Koden Electronics RB719A Marine Radar RA55 User Manual C12 5 4Setup Menu 2
Koden Electronics Co., Ltd Marine Radar RA55 C12 5 4Setup Menu 2
Contents
C12
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 267659 |
| Application ID | 15BrssjqKonjA9rSBmf+vw== |
| Document Description | C12 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 4.82kB (60192 bits) |
| Date Submitted | 2002-09-03 00:00:00 |
| Date Available | 2002-11-25 00:00:00 |
| Creation Date | 2002-08-28 12:56:00 |
| Producing Software | Acrobat PDFWriter 4.0 Windows NT |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | C12_5_4Setup_Menu-2.PDF |
| Document Creator | C12_5_4Setup_Menu-2.rtf - Microsoft Word |
| Document Author: | 109983 |
5.5.4 SETUP Menu Press the "MENU" key and select "SETUP" from the four displayed menus by using the left or right arrows on the cursor pad. Highlight a specific item in the SETUP menu using the updown cursor pad keys, and then press "ENT" to reveal the box containing further menu choices. Left/Right MENU (Select SETUP) 5.5.4.1 Selecting the screen display (WINDOW) There are seven selectable screen configurations on the RA40/RA41/RA42/43/44: 1) PPI screen with navigation data and soft keys 2) PPI screen & SEMI3D screen with navigation data and soft keys 3) Two PPI screens, each of which can display a different range setting 4) PPI screen & large character navigation screen 5) Full-screen PPI display without nav data or soft keys 6) Full-screen of two PPI displays 7) MOB position data screen . 75 .25 SETUP MARK HU PPI SEMI3D / PPI PPI / PPI PPI / NAV ALL PPI ALL PPI/PPI MOB >>>> 0.23NM Up/Down ECHO NAV ENT Up/Down (Select WINDOW) Functions Available On Each Screen SCREEN PPI PPI/SEMI3D ITEM PPI/NAV RANGE ¡ ¡ VRM1, EBL1 ¡ ¡ VRM2, EBL2 ¡ ¡ FL VRM2/EBL2 ¡ RINGS ON/OFF ¡ ¡ ZOOM, OFF CENT ¡ ///CSR ¡ ¡ HDG OFF ¡ ¡ STERN M ¡ ¡ NORTH M ¡ ¡ GAIN, STC, FTC ¡ ¡ TUNE ¡ ¡ ST ¡ ¡ GZ ¡ ¡ SEL WIN TXON/OFF ¡ ¡ (Select PPI) ENT (a) (Select PPI+SEMI3D) ENT (b) (Select PPI+PPI) ENT (c) (Select PPI+NAV) ENT (d) (Select ALL PPI) ENT (e) (Select ALL PPI+PPI) ENT (f) (Select MOB) ENT (g) PPI+PPI ALL PPI ALL PPI PPI MOB ¥ ¡ ¡ ¡ ¡ ¥ ¡ ¡ ¥ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¥ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¥ : Independent control on both screens using SEL WIN o : Can only be used on a PPI screens RA51/52/53/54/55 INSTRUCTION MANUAL – 05 SETUP WINDOW SEL WIN PICTURE SYSTEM CHECK CUSTOM ¡ : Simultaneous control on both screen X : Cannot be used 51 .75 Screen Modes and Operations (a) PPI Screen .25 HU All functions can be used on this screen. PPI Screen (b) PPI/SEMI3D Screen Simultaneous control of both screens at one time with controls, such as EBLs and VRMs. ZOOM, OFF-C, FL EBL2, and FL VRM2 cannot be used on this mode. The "SEMI3D" screen always displays the boat's heading at its center. .75 .25 HU S 280 320 000 040 080 PPI/SEMI3D Screen (c) PPI/PPI Screen The radar picture is alternately refreshed with a separate scanning interval for each PPI screen. While one image is being refreshed, the other is held static. When cruising at higher speeds, we recommend using a single PPI screen for continuous real-time imaging. Picture drawing (refreshed) LEFT screen RIGHT screen /--------/*******/--------/******/--------/****** ******* /--------/******/--------/******/--------/ t→ Displayed previous picture (hold) ZOOM, OFF-C, FL-EBL2, and FL-VRM2 can not be used on this screen. RANGE, GAIN, STC, FTC, and GZ can be used independently for each by pressing the "SEL WIN" button. The cross cursor will be displayed on the selected screen and the range indicator will be highlighted. .75 . 25 HU S 24 6 .75 . 25 HU S 24 6 Left GAIN in reverse 55/35 35/AT 35/AT LEFT screen is selected 55/35 35/AT 35/AT LEFT GAIN is active When adjusting GAIN, STC, or FTC in a dual screen mode, only the radar image of the screen being adjusted is refreshed. The other is held static. Approximately five seconds after you press "ENT" to save the adjustment, both screens will be refreshed in their normal sequence. Determining distance with VRM1 on LEFT screen 1) If the RIGHT range indicator is highlighted, change to the LEFT screen with "SEL WIN". 2) Press the "VRM1" key. The VRM distance in the lower left of the screen will be highlighted. 3) Rotate the control knob to determine the distance to a target. .75 .25 HU S 55/35 35/AT 35/AT 1 0.00NM Determining the distance with VRM1 on LEFT screen In the dual screen mode, VRM2, EBL1, or EBL2 also work the same way. 52 RA51/52/53/54/55 INSTRUCTION MANUAL – 05 (d) PPI/NAV Screen .75 .25 HU S NAV DISPLAY WAY P Note: The ZOOM, OFF-C, FL EBL2, and FL VRM2 do not work in this mode. 123.4° 6.8NM COURSE 2.38NM XTE <<< HDG 267.3°T SPD 12.8KT TEMP 20.8°C DEPTH 58.3M LAT 34°08.22N LON 138°02.53E PPI/NAV screen (e) ALL PPI Screen The range, range ring interval and display mode are displayed in the upper-left corner of the screen. To return to a normal PPI screen, press any key except "MENU", "RANGE UP", "RANGE DOWN", "BRILL", or "POWER". . 75 . 25 HU S ALL PPI screen (f) ALL PPI/PPI Screen The range, range ring interval and display mode are displayed in the upper-left corner of the screen. To return to a normal PPI screen, press any key except "MENU", "RANGE UP", "RANGE DOWN", "BRILL", or "POWER". The radar picture is alternately refreshed with a separate scanning interval for each PPI screen. While one image is being refreshed, the other is held static. When cruising at higher speeds, we recommend using a single PPI screen for continuous real-time imaging. .75 .25 HU S ALL PPI/PPI screen (g) MOB Screen When you press the "MOB" key, the MOB screen appears. It displays both your present position and the position of your boat when you pushed the button. Press the "MOB" key to clear the MOB position and return to the previous screen. Press "ENT" to return previous screen but keep the MOB position data. .25 .125 MAN OVERBOARD MOB POS 37°08.42N 142°03.33E SHIP’S POS 37°12.42N 142°04.33E PRESS MOB KEY TO DATA CLEAR PRESS ENTER KEY TO RETURN RA51/52/53/54/55 INSTRUCTION MANUAL – 05 53 5.5.4.2 Switching screens on PPI/PPI screen (SEL WIN) "SEL WIN" switches the active screen to operate functions such as RANGE, GAIN, STC, FTC, VRM1/2, EBL1/2, and guard zone. The range indicator of active screen is highlighted. Range display on the active screen become a reverse display .75 .25 .5 .25 .75 .25 HU S .5 .25 5.5.4.3 Reversing the screen (PICTURE) You can reverse the screen display for better viewing at night or to suit ambient lighting conditions. Select PICTURE from the SETUP menu and press "ENT". Select either DAY or NIGHT. Up/Down ENT Up/Down (Select PICTURE) (Select DAY) ENT Day display (Select NIGHT) ENT Night display . 75 75 . 25 HU . 25 HU DAY display NIGHT display 5.5.4.4 Slave Display Operation It is possible to utilize a slave radar display as a repeater for the RA4x(C) radars. However, there are limitations to this configuration. The master display unit must be set to the single PPI mode only, in order for the slave to operate properly. Additionally, the slave display will have reduced target performance if operated outside the range setting of the master. The slave radar display must be set to “MONI” in the “SETUP”, “CUSTOM” and “PRESET 2” menu. See 5.5.4.6.3. 