KAPSCH TRAFFICCOM CANADA 802477 TRP-8100 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2295481
Application ID	2vwavOVMbVxq+TxDsJ+B/A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.88kB (1898541 bits)
Date Submitted	2014-06-16 00:00:00
Date Available	2014-06-16 00:00:00
Creation Date	2014-03-21 08:40:03
Producing Software	itext-paulo (lowagie.com)[JDK1.1] - build 132
Document Lastmod	2014-05-29 14:45:45
Document Title	User Manual
Document Creator	pdftk 1.12 - www.pdftk.com

Kapsch TrafficCom IVHS
TRP-8100 Interior Transponder Mounting
Instructions for passenger vehicles
The TRP-8100 transponder mounts in passenger vehicles on the windshield. LEDs on the side of
the transponder provide transaction feedback. Mount the transponder with the LEDs visible to the
driver.
Requirements


For reliable operation of the transponder, the vehicle must be
equipped with only one transponder while passing through a toll
Select a mounting location, ensuring the LEDs are visible to the driver.
facility. Other transponders present in or on the vehicle must be
The preferred mounting location is centered and to the left behind
switched off or enclosed in an RF shield.
the rear view mirror, leaving approximately 1 in. of the left side of the
The mounting location must provide direct line-of-sight
transponder visible.
communication between the transponder and the toll facility
overhead antenna.

TRP-8100 Transponder Mounting Instructions
Apply Dual Lock™ fasteners in accordance with 3M™ document
70-0709-4029-4.
transponder
centerline of mirror and transponder
LEDs
rear view mirror
approx. 1 in.
Preferred Mounting Location
If the transponder cannot be mounted in the preferred mounting
location, mount the transponder anywhere within the alternate
mounting area shown below:
2 in.
top of windshield
rear view mirror
6 in.
centerline of mirror
6 in.
6 in.
Alternate Mounting Location
1. Clean the mounting location in accordance with 3M document
©Kapsch TrafficCom IVHS. All rights reserved. Subject to alteration without notice.
70-0709-4029-4.
2. Remove the protective backing from the two Dual Lock fasteners
and press the transponder onto the mounting location, ensuring the
status LEDs on the left side of the transponder are facing the driver.
Maintain the pressure for approximately 15 seconds to ensure a
good bond.
Dual Lock fasteners
TRP-8100 Transponder - Rear View
3. Remove the transponder by lifting any corner with sufficient force to
separate the Dual Lock strips. Do not reuse the Dual Lock strips if
removing them from the windshield. Obtain new strips as required.
Kapsch Group
future-oriented market
segments of Intelligent Transportation Systems (ITS) and Information and Communication Technology (ICT). Kapsch. Always one ste
Kapsch TrafficCom IVHS
| 6020 Ambler Drive | Mississauga, Ontario L4W 2P1 | CANADA | Phone +1 905 624 3020 | Fax +1 905 625 6197
54 S. Commerce Way, Suite 100 | Bethlehem, PA 18017 | Phone +1 610 419 1479 | Fax +1 610 419 1489
E-Mail ktc.ca.info@kapsch.net | ktc.us.info@kapsch.net | www.kapsch.net
p ahead.
801850-023 rev A1.
The Kapsch Group and its entities Kapsch TrafficCom, Kapsch CarrierCom and Kapsch BusinessCom are specialised in the

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2014:03:21 08:40:03-05:00
Creator                         : pdftk 1.12 - www.pdftk.com
Modify Date                     : 2014:05:29 14:45:45-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : pdftk 1.12 - www.pdftk.com
Metadata Date                   : 2014:05:29 14:45:45-05:00
Producer                        : itext-paulo (lowagie.com)[JDK1.1] - build 132
Format                          : application/pdf
Document ID                     : uuid:65411b78-471e-4566-be24-54a664dae036
Instance ID                     : uuid:99107c8b-2597-4c7d-a0c9-5ae3ea999d46
Page Count                      : 2
For                             : MacCormack Robert,
Title                           : new 407 install front.pdf
Bounding Box                    : 32 28 580 761
Container Version               : 11
Creator Version                 : 15
Image Height                    : 733
Image Width                     : 548
Image Size                      : 548x733
Megapixels                      : 0.402

EXIF Metadata provided by EXIF.tools