INTO TECH REALDISPLAY DVR BD User Manual Part 2
Intotech Inc. DVR BD Users Manual Part 2
Contents
- 1. Users Manual Part 1
- 2. Users Manual Part 2
Users Manual Part 2
GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 2-2-3. Uninstall DVR Server program 1. Under the Start menu in Windows, go to Setting and then to Control Panel 2. Double click the Add or Remove Programs 3. Select DVR System Plus and Click on Change/Remove button. 3. Click Remove button and Press the [Next] button. 4. Press the Finish button to complete uninstalling DVR program. The uninstall program will delete all DVR system files on your hard disk. However, it does not delete the video images and the log files already saved in the hard drive of your DVR PC. -31-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Chapter 3 User Manual for SmartDVR Formula v2.0 Monitoring Screen (Main View) Mode Search Screen Mode View Screen Search Screen -32-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 3-2. General User Guide 3-1 Main features and functions 1. Operating System (O/S) DVR system uses Windows 2000/XP as a basic OS and is designed to operate all needed functions of DVR System properly. 2. Main Program The main program operates Search, Backup, Recording, and every function to control DVR System and it has the following functions and features 1) Easy to search According to date, time, and camera, the user is able to execute instant, speedy, conditional, and magnified searched video images. 2) Backup & Print function Able to print out searched images and provides Backup function 3) Switcher (Auto –Selector) function 4) Screen Division Function The user is able to select the following screen division: 1, 4, 8, 9, 10, 13, 16, and full screen 5) Record speed control function The user is able to adjust recording rate 6) Record qualify setup per CH function Able to manage HDD space efficiently by adjust recording quality per channel 7) Motion Detection Function (MD) The user is able to setup motion area, and record the image when the motion image is detected in the area. (Recording, Event processing function) 8) PAN/TILT Control Function P/T/Z built in the system (Requirement of Receiver Device) -33-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 9) Alarm connection with Camera & Sensor Connect with emergency bell and alarm while MD & Sensor are operating 10) Watch Dog When system function does not operate properly or emergency shutdown, watchdog function operates auto reset/restoration existed data 11) Water Mark A copyright-protection method of embedding a code into a digital audio or video file to attempt to thwart piracy or unlicensed use 12) Image Transmission (Option) Remote sites image transmission by using PSTN (Able to monitor remote sites from Web Browser and NetClient program) 13) Store Resolutions Support 320×240 pixels, 640x480 pixels 14) Line Monitoring - Image Signal Monitoring Function 15) Schedule 16) Record, Digital-Out, and Alarm function 17) Password -34-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 3-2 Monitoring Screen Mode 1 : Standard Display Screen 2 : 1CH recording screen (represented by 3 : Schedule Motion Detection Recording Screen (represented by 4 : Motion Detection Store Screen (represented by 5, 6 : Please refer to full description as below - Next Page - -35-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 5 Full Description (Part A) Search Mode Configuration Lock /Unlock G aGyG G G G G G G G G aGhG G 4 CH Mode 6 CH Mode 8 CH Mode 9 CH Mode 10 CH Mode 13 CH Mode 16 CH Mode= Automatically switch to next screen through periodic time Full Display Mode Light On/Off Auto Pan P/T/Z Power -36-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 6 : Full Description (Part B) 1 : Sound volume control 2 : Power 3: : Camera On : Camera Off 4 : Indicate item under LAN / MODEM connection TCP : support up to max. 100 users MODEM: support one user -37-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG Double Click on configuration ( SmartDVR Formula 2.0G ) icon in Main View Screen. 1) General 1. Start Windows : Automatically execute program when start of Windows : Execute Full Screen Size when run DVR program 2. Exit DVR program : Only exit DVR Program : Restart Windows when exit DVR program : Shutdown Windows when exit DVR program 3. Audio volume control : Audio volume setting : Setup volume for AUD 1 ~ AUD8 : Snd Card = Setup Sound Card volume. -38-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 4. Camera and audio configuration 1 : Select camera type (NTSC, PAL) 2 : Select camera channel 3 : Select display resolution for each camera channel 4 : Select audio device 5 : Indicate technical support information 1. Video Resolution 320x240 640x480 SDVR 16CH 16CH HDVR 16CH 16CH HPLUS 16CH Support up to 6CH 2. Audio SDVR Support up to 2CH HDVR Support up to 5CH HPLUS Support up to 9CH -39-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 2) Channel 1. Selecting the camera CH/Apply change to all camera CH 2. Insert the place name of selected camera 3. Switching delay time for screen-partition mode 4. (Search Screen) (Monitoring Screen) -40-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 5 : Assign control color tone (Direction) Click color you wish to change Select Color you wish to change and then click confirmation button 6 : Select you wish to change character form, and size 7 : Preview selected result from step ( ) ~ to step ( 8 : Adjust Picture Quality -41-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 3) Store 1 : Check the HDD where you want to use for storage 2 : Indicates total HDD space for selected HDD in [1]. 