Itron 24GZR AMR Transceiver Device For Utility Meters User Manual Users Manuel Chp One and Two
Itron, Inc. AMR Transceiver Device For Utility Meters Users Manuel Chp One and Two
Itron >
Contents
- 1. Users Manuel Chp One and Two
- 2. Users Manuel Chp Three
- 3. Users Manuel Chp Five Through Seven
Users Manuel Chp One and Two
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1174036 |
| Application ID | +4wabefAyJCvK+QwVQRKqg== |
| Document Description | Users Manuel Chp One and Two |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 58.65kB (733145 bits) |
| Date Submitted | 2009-09-23 00:00:00 |
| Date Available | 2009-09-25 00:00:00 |
| Creation Date | 2009-09-09 06:43:25 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2009-09-23 09:46:47 |
| Document Title | 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount |
| Document Creator | Acrobat PDFMaker 9.1 for Word |
| Document Author: | TDC-0838-000 |
Natural Gas Solutions 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount TDC-0838-000 Identification 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 09/08/2009 TDC-0838-000 Preliminary 2.4GZ Gas Module Endpoint part numbers: OWG-5001-501, OWG-5001-502, OWG-5001-503, OWG-5001-504 OWG-5002-501, OWG-5002-502, OWG-5002-503, OWG-5002-504 Copyright © 2009 Itron, Inc. All rights reserved. Trademark Notice Itron is a registered trademark of Itron, Inc. All other product names and logos in this documentation are used for identification purposes only and may be trademarks or registered trademarks of their respective companies. Suggestions If you have comments or suggestions on how we may improve this documentation, send them to TechnicalCommunicationsManager@itron.com If you have questions or comments about the software or hardware product, contact Itron Technical Support: Contact • Internet: www.itron.com • E-mail: support@itron.com • Phone: 1 800 635 8725 Safety Approvals Intrinsically safe per UL Class I, Division 1, Groups C & D Applicable Patents U.S. Patent Numbers: 4,614,945; 4,753,169; 4,768,903; 4,799,059; 4,867,700 Canadian Patent Numbers: 1,254,949; 1,267,936; 1,282,118 Compliance Statement This device complies with Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference that may cause undesirable operation. This device must be permanently mounted such that it retains a distance of 20 centimeters (7.9 inches) from all persons in order to comply with FCC RF exposure levels. Compliance Statement This equipment has been tested and found to comply with the limits, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following conditions: • This device may not cause interference. • This device must accept any interference that may cause undesired operation of the device. Compliance Statement This equipment complies with policies RSS-210 and RSS-GEN of the Industry Canada rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Transportation Classification The Federal Aviation Administration prohibits operating transmitters and receivers on all commercial aircraft. When powered, the 2.4GZ OpenWay Remote Mount Module is considered an operating transmitter and receiver and cannot be shipped by air. All product returns must be shipped by ground transportation. Modifications and Repairs To ensure system performance, this device and antenna shall not be changed or modified without the expressed approval of Itron. Any unauthorized modification will void the user's authority to operate the equipment. Meter Installation/Removal In the event of malfunction, all repairs should be performed by Itron. It is the responsibility of users requiring service to report the need for service to Itron. Warning Follow these procedures to avoid injury to yourself or others: • • • • The lithium battery may cause a fire or chemical burn if it is not disposed of properly. Do not recharge, disassemble, heat above 100º Celsius (212º Fahrenheit), or incinerate the lithium battery. Keep the lithium battery away from children. Replace the lithium battery only with batteries meeting Itron specifications. Any other battery may cause a fire or explosion. Warning Only authorized Itron personnel should attempt repairs on Itron equipment. Attempts to do so by others might void any maintenance contract with your company. Unauthorized service personnel might also be subject to shock hazard on some Itron equipment if removal of protective covers is attempted. Warning To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing. Warning Substitution of components may impair intrinsic safety. Document Conventions The following documentation conventions are used: Caution A Caution warns the user that failure to heed the information in the note could result in loss of data. Be sure to carefully read a Caution note and heed the advice/instructions. Warning A Warning alerts you of potential physical harm to the user or hardware. It is critical that you pay strict attention to WARNING notes, read the information carefully, and heed the advice, instructions. Tip A Tip provides the user with extra hints/tips to make a task easier to perform or a concept easier to understand. Note A Note supplies generic information to the user. The information could be ignored and the user could continue with a task without suffering any adverse consequences. Contents Chapter 1 2.4GZ OpenWay Remote Mount Gas Module Installation ........................ 