Inseego NVWE362 IP Network Camera(PCS Licensed Transmitter - Module) User Manual
Novatel Wireless Inc IP Network Camera(PCS Licensed Transmitter - Module)
Inseego >
Contents
User Manual
http://www.emc2000.co.kr
FCC TEST REPORT
Report No.: EMC-FCC-
User's manual
EMC compliance Ltd. Page: 1 of 1
480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea
82 31 336 9919 (Main) 82 31 336 4767 (Fax)
This test report shall not be reproduced except in full, Without the written approval.
Installation Guide
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL.
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
!
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
Installation Guide
201307B 3
Table of Contents
1. FEATURES ............................................................................................................. 4
2. PACKAGE CONTENTS............................................................................................. 5
3. PART NAMES ........................................................................................................ 6
4. INSTALLATION ...................................................................................................... 7
4.1. Lens Position ...................................................................................................................... 8
4.2. Setting the Image Attribute ............................................................................................... 8
6. CONFIGURATION .................................................................................................. 9
6.1. View video on web page .................................................................................................... 9
6.2. Reset ................................................................................................................................. 10
6.3. Factory Default ................................................................................................................. 10
APPENDIX (A): SPECIFICATIONS .............................................................................. 11
Summary ................................................................................................................................. 11
Functional Features ................................................................................................................. 12
Environment Characteristics ................................................................................................... 12
Environment Characteristics ................................................................................................... 12
Mechanical Characteristics ..................................................................................................... 12
APPENDIX (B): DIMENSIONS ................................................................................... 13
REVISION HISTORY ................................................................................................. 14
Installation Guide
201307B 4
1. FEATURES
Camera
Indoor Cube IP Camera
HD720 (1280 x 720) streaming
1/4” 720p CMOS
Improvement of color rolling suppression
Streaming
Dual streaming mode
Burnt-in text support
Unicast supported
Video
Video compression: H.264/ MJPEG, 30FPS@720p
Built-in video motion detection
Network
Verizon Wireless LTE B13,CDMA EVDO 800/1900
RTSP/ HTTP protocol support
Additional Features
Built-in Video Content Analysis
SDK (Software Development Kit) provided
VCA (Video Content Analysis)
VCA Presence (Standard)
VCA Surveillance (Optional)
Installation Guide
201307B 5
2. PACKAGE CONTENTS
Unpack carefully and handle the equipment with care. The packaging contains:
Camera
DC power adaptor
Screws and Anchor blocks
Quick Installation Guide
Note
i
Package contents are subject to change without prior notice.
Installation Guide
201307B 6
3. PART NAMES
①PIR sensor
Detects movement of objects
②Sensor indicator LED
When PIR sensor detects, the indicator glows in red
③Status LED
LED glows in green when the device is connected
④White-light LED Illuminator
⑤Privacy Shutter
Manual shutter to close the lens
⑥Camera lens
Prepositioned 1/4” 720p CMOS sensor
⑦Reset button
The reset button can be used for restarting the device or resetting it to Factory Default. Refer to 6.3. Re
set and 6.4. Factory Default for more details.
⑧Power Adaptor Connector (DC 12V)
The camera needs a DC 12V adapter for power supply.
⑨USIM Socket
Insert USIM Card
ETHERNET
DO DI
Out In
Com
DC12V
Com
②
* Models herein and their appearance are subject to change without any prior notice.
⑥
③
④
⑤
①
Installation Guide
201307B 7
4.INSTALLATION
1) Drill two holes on the desired position of installation and insert anchor blocks into
the holes.
2) Position the mount bracket to anchor blocks.
3) Fasten the mount bracket with screws.
4) Manually position the camera to area where it will be monitored.
To prevent camera falling off from the mounted area, make sure the mounted
surface firm and stable enough to support the camera. If any reinforcement is
needed, consult with your safety personnel and proceed with the installation.
Caution
!
we recommend to keep 20cm distance when installing this module.
Installation Guide
201307B 8
4.1. Lens Position
The device’s lens is prepositioned. While installing with wall-mount bracket, position the
camera body where images will be captured.
4.2. Setting the Image Attribute
Image attributes can be configured through the web interface. (Microsoft® Internet Explorer
recommended) The menu of image attribute can be found under Setup > Video > Camera.
Through setting menu, brightness, contrast, saturation and sharpness, orientation, exposure
control, backlight compensation, digital slow shutter (DSS), day and night mode, and image
noise filter can be adjusted.
Installation Guide
201307B 9
5. CONFIGURATION
5.1. View video on web page
Once the device’s proper IP address has been identified, type the URL in a web browser to
access the camera. At first time access, installation window may pop up.
1. When the browser asks to install the AxUMF software, click Install to proceed.
2. When Setup installation pop-up window appears, click install to proceed with rest of
installations.
Note
i
Depends on system OS and Internet Explorer version, Installation experience may
differ from one another. Figures described above are from Windows 7, Internet
Explorer 9 environment.
Installation Guide
201307B 10
5.2. Reset
1. While the device is on, press the reset button for 1~2 seconds.
2. Wait for the system to reboot.
5.3. Factory Default
1. While the device is on, press reset button and hold.
2. Release the Reset button after about 5 seconds when green LED blinks, which is located in
the front panel, at rate of 200ms.
3. Wait for the system to reboot.
Installation Guide
201307B 11
APPENDIX (A): SPECIFICATIONS
Summary
Camera Module
Image Sensor
1/4” 720p CMOS
Effective Pixels
1280 x 720
Scanning System
Progressive scanning
AGC Control
Auto
Minimum Illumination
0.8 Lux(50IRE), 0.1 Lux(DSS ON)
Lens
2.7mm F2.0 Megapixel
Field of View
91° (Horizontal)
Day & Night
Software
Smart Edge Enhance
Supported (Auto adjust the sharpness by Lux)
2D-DNR
Supported (1 ~ 16)
DSS (Sens-up)
2X ~ 32X
White Balance
ATW / Manual / Push
BLC
On(possible to designate zone) / Off
Video
Compression Format
H.264, MJPEG
Number of Streams
Dual Stream, Configurable
Resolution
1280 x 720, 800 x 450, 480 x 270, 320 x 180
Compression FPS
30fps@720p
Motion Detection
Built-in
Burnt-in Text
Video stream overlay text
Installation Guide
201307B 12
Functional Features
PIR Sensor
Supported
Network
Verizon Wireless LTE B13, CDMA EVDO 800/1900
Protocol
TCP/IP(IPv4), HTTP, RTP/RTSP, DHCP, FTP, SMTP, NTP, ARP,
ICMP
Privacy Shutter
Detecting Position of Shutter On/Off
Environment Characteristics
Power Source
DC 12V
Power over Ethernet
None
Power Consumption
(Approx)
800mA @ DC 12V
Environment Characteristics
Operating Temperature
DC12V : 0˚C ~ 40˚C (32˚F ~ 104˚F)
Operating Humidity
Up to 85% RH, Non-condensing
Certification
FCC Class B, CE, KC, RoHS
IP Protection Rating
No
Mechanical Characteristics
Material
Plastic (PC + ABS)
Color
Ivory
Dimension
76(W) x 107(H) x 40(D)mm
Weight (Approx)
150g (device only)
Installation Guide
201307B 13
APPENDIX (B): DIMENSIONS
(Unit: mm)
Installation Guide
201307B 14
REVISION HISTORY
MAN#
Comments
201307B
Initial release version