3 : Select to use overwrite function EX> Start to overwrite when HDD Free space becomes 512 MB 4 : Display Picture Quality and Setting stored-frame Display frame number of each channel (30Frame per Second) : Higher FPS provides more natural image Setting compress quality -42-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 5 : Watermark Setup : Select Watermark : Display DVR Mark as default image : The user can define own mark -43-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 4) Network 1.: Network Server : Use LAN : Use MODEM 2 : Indicates DVR IP address and MAC address. 3.: Limit of possible simultaneous client connection Network Access Port: Select Port No. while Client is accessing to Server Max. Accessing User Number: Assign Accessing User Number (Max. 100 Client number) -44-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G ୖ Register Dynamic IP : Service for dynamic IP users G DHS ( Dynamic Host Services) Dynamic IP users IP address changes frequently which causes inconvenience to check IP address each time when connection. DHS executes a role as fixing Dynamic IP to Static IP. For more information please connect to http://chainip.com/eng For any questions regarding DHS service, please contact: TEL: 82-2-566-3288 OR dhs@intotech.co.kr ) part is not activated: For Dynamic IP users when ( Please click ‘register Dynamic IP by force’ For Sharing IP users : Please click ‘User of Sharing IP’ 4. IP Manager setup IP Manager configuration Disable : Allow any IP for connection. White IP : Allow selected IP for connection. Black IP : Prohibit connection of selected IP. -45-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G ୖ Network Configuration ୖ (White IP setup) < ㉘㥉 㤸 > < Before setup > < After setup > 1 : Click White IP in [1]. 2 : If ‘Add IP’ is activated please insert IP address. 3 : Cllick [2] button and IP address will be added to White IP List. (Black IP setup) < Before setup > < After setup > 1 : Click Black IP in [1]. 2 : If ‘Add IP’ is activated please insert IP address. 3 : Click [2] button to add IP in Black IP List. -46-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 5) Schedule 1, 3 : Setup Recording, MD, Sensor schedule. 2 : Choose channel in [1]. [1, 3 Schedule setup] Draw> Click Mouse-Left button to Drag Erase> Click Mouse-Right button to Drag -47-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G -48-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 6) Maintenance 1 : Display Windows Information (OS, CPU, RAM) 2 : Display DVR Information 3 : Display operating program contents of DVR System 4 : Select Data Verification as run DVR program Normal Check Mode: Ordinary Check (Fast Checking Speed) Full Check Mode: Detail Check (Slow Checking Speed) 5 : Auto reboot system -49-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 7) Event 1 : Select camera channel you wish to change Click Apply All button to apply all channels 2 : Setting up Sensor of existing operating camera channel (Optional) 3 : Setting up Digital Output(Optional) 4 : Select any Warning Sound. (Item 2, 3, 4) applies only when I/O installed in DVR 5 : Duration of warning time when sensor input. -50-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Motion Detection StoreG Motion detection is to detect any relevant changes in the image or video. Motion detection demonstrates how sensitive peripheral version is to motion. At a certain point, you can no longer see the object. If the object starts moving, you will become aware of it, even though you could not see it while it was stationary. MD Setting Area Mouse-Left button Drag and Drop: Select MD Area Mouse-Right button Drag and Drop: Unselect MD Area Mouse Left button Double Click: Select all of the Area Mouse Right button Double Click: Unselect all of the Area 6 : Motion Detection Configuration - Check Point : Motion Detection Display, MD Driven-Recording, Draw Small MD Box -51-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G - Check Point : Display MD, Record MD images - Check Point : Record MD images 7 : MD Sensitivity Setting -52-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 8) Receiver 1 : Select the serial port to use (COM1,COM2)) 2 : Display current receiver information 3 : For expansion of Pan/Tilt function : Swap vertical command of P/T protocol. : Swap horizontal command of P/T protocol. 