Intelibs D01T4JX5 Radio Hub Unit (RHU) User Manual
Intelibs, Inc. Radio Hub Unit (RHU) Users Manual
Intelibs >
Users Manual
Intelibs, Inc. iDAS RHU Product Manual RHU Operational Manual for GPS-iDAS application Version: 1.3 12-16-2016 2 Contents Introduction .......................................................................................................................................... 6 Product Description .............................................................................................................................. 9 2.1 Network configuration .................................................................................................................. 9 2.2 External interface ports .............................................................................................................. 10 2.3 Configuration of RHU inside........................................................................................................ 11 2.4 Mechanical Drawing ................................................................................................................... 14 2.5 Technical Specifications .............................................................................................................. 15 2.5.1 General specifications ......................................................................................................... 15 2.5.2 Frequency allocation ........................................................................................................... 15 2.5.3 RHU RF specifications.......................................................................................................... 17 Installation .......................................................................................................................................... 18 3.1 Installation Requirements ........................................................................................................... 18 3.1.1 General Safety Precautions ................................................................................................. 19 3.2 Installation Tools ......................................................................................................................... 20 3.3 Item Check List ............................................................................................................................ 20 3.4 Mounting..................................................................................................................................... 20 3.5 Link (Donor) Antenna .................................................................................................................. 22 3.6 Power cable................................................................................................................................. 24 3.7 Optic cable .................................................................................................................................. 26 Configuration and Maintenance ......................................................................................................... 28 4.1 Configuring RHU using LMT ........................................................................................................ 29 4.1.1 LMT GUI (Graphic User Interface) Program ........................................................................ 29 4.1.2 System Requirement ........................................................................................................... 29 4.1.3 How to connect RHU using LMT GUI .................................................................................. 29 4.1.4 Main Window of LMT GUI................................................................................................... 30 4.2 Detail description of Manu bar in GUI ........................................................................................ 32 4.2.1 RHU window in GUI screen ................................................................................................. 32 4.2.2 Parameters details in RHU window .................................................................................... 33 4.2.3 SRU window in GUI screen .................................................................................................. 35 Intelibs, Inc. Proprietary and Confidential Page 2 3 4.2.4 Parameters details in SRU window ..................................................................................... 35 4.3 Firmware download .................................................................................................................... 36 4.4 Additional function of RHU ......................................................................................................... 36 4.4.1 ASD (Auto Shutdown) Function .......................................................................................... 