1 Transmission Modes ........................................................................................................................... 1 Programming Modes ........................................................................................................................... 2 Specifications ...................................................................................................................................... 3 Related Documents .................................................................................................................. 3 2.4GZ OpenWay Remote Mount Gas Module Meter Compatibility List..............................................4 Installation Prerequisites ..................................................................................................................... 8 Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module .................... 9 Installation Options .............................................................................................................................. 9 Mounting Screw Specifications ................................................................................................. 9 Mounting Installation Considerations ................................................................................................10 Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Pipe..................................11 Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Wall or Other Flat Vertical Surface ............................................................................................................18 Chapter 3 Rotary Meter Installation .......................................................................... 23 Required Installation Materials Available from Itron ..........................................................................24 Connecting the 2.4GZ OpenWay Remote Mount Gas Module to the Rotary Meter Cable ..............25 ® Programming 2.4GZ OpenWay Remote Mount Gas Module for Dresser ROOTS Rotary Meters .30 B3, LMMA & S3A CTR/TC Meter Pulse Rates for Remote Module Programming ...........................30 Installing the 2.4GZ OpenWay Remote Mount Gas Module to the Elster American Meter RPM Series Rotary Meter ..........................................................................................................................32 Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Pipe ............................................37 Installing the 2.4GZ OpenWay Remote Mount Gas Module to the Romet Electronically ® Compensated Meter (ECM2 )..........................................................................................................38 ® Connecting the 2.4GZ OpenWay Remote Mount Gas Module to the Romet ECM2 Meter ............39 Chapter 4 Mercury Electronic Volume Corrector Installation ................................. 43 Installation Prerequisites ...................................................................................................................43 Installation Overview .........................................................................................................................44 Programming the Mercury Instrument Corrector...............................................................................45 Code Settings..........................................................................................................................45 Wiring the Endpoint to the Corrector .................................................................................................46 Wiring Dual Endpoints to a Mercury Instrument Corrector ...............................................................48 Required Tools .......................................................................................................................49 Programming the 2.4GZ OpenWay Remote Mount Gas Module Assembly.....................................51 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Contents Chapter 5 Diaphragm Meter Installation ................................................................... 53 Tools and Materials Supplied By You ...............................................................................................53 Materials Available from Itron ............................................................................................................54 Replacement Gaskets .............................................................................................................55 Installing the 2.4GZ OpenWay Remote Mount Gas Module .............................................................56 Installing 2.4GZ OpenWay Remote Mount Gas Module Encoders...................................................57 Chapter 6 Dattus Meter Installation ........................................................................... 