Keymat Technology DS60 AXS Series S60 iClass SE PIN-Multiclass Contactless Reader User Manual DS60 xx 08KT
Keymat Technology Ltd AXS Series S60 iClass SE PIN-Multiclass Contactless Reader DS60 xx 08KT
Contents
- 1. Users manual
- 2. Users manual - Datasheet
Users manual - Datasheet
AXS Series – S60 Keypad This mullion format integrated keypad and contactless reader is rated for continuous outdoor use in exposed, unsupervised locations. Featuring genuine HID® iCLASS SE®, Seos®, contactless technology, this access control keypad offers enhanced security by dual factor authentication. Additionally available with HID® multiCLASS SE® for legacy 125kHz technology. Authorized access through a secured door or barrier can be gained by entry of a valid PIN and/or presentation of an authorised contactless credential. Installation Fix the rear plate to the wall with 2 x screws Make the wiring connections to the keypad Set the rear halo illumination switch (default is ON, colour is blue) Fit the keypad to the rear plate : locate at top and then push to engage clip ( If you need to remove then use the supplied tool to disengage the clip) Wiring Connections +12 V LED BEEPER 0V TAMPER Weigand 0 Weigand 1 Weigand Format for PIN Factory default is Weigand 4 bit burst format (for PIN). If you need other Weigand formats follow the sequence below. (to set site code on 26/32 bit refer to the S60 Engineering Manual) Press # on power up , LED FLASHES RED/GREEN Press #725 to enter format mode Press 1 for FORMAT Press 1 or or or for for for for Press 0 to EXIT, 4 BIT FORMAT 8 BIT FORMAT 26 BIT FORMAT 32 BIT FORMAT LED STAYS RED Specification Card Compatibility Card Read Range Credentials Card Security Coupling Frequency Supply Dimensions Tamper detection Status Indication iClass® , Mifare® , ISO15693, ISO14443A & B 2-11cm (depending on card) iClass®, SEOS®, Mifare Classic,Plus & Ultralight, Desfire 0.6 & EV1 V1 Security (Elite to special order only) 13.56 MHz 12V DC +/- 15% at 500mA max 205mm H x 45mm W x 21mm D (max) Either normally open or normally closed (set by wiring connections) RED/GREEN as driven by the Controller (as supported by the controller) Performance Operational Temp Weather Resistant Vibration & Shock Impact Resistance Certification Order Codes -35°C to +70°C IP65 ETSI 6M3 IK09 (10J Rating) CE / FCC / IC / UL294 DS601K20 DS602W20 AXS Series S60 iClass keypad, metal keys, mullion format AXS Series S60i iClass keypad, illuminated keys, mullion format DS601K2P DS602W2P AXS Series S60M Multiclass keypad, metal keys, mullion format AXS Series S60iM Multiclass keypad, illuminated keys, mullion format. FCC ID 2AEEZ-DS60. Industry Canada IC 20014-DS60. This device complies with Part 15 of the FCC Rules and Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HID ®, Seos® and iCLASS SE® are trademarks of HID Global Corporation / ASSA ABLOY AB. Storm, Storm Interface and Storm AXS are trademarks of Keymat Technology Ltd. DS60-xx-08KT Rev 1 Sep 2015 Page 1 of 1 For more information visit www.storm-interface.com © Copyright Storm Interface. 2015. All rights reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : johns Create Date : 2016:04:04 11:09:54+01:00 Modify Date : 2016:04:04 11:09:54+01:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - DS60-xx-08KT Creator : johns Document ID : uuid:1caf23c8-297c-43d9-9449-b94bb4a5a12f Instance ID : uuid:6fc0a642-11f8-4887-ada1-b55478796761 Page Count : 1EXIF Metadata provided by EXIF.tools