KMW 849144415 800 MHz iDEN RRH User Manual Test Procedure

Download:
Mirror Download [FCC.gov]
Document ID	1912972
Application ID	/VMymTREF+9ex0Vk/2vZhQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.9kB (1086196 bits)
Date Submitted	2013-03-07 00:00:00
Date Available	2013-03-07 00:00:00
Creation Date	2013-02-21 18:51:48
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2013-02-21 18:51:48
Document Title	Test Procedure
Document Creator	Microsoft® Office Word 2007
Document Author:	KH Shin, Andy Ku

iDEN 800MHz RRH User Guide
iDEN 800MHz RRH
User Guide
Written by
Reviewed by
Approved by
JINHEE LEE
KSHIN
MICHALE YOON
iDEN 800MHz RRH User Guide
Index
Contents
1. FCC Information ………………………………….….……..3
2. Test Environment ………………………………..………..3
2.1. Preperation List …………………………………..……..3
2.2. Testing Environement Configuration …………..……..3
2.3. RRH Setup Procedure …………………………..……….4
3. Network Configuration ………………………...………….5
4. Operate GUI Program
……………………………………6
iDEN 800MHz RRH User Guide
1.
FCC Information
RF Exposure compliance must be addressed at the time of licensing
2.
Test Environment
2.1. Preperation List

iDEN 800Mhz RRH (Remote Radio Head 800MHz)

PSU (Power Supply Unit)

BBU (Base Band Unit, Alacaltel Lucent)

Optic transceiver 2EA (Yellow- 1550nm, Blue- 1310nm)

Optic Cable

RJ45 Ehternet Cable

Laptop computer for RRH GUI
2.2. Testing Environement Configuration
iDEN 800MHz RRH User Guide

PSU Setting Table
Voltage
Low : -38V
Normal : -48V
High : -57V
Current Limit
12 A
9.5 A
8A
2.3. RRH Setup Procedure

Checke PSU Power 48V off

Connect PSU power to RRH Power connector

Connect BBU and RRH with Optic transceiver and Optic cable
RRH side; Blue Transceiver (1310nm)
BBU side; Yellow Transceiver (1550nm)

Turn on PSU to power up RRH

Make sure computer to join RRH and BBU network.
If the computer joined the same network which BBU joined, it is able to access RRH network from the GUI.
iDEN 800MHz RRH User Guide
3.
Network Configuration

Setup computer network configuration
IP: assigned by ALU (ex; 10.10.10.55)
Subnet mask: 255.0.0.0
Default gateway: assigned by ALU (ex; 10.10.10.1)
DNS: assigned by ALU

Test network configuration
Windows Start > Run > CMD [Enter]
C:\> ping RRH IP(10.14.0.196) [Enter]
iDEN 800MHz RRH User Guide
4.
Operate GUI Program

Run GUI Program.
Input RRH’s IP and click the Connect button

Setup the carrier configuration on the index to turn on carrier power.
If you want to make LTE single carrier configuration, please follow below setting and click (A) SET button.
Ex) 1FA setup with LTE signam on Index 3 (Tx; 865.4MHz, Rx; 820.4MHz)
Index : 3
STATE : [v] Enable
TXCONTAINER : [v] 2
TX2CONTAINER : [v] 2
RX1CONTAINER : [v] 3
RX2CONTAINER : [v] 8
TXFREQ : [v] 865400
RXFREQ : [v] 820400
CARRTYPE : [v] LTE
iDEN 800MHz RRH User Guide

Change TXENABLE[v] from DISABLE to ENABLE and click (B)SET button to turn on RF Power
iDEN 800MHz RRH User Guide

If you set up Signal Analyzer, you can monitor carrier power just like below image.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 8
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Test Procedure
Author                          : KH Shin, Andy Ku
Subject                         : RRH300
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2013:02:21 18:51:48-08:00
Modify Date                     : 2013:02:21 18:51:48-08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools