Itron 100G Utility Meter Transceiver User Manual 100G Installation Guide
Itron, Inc. Utility Meter Transceiver 100G Installation Guide
Itron >
Contents
Users Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 879677 |
| Application ID | dMhy8dZ2uJFnxuqquD45mw== |
| Document Description | Users Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 206.84kB (2585548 bits) |
| Date Submitted | 2007-12-14 00:00:00 |
| Date Available | 2007-12-19 00:00:00 |
| Creation Date | 2007-12-11 11:05:59 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-12-11 13:53:47 |
| Document Title | 100G Installation Guide |
| Document Creator | Acrobat PDFMaker 7.0.7 for Word |
| Document Author: | Natural Gas Solutions |
Natural Gas Solutions 100G Installation Guide Revision B2 Natural Gas Solutions Identification 100G ERT Module Installation Guide Part number: PUB-0200-001 Revision B2 12/07 ERT Part Numbers: ERG-5000-001, ERG-5000-002, ERG-5000-003, ERG-5000-004, ERG-5000-005, ERG-5000-007, ERG-5000-008 Copyright © 2007 Itron, Inc. All rights reserved. Your company has the right to reproduce this contract document, provided that such reproduction shall be subject to the same use and disclosure restrictions contained in the Confidentiality and Non-Disclosure paragraphs in the Sales Contract. Applicable Patents U.S. Patent Numbers: TBD Canadian Patent Numbers: TBD Transportation Classification The Federal Aviation Administration prohibits operating transmitters and receivers on all commercial aircraft. When powered, the 100G ERT Module is considered an operating transmitter and receiver and cannot be shipped by air. All product returns must be shipped by ground transportation. WARNING! Only authorized Itron personnel should attempt repairs on Itron equipment. Attempts to do so by others might void any maintenance contract with your company. Unauthorized service personnel might also be subject to shock hazard on some Itron equipment if removal of protective covers is attempted. WARNING! Substitution of components may impair intrinsic safety. WARNING! To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing. Compliance Statement This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference that may cause undesirable operation. This device must be permanently mounted such that it retains a distance of 20 centimeters (7.9 inches) from all persons in order to comply with FCC RF exposure levels. Modification and Repairs To ensure FCC compliance and system performance, this device and antenna shall not be changed or modified without the expressed approval of Itron. Any unauthorized modification will void the user’s authority to operate the equipment. Meter Installation/Removal In the event of malfunction, all repairs should be performed by Itron. It is the responsibility of users requiring service to report the need for service to Itron. WARNING! Follow these procedures to avoid injury to yourself or others. • • • The lithium battery may cause a fire or chemical burn if it is not disposed of properly. Do not recharge, disassemble, heat, or incinerate the lithium battery. Keep the lithium battery away from children. Related Documents Endpoint-Link Endpoint Programming Guide (TDC-0744) Trademark Notice Enscan, ERT, Itron, ReadOne, and Endpoint-Link are registered trademarks of Itron, Inc. All other product names and logos in this documentation are used for identification purposes only and may be trademarks or registered trademarks of their respective companies. Suggestions If you have comments or suggestions on how we may improve this documentation, send them to TechnicalCommunicationsManager@itron.com. If you have questions or comments about this application, contact Itron Technical Support: Itron, Inc. • Mail: Itron, Inc. Attention: Customer Care, 2111 N Molter Road, Liberty Lake, WA 99019 • E-mail: support@itron.com • Phone: 1 800 635 8725 Contents Chapter 1 Transmission Modes .................................................................................5 Specifications ......................................................................................................................................5 Meter Compatibility List .......................................................................................................................6 Chapter 2 American Meter Installation .....................................................................13 Installation Prerequisites ...................................................................................................................13 Materials Supplied by Itron .....................................................................................................13 Materials Supplied By You......................................................................................................13 Replacement Screws....................................................................................................14 Preinstallation Preparations ....................................................................................................14 Installing the 100G ERT Module .......................................................................................................14 Remove the Index...................................................................................................................14 Assemble the ERT Module .....................................................................................................17 Program the ERT Module .......................................................................................................22 Attach the ERT Module to the Meter ......................................................................................23 Chapter 3 Sensus Meter Installation.........................................................................29 Installation Prerequisites ...................................................................................................................29 Materials Supplied by Itron .....................................................................................................29 Materials Supplied By You......................................................................................................29 Replacement Screws....................................................................................................29 Preinstallation Preparations ....................................................................................................30 Installing the 100G ERT Module .......................................................................................................30 Remove the Existing Index .....................................................................................................30 Assemble the ERT Module .....................................................................................................32 Program the ERT ....................................................................................................................35 Attach the ERT to the Meter ...................................................................................................36 Chapter 4 Actaris Meter Installation .........................................................................41 Installation Prerequisites ...................................................................................................................41 Materials Supplied by Itron .....................................................................................................41 Materials Supplied By You......................................................................................................41 Replacement Screws....................................................................................................42 Preinstallation Preparations ....................................................................................................42 Installing the 100G ERT Module .......................................................................................................42 Remove the Index...................................................................................................................42 Assemble the ERT Module .....................................................................................................44 Program the ERT ....................................................................................................................47 Attach the ERT Module to the Meter ......................................................................................48 Attaching the ERT Module to Flat-faced Model 1A Meters ....................................................50 Natural Gas Solutions 100G Installation Guide iii Contents Chapter 5 American/Actaris Commercial Meter Installation...................................55 Installation Prerequisites ...................................................................................................................55 Materials Supplied by Itron .....................................................................................................55 Materials Supplied By You......................................................................................................56 Replacement Screws....................................................................................................56 Preinstallation Preparations ....................................................................................................56 Installing the 100G ERT Module .......................................................................................................57 Program the ERT ....................................................................................................................61 Installing 100G ERT Module on Actaris ............................................................................................69 Chapter 6 National/Lancaster Meter Installation......................................................73 Index Compatibility ............................................................................................................................73 Installation Prerequisites ...................................................................................................................73 Materials Supplied By Itron .....................................................................................................73 Materials Supplied By You......................................................................................................73 Replacement Screws....................................................................................................73 Preinstallation Preparations ..............................................................................................................74 Installing the 100G ERT Module .......................................................................................................74 Program the ERT ....................................................................................................................79 iv Natural Gas Solutions 100G Installation Guide CHAPTER 1 The 100G is Itron's latest gas encoder-receiver-transmitter (ERT®) module. ERT modules are radio-frequency (RF) devices