67 Installation Prerequisites ...................................................................................................................67 Programming the Dattus Meter .........................................................................................................67 Installation Overview ...............................................................................................................68 Installing the 2.4GZ OpenWay Remote Mount Gas Module to the Itron Dattus Meter 68 Direct Mounting the 2.4GZ OpenWay Remote Mount Gas Module to the Dattus Meter .............................................................................................................................69 Connecting the 2.4GZ OpenWay Remote Mount Gas Module to a Dattus meter .......70 Mounting the 2.4GZ OpenWay Remote Mount Gas Module........................................71 Programming the 2.4GZ OpenWay Remote Mount Gas Module Assembly ................72 Chapter 7 Sensus Sonix Meters ................................................................................ 75 Programming the Sensus Sonix Meter .............................................................................................75 Adjusting the Pulse Output for Sonix 600 and 880 Meters .....................................................75 Installing the 2.4GZ OpenWay Remote Mount Gas Module with Sensus Sonix Meters ..................75 Sensus Sonix2000 Pulse Output Wiring .................................................................................76 Direct Mounting the 2.4GZ OpenWay Remote Mount Gas Module to the Sonix Meter .........76 Connecting the 2.4GZ OpenWay Remote Mount Gas Module to a Sensus Sonix 600 or 880 Meter .......................................................................................................................................78 Programming the 2.4GZ OpenWay Remote Mount Gas Module Assembly ..........................79 vi TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount CHAPTER 1 2.4GZ OpenWay Remote Mount Gas Module Installation 2.4GZ OpenWay Remote Mount Gas Modules are radio-frequency (RF) devices operating over the 2.4 GHz frequency. The 2.4GZ OpenWay Remote Mount Gas Modules communicate with ZigBee®-compliant electric meters to transmit gas consumption data bytes. Modules store 40 days of hourly intervals and are programmed to bubble-up every 12 or 24 hours. Alternatively, the 2.4GZ OpenWay Remote Mount Gas Module can be awakened with an Itron magnet for programming or for binding to an OpenWay electric meter. When 2.4GZ Openway Gas Modules are installed alongside Itron OpenWay electric meters, the OpenWay solution for combo gas and electric utilities provides unprecedented management flexibility. This installation guide provides step-by-step instructions for installing the 2.4GZ OpenWay Remote Mount Gas Module on a wide variety of meters. 2.4GZ OpenWay Remote Mount Gas Module compatible meters are listed in the Meter Compatibility List. Transmission Modes The 2.4GZ OpenWay Remote Mount Gas Module can be set to transmit to Standard, Daily or Hourly Mode. • Standard Mode - The 2.4GZ Remote Mount Gas Module transmits the current index read and Daily Freeze Time read; Daily Freeze Time read is programmable for any hour. • Daily Mode - In addition to transmitting Standard Mode information, the 2.4GZ Remote Mount Gas Module transmits 40 days of daily interval data based on Daily Freeze Time reads. • Hourly Mode - In addition to transmitting Standard Mode information, the 2.4GZ Remote Mount Gas Module transmits the last 24 hourly intervals. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Chapter 1 2.4GZ OpenWay Remote Mount Gas Module Installation Programming Modes The 2.4GZ OpenWay Gas Module is programmed or reprogrammed to Normal, Sleep, or Doze Mode as defined in the configuration file. The table below describes these modes. Mode Description/Use Case Radio Metering (counting) How to Enter this Mode How to Exit this Mode Normal Normal Operating Mode. Used for Field Programming when electric meters are present or being installed. On On Mag Swipe or Programmer Programmer (can reprogram to any mode specified) Sleep For Shipping or Storage of modules Off Off Programmer Mag Swipe (to normal) or Programmer (to specified) Uses the least amount of battery current since the module does not communicate with the electric meter. Snooze Pre-program modules and deploy so they try to join the network automatically when they are installed in the field. The flow of gas or Mag Swipe triggers the module to change to Normal Mode. Off On Programmer Mag Swipe (to normal) Programmer (to specified) or Count Increment (to normal) Doze Pre-program meters in factory and deploy so they do not try to join the network when installed (for example, install gas before electric OR in factory counts will be added after