Inseego NVWE362 IP Network Camera(PCS Licensed Transmitter - Module) User Manual

Novatel Wireless Inc IP Network Camera(PCS Licensed Transmitter - Module)

User Manual

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-User's manualEMC compliance Ltd. Page: 1 of 1480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval.
Installation Guide
INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN !CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL. This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. !This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
Installation Guide 201307B 3 Table of Contents 1. FEATURES ............................................................................................................. 42. PACKAGE CONTENTS............................................................................................. 53. PART NAMES ........................................................................................................ 64. INSTALLATION ...................................................................................................... 74.1. Lens Position ...................................................................................................................... 8 4.2. Setting the Image Attribute ............................................................................................... 8 6. CONFIGURATION .................................................................................................. 96.1. View video on web page .................................................................................................... 9 6.2. Reset ................................................................................................................................. 10 6.3. Factory Default ................................................................................................................. 10 APPENDIX (A): SPECIFICATIONS .............................................................................. 11 Summary ................................................................................................................................. 11 Functional Features ................................................................................................................. 12 Environment Characteristics ................................................................................................... 12 Environment Characteristics ................................................................................................... 12 Mechanical Characteristics ..................................................................................................... 12 APPENDIX (B): DIMENSIONS ................................................................................... 13 REVISION HISTORY ................................................................................................. 14
Installation Guide 201307B 4 1. FEATURESCamera Indoor Cube IP CameraHD720 (1280 x 720) streaming1/4” 720p CMOSImprovement of color rolling suppressionStreaming Dual streaming modeBurnt-in text supportUnicast supportedVideo Video compression: H.264/ MJPEG, 30FPS@720pBuilt-in video motion detectionNetwork Verizon Wireless LTE B13,CDMA EVDO 800/1900RTSP/ HTTP protocol supportAdditional Features Built-in Video Content AnalysisSDK (Software Development Kit) providedVCA (Video Content Analysis) VCA Presence (Standard)VCA Surveillance (Optional)
Installation Guide 201307B 5 2. PACKAGE CONTENTSUnpack carefully and handle the equipment with care. The packaging contains: Camera DC power adaptor Screws and Anchor blocks Quick Installation Guide NoteiPackage contents are subject to change without prior notice.
Installation Guide 201307B 6 3. PART NAMES①PIR sensorDetects movement of objects ②Sensor indicator LEDWhen PIR sensor detects, the indicator glows in red ③Status LEDLED glows in green when the device is connected ④White-light LED Illuminator⑤Privacy ShutterManual shutter to close the lens ⑥Camera lensPrepositioned 1/4” 720p CMOS sensor ⑦Reset buttonThe reset button can be used for restarting the device or resetting it to Factory Default. Refer to 6.3. Reset and 6.4. Factory Default for more details. ⑧Power Adaptor Connector (DC 12V)The camera needs a DC 12V adapter for power supply. ⑨USIM SocketInsert USIM Card ETHERNETDO DIOut InComDC12VCom② * Models herein and their appearance are subject to change without any prior notice.⑥ ③ ④ ⑤ ①
Installation Guide 201307B 7 4.INSTALLATION1) Drill two holes on the desired position of installation and insert anchor blocks intothe holes. 2) Position the mount bracket to anchor blocks.3) Fasten the mount bracket with screws.4) Manually position the camera to area where it will be monitored.To prevent camera falling off from the mounted area, make sure the mounted surface firm and stable enough to support the camera. If any reinforcement is needed, consult with your safety personnel and proceed with the installation. Caution!we recommend to keep 20cm distance when installing this module.
Installation Guide 201307B 8 4.1. Lens Position The device’s lens is prepositioned. While installing with wall-mount bracket, position the camera body where images will be captured. 4.2. Setting the Image Attribute Image attributes can be configured through the web interface. (Microsoft® Internet Explorer recommended) The menu of image attribute can be found under Setup > Video > Camera. Through setting menu, brightness, contrast, saturation and sharpness, orientation, exposure control, backlight compensation, digital slow shutter (DSS), day and night mode, and image noise filter can be adjusted.
Installation Guide 201307B 9 5. CONFIGURATION5.1. View video on web page Once the device’s proper IP address has been identified, type the URL in a web browser to access the camera. At first time access, installation window may pop up. 1. When the browser asks to install the AxUMF software, click Install to proceed.2. When Setup installation pop-up window appears, click install to proceed with rest ofinstallations.NoteiDepends on system OS and Internet Explorer version, Installation experience may differ from one another. Figures described above are from Windows 7, Internet Explorer 9 environment.
Installation Guide 201307B 10 5.2. Reset 1. While the device is on, press the reset button for 1~2 seconds.2. Wait for the system to reboot.5.3. Factory Default 1. While the device is on, press reset button and hold.2. Release the Reset button after about 5 seconds when green LED blinks, which is located inthe front panel, at rate of 200ms.3. Wait for the system to reboot.
Installation Guide 201307B 11 APPENDIX (A): SPECIFICATIONS Summary Camera Module Image Sensor 1/4” 720p CMOS Effective Pixels 1280 x 720 Scanning System Progressive scanning AGC Control Auto Minimum Illumination 0.8 Lux(50IRE), 0.1 Lux(DSS ON) Lens 2.7mm F2.0 Megapixel Field of View 91° (Horizontal) Day & Night Software Smart Edge Enhance Supported (Auto adjust the sharpness by Lux) 2D-DNR Supported (1 ~ 16) DSS (Sens-up) 2X ~ 32X White Balance ATW / Manual / Push BLC On(possible to designate zone) / Off Video Compression Format H.264, MJPEG Number of Streams Dual Stream, Configurable Resolution 1280 x 720, 800 x 450, 480 x 270, 320 x 180 Compression FPS 30fps@720p Motion Detection Built-in Burnt-in Text Video stream overlay text
Installation Guide 201307B 12 Functional Features PIR Sensor Supported Network Verizon Wireless LTE B13, CDMA EVDO 800/1900 Protocol TCP/IP(IPv4), HTTP, RTP/RTSP, DHCP, FTP, SMTP, NTP, ARP, ICMP Privacy Shutter Detecting Position of Shutter On/Off Environment Characteristics Power Source DC 12V Power over Ethernet None Power Consumption (Approx) 800mA @ DC 12V Environment Characteristics Operating Temperature DC12V : 0˚C ~ 40˚C (32˚F ~ 104˚F) Operating Humidity Up to 85% RH, Non-condensing Certification FCC Class B, CE, KC, RoHS IP Protection Rating No Mechanical Characteristics Material Plastic (PC + ABS) Color Ivory Dimension 76(W) x 107(H) x 40(D)mm Weight (Approx) 150g (device only)
Installation Guide 201307B 13 APPENDIX (B): DIMENSIONS (Unit: mm)
Installation Guide 201307B 14 REVISION HISTORY MAN# Comments 201307B Initial release version

Navigation menu