that transmit meter data. The RF meter data can be received by a reading device that is within transmission distance of the ERT. Itron's 100G ERT module has increased output power over legacy gas ERT modules for increased RF transmission distance. This installation guide shows you how to install the 100G ERT Module on meters from a variety of manufacturers. To ensure you have a meter that is compatible with the 100G ERT Module, refer to the Meter Compatibility List on page 6. Transmission Modes Once installed, the 100G ERT module has three available transmission modes: • Fixed Network Mode In this mode, a 100G ERT module transmits a high-powered RF message every 60 seconds. Output power in this mode is 250 milliwatts or +24dBm; expected battery life is 20 years. • Mobile and Handheld Mode In this mode, a 100G ERT module transmits a medium-powered RF message every 15 seconds. Output power in this mode is 10 milliwatts or +10dBm; expected battery life is 20 years. • (Optional) Hard to Read Mobile and Handheld Mode In this mode, a 100G ERT module transmits a high-powered RF message every 30 seconds. Output power in this mode is 250 milliwatts or +24dBm; expected battery life decreases to 15 years in this mode, however. The Hard to Read Mobile and Handheld Mode should only be used for 100G ERT modules that are difficult to read under normal conditions, such as modules installed on roof tops or in sub-basements. An FCC license is not required to read 100G ERT modules. Specifications The functional and operational specifications for the 100G are listed below. Functional Specifications Description Power Source Two "A" cell lithium batteries Tamper Detection Tilt tamper and magnetic tamper FCC Compliance Part 15 certified Industry Canada Compliance RSS-210 certified Measurement Canada Approval Yes Intrinsically Safe per UL Class I, Division 1, Groups C and D Product Identification Numeric and barcoded ERT module type and serial number Natural Gas Solutions 100G Installation Guide Chapter 1 American Meter Installation Functional Specifications Description Construction Materials Gray polycarbonate back plate with Santoprene® gasket; clear polycarbonate front cover; encapsulated electronics Operational Specifications Description Operating Temperatures -40° to 158° F (-40° to +70° C) Operating Humidity 5 to 95percent relative humidity Program Frequency 908 MHz Transmit Frequency Spread spectrum 908 to 924 MHz ISM band Data Integrity Verified in every data message Meter Compatibility List The following meters are compatible with the 100G. Due to continuous research, product improvements, and enhancements, Itron reserves the right to change this list at any time. To ensure you have the latest Meter Compatibility list available, contact your Itron representative. Mfg. Model American/ Canadian W75AL American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian Desc AL-175 Comments ERT Type ERT Part No. Residential Aluminum case Meters Only 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 Residential AC-175 Residential AT-175 Residential ALC-175 Residential AT-210 AL-225 Class Residential Canada only Residential Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Natural Gas Solutions 100G Installation Guide Meter Compatibility List American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian American/ Canadian AL-250 Residential AR-250 Residential AC-250 Residential AT-250 Residential AM-250 Residential AL-310 Residential AL-350 Residential AT-350 Residential AL-425 Residential AC-630 5B 225 35B 60B 80B Residential Aluminum case Iron case Iron case Iron case Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Aluminum case meters only Commercial Commercial Commercial 500B Iron case Commercial Natural Gas Solutions 100G Installation Guide Aluminum case meters only Commercial Iron case AL1000 Aluminum case meters only Residential 250B AL800 Aluminum case meters only Commercial Commercial Must have front reading index. 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-501 40GB PR* ERG-1006-503 100G ERG-5000-001 40GB ERG-1006-515 100G ERG-5000-007 40GB ERG-1006-515 100G ERG-5000-007 40GB ERG-1006-515 100G ERG-5000-007 40GB ERG-1006-515 100G ERG-5000-007 40GB ERG-1006-515 100G ERG-5000-007 Aluminum case meters only 40GB ERG-1006-515 100G ERG-5000-007 Aluminum case meters only 40GB ERG-1006-515 100G ERG-5000-007 Chapter 1 American Meter Installation American/ Canadian American/ Canadian American/ Canadian American/ Canadian AL1400 Commercial Aluminum case meters only 40GB ERG-1006-515 100G ERG-5000-007 AL2300 Commercial Aluminum case meters only 40GB ERG-1006-515 100G ERG-5000-007 AL3000 Commercial Aluminum case meters only 40GB ERG-1006-515 100G ERG-5000-007 Aluminum case meters only 40GB ERG-1006-515 100G ERG-5000-007 Compatible with 2 foot drive index; 1 foot drive has 24 teeth and is not compatible. 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 AL5000 R-175 Commercial 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell R-200 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell RT-200 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell RT-230 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell R-275 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell RT-275 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell R-315 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell 250 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell 310 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell S-110 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell S-200 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell S-175 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell RT-100 Sensus/Invensys/ Equimeter/Rockwell 18 Tooth Residential Natural Gas Solutions 100G Installation Guide Meter Compatibility List S-190 11 Tooth 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-504 40GB PR* ERG-1006-507 100G ERG-5000-002 40GB ERG-1006-505 40GB PR* ERG-1006-509 100G ERG-5000-004 40GB ERG-1006-505 40GB PR* ERG-1006-509 100G ERG-5000-004 40GB ERG-1006-506 40GB PR* ERG-1006-508 100G ERG-5000-003 40GB ERG-1006-506 40GB PR* ERG-1006-508 100G ERG-5000-003 Sprague/Schlumberger / Actaris Direct Read indexes can not be used 40GB ERG-1006-512 100G ERG-5000-006 Sprague/Schlumberger / Actaris Direct Read indexes can not be used 40GB ERG-1006-512 100G ERG-5000-006 Sprague/Schlumberger / Actaris Direct Read indexes can not be used 40GB ERG-1006-512 100G ERG-5000-006 Index boxes with 3 mounting holes 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 Residential Sensus/Invensys/ Equimeter/Rockwell S-120 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell T-120 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell T-110 11 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell R-415 18 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell RT-360 18 Tooth Residential Sensus/Invensys/ Equimeter/Rockwell Sensus/Invensys/ Equimeter/Rockwell Sensus/Invensys/ Equimeter/Rockwell National/ Lancaster National/ Lancaster National/ Lancaster Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague MR8 (R275 Metric) 16 Tooth MR12 (R415 Metric) 16 Tooth 175 Residential Residential Residential U175 UL175 Residential 250 Residential 175 175 WC 175 Combination 3 Hole index box 3 Hole index box 3 Hole index box 210 Natural Gas Solutions 100G Installation Guide Residential Residential Residential Residential Index boxes with 3 mounting holes Index boxes with 3 mounting holes Chapter 1 American Meter Installation Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague 240 Canadian Version of 250 240 Combination Residential 240 240 Residential Residential 1 Hole Cover Residential Requires Itron 1A Adapter P/N CFG0015-001Kit 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 + CFG-0015-001 40GB PR* ERG-1006-513 + CFG-0015-001 100G ERG-5000-005 + CFG-0015-001 Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague Schlumberger/ Sprague 240 2 Hole Cover 250 Residential 40GB Requires Itron 2 Hole Cover. P/N MLD-0003-031 Residential 250 WC Residential 250 Combination Residential 1A Residential Requires Itron 1A adapter kit, CFG0015-001. 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 + CFG-0015-001 40GB PR* ERG-1006-513 + CFG-0015-001 100G ERG-5000-005 + CFG-0015-001 Actaris/ Schlumberger METRIS 250 3 Hole Index Box Residential Index boxes with 3 mounting holes Slant-faced Schlumberger/ Sprague Actaris/ Schlumberger Actaris/ Schlumberger Actaris/ Schlumberger 10 400 400A 675A 800A Residential Residential Commercial Commercial Slant-faced 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 40GB ERG-1006-511 40GB PR* ERG-1006-513 100G ERG-5000-005 Requires Actaris adapter p/n 80005901; purchase from Actaris 40GB ERG-1006-515 100G ERG-5000-007 Requires Actaris adapter p/n 80005901; purchase from Actaris 40GB ERG-1006-515 100G ERG-5000-007 Slant-faced Natural Gas Solutions 100G Installation Guide Meter Compatibility List Actaris/ Schlumberger 1000A Commercial Requires Actaris adapter p/n 80005901; purchase from Actaris 40GB ERG-1006-515 100G ERG-5000-007 * PR — Passive Radiator Natural Gas Solutions 100G Installation Guide 11 Chapter 1 American Meter Installation 12 Natural Gas Solutions 100G Installation Guide CHAPTER 2 American Meter Installation This chapter shows you how to install a 100G ERT Module on an American meter. Before installing the 100G ERT Module, verify that you have: • A compatible meter shown in the Meter Compatibility List. • A compatible index. Itron 100G ERT Modules can be used with standard dial and direct read (odometer) indexes. • The list of materials defined under Installation Prerequisites in this chapter. Installation Prerequisites The following items are required to install the Itron 100G ERT Module. Materials Supplied by Itron The following items are supplied by Itron: • 100G ERT Modules • New tamper seals Materials Supplied By You You must supply the following items to install, initialize, and check the 100G ERT Module on the meter. • Small and medium flat-blade or Phillips screwdrivers Used to remove and tighten index and index-cover screws. • Side-cutting plier/wire snips Used for cutting wire seals, if necessary. • Small putty knife Used to remove all traces of old gaskets from the meter. • Meter seals, wire seals, and seal press Used to secure the meter from tampering, if necessary. • 11/32-inch nut driver or other blunt tool Used to securely seat new tamper plugs over screw holes. • Replacement screws Used to mount 100G ERT Module assembly to meter and index to module assembly backplates. • FC200SR with EndPoint-Link or EndPoint-Link Pro software Used to program and check ERT assembly. Natural Gas Solutions 100G Installation Guide 13 Chapter 2 American Meter Installation Replacement Screws Replacement screws used in this procedure are shown below. For mounting 100G ERT Module assemblies on meters: • Use 1/4 - 20 x 5/8-inch slotted, Fillister head screws. For mounting indexes on 100G ERT Module backplates: • Use 8 - 32 x 3/16-inch slotted, round head screws. Preinstallation Preparations Before installing the 100G ERT Module on a meter, verify that: • All Itron gas modules are 100G ERT Modules for your brand of gas meters. • The model numbers of all meters on which the 100G ERT Modules will be installed are included in the Meter Compatibility List. Installing the 100G ERT Module There are four major steps to installing the 100G ERT Module on a meter: • Remove the index • Assemble the 100G ERT Module • Program the 100G ERT Module • Attach the 100G ERT Module to the meter. NOTE Properly dispose of all unused screws, old index covers, gaskets, tamper seals, and other left-over materials. Do not leave any materials on customer premises. Remove the Index The first major step when installing a 100G ERT Module on an meter is to remove the index from the meter. To remove the index 1. Remove any tamper seals from the meter. 