programming and user does not want the radio turned on). Off On Programmer Mag Swipe (to normal) or Programmer (to specified) TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Specifications Specifications The following tables list the functional and operational specifications for the 2.4GZ OpenWay Remote Mount Gas Module. Functional Specifications Power Source Description Two "A" cell lithium batteries Tamper Detection Tilt tamper and magnetic tamper FCC Compliance Part 15 certified Industry Canada Compliance RSS-210 certified Measurement Canada Approval Pending Intrinsic Safety UL Class I, Division 1, Groups C and D Product Identification Numeric and bar coded and serial number Construction Materials Gray polycarbonate housing and back plate with encapsulated electronics Operational Specifications Operating Temperatures Description -40° to 158° F (-40° to +70° C) Operating Humidity 5 to 95% relative humidity Frequency Band 2.405 to 2.475 GHz ISM band Modulation Direct Sequence Spread Spectrum Data Integrity Verified in every data message Related Documents Document Title Gas Endpoint Meter Compatibility List Document Part Number PUB-0117-002 Gas Endpoint Ordering Guide PUB-0117-001 2.4GZ OpenWay Remote Mount Gas Module Specification Sheet Publication 100818SP-XX Endpoint Link Programming Guide TDC-0744 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Chapter 1 2.4GZ OpenWay Remote Mount Gas Module Installation 2.4GZ OpenWay Remote Mount Gas Module Meter Compatibility List This table lists meters compatible with the 2.4GZ OpenWay Remote Mount Gas Module. Due to continuous research, product improvements, and enhancements Itron reserves the right to change this list without notice. Meter Model Description Class Comments Module Type Module Part Number Elster/American/ Canadian 10 Metric (10B) Iron case Residential IPP* 2.4GZ OpenWay Remote OWG-5001-501 SEP* 2.4GZ OpenWay Remote OWG-5002-501 IPP* 2.4GZ OpenWay Remote 5' cable OWG-5001-502 SEP* 2.4GZ OpenWay Remote 5' cable OWG-5002-502 IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-503 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-503 2.5' cable with encoder Sensus/Invensys National/ Lancaster Sonix 12,16,25,57, 600,880,2000 All meters Pulser Metric Cubic foot Where direct mount is not compatible Commercial Residential IPP* 2.4GZ OpenWay Remote OWG-5001-501 SEP* 2.4GZ OpenWay Remote OWG-5002-501 IPP* 2.4GZ OpenWay Remote OWG-5001-501 SEP* 2.4GZ OpenWay Remote OWG-5002-501 2.4GZ OpenWay Remote 2.4GZ OpenWay Remote OWG-5001-501 IPP* 2.4GZ OpenWay Remote OWG-5001-501 SEP* 2.4GZ OpenWay Remote OWG-5002-501 2.5' foot cable with encoder Itron/Actaris Schlumberger/ Sprague 1A Where direct mount is not compatible Residential 2.5' cable with encoder Itron/Actaris/ Schlumberger/ Sprague Metris 250 Straight Face meter Residential IPP* SEP* OWG-5002-501 2.5' cable with encoder Schlumberger/ Sprague 400 #3 flat-face meter 2.5' cable with encoder TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 2.4GZ OpenWay Remote Mount Gas Module Meter Compatibility List Meter Model Description Class Itron/Actaris/ Schlumberger/ Sprague 675, 1000 Front mount index Commercial Comments Module Type Module Part Number IPP* 2.4GZ OpenWay Remote 2.4GZ OpenWay Remote OWG-5001-501 IPP* 2.4GZ OpenWay Remote 5' cable OWG-5001-502 SEP* 2.4GZ OpenWay Remote 5' cable OWG-5002-502 IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-503 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-503 SEP* OWG-5002-501 2.5' cable with encoder Also requires thicker gasket for magnet hub to clear index box. 1-hole gasket: FAB-0014001 2-hole gasket: FAB-0014002 4-hole gasket: FAB-0014003 Elster/American/ Romet TC and STD CTR American RPM series rotary meters including TC and non-TC. Commercial Meter must have a factory installed pulser with connector output. Purchase endpoint from Itron and correct cable interface from appropriate meter manufacturer. Romet RM Series ECM2 Commercial IPP* 2.4GZ OpenWay Remote 5' cable OWG-5001-502 SEP* 2.4GZ OpenWay Remote 5' cable OWG-5002-502 IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-503 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-503 Meter must have connector pin with factory-installed pulse output. Purchase endpoint from Itron and correct cable interface from Romet. ECM2 must be configured for 750ms "off-time" between pulses. The ECM2 must have firmware version J or later. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Chapter 1 2.4GZ OpenWay Remote Mount Gas Module Installation Meter Model Description Class Comments Module Type Module Part Number Dresser ROOTS® B3/LMMA Dresser ROOTS® rotary meters equipped with WeigandWire solid state pulsers Commercial IPP* 2.4GZ OpenWay Remote 5' cable OWG-5001-502 SEP* 2.4GZ OpenWay Remote 5' cable OWG-5002-502 IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-503 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-503 Meter must have factoryinstalled pulser with connector output. Purchase endpoint from Itron and correct cable interface from Dresser. Dresser pulser must be version 17 or higher to be compatible. Itron/Actaris Dattus fM2/fM3 Commercial IPP* 2.4GZ OpenWay Remote 5' cable OWG-5001-502 SEP* 2.4GZ OpenWay Remote 5' cable OWG-5002-502 IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-503 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-503 For all meter types, pulse width must be set to .050 seconds. Meter type 11M or smaller must have pulse weight minimum of 10 cubic feet or 1 cubic meter. Meter type 16M or greater must have pulse weight minimum of 100 cubic feet or 1 cubic meter. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 2.4GZ OpenWay Remote Mount Gas Module Meter Compatibility List Meter Model Description Class Comments Module Type Module Part Number Mercury Correctors EC-AT Mini-P Pressure and temperature electronic volume correctors Commercial IPP* 2.4GZ OpenWay Remote 5'cable OWG-5001-502 SEP* 2.4GZ OpenWay Remote 5'cable OWG-5002-502 IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-503 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-503 Mini-AT Mini-Max Correctors must have a Form A board; Form C is NOT supported. Item #056 Pulse Scaling Factor must be set to 2.0. Item #096 Cor Vol Display must be set at 1, 2, 3, or 4 blanks. endpoint does NOT support a setting of 0 blanks. Item #115 Output Pulse Code must be set at 1, 2, 3, or 4. endpoint does NOT support an Output Pulse Code of 0. Mercury Correctors TCI Commercial IPP* 2.4GZ OpenWay Remote 12" lead wires OWG-5001-504 SEP* 2.4GZ OpenWay Remote 12" lead wires OWG-5002-504 *IPP: Itron Private Profile; SEP: Smart Energy Profile TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Chapter 1 2.4GZ OpenWay Remote Mount Gas Module Installation Installation Prerequisites The following tools are required to install, program, and check the 2.4GZ OpenWay Remote Mount Gas Module. Some specific tools may be required dependent on meter or instrument type. • Medium flat-blade screwdriver • Small flat-blade screwdriver • Medium Phillips-drive screwdriver • Hand pliers • Side-cutting pliers - to cut wires and/or cables • 1/4" nut driver or similar blunt tool - to seat endpoint tamper seals • One-inch width putty knife • Adjustable wrench • 3M Scotchlock E-9Y crimping tool, 3M Scotchlock E-9C cartridge tool, or similar crimping tool • All-weather electrical tape • Size T-10 Torx screwdriver • FC200SR loaded with Endpoint-Link or Endpoint-Link Pro software - to program and check endpoint. Note Reference the appropriate programming guide or specification sheet for correct software version. Caution Program the 2.4GZ OpenWay Remote Mount Gas Modules using FC200SR Handheld computer loaded with Endpoint-Link or Endpoint-Link Pro software version 5.3 or later. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount CHAPTER 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module This chapter provides the instructions to mount the 2.4GZ OpenWay Remote Mount Gas Module on a pipe or other flat vertical surface (wall). Installation Options Mount the 2.4GZ OpenWay Remote Mount Gas Module using the Pipe Mount or Wall Mount (Flat Surface) procedure. • Pipe Mount - Pipe mounting is used in conjunction with the Remote Mount Kit (Itron part number CFG-0005-003). The pipe mount option places the endpoint on a pipe near the meter or instrument (not on a wall surface). This option requires a meter manufacturer's cable to connect the endpoint to the meter or instrument. • Flat Vertical (Wall) Mount - Installation using the wall mount option places the endpoint on a wall or other vertical surface. A cable connects the endpoint to the meter or instrument. Mounting Screw Specifications Application Itron Part Number Description To mount adapter plates on pipe brackets 575-9930-016 8-16 x 1/2" length, Type 8 slotted pan-head tapping screw - corrosion-resistant steel To mount endpoints on 575-9930-032 adapter plates 8-16 x 1" Type 8, slotted pan-head tapping screw, corrosion-resistant steel To mount endpoints on SCR-0009-001 sheet metal surfaces (to mount endpoints to wood surfaces, a comparable wood screw is required) 10-16 x 1 1/2" Type AB thread for sheet metal, Phillips pan-head tapping screw, corrosion-resistant steel TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module Mounting Installation Considerations Select a proper mounting location. Itron recommends mounting the 2.4GZ OpenWay Remote Mount Gas Module in close proximity to the meter or instrument. Some applications may require an extended cable-length. The 2.4GZ OpenWay Remote Mount Gas Module supports cable lengths up to 300 feet. Mount the 2.4GZ OpenWay Remote Mount Gas Module upright in a vertical position with the endpoint label easily read and the directional arrow pointed upward. Caution Upright vertical positioning is very important because: • • 2.4GZ OpenWay Remote Mount Gas Modules are designed with the antenna in a vertical direction so the antenna is parallel to the reading device (which has a vertical antenna). Matching antenna polarity can greatly affect RF performance and enable easy module reading. 