36 4.4.2 ALC (Auto Limit level Control) Function .............................................................................. 37 4.4.3 AGC (Auto Gain Control) Function ...................................................................................... 37 4.4.4 Sub-band selection Function............................................................................................... 38 Human RF Exposure and Antenna placement guide .......................................................................... 39 Intelibs, Inc. Proprietary and Confidential Page 3 4 FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLER. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. Unauthorized use may result in significant forfeiture penalties including penalties in excess of $100,000 for each continuing violation. INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer for technical assistance. Suitable for use in environmental air space in accordance with Section 300-22 (c) of the National Electrical Code, and Sections 2-128, 12-010 (3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1. Intelibs, Inc. Proprietary and Confidential Page 4 5 CAUTION Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. This equipment is intended for use only with Intelibs Hybrid DAS systems. Important health and safety precautions When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions included with the device. DANGER Only use antennas, transceivers and chargers approved by Intelibs. The use of any nonapproved antenna, transceiver and charger may be dangerous. DANGER Allow only authorized personnel to service the DAS. Unauthorized service can invalidate the warranty. CAUTION Any modification of this product, including opening the unit, is prohibited and will void your warranty. Any use of the product or its components for purposes not expressly authorized by this document, including any use in an airplane or any other aviation application, is prohibited and will void your warranty. NOTE When using your device for prolonged periods of time, the device may become warm. In most cases, this condition is normal and therefore should not be interpreted as a problem with the device. Copyright information © 2013 Intelibs, Inc. All rights reserved. The information contained herein is subject to change without notice. Intelibs retains ownership of and all other rights to the material expressed in this document. Any reproduction of the content of this document without prior written permission from Intelibs is prohibited. Product names, logos, brands and other trademarks featured or referred to within this document are the property of their respective owners. The only warranties for Intelibs products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Intelibs shall not be liable for technical or editorial errors or omissions contained herein. Intelibs, Inc. Proprietary and Confidential Page 5 6 1 Introduction Radio Hub Unit (RHU) is a part of the Hybrid Distributed Antenna Systems (HDAS) to provide RF link solution between RF Source and Remote Unit (RU). This RHU receives RF signal over-the-air or wire line and this unit filters, amplifies and converts RF signal into optic signal and transmits to child unit such as FHU and RU through single mode fiber. RHU is built on a small form factor with six antenna ports for 700MHz, 850MHz, 1900MHz, AWS band and two GPS antenna ports with the following features Support for a multi frequency band, multi-technology and multi-carrier Wide band sub-channel selection by digital filter Antenna isolation detection and oscillation protection function Low Power consumption that can be operated by PoE or small AC/DC converter 20dBm Up Link composite power per band SNMP based remote management support Provide signal to remote unit(RU) site as far as 10Km distance that has 5dBo loss via single mode fiber Optic fiber sharing between different carriers AGC (Auto Gain Control), ALC(Auto Level Limit Control), IGC(Gain Control due to lack of antenna Isolation and ASD(Auto Shut Down) function Compact and high capacity with scalable design Ruggedized enclosure with more outdoor temperature compliance GPS port redundancy function in order to switchover when other GPS fails Hybrid DAS RHU is comprised of the following subsystems: FHU (Fiber Hub Unit): Interface unit between RHU and Remote Units, Convert O/E, compensate loss and convert E/O. this unit has optic input port and optic output port. SRU (Small power Remote Unit): Small power (23dBm per band) remote unit for indoor MRU(Medium power Remote Unit): Medium power(33dBm per band) remote unit for indoor HRU(High power Remote Unit): High power(37 ~ 43dBm per band) remote unit for outdoor MU (Master Unit): Element management server As illustrated in Figure 2-2, Hybrid DAS network is comprised of RHU, FHU and SRU/MRU/HRU. RHU and xRUs can transmit signal to coverage area. An optic cable can be shared between different carriers and different band. Intelibs, Inc. Proprietary and Confidential Page 6 7 Figure 1-1 RHU-RU connection configuration Intelibs, Inc. Proprietary and Confidential Page 7 8 Figure 1-2 Typical iDAS RHU-FHU-SRU/MRU network diagram Intelibs, Inc. Proprietary and Confidential Page 8 9 2 Product Description Radio Hub Unit (RHU) is a part of the Distributed Antenna System (DAS) to provide link between RF Source and DAS RU, to fill coverage gaps and to enhance the quality of service of extending coverage of mobile service. As shown in Figure 2-1, RHU is a compact platform with the natural heat convection. As unified form factor, RHU services multiple technologies on a single platform with 700/850/1900/2100MHz Quadruple-band and GPS L1 band frequencies reception. It can be mounted on the wall or 19” rack. Variety of the donor antenna can be used from Yagi directional antenna to high F/B Ratio directional antenna (or panel antenna). Figure 2-1 RHU system 2.1 Network configuration Four band RF signals such as 700/850/1900/2100MHz or 2 GPS L1 band from link and GPS antenna are fed to RHU and RHU amplifies these RF signals and converts into optical signal, and transmits this optical signals to child unit likes FHU or xRU. RHU can have up to 16 RUs and 5 FHU connections. A fiber optic cable can be shared between different carriers or different band. Each frequency band signals are combined to one wavelengths in a single fiber. Table 2-1 describes those wavelength assignments. Maximum allowed optic loss between RHU and RU system is 10 dBo. Table 2-1 Optic wavelength of each frequency band Frequency band 700/850/1900/2100MHz band GPS L1 band Downlink Wavelength 1,310 nm 1,550 nm Intelibs, Inc. Proprietary and Confidential Uplink Wavelength 1,550 nm 1,310 nm Page 9 10 RHU systems with different operating frequency band can be interconnected via over-the-air or RF Head-End unit. Typical RHU-FHU-SRU/MRU/HRU network diagram is depicted in figure 1-2. 2.2 External interface ports RHU has all interface connections at bottom side of an enclosure, which includes fiber, antennas and power port. Figure 2-3 shows the bottom side of RHU system. Figure 2-2 Bottom view of RHU system Table 2-2 Interface ports No. Port Connector type Description MOBILE 1 ~ 4 4.3-10 Female GPS 1~4 4.3-10 Female FIBER Cable gland Antenna RF cable connection port for 4-band GPS Antenna cable connection port. Two ports of these ports may be used for Mobile or GPS antenna connection Fiber inlet port PoE Cable gland Ethernet cable inlet port for PoE power supply AC POWER MS Female - 3PIN 120VAC Power cable connector Intelibs, Inc. Proprietary and Confidential Page 10 11 2.3 Configuration of RHU inside RHU system is comprised of several internal modules such as Radio Hub Modules (RHM), GPS Front-End Module (GPS FEM), optic module, and controller modules. Figure 2-3 shows inside of RHU system. Figure 2-3 Module configuration of RHU inside Intelibs, Inc. Proprietary and Confidential Page 11 12 Table 2-3 RHU system’s modules Module 700 RHM 850 RHM 1900 RHM 2100 RHM GPS FEM RHOM Picture Description [Down Link] This module filters 700 DL RF signal from link antenna, amplifies with low noise, filters A/B/C/UpperC sub-band signals by digital band pass filters and transmits the selected 700 DL RF signal to optical module. [Up Link] This module filters 700 UL RF signal from optical module, filterers A/B/C/UpperC sub-band signals by digital band pass filters, amplifies to get high power and transmits 700 UL RF signal via antenna port. [Down Link] This module filters 850 DL RF signal coming from link antenna, amplifies with low noise, filters sub-band by digital band pass filters and transmits the selected 850 DL RF signal to optical module. [Up Link] This module filters 850 UL RF signal coming from optical module, filters sub-band by digital band pass filters, amplifies to get high power and transmits 850 UL RF signal to antenna. [Down Link] This module filters 1900 DL RF signal coming from link antenna, amplifies with low noise, filters sub-band by digital band pass filters and transmits the selected 1900 DL RF signal to optical module. [Up Link] This module filters 1900 UL RF signal coming from optical module, filters sub-band by digital band pass filters, amplifies to get high power and transmits 1900 UL RF signal to antenna. [Down Link] This module filters 2100MHz DL RF signal coming from link antenna, amplifies with low noise, filters sub-band by digital band pass filters and transmits the selected 2100MHz DL RF signal to optical module. [Up Link] This module filters 1700 UL RF signal coming from optical module, filters sub-band by digital band pass filters, amplifies