Japan Radio NKE2632 Solid State S-Band Marine Radar User Manual Instruction Manual Funtion Part 4

Download:
Mirror Download [FCC.gov]
Document ID	2791063
Application ID	o6LERARSP56i/cSy+lEJSg==
Document Description	Instruction Manual Funtion Part 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.59kB (1469877 bits)
Date Submitted	2015-10-22 00:00:00
Date Available	2015-10-22 00:00:00
Creation Date	2015-10-15 15:28:30
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-10-15 15:28:38
Document Title	Instruction Manual Funtion Part 4
Document Creator	Word 用 Acrobat PDFMaker 11
Document Author:	PCUser

Add as many WPTs as required in the same way.
Memo
When Use Assistant circle is not used for creation of the next WPT, clear the item by
clicking on [Use Assistant circle].
After creating the last WPT, double click the left button or click the right button.
The Route planning is terminated.
9.7.3 Editing a route by graphic editing
Click on the [Open] button on the Route Planning bar.
Or select the [File operation...] button that is displayed by clicking on the Route Planning menu
button.
The "File operation..." dialog box appears.
Select the route file to be edited and click on the [Open] button.
Memo
If [Read only] is selected, the file overwrite function is disabled. To overwrite the existing
file, clear the item before opening the file.
Section 9
Route Planning
9-40
3
Edit the route with graphic editing.
Refer to the following for the editing methods.
Editing operations that are allowed by clicking on WPT or a leg of the route.
Editing function
Related section
Inserting WPT between WPTs
9.7.3.1 Inserting a WPT between WPTs
Moving WPT
9.7.3.2 Moving a WPT
Changing XTL (cross track limit)
9.7.3.3 Changing XTL (cross track limit)
Operations that are allowed on the context menu that is displayed by clicking the right
mouse button on WPT or a leg of the route
WPT0 or the last WPT is selected
WPT other than WPT0 and the last WPT is selected
A leg is selected
XTL is selected
9-41
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Menu
Add WPT
Function
Related section
Adds WPT.
9.7.3.4 Adding WPT on the context
menu
Move WPT
Moves WPT.
9.7.3.5 Moving WPT on the context
menu
Delete WPT
Deletes WPT.
9.7.3.6 Deleting WPT on the context
menu
Copy this route
Copies the entire route.
9.7.3.7 Copying and merging a route
Paste this route
Pastes the copied route on to
on the context menu
another route file.
Rotate this route
Rotates the route.
9.7.3.8 Rotating a route on the
context menu
Move this route
Moves the route.
9.7.3.9 Moving a route on the context
menu
Insert other
Inserts another dialog into the route
9.7.3.10 Merging other route on the
route
that is being edited.
context menu
Insert WPT
Inserts WPT between WPTs.
9.7.3.11 Inserting WPT between
WPTs on the context menu
Divide leg...
Change XTL
Displays a leg division dialog.
9.7.3.12 Dividing a leg on the context
Divides the leg in the dialog.
menu
Changes the XTL (cross track limit).
9.7.3.13 Changing XTL (cross track
limit) on the context menu
After completing editing, save the route file.
For the details of how to save the file, refer to "9.5 Saving a Route".
9.7.3.1
Inserting a WPT between WPTs
Click the left button on the leg between the WPTs in which a WPT is to be inserted.
The leg is set to a selected state.
Click
Section 9
Route Planning
9-42
2
Determine the WPT insertion position by moving the cursor.
A rubber band is displayed.
Click the mouse button.
A WPT is added.
WPT that was added
Cancelling the addition operation
The addition operation can be cancelled by clicking the right button instead of clicking at Step 3.
9.7.3.2
Moving a WPT
Click on the WPT to be moved.
The WPT is set to a selected state.
Click.
9-43
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
2
Move the WPT to any position.
A rubber band covering from the WPTs at the front and back to the cursor is displayed.
*In the case of WPT0 or the last WPT, a rubber band is displayed from one side.
Click the mouse button.
The move is determined.
Cancelling the move operation
The move operation can be cancelled by clicking the right button instead of clicking at Step 3.
Section 9
Route Planning
9-44
9.7.3.3
Changing XTL (cross track limit)
Click on the XTL.
The cursor is changed to the XTL change mode.
Move the cursor and change the XTL.
Use the information (XTL distance) that is displayed near the cursor and the line that is linked to
the cursor as the guideline.
