IXI Mobile OGOCT25E CT-25E with GSM/ EDGE and Bluetooth User Manual
IXI Mobile, Inc. CT-25E with GSM/ EDGE and Bluetooth
users manual
OGO 2 User Manual OGO 2 User Manual ii 錯誤! 尚未定義樣式。 This Page should have any Legal Notices, copyright information, disclaimers etc Even though there is the Warrantee section at the end iii OGO 2 User Manual Table of Contents Introducing the Ogo ....................................................................... 1 Features .................................................................................................2 Accessories .............................................................................................2 Getting Started............................................................................... 3 Installing the SIM Card, SD Card, and Battery ..............................................3 Charging the Battery ................................................................................5 Checking the Battery Power.......................................................................5 Identifying the Low Battery Warnings ................................................. 6 Working with the Ogo .................................................................... 7 Interacting with Your Ogo - Terminology .....................................................7 Powering On Your Ogo for the First Time .....................................................8 External LEDs ..........................................................................................9 Overview of the Ogo Screen ......................................................................9 Status Bar .............................................................................................. 10 Operations Area .................................................................................. 11 Home Screen and Main Menu Options ....................................................... 12 Keyboard Functionality ........................................................................... 14 Navigation and Selection Keys ......................................................... 15 Shortcut Keys ........................................................................................ 16 Inserting Text........................................................................................ 17 Using Text Insertion Keys...................................................................... 17 Working with QuickText....................................................................... 18 Using the Foreign Character Palette ................................................ 19 Checking for Messages and Open Chats..................................................... 21 Instant Messaging........................................................................ 22 Using the Instant Messaging Wizard to Set Up Your Account......................... 22 Setting Up Your Windows Live Messenger Account ....................... 23 Setting Up Your ICQ IM Account....................................................... 24 Working with the IM Screen..................................................................... 26 IM Status Icons ..................................................................................... 27 Changing Your Status ............................................................................. 28 iv 錯誤! 尚未定義樣式。 Sending an Instant Message .................................................................... 28 Adding Emoticons to Your Instant Messages .................................. 29 Receiving an Instant Message .................................................................. 29 Closing an IM Chat Session...................................................................... 30 Managing Your IM Contacts ..................................................................... 30 Adding an IM Contact ....................................................................... 30 Viewing Contact Information ............................................................ 30 Assigning an Alerticon to an IM Contact......................................... 31 Blocking/Unblocking an IM Contact ................................................ 31 Deleting an IM Contact...................................................................... 32 Signing In ............................................................................................. 33 Signing Out........................................................................................... 33 E-Mail and SMS/Text Messaging ................................................... 34 Setting Up Your E-Mail Accounts............................................................... 34 Using the E-Mail Wizard to Set Up Your Account ............................ 34 Setting Up Your Windows Live Mail Account ................................... 35 Setting Up Your Gmail or Custom Email Account........................... 36 Accessing the Mailbox ............................................................................. 37 Viewing Your Message Lists ..................................................................... 38 Composing a Message ............................................................................ 39 Working with Messages........................................................................... 40 Opening a Message ........................................................................... 40 Viewing an Attachment ..................................................................... 40 Forwarding a Message ....................................................................... 41 Replying to a Message ....................................................................... 41 Deleting a Message ............................................................................ 42 Finding a Message .............................................................................. 43 Checking for New Messages ............................................................. 43 Viewing Your Sent Messages ............................................................. 43 Using Your Ogo Phone .................................................................. 45 Dialing a Call ......................................................................................... 45 Handling Incoming Calls.......................................................................... 47 Answering a Call – Ogo is On, Cover is Closed............................... 47 Handling an Incoming Call – Cover is Open ................................... 47 OGO 2 User Manual Handling Multiple Calls ............................................................................ 48 Making another Call While Talking on the Phone........................... 48 Receiving another Call While Talking on the Phone ...................... 48 Swapping Calls .................................................................................... 49 Joining Calls (Conferencing) ............................................................. 49 Ending a Call ......................................................................................... 49 Muting/Unmuting a Call .......................................................................... 49 Viewing Your Call Lists ............................................................................ 50 Call Timers............................................................................................ 51 Managing Your Ogo Contact List ................................................... 52 Adding Contacts..................................................................................... 53 Deleting Contacts................................................................................... 54 Working with Contact Groups................................................................... 54 Creating a Group ................................................................................ 54 Adding Contacts to Groups .............................................................. 55 Sending a Message to a Group ........................................................ 55 Viewing/Editing Contact Profiles ............................................................... 55 Assigning an Alerticon to a Contact ................................................ 56 Working with the Address Clipboard.......................................................... 56 Creating a Contact from the Clipboard ......................................... 57 Exporting Contacts ................................................................................. 58 Importing Contacts ................................................................................ 58 Synchronizing Your Contact List ............................................................... 59 Working with the Calendar ........................................................... 60 Adding an Appointment........................................................................... 61 Opening/Editing an Appointment .............................................................. 62 Deleting an Appointment......................................................................... 62 Deleting Old Appointments ...................................................................... 63 Deleting All Appointments ....................................................................... 63 Receiving Appointment Reminders ............................................................ 63 Synchronizing Your Calendar ................................................................... 64 Viewing the News......................................................................... 65 Accessing News Feeds ............................................................................ 65 Adding a News Feed ............................................................................... 66 Surfing the Internet ..................................................................... 67 Searching the Internet............................................................................ 68 Requesting a Specific URL ....................................................................... 68 vi 錯誤! 尚未定義樣式。 Working with Bookmarks......................................................................... 68 Adding a Bookmark ............................................................................ 69 Removing a Bookmark ....................................................................... 69 Adding a Folder ................................................................................... 69 Opening a Bookmark.......................................................................... 70 Viewing Your Browsing History ................................................................. 70 Ogo Extras ................................................................................... 71 Playing Ogo Blocks ................................................................................. 71 Viewing Technical Support Information...................................................... 72 Setting Your Preferences.............................................................. 73 Setting Your Phone Preferences................................................................ 74 Setting Your IM Preferences..................................................................... 77 Setting Your E-mail Preferences ............................................................... 78 Setting Your Browser Preferences ............................................................. 80 Setting Synchronization Preferences ......................................................... 82 Setting Device Preferences ...................................................................... 82 Setting Your Calendar Preferences ............................................................ 85 Setting Your Sounds Preferences .............................................................. 86 Setting the Time and Date....................................................................... 88 Setting Your Network Preferences............................................................. 89 Viewing Your System Settings.................................................................. 90 Important Safety Information ...................................................... 91 Radio Frequency (RF) Energy................................................................... 91 RF Interference/Compatibility ........................................................... 91 Potentially Explosive Atmospheres ............................................................ 92 Using Device Safely While Driving............................................................. 92 Accessories ........................................................................................... 92 Batteries and Battery Chargers ................................................................ 92 Repetitive Motion Injuries........................................................................ 93 Caring for Your Device and Charger .......................................................... 93 Device Service....................................................................................... 94 Radio Frequency Signals ......................................................................... 94 FCC Compliance Statement ..................................................................... 95 Battery Safety Precautions ...................................................................... 95 Danger! ................................................................................................. 96 RF Exposure .......................................................................................... 97 Health and Safety Information ................................................................. 97 vii OGO 2 User Manual Exposure to Radio Frequency (RF) Signals ....................................... 97 SAR Information ................................................................................... 98 Warrantee and Conditions ............................................................ 99 viii 錯誤! 尚未定義樣式。 ix OGO 2 User Manual 錯誤! 尚未定義樣式。 Introducing the Ogo Ogo is an easy-to-use handheld device which offers a variety of mobile communication methods including e-mail, instant messaging, SMS, RSS, voice and Web browsing. Ogo's interface and functionality were designed to enhance Web2.0 usability featuring a high resolution screen, built-in stereo speakers and external memory slot for an optimal visual/audio experience. The full keyboard and sleek design encourage user interaction for constant connectivity to live communities and user-content generated sites. Ogo also features the revolutionary OgoClip™ concept – a variety of optional, replaceable, tubular components, such as a 2.0 mega pixel camera, a music streamer, a Blue tooth handset and even a bottle opener. OgoClips allow users to personalize and accessorize their Ogo, keeping up with the newest mobile add-ons as they are made available. Figure 1: Ogo Device Ogo is designed for people on the go. When closed, your Ogo is only 2.5 cm. in thickness and weighs in at a mere 159 grams. 錯誤! 尚未定義樣式。 OGO 2 User Manual Features The key features of your Ogo include: Text and Instant Messaging: Dash off a quick text message or connect with contacts on your ICQ or MSN Instant Messenger lists. Ogo's finger friendly full-featured keyboard makes it fast, efficient and easy. E-mail Anywhere: Download and reply to email from multiple accounts. Ogo lets you manage messages from MS-Exchange, POP3, IMAP4, and MSN Hotmail accounts easily and efficiently, whether you're sitting in a restaurant, riding the bus, or relaxing on the beach. With Ogo you can handle attachments with ease. Download and view Word documents, PDFs, photos and more. Ogo keeps you on top of your world, wherever you are. And Ogo's PUSH email feature means you get email as soon as it hits your inbox, so there's no need to wait. Ogo keeps you in touch. RSS News Feeds: Stay in touch with your world. Download RSS news feeds for up to the moment news, information and alerts about the subjects you care about most. Voice Calls: Ogo’s full-featured and easy to use mobile phone functionality makes it that much easier to stay connected. Connect to The Web: Browse the web from practically anywhere. Blog, browse, check out your MySpace, EBay bids or the latest news and gossip - with Ogo you're in touch. Contact List and Calendar: Ogo's Personal Information Manager lets you carry your calendar and contacts’ information with you. Note: Some of the services described in this manual may not be available from your wireless carrier. Accessories Your Ogo is provided with the following accessories: 3.7V Li-ion battery 920mAh (120 hours standby, 2.5 hours usage) Charger with mini-USB connection 錯誤! 尚未定義樣式。 註解 [CS1]: Please verify accuracy 錯誤! 尚未定義樣式。 Getting Started Before you can begin to enjoy your Ogo, you need to insert the following components into the device: SIM card Battery Micro SD card (optional, for additional storage space) It is then recommended that you fully charge the battery. Installing the SIM Card, SD Card, and Battery Before you use your Ogo, you need to insert the SIM card and battery into the device. If you choose to use a Micro SD card with your Ogo, it should be inserted at the same time. ► To install the SIM card and battery: Turn your Ogo over and remove the back cover (Figure 2). Figure 2: Removing the Back Cover With its label facing up, gently slide the SIM card into the SIM card slot. Make sure the SIM card’s angled corner matches the angled corner of the SIM card slot. Note: Be careful not to scratch the SIM card's metal contact as it can easily be damaged. 錯誤! 尚未定義樣式。 OGO 2 User Manual Figure 3: Installing the SIM Card (Optional) If you want to use a Micro SD card with the device, insert the SD card in the SD card slot. Now, with the battery label facing up, match the battery contacts with the contacts in the battery slot. Push the battery in, contactsside down first (Figure 4). Figure 4: Inserting the Battery Push the other side down to slide the battery in until it clicks into place. Note: To remove the battery, gently lift it up from the side opposite the contacts. Replace the back cover (Figure 5). Note: Make sure that the battery has been properly installed before charging or powering on your Ogo. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Figure 5: Closing the Back Cover Charging the Battery The first time you charge the battery, it is recommended that you charge it for 8 consecutive hours. ► To charge the battery: With the battery properly installed, connect the charger’s power plug to the charging socket on the front of your Ogo. Plug the AC adapter into an electrical outlet. While the battery is charging, the battery charge level icon flashes, indicating that the battery is charging. When the battery is fully charged, the flashing stops and the battery charge level icon displays four solid bars Note: When your Ogo is powered off and the charger is connected, the screen indicates that the battery is charging. The charging indicator shows one of two states: Battery Charging or Battery Fully Charged. Checking the Battery Power Ogo’s battery life is dynamically calculated based on your current usage. For example, when you are sending a lot of e-mails or participating in numerous IM chat sessions, the battery power weakens faster than when your device is inactive, but powered on. The approximate power level is indicated by the number of bars on the battery level icon, which appear on both the status bar and the external LED panel. 錯誤! 尚未定義樣式。 OGO 2 User Manual Note: The approximate remaining percentage of battery power is listed in the System tab of the Settings screen. Identifying the Low Battery Warnings When battery power becomes low, a Battery Low pop-up message appears. When this happens, charge your Ogo as soon as possible. If the battery level becomes critically low, the Battery Low! pop-up message appears. In this case, you must shut down the device and recharge its battery. For more information, see Charging the Battery on page 5. In the event that the battery dies or an unexpected power loss occurs, the only information that can be lost is: • A message being composed that has not been saved as a draft. • Information entered into a currently-open contact record but not yet saved. • Text typed in an IM chat window that has not been sent. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Working with the Ogo To make it easy for you to enjoy Ogo, we recommend that your take a few minutes to get acquainted with the screen, the keyboard, and a few of the general features. Interacting with Your Ogo Terminology In this manual, the following terms have been used in the instructions to describe the ways in which you interact with your Ogo: Select refers to moving the focus on the screen to a tab, field, button or option. The selected option is highlighted on the screen. Items are selected using either the 8-way Navigation Key or the Selection Wheel. For more information, see Navigation and Selection Keys on page 15. Scroll refers to moving up or down within the items in a list or menu, for example, the Options menu. Press always refers to the pressing of physical keys on the keyboard. Pressing Enter confirms a selection. This is accomplished by pressing the Enter key or by pressing the center of the Selection Wheel. Insert refers to the entering of text using the keyboard when completing forms or composing messages. After inserting the required text, simply select the next option (without pressing Enter). For more information, see Inserting Text on page 17. Pressing the Options key displays the Options menu. The available options vary according to your current location in the application. Pressing Enter when a checkbox option is highlighted toggles the setting between selected (checked) and cleared (unchecked). 錯誤! 尚未定義樣式。 OGO 2 User Manual Powering On Your Ogo for the First Time Once your Ogo is charging (or fully charged), hold down the Power until the backlight of the screen turns on and the Ogo logo is key displayed. The first time you turn on your Ogo, a setup wizard appears, ready to guide you through the initial stages of setting up your device settings. The first screen of the Messaging Wizard prompts you to select a language. Once you have set the language, you are ready to begin to use your Ogo. ► To set the language: When prompted, scroll to the language that you want to use on the device and press Enter. Select Next and press Enter to continue. A welcome message is displayed in the selected language, and the Instant Messaging Wizard is automatically launched. You can set up your instant messaging and e-mail accounts now, or you can close the wizard and come back and complete the process later. For a description of the Instant Messaging Wizard, see Using the Instant Messaging Wizard to Set Up Your Account on page 22. For a description of the E-mail Wizard, see Using the E-Mail Wizard to Set Up Your Account on page 34. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 External LEDs When the cover of your Ogo is closed, an external LED pane displays information about the system status, new messages, IM status, battery level, and more. Figure 6: LED Display The items described in the table below appear on the LED display, from left to right. Table 1: LED Display Items Status Bar Item Description Signal strength The number of vertical bars indicates the strength of Ogo’s network connection. If a G appears in the status, the GPRS service is on. If an E appears in the status, the Edge service is on. New Message Indicator An icon indicating the presence of one or more recent messages. Tip: To view a list of the messages, press Battery charge level The number of vertical bars indicates the battery charge level. Time Displays the current time and date. Overview of the Ogo Screen The Ogo screen is divided into two main areas: 錯誤! 尚未定義樣式。 OGO 2 User Manual Status Bar Operations Area Status Bar The Ogo status bar appears at the top of your Ogo screen, and displays information about the system status, new messages, headset connection, IM status, battery level, and more. Figure 7: Sample Status Bar The items described in the following table appear on the status bar, from left to right. Table 2: Status Bar Items Status Bar Item Description Synchronization Indicates when the synchronization process is in progress (it is not displayed at other times). Screen indicator Indicates the current screen (e.g., Home, IM, Phone). Ogo Spins and flips over when you have new unread messages (e-mail, SMS/text, or IM). If you press key to check new messages but leave some messages unread, the Ogo indicator gently moves up and down. For more information, see Checking for Messages and Open Chats on page 21. indicator 10 Headset connection icons - A headset is connected to the Ogo device. IM status Indicates the status of the configured and/or messaging service(s) – ICQ Windows Live Messenger . For IM status icons and descriptions, see IM Status Icons on page 27. Language Indicates the system language in use on your Ogo (for example, EN for English). - A headset is not connected to the Ogo device. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Status Bar Item Description Time Displays the current time and date. You can manually adjust the device's time and date or receive the time and date from the network. For more information, see Setting the Time and Date on page 88. Battery charge level The number of vertical bars indicates the battery charge level. For more information, see Checking the Battery Power on page 5. Signal strength The number of vertical bars indicates the strength of Ogo’s network connection. If a G appears in the status, the GPRS service is on. If am E appears in the status, the Edge service is on. Send/Receive icon Appears as an animation during a send/receive action and disappears from the status bar when the action is complete. Mute icon Indicates that your Ogo’s audio is muted (it is not displayed at other times). For more information, see Muting/Unmuting a Call on page 49. Operations Area The Operations area appears below the Ogo status bar (which displays the name of the active screen). The content and layout of the Operations area vary according to the currently selected screen and active functionality. Many of your Ogo screens are made up of multiple pages or tabs. The names of the available tabs appear immediately below the Ogo status bar. For example, Figure 8 shows a sample of the Settings screen, which includes multiple tabs (Phone, IM, E-mail, Browser, and so on). You can move between the tabs by pressing the right and left keys on the external ring of the 8-way navigation key. The > on the tab bar indicates that you can scroll to the right to access additional tabs. 錯誤! 尚未定義樣式。 11 OGO 2 User Manual Figure 8: Sample Settings Screen Home Screen and Main Menu Options Ogo’s features can be easily accessed by selecting the required option from the Home screen or from the Main Menu. To display the Home screen, press Figure 9: Home Screen To display the Main Menu, press . The options are displayed in a column on the left side of the screen. Note: The same options are available in both locations. 12 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Table 3: Home Screen and Main Menu Options Option 錯誤! 尚未定義樣式。 Name Function Mailbox Displays the Mailbox screen, enabling you to view, sort, and send e-mail and SMS messages. For details, see Viewing Your Message Lists on page 38. Compose Displays the Compose screen, enabling you to compose and send an SMS message. For details, see Composing a Message on page 39. IM Displays the IM screen, enabling you to manage your ICQ and/or Windows Live Messenger contacts, send and receive messages, and more. For details, see Instant Messaging on page 22. Browser Displays the Browser screen, enabling you to surf the Internet. For details, see Surfing the Internet on page 67. News Displays the News screen, enabling you to stay on top of current events. For details, see Viewing the News on page 64. Calendar Displays the Calendar screen, enabling you to manage your schedule. For details, see Working with the Calendar on page 60. Contacts Displays the Contacts screen, enabling you to store contact profile information for people to whom you call, or send e-mail or text messages (regardless of whether they use IM). For details, see Managing Your Ogo Contact List on page 52. Phone Displays the Phone screen, enabling you to make and receive phone calls. For details, see Using Your Ogo Phone on page 45. 13 OGO 2 User Manual Option Name Function Extras Displays the Extras screen, enabling you to select from various external applications, and providing technical support contact details. For details, see Ogo Extras on page 71. Settings Displays the Settings screen, enabling you to configure your phone, IM, Email, browser, and other device settings. For details, see Setting Your Preferences on page 73. Keyboard Functionality The convenient layout of the Ogo keyboard enables you to easily access the various functions of your Ogo device. Figure 10: Ogo Keyboard The keyboard includes navigation and selection keys, shortcut keys, and text/character insertion keys. 14 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Navigation and Selection Keys The following keys enable you to navigate within the Ogo’s screens to select and configure the various options. Table 4: Navigation and Selection Keys Key Name Function Selection Wheel The outer ring of the selection wheel enables you to rotate through the various options on the screen. Rotate the wheel in a clockwise direction to move forward or in a counter-clockwise direction to move backward. To select an option, press the button in the center of the wheel or press Enter on the keyboard. Enter Activates a selected item on the screen. 8-way Navigation Key The left and right keys on the outer ring enable you to move between tabs or to move to the beginning or end of a line of text. The up and down arrows scroll one page at a time (page up/down), or move to the beginning and end of the message. The inner ring enables you to move left and right or up and down within a within a screen or within lines of text. 錯誤! 尚未定義樣式。 Options Displays the Options menu for the current screen, if available. Main Menu Displays the main menu options. 15 OGO 2 User Manual Shortcut Keys Located above the keyboard, the following shortcut keys make it easy to navigate between the most commonly used features on your Ogo device. Table 5: Shortcut Keys Key Name Function Power On/Off Powers your Ogo on and off. Ogo Lists all recent unread e-mail and SMS/text messages, open IM chat sessions, and drafts of messages not yet sent. Instant Messaging Displays the IM screen, enabling you to manage your ICQ and/or Windows Live Messenger contacts, send and receive messages, and more. Mailbox Displays the Mailbox screen, enabling you to view, sort, and send e-mail and SMS messages. Compose Opens a screen where you can write a new e-mail or SMS/ text message. Home Displays a list of the main menu options, enabling you to easily navigate between features. Back Displays the previously viewed screen. Note: The precise arrangement of the keys may vary according to device model. In addition, depending on the model, your Ogo may have either a QWERTY or a QWERTZ keyboard. 16 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Inserting Text Using your Ogo keyboard, you insert standard text, symbols, and emoticons in the various text fields and messages. You can also take advantage of Ogo’s QuickText feature to insert predefined or customized text. For details, see Working with QuickText on page 18. Note: Depending on your region and wireless carrier, you may also able to insert non-English characters, such as accented letters and symbols. For details, see Using the Foreign Character Palette on page 19. Using Text Insertion Keys Similar to the functionality of a standard keyboard, the text insertion keys enable you to compose IM, e-mail and SMS messages. Table 6: Text Insertion Keys Key ALT Name Function Letter keys Inserts letters, numbers and other symbols. Alternate Inserts the symbol located above the letter on the key. For example, hold down the ALT key and press the B key to insert the number 7. Note: Holding down ALT and pressing the spacebar displays the symbol palette, enabling you to include special characters when composing outgoing messages. CAP 錯誤! 尚未定義樣式。 Capitalize Inserts a capital letter. For example, hold down the CAP key and press D to insert the capital letter D. Emoticon Displays the emoticon palette, enabling you to include emoticons in your instant messages. 17 OGO 2 User Manual Key Name Space bar/Symbol Function When pressed alone, inserts a space in text. When pressed in conjunction with ALT, displays the Symbol palette, enabling you to include special characters when composing outgoing messages. Clear Enables you to delete the last character inserted in a text field (press once for each character), all of the text in a field (press and hold), or a selected message in a list. Note: The precise arrangement of the keys varies according to device model. Working with QuickText QuickText messages are a fun and fast way to communicate at the touch of a key. Use your Ogo’s predefined messages or customize messages with your favorite phrases. There are eight predefined QuickText messages available for quick insertion into any IM, e-mail, or SMS/text message field: What's your number? Where should we meet? When should we meet? Talk to you soon Where are you? I'm running late No problem 10 Call me when you get this Note: QuickText messages can have a maximum of 60 characters, including spaces. 