to get high power and transmits 1700 UL RF signal to antenna. This unit filters GPS L1 band signal, amplifies by low noise, converts GPS signal into optical signal and transmits this optic signal to RU site via fiber. This unit has two GPS ports to support GPS redundancy function. If one GPS fails, second GPS port switch over automatically. [Down Link] This module combines 4-band mobile RF signal from 700/850/1900/ AWS RHM or GPS-FEM and converts into optical signal and transmits to RU site via fiber. [Up Link] This module converts optical signal coming from fiber into RF UL signals and amplifies UL signals to compensate fiber loss and transmits to 700/850/1900/AWS RHM or GPS-FEM. Intelibs, Inc. Proprietary and Confidential Page 12 13 RF Controller (RFCU) This module controls and monitors all parameters of 700/850/1900/ AWS RHM and RHOM which related to 4-band DL/UL RF circuits. GPS Controller (GPSCU) This module manages all parameters of RF circuits of two GPS path. PoE Splitter ACDC Converter This module receives DC voltage through the Ethernet cable, converts into 24VDC and supplies DC voltage to each module. RHU can use one of PoE Splitter and ACDC converter according to installation environment. This module converts AC120V voltage to DC 24V and supply this DC voltage to each module. RHU can use one of PoE Splitter and ACDC converter according to installation environment. Intelibs, Inc. Proprietary and Confidential Page 13 14 2.4 Mechanical Drawing Figure 2-4 RHU Outside drawing Figure 2-5 RHU dimension Intelibs, Inc. Proprietary and Confidential Page 14 15 Figure 2-6 RHU Inside drawing 2.5 Technical Specifications 2.5.1 General specifications Table 2-4 General Specifications Specification Enclosure Type Dimension (mm) Weight (Kg) Power Supply Power Connector ANT RF In/Out Port Optic Connector Type Optic Wavelength Operating Temperature 2.5.2 Values Cabinet, Natural convection type 14.0(H) X 17.5(W) X 12(D) inch 70.5lb(32 Kg) @ 4band 120VAC, 60Hz PoE 48 ~ 56VDC MS Connecter for AC Input Cable gland for PoE Input 4.3-10 Type Female, bottom side LC/UPC, inside DL: 1310nm / UL: 1550nm for 700/850/1900/2100MHz DL: 1550nm / UL: 1310nm for GPS only -30℃ ~ 55℃ Frequency allocation 2.5.2.1 700 MHz band Down Link Up Link Intelibs, Inc. Proprietary and Confidential Page 15 16 2.5.2.2 850 MHz band 817 MHz Uplink Figure 2-9 Frequency allocation of 850 MHz band 862 MHz Downlink 2.5.2.3 1900 MHz band 2.5.2.4 AWS band Up Link Intelibs, Inc. Proprietary and Confidential Page 16 17 Down Link 2.5.2.5 GPS L1 Band - 1575.42 +/- 10MHz band 2.5.3 RHU RF specifications Table 2-5 RF specifications Parameters Frequency Values Band 700MHz 850MHz 1900MHz AWS Intelibs, Inc. Proprietary and Confidential DL 728 - 757MHz 862 – 894MHz 1910 – 1995MHz 2110 – 2155MHz Remarks UL 698 – 716MHz, 776 – 787MHz 817 – 849MHz 1850 – 1915MHz 1710 – 1755MHz Page 17 18 Bandwidth Channel filter BW RF port VSWR Frequency Stability System Delay Isolation Margin detect Fiber Connector Any 30MHz BW in each band Combination of 1.25MHz BW DL -60 ~ -30dBm/total UL 0dBm/total max. DL 0dBm/total UL 20dBm/total DL 45dB typ. by 1dB step UL 45dB typ. by 1dB step 2dBp-p 3dB max. DL Less than 6dB UL Less than -88dBm/Hz DL 1310nm / UL 1550nm 5dBo max. More than 40dBc More than 100dBc More than 100dBc 1.5: 1 max. ±0.02 ppm 3.0usec max. 0dB ~ 20dB Margin LC/UPC RF connector ANT Port: 4.3-10 Female Input level Output level RF Gain Gain Flatness Inband gain difference Noise Figure Noise level Optical wavelength Available Optic Loss Out of band rejection Power consumption DC power 100W max. for 4-Band RHU 80W max. for 2-Band & PoE/AC120V AC120V only @ Except 850MHz band @ each band total input level @ from SRU/BEU @ optic input level @ Link ANT output level @ 10 ~ 40dB gain control @ 10 ~ 40dB gain control @ Any 30MHz BW @ all band width of each band @ 40dB gain of DL @ RHU UL 45dB gain @ RHU – RU @ ±1.25MHz from band edge @ out of band @ DL/UL Isolation @ All of RF Port @ 20dBm output of UL HPA @ 2-Band Mobile and 2-GPS @ 4-Band Mobile 3 Installation 3.1 Installation Requirements Before and during installation, the following should be carefully verified in order to avoid any problem: Faulty Cabling/Connectors: Fiber cable and connectors must be verified prior to plugging into the RHU Dirty Connectors and ports Faulty Radio Hub Unit (RHU) components RF source equipment issue External RF Interface problem such as antenna port The following guidelines are required when the RHU is installed on the 19” rack of Headend room: Intelibs, Inc. Proprietary and Confidential Page 18 19 Locate the equipment with the space for the sufficient airflow to prevent build-up from the overheating. Do not compromise the amount of airflow required for safe operation of the equipment. Verify the power connection and Fiber cables prior to turning