Note
The line cannot be moved exceeding the limit of XTL (9.99 NM).
Click the mouse button.
The width of the XTL is changed.
Cancelling the change operation
The change operation can be cancelled by clicking the right button instead of clicking at Step 3.
9-45
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.7.3.4
Adding WPT on the context menu
Add a WPT to WPT0 or the last WPT.
Click the right mouse button on WPT0 or the last WPT.
The context menu is displayed.
Click [Add WPT] on the context menu.
The cursor changes to the WPT addition mode.
Move the cursor on the position of the WPT to be added.
Click the mouse button.
WPT that was added
WPT is added.
Note
In the case of ARCS, when WPT is specified at a position other than the active chart and
another panel exists at the positon, the panel display changes automatically.
Section 9
Route Planning
9-46
Cancelling the addition operation
The addition operation can be cancelled by clicking the right button instead of clicking at Step 4.
9.7.3.5
Moving WPT on the context menu
Click the right button on the WPT to be moved.
The context menu is displayed.
Click Love WPT] on the context menu.
The cursor mode changes to the WPT move mode.
Move the cursor to the required position.
Click the mouse button.
WPT that was added
Cancelling the addition operation
The addition operation can be cancelled by clicking the right button instead of clicking at Step 4.
9-47
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.7.3.6
Deleting WPT on the context menu
Click the right button on the WPT to be deleted.
The context menu is displayed.
Click [Delete WPT] on the context menu.
The WPT is deleted.
Section 9
Route Planning
9-48
9.7.3.7
Copying and pasting a route on the context menu
A route can be copied and pasted on to another route file.
Click the right button on a WPT of the route to be copied.
The context menu is displayed.
Select [Copy this route] on the context menu.
Selected
route
Route file that
is currently
being selected
The route is copied.
Open the route file of the merge destination by switching the tab.
Select the route to be merged and click the right button.
Route file at the
merge destination
Click on [Paste this route] (merging routes) in the context menu.
The copied route is merged with the selected route.
Merged route
9-49
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Note
At pasting, Course, Distance, Total Distance, ROT, TTG, and ETA are recalculated. When a Route
planning error occurs as a result, an error message is displayed and insertion and linkage are not
performed. For the error messages that are displayed, refer to "9.12 Error Messages that are
Displayed when a Route is Created".
9.7.3.8
Rotating a route on the context menu
Click the right mouse button on the WPT No. that is used as the reference of rotation.
The context menu is displayed.
Click [Rotate this route] on the context menu.
Rotate the route.
The route rotates
based on the
selected WPT
Section 9
Route Planning
9-50
4
Click the mouse button.
Cancelling the addition operation
The addition operation can be cancelled by clicking the right button instead of clicking at Step 4.
9.7.3.9
Moving a route on the context menu
Click the right mouse button on the WPT of any of the routes to be moved.
The context menu is displayed.
Click [Move this route] on the context menu.
9-51
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
3
Move the route.
After positioning the route, click the mouse button.
Cancelling the addition operation
The addition operation can be cancelled by clicking the right button instead of clicking at Step 4.
Section 9
Route Planning
9-52
9.7.3.10 Merging other route on the context menu
Merge the route of another file with the last WPT of the route.
Click the right mouse button on WPT No.
The context menu is displayed.
Click on [Insert other route] in the context menu.
The "Insert other route" dialog is displayed.
Click on the route file to be merged from the [Select Route] combo box.
Click on the [OK] button.
The route file is merged.
Merged route
Note
When the range exceeded the insertion allowed range, an error message is displayed and the
route will not be inserted.
9-53
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.7.3.11 Inserting WPT between WPTs on the context menu
Click the right mouse button on the leg between the WPTs within which WPT is to be
inserted.
The context menu is displayed.
Click [Insert WPT] on the context menu.
The cursor mode changes to the WPT insertion mode.
Move the cursor to the position in which WPT is to be inserted.
Click the mouse button.
WPT is inserted.
Cancelling the insertion operation
The insertion operation can be cancelled by clicking the right button instead of clicking at Step 4.
Section 9
Route Planning
9-54
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.7.3.12 Dividing a leg on the context menu
Click the right mouse button on the leg of the route to be divided.
The context menu is displayed.
Click [Divide leg...] on the context menu.
The "Divide Route" dialog box appears.
Input a division interval.
[Every(LON)] (longitude division)
1) Click on "Every(LON)".
2) Enter a longitude division interval.
[Every(NM)] (nautical mile division)
1) Click on "Every(NM)".
2) Enter a nautical mile division interval.
Click on the [OK] button.
The leg that was selected in Step 1 is divided in the unit specified in Step 3.
9-55
Section 9
Route Planning
Note
When the total number of WPTs exceeds the maximum value of 511 as a result of leg division, leg
division is executed within the range that does not exceed 511 in the entire course.
9.7.3.13 Changing XTL (cross track limit) on the context menu
Click the right mouse button on XTL.
The context menu is displayed.
Click [Change XTL] on the context menu.
Change the width of XTL by moving the cursor.
Section 9
Route Planning
9-56
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Click the mouse button.
The XTL width is changed.
Cancelling the operation
The operation can be cancelled by clicking the right button instead of clicking at Step 4.
9-57
Section 9
Route Planning
9.8 Creating an Alternate Route
An alternate route can be created during sailing by referencing the route that is displayed on the
screen. The alternate route can be saved by overwriting during monitoring or by assigning a new
name.
The following two charts indicate the original route and the changed alternate route. As shown below,
an alternate route is created while the original route is displayed during creation of an alternate route.
In the example below, the following WPTs are changed.
• W001 Position (shift)
• W002 (Insertion. As a result, the following WPT number is incremented by 1.)
• W006 (One WPT is added to the last WPT.)
Memo
The alternate route is displayed in light blue to distinguish the changed section from the original
route.
Original route
Section 9
Route Planning
9-58
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Original route and alternate route
Alternate route
W001: Shift
W006: Add to the last WPT
W002: Insertion
9-59
Section 9
Route Planning
9.8.1 Creating an alternate route
Click the right mouse button on the WPT or leg of the route that is being monitored.
The context menu is displayed.
Click on [Monitoring WPT xxx] or [Monitoring LEG xxx] of the context menu.
The context menu is displayed.
Click on [Edit this route] of the context menu.
The “Route Planning” dialog is displayed.
Section 9
Route Planning
9-60
4
For table editing, edit the route by using the same procedure as that from Step 3 of
“9.6.4 Editing a route by table editing”.
For graphic editing, click the right mouse button on the WPT or leg of the route that is
being monitored.
The context menu is displayed.
Click on [Planning WPT] or [Planning LEG] of the context menu.
The context menu for editing WPT or leg is displayed.
Edit the route by using the same procedure as from Step 3 of “9.7.3 Editing a route by
using graphic editing”.
9.8.2 Saving an alternate route
9.8.2.1
Overwriting without changing the file name
Click on the [Save] button.
A confirmation dialog is displayed.
Click on the [YES] button.
The alternate route is displayed and used instead of the original route.
9-61
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Note
In this case, the route name that is currently monitored remains unchanged. The original route file
no longer exists since it is overwritten.
9.8.2.2
Saving the file by naming
Click on the [Save as] button on the route plan menu of the route plan bar.
The “Save as Route File” dialog is displayed.
Enter a new file name and click on the [Save] button.
The alternate route is displayed and used instead of the original route.
Note
In this case, the route name that is being monitored is changed to the file name that was entered.
The original route file remains.
Section 9
Route Planning
9-62
9.9 Checking Route Data
Route data is constantly checked based on the safety standards and limits.
These items are checked on the "Check Route" dialog box.
The "Check Route" dialog box appears by clicking on the [Show Route Check] button on the Route
Planning bar.
9.9.1 Checking a route based on the safety
standards
The result of safety check is displayed on the "Safety check" tab.
Cause
Count badge
Re-check button
Check box
Approval status (Result)
WPT
[Disregard] button
[Jump] button
[Reset] button
[Safety contour] box
When safety errors are detected, the number of errors is displayed on the count badge. When the error
count exceeds 999, "More" is displayed instead of the count.
The list of Cause and Result of the errors that were detected is displayed for each WPT prior to and
following the error occurrence point. The following causes are displayed.
Cause
Traffic separation zone.
Traffic crossing.
Traffic roundabout.
Traffic precautionary.
Two way traffic.
Deeper water route.
9-63
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Cause
Recommended traffic lane.
Inshore traffic zone.
Fairway.
Restricted area.
Caution area.
Offshore production area.
Military practice area.
Seaplane landing area.
Submarine transit area.
Ice area.
Channel.
Fishing ground.
Fishing prohibited.
Pipeline area.
Cable area.
Anchorage area.
Anchorage prohibited.