18 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Inserting QuickText You can insert QuickText into an instant message, e-mail message, or SMS/text message. ► To insert QuickText: While composing your message, press displayed. . The Options menu is Press 1, or select 1. Insert QuickText and press Enter. The Insert QuickText screen is displayed, listing the available QuickText messages. Select the QuickText message you want to insert and press Enter (or press the number of QuickText message item). The Insert QuickText screen closes and the QuickText is inserted into the message field. Customizing QuickText You can edit the QuickText options to include your favorite phrases making them available for use in your e-mail and SMS/text messages. ► To edit QuickText: While composing a message, press displayed. . The Options menu is Press 2, or select 2. Edit QuickText and press Enter. The Choose QuickText to Edit screen is displayed, listing the available QuickText messages. Select the QuickText message you want to edit and press Enter (or press the number of QuickText message item). The Edit QuickText screen is displayed. Edit the text. Select Save and press Enter. The modified QuickText is saved and ready for insertion into your message(s). Using the Foreign Character Palette Depending on your region and your wireless carrier, you may be able to insert non-English characters, such as accented letters and symbols, into your messages using the Extended Character palette. If the use of foreign characters is supported, extended characters may be used in the following fields: 錯誤! 尚未定義樣式。 19 OGO 2 User Manual Find MSN display name Templates Message body Address and subject Nickname, First, Last, Company, Postal Address, Notes in Contact List entries Instant messages Mailbox name, Display name ► To enter an extended character in a field: When the cursor is located in one of the fields listed above, access the Extended Character palette by long-pressing one of the keys associated with the letter you want to type: E, Y, U, I, O, A, S, D, C and N; the Extended Character palette is displayed. Scroll through and select the required character and press Enter to close the palette and insert the selected character into your message. Table 7: Extended Character Options Key 20 English Non-English aäæåàáâã (A Ä Æ Å À Á Â Ã) aäæåàáâã (A Ä Æ Å À Á Â Ã) c ç (C Ç) c ç (C Ç) d ð (D Ð) d ð (D Ð) e è é ê ë (E È É Ê Ë) e è é ê ë (E È É Ê Ë) g (G) ğ (Ğ) i ì í î ï (I Ì Í Î Ï) i ì í î ï ı (I Ì Í Î Ï İ) n ñ (N Ñ) n ñ (N Ñ) oöøòóôõ (O Ö Ø Ó Ò Ô Õ) oöøòóôõ (O Ö Ø Ó Ò Ô Õ) s ß (S ß) s ß ş (S ß Ş) u ù ú û ü (U Ù Ú Û Ü) u ù ú û ü (U Ù Ú Û Ü) y ý þ (Y Ý Þ) y ý þ (Y Ý Þ) 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Checking for Messages and Open Chats With Ogo, you can check for new messages of all types and open chats in one easy step – simply press display the Ogo screen. on the keyboard to Your Ogo screen lists all recent unread e-mail and SMS/text messages, open IM chat sessions, and drafts of messages not yet sent. 錯誤! 尚未定義樣式。 21 OGO 2 User Manual Instant Messaging You can use your Ogo to chat with friends and colleagues using the Windows Live Messenger and/or ICQ messaging services. Note: The availability of IM services on your Ogo device depends on the package offered by your wireless carrier/operator, and may be limited to one service or another, or neither. You can use only one Windows Live Messenger account and one ICQ account at any given time. Using the Instant Messaging Wizard to Set Up Your Account IM accounts are set up using the Instant Messaging Wizard. You need to have your IM account details (username and password) ready in order to set up an IM account on the device. Note: If you are using your Ogo for the first time, the Instant Messaging Wizard is displayed immediately after you select your language. ► To access the Instant Messaging Wizard: 22 Select in the Home screen or Main Menu and press Enter. The Settings screen is displayed. Select the IM tab. Scroll down to select Add and press Enter. The Instant Messaging Wizard screen is displayed. Select Next and press Enter. You are prompted to select the IM provider. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Note: You can use only one Windows Live Messenger account and one ICQ account at any given time. If you have already set up a Windows Live Messenger account, then you are given the option of setting up an ICQ account only. If you have already set up an ICQ account, then you are given the option of setting up a Windows Live Messenger account only. Select the IM Provider (Windows Live Messenger or ICQ) and press Enter. Select Next and press Enter. Follow the on-screen instructions for the selected IM Provider, as described in Setting Up Your Windows Live Messenger Account and Setting Up Your ICQ IM Account, respectively. Setting Up Your Windows Live Messenger Account Although you may have more than one valid e-mail account, only one Windows Live Messenger account can be active on the device at any given time. You can set up an MSN, Hotmail, Yahoo, or G-mail account for use with Windows Live Messenger. You need to set up your e-mail account with the relevant service prior to attempting to configure Windows Live Messenger on your Ogo, and have your account details (username and password) on hand in order to set up your account on the device. ► To set up a Windows Live Messenger account: If you select Windows Live Messenger as the IM Provider in the Instant Messaging Wizard, the Windows Live Terms of Use screen is displayed. Read the terms of use. Then select Accept to indicate your agreement and press Enter. Note: If you do not agree to the terms, select Decline and press Enter. Select Next and press Enter. The Windows Live Messenger Setup screen is displayed. In the E-mail Address field, insert the username associated with the e-mail address to be set up on Windows Live Messenger. If you are using a hotmail or MSN e-mail address, do not include the domain name. If you are using another e-mail address, such as a Yahoo email account, then you must include the domain name in the email address. Note: For details on how to insert text, see Inserting Text on page 17. 錯誤! 尚未定義樣式。 23 OGO 2 User Manual Select the required domain (@hotmail.com; @msn.com; or Other) and press Enter. In the Password field, insert your password. Note: The letters are displayed one at a time as you insert them; upon inserting the next letter the previously entered one turns into an asterisk. When you attempt to move to the next field, you are prompted to confirm that you want to store your password on the device. Select Yes to save the password on the device or select No if you prefer to enter the password each time you sign in. Then, press Enter. Note: If you select Yes, a security warning is displayed advising you to go to the .NET password website and change your password in the event that your device is lost or stolen. Press Enter continue. To automatically sign in whenever your Ogo is turned on, select Sign in when powered on and press Enter. Select Next and press Enter. The IM account setup process is complete. 10 To set up an IM account with the alternate service, select Set up another account and press Enter. 11 To close the wizard, select Finish IM Wizard. Setting Up Your ICQ IM Account You need to set up your ICQ account in advance and have your account details (username and password) on hand to set up your account on the device. ► To set up your ICQ IM account: If you select ICQ as the IM Provider in the Instant Messaging Wizard, the ICQ Setup screen is displayed. In the ICQ# field, insert your ICQ#. Note: For details on how to insert text, see Inserting Text on page 17. In the Password field, insert your password. Note: The letters are displayed one at a time as you insert them; upon inserting the next letter the previously entered one turns into an asterisk. 24 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 When you attempt to move to the next field, you are prompted to confirm that you want to store your password on the device. Select Yes to save the password on the device or select No if you prefer to enter the password each time you sign in. Then, press Enter. Note: If you select Yes, a security warning is displayed advising you to go to the change your password in the event that your device is lost or stolen. Press Enter continue. To automatically sign in whenever your Ogo is turned on, select Connect when powered on and press Enter. Select Next and press Enter. The IM account setup process is complete. If you have not set up an account with the alternate service, you are prompted to do so. Note: If you have already set up both services, the Account Summary screen is displayed. To set up an IM account with the alternate service (if not already done), select Setup another account and press Enter, OR To close the wizard, select Finish IM Wizard. The Account Summary screen is displayed, listing the services that are to be accessed from your device. Note: To remove a service, select the service and press Enter to clear the checkbox. Press Next to continue. Your device automatically signs you into the configured service(s). If you complete the wizard the first item you use the device, you are prompted to set up your e-mail account(s). For details, see Using the E-Mail Wizard to Set Up Your Account on page 34. If you access the wizard from the Settings screen, the wizard completes and the IM tab of the Settings screen is displayed. 錯誤! 尚未定義樣式。 25 OGO 2 User Manual Working with the IM Screen While viewing the IM screen, the following options are available from the Options menu: Change My Status Send Message Add a User/Contact Delete User/Contact Block User/Contact User’s Details/Contact Info Assign Alerticon Disconnect/Sign Out My Profile (Windows Live Messenger only) ► To access the Instant Messaging screen: Select in the Home screen or Main Menu and press Enter. The IM screen is displayed. Figure 11: IM Screen If you have set up both IM providers, then two tabs are displayed – one tab for ICQ and a second tab for Windows Live Messenger. Your IM status for each of the configured services is displayed in the status bar. 26 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Select the tab for the IM service that you want to work with. When a tab is selected, the username appears on the tab, and the Contact List displays your existing contacts. Note: If no contacts have been defined, a message is displayed indicating that the Contact List is empty. To add a user, press Enter. For details, see Adding an IM Contact on page 30. Status icons are used to indicate the messaging status of your contacts. The icons vary according to the service selected. IM Status Icons Status icons indicate the status of other IM users. The specific icons vary according to the IM service in use (Windows Live Messenger or ICQ). Table 8: Windows Live Messenger Icons Icon Status Online Busy/On the Phone Away/Out to Lunch/Be Right Back Online Blocked Offline Offline Blocked Table 9: ICQ Status Icons Icon Status Online Busy Away Offline 錯誤! 尚未定義樣式。 27 OGO 2 User Manual Changing Your Status You can define the way in which your status is displayed to others in their contact lists. ► To change your status: Open the IM screen and select the tab for the IM service (ICQ or Windows Live Messenger). Press Press 1 on the keyboard or select 1. Change Status from the dropdown menu, and press Enter. A dropdown menu of available statuses is displayed. Select the status that you want to be displayed and press Enter. Your status is updated accordingly, and is reflected on the corresponding icon in the status bar. . The Options menu is displayed. ► To change the IM status that is displayed when your Ogo is closed: Select in the Home screen or Main Menu and press Enter. The Settings screen is displayed. Select the IM tab. Scroll down to select When closed and press Enter. A dropdown menu is displayed. Select either No change or Away and press Enter. The status displayed to your contacts when the Ogo is closed is set accordingly. Sending an Instant Message As soon as you have set up your IM account on the Ogo, you can exchange messages with your contacts. ► To send an instant message: 28 Open the IM screen and select the tab for the IM service (ICQ or Windows Live Messenger). Select the contact to whom you want to send a message. Press Press 2 on the keyboard or select 2. Send IM, and press Enter. The Chat screen is displayed. . The Options menu is displayed. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Insert your message text and press Enter. Your message is sent to the selected contact, and is displayed in the top half of the screen. Adding Emoticons to Your Instant Messages You can use a variety of emoticons to personalize your chat messages. ► To add an emoticon to an instant message: Press the Emoticon key on the keyboard. An emoticon palette is displayed. Scroll through the palette to select the desired emoticon and press Enter. The emoticon is added to your message text. Note: The available emoticons vary according to the IM service provider. Receiving an Instant Message When an instant message arrives on your Ogo and the Chat screen is not open, a dropdown message appears briefly at the top of the screen. If an alerticon has been assigned to the contact, the alerticon animation is played. During an ongoing chat, an incoming message from the same contact is automatically added to the dialog in the top half of the screen. ► To view an instant message: When you open the IM screen, an animation appears if you have unread messages from a contact(s). Select the contact and press Enter. The Chat screen is displayed, with the sender’s message in the top half of the screen. ► To view an instant message upon receiving an alert: While the dropdown message is displayed, press Enter. The IM screen is displayed with the sender selected by default. In addition, an animation indicates that you have an unread message from this contact. Press Enter. The Chat screen is displayed, with the sender’s message in the top half of the screen. 錯誤! 尚未定義樣式。 29 OGO 2 User Manual Closing an IM Chat Session You can close an open IM chat session in either of the following ways: In the Chat screen for the open session, select 8. Close Chat Options from the Options menu. In the Ogo screen, select the IM chat session and press CLR on the keyboard. Managing Your IM Contacts You can add, delete and block specific contacts in your contact list from your Ogo. In addition, you can assign alerticons to specific contacts so that an animated alert pops up whenever they send you messages. Note: Changes made to your IM Contact List are implemented regardless of the device used to access the IM service, and not only when using the Ogo. Adding an IM Contact It’s easy to add new contacts to your IM Contact List(s) using the Ogo. ► To add an IM contact: In the IM screen, press . The Options menu is displayed. Press 3, or select 3. Add a User and press Enter. The Add a User screen is displayed. If you are adding an ICQ contact, insert the user’s ICQ#, OR, If you are adding a Windows Live Messenger contact, insert the user’s e-mail address. Select Add a User and press Enter. The contact is added to your Contact List. Viewing Contact Information You can view the contact profile details of your IM contacts. ► To view contact information: 30 In the IM screen, select the contact. Press . The Options menu is displayed. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Press 6, or select 6. Contact Info and press Enter. The Contact Info screen is displayed. The specific details displayed depend on the selected IM service. Select Yes and press Enter. The contact’s status is updated in the IM Contact List; the contact is blocked and is unable to send you instant messages. Assigning an Alerticon to an IM Contact Ogo’s animated Alerticons make it easy for you to identify when some important to you has sent you a message. Simply assign an Alerticon to a contact and an attractive animation pops up on your Ogo screen whenever that contact sends you a message. ► To assign an alerticon: Open the IM screen and select the tab for the IM service (ICQ or Windows Live Messenger). Select the contact. Press Press 7, or select 7. Contact Info and press Enter. The Contact Info screen is displayed, with the Alerticon field selected by default. Press Enter. The Assign Alerticon screen is displayed. Scroll and select the desired Alerticon. . The Options menu is displayed. Note: When an Alerticon is selected, the animation is played. You can scroll through and view the various animations before making your selection. Press Enter. Select Done and press Enter. The selected Alerticon is assigned to the contact, and is displayed on the device each time a message is received from the contact. Blocking/Unblocking an IM Contact You want to stay signed in to the IM service, but you don’t really wanted to be bother with messages from just anyone. You can block communications from specific contacts – and then unblock them whenever you want. ► To block an IM contact: In the IM screen, select the contact to be blocked. 錯誤! 尚未定義樣式。 31 OGO 2 User Manual Press . The Options menu is displayed. Press 5, or select 5. Block User and press Enter. The Block User screen is displayed, prompting you to confirm that you want to block the contact. Select Yes and press Enter. The contact’s status is updated in the IM Contact List; the contact is blocked and is unable to send you instant messages. ► To unblock an IM contact: In the IM screen, select the blocked contact. Press Press 5, or select 5. Unblock User and press Enter. The Unblock User screen is displayed, prompting you to confirm that you want to unblock the contact. Select Yes and press Enter. The contact’s status is updated in the IM Contact List; the contact is unblocked. . The Options menu is displayed. Deleting an IM Contact If you no longer interested in using the IM service to communicate with certain contacts, you can remove them from your IM Contact List. ► To delete an IM contact: 32 In the IM screen, select the contact to be deleted. Press Press 4, or select 4. Delete User and press Enter. The Delete User screen is displayed, prompting you to confirm that you want to delete the contact. Select Delete and press Enter. The contact is deleted from your IM Contact List. . The Options menu is displayed. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Signing In If you have not configured your Ogo to automatically sign you in whenever it is turned on, you can manually sign in when it suits you. Or you can sign in again, if you have signed out for any reason. ► To sign in to the IM: Open the IM screen and select the tab for the IM service (ICQ or Windows Live Messenger). You are prompted to sign in. Press Enter. A Sign In screen is displayed, listing your default sign in details. To sign in using the specified details, select OK and press Enter. Note: To sign in as a different user, insert the required details before selecting OK and pressing Enter. You are signed into the IM service. Signing Out If you do not want to be interrupted by incoming messages, you can sign out of the IM service. ► To sign out: In the IM screen, press Press 8, or select 8. Sign Out/Disconnect and press Enter. You are disconnected from the IM service. 錯誤! 尚未定義樣式。 . The Options menu is displayed. 33 OGO 2 User Manual E-Mail and SMS/Text Messaging Ogo lets you manage messages from MSExchange, POP3, IMAP4, and MSN Hotmail accounts easily and efficiently, whether you're sitting in a restaurant, riding the bus, or relaxing on the beach. And Ogo's PUSH e-mail feature means you get e-mail as soon as it hits your inbox, so there's no need to wait. Note: If you have an Exchange Server (POP3 or IMAP4) email account then you can receive and view e-mail attachments on your Ogo, including Word documents, Excel spreadsheets, PDFs, graphic files, and more. Setting Up Your E-Mail Accounts Your Ogo device supports the ability to send/receive e-mail from up to five existing e-mail account(s). If you have an Exchange Server (POP3 or IMAP4) email account then you can receive and view e-mail attachments on your Ogo. Note: The ability to manage multiple e-mail accounts on the Ogo depends on your service provider. Using the E-Mail Wizard to Set Up Your Account E-mail accounts are set up using the Instant Messaging Wizard. Depending on your wireless carrier/operator, you may be able to set up multiple e-mail accounts for different e-mail providers (for example, Hotmail, Gmail or Yahoo). You need to have your e-mail account details (e-mail address and password) ready in order to set up an e-mail account on the device. ► To access the E-mail Wizard: 34 Select in the Home screen or Main Menu and press Enter. The Settings screen is displayed. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Select the E-mail tab. Scroll down to select Add and press Enter. The E-mail Wizard screen is displayed. Select Next and press Enter. You are prompted to select the e-mail provider. Note: If you have already set up an account on Ogo for an e-mail provider, that provider is no longer available for selection. Select the e-mail provider (Windows Live Mail, Gmail or Custom email provider) and press Enter. The Mail Setup screen is displayed. Follow the on-screen instructions for the selected IM Provider, as described in Setting Up Your Windows Live Messenger Account and Setting Up Your Gmail or Custom Email Account, respectively. Setting Up Your Windows Live Mail Account If you have a Windows Live Mail account, you can configure your Ogo to send and receive e-mail for those accounts (subject to the conditions imposed by your wireless operator). ► To set up your Windows Live Mail account: If you select Windows Live Mail as the e-mail provider in the E-mail Wizard, the Windows Live Mail Setup screen is displayed. If you have already configured Windows Live Messenger, your configured user details are displayed by default. In the E-mail Address field, insert the e-mail address to be set up on Windows Live Mail. If you are using a hotmail or MSN e-mail address, do not include the domain name. If you are using another e-mail address, such as a Yahoo e-mail, then you must include the domain name in the e-mail address. Note: If you have already configured Windows Live Messenger, your configured user details are displayed by default. Select the required domain (@hotmail.com; @msn.com; or Other) and press Enter. In the Password field, insert your password. Note: The letters are displayed one at a time as you insert them; upon inserting the next letter the previously entered one turns into an asterisk. Select Next and press Enter. You are prompted to enter your account information. 錯誤! 尚未定義樣式。 35 OGO 2 User Manual Insert the requested information in the designated fields. Set how often you want the Ogo to check for new mail as follows: • Select Check interval and press Enter. A drop-down menu is displayed. • Scroll and select the desired time interval (OFF, 10m, 30m, 1h, 2h) and press Enter. Press Enter. You are prompted to set up another account (optional) or to finish the wizard. Select Finish E-mail Wizard and press Enter. Select Next and press Enter. The Account Summary screen lists the e-mail service(s) configured on your Ogo. Note: To remove an e-mail service, clear its checkbox. 10 Select Next and press Enter. Your e-mail account data is updated. Setting Up Your Gmail or Custom Email Account If you have a gmail or other e-mail account(s), you can configure your Ogo to send and receive email for those accounts (subject to the conditions imposed by your wireless operator). If you are setting up a Gmail account, you will need to enable your account’s POP Download option in order to access Gmail from the device. To do so, select Enabled POP for all mail in your Gmail Account Settings (in the Forwarding and POP section). If you are setting up a custom account, you will need to have the complete account information ready, including the username, E-mail protocol, incoming server, outgoing server, and so on. ► To set up your gmail or custom e-mail account: If you select Gmail or Custom e-mail provider as the e-mail provider in the E-mail Wizard, you are prompted to enter your login information. In the E-mail Address field, insert your e-mail address. (If you are setting up a custom e-mail account, include the domain name.) In the Password field, insert your password. Note: The letters are displayed one at a time as you insert them; upon inserting the next letter the previously entered one turns into an asterisk. 36 Select Next and press Enter. You are prompted to enter your account information. Insert the requested information in the designated fields. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Set how often you want the Ogo to check for new mail as follows: • Select Check interval and press Enter. A drop-down menu is displayed. • Scroll and select the desired time interval (OFF, 10m, 30m, 1h, 2h) and press Enter. Press Enter. You are prompted to set up another account (optional) or to finish the wizard. Select Finish E-mail Wizard and press Enter. Select Next and press Enter. The Account Summary screen lists the e-mail service(s) configured on your Ogo. Note: To remove an e-mail service, clear its checkbox. 10 Select Next and press Enter. Your e-mail account data is updated. Accessing the Mailbox The Ogo Mailbox is your window to managing your e-mail and SMS/text messages. ► To access the Mailbox screen: Press , or select in the Home screen or Main Menu and press Enter. The Mailbox screen is displayed. Figure 12: Mailbox Screen Typically, the Mailbox screen includes the following tabs: • Inbox • SMS • E-mail account(s) (if set up on the device) • Find 錯誤! 尚未定義樣式。 37 OGO 2 User Manual • Outgoing Viewing Your Message Lists The Inbox tab shows a combined list of all your e-mail and SMS/text messages. The most recently received messages appear at the top of the list. Alternatively, you can view only the incoming messages of a specific type or for a specific e-mail address in the corresponding tab. For example, to view only SMS messages, select the SMS tab. The following details appear for each message: An icon, indicating the type and status of the message (see Table 10) The name of the sender The subject of the message (for e-mail messages) or the beginning of the message, time and date (for SMS messages) Table 10: Mailbox Icons Icon Message Type/Status E-mail – Unread E-mail – Read E-mail – Sent E-mail – Sent (failure) E-mail – Unread partial E-mail – Read partial SMS/text – Unread SMS/text – Read SMS/text – Sent Draft message While viewing a message a Mailbox tab, the following options are available from the Options menu: 38 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Mark as Unread Reply Reply to All Forward Delete Sort by Sender Delete All Send/Receive Composing a Message You can compose and send SMS and/or e-mail messages. ► To compose an SMS message: In the SMS tab of the Compose window, press menu is displayed. . The Options Press 1, or select 1. New message and press Enter. Insert the recipient’s mobile number in the To field. Scroll down and insert the message text. Note: A counter at the bottom of the screen indicates the remaining number of characters that can be inserted into the message. An SMS message cannot exceed 160 characters. Select Send and press Enter. ► To compose an e-mail message: In the E-mail tab of the Compose window, press menu is displayed. . The Options Press 1, or select 1. New message and press Enter. A message form is displayed, with the From details automatically inserted. Insert the recipient’s e-mail address, the message subject, and message text in the designated fields. Select Send and press Enter. Note: If you attempt to leave the Compose screen without sending the message, you are prompted to save it as a draft message. Select Yes if you want to save the draft. 錯誤! 尚未定義樣式。 39 OGO 2 User Manual Working with Messages You can open messages from the Ogo List or from the various tabs of the Mailbox screen. While viewing an open message, the following options are available from the Options menu: Add Sender to Contacts Reply Reply to All Forward Delete Delete Locally Address Clipboard Opening a Message You can open and view your incoming messages on your Ogo. ► To open a message: Select the message in the Ogo screen or the Mailbox screen and press Enter. The message opens, including details regarding the message sender, destination e-mail address or mobile number, subject and text, as applicable. When applicable, attachments are listed below the message text. Viewing an Attachment If you have an Exchange Server (POP3 or IMAP4) email account, you can receive and view e-mail attachments on your Ogo, including Word documents, Excel spreadsheets, PDFs, graphic files (.jpg, .bmp. .gif), and more. Note: Attachments are not supported for Windows Live Mail. ► To view an attachment: 40 Select the attachment in the Attachments list and press Enter. A pop-up menu is displayed. To view a summary of the attachment properties (filename, type, size and status), select Details. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 OR To view the attachment content, select View text. A pop-up message is displayed while the attachment is downloaded. The attachment is displayed on screen as unformatted text. Note: If the attachment is of a non-supported file type, an error message is displayed. Forwarding a Message Got a message that you think will interest someone else? Forward it to them. ► To forward a message: In the opened message screen (or in the Mailbox screen with the message selected), press . The Options menu is displayed. Press 4, or select 4. Forward and press Enter. The Compose screen is displayed, with the original message listed in the message area. Insert the details of the intended recipient in the To field. (Optional) Add to or edit the message text if desired. Select Send and press Enter. The Send Message? screen is displayed. Select Yes and press Enter. A brief animation is displayed, indicating that the message is being sent. Note: If one or more recipient/sender is not in your Ogo Contact List, you are prompted to save their details at this time. To do so, select Save and press Enter to display the Address Clipboard screen. For details on saving contacts from the Address Clipboard, see Creating a Contact from the Clipboard on page 57. Replying to a Message You can reply to your incoming messages. ► To reply to a message: In the opened message screen (or in the Mailbox screen with the message selected), press . The Options menu is displayed. To reply to the sender only, press 2, or select 2. Reply and press Enter. OR, 錯誤! 尚未定義樣式。 41 OGO 2 User Manual To reply to the sender and all other recipients, press 3, or select 3. Reply to All and press Enter. The Compose screen is displayed, with the original message listed in the message area. (Optional) Add to or edit the message text if desired. Select Send and press Enter. The Send Message? screen is displayed. Select Yes and press Enter. A brief animation is displayed, indicating that the message is being sent. Deleting a Message Messages that are no longer needed can be deleted from your Mailbox. You can opt to delete them locally (on the Ogo device only) or from the mailbox maintained by the e-mail service provider. ► To delete an open message: In the opened message screen, press displayed. . The Options menu is To delete the message from your Ogo device without removing it from the mailbox maintained by the e-mail service provider, press 6, or select 6. Delete Locally and press Enter. OR To delete the message entirely, press 5, or select 5. Delete and press Enter. The message is deleted according to your selection. ► To delete a message from the Mailbox screen: In the Mailbox screen, select the message and press Options menu is displayed. . The To delete the message, press 5, or select 5. Delete and press Enter. The message is deleted. ► To delete all messages in the selected tab of the Mailbox screen: In the Mailbox screen, press . The Options menu is displayed. To delete the message, press 7, or select 5. Delete All and press Enter. All of the messages in the selected messages list are deleted. 42 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Finding a Message The Find tab lets you search for a particular message based on a text string contained anywhere within the message, including the address, subject or message content fields. ► To find a message: In the Mailbox screen, scroll and select the Find tab. Insert the search criteria in the empty field. (The search criteria can be a partial word, whole word, phrases, numbers, and so on.) You can search for up to 32 characters (including symbols). Select Find and press Enter. The search results are listed in the screen. Note: To view the content of a message that appears in the results, select the message and press Enter. To sort the search results, press and select Sort by Recipient/Sender from the Options menu. To clear the search results, press the Options menu. and select Clear Results from Checking for New Messages Typically, your Ogo checks for new mail at set time intervals, which are configured when you set up your e-mail accounts. In addition, you can prompt your Ogo to send/receive for mail at any time. ► To send/receive mail: In the Mailbox screen, press . The Options menu is displayed. To send/receive the message, press 8, or select 8. Send/Receive and press Enter. The messages lists in the Mailbox screen are updated accordingly. Viewing Your Sent Messages By default, all of the e-mail and SMS/text messages you have sent from your Ogo are listed in the Outgoing tab of the Mailbox screen. You can review your sent messages, forward them to additional recipients, or delete them if they are no longer required. 錯誤! 尚未定義樣式。 43 OGO 2 User Manual For details, see Forwarding a Message on page 41 or Deleting a Message on page 42. 44 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Using Your Ogo Phone As brilliant as Ogo is at text based messaging, sometimes you just need to talk to someone. The Phone screen enables you to make and answer phone calls, as well as view phone numbers previously dialed, and the calls received and calls missed lists. Dial/Answer and Hang Up For added convenience, your Ogo features Dial/Answer (green) and Hang Up (red) buttons, which are located along the bottom edge of the device. Figure 13: Dial and Hang Up Buttons So which way is up? For best reception, hold your Ogo device with the Logo side facing you and the Dial/Hang Up buttons near the top. Too loud? Too quiet? You can adjust the volume on your Ogo by simply pressing the + and – buttons on the edge of the device. Or to mute the device, hold down the – button for a few seconds to turn off the sound entirely. Figure 14: Volume Control Buttons Dialing a Call You can place an outgoing call by manually inserting a phone number in the Dial tab of the Phone screen or by inserting the phone number of a contact from your Ogo Contact List. 錯誤! 尚未定義樣式。 45 OGO 2 User Manual You can also make an outgoing call while an existing conversation is in progress. For details, see Making another Call While Talking on the Phone on page 48. ► To dial a phone number: Press on the keyboard and then press Enter or select in the Home screen and press Enter. By default, the Dial tab of the Phone screen is displayed. Figure 15: Phone Screen Insert the phone number to be dialed. Select Call and press Enter, or press the green button on the bottom edge of your Ogo. Your call is placed. The Ongoing Call screen is displayed. When the call recipient picks up, a timer is displayed that tracks the duration of the ongoing call. Once you have begun the call, feel free to close the device at any time. Your call will not be disconnected. Note: To end the call, press the red button on the edge of your Ogo, or scroll to Hang Up and press Enter. ► To call a contact: 46 Press on the keyboard and then press Enter or select in the Home screen and press Enter. By default, the Dial tab of the Phone screen is displayed. Press Enter again. A pop-up list of your contacts is displayed. Select the contact to be called and press Enter. Your call is placed and the Ongoing Call screen is displayed. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Note: If the selected contact has more than one phone number stored, a symbol is included with the contact name. When you press Enter, a list of the available phone numbers for the contact is displayed; Select the required number and press Enter again. Handling Incoming Calls Whenever your Ogo is powered on, you can receive calls on it – whether or not the cover is open or closed. Answering a Call – Ogo is On, Cover is Closed ► To answer the call (Ogo is on, but closed): When you hear your Ogo ringtone, simply press the green button on the edge of your Ogo, and start talking! Handling an Incoming Call – Cover is Open If you are using your Ogo and a call arrives, the Incoming Call screen prompts you to decide whether you want to accept, reject, or silence the call. If the call is from a number that is listed in your Ogo Contact List, then the caller’s name is displayed. If not, the caller’s phone number is displayed. If the caller has opted to block his caller ID, “Private Number” is displayed. To accept the call, press the green button on the edge or your Ogo, or select Accept and press Enter. Start talking! To reject the call, select Reject and press Enter. The call is disconnected, and is listed in the Received calls tab of the Phone screen. To silence the call, select Silence. The playing of your ringtone stops, without disconnecting the call. If you have voice mail, the call is diverted to your voice mail if you do not pick up. The call is disconnected, and is listed in the Missed calls tab of the Phone screen. 錯誤! 尚未定義樣式。 47 OGO 2 User Manual Handling Multiple Calls You can juggle multiple calls on your Ogo, freely switching between ongoing calls, or joining them into a conference call. Making another Call While Talking on the Phone You can take advantage of the Hold and New Call features to make a new phone call without ending your an existing conversation. ► To make a call while talking on the phone: Press . The Options menu is displayed. Select Hold and press Enter. The existing conversation is put on hold. Press again and select New Call from the Options menu. A Dial screen is displayed. Insert the phone number for the new call and press Enter. The call is dialed. When the call is answered, you can talk while keeping the previous call on hold. Note: Optionally, you can swap between the open calls or combine them into a conference call. Receiving another Call While Talking on the Phone If another party calls you while you are talking on the phone, an Incoming Call screen is displayed. You can choose one of the following options: 48 To accept the new call and immediately place it on hold, select Hold and press Enter. The new call is listed as on Hold in the Call screen. To end the existing call and accept the new call in its place, select Drop and press Enter. To reject the new call, select Reject and press Enter. The call is disconnected, and is listed in the Received calls tab of the Phone screen. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Swapping Calls If you are engaged in two calls simultaneously, talking to one person while the other is on hold, Ogo allows you to "swap" between the calls – placing the active call on hold so that you can talk to the other person. ► To swap calls: Press . The Options menu is displayed. Select Swap and press Enter. The calls are swapped. Joining Calls (Conferencing) If you are engaged in a number of simultaneous calls (two or more), Ogo allows you to join the calls into a conference. ► To join the calls: Press . The Options menu is displayed. Select Join and press Enter. The calls are joined. The number of participants in the conference call is displayed in the Call screen. ► To unjoin the calls: Press . The Options menu is displayed. Select Split and press Enter. The calls are joined. The calls are split. Each call returns to its previous state (active or on hold). Ending a Call It is easy to end a call, simply press the red button on the edge of your Ogo. The call is disconnected. Note: Alternatively, you can select Hang Up in the Call tab and press Enter. Muting/Unmuting a Call Ever need to say something that you don’t want the person on the line to hear, but you aren’t ready to hang up yet? Then, muting the call is the solution for you. Muting a call temporarily disables Ogo’s microphone so that the other party cannot hear you. 錯誤! 尚未定義樣式。 49 OGO 2 User Manual ► To mute/unmute a call: In the Call tab of the ongoing call, select Mute and press Enter. The icon is displayed. ► To mute/unmute a call: To re-enable the microphone, select Unmute and press Enter. The icon disappears. Viewing Your Call Lists The Ogo stores lists of dialed, received and missed calls. Each call list entry includes the following: • The phone number called or the name of the contact if it appears in your Contacts list. • A time stamp of when the call was dialed, or received, or missed. • A call icon, indicating the type of call ► To view a history of recent calls: Select the tab for the type of call list (Dialed, Received, or Missed) in the Phone screen. The corresponding call list is displayed. While viewing a call list, the following options are available from the Options menu for a selected entry: 50 View Details: Displays the Call Details screen, including the phone number and any available caller details. Call This Number: Displays the Call screen, and automatically places a call to the selected number. Use Number: Displays the Call screen, with the number inserted by default. The call is not automatically dialed; press Enter to dial. Compose SMS: Displays the Compose screen, with the number inserted in the To field by default. Add to Contact: Enables you to add the selected number to an existing contact. Create Contact: Enables you to create a new contact with the selected number. Delete Item: Removes a selected entry from the call list. Clear List: Removes all entries from the currently displayed call list. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Call Timers The Timers tab displays the following timers: Last call duration: The duration of the last call, either dialed out or received. Received calls duration: The accumulated duration of all incoming calls listed in the Received calls history. Dialed calls duration: The accumulated duration of all outgoing calls listed in the Dialed calls history. All calls duration: The accumulated duration of all calls, both incoming and outgoing, listed in the Dialed calls and Received calls histories. (This timer cannot be cleared). ► To reset the timers: In the Timers tab, select Clear and press Enter. The Reset Timers screen is displayed. Select Yes and press Enter to confirm that you want to reset the call timers. The Last call duration, Received calls duration and Dialed calls duration timers are reset. Note: The All calls duration timer is not reset. 錯誤! 尚未定義樣式。 51 OGO 2 User Manual Managing Your Ogo Contact List Your Ogo Contact Lists lets you set up, find and manage contact information for people with whom you exchange e-mail and SMS/text messages. While viewing the Contact List, the following options are available from the Options menu for a selected entry: Dial: Displays the Call screen, and automatically places a call to the selected number. Edit Contact Profile: Displays the Contact Profile screen, enabling you to add to or edit the existing contact details. Compose Message: Displays the Compose screen, with the contact’s number inserted in the To field and your number inserted in the From field. New Contact: Enables you to create a new contact in the Contact Profile screen. For details, see Adding Contacts on page 53. Delete Contact: Removes the selected contact from the Contact List. Delete All Contacts: Removes all contacts from the Contact List. ► New Group: Enables you to create a group within your Contact List. For details, see To delete all your contacts: 52 In the Contacts screen, press . The Options menu is displayed. Press 6, or select 6. Delete All Contacts and press Enter. The Delete All Contacts screen is displayed. Select Yes to confirm the deletion and press Enter. The contact is deleted from your Ogo Contact List. Working with Contact Groups on page 54. Export to SIM: Enables you to export your Contact List from the Ogo device memory to the SIM card memory. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Import from SIM: Enables you to import your Contact List from the SIM card memory into the Ogo device memory. Note: Your IM Contact Lists are managed separately. For details, see Managing Your IM Contacts on page 30. ► To access the Contact List: Select in the Home screen or Main Menu and press Enter. The Contacts screen is displayed. Figure 16: Contacts Screen The All tab lists all of your contacts. An additional tab is displayed for each Contact Group (if defined). Adding Contacts You can add contacts to your Ogo Contact List at any time. ► To add a contact: In the Contacts screen, press . The Options menu is displayed. Select New Contact and press Enter. The Contact Profile screen is displayed. Insert the displayed contact details (First Name, Last Name, Mobile Phone, and E-mail Address) as required. Note: You must provide either the first or last name. (Optional) Select Alerticon and press Enter to select an alerticon for the contact. 錯誤! 尚未定義樣式。 53 OGO 2 User Manual (Optional) To add an additional data field: • Select Add Field and press Enter. A menu of optional fields is displayed. Select the desired field name and press Enter to add it to the form. • Insert the relevant information in the new field. • Repeat for additional data fields if required. Select Save & Close and press Enter. The new contact is saved. Deleting Contacts You can remove contacts from your Ogo Contact List. ► To delete a contact: In the Contacts screen, select the contact and press Options menu is displayed. . The Press 5, or select 5. Delete Contact and press Enter. The Delete Contact screen is displayed. Select Yes to confirm the deletion and press Enter. The contact is deleted from your Ogo Contact List. ► To delete all your contacts: In the Contacts screen, press . The Options menu is displayed. Press 6, or select 6. Delete All Contacts and press Enter. The Delete All Contacts screen is displayed. Select Yes to confirm the deletion and press Enter. The contact is deleted from your Ogo Contact List. Working with Contact Groups Organizing your contacts into Contact Groups makes it easy for you to locate that special person’s details when you need them. Similar to a mailing list, it also enables you to send e-mail and SMS/text messages to the entire group at once. Creating a Group You can create contact groups and then add multiple contacts to the groups. Note: The same contact can be added to more than one group. 54 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 ► To create a group: In the Contacts screen, press . The Options menu is displayed. Select New Group. The New Group screen is displayed. Insert name for the group, for example, family. Select OK and press Enter. A tab is added to the Contacts screen for the new group. Adding Contacts to Groups You can assign a contact to one or more Contact groups. The contact will continue to appear in the All tab as well as in the tab(s) for the group(s) to which it has been added. ► To add a contact to a group: In the group’s tab, press . The Options menu is displayed. Press 5, or select 5. Add Contact to Group and press Enter. Your existing contacts are listed in a pop-up menu. Select the contact to be added to the group, and press Enter. The contact is listed in the group’s tab. Sending a Message to a Group You can send a message to an entire group of contacts at the same time, without having to insert the individual address one at a time. ► To send a message to a group: In the group’s tab, press . The Options menu is displayed. Press 4, or select 4. Compose Message to Group and press Enter. The Compose screen is displayed with your details in the From field and the group name in the To field. Insert the subject and message text. Select Send and press Enter. The message is sent to all contacts in the group. Viewing/Editing Contact Profiles You can view existing contact profiles and edit the information they contain. 錯誤! 尚未定義樣式。 55 OGO 2 User Manual ► To view a contact profile: In the Contact screen, select the contact and press Enter. The Contact Profile screen is displayed. Note: For details on defining a contact profile, see Adding Contacts on page 53. Assigning an Alerticon to a Contact Ogo’s animated Alerticons make it easy for you to identify when someone important to you has sent you a message. Simply assign an Alerticon to a contact and an attractive animation pops up on your Ogo screen whenever that contact sends you a message. ► To assign an alerticon: In the Contact Profile screen, select the Alerticon field and press Enter. The Assign Alerticon screen is displayed. Scroll and select the desired Alerticon. Note: When an Alerticon is selected, the animation is played. You can scroll through and view the various animations before making your selection. Press Enter. Select Done and press Enter. The selected Alerticon is assigned to the contact, and is displayed on the device each time a message is received from the contact. Working with the Address Clipboard The Address Clipboard makes it easy to add new contacts to your Ogo Contact list based on the contact data available from the messages in your mailbox. You can also send a message or place a call directly from the clipboard, without adding a new contact. Menu options vary according to type of entry selected in clipboard and may include a combination of the following: • • • • • 56 Add to Contact Create New Contact Compose Call (SMS only) Open (URL only) 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Creating a Contact from the Clipboard You can create a contact directly from within a message using the Address Clipboard. ► To create a new contact from the clipboard: In an open message screen, press displayed. . The Options menu is Press 7, or select 7. Address Clipboard and press Enter. The Address Clipboard is displayed. Select the entry in the displayed list and press Enter. A pop-up menu is displayed. Press 2, or select 2. Create New Contact and press Enter. The Contact Profile screen is displayed. Note: If you select an e-mail address it is inserted automatically. If you select a phone number, you are prompted to select the type of number (Mobile Phone, Main Phone, Home Phone, Work Phone, Fax, or Pager). Add to or edit the displayed contact details (First Name, Last Name, Mobile Phone, and E-mail Address) as required. (Optional) Select Alerticon and press Enter to select an alerticon for the contact. (Optional) To add an additional data field: • Select Add Field and press Enter. A menu of optional fields is displayed. Select the desired field name and press Enter to add it to the form. • Insert the relevant information in the new field. Select Save & Close and press Enter. The new contact is saved. 錯誤! 尚未定義樣式。 57 OGO 2 User Manual Exporting Contacts You can export specific contacts or your entire Ogo Contacts List from the device memory to your SIM card, for example, to make the contact information available on another device. ► To export contacts: In the Contacts screen, press . The Options menu is displayed. Press 8 or select 8. Export to SIM and press Enter. A pop-up menu is displayed. To export the entire Contact List, select 1. All Records and press Enter. OR To export only the selected contact, select 2. This Record and press Enter. The Export Record(s) screen is displayed. Select the checkboxes for the types of phone numbers to be exported. Note: There may be a limit to the number of characters/fields that may be exported. Select Export and press Enter to export the contact data. A popup message indicates the progress of the export process. Importing Contacts You can import contacts from your SIM card to your Ogo Contact List. ► To import contacts: In the Contacts screen, press . The Options menu is displayed. Press 9 or select 9. Import from SIM and press Enter. The Import Record(s) screen is displayed, advising you that both the device card and the SIM card may contain different numbers for the same contact fields. To override the local entries, select Yes and press Enter. Or To manually resolve any potential conflicts, select No and press Enter. 58 The Copying Screen is displayed while the records are copied. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Note: If you opt to manually resolve conflicts and conflicts are detected you are prompted to override the local entry. (Select Yes or No, as required, and press Enter.) Synchronizing Your Contact List If Ogo Sync is installed on your personal computer (desktop or laptop), you can connect your Ogo and manually synchronize your Contact Lists using a USB cable. For details, see your Ogo Sync documentation. Note: The availability of this option, including specific synchronization methods, is subject to the conditions imposed by your cellular operator. 錯誤! 尚未定義樣式。 59 OGO 2 User Manual Working with the Calendar Ogo’s built-in calendar enables you to manage your schedule on the go. And depending on the package offered by your cellular operator, you may be able synchronize your schedule with your calendar on your home PC using a USB cable, Bluetooth connection, or over the air. ► To access the Calendar screen: Select in the Home screen or Main Menu and press Enter. The Calendar screen is displayed. Figure 17: Calendar Screen The Calendar screen includes three tabs: Day: Displays your schedule for a single day. Month: Displays your schedule for a month, with a row for each week in the month. Week: Displays your schedule for a week, with a column for each day of the week. On all three tabs, time blocks for which appointments exist are marked in blue. Depending on your cellular operator, the following options may be available from the Options menu in the Calendar screen: 60 New Appointment: Enables you to add a new appointment 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Open Appointment: Opens the Appointment screen, enabling you to view and edit the appointment details. Delete Appointment: Removes the appointment from your schedule. Summary Mode: Displays a list of the appointments in your calendar. Day View: Changes the view from Summary Mode to Day View. Today: Highlights the current day’s schedule on the screen. Clean-Up: Enables you to delete appointments from your calendar. Synchronize: Enables you to synchronize your calendar with your schedule on your personal computer. The availability of this option, including the specific synchronization methods, is subject to the conditions imposed by your cellular operator. Adding an Appointment Adding appointments to your Ogo calendar makes it easier for you to keep track of your schedule. ► To add an appointment: In the Calendar screen, press Press 1, or select 1. New Appointment and press Enter. The Appointment screen is displayed. Insert the subject and location in the designated fields. If you are scheduling an all day appointment, select All-day event and press Enter. Then insert the dates in the Start and End fields. If you are setting an appointment for part of a day, insert the times and dates in the Start and End fields. (Do not select Add-day event.) Select Show as and press Enter. A pop-up menu of available statuses is displayed. Select the status to be shown on your calendar and press Enter. If you want to be reminded about this appointment, select Reminder and press Enter. A pop-up menu is displayed. Select the how far in advance to be reminded from the list of available values, or select none if you do not want to be reminded about this appointed. 錯誤! 尚未定義樣式。 . The Options menu is displayed. 61 OGO 2 User Manual (Optional) To set the priority of the appointment, select Importance and press Enter. Select the desired priority (Low, Normal or High) from the pop-up menu. The default priority is Normal. (Optional) Insert a note in the Note field. 10 Select Save and press Enter to add the appointment to your calendar. Opening/Editing an Appointment You can view and update the appointment details, for example, if the location or time has been changed. ► To open/edit an appointment: In the Day tab of Calendar screen, select the appointment and press . The Options menu is displayed. Press 2, or select 2. Open Appointment and press Enter. The Appointment screen is displayed. Change the appointment details, as required. For details, see Adding an Appointment on page 61. Select Save and press Enter. The appointment details are updated accordingly. Deleting an Appointment The meeting was cancelled. No problem. You can delete the appointment from your calendar. ► To delete an appointment: In the Day tab of Calendar screen, select the appointment and press 62 . The Options menu is displayed. Press 3, or select 3. Delete Appointment and press Enter. The Delete Appointment screen is displayed. Select Yes to confirm the deletion and press Enter. The appointment is deleted from your schedule. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Deleting Old Appointments You can delete outdated appointments from your calendar. ► To delete old appointments: In the Calendar screen, press . The Options menu is displayed. Select Cleanup and press Enter. A pop-up menu is displayed. Select 2. Delete Old Appointments to delete appointments according to scheduled dates. The Delete Old Appointments screen is displayed. Press Enter and select the time frame to serve as the basis for deleting old appointments (older than 1 week, 2 weeks, and so on). Select OK and press Enter. Appointments that predated the set time frame are deleted from the calendar. Deleting All Appointments You can delete all of your appointments from your calendar. ► To delete all appointments: In the Calendar screen, press . The Options menu is displayed. Select Cleanup and press Enter. A pop-up menu is displayed. Select 1. Delete All Appointments to delete appointments according to their scheduled dates. The Delete Appointments screen is displayed. Select Yes to confirm the deletion and press Enter. All appointments are deleted from your schedule. Receiving Appointment Reminders Appointment reminders are displayed automatically on your screen according to the reminder settings defined when you added the appointment. The Reminder screen includes the information included in the appointment entry (subject, location, and so on). You are prompted to take one of the following actions: 錯誤! 尚未定義樣式。 63 OGO 2 User Manual Remind me in: Enables you to set a time interval after which the Reminder will pop-up again. Dismiss: Closes the Reminder screen for once and for all. Open: Opens the Appointment screen. Snooze: Enables you to temporarily close the Reminder. It will popup again after a configured time interval. Select the desired option and press Enter to continue. Synchronizing Your Calendar If Ogo Sync is installed on your personal computer (desktop or laptop), you can connect your Ogo and manually synchronize your Calendars using a USB cable. For details, see your Ogo Sync documentation. Note: The availability of this option, including specific synchronization methods, is subject to the conditions imposed by your cellular operator. 64 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Viewing the News To stay in touch with your world, Ogo enables you to download RSS news feeds for up to the moment news, information and alerts about the subjects you care about most. The Ogo News screen provides a simple and intuitive interface for receiving updates from web sites featuring standard RSS feed. You can monitor several feeds concurrently. ► To access the News screen: Select in the Home screen or Main Menu and press Enter. The News screen is displayed. Figure 18: News Screen Accessing News Feeds The News screen may contain several tabs, depending on the number of news feeds you have configured. The All tab lists all of the available new items. Each of the additional tabs display a single source or category of news. The number of news items on each tab appears in parenthesis after the tab name. In each news items list, the color of the icon indicates the status of the item: a blue icon indicates an unread news item. A white icon indicates that the item has been read. 錯誤! 尚未定義樣式。 65 OGO 2 User Manual ► To open a news item: Select the news item and press Enter. The item is displayed, including the time, date and supplying feed. To open the news item in a browser, press displayed. Press 1, or select 1. Open in Browser and press Enter. A connection is established with the site, and the news item is opened in the Browser screen. Scroll down to read the news item in its entirety. . The Options menu is ► To view the news item details: Select the news item and press Enter. The item is displayed, including the time, date and supplying feed. To view the news item details, press displayed. Press 3, or select 3. View Details and press Enter. The URL of the news item is displayed in the News Message Details screen. . The Options menu is ► To mark an item as read/unread: Select the news in the news item and press is displayed. . The Options menu Press 2, or select 2. Mark as Unread/Mark as Read and press Enter. The status of the news item changes accordingly. Adding a News Feed Depending on your cellular carrier, you can add news feeds from a preconfigured set of available feeds. ► To add a news feed: 66 In the News Screen, press . The Options menu is displayed. Press 5, or select 5. Add New Feed and press Enter. The Feed Selection screen is displayed. Press Enter. A list of available feeds is displayed. Select the desired feed and press Enter. Select Done and press Enter. A tab is added for the new feed and relevant news items are retrieved automatically. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Surfing the Internet With Ogo, you can browse the web from practically anywhere. ► To open the Web browser: Select in the Home screen or Main Menu and press Enter. The Browser screen is displayed. When the connection is established, a Google search page appears. Figure 19: Browser Screen While browsing the Internet, the following options are available from the Options menu: 1. Go to URL: Enables you to open a specific web page. For details, see . 2. Navigate: Displays a submenu of standard navigation options, including Refresh, Forward, Backward, Stop, and Home page. 3. View: Displays a submenu of standard viewing options, including Zoom in, Zoom out, Reset zoom, and Thumbnail On/Off. 4. Add to Bookmarks: Enables you to create bookmarks to selected web pages. 5. Open: Enables you to view your bookmarks and browsing history. 6. Security: Displays active session and session certificate information, when applicable. 錯誤! 尚未定義樣式。 67 OGO 2 User Manual 7. Properties: Displays your default browsing properties, including page title, address and page size. Typically, these are preconfigured by your cellular carrier and cannot be edited. Searching the Internet Using the Google website, you can use your Ogo to search for information on the Internet. ► To search the Internet: In the Browser screen, insert search criteria in the Google search field. Select Find and press Enter. The first set of search results is displayed. (Optional) Select an entry in the results and press Enter to connect to the corresponding website. Requesting a Specific URL If you know the URL of the webpage you would like to view, you can insert the URL and view it on your Ogo. ► To go to a specific URL: In the Browser screen, press . The Options menu is displayed. Press 1, or select 1. Go to URL and press Enter. The Open new page screen is displayed. A history of previously viewed URLs is displayed. In the http:// field, insert the URL of the page that you want to open and press Enter. OR If you have recently viewed the URL, select it in the history list and press Enter. Your Ogo browser connects to and displays the requested URL. Working with Bookmarks Creating bookmarks makes it easier to return to the webpages that you need the most. And you can make it easier to find your bookmarks by organizing them into personal folders. 68 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Adding a Bookmark You can create a bookmark to any web page that you expect to visit frequently. ► To add a bookmark: While viewing a page in the Browser screen, press menu is displayed. . The Options Press 4, or select 4. Add to Bookmarks and press Enter. The Add to Bookmarks screen is displayed. The screen name and URL of the currently displayed page are inserted automatically. (Optional) Insert/edit the screen name. Select OK and press Enter. The Bookmarks screen is displayed. To save the bookmark in main directory, press Enter, OR To save the bookmark in an existing folder, select the folder and press Enter. The Add Here prompt is displayed. Press Enter to add the bookmark. Removing a Bookmark You can remove bookmarks to web pages that are no longer of interest to you. ► To remove a bookmark: In the Bookmarks screen, select the bookmark and press pop-up menu is displayed. .A Select Delete from the pop-up menu. The bookmark is deleted from your Bookmarks list. Adding a Folder For easier navigation, you can create folders for your bookmarks. ► To add a folder: In the Bookmarks screen, press Select Create new folder from the pop-up menu. The Enter folder name screen is displayed. Insert the folder name. 錯誤! 尚未定義樣式。 . A pop-up menu is displayed. 69 OGO 2 User Manual Select OK and press Enter. The folder is added in the Bookmarks screen. Opening a Bookmark Selecting a bookmark is a fast and easy way of opening a webpage. ► To open a page using a bookmark: In the Browser screen, press . The Options menu is displayed. Press 5, or select 5. Open > 1. Bookmarks and press Enter. The Bookmarks screen is displayed. Select a bookmark and press Enter to display the corresponding webpage. Viewing Your Browsing History You can view a list of the URLs recently opened on your Ogo. ► To view the history: In the Browser screen, press . The Options menu is displayed. Press 5, or select 5. Open > 2. History and press Enter. The History screen is displayed. The sites accessed are sorted according to day, from the current day backward. You can take the following actions from within the History screen: 70 • To view the sites accessed a specific day, select the day and press Enter. • To sort the sites (by date, by site, by last visited, or by most visited), press Enter and select Sort from the pop-up menu. • To view a list of pages accessed on a specific site, select the URL and press Enter. • To display a specific page, select the page in the list and press Enter. • To delete a selected site/page, press Enter and select Delete from the pop-up menu. • To clear the entire history, press Enter and select Delete all from the pop-up menu. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Ogo Extras The Extras screen provides access to any additional applications available on the device, such as Ogo Blocks, as well as to the contact details for technical support purposes. ► To access the Extras screen: Select in the Home screen or Main Menu and press Enter. The Extras screen is displayed. Figure 20: Extras Screen The Extras screen includes two tabs: Applications: Lists any pre-installed applications available on the device. The range of available applications depends on your cellular operator. Tech Support Info: Lists the contact details for technical support purposes. Playing Ogo Blocks The Blocks game comes pre-installed on your Ogo. In this game, you rotate shapes as they fall so that they fit together with as few spaces between them as possible. 錯誤! 尚未定義樣式。 71 OGO 2 User Manual ► To play Ogo Blocks: In the Application tab of the Extras screen, select Ogo Blocks and press Enter. Use the game control keys to control the movement of the falling blocks. Table 11: Blocks Game Controls Control Key Functionality A, Z, Left (inner ring) Moves a piece to the left L "," Right (inner ring) Moves a piece to the right S, X, K, M, Up (inner ring), Page Up (outer ring) Rotates a piece Space, Down (inner ring), Page Down (outer ring) Drops the piece, or resumes a paused game Pauses or resumes an active game Viewing Technical Support Information The phone number and e-mail address technical support are listed in the Tech Support Info tab of the Extras screen. 