Inseego NVWE362 IP Network Camera(PCS Licensed Transmitter - Module) User Manual
Novatel Wireless Inc IP Network Camera(PCS Licensed Transmitter - Module)
Inseego >
Contents
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2021055 |
| Application ID | LQ7gaWusGokr6xbtCfyGFw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 124.92kB (1561458 bits) |
| Date Submitted | 2013-07-19 00:00:00 |
| Date Available | 2013-07-19 00:00:00 |
| Creation Date | 2013-07-10 13:54:48 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2013-07-16 09:41:09 |
| Document Title | User Manual |
| Document Creator | Microsoft® Office Word 2007 |
FCC TEST REPORT Report No.: EMC-FCChttp://www.emc2000.co.kr User's manual EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Installation Guide INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL. This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. Installation Guide Table of Contents 1. FEATURES ............................................................................................................. 4 2. PACKAGE CONTENTS............................................................................................. 5 3. PART NAMES ........................................................................................................ 6 4. INSTALLATION ...................................................................................................... 7 4.1. Lens Position ...................................................................................................................... 8 4.2. Setting the Image Attribute ............................................................................................... 8 6. CONFIGURATION .................................................................................................. 9 6.1. View video on web page .................................................................................................... 9 6.2. Reset ................................................................................................................................. 10 6.3. Factory Default ................................................................................................................. 10 APPENDIX (A): SPECIFICATIONS .............................................................................. 11 Summary ................................................................................................................................. 11 Functional Features ................................................................................................................. 12 Environment Characteristics ................................................................................................... 12 Environment Characteristics ................................................................................................... 12 Mechanical Characteristics ..................................................................................................... 12 APPENDIX (B): DIMENSIONS ................................................................................... 13 REVISION HISTORY ................................................................................................. 14 201307B Installation Guide 1. FEATURES Camera Indoor Cube IP Camera HD720 (1280 x 720) streaming 1/4” 720p CMOS Improvement of color rolling suppression Streaming Dual streaming mode Burnt-in text support Unicast supported Video Video compression: H.264/ MJPEG, 30FPS@720p Built-in video motion detection Network Verizon Wireless LTE B13,CDMA EVDO 800/1900 RTSP/ HTTP protocol support Additional Features Built-in Video Content Analysis SDK (Software Development Kit) provided VCA (Video Content Analysis) VCA Presence (Standard) VCA Surveillance (Optional) 201307B Installation Guide 2. PACKAGE CONTENTS Unpack carefully and handle the equipment with care. The packaging contains: Camera DC power adaptor Screws and Anchor blocks Quick Installation Guide Package contents are subject to change without prior notice. Note 201307B Installation Guide 3. PART NAMES ① ④ ② ③ ⑤ ⑥ ETHERNET Com * Models herein and their appearance are subject to change without any prior notice. ① PIR sensor Detects movement of objects ② Sensor indicator LED When PIR sensor detects, the indicator glows in red ③ Status LED LED glows in green when the device is connected ④ White-light LED Illuminator ⑤ Privacy Shutter Manual shutter to close the lens ⑥ Camera lens Prepositioned 1/4” 720p CMOS sensor ⑦ Reset button The reset button can be used for restarting the device or resetting it to Factory Default. Refer to 6.3. Re set and 6.4. Factory Default for more details. ⑧ Power Adaptor Connector (DC 12V) The camera needs a DC 12V adapter for power supply. ⑨ USIM Socket Insert USIM Card 201307B Installation Guide 4. INSTALLATION 1) Drill two holes on the desired position of installation and insert anchor blocks into the holes. 2) Position the mount bracket to anchor blocks. 3) Fasten the mount bracket with screws. 4) Manually position the camera to area where it will be monitored. Caution To prevent camera falling off from the mounted area, make sure the mounted surface firm and stable enough to support the camera. If any reinforcement is needed, consult with your safety personnel and proceed with the installation. we recommend to keep 20cm distance when installing this module. 201307B Installation Guide 4.1. Lens Position The device’s lens is prepositioned. While installing with wall-mount bracket, position the camera body where images will be captured. 4.2. Setting the Image Attribute Image attributes can be configured through the web interface. (Microsoft® Internet Explorer recommended) The menu of image attribute can be found under Setup > Video > Camera. Through setting menu, brightness, contrast, saturation and sharpness, orientation, exposure control, backlight compensation, digital slow shutter (DSS), day and night mode, and image noise filter can be adjusted. 201307B Installation Guide 5. CONFIGURATION 5.1. View video on web page Once the device’s proper IP address has been identified, type the URL in a web browser to access the camera. At first time access, installation window may pop up. 1. When the browser asks to install the AxUMF software, click Install to proceed. 2. When Setup installation pop-up window appears, click install to proceed with rest of installations. Note 201307B Depends on system OS and Internet Explorer version, Installation experience may differ from one another. Figures described above are from Windows 7, Internet Explorer 9 environment. Installation Guide 5.2. Reset 1. 2. While the device is on, press the reset button for 1~2 seconds. Wait for the system to reboot. 5.3. Factory Default 1. While the device is on, press reset button and hold. 2. Release the Reset button after about 5 seconds when green LED blinks, which is located in the front panel, at rate of 200ms. 3. Wait for the system to reboot. 201307B 10 Installation Guide APPENDIX (A): SPECIFICATIONS Summary Camera Module Image Sensor 1/4” 720p CMOS Effective Pixels 1280 x 720 Scanning System Progressive scanning AGC Control Auto Minimum Illumination 0.8 Lux(50IRE), 0.1 Lux(DSS ON) Lens 2.7mm F2.0 Megapixel Field of View 91° (Horizontal) Day & Night Software Smart Edge Enhance Supported (Auto adjust the sharpness by Lux) 2D-DNR Supported (1 ~ 16) DSS (Sens-up) 2X ~ 32X White Balance ATW / Manual / Push BLC On(possible to designate zone) / Off Compression Format H.264, MJPEG Number of Streams Dual Stream, Configurable Resolution 1280 x 720, 800 x 450, 480 x 270, 320 x 180 Compression FPS 30fps@720p Motion Detection Built-in Burnt-in Text Video stream overlay text Video 201307B 11 Installation Guide Functional Features PIR Sensor Supported Network Verizon Wireless LTE B13, CDMA EVDO 800/1900 Protocol TCP/IP(IPv4), HTTP, RTP/RTSP, DHCP, FTP, SMTP, NTP, ARP, ICMP Privacy Shutter Detecting Position of Shutter On/Off Environment Characteristics Power Source Power over Ethernet Power Consumption (Approx) DC 12V None 800mA @ DC 12V Environment Characteristics Operating Temperature Operating Humidity Certification IP Protection Rating DC12V : 0˚C ~ 40˚C (32˚F ~ 104˚F) Up to 85% RH, Non-condensing FCC Class B, CE, KC, RoHS No Mechanical Characteristics Material Color Dimension Weight (Approx) 201307B Plastic (PC + ABS) Ivory 76(W) x 107(H) x 40(D)mm 150g (device only) 12 Installation Guide APPENDIX (B): DIMENSIONS (Unit: mm) 201307B 13 Installation Guide REVISION HISTORY MAN# Comments 201307B Initial release version 201307B 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2013:07:10 13:54:48+09:00 Creator : Microsoft® Office Word 2007 Modify Date : 2013:07:16 09:41:09+09:00 Subject : Installation Guide Has XFA : No Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2013:07:16 09:41:09+09:00 Producer : Microsoft® Office Word 2007 Format : application/pdf Description : Installation Guide Document ID : uuid:2e5ac006-8030-4312-b379-8ad8f5f030f6 Instance ID : uuid:ecaac250-7781-4d63-890d-d783ee77fa7b Page Count : 15EXIF Metadata provided by EXIF.tools