14 Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module 2. Detach the index cover from the meter by removing the four screws holding it in place. 3. Examine the index cover screws you just removed. Verify that they are 5/8-inch long and are not corroded. • If the screws are 5/8-inch long, and are not corroded, keep them for later use. • If the screws are an incorrect length or are corroded, dispose of them properly. Use 1/4 - 20 x 5/8-inch screws as described in Replacement Screws on page 14 instead. TIP You can use the index cover you just removed as a temporary storage location for screws. NOTE Dispose of the index cover properly when finished with the installation procedure. Do not leave it on customer premises. 4. Unscrew one index mounting screw completely. Hold one hand beneath the index to catch the screw when it falls out of the index assembly. If it does not fall out by itself, be sure to remove it. 5. Unscrew the other index mounting screw. Natural Gas Solutions 100G Installation Guide 15 Chapter 2 American Meter Installation While removing this screw, pull the index away from the meter to keep its backplate (1) against the back of the screwhead (2). This prevents the screw from falling out prematurely. 6. Remove the screw from the index once it is completely free of its hole. 7. Set the index aside for the moment. Place it where it will not be damaged; get filled with dirt, rain, or snow; or fall to the ground or floor. The index will be used later in this procedure. 8. Examine the index screws you just removed. Verify that they are 3/16-inch long and are not corroded. • If the screws are 3/16-inch long and are not corroded, keep them for later use. • If the screws are an incorrect length or are corroded, dispose of them properly. Use 8 - 32 x 3/16-inch screws as described in Replacement Screws on page 14 instead. 9. Use a putty knife or similar object to completely remove the old index gasket from the meter (if applicable). All traces of the gasket must be removed before the ERT can be installed. 16 Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module Assemble the ERT Module When installing a 100G ERT Module, the next major step is to create the endpoint module assembly by combining the endpoint backplate and cover with the meter index. Follow the procedure below to do so. To assemble the ERT module 1. Obtain a new 100G ERT Module. 2. Separate the ERT module backplate (1) from the cover (2). 3. Set the new ERT index cover aside for the moment. Place it where it will not be damaged; get filled with dirt, rain, or snow; or fall to the ground or floor. The ERT index cover will be used later in this procedure. IMPORTANT Before continuing with the installation, note the following information about American Meter indexes: Natural Gas Solutions 100G Installation Guide 17 Chapter 2 American Meter Installation • Index wrigglers on one-foot meters have drive slots. • Index wrigglers on two-foot meters have drive posts. • An index may have mounting screw holes. • An index may have mounting screw slots. If the index has mounting screw slots, skip steps 4 and 5 below. Continue with step 6. 18 Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module If the index has mounting screw holes, perform steps 4 and 5 below, and then skip steps 6 and 7. 4. If the index has mounting screw holes, place an index mounting screw (1) in the righthand mounting screw hole (2). Use one 8 - 32 3/16-inch screw for this step (you can use an original mounting screw if it was the correct size and not corroded; otherwise, use the correct size replacement screw). 5. Attach the screw to the ERT backplate's right-hand index mounting post just far enough to hold the screw and end of the index in place. 6. If the index has mounting screw slots, screw an index mounting screw (1) one to two turns into the ERT backplate's right-hand index mounting post (2). Use one 8 - 32 x 3/16-inch screw for this step (you can use an original mounting screw if it was the correct size and not corroded; otherwise, use the correct size replacement screw). Natural Gas Solutions 100G Installation Guide 19 Chapter 2 American Meter Installation 7. Place the index mounting screw slot under the screw head. Do not tighten the screw yet. 8. Attach the wriggler to the index and backplate. • If the index wriggler has a drive slot (1), place the backplate wriggler's drive post (2) in the index wriggler's drive slot. 20 Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module • If the index wriggler has a drive post (1), place the index wriggler's drive post in the backplate wriggler's drive slot (2). 9. Install and tighten the left-hand index mounting screw (for indexes with either mounting screw slots or holes). Use one 8 - 32 x 3/16-inch screw for this step (you can use an original mounting screw if it was the correct size and not corroded; otherwise, use the correct size replacement screw). 