72 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Setting Your Preferences You can configure various settings for your Ogo, including the default methods for handling calls, IM, and e-mail messages on the device. Your preferences are defined in the following tabs of the Settings screen: Phone: Enables you to configure settings related to your Ogo phone functionality. For details, see Setting Your Phone Preferences on page 74. IM: Enables you to configure your IM accounts settings. For details, see Setting Your IM Preferences on page 77. E-mail: Enables you to configure your e-mail account and mailbox settings. For details, see Setting Your E-mail Preferences on page 78. Browser: Enables you to configure the display of Internet content on your Ogo. For details, see Setting Your Browser Preferences on page 80. Sync: Enables you to configure the ways in which data on your Ogo can be synchronized with other devices. For details, see Setting Synchronization Preferences on page 82. Device: Enables you to customize the look of your Ogo screen and configure the way in which alerts are displayed. For details, see Setting Device Preferences on page 82. Calendar: Enables you to configure the display and handling your Calendar. For details, see Setting Your Calendar Preferences on page 85. Sounds: Enables you to configure the sounds made by your Ogo in various situations. For details, see Setting Your Sounds Preferences on page 86 Time & Date: Enables you to configure the time and date settings on your Ogo. For details, see Setting the Time and Date on page 88. Network: Enables you to view your network settings. For details, see Setting Your Network Preferences on page 89. System: Enables you to view your Ogo’s system capacities and identifying characteristics. For details, see Viewing Your System on page 90. 錯誤! 尚未定義樣式。 73 OGO 2 User Manual ► To access the Settings screen: Select in the Home screen or Main Menu and press Enter. The Settings screen is displayed. Figure 21: Settings Screen Setting Your Phone Preferences The settings configured in the Phone tab determine how your Ogo responds to various calling conditions. ► To set your phone preferences: 74 In the Settings screen, select the Phone tab. Select and edit one or more of the Phone settings, as required. The Phone settings are described in Table 12. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Table 12: Phone Settings Option Description Call forwarding The following call forwarding options may be configured to Enable or Disable: • Forward all calls: Ogo re-routes all incoming calls to another pre-determined number. • Forward if busy: Ogo re-routes incoming calls to another pre-determined number if you are engaged in an active phone call. • Forward if not answered: Ogo re-routes an incoming call to another pre-determined number if you do not answer the call. • Forward if not reachable: Ogo re-routes an incoming call to another pre-determined number if the network cannot locate your Ogo to deliver the call. • Cancel all: Activate this option to disable all of the Forward options that have been enabled. To access the settings, select Configure and press Enter to display the Call Forwarding screen. Select Configure for each of the Call forwarding options and set the options to Enable or Disable. (Press Query if you want to view the current setting). Select Done and press Enter. Voice mailbox number The phone number used to retrieve your voicemail. (This number is assigned by your cellular operator.) Select Edit and press Enter to display the Voice mail number screen. Insert the number, select Done and press Enter. 錯誤! 尚未定義樣式。 75 OGO 2 User Manual Option Description Own number setting This setting defines whether the person you are calling can view your phone number on caller ID-equipped telephones: • On: Your number is displayed. • Off: Your number is not displayed. • Set by Network: The option is set at the discretion of your cellular service carrier (usually On). Press Enter and select your preference from the pop-up menu. Call waiting When enabled, Ogo notifies you of an incoming call while a call is in progress, rather than delivering a busy signal to the new caller. To access the settings, select Configure and press Enter to display the Call waiting screen. Select Enable or Disable, and press Enter. Incoming call alert The ways in which you are alerted to an incoming call, including the type of ringtone, its volume, and/or vibration. To access the settings, select Configure and press Enter to display the Incoming call alert screen. To set the ringtone, select Ringing tone and press enter. Then select the desired ringtone from the pop-up menu. To set the volume, select Ringing volume and adjust the volume by moving the indicator on the slider using the left and right button on the 8-way selection key. To enable the vibrating alert, select Vibrating alert and press Enter. Select Done and press Enter. 76 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Option Description Speed dial You can create shortcuts for dialing your most commonly needed numbers. To access these settings, select Configure and press Enter to display the Speed dial screen. Insert the number(s) for which you want to use the speed dial option. Select Close and press Enter. Setting Your IM Preferences Your IM account settings are configured in the IM tab. ► To set your IM preferences: In the Settings screen, select the IM tab. Select and edit one or more of the IM settings, as required. The IM settings are described in Table 13. Table 13: IM Settings Option Description ICQ The sign in options for the ICQ service, such as ICQ number, password and default presence. Select Open and press Enter to view/edit these settings. Windows Live Messenger The sign in options for the Windows Live Messenger service, such as e-mail address, password and default presence. Select Open and press Enter to view/edit these settings. When closed The action to be taken regarding your IM presence when you close the device (but leave it powered on). Select When close and press Enter. Select the desired action (No change or Away) from the pop-up menu and press Enter. 錯誤! 尚未定義樣式。 77 OGO 2 User Manual Option Description Add IM account Enables you to add an IM account. If you have already set up your IM account(s), this option is disabled. Select Add and press Enter. The Instant Messaging Wizard is displayed. For details, see Using the Instant Messaging Wizard to Set Up Your Account on page 22. Remove IM account Removes an existing IM account. Select Remove and press Enter. The Account Summary screen is displayed. Clear the checkbox for the service to be removed and press Next. Setting Your E-mail Preferences Your e-mail account settings are configured in the E-mail tab. ► To set your e-mail preferences: In the Settings screen, select the E-mail tab. Select and edit one or more of the IM settings, as required. The Email settings are described in Table 14. Table 14: E-mail Settings Option Description Mailbox name The options for the displayed mailbox (for each configured e-mail address). Select Open and press Enter to display the Mailbox Settings screen. For details, see Table 15. Add e-mail account 78 Enables you to add an e-mail account. Select Add and press Enter. The E-mail Wizard is displayed. For details, see Using the E-Mail Wizard to Set Up Your Account on page 34. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Option Description Remove email account Removes an existing e-mail account. Personal signature You can insert a personal signature at the end of your e-mail messages. Select Remove and press Enter. The Account Summary screen is displayed. Clear the checkbox for the e-mail account to be removed and press Next. Select Open and press Enter to display the Personal Signature screen. Select Edit and press Enter to insert/edit your personal signature. Select Save and press Enter. Select the New messages and/or Replied and forwarded checkboxes to determine to which messages your signature is attached. Reply with original Includes the original message when you reply to a message. Brand auto signature Inserts the following message at the end of your e-mail message: These words brought to you by Ogo. Find out more at www.ogo.com. Sent items to keep The number of sent items to be kept in the Outgoing tab. Select Sent items to keep and press Enter. Select the desired number from the pop-up menu and press Enter. Table 15: Mailbox Settings Option Description E-mail address Your e-mail address for the selected Mailbox. Password Your password for the e-mail account. 錯誤! 尚未定義樣式。 79 OGO 2 User Manual Option Description Default account When you compose an e-mail message, it is sent from your default e-mail account. (If you have set up only one e-mail account, this option is selected by default.) Press Enter to select/clear the checkbox as required. Display name The name that appears in the From field of an e-mail account that you send from this account. Server name If you have a custom e-mail account set up, this is the server name for that account. (This field cannot be edited). Configure server Enables you to configure the server for a custom e-mail account. Select Open and press Enter to configure the server settings. Sync back The time period for which to perform synchronization (if synchronization is available). Press Enter and select the time period from the pop-up menu. Check interval The frequency at which Ogo checks for new email messages. Press Enter and select the time interval from the pop-up menu. Setting Your Browser Preferences The settings configured in the Browser tab determine how Internet content is displayed on your Ogo. ► To set your browser preferences: 80 In the Settings screen, select the Browser tab. Edit one or more of the browser settings, as required. The Browser settings are described in Table 16. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Table 16: Browser Settings Option Description Full screen Displays the browser in full screen mode. Rendering mode Displays the mode for presenting content on the Ogo screen. Press Enter and select the rendering mode (Standard, Text wrap, Screen optimized, or Text only) from the pop-up menu. Enable scripts Enables the use of scripts when browsing the Internet. Show images Enables the display of images when browsing the Internet. Enable cookies Enables the use of cookies when browsing the Internet. Encoding Determines the type of encoding used. Press Enter and select the encoding type (AutoSelect, Latin-1; UTF-16, UCS-2, UTF-8, or Latin-2) from the pop-up menu. Private data Enables you to clear the private data stored on the device (cache, cookies, and history). Select Configure and press Enter to display the Private data screen. For each of the options, you can select Clear and press Enter to clear the saved data. Security warning Displays a security warning when you request a potentially unsafe site or action. Connection settings Enables you to configure the Ogo’s connection settings, including the connection type, timeout interval, and proxy properties. Select Configure and press Enter to display the Connection settings screen. Configure the parameters, as required. Then select Done and press Enter. 錯誤! 尚未定義樣式。 81 OGO 2 User Manual Setting Synchronization Preferences The settings configured in the Sync tab determine how the data on your Ogo can be synchronized with your personal computer. It also enables you to see when synchronization was last performed. Note: The availability of this option depends on your cellular operator. If synchronization is not supported, the Sync tab is not displayed. ► To set your synchronization preferences: In the Settings screen, select the Sync tab. Edit one or more of the synchronization settings, as required. The Synchronization settings are described in Table 17. Table 17: Synchronization Settings Option Description Server settings The settings used to enable synchronization of your Contacts List and Calendar. Select Edit and press Enter to display the Server Settings screen. Configure the parameters, as required. Then select Done and press Enter. Synchronizati on status Indicates the last time the Calendar and/or Contacts were successfully synchronized. Select View and press Enter to display the details. Setting Device Preferences The settings configured in the Device tab determine the look of your Ogo screen and how alerts are displayed when messages are received, sent or deleted. ► To set your device preferences: 82 In the Settings screen, select the Device tab. Edit one or more of the device settings, as required. The Device settings are described in Table 18. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Table 18: Device Settings Option Screen brightness Brightness period Description The level of brightness of the Ogo screen display. Adjust the brightness by moving the indicator on the slider using the inside buttons on the 8-way selection key. The screen brightness changes immediately as you move from one level to the next. The time interval for which the screen brightness is maintained when no keys are pressed. The longer the brightness period, the more battery power consumed. Press Enter and select the desired period from the pop-up menu. Language The language of the Ogo system interface. Press Enter and select the preferred language from the pop-up menu. Home wallpaper The background theme displayed on your Ogo screen. Press Enter and select a wallpaper from the popup menu. SIM PIN required For security purposes, enabling this option prompts you to enter a PIN when the device is powered on. WARNING! If you forget your SIM PIN, you have only three opportunities to correctly enter it. After three failed attempts, you are asked to enter your PUK code in order to reactivate your SIM. You must contact your carrier if you do not have the PUK code. Change PIN code Changes your PIN code. Be sure to keep a record of your new code in a safe place. Select Change and press Enter to display the Change PIN code screen. Set your new PIN code and select Done. Banner settings 錯誤! 尚未定義樣式。 Enables you to control whether or not banners appear when new messages are received and/or when IM contacts come online. 83 OGO 2 User Manual Option Description Select Open and press Enter to display the Banner Settings screen. Select when you want to allow the display of banners (new IM or SMS, new e-mail, and/or IM contact comes online), and select Done. Reset device Resets your Ogo device to its original factory settings, permanently removing all personal and account information (for example, if you are preparing to give the device to someone else). Select Reset and press Enter. A warning is displayed. Select OK and press Enter to reset the device. The device restarts after resetting. Confirm msg. delete Prompts you for confirmation before deleting a message. Prompt to add contacts Prompts you to add a contact when you send an e-mail or SMS/text message to an address/number that is not already in your Ogo Contact List. Restore canceled pop-ups Restores canceled pop-up windows. This option is not currently available. Check for software updates Automatically checks for software updates. Bluetooth settings Enables you to configure the use of Bluetooth with your Ogo. Note: The availability of this option depends on your Ogo model and cellular operator. Select Open and press Enter to display the Bluetooth settings screen. Configure the following parameters: 84 • Local device name: The designated Bluetooth name of the Ogo device. Other Bluetooth devices searching for this Ogo recognize it by this designation. • Change name: The setting used to change the 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Option Description Local device name. • My devices: The names of all of the Bluetooth devices that are paired with the Ogo device. • Search for devices: An option scans the airwaves for available Bluetooth devices to connect to. Select Scan and press Enter; a popup window appears showing that a search is in progress. • Temporary visibility: To protect itself from undesired contacts, the Ogo is normally "invisible" to random searches. When you wish to be found, the Ogo must be made "visible" to the airwaves. Select Enable and press Enter; a pop-up window appears informing you that your Ogo will be temporarily visible for 1 minute. Setting Your Calendar Preferences The settings configured in the Calendar tab determine how your calendar is displayed and managed on your Ogo device. ► To set your calendar preferences: In the Settings screen, select the Calendar tab. Edit one or more of the calendar settings, as required. The calendar settings are described in Table 19. Table 19: Calendar Settings Option Description Default view The default time resolution for viewing your calendar (Day, Week, or Month). Press Enter and select the desired period from the pop-up menu. Default day view The default view for viewing a day in the calendar (Detailed, Summary, or Last viewed). Press Enter and select the desired period from the pop-up menu. 錯誤! 尚未定義樣式。 