JL MARINE SYSTEMS EA041 MICRO SHALLOW WATER ANCHOR User Manual Instructions
JL MARINE SYSTEMS, INC. MICRO SHALLOW WATER ANCHOR Instructions
Contents
- 1. Instructions
- 2. Bluetooth Module
Instructions
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2140934 |
| Application ID | NFTjBjM5La+/QWCSR4Jnag== |
| Document Description | Instructions |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 101.87kB (1273428 bits) |
| Date Submitted | 2013-12-12 00:00:00 |
| Date Available | 2013-12-12 00:00:00 |
| Creation Date | 2013-10-02 11:58:22 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2013-10-02 11:58:22 |
| Document Title | Instructions |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Paul Gatlin |
Installation Manual Power-Pole Micro™ Shallow Water Anchor 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Congratulations on your purchase of a Power-Pole Micro™ shallow water anchor featuring C-Monster Control System. It has been designed, engineered, and manufactured to provide the best possible performance and dependability for years of enjoyment. Please read all installation instructions carefully. The information contained here describes the proper procedures for safely installing your Power-Pole shallow water anchor. Caution: Do not use the Power-Pole shallow water anchor as your primary anchorage. Never leave your boat unattended while anchored solely with the Power-Pole shallow water anchor. 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Included Items: A. Qty. (4) 5/16” x 3.5 “ all thread transom mount bolts B. Qty. (4) 5/16” fender washers C. Qty. (4) 5/16” tall brass nuts D. Qty. (1) butt connecter E. Qty. (1) ring terminal F. Qty. (3) #8 x ¾” flat head screws G. Qty. (1) adhesive strip H. Qty. (1) Micro™ pull cord (Kayaks) I. Qty. (1) Micro™ cord holder J. Qty. (1) Power cord plug K. Qty. (1) Standard Key-Fob Installation Tools ½” Wrench ½” Socket with ratchet Electric or battery operated drill 5/16” & 1/8” drill bit Heat gun Marine grade sealant Fine point marker Wire cutters Wire strippers Wire terminal crimpers ¼” Allen wrench Phillips screwdriver 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Mounting OptionsImportant: In all options it is recommended that the bottom of the Micro™ driver unit be mounted above the water line of the boat. Deck Mount Installation Transom Mount Installation 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Mounting to Existing or New Adapter Plate Transom Clamp (Not Included ) To order go to www.power-pole.com or an authorized dealer. 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Attaching / Removing the Micro™ Driver Unit Installing Micro™ quick release cord for (Kayaks) 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Programming Dual MICRO™ Driver Units Note: The MICRO™ Driver comes programed as a single unit. For proper performance do not program a single unit as a port or starboard. 1. With both Micro Driver Units identified, begin with the starboard side unit. Locate the “Program” button on top of the unit, and depress and hold it for 6 seconds until the LED is solid red in color then release button. 2. Depress and release the “Up” button for the starboard side Micro Driver Unit. The LED will flash red 1 time indicating that the programming has been completed successfully. Now press and release the program button to save and exit. The LED will flash red 1 time. 3. On the port side, repeat step 1 to enter programming mode. Next, depress and release the “Down” button on the Micro Driver Unit. The LED will flash red twice indicating that the programming has been completed successfully. Now press and release the program button to save and exit. The LED will flash red twice. 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Installing the Dash Switch Mark and drill a pilot hole with 1/8” drill bit to fasten switch using the (2) screws (F) supplied (Do Not Over tighten) or use adhesive strip. Groove Location should be facing downward after mounting. Connecting the MICRO™ Driver Unit to a 12 Volt DC Power Source 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com Connecting the MICRO™ Driver Unit to a 12 Volt DC Power Source (continued ) For technical support call 813-689-9932 opt. 2 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com FCC Part 15.19 Warning StatementTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.21 Warning StatementNOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. FCC Part 15.105(b) Warning StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. IC RSS-GEN, Sec 7.1.3 Warning StatementENGLISH: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. FRENCH: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC RSS-GEN, Sec 7.1.2 Warning StatementENGLISH: Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. FRENCH: Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée quivalente (p.i.r.e.) ne dépassepas l'intensité nécessaire à l'établissement d'une communication satisfaisante. 9010 Palm River Road. Tampa, FL 33619 phone 813.689.9932 fax 813.689.8883 power-pole.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 10 Language : en-US Tagged PDF : Yes Author : Paul Gatlin Creator : Microsoft® Word 2010 Create Date : 2013:10:02 11:58:22-04:00 Modify Date : 2013:10:02 11:58:22-04:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools