode. • The key lock function is activated. A programmed scan does not • The memory mode, Call channel mode, or • Push [VFO/MR/CALL] several times to select the p. 15 start. weather channel mode is selected. VFO mode. • The same frequency has been programmed • P rogram different frequencies in the scan edge p. 25 in the scan edge channels, “XA”–“Xb.” channels. A memor y scan do e s n o t • The VFO mode or Call channel mode is • Push [VFO/MR/CALL] several times to select the p. 15 start. selected. memory mode. • Only one or no memory channel has been • Program 2 or more memory channels. p. 25 programmed. The displayed frequency is er- • The CPU has malfunctioned. roneous. • External factors have caused a fault. • Reset the transceiver. • Remove and re-attach the battery pack/case. p. 49 p. 2 10 11 12 13 14 15 16 17 18 19 50 14 OPTIONS • BP-263 battery case Battery case for LR6 (AA) × 6 alkaline batteries. • FA-B2E vhf antenna The same antenna that is supplied with the transceiver. • BP-264 ni-mh battery pack 7.2 V/1400 mAh (Typ.) Ni-MH battery pack. Battery life: 13 hrs. (approx.; FM, high power, Tx : Rx : Standby = 5:5:90) • HM-153L earphone-mirophone Ideal for hands-free operation: clip the HM-153L (with integrated PTT switch) to your lapel or breast pocket. • BP-265 li-ion battery pack 7.4 V/1900 mAh (Min.)/2000 mAh (Typ.) Lithium Ion battery pack. Battery life: 19 hrs. (approx.; FM, high power, Tx : Rx : Standby = 5:5:90) • HM-158L/HM-159L speaker-mirophone Combination speaker-microphone that provides convenient operation while hanging the transceiver on your belt. • BC-191 desktop charger+BC-123S ac adapter For rapid charging of the Ni-MH battery pack. An AC adapter may be supplied with the charger, depending on the version. Charging time: approx. 2 hours for the BP-264. • HS-94/HS-95/HS-97 headset+OPC-2004 plug adapter cable HS-94 : Ear hook type HS-95 : Neck & arm type HS-97 : Throat microphone OPC-2004 : Allows you to connect the HS-94/HS-95/HS-97 to the transceiver. After connecting, the VOX function can be used. • BC-192 desktop charger+BC-147S ac adapter For regular charging of the Ni-MH battery pack. An AC adapter may be supplied with the charger, depending on the version. Charging time: approx. 16 hours for the BP-264. • BC-193 desktop charger+BC-123S ac adapter For rapid charging of the Li-Ion battery pack. An AC adapter may be supplied with the charger, depending on the version. Charging time: approx. 2.5 hours for the BP-265. • CS-V80 cloning software+OPC-478/OPC-478UC cloning cable Provides quick and easy programming of such settings as memory channels and Set modes contents. • OPC-474 cloning cable For transceiver-to-transceiver cloning. • CP-23L cigarette lighter cable Allows charging of the battery packs through a 12 V cigarette lighter socket. (For only BC-191/BC-193) • OPC-515L dc power cable Allows charging of the battery packs using a 12 V DC power source instead of the AC adapter. (For all chargers) • MB-124 belt clip Exclusive alligator-type belt clip. 51 Some options may not be available in some countries. Please ask your dealer for details. OPTIONS 14 ■ VOX function The transceiver has a VOX function, which allows hands-free operation. An optional HS-94, HS-95 or HS-97 headset and the OPC-2004 plug adapter cable are also required for operation. • The VOX (voice operated transmission) function starts transmission when you speak into the microphone, without needing to push [PTT]; then, automatically returns to reception when you stop speaking. D Optional unit connection q Push and hold [ ] for 1 sec. to turn the power OFF. w Remove the jack cover. (p. 2) e C onnect the optional HS-94, HS-95 or HS-97 and OPC-2004, as illustrated below. OPC-2004 HS-94 D Turning the VOX function ON or OFF q Connect an optional headset and plug adapter cable to the transceiver, and then turn the power ON. w Push [FUNC](M), and then [VOX](2) to turn the VOX function ON or OFF. • “ VOX” appears when the VOX function is ON. NOTE: •W hen using the VOX function, adjust the microphone gain and the VOX-related settings (p. 53) to suit your operating environment (including your headset performance). • Set the microphone gain before setting the VOX gain in the Set mode (p. 41). We recommend setting the microphone gain to 3. • When the TX permission is set to “OFF” in the Set mode, you cannot transmit using the VOX function. (p. 41) Appears 10 11 12 13 14 15 16 17 18 19 52 14 OPTIONS D VOX-related settings The VOX gain, the VOX delay, and the VOX time-out timer can be set in the Set mode. q Connect an optional headset and plug adapter cable to the transceiver, and then turn the power ON. w Push [FUNC](M), and then [VOX](2) to turn the VOX function ON. e Push [FUNC](M), and then [SET](8) to enter the Set mode. r Push [] or [] to select the VOX gain (VOX), the VOX delay (VXd), or the VOX time-out timer (Vto) item. t Rotate [VOL] to select a desired option. y Push [# ENT] to exit the Set mode. The VOX function does not activate transmission while in the Set mode. If “On” is intermittent, be sure the VOX delay is set long enough to allow normal pauses in speech, but keep the VOX ON until you finish speaking. ✔ CONVENIENT! While transmitting using the VOX function, you can adjust the VOX gain simply by rotating [DIAL]. • VOX delay Sets the VOX delay to between 0.5 and 3.0 sec. (in 0.5 sec. steps). The VOX delay is the amount of time the transmitter stays ON after you stop speaking. (default: VXd.10) • VOX gain The VOX gain level can be adjusted between 1 (minimum) and 10 (maximum), or turned OFF. Higher values make the VOX function more sensitive to your voice. (default: VOX.05) The VOX delay is set to 1 sec. The VOX delay is set to 3 sec. • VOX time-out timer The VOX function is turned OFF. ➥ While speaking into the headset microphone, adjust the VOX gain until “On” continuously appears on the LCD. 53 The VOX gain is set to 10 (maximum). Appears Sets the VOX time-out timer to between 1, 2, 3, 4, 5, 10 and 15 min. to prevent accidental prolonged transmission for the VOX function. To turn the function OFF, select “Vto.OF.” (default: Vto.03) SPECIFICATIONS D General D Transmitter • Frequency coverage Version U.S.A. AUS CHN EXP EUR UK 15 : (unit: MHz) • Modulation system • Output power (at 7.2 V DC) • Max. frequency deviation TX RX 144–148 136–174 136–174 136–174 • Spurious emissions • External mic. connector 144–146 144–146 D Receiver KOR • Mode • Number of memory channels : FM, FM-N : 207 (incl. 6 scan edges and 1 Call channel) • Usable temperature range • Tuning steps : –20°C to +60°C; –4°F to +140°F : 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz • Frequency stability : ±2.5 ppm (–20°C to +60°C; –4°F to +140°F) • Power supply : Icom specified battery pack/case • Current drain (at 7.2 V DC: typical) Transmit at 5.5 W (High) : 1.4 A at 2.5 W (Mid.) 0.9 A at 0.5 W (Low) 0.6 A Receive standby : 65 mA power save 20 mA max. audio 310 mA (internal speaker) 180mA (external speaker) • Antenna connector : BNC (50 W) • Dimensions : 58(W)×112(H)×30(D) mm; (projections not included) 29⁄32(W)×413⁄32(H)×13⁄16(D) in • Weight (approx.) (without battery pack/case and ant.) : 140 g; 4.9 oz : Variable reactance freq. modulation : High 5.5 W, Mid. 2.5 W, Low 0.5 W. : FM (wide) ±5.0 kHz FM (narrow) ±2.5 kHz : Less than –60 dBc : 3-conductor 2.5 (d) mm (1⁄10˝)/2.2 kΩ • Receive system : Double-conversion superheterodyne • Intermediate frequencies : 1st: 21.7 MHz, 2nd: 450 kHz • Sensitivity (at 12 dB SINAD) : –0.14 μV typ. • Squelch sensitivity (threshold) : –0.1 μV typ. • Selectivity : FM (wide) 70 dB typ. FM (narrow) 50 dB typ. • Spurious and image rejection : 75 dB typ. • Intermodulation : FM (wide) 70 dB typ. FM (narrow) 65 dB typ. • Audio output power (at 10% distortion) Internal speaker : 0.75 W typ. with a 16 Ω load External speaker : 0.45 W typ. with a 8 Ω load • External speaker connector : 3-conductor 3.5(d) mm; (1⁄8˝)/8 Ω All stated specifications are subject to change without notice or obligation. 10 11 12 13 14 15 16 17 18 19 54 16 CE IMPORTANT • When transmitting with a portable radio, hold the radio in a vertical position with its microphone 2.5 to 5 centimetres from your head and body. • If you wear a portable two-way radio on your body, ensure that the antenna is at least 2.5 centimetres from your body when transmitting. C E Versions of the IC-V80E which display the ‘CE’ symbol on the serial number label, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/EC. This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or may be subject to licensing conditions in the country of use. Be sure to check that you have the correct version of this radio or the correct programming of this radio, to comply with national licensing requirements. 55 • List of Country codes (ISO 3166-1) 10 11 12 13 14 15 16 17 Country Austria Belgium Bulgaria Croatia Czech Republic Cyprus Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia Codes AT BE BG HR CZ CY DK EE FI FR DE GR HU IS IE IT LV 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Country Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Slovakia Slovenia Spain Sweden Switzerland Turkey United Kingdom Codes LI LT LU MT NL NO PL PT RO SK SI EP SE CH TR GB CE DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32, Kamiminami, Hirano-ku Osaka 547-0003, Japan Declare on our sole responsibility that this equipment complies with the essential requirements of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed. Kind of equipment: VHF TRANSCEIVER Type-designation: iV80E Version (where applicable): Düsseldorf 16th Oct. 2009 Place and date of issue Icom (Europe) GmbH Himmelgeister straße 100 D-40225 Düsseldorf Authorized representative name Y. Furukawa General Manager This compliance is based on confor mity with the following har monised standards, specifications or documents: i) ii) iii) iv) EN 301 489-1 v1.8.1 (Apr. 2008) EN 301 489-15 v1.2.1 (Aug. 2002) EN 301 783-2 v1.1.1 (Sep. 2000) EN 60950-1 (2001): A11: 2004 Signature 16 10 11 12 13 14 15 16 17 18 19 56 #02 Europe #12 Europe-21 #22 Europe-22 #32 Europe-23■ AT ■ BE ■ CY ■ CZ ■ DK ■ EE ■ FI ■ FR ■ DE ■ GR ■ HU ■ IE ■ IT ■ LV ■ LT ■ LU ■ MT ■ NL ■ PL ■ PT ■ SK ■ SI ■ ES ■ SE ■ GB ■ IS ■ LI ■ NO ■ CH ■ BG ■ RO ■ TR ■ HR #13 U.K.-01 #23 U.K.-02 #33 U.K.-03 ■ AT ■ BE ■ CY ■ CZ ■ DK ■ EE ■ FI ■ FR ■ DE ■ GR ■ HU ■ IE ■ IT ■ LV ■ LT ■ LU ■ MT ■ NL ■ PL ■ PT ■ SK ■ SI ■ ES ■ SE ■ GB ■ IS ■ LI ■ NO ■ CH ■ BG ■ RO ■ TR ■ HR A-6795H-1EX-0a Printed in Japan © 2009 Icom Inc. Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-702 Instance ID : uuid:d21a194f-546e-45de-a7fb-4b1e3f411960 Document ID : adobe:docid:indd:7833fc08-b796-11de-9221-baf6fea7be75 Rendition Class : proof:pdf Derived From Instance ID : 7833fc07-b796-11de-9221-baf6fea7be75 Derived From Document ID : adobe:docid:indd:4987e9c2-8d32-11de-a821-ed4953053cc0 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:534F0E7A2BAFDE11BFC2EA6B197684F9, uuid:859AE5A58AA9DE11B4F3837A3B38261C, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:81C6F9757CA2DE119F3EFE394DE3D1EC, uuid:491ECCF23BB1DE119BFD964EB52D28AA, uuid:869AE5A58AA9DE11B4F3837A3B38261C, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:E08F6593F5ABDE11ADC5C04217747F36, uuid:E18F6593F5ABDE11ADC5C04217747F36, uuid:87DEB46A9BA2DE11A798A9F452290990, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:8A9AE5A58AA9DE11B4F3837A3B38261C, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:581F11183E91DE119A22B544AADBF2EB, uuid:A0022D70E58DDE118BF9949BA1F1BE3B, uuid:A1022D70E58DDE118BF9949BA1F1BE3B, uuid:BABD04D6D28ADE1185F69522D2F0E4BA, uuid:A3022D70E58DDE118BF9949BA1F1BE3B, uuid:A4022D70E58DDE118BF9949BA1F1BE3B, uuid:A5022D70E58DDE118BF9949BA1F1BE3B, uuid:A6022D70E58DDE118BF9949BA1F1BE3B, uuid:A7022D70E58DDE118BF9949BA1F1BE3B, uuid:9F022D70E58DDE118BF9949BA1F1BE3B, uuid:18F82A20E68DDE118BF9949BA1F1BE3B, uuid:19F82A20E68DDE118BF9949BA1F1BE3B, uuid:A2022D70E58DDE118BF9949BA1F1BE3B, uuid:A8022D70E58DDE118BF9949BA1F1BE3B, uuid:6E7D271CE58ADE11BD2AF240FA19800F, uuid:52E51479E58ADE118668D50B940BC179, uuid:6E7D271CE58ADE11BD2AF240FA19800F, uuid:48117310E68ADE119B5AEC6BB56FF97F, uuid:09B75C67B29DDE11BA9186A4AAD35747, uuid:06E7E6EDD98ADE1191BFC654B985951F, uuid:08E7E6EDD98ADE1191BFC654B985951F, uuid:6CE7F72086ACDE11A3B8E1812262A7CC, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:DE88934FD0ACDE11828A9A6D5109DC4F, uuid:D7B9426AD1ACDE1185B2AF086AD2B1C6, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:03C754E8ADA9DE11B987DC93C4F938B3, uuid:05C754E8ADA9DE11B987DC93C4F938B3, uuid:DF88934FD0ACDE11828A9A6D5109DC4F, uuid:7E01518482A9DE11B605F6DB33F2083C, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:48117310E68ADE119B5AEC6BB56FF97F, uuid:982B718655B1DE11A7069138110EF915, uuid:48117310E68ADE119B5AEC6BB56FF97F, uuid:09B75C67B29DDE11BA9186A4AAD35747, uuid:C148CBBA2CAFDE11A67391DBE7640610, uuid:8B9AE5A58AA9DE11B4F3837A3B38261C, uuid:8B1F9196E68DDE118BF9949BA1F1BE3B, uuid:C248CBBA2CAFDE11A67391DBE7640610, uuid:F3486106E19BDD11AB37F7B23D378814, uuid:9314415A98A9DE11ADC6F1B301430D00, uuid:AE36627598A9DE11ACB3D75FF7FF4CED, uuid:AD36627598A9DE11ACB3D75FF7FF4CED, uuid:AF36627598A9DE11ACB3D75FF7FF4CED, uuid:B036627598A9DE11ACB3D75FF7FF4CED, uuid:02EB022FFD8DDE118BF9949BA1F1BE3B, uuid:01EB022FFD8DDE118BF9949BA1F1BE3B, uuid:13D5920D479CDE11AFE6FC012997D709, uuid:18D5920D479CDE11AFE6FC012997D709, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:EFE2FD632AAADE11A4B3B2FABA76D3F7, uuid:EDE2FD632AAADE11A4B3B2FABA76D3F7, uuid:A28ACF62C1ABDE1192DEF75474552EA1, uuid:BABD04D6D28ADE1185F69522D2F0E4BA, uuid:BABD04D6D28ADE1185F69522D2F0E4BA, uuid:BABD04D6D28ADE1185F69522D2F0E4BA, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:152AF8518693DE119B009A04DA2790E7, uuid:992B718655B1DE11A7069138110EF915, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:67695DD9876DDC118F20D7342AF5793D, uuid:6DD00F4C2DAFDE119D8C88F6D790B60A, uuid:B036627598A9DE11ACB3D75FF7FF4CED, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:A0DB985933AADE118B6AD2C33C90B75F, uuid:833D382514A4DE11B345E5C269CD9970, uuid:A3DB985933AADE118B6AD2C33C90B75F, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:1A16B16220A4DE11B345E5C269CD9970, uuid:A5DB985933AADE118B6AD2C33C90B75F, uuid:9C2B718655B1DE11A7069138110EF915, uuid:B9BCF10FDE6CDC118B16E9DDEC6171C5, uuid:1816B16220A4DE11B345E5C269CD9970, uuid:FD68D024A392DE11B3E19E6170F08B89, uuid:4AD2EAF47093DE11B7CBE1FCBAB53D23, uuid:E75E1AB55BAADE11A80F9DB8E551C14C, uuid:A7926D8523B2DE11B8DBDECC81ED4F14, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:A8926D8523B2DE11B8DBDECC81ED4F14, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:C415AE5E8B96DE11A262AD6BE58F8E8F, uuid:017E0990E795DE119833C0D3F3729619, uuid:087E0990E795DE119833C0D3F3729619, uuid:077E0990E795DE119833C0D3F3729619, uuid:077E0990E795DE119833C0D3F3729619, uuid:F53A1147F595DE118890C8B60E304377, uuid:F83A1147F595DE118890C8B60E304377, uuid:B33A3A37F695DE119D07B8E954885EF8, uuid:85DC19B92DAFDE1189BAC4A2ABFFCF9B, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:CF6A9A0B6BADDE119D32F5C8342E5A30, uuid:C08572D09396DE1198568095103BF627, uuid:C18572D09396DE1198568095103BF627, uuid:7DDCB5A671AADE1198A58AB96368D2FE, uuid:9DFB0BD4B296DE11B218EC857B23C2B1, uuid:A0FB0BD4B296DE11B218EC857B23C2B1, uuid:F2C118A39F96DE11BA70C5594B314BE0, uuid:F3C118A39F96DE11BA70C5594B314BE0, uuid:73AF493AB896DE11A8B9AE0C4C4A775C, uuid:71EC212533B2DE11B608D2440A7473A3, uuid:F539EA3533B2DE11BD76AB87E735D800, uuid:6E7D271CE58ADE11BD2AF240FA19800F, uuid:9AC90B14069DDE11BDF6A42880172F4F, uuid:F939EA3533B2DE11BD76AB87E735D800, uuid:11E1A5B746B2DE11908E9F40A8251A24, uuid:52E51479E58ADE118668D50B940BC179, uuid:6E7D271CE58ADE11BD2AF240FA19800F, uuid:69363BE4949DDE11BAF7E8D07C70E7A7, uuid:68363BE4949DDE11BAF7E8D07C70E7A7, uuid:5D9F37CBCE9DDE11927BC72708C4A323, uuid:624813A3CD9DDE11A302EF0D3A5832B8, uuid:644813A3CD9DDE11A302EF0D3A5832B8, uuid:674813A3CD9DDE11A302EF0D3A5832B8, uuid:674813A3CD9DDE11A302EF0D3A5832B8, uuid:950A56573EA3DE1185629027BA9DBBC5, uuid:9D2B718655B1DE11A7069138110EF915, uuid:14908A998B8CDE118691956BB9F135AD, uuid:17908A998B8CDE118691956BB9F135AD, uuid:B9BCF10FDE6CDC118B16E9DDEC6171C5, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:1A908A998B8CDE118691956BB9F135AD, uuid:BBBCF10FDE6CDC118B16E9DDEC6171C5, uuid:DB74F14E958CDE11AD17EAD825F1963D, uuid:612E08198D8CDE118691956BB9F135AD, uuid:642E08198D8CDE118691956BB9F135AD, uuid:42CEFF3A8E8CDE118691956BB9F135AD, uuid:45CEFF3A8E8CDE118691956BB9F135AD, uuid:AA609141998CDE11AB23C1F937373E9F, uuid:48CEFF3A8E8CDE118691956BB9F135AD, uuid:4BCEFF3A8E8CDE118691956BB9F135AD, uuid:47342E3D8F8CDE118691956BB9F135AD, uuid:1996EE0ACBABDE11A3EAAB7C895C5954, uuid:4A342E3D8F8CDE118691956BB9F135AD, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:1A96EE0ACBABDE11A3EAAB7C895C5954, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:50342E3D8F8CDE118691956BB9F135AD, uuid:1B96EE0ACBABDE11A3EAAB7C895C5954, uuid:1E721737908CDE118691956BB9F135AD, uuid:1C96EE0ACBABDE11A3EAAB7C895C5954, uuid:82B6ED29BBACDE11BF808F04105B0BBD, uuid:9100AC43CE96DE1198F08D48CA341423, uuid:5383793E3BB1DE118727A9CE3FB8F049, uuid:73A273984B97DE119E7AC608B4BC887D, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:52DE1B976297DE11A97C8556CAE22DE5, uuid:91B95F4B4F97DE119819DE1D22F795AE, uuid:28B78918D9ABDE11A3EAAB7C895C5954, uuid:4CCF6EDB5097DE11A97C8556CAE22DE5, uuid:4FCF6EDB5097DE11A97C8556CAE22DE5, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:17C1217F5697DE11A97C8556CAE22DE5, uuid:5936DDC0E2ABDE11B365CB31FA9F29D1, uuid:1CC1217F5697DE11A97C8556CAE22DE5, uuid:1FC1217F5697DE11A97C8556CAE22DE5, uuid:4FDE1B976297DE11A97C8556CAE22DE5, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:6036DDC0E2ABDE11B365CB31FA9F29D1, uuid:5C36DDC0E2ABDE11B365CB31FA9F29D1, uuid:5F36DDC0E2ABDE11B365CB31FA9F29D1, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:5EDFE5992BA3DE118BD3869BE6E12BD7, uuid:471ECCF23BB1DE119BFD964EB52D28AA, uuid:9E33E3678FACDE118CEDD7B37468E30D, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:980A56573EA3DE1185629027BA9DBBC5, uuid:930A56573EA3DE1185629027BA9DBBC5, uuid:BABD04D6D28ADE1185F69522D2F0E4BA, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:6136DDC0E2ABDE11B365CB31FA9F29D1, uuid:A372A1DD27A4DE11942F8E7F19E5F8B2, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:F1FD87D74767DC11A9FBEE8A536F9759, uuid:DF8F6593F5ABDE11ADC5C04217747F36, uuid:1B96EE0ACBABDE11A3EAAB7C895C5954, uuid:4B6813CF64A3DE11B42BEFE9674C89E8, uuid:F839EA3533B2DE11BD76AB87E735D800, uuid:2610182586A7DC11BEFD99035C4F7B1E, uuid:2610182586A7DC11BEFD99035C4F7B1E, uuid:05FBF57685ADDE11B51FE71C4308633A Manifest Reference Document ID : uuid:524F0E7A2BAFDE11BFC2EA6B197684F9, uuid:4D99FB89C492DE119C81BCDBC1C0A428, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:7FC6F9757CA2DE119F3EFE394DE3D1EC, uuid:7CC6F9757CA2DE119F3EFE394DE3D1EC, uuid:14B4EA2F3D98DE11B3FAC9B2075F924F, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:DDD86A547DA2DE118D9C9DC00E0E4809, uuid:4E2B47BEF5A3DE1192EFB256E1B8EC8F, uuid:85DEB46A9BA2DE11A798A9F452290990, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:7318BF9F538CDE11BC5DF46F7A6210E5, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:B8BD04D6D28ADE1185F69522D2F0E4BA, uuid:D7607E0B26BCDD11B2ABAF44C9044CA8, uuid:D9607E0B26BCDD11B2ABAF44C9044CA8, uuid:AD840875406BDC11A89DA93B85F40D12, uuid:DF607E0B26BCDD11B2ABAF44C9044CA8, uuid:641688C728BCDD11B2ABAF44C9044CA8, uuid:681688C728BCDD11B2ABAF44C9044CA8, uuid:621688C728BCDD11B2ABAF44C9044CA8, uuid:661688C728BCDD11B2ABAF44C9044CA8, uuid:880EF1C72483DE11AA06C5188CB757FA, uuid:72E9D2AFE45CDC118DABCA9C3D4123CC, uuid:2F1130B16093DD11BBF18897CD36CC9F, uuid:DD607E0B26BCDD11B2ABAF44C9044CA8, uuid:6A1688C728BCDD11B2ABAF44C9044CA8, uuid:6D7D271CE58ADE11BD2AF240FA19800F, uuid:51E51479E58ADE118668D50B940BC179, uuid:6D7D271CE58ADE11BD2AF240FA19800F, uuid:F2FD87D74767DC11A9FBEE8A536F9759, uuid:4329FAE14A67DC11A9FBEE8A536F9759, uuid:05E7E6EDD98ADE1191BFC654B985951F, uuid:07E7E6EDD98ADE1191BFC654B985951F, uuid:CEE439DD3B67DC11A9FBEE8A536F9759, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:9C1E13EE1798DE11986FF74CDCC7347F, uuid:2B4479F287A9DE11BB72C57B7B06621B, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:02C754E8ADA9DE11B987DC93C4F938B3, uuid:04C754E8ADA9DE11B987DC93C4F938B3, uuid:9F1E13EE1798DE11986FF74CDCC7347F, uuid:41735AAA88A2DE11BCF1908490F3259D, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:F2FD87D74767DC11A9FBEE8A536F9759, uuid:FD02D3687393DE119CDFC70C51F28780, uuid:F2FD87D74767DC11A9FBEE8A536F9759, uuid:4329FAE14A67DC11A9FBEE8A536F9759, uuid:3DFF642A3985DD11A253F68969AC816A, uuid:099AD1773191DE119A22B544AADBF2EB, uuid:8A1F9196E68DDE118BF9949BA1F1BE3B, uuid:841F9196E68DDE118BF9949BA1F1BE3B, uuid:3F4580C72285DD11A253F68969AC816A, uuid:0F9AD1773191DE119A22B544AADBF2EB, uuid:C0C510A13591DE119A22B544AADBF2EB, uuid:97412B72039DDE11BDF6A42880172F4F, uuid:9C412B72039DDE11BDF6A42880172F4F, uuid:501F11183E91DE119A22B544AADBF2EB, uuid:FDEA022FFD8DDE118BF9949BA1F1BE3B, uuid:FFEA022FFD8DDE118BF9949BA1F1BE3B, uuid:8C1F9196E68DDE118BF9949BA1F1BE3B, uuid:16D5920D479CDE11AFE6FC012997D709, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:EEE2FD632AAADE11A4B3B2FABA76D3F7, uuid:AACB1EE5D991DE11A3B4903D5F80432D, uuid:ADCB1EE5D991DE11A3B4903D5F80432D, uuid:AD840875406BDC11A89DA93B85F40D12, uuid:AD840875406BDC11A89DA93B85F40D12, uuid:AD840875406BDC11A89DA93B85F40D12, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:C4C510A13591DE119A22B544AADBF2EB, uuid:C8C510A13591DE119A22B544AADBF2EB, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:66695DD9876DDC118F20D7342AF5793D, uuid:531F11183E91DE119A22B544AADBF2EB, uuid:501F11183E91DE119A22B544AADBF2EB, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:23DDCAD3DEC7DD11843AEC0559EFD8AA, uuid:813D382514A4DE11B345E5C269CD9970, uuid:A1DB985933AADE118B6AD2C33C90B75F, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:92D3125EE091DE11A78EDC2CE2D93F3C, uuid:A4DB985933AADE118B6AD2C33C90B75F, uuid:9A2B718655B1DE11A7069138110EF915, uuid:B8BCF10FDE6CDC118B16E9DDEC6171C5, uuid:0F894A13EB91DE11BDDFA70EDFEFD5C1, uuid:FB68D024A392DE11B3E19E6170F08B89, uuid:47D2EAF47093DE11B7CBE1FCBAB53D23, uuid:DB1175AE7293DE119B009A04DA2790E7, uuid:E01175AE7293DE119B009A04DA2790E7, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:E951811FFA95DE11B068B3F2A570B37D, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:C315AE5E8B96DE11A262AD6BE58F8E8F, uuid:FF7D0990E795DE119833C0D3F3729619, uuid:027E0990E795DE119833C0D3F3729619, uuid:057E0990E795DE119833C0D3F3729619, uuid:057E0990E795DE119833C0D3F3729619, uuid:F33A1147F595DE118890C8B60E304377, uuid:F63A1147F595DE118890C8B60E304377, uuid:B13A3A37F695DE119D07B8E954885EF8, uuid:EBB0D33F4BA3DE11AAAFFA86CEBD1BD1, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:A9E2B7779296DE11AA47C71FD1F4C7F0, uuid:ABE2B7779296DE11AA47C71FD1F4C7F0, uuid:594175B7CE6CDC118B16E9DDEC6171C5, uuid:CA429047D06CDC118B16E9DDEC6171C5, uuid:9CFB0BD4B296DE11B218EC857B23C2B1, uuid:9EFB0BD4B296DE11B218EC857B23C2B1, uuid:535D81A79C96DE118C92D0DBC1B4B4FD, uuid:575D81A79C96DE118C92D0DBC1B4B4FD, uuid:71AF493AB896DE11A8B9AE0C4C4A775C, uuid:D39AAF2DC196DE118F7FE078A21876C6, uuid:D59AAF2DC196DE118F7FE078A21876C6, uuid:6D7D271CE58ADE11BD2AF240FA19800F, uuid:BD724B966298DE118846EE3347201ED8, uuid:7C763858E798DE11A6179CA607DE6108, uuid:7F763858E798DE11A6179CA607DE6108, uuid:51E51479E58ADE118668D50B940BC179, uuid:6D7D271CE58ADE11BD2AF240FA19800F, uuid:21234306199DDE118655FB0D6729466B, uuid:63363BE4949DDE11BAF7E8D07C70E7A7, uuid:66363BE4949DDE11BAF7E8D07C70E7A7, uuid:614813A3CD9DDE11A302EF0D3A5832B8, uuid:634813A3CD9DDE11A302EF0D3A5832B8, uuid:654813A3CD9DDE11A302EF0D3A5832B8, uuid:654813A3CD9DDE11A302EF0D3A5832B8, uuid:940A56573EA3DE1185629027BA9DBBC5, uuid:EC75385F515CDD11827D892A07B76F02, uuid:13908A998B8CDE118691956BB9F135AD, uuid:15908A998B8CDE118691956BB9F135AD, uuid:B8BCF10FDE6CDC118B16E9DDEC6171C5, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:18908A998B8CDE118691956BB9F135AD, uuid:BABCF10FDE6CDC118B16E9DDEC6171C5, uuid:1B908A998B8CDE118691956BB9F135AD, uuid:5D2E08198D8CDE118691956BB9F135AD, uuid:622E08198D8CDE118691956BB9F135AD, uuid:652E08198D8CDE118691956BB9F135AD, uuid:43CEFF3A8E8CDE118691956BB9F135AD, uuid:A9609141998CDE11AB23C1F937373E9F, uuid:46CEFF3A8E8CDE118691956BB9F135AD, uuid:49CEFF3A8E8CDE118691956BB9F135AD, uuid:4CCEFF3A8E8CDE118691956BB9F135AD, uuid:1796EE0ACBABDE11A3EAAB7C895C5954, uuid:48342E3D8F8CDE118691956BB9F135AD, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:4B342E3D8F8CDE118691956BB9F135AD, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:4E342E3D8F8CDE118691956BB9F135AD, uuid:1A721737908CDE118691956BB9F135AD, uuid:1C721737908CDE118691956BB9F135AD, uuid:14D5920D479CDE11AFE6FC012997D709, uuid:C9FE4604818CDE11BAF9F6C9985024E6, uuid:8F00AC43CE96DE1198F08D48CA341423, uuid:9200AC43CE96DE1198F08D48CA341423, uuid:71A273984B97DE119E7AC608B4BC887D, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:50DE1B976297DE11A97C8556CAE22DE5, uuid:8FB95F4B4F97DE119819DE1D22F795AE, uuid:47CF6EDB5097DE11A97C8556CAE22DE5, uuid:4ACF6EDB5097DE11A97C8556CAE22DE5, uuid:4DCF6EDB5097DE11A97C8556CAE22DE5, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:50CF6EDB5097DE11A97C8556CAE22DE5, uuid:18C1217F5697DE11A97C8556CAE22DE5, uuid:1BC1217F5697DE11A97C8556CAE22DE5, uuid:1DC1217F5697DE11A97C8556CAE22DE5, uuid:20C1217F5697DE11A97C8556CAE22DE5, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:169891A742AADE11A0A6FB7ADDFD5A46, uuid:5A36DDC0E2ABDE11B365CB31FA9F29D1, uuid:5D36DDC0E2ABDE11B365CB31FA9F29D1, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:53DE1B976297DE11A97C8556CAE22DE5, uuid:56DE1B976297DE11A97C8556CAE22DE5, uuid:240D2F286E97DE11A97C8556CAE22DE5, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:960A56573EA3DE1185629027BA9DBBC5, uuid:920A56573EA3DE1185629027BA9DBBC5, uuid:AD840875406BDC11A89DA93B85F40D12, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:B9F0D1E7EA95DE1186E3C076EF9138C9, uuid:9F72A1DD27A4DE11942F8E7F19E5F8B2, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:F0FD87D74767DC11A9FBEE8A536F9759, uuid:DD8F6593F5ABDE11ADC5C04217747F36, uuid:1A721737908CDE118691956BB9F135AD, uuid:8E553BD958A3DE11A35BDCD17EB23C89, uuid:F639EA3533B2DE11BD76AB87E735D800, uuid:2510182586A7DC11BEFD99035C4F7B1E, uuid:2510182586A7DC11BEFD99035C4F7B1E, uuid:03FBF57685ADDE11B51FE71C4308633A Create Date : 2009:10:13 10:22:42+09:00 Modify Date : 2009:11:18 09:55:38-05:00 Metadata Date : 2009:11:18 09:55:38-05:00 Creator Tool : Adobe InDesign CS2_J (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6740 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Has XFA : No Page Count : 27 Creator : Adobe InDesign CS2_J (4.0.5)EXIF Metadata provided by EXIF.tools