Dumping ground.
Dredge area.
Cargo transshipment area.
Incineration area.
Specially protected area.
Safety contour
Coast line
Obstruction
Under water rock
Wreck
Spoil ground.
Sensitive sea area.
Archipelagic sea lane.
Marine farm/aquaculture.
Approaching buoy/light.
Dangerous symbol.
Dangerous line.
Dangerous area.
Depth area
Sounding
PSSA (Particularly Sensitive Sea Area)
Areas to be avoided
Section 9
Route Planning
9-64
Updating an error list
By clicking on the Re-check button, the latest error information is displayed by rechecking the
information.
Sorting error display
By clicking on any of the items on the title line, error display can be sorted based on the item. A sort
mark (
or
) is displayed on the title of the selected item.
Whenever an item is clicked on, the error display is sorted based on the ascending (
descending (
) or the
) order.
Selecting an error to be processed
Select the check box of the error to be processed. To select all the errors, select the check box on the
title line.
When the [Jump] button is clicked on, control jumps to the occurrence point of the error that was
selected on the error list.
Ignoring an error
Click on the [Disregard] button. To restore the error that was once ignored, click on the [Reset] button.
Checking an error target on the list
When an error is detected, the WPT under which the error occurred is highlighted in red.
9-65
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Checking an error target on the route
When an error is detected, the error target WPT and the leg are highlighted as follows.
When error display is clicked on the error list, the symbol, line, and area of the error target are
highlighted.
Symbol
Line
Area
9.9.2 Checking a route based on the limits
The result of limit check is displayed on the "Limit check" tab.
Count badge
WPT
Re-check
Cause
Limit parameters
When limit errors are detected, the error count is displayed on the count badge. When the error count
exceeds 999, "More" is displayed instead of the count.
The cause of the error that was detected is displayed for each of WPTs prior to and following the error
occurrence point.
The following causes are displayed.
Section 9
Route Planning
9-66
Cause
The planned radius is beyond the MAX turn radius.
The planned radius is under the MIN turn radius.
The course angle of leg is beyond the MAX course angle.
The planned speed is beyond the MAX planned speed.
The planned speed is under the MIN planned speed.
The planned ROT is beyond the MAX ROT.
The planned ROT is under the MIN ROT.
The Leg length is shorter the MIN Leg length.
The straight route cannot be created.
Updating error display
By clicking on the re-check button, the latest error information is displayed by rechecking the
information.
Sorting error display
By clicking on any of the items on the title line, error display can be sorted based on the item. A sort
mark (
or
) is displayed on the title of the selected item.
Whenever an item is clicked on, the error display is sorted based on the ascending (
descending (
) or the
) order.
Checking an error target on the route
When an error is detected, the WPT of the error target and the leg are highlighted as follows.
9-67
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.10 Navigation Calculation Function
This section describes the function that supports the distance and bearing calculation that are required
for navigation.
9.10.1 ROT (Rate of Turn)
ROT is automatically calculated from the planned ship’s speed and the turn radius and displayed on
[ROT].
9.10.2 ETA (Estimated Time of Arrival)
ETA is automatically calculated from the WPT position, planned ship’s speed, and time zone and is
displayed on [ETA].
9.10.3 TTG (Time to Go)
TTG is automatically calculated from the WPT position and planned ship’s speed and displayed on
[TTG].
A display format can be selected from the list that is displayed by clicking on the TTG title.
[Days hh:mm]
01Days 23:59
[hhhh:mm]
9999:59
Section 9
Route Planning
9-68
9.11 Importing/Exporting a Route File
By using the "Import" or "Export" dialog box, the route file that was created can be imported/exported.
The dialog box can be displayed as follows.
Click on the Route Planning menu button.
Select [Import] or [Export] from the list that is displayed.
The "Import" or "Export" dialog box appears.
9.11.1 Importing a route file
Specify the "Drive", the "Folder", the "File name", and the "File Type" that stores the
file to be imported.
Click on the [OK] button.
The route file that is selected can be imported.
Press the [X] button to cancel the importing of a file.
Note
The file type of the file to be imported can be selected in the [File Type] combo box.The file types
that can be imported are as follows.
.rtn:
Displays a route file (normal).
This file is used for ECDIS (JAN-701B/901B) and Chart Radar (JMA-900B)
.rta:
Displays a route file (TCS route).
This file is used for ECDIS (JAN-701B/901B) and Chart Radar (JMA-900B)
.rtm:
Displays a route file used in this equipment.