2.4GZ OpenWay Remote Mount Gas Modules are designed so the tilt tamper is vertical. It is important to maintain vertical positioning in the field to enable tilt tamper stability. Warning Do not mount 2.4GZ OpenWay Remote Mount Gas Modules in an orientation other than vertical (module label arrow pointed upward). Violating the mounting orientation requirements on the equipment documentation (label) will void the product warranty. 10 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Mounting Installation Considerations Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Pipe The following items are required to mount the 2.4GZ OpenWay Remote Mount Gas Module on a pipe or vertical flat surface (wall): Itron Part Number Description OWG-5001-501(IPP) 2.4GZ OpenWay Remote Mount Gas Module with 2.5-foot cable and encoder OWG-5002501(SEP) CFG-0005-003 Remote Mount Installation Kit Kit includes: • (2) two band clamps • (2) two tamper seals • pipe bracket • cable ties • adapter plate • Screws - (2) 1/2" - to attach the adapter plate to pipe bracket • (2) 1" - to attach the endpoint to the adapter plate • (3) 1 1/2" - to attach the endpoint to a vertical surface (wall) Warning Install the 2.4GZ OpenWay Remote Mount Gas Module in an upright position. Any position other than upright can negatively affect radio performance and reduce battery life. To mount the pipe bracket on a vertical pipe 1. Remove the pipe bracket and band clamp from the Remote Mount Installation Kit (Itron part number CFG-0005-003). TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 11 Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module 2. Loosen the band clamp screw until the end of the band releases. 3. Push the end of the clamp's band (1) through the holes (2) in the pipe bracket. The pipe bracket must be oriented as shown below. 4. Place the band clamp around the pipe. The band will loosely wrap around the pipe. Push the end of the band through the band clamp screw assembly. Turn the band clamp's screw assembly to fit into the pipe bracket opening. Tighten the clamp screw until the band clamp is secure on the pipe. Caution The pipe bracket must fit firmly against the pipe to prevent slippage. 12 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Mounting Installation Considerations To mount the adapter plate on the pipe bracket 1. Place the adapter plate on the pipe bracket with the mounting lug at the top. The adapter plate screw bosses fit into the pipe bracket recess. 2. Ensure the adapter plate is positioned as shown below with the mounting lug (1) at the top. To install the adapter plate on a vertical pipe, use the two shortest (1/2") adapter plate mounting screws from the Remote Mount Installation Kit. Place the mounting screws (2) in the holes shown below. 3. Tighten both screws securely in an alternating fashion. Itron recommends 9 to 12inch-pounds of torque. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 13 Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module To mount the 2.4GZ OpenWay Remote Mount Gas Module on the adapter plate 1. Take the 2.4GZ OpenWay Remote Mount Gas Module and the two 1" mounting screws from the Remote Mount Installation kit. Place the back of the remote endpoint against the face of the adapter plate. The adapter plate mounting lug (1) must be positioned just above the endpoint mounting lug recess (2). 2. Push up on the 2.4GZ OpenWay Remote Mount Gas Module until the adapter plate mounting lug (1) is as far as possible inside the endpoint mounting lug recess (2). 14 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Adapter Plate Mounting Positions 3. Install the two 1" endpoint mounting screws from the installation kit. Caution Verify the 2.4GZ OpenWay Remote Mount Gas Module is in an upright, vertical position with the arrow on the label pointing upward. Upright vertical positioning is very important because: • • 2.4GZ OpenWay Remote Mount Gas Module endpoints are designed with the antenna in a vertical direction so the antenna is parallel to the reading device (which has a vertical antenna). Matching antenna polarity can greatly affect RF performance and enable easy endpoint reading. 2.4GZ OpenWay Remote Mount Gas Module endpoints are designed so the tilt tamper is vertical. It is important to maintain vertical positioning in the field to enable tilt tamper stability. 4. Tighten the endpoint mounting screws evenly in an alternating fashion. Itron recommends 9 to 12 inch-pounds of pressure. Adapter Plate Mounting Positions The following pictures show adapter plates mounted on horizontal or 45-degree angle pipes. Caution Regardless of the pipe's direction, the adapter plate mounting lug must always be at the top. If the pipe is a 45 degree angle up to the right, install the adapter plate as shown below. If the pipe is a 45 degree angle up to the left, install the adapter plate as shown below. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 15 Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module If the pipe is horizontal, install the adapter plate as shown below. To install tamper seals and cable ties 1. Place the new tamper seals from the Remote Mount Installation Kit over the 2.4GZ OpenWay Remote Mount Gas Module mounting screws. 16 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Adapter Plate Mounting Positions 2. Firmly push both tamper seals all the way into place with a 1/4-inch nut driver or similar blunt tool. Note A tamper seal is fully seated when the top of the tamper seal is approximately 1/16 inch below the top of the screw recess. 3. Gather any excess endpoint cable. Loop a cable tie around the pipe and excess endpoint cable. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 17 Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module 4. Insert the chiseled end of the cable tie into the locking end and pull the cable tie tight. Cut off and properly dispose the excess cable tie. 2.4GZ OpenWay Remote Mount Gas Module pipe mount installation is complete. Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Wall or Other Flat Vertical Surface To mount the 2.4GZ OpenWay Remote Mount Gas Module on a wall or other flat vertical surface 1. For easier installation, you may drill three pilot holes in the mounting surface (use the proper size drill bit to accommodate the endpoint mounting screws, see the Drilling Template below). Note When drilling pilot holes to mount the 2.4GZ OpenWay Remote Mount Gas Module, the holes for the two bottom screws must be on a horizontal line. If the endpoint will be mounted on a sheet metal surface, use the mounting screws included with the 2.4GZ OpenWay Remote Mount Gas Module mounting kit. Use a comparable wood screw to mount the endpoint on a vertical wood surface. Warning Carefully select a mounting location free from electrical wires. The mounting location must have the proper clearance to accommodate the 1 1/2" endpoint mounting screws so nothing is damaged by the drill or mounting screws. 18 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Wall or Other Flat Vertical Surface 2.4GZ OpenWay Remote Mount Gas Module drilling template 2. Using the three 1 1/2" mounting screws from the Remote Mount Installation Kit, turn the mounting screw for the mounting lug (top of endpoint) part way into the mounting surface. 3. Place the 2.4GZ OpenWay Remote Mount Gas Module mounting lug recess (on the top of the endpoint backplate) just under the screw head. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 19 Chapter 2 Mounting the 2.4GZ OpenWay Remote Mount Gas Module 4. Slide the endpoint upward until the screw head fits completely inside the mounting lug recess. Several adjustments may be necessary to properly position the screw for endpoint mounting. 5. Install the bottom two mounting screws. Fasten screws in an alternating fashion until fully tightened to secure the endpoint firmly in position. To install tamper seals and cable ties 1. Place a new tamper seal (from the Remote Mount Installation Kit) over each endpoint mounting screw. 2. Firmly push both tamper seals into place with a 1/4" nut driver or similar blunt tool. Note A tamper seal is fully seated when the top of the tamper seal is approximately 1/16 inch below the top of the screw recess. 20 TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Mounting the 2.4GZ OpenWay Remote Mount Gas Module on a Wall or Other Flat Vertical Surface 3. To reduce the risk of cable damage, secure the excess endpoint cable with the cable ties from the Remote Mount Installation Kit. Pull the cable tight. Remove and properly dispose the excess cable tie. Caution Upright vertical installation is very important! • • 2.4GZ OpenWay Remote Mount Gas Module endpoints are designed with the antenna in a vertical direction so the antenna is parallel to the reading device (which has a vertical antenna). Matching antenna polarity can greatly affect RF performance and enable easy endpoint reading. 2.4GZ OpenWay Remote Mount Gas Module endpoints are designed so the tilt tamper is vertical. It is important to maintain vertical positioning in the field to enable tilt tamper stability. 2.4GZ OpenWay Remote Mount Gas Module installation on a vertical flat surface or wall is complete. TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 21 Chapter 2 22 Mounting the 2.4GZ OpenWay Remote Mount Gas Module TDC-0838-000 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Author : TDC-0838-000 Create Date : 2009:09:09 06:43:25-05:00 Modify Date : 2009:09:23 09:46:47-07:00 Subject : Natural Gas Solutions Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2009:09:23 09:46:47-07:00 Creator Tool : Acrobat PDFMaker 9.1 for Word Format : application/pdf Title : 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount Description : Natural Gas Solutions Creator : TDC-0838-000 Document ID : uuid:84b8eec8-9782-4852-a5a2-a7d19f12992e Instance ID : uuid:d124a3c6-c0bb-4993-8137-4c4bb5abca77 Producer : Adobe PDF Library 9.0 Page Count : 28EXIF Metadata provided by EXIF.tools