on the systems. WARNING: Equipment loading must be verified prior to mounting the equipment on the wall or 19” rack. 3.1.1 General Safety Precautions The following precautions apply to the RHU: The units have no user-serviceable parts. Faulty or failed units are fully replaceable through Intelibs. When the Fiber cable is connected to the equipment, the connectors must be free from the dust and connected according to the cable manufacturer’s instructions. (WARNING: For the safety, DO NOT conduct eye-contact at the connector ends of the fibers or the port of the RHU and SRU unless equipped with protection goggle. Invisible infrared radiation may be present at the front panel of the RHU and SRU. Do not remove the fiber port dust caps unless the port is going to be used. Do not stare directly into a fiber port.) Intelibs, Inc. Proprietary and Confidential Page 19 20 3.2 Installation Tools Table 3-1 Installation tools Torque Wrench1 Torque Wrench 2 ESD Gloves Shrink Tubes LC/UPCOptic Fiber, 10m Ground wire line 5ea of ANT RF Cable Wire Stripper & Cutter Digital Multi-meter Screw Driver Optic connector cleaner Heat Gun Wideband Link Antennas Fixing bolts and nuts 3.3 Item Check List Check that all the following items have been included with the box delivered. If anything is missing, please contact Intelibs. Table 3-2 Item check list RHU RHU 1set AC power cable or PoE Injector AC power cable: 1.5m, 1 ea Mounting bracket PoE Injector 1 ea 3.4 Mounting RHU supports wall mount. The following diagrams illustrate the methods for mounting RHU on a typical wall. Intelibs, Inc. Proprietary and Confidential Page 20 21 Step 1 • • Mark the upper position by using the wall mount bracket drawing paper. Mark the lower position by using the wall mount bracket drawing paper. Figure 3-1 Mark the installation position Step 2 • Install wall mount bracket to the wall using 4 anchor bolts. Figure 3-2 Install the wall mount bracket Step 3 Intelibs, Inc. Proprietary and Confidential Page 21 22 • Install the RHU system as figure below. Figure 3-3 Install the RHU to the installed wall mount bracket 3.5 Link (Donor) Antenna RHU has six antenna ports. 4 ports of them are the ports for 700MHz/850MHz/1900MHz/2100MHz antennas and the other two/four ports are the ports for two/four GPS antennas. Connect each 4.3-10 male antenna cable to the desired antenna port, as Figure below. Intelibs, Inc. Proprietary and Confidential Page 22 23 Figure 3-4 Link/GPS Antenna port Figure 3-5(a) 4Band Link Antenna connection diagram Intelibs, Inc. Proprietary and Confidential Page 23 24 Figure 3-5(b) 2Band Link Antenna and 4CH GPS Antenna connection diagram 3.6 Power cable 1. The case of PoE Input 1) Please release gland cap and put Ethernet cable into cap and water protection rubber ring as following picture. 2) Reassemble cable gland to insert Ethernet cable into RHU enclosure as follows. Intelibs, Inc. Proprietary and Confidential Page 24 25 3) Please connect Ethernet cable to RJ-45 connector of RHU inside as following picture. And you can find LEDs are turned on if Ethernet cable has DC power. Figure 3-6 Power cable connection (PoE type) 2. The case of AC Input Connect MS connector-type power cable which is supplied with RHU to the “AC POWER” port. When connecting the end terminal, align connector at latch and hole position as figure below. Figure 3-7Power cable connection (AC type) Intelibs, Inc. Proprietary and Confidential Page 25 26 3.7 Optic cable RHU provides Six optic ports. Fiber_1 and Fiber_2 are the ports to connect with FHU/SRU/MRU, and Fiber_3 to Fiber_6 are the ports to connect with GPS BEUs. The type of fiber connector is all LC/UPC type connector as figure below. [LC/UPC type fiber connector] Figure 3-8 LC/UPC fiber connector connection Connect the fiber connector to the desired optic port in RHU. When connecting the optic connector, align the connector at latch and hole position, then plug in deeply to get the right connection. Intelibs, Inc. Proprietary and Confidential Page 26 27 Figure 3-9 Fiber cable connection on RHU Intelibs, Inc. Proprietary and Confidential Page 27 28 4 Configuration and Maintenance RHU can be configured in three ways via remote internet connection or local serial port connection. Local management interface through the internet and serial connection. Web interface through the internet SNMP interface through the internet Master Unit is a remote management system that provides SNMP v3 and Web interface, and maintains all functions of iDAS system including configurations, monitoring, and real time alarm reporting. LMT (Local Management Terminal) is local management interface through serial interface. The configuration and maintenance for RHU is performed by accessing RHU through any interfaces. Figure below describes a typical iDAS management system network and the entities and management system network of RHU-iDAS is a part of total DAS management. Red marked part is the management network of RHU iDAS system. Figure 4-1 DAS management network and entities Intelibs, Inc. Proprietary and Confidential Page 28 29 Figure 4-2 RHU-MRU network Figure 4-2 is an example of DAS network using LMT to configure DAS system. Following sections describes how to configure and manage RHU system using LMT via serial/LAN connection or using Web Interface via Internet. 