85 OGO 2 User Manual Option Description Default reminder The default time (in minutes) in advance to be reminded of an upcoming appointment. Press Enter and select the desired time interval from the pop-up menu. Work week The standard work week settings, including the starting and ending hours and the first day of the week. Select Open and press Enter to display the Work week screen. Default snooze period The default time (in minutes) after which a repeat reminder is displayed. Press Enter and select the desired time interval from the pop-up menu. Delete items older than The time interval after which items are to be removed from the calendar. Press Enter and select the desired time interval from the pop-up menu. Delete confirmation Displays a confirmation message before deleting an appointment from the calendar. Tooltips in week view Displays tooltips when an appointment is selected in week view. Setting Your Sounds Preferences The settings configured in the Sound tab enable you to determine the sounds made by your Ogo in various situations. ► To set your sounds preferences: In the Settings screen, select the Sounds tab. Edit one or more of the sound settings, as required. The Sounds settings are described in Table 20. Table 20: Sounds Settings Option 86 Description 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Option Description Ringtones Enables you to set the volume of the ringtone played to indicate an incoming call. Adjust the volume by moving the indicator on the slider using the left and right button on the 8-way selection key. System sounds Enables you to set the volume of the sounds played to indicate various system events. Adjust the volume by moving the indicator on the slider using the left and right button on the 8-way selection key. Alerts Enables you to set the volume of the sounds played to indicate an alert. Adjust the volume by moving the indicator on the slider using the left and right button on the 8-way selection key. Silent Mutes all of the device sounds (ringtones, system sounds and alert). Vibration Activates vibration to alert you to when a contact comes online or a new message is received. Key tones Turns on/off the sound made when Ogo keys are pressed. Alerticon sounds Turns on/off the sounds associated with alerticons. Message events Turns on/off the sounds made when messages are received. Presence events Turns on/off the sounds made when IM contacts sign on. System sounds Turns on/off the sounds made when you power on/off, or open/close the device. 錯誤! 尚未定義樣式。 87 OGO 2 User Manual Setting the Time and Date When your Ogo is powered on, it automatically synchronizes with the current time from your carrier’s network. If for some reason the network is not available, you can set the time and date manually using the settings on the Time & Date tab. Note: If your network does not provide the time and date, these settings are lost if you remove the battery. ► To set your time and date preferences: In the Settings screen, select the Time and Date tab. Edit one or more of the time and date settings, as required. The time and date settings are described in Table 21. Table 21: Time and Date Settings Option Description Device time The time as it is currently set on your Ogo. Network time The current time and date on the network Use network time Displays the network time as the default time on your Ogo. Set Time & Date Enables you to manually set the time and date. Select Open and press Enter to display the Set Time & Date screen. Insert the date and time, and select Done. Note: Manually setting the time and date stops automatic updates. Time format Determines the format for displaying time on your Ogo (24H or AM/PM). Press Enter and select the desired time format from the pop-up menu. Date format Determines the format for displaying dates on your Ogo (DD/MM/YY or MM/DD/YY). Press Enter and select the desired date format from the pop-up menu. 88 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Setting Your Network Preferences The settings configured in the Network tab are typically used by your cellular operator for troubleshooting. ► To set your network preferences: In the Settings screen, select the Network tab. Edit one or more of the network settings, as required. The network settings are described in Table 22. Table 22: Network Settings Option Description Active network The name of the active network. Network selection The mode for selecting the active network (Auto or Manual). Scan for networks Scans for available networks. This option is enabled manual selection only. Messaging center The phone number of the messaging center to be called to retrieve your voice mail (if supported by your cellular carrier). Edit SMSC number The number of the messaging center for SMS services. Select Edit and press Enter to display the Edit SMSC number screen. Insert/edit the number and select Done. GPRS configuration The GPRS settings, including APN, authentication, user and password. Select Edit and press Enter to display the GPRS configuration screen. Configure the settings and select Done. GPRS status 錯誤! 尚未定義樣式。 The status of your GPRS connection (Connected, Not connected, Connection denied, Paused, or Not available). 89 OGO 2 User Manual Option Description Data counters Enables you to view the cumulative volume of incoming and outgoing bytes. You can manually reset these counters. Select Open and press Enter to display the Data counters screen. To reset the counters, select Reset and press Enter. Viewing Your System Settings The System tab displays the current capacities and identifying characteristics of your Ogo. ► To view your system preferences: In the Settings screen, select the System tab. The system settings are described in Table 23. Table 23: System Settings Option Description Contacts The number of existing contact records; the number of contact records available for future use. Software The version number of the software on your Ogo (for example, v3.0_PRO (20121). IMSI The unique identifier of the SIM card. IMEI The unique identifier of the device. Battery The battery level, as a percentage of total battery capacity. Check for updates Enables you to manually check for available software updates for your Ogo. Select Check and press Enter. 90 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Important Safety Information Radio Frequency (RF) Energy When your device is powered on, it receives and transmits RF energy. While this device complies with U.S. regulatory requirements concerning exposure of human beings to RF energy, you always want to minimize exposure. To minimize your exposure to this RF energy, follow these procedures: Use only the antenna supplied with the device or an approved replacement. For body-worn operation, place the device in a supplied or approved clip, holder, holster, case, etc. Use AT&T Wireless-approved accessories. For more information on RF, see www.fda.gov/cellphones. RF Interference/Compatibility In some instances, your device will cause interference with other electronic devices. Here are a few rules to follow: Power off your device in any facility or area, such as hospitals or in blasting areas, where posted notices instruct you to do so. This includes notices saying, “Turn off two-way radio.” Follow instructions from airline crew for use of this device on an airplane. If you use a pacemaker, hearing aid or other medical device that may be affected by RF, consult your health care provider or the manufacturer’s recommendations before using this device. Generally, they recommend that you hold a device that is ON more than six inches from the pacemaker and do not carry it in your breast pocket. Check your vehicle owner’s manual or your dealer to be sure that you can use this device in your vehicle and it will not interfere with any of your vehicle’s electronic systems. For any equipment added to your vehicle, check with the equipment manufacturer or where you purchased it. 錯誤! 尚未定義樣式。 91 OGO 2 User Manual Potentially Explosive Atmospheres In rare cases, your device can emit a spark that could cause an explosion or fire. To minimize this risk, do the following: Do not use your device and do not remove, replace, or charge batteries when you are in an area with a potentially explosive atmosphere. Such areas are not always marked and include fueling areas like gas stations, below deck on boats, fuel or chemical transfer or storage facilities, vehicles using LP gas, or areas where the air contains chemicals or particles such as grain, dust, or metal powders. Do not transport or store flammable gas, liquids, or explosives in your vehicle, especially if you plan to use your device. Using Device Safely While Driving Note to Parents: Review this section with your child and establish guidelines for their use of this device when they are driving. Using your device while driving can distract you and could result in an accident. Consider your alternatives: Let the device receive your messages and then respond to them at your convenience. Ask a passenger to view your messages. Pull off road and park in a safe location before using device. Accessories Only use AT&T Wireless-approved accessories. Using unapproved accessories may cause the device to malfunction, resulting in property damage or injury. Batteries and Battery Chargers Lithium ion batteries can become very hot and cause serious injury or property damage if the battery terminals touch metal objects, such as jewelry, keys, coins, or chains. 92 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 Be careful when putting a charged battery that is separated from the device inside a pocket, purse, or other container that may have metal objects. Follow all safety information on the battery. Do not puncture battery or place battery or device in a fire. Dispose of the battery and device in accordance with local regulations. Keep battery away from children. Only use Ogo-certified batteries and battery chargers. Use of unapproved batteries and chargers could result in damage to the battery or charger, and, in extreme circumstances, to a battery explosion. Only use the charger indoors and with an acceptable power source. See Charging the Battery on page 17 for more information on using the battery charger. Repetitive Motion Injuries Your fingers, thumbs, hands, arms, shoulders or neck may start to hurt if you use this device for messaging for a long time. To minimize this discomfort, take a 15-minute break for each hour of device use, and stop for several hours if any part of your body starts to hurt. If you still have discomfort after stopping for a few hours, see your doctor. Caring for Your Device and Charger Do not allow foreign objects or liquids to get in your device. These can cause a short and result in fire, electrical shock, or damage to your device or its battery. Unplug the charger before cleaning the device or charger. Do not use liquid or aerosol cleaners or solvents to clean. Use only a dry cloth. Place the device and the charger on a stable, level surface so it doesn’t fall, possibly causing damage or injury. Do not place on or near a heat source or on an electrical product that produces heat. 錯誤! 尚未定義樣式。 93 OGO 2 User Manual Device Service Bring your device, charger, or accessories to the place of purchase or to an authorized service facility if any of these items have been dropped or damaged or have been exposed to liquid/water or extreme heat. Also, bring it in for service if any of these items become very hot to the touch or do not operate normally after following the instructions. Do not disassemble the device, charger, or any accessories. Doing so could cause further damage and could void the warranty. Radio Frequency Signals A wireless phone operates by sending and receiving Radio Frequency (RF) signals, and therefore emits low levels of RF energy when the phone is on. Many studies have been conducted concerning RF exposure. Based on these studies, the U.S. Food and Drug Administration (FDA) has concluded that the available scientific evidence doesn’t show that any health problems are associated with using wireless devices, although there is no proof that they’re absolutely safe. Further scientific research is ongoing, and AT&T Wireless supports this research. For more information, you can review the FDA’s Consumer Update on Wireless Phones, which is available from the FDA at 1 888 463-6332. Additional consumer information on wireless phones and RF safety is available online at the joint FDA FCC Web site, Cell Phone Facts, at www.fda.gov/cellphones. The Federal Communications Commission (FCC) has established guidelines setting limits for RF exposure from wireless phones (these limits are called the Specific Absorption Rate or SAR). AT&T Wireless sells only those phones and devices that have been certified by the manufacturers as complying with FCC guidelines. For more information about FCC guidelines and SAR limits, you can visit the FCC’s Web site at www.fcc.gov/cellphones or contact the FCC at 1 202 418-2464. 94 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: SOW-OGOCT25E Statement according to FCC part 15.21. Modifications not expressly approved by CMCS could void the user’s authority to operate the equipment. Statement according to FCC part 15.105. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet that is on a circuit different from the receiver. Battery Safety Precautions For the safe use of lithium ion batteries always follow the instructions provided below. Improper handling of lithium ion batteries may result in injury or damage from electrolyte leakage, heating, ignition, or explosion. 錯誤! 尚未定義樣式。 95 OGO 2 User Manual Danger! 96 Never use the batteries with anything other than the specifically designed equipment. Always use the battery charger provided with the device. When discarding a battery, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. Never disassemble or modify the battery. The battery contains a circuit designed to enhance safety. Damaging this circuit may cause overheating, fire, or bursting. Never expose or charge a battery under high temperature conditions, such as near a fire or in the direct sunlight. If the ambient temperature is too high, the protection circuit may be actuated, preventing further charging, or damaged. Never short-circuit the battery by connecting the positive and negative terminals with a metal material. Do not store or carry the battery where it could come into contact with metal objects, such as a key chain or necklace. Never allow the battery to get wet or to be immersed in water. Stop charging if the battery is not charged after the prescribed charge time. If leakage of the electrolyte occurs, or if there is an offensive odor, immediately remove the battery from any source of fire or spark. If you become aware of any abnormal phenomena, such as odor, discoloration, or deformation, during use, while charging, or when storing the battery, remove the battery from the device or charger and stop using it. In the event the electrolyte comes into contact with the eyes, flush thoroughly with clean water, without rubbing. Consult with a physician immediately. Never impact, pierce or crush the battery. Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If it contacts the eye, flush the eye with water for 15 minutes and seek medical attention. Do not place the battery in a microwave oven or high-pressure container. 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 RF Exposure Tests for Specific Absorption Rate (SAR) are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operation can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements may differ among device models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for safe exposure. For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only accessories that contain no metallic components and provide a separation distance of 1.5cm (0.6 inches) to the body. Use of other accessories may violate FCC RF exposure guidelines and should be avoided. Health and Safety Information Exposure to Radio Frequency (RF) Signals Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies: American National Standards Institute (ANSI) IEEE. C95.1-1992 National Council on Radiation Protection and Measurement (NCRP). Report 86.1986. 錯誤! 尚未定義樣式。 97 OGO 2 User Manual International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*. *In the U.S. and Canada, the SAR limit for mobile devices used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations. SAR Information THIS MODEL DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless mobile GSM device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies: American National Standards Institute (ANSI) IEEE. C95.1-1992. International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. National Council on Radiation Protection and Measurement (NCRP). Report 86.1986. The exposure standard for wireless mobile GSM device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*. 98 錯誤! 尚未定義樣式。 錯誤! 尚未定義樣式。 This device was tested for typical body-worn operations. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the terminal, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure requirements and should be avoided. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID SOW-OGOCT25E. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications and Internet Association (CTIA) Web site at http://www.devicefacts.net. *In the U.S. and Canada, the SAR limit for mobile GSM device used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations. Warrantee and Conditions Please see www.ogo.com for the warranty and conditions for your Ogo device. 錯誤! 尚未定義樣式。 99
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.0.0 (Windows) Modify Date : 2007:06:07 18:27:28+08:00 Create Date : 2007:05:31 11:26:34+08:00 Metadata Date : 2007:06:07 18:27:28+08:00 Format : application/pdf Title : untitled Document ID : uuid:d6dd1777-35a2-41c0-a7d7-6900fc614395 Instance ID : uuid:5edacaa8-6ffb-452c-9a2e-df9567b831d9 Page Count : 109EXIF Metadata provided by EXIF.tools