.csv:
Displayes a route file in CSV format.
*(Wildcard): Displays all the files that can be imported.
9-69
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.11.2 Exporting a route file
Specify the "Drive", the "Folder", the "File name", and the "File Type" that stores the
file to be exported.
Click on the [OK] button.
The route file that is currently opened is exported.
Press the [X] button to cancel the exporting of a file.
Section 9
Route Planning
9-70
9.12 Error Messages that are Displayed
when a Route is Created
When a route is created, the following error messages may be displayed, disabling execution of the
specified operation.
Error message
Status
The total number of WPTs exceeded the upper limit
(511).
The leg length exceeded the maximum value (longitude
150°).
The latitude exceeded the latitude upper limit.
9-71
Section 9
Route Planning
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Section 9
Route Planning
9-72
Section 10 Route Monitoring
10.1 Route Monitoring
The route monitoring function enables monitoring of the position of own ship, heading, and ship speed,
and calculation of an expected time of arrival using the route created in route planning.
Memo
For moitoring a route, it is necessary to create a route file or copy a route file in route planning in
advance.
For the details of route planning, refer to "Section 9 Route Planning".
10.1.1 Starting route monitoring
Click on the [Menu] button on the left toolbar.
The menu is displayed.
Click on the [Route Monitoring] button on the menu.
The "Route Monitoring" dialog box appears.
"File operation" dialog box display button
Select a required route file.
[Selecting from the [Route] combo box]
1) Click on the [Route] combo box.
2) Select a required route.
[Selecting from a route file list]
1) Click on the "File operation" dialog box display button.
2) Select a required file from the list of the "File operation" dialog box.
About the "File operation" dialog box, refer to "10.2 Selecting and Deleting Route Files"
3) Click on the [Open] button.
10-1
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
4
Select a WPT to which the ship is to travel. A WPT can be selected automatically or
manually.
[Automatic selection]
The nearest WPT from the own ship’s position is selected automatically.
1) Open the next WPT list by clicking on the [To WPT] combo box.
2) Select [AUTO Select].
[Manual selection]
Select a WPT manually.
1) Open the next WPT list by clicking on the [To WPT] combo box.
2) Click on a required WPT.
Memo
When route sharing with GPS is enabled, [Active Route] is displayed on [Route] combo box. To
start route monitoring by using the route that has been created by GPS, select [Active Route].
10.1.2 Ending route monitoring
Click on the [Menu] button on the left toolbar.
The menu is displayed.
Click on the [Route Monitoring] button on the menu.
The "Route Monitoring" dialog box appears.
Click on the [Route] combo box.
Click on [UNLOAD].
Section 10
Route Monitoring
10-2
10.2 Selecting and Deleting Route Files
Selection of the route to be displayed and deletion of obsolete route files are enabled on the "File
operation" dialog box.
Use the following procedure to open the "File Operation" dialog box.
Click on the [Menu] button on the left toolbar.
The menu is displayed.
Click on the [Route Monitoring] button on the menu.
The "Route Monitoring" dialog box appears.
Click on the [File operation] dialog box display button.
The "File Operation" dialog box appears.
Selection
check
File name
Comment
File creation date
10.2.1 Selecting a route to be displayed
Select the selection check box of the route file to be displayed.
When [Name] is clicked on,
is displayed. Whenever
is clicked on, the file display
sequence changes to the ascending/descending sequence based on the names.
Click on the [Open] button.
10-3
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10.2.2 Deleting a route file
Click the selection check of the route file to be deleted.
Click on the [Delete] button.
A message dialog box is displayed as to whether the deletion is to be executed.
When executing deletion, click on the [Yes] button. To cancel deletion, click on the
[No] button.
Note
The file of the route that is currently monitored or the route that is used for automatic sailing
cannot be deleted.
The following message dialog box appears.
Close the dialog box by clicking on the [OK] button.
Section 10
Route Monitoring
10-4
10.3 Voyage Information (Voyage
Monitoring Information) Dialog Box
The "Voyage Information" (voyage monitoring information) dialog box is used to monitor voyage
statuses.
In addition to voyage monitoring, execution of course change and termination of automatic navigation
can also be performed.
Use the following procedure to open the "Voyage Information" dialog box.
Click on the [Menu] button on the left toolbar.
The menu is displayed.
Click on the [Route Monitoring] button on the menu.