4.1 Configuring RHU using LMT If one of serial connection has been established, LMT is ready to start. Launch the Local Management application by clicking the icon “iDAS” and refer to following information. 4.1.1 LMT GUI (Graphic User Interface) Program This program is a iDAS management program and provides status of all DAS parameter and can control each parameter you want to control. 4.1.2 System Requirement System: Desktop or laptop PC OS: Windows XP or later version. GUI developed under Windows 7. Resolution: 1024 768 or more 4.1.3 How to connect RHU using LMT GUI 1. Double click iDAS.exe ( ) icon to open LMT GUI of RHU. Then you can see following screen. Press “Connect” button in drop down menu of File. Intelibs, Inc. Proprietary and Confidential Page 29 30 2. After following screen is appeared, please select parameters on this screen as refer to the table below. Function Establishing communication between GUI and repeater Method Click Description button in Menu bar of GUI program Combo box to select the com port (COM1, COM2, …) which serial port is Port set up in Laptop Repeater type Select the “iDAS” system Connected device Select “RHU-Master” if you want to connect to RHU unit 4.1.4 Main Window of LMT GUI Intelibs, Inc. Proprietary and Confidential Page 30 31 Section Description Window Title Displays the name and version of management program (GUI) Displays the type of equipment currently connected to the program (RHU or SRU). Menu Bar Presents the working menu for operation. It is associated with tool icons which can activate the tool bar menus. Work Space Status information and control functions are provided with new window screen of RHU and SRU. 4.1.4.1 Status Display of LMT GUI Parameters status of each unit are displayed by color of LED’s and values. LED Alarm: On/Off: indicates ALARM, indicates NORMAL means ON, means OFF Value Units are not displayed. Value displayed in box ( Intelibs, Inc. Proprietary and Confidential Page 31 32 Control The texts of controllable LED or values are displayed in BOLD font. 4.1.4.2 Control Policy of LMT GUI Basically, user can change one item at a time. Click a controllable item (text, or button) To go to Control Mode, press button. Then this button will be changed to Please “enter” key to confirm the control action after changing any parameter you want to change. 4.1.4.3 Description of Manu bar of LMT GUI Menu File View Utility Help Sub Menu Connect Disconnect Exit Packet Debug Firmware Download Table About Function Establishes connection between PC(GUI) and DAS unit Disconnects connection between PC(GUI) and DAS unit Finishes the GUI program. Presents debug packets of communication between DAS unit and GUI program Downloads compressed firmware file to RHU equipment Presents RF/Optic power, temperature compensation, Attenuator table Displays the version information of GUI 4.2 Detail description of Manu bar in GUI 4.2.1 RHU window in GUI screen Intelibs, Inc. Proprietary and Confidential Page 32 33 4.2.2 Parameters details in RHU window Group Description Version: Firmware Version S/N: RHU Serial Number Unit Name: RHU Model Number: Model number of RHU Up Time: operating time and date User Connect: Connection status between Laptop and RHU PWR Alarm: DC power alarm Temp: Current temperature of the inside of unit Upper Temp: set the upper threshold value of temperature(Value) and alarm status (LED) Band screen selection TAB. Down Link monitoring and control item of each band Path ON/OFF: DL Path ON/OFF function PLL: PLL lock alarm indicator IN PWR: DL input power level coming from ANT OUT PWR: DL output power level transmit to OMU IN UPR: DL input upper limit value and alarm IN LWR: DL input lower limit value and alarm ATT 1&2: DL attenuation value for the DL gain control ALC: Auto level limit control value and on/off button AGC : Auto gain control level and on/off set button TC ATT: Temperature compensation Attenuation and On/Off set button Up Link monitoring and control item of each band Path ON/OFF: UL Path ON/OFF function PLL: PLL lock alarm indicator IN PWR: UL input power value OUT PWR: UL Output power value IN UPR: UL input upper limit value and alarm IN LWR: UL input lower limit value and alarm ATT 1 & 2: UL Attenuation value for the UL gain control ALC: Auto level limit control value and on/off set AGC : Auto gain control level and on/off set Shutdown: Auto shutdown level value set TC ATT: Temperature compensation Attenuation and On/Off button Intelibs, Inc. Proprietary and Confidential Page 33 34 Digital Filter monitoring and control item of each band Filter Enable: Digital filter Enable set PLL: FPGA PLL lock alarm Module ID: Digital filter ID information of FPGA. FPGA Ver.: FPGA SW version Isolation: Isolation margin between two antennas IGC LVL: Isolation gain control target margin level set and IGC protection function On / Off IGC ATT: applied attenuation value by IGC function IGC Delay: Delay set for IGC function Filter Info: Digital filter setting information IGC MODE: IGC control Tx only or Tx/Rx simultaneously DL Input/Output level indicator of Digital Filter IN PWR: DL input level at digital filter input port OUT PWR: DL output level at digital filter output port UL Input/Output level indicator of Digital Filter IN PWR: UL input level at digital filter input port OUT PWR: UL output level at digital filter output port Optic parts monitoring and control item of RHU LD0: Transmitting LD power level value from Optic1 port LPWR: Lower alarm limit value of LD0 power level and lower alarm status of LD0 LD1: Transmitting LD power level value from Optic2 port LPWR: Lower alarm limit value of LD1 power level and lower alarm status of LD1 PD0: Receiving PD power level value from Optic1 port LPWR: Lower alarm limit value of PD0 power level and lower alarm status of PD0 PD1: Receiving PD power level value from Optic2 port LPWR: Lower alarm limit value of PD1 power level and lower alarm status of PD1 Intelibs, Inc. Proprietary and Confidential Page 34 35 4.2.3 SRU window in GUI screen 4.2.4 Parameters details in SRU window Group Description Version: Firmware version Type: Type of RU unit Name: Set the Name, ID, Serial No. of iDAS RU User Connect: Connection status between Laptop and SRU PSU: DC alarm status TMPCUR: Current temperature of SRU inside TMPUPR: Value/control of upper threshold of temperature (button) and alarm status (LED) LDPWR: TransmittedLD power level value LDLWR: Lower threshold of LD power level and lower alarm status of LD PDPWR: ReceivedPD power level value PDLWR: Lower threshold of PD power level and lower alarm status of PD Intelibs, Inc. Proprietary and Confidential Page 35 36 SRU parameter screen selection for PCS/Cellular band TAB. Path Use: Path use/not use selection TOTATT: Total attenuation value that is applied to DL path [TOTATT= USRATT + ALCATT + TCATT] USRATT: User attenuation set value for user gain set ALCATT: Attenuation value that controls DL gain automatically to maintain output level under ALC level when HPA output is higher than ALC level. INPWR: Input power level which input to SRU TCATT: Temperature compensation attenuation value and temperature compensation Function ON/OFF HPA On/Off: HPA ON/OFF function OUT PWR: Transmitting output power level from SRU antenna port OUT UPR: Output upper threshold level value and alarm OUT LWR: Output lower threshold level value and alarm ALC: Auto level limit control threshold value and on/off set ASD: Auto level shutdown threshold value and on/off set Protection On/Off: Protection Function ON/OFF to protect SRU from over input power IN UPR: UL(Rx) input upper threshold level value and alarm CW: CH number of pilot signal and ON/OFF function to check UL path gain budget (Pilot signal power level is -60dBm) IN PWR: RVS power value at the LNA output point ATT: User attenuation set value to control UL(Rx) gain OPWR: UL output power level of SRU AGC: Auto gain control level value and Function ON/OFF AGC ATT: Applied attenuation value by AGC function TC ATT: Applied temperature compensation attenuation value and function ON/OFF 4.3 Firmware download Firmware download is performed when system needs to be updated. Downloading improper images (executable file of repeater CPU) may cause harmful damages to equipment. 4.4 Additional function of RHU 4.4.1 ASD (Auto Shutdown) Function 1. If UL output power level of RHU is above the shutdown level longer than 1 second, RHU automatically turns off amplifier to protect undesirable transmission. 2. During shutdown state, monitor RU input power. If the level is below5dBfrom shut down level, turns on UL amplifier automatically. Intelibs, Inc. Proprietary and Confidential Page 36 37 Longer than 1 sec, HPA off 4.4.2 ALC (Auto Limit level Control) Function 1. If UL output power level of RHU reaches the ALC level, RHU decrease the output power to maintain ALC level automatically. 2. When power level goes down under ALC level, RHU increase output power until ALC ATT is 0 by 500msec ~ 1sec speed. ALC Level Power ALC ATT = 0 4.4.3 ALC ATT = δ decrease ALC ATT ALC ATT = 0 AGC (Auto Gain Control) Function 1. In order to have stable output power, RHU has AGC function that can maintain constant output power with setting output level. 