10. Tighten the right-hand index mounting screw. 11. Slide the ERT cover (1) over the index and backplate (2). Next, program the ERT module. Natural Gas Solutions 100G Installation Guide 21 Chapter 2 American Meter Installation Program the ERT Module The ERT must be programmed using the FC200SR with EndPoint-Link software. See the Endpoint-Link ERT Programming Guide (TDC-0411) for more information. IMPORTANT You must perform the following programming procedure for the ERT module to function properly. When programming the ERT module, you must take note of the drive rate shown on the index of the meter. Program the meter based on the drive rate shown on the index. American meters. Examples of 1-foot (1) and 2-foot (2) drive rates are shown below (a 0.05 cubic metre drive rate is not shown). Be sure to program the ERT based on the drive rate indicated on the index. To program the ERT module 1. Using the FC200SR, program the reading of the index that was on the meter into the ERT module assembly. 22 Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module • For initial programming, hold the FC200SR approximately 1 foot away from the 100G. • For reprogramming (30 days or more past initial programming), hold the FC200SR approximately 4 to 5 feet away from the 100G. Be sure to program the 100G to the correct mode for the reading technology what will be used (for example, Fixed Network Mode, Mobile/Handheld Mode, or Hard to Read Mobile/Handheld Mode). In Endpoint-Link Pro v5.0, you will have access to the one mode that was defined by your system administrator. During programming, the 100G ERT module is programmed to the nearest 100 cubic feet; the last two digits (the tens and units) are programmed as zeros (0). Once programming is complete, however, the ERT module assembly can be read to the nearest cubic foot. 2. Slowly turn the ERT module drive wriggler two turns in the direction indicated on the index drive rate. This lets you verify the ERT module is counting properly after assembly. IMPORTANT Do not turn the drive wriggler faster than one turn per second. 3. Read the ERT module assembly using the FC200SR. Consult the EndPoint-Link ERT Programming Guide (TDC-0411) or other applicable instructions for details on how to read an ERT. • If this reading is higher than the one you programmed in step 1 above, the ERT module assembly is counting correctly. • If the ERT module assembly reading is not higher than what was programmed in step 1, replace the ERT module with a new one. Attach the ERT Module to the Meter After the endpoint has been programmed and is reading correctly, it must be attached to the meter. Follow the steps below to do this. Natural Gas Solutions 100G Installation Guide 23 Chapter 2 American Meter Installation To Attach the ERT to the Meter 1. 5B 225 Meters Only If you are installing the ERT on a 5B 225 aluminum meter, cut 1/16-inch off each post of the ERT wriggler to prevent it from rubbing on the face of the nut that holds the wriggler in place. If you are not installing on a 5B 225 meter, continue to step 2 below. 2. Set the wriggler to the desired position for mounting the ERT module assembly to the meter. • 24 For One-Foot Meters: Align the ERT module assembly wriggler with the meter drive post (as shown below). Make sure the ERT wriggler is perpendicular to the meter drive post. Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module • For Two-Foot Meters: Align the ERT module assembly wriggler with the meter drive slot (as shown below). It is acceptable for the pin on the 100G wriggler to be installed inside or outside of the meter drive slot. For ease of assembly, Itron recommends that the pin on the 100G wriggler be installed outside of the meter drive slot. 3. Gently place the ERT module assembly on the meter. Align the four screw holes on the ERT module assembly with the holes on the meter. 4. Turn each screw 1/4 to 1/2 turn after it contacts the cover. Use the 1/4 - 20 x 5/8-inch screws for this step. You can use the original mounting screws if they were the correct size and not corroded, otherwise, use the correct size Replacement Screws on page 14. IMPORTANT Meter manufacturers should torque the mounting screws 15 to 20 inch-pounds. Natural Gas Solutions 100G Installation Guide 25 Chapter 2 American Meter Installation 5. Place a new tamper seal over two of the mounting screws as shown below. 6. Press the new tamper seals into place using the 11/32-inch nut driver (or another similar blunt tool). 7. Complete any necessary paperwork. Make sure no excess material is left on the customer premises; dispose of it properly. 26 Natural Gas Solutions 100G Installation Guide Installing the 100G ERT Module The ERT is now installed on the meter. Natural Gas Solutions 100G Installation Guide 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : Yes Page Mode : UseOutlines XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Company : AuthorIT Software Corporation Ltd. Source Modified : D:20071211182208 Creator Tool : Acrobat PDFMaker 7.0.7 for Word Modify Date : 2007:12:11 13:53:47-06:00 Create Date : 2007:12:11 11:05:59-08:00 Metadata Date : 2007:12:11 13:53:47-06:00 Document ID : uuid:4af0a9a5-6d33-4d29-8f70-5a7e0b53f126 Instance ID : uuid:1212d7d7-a47c-440a-9790-f4f257e34bd3 Version ID : 3 Format : application/pdf Title : 100G Installation Guide Creator : Natural Gas Solutions Description : Natural Gas Solutions Subject : Revision B2 Headline : Natural Gas Solutions Has XFA : No Page Count : 27 Page Layout : OneColumn Author : Natural Gas Solutions Keywords : Revision, B2EXIF Metadata provided by EXIF.tools