The "Route Monitoring" dialog box appears.
Click on the [Voyage Information] button.
The "Voyage Information" dialog box appears.
[1]
[2]
[3]
[4]
[5]
[6]
[1] Route name display
A file name of the route that is being monitored is displayed.
10-5
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
[2] To WPT information
The To WPT information that was selected in the “Route Monitoring” dialog box is displayed.
[a]
[b]
[c]
[d]
[e]
[f]
[g]
[h]
[a] [To WPT] (To WPT number)
Displays a To WPT number.
[b] [Distance] (Own ship - To WPT distance)
Displays a distance between the position of the own ship and the position indicated by To
WPT.
[c] [Bearing] (Own ship - To WPT angle)
Displays an angle of the own ship and the position indicated by To WPT.
[d] [TTG] (Expected traveling time)
Displays an expected traveling time to reach the position indicated by To WPT.
[e] [ETA] (Expected time of arrival)
Displays the expected time of arrival at the position indicated by To WPT.
[f] Cross track direction
Displays a cross track direction of the own ship.
When the own ship is cross-tracked on the right side, [STBD] is displayed and when the own
ship is cross-tracked on the left side, [PORT] is displayed.
[g] Cross track distance
Displays a cross track distance of the own ship.
[h] Cross track distance unit switching button
Switches the display unit of a cross track distance. Whenever the button is clicked on, the
unit is switched to "m" or "NM".
Section 10
Route Monitoring
10-6
[3] Next WPT information
[a]
[b]
[a] [Next WPT] (Next WPT number)
Displays a Next WPT number.
[b] [New Course] (Leg bearing of Next WPT)
Displays a leg bearing of the Next WPT.
[4] [Final ETA/Total Distance] (Expected time of arrival at final WPT/total distance)
This section displays the expected time of arrival at the final WPT based on the calculation
from the current speed and the distance from WPT0 (departure point) to the position of the
own ship.
The expected time of arrival at the final WPT and the total distance can be displayed or hidden
by clicking on the Open/Close button.
Open/Close
button
[a]
[b]
[a] [Final ETA]
Displays ETA up to the last WPT that was calculated based on the current ship’s speed.
[b] [Total Distance (from WPT0)] (Total distance)
Displays a total distance from WPT0 to the own ship.
10-7
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
[5] Automatic sailing information
This section displays the status of Auto Pilot that is installed.
Note
If the Auto Pilot device is not installed, information is not displayed.
[a]
[b]
[c]
[d]
[a] Automatic sailing status
Displays an automatic sailing status.
Display
Status
No display
A/P (Auto Pilot) non-connection setting or automatic sailing alert is
occurring
Track Control
The A/P steering mode is set to Track Control.
Heading Control
The A/P steering mode is set to Heading Control.
Manual
The A/P steering mode is set to Manual.
[b] Control mode
Displays a control mode of automatic sailing.
Display
Status
No display
Automatic sailing inactive
KEEP
Automatic sailing/maintaining the course
TURN
Automatic sailing/turning (TCS category C)
Assisted Turn
Automatic sailing/turning (TCS category B)
[c] Turning mode
Displays a turning mode of automatic sailing.
Display
Status
No display
Automatic sailing inactive
AUTO
Automatic turning mode
[d] Set heading
Displays the set heading to be transmitted to Auto Pilot.
Section 10
Route Monitoring
10-8
[6] [Auto Sail Stop] button
Click on this button to terminate automatic sailing.
The following message dialog box appears.
When the [OK] button is clicked on, automatic sailing terminates.
Memo
When a message dialog box indicating the switching of the Auto Pilot mode to the Manual
mode is displayed, switch the Auto Pilot steering mode to the Manual mode.
10-9
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10.4 Voyage Calculation Dialog Box
The "Voyage calculation" dialog box is used to calculate the expected WPT arrival time, the time
required, and required ship speed
It is also possible to calculate a distance between two points such as between WPTs, from the own
ship’s position to WPT, or any position on the route to WPT.
Use the following procedure to open the "Voyage calculation" dialog box.
Click on the [Menu] button on the left toolbar.
The menu is displayed.
Click on the [Route Monitoring] button on the menu.
The "Route Monitoring" dialog box appears.
Click on the [Voyage calculation] button.
The "Voyage calculation" dialog box appears.
Section 10
Route Monitoring
10-10
When the [Schedule] (schedule calculation) button is clicked on, a schedule calculation dialog is
displayed.