2. When input level is decreased RHU increase gain to maintain continuous output level, when Intelibs, Inc. Proprietary and Confidential Page 37 38 input power is increase RHU decrease gain to have same output power automatically. 3. RHU works AGC function by 500msec ~ 1sec speed. ALC Level Power AGC= 0 AGC=δ AGC=0 AGC=0 AGC=δ 4.4.4 Sub-band selection Function RHU can select sub-band up to 10 bands in 65MHz bandwidth using digital filter function. These subband filters have very sharp cut-off characteristics and RHU can provide the signal of selected band of 65MHz BW to coverage area. This digital signal processing function also provide input signal information and antenna isolation information between link and coverage antennas. Step Descriptions If you click “Filter INFO” like following picture You can build up band pass filter up to 10 filters. Input center frequency, number of block for sub-band and click “Add” button, sub-band filter is built up. If you want to erase filter, click “Erase” button. Intelibs, Inc. Proprietary and Confidential Page 38 39 5 Human RF Exposure and Antenna placement guide Actual distance is determined upon gain of antenna used. Please maintain a minimum safe distance of at least 40 cm while operating near the donor antennas with the maximum permissive antenna gain up to 18 dBi and 8.45 dBi for the 1710-1755 MHz frequency band. Note: According to Part 27.50 (d)(4), fixed stations operating in the 1710-1755 MHz band are limited to a maximum antenna height of 10 meters above ground. Intelibs, Inc. Proprietary and Confidential Page 39 40 Limited Warranty Intelibs, Inc. (“Intelibs”) offers a standard two year warranty from defects in material and installation. INTELIBS may at any time exclude from this Agreement any Hardware or Software which (1) has been modified, repaired or serviced by anyone other than Intelibs’ service staff without the prior written approval of Intelibs, (2) has been subjected to unusual physical or electrical stress, whether such stress results from accident, neglect, misuse, lightning, failure of electrical power, air conditioning, humidity control, transportation, the making of specification or configuration changes requested by Customer, or any other cause other than ordinary use, and whether or not such stress is the fault of the Customer, (3) has been purchased from another Vendor and is networked, linked, attached or otherwise intended to work with the System or (4) has been moved from the place of installation. When the system has been improperly modified, repaired, stressed, used or moved as described above, Intelibs may, at its option and subject to the approval of the Customer, perform such corrective work, including any repairs, replacements and adjustments, as are in Vendor’s opinion necessary to restore the System to the condition it would have been in if subjected only to normal wear and tear at the Customer’s expense. Intelibs, Inc. Proprietary and Confidential Page 40 41 Index 850 MHz band .................................................. 18 Bluetooth ......................................................... 30 DAS management network .............................. 30 Duplex .............................................................. 25 Link Antenna connection ........................... 25, 26 LMT .................................................................. 30 Local management interface ........................... 30 MU ..................................................................... 6 Intelibs, Inc. Proprietary and Confidential Optic cable connection .................................... 29 OSP................................................................... 28 RHU .................................................................... 6 RHU Modules ................................................... 11 RU ...................................................................... 6 SC/APC ............................................................. 28 SNMPv3 ........................................................... 30 Web interface .................................................. 30 Page 41 42 Contact: supports@intelibs.com Address: Intelibs, Inc. 1500 Stony Brook road, Stony Brook, NY 11794 Web: http://www.intelibs.com Intelibs, Inc. Proprietary and Confidential Page 42
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : YG Jeong Create Date : 2016:12:17 13:53:07-05:00 Modify Date : 2017:01:03 14:28:14-08:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : YG Jeong Creator Tool : Microsoft® Word 2013 Metadata Date : 2017:01:03 14:28:14-08:00 Producer : Microsoft® Word 2013 Document ID : uuid:82d2e86b-5948-41c4-aecf-1bd75ade957e Instance ID : uuid:d7bf63bc-db44-4022-bd14-8d7c743e3da2 Page Count : 42EXIF Metadata provided by EXIF.tools