4 : Available receiver list: (Select the receiver to use) Address of Receiver has to be equal to the channel number. Also you have to use same device. (EX: Channel 1 => HW Address) -53-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 9) VideoOut 1 : Setting Output CH number through TV-Out (Option) 2 : Select TV-Out CH 3 : Setup time of Switching Mode 4 : Appear Preview Screen -54-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 10) User Management 1 : User List 2 : Log In/Out management : Automatic log out function after setup time : Enable login & out function. 3 : Authorization of local functions and remote control < Add users > : Insert User ID and Password Click ‘Modify user information.’ -55-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG : Choose accessibility for SmartDVR Formula 2.0G DVR Server. : Choose accessibility for remote Client program.. -56-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 3-3. Search Screen Mode 1: : Playback, Rewind, 2X Playback : Save selected screen as image Choose where to save image file and write file name -57-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Print = Print Images Print SetupG 1 : Preview Printing Images 2 : Able to print maximum of 8 selected camera channels 3 : Printer Setup Option -58-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Click the [OK] button to print 4 : 1 CH original copy size 1 channel image print out 1channel double size image print out 2 channels double size images print 4 channels images print out 8 channels images print out -59-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Watermark Direction to use Watermark 1. Save image from search screen and view screen Save image by click save button after select channels - Next Page - -60-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG 2. Click the watermark icon ( SmartDVR Formula 2.0G ) from searched Screen Mode Open File to bring saved data Open File Save image from View Screen and Search Screen - Next Page - -61-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G 3.Click the [WM Detect] to watermark Image has not been tampered 1 : Show saved image. 2 : Show defined Mark by user at Configuration Mode 3 : Show Mark hidden in real image 4 : Show information related to image (Size, file formation time, modified time, process time) RESULT : It is an Original Image !! = Show that images has not been tampered 5 : WM Detect button -62-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Image has been tampered Tampered date Tampered Area 1 : Show saved image 2 : Show defined value of Watermark from Configuration Mode Display X Mark as tampered image was detected 3 : Show Mark hidden in image (Display read color at tampered area) 4 : WM Detect Button 5 : Show image information size, reading time, writing time) RESULT : The Image File was abused!! (Image has been tampered) -63-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Search 1. Move to Search Screen Mode and then Click the calendar ( ) Icon Date of saved data Current Date 2. Select Search Date and then Click [Load] Button - Next Page - -64-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Search Screen Playback saved images 2X Playback Reverse Playback Pause Search data by each frame z Hour Search z Minute Search Click the view mode ( ) icon to return to Monitoring Screen (Main View Screen) *Intotech Inc. is committed to ongoing product improvement; we therefore reserve the right to change specifications without notice. -65-G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG SmartDVR Formula 2.0G Warranty Model SmartDVR Formula v2.0 Manufactured Date Lot. No Period of Warrant. 1 Year after purchasing Purchased Date It was a qualified item to pass a strict inspection and Quality control. If it happen any problem, it will be guaranteed according to the following written description. 1. The period of warrant is one year from the date of purchasing this item. 2. In case of deficit in manufacture, when happening trouble spontaneously, We are ready to exchange or free-repairing refund or compensation. 3. If will fix up the system at Actual expense even though it in the period of Warranty as following cases; A. Mistake in using this system or trouble by handling carelessness B. Trouble by repairing and reorganizing without our company is Permission, Trouble to repair and reorganizing system by other companies Service C. Troubles or Damages by due to the natural disaster Fire, earthquake, flood etc. D. A case of Troubles by Customer’s attention of mistakes 4. If you would like to request the Application of A/S. Please contact below. -66-G CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 37 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:dbaca032-ac85-410e-9594-9d6e72c54a50 Modify Date : 2004:06:04 14:24:52+09:00 Create Date : 2004:06:04 14:24:51+09:00 Metadata Date : 2004:06:04 14:24:52+09:00 Document ID : uuid:182d88dd-5ce5-4a36-9c1c-016f301f209d Format : application/pdf Creator : Adobe Acrobat 6.0 Producer : Adobe Acrobat 6.0EXIF Metadata provided by EXIF.tools