When the [Distance] (distance calculation) button is clicked on, a distance calculation dialog is
displayed.
[1]
[2]
[1]
[3]
[4]
[2]
[5]
[3]
"Schedule" Dialog
"Distance" Dialog
"Schedule" Dialog
[1] [Destined WPT] combo box
Select a destined WPT.
[2] [Distance] (Distance up to the destined WPT)
Displays a distance from the own ship’s position to the selected WPT.
[3] [TTG] (Expected traveling time)
Displays a traveling time required based on the position from the current SOG value to the destined
WPT.
[4] [ETA] (Expeced time of arrival)
Displays a time at arrival of the destined WPT from the current SOG value.
[5] [Calculation] (Calculation)
Selects a calculation method and enters the values.
10-11
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
"Distance" Dialog
[1] [From]
Selects a starting point calculation method and enters the values.
[2] [To]
Selects an ending point calculation method and enters the values.
[3] [Distance (Result)] (Distance calculation result)
Displays distance from the starting point and ending point that were obtained from the setting.
10.4.1 Calculating a schedule
Click on the [Schedule] button.
Click on the [Destined WPT] combo box.
Click on the WPT number whose schedule is to be calculated.
The measured distance from the own ship to the selected WPT, the estimated required time
calculated based on the SOG (Speed Over the Ground), and the estimated time of arrival are
displayed.
Section 10
Route Monitoring
10-12
4
Select a calculation method and enter a value.
When [Average Speed] (calculated ship’s speed), [TTG] (calculated traveling time), or [ETA]
(calculated time of arrival) is selected and a value is entered, the calculation result of the ship’s
speed, expected traveling time, and expected time of arrival are displayed. These three items
are displayed by linking.
[Average Speed]: Enter a ship’s speed.
[TTG]:
Enter a calculated traveling time.
[ETA]:
Enter a calculated time of arrival by using a calendar/time picker.
10.4.2 Calculating a distance
Click on the [Distance] button.
10-13
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
2
Select starting point calculation method and enter a value.
Set a starting point for distance calculation by selecting [WPT] (selection of starting WPT), [Pick
on the route] (selecting any position on the starting route), or [Ship’s position] (selection of the
own ship’s position).
[WPT]:
Click on a WPT used as the starting point from the combo box.
[Pick on the route]: Any position on the routes set in the starting WPT and the end WPT is
used as the starting point.
When the [Edit] (editing any position) button is clicked, the color of the
selectable route changes to green. When any position is clicked, that
position becomes the starting point.
[Ship’s position]:
The own ship’s position is used as the starting point.
Click on the WPT to be passed through from the [Via WPT] combo box.
Select an ending point calculation method and enter a value.
Set an ending point for distance calculation by selecting [WPT] (selection of ending WPT) or
[Pick on the route] (selecting any position on the ending route).
[WPT]:
Click on a WPT used as the ending point from the combo box.
[Pick on the route]: Any position on the routes set in the starting WPT and the end WPT is
used as the end point.
When the [Edit] (editing any position) button is clicked, the color of the
selectable route changes to green. When any position is clicked, that
position becomes the end point.
Memo
When the [Edit] button is clicked on, the following message dialog box appears.
Position selection can be cancelled by clicking on the [Cancel] button.
Section 10
Route Monitoring
10-14
10.4.3 Example of distance calculation
Calculating with [WPT]
Selected
segment
Route distance between selected WPTs
Selecting [Pick on the route] (Selecting any starting point on the route) as the starting point:
Set any position on the route as
the starting point
Selected
segment
Route distance between selected WPTs
10-15
Section 10
Route Monitoring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Selecting [Ship’s position] (Selecting the own ship’s starting position):
Own ship's
position
WPT
Selected
segment
Route distance between selected WPTs
Section 10
Route Monitoring
10-16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : PCUser
Create Date                     : 2015:10:15 15:28:30-07:00
Modify Date                     : 2015:10:15 15:28:38-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:10:15 15:28:38-07:00
Creator Tool                    : Word 用 Acrobat PDFMaker 11
Format                          : application/pdf
Creator                         : PCUser
Document ID                     : uuid:09a00efd-89d3-4e28-b744-60153becf61f
Instance ID                     : uuid:e45d4826-f637-4351-8b7e-51d075eaf32e
Producer                        : Adobe PDF Library 11.0
Page Count                      : 49

EXIF Metadata provided by EXIF.tools