5.5.4.5 Fault Diagnosis by Self Check (SYSTEM CHECK) SYSTEM CHECK helps you to identify a problem with your system. (1) Select SYSTEM CHECK the SETUP menu and press “ENT”. (2) The self-check will take a few seconds to run. OK indicates the item is operating properly. NG means it is faulty. (3) You can test the functioning of the front panel buttons by pushing them. If they are working properly, their corresponding icons will be highlighted. Rotating the control knob will make a line move inside the box on screen. (4) Press the "POWER" key to return to the previous screen. 54 RA51/52/53/54/55 INSTRUCTION MANUAL – 05 SYSTEM CHECK MENU MEMORY CHECK a) ROM ---------------------------------------- > ROM b) RAM ---------------------------------------- > RAM c) Backup memory ----------------------- > BACKUP OK OK OK SIGNAL CHECK d) Transmit trigger ------------------------ > (1) TRIGGER e) Bearing pulse --------------------------- > (2) AZIMUTH f) Heading pulse -------------------------- > (3) HM g) +5Vvoltage--------------------------- > (4) +5V h) High voltage(at scanner) ----------- > (5) H.T. AT SU i) High voltage(at display) ------------ > (6) H.T. AT DU j) Magnetron current -------------------- > (7) MAG. CUR. k) Tuning voltage ------------------------- > (8) TUNE l) Motor power supply ------------------ > (9) MOTOR PS OK OK OK OK OK OK OK OK OK m) Cumulative usage time ---------> HOURMETER Operation time ------------------------ > OPERATE Transmit time ------------------------- > TRANSMIT n) ROM version -------------------------> ROM VERSION o) Scanner type -------------------------> 4 KW OPEN ENT Indicates the cursor status. RNG U RNG D 5.2V 253.2V 253.2V 2.1 BRILL AUTO 40.0 V GAIN STC 12.0H 10.3H V1.00 POWER FTC MOB CONTROL KNOB PRESS POWER KEY TO RETURNKEY TO RETURN SYSTEM CHECK screen a) b) c) d) p) Indicates the operation status of front-panel key Indicates the control knob status. ROM RAM Backup memory Transmit trigger Indicates the ROM status. Indicates the RAM status. Indicates the backup memory status. Indicates the signal line status for the trigger signal sent from the scanner unit. e) Bearing pulse Indicates the signal line status for the bearing signal sent fron the scanner unit. f) Heading pulse Indicates the signal line status for the bow signal sent from the scanner unit. g) +5V voltage Indicates the reference voltage status of the video circuit and its voltage value. (normally about 5 V) h) High voltage(at SU) Indicates the status of the high voltage supplied from the display unit to the scanner unit and its voltage value (normally about 250 V) at scanner unit. i) High voltage(at DU) Indicates the status of the high voltage supplied from the display unit to the scanner unit and its voltag value (normally about 250 V) at display unit. j) Magnetron current Indicates the status of the anode current flowing in the magnetron and its current value. k) Tuning voltage Indicates the status of the voltage used for tunning. l) Motor power supply Indicates the status of the scanner motor power supply (normally (6 kW/12 kW type only) about 40 V). m) Cumulative usage time Indicates the cumulative time your radar is used. OPERATE : Duration of time during which the power supply is turned on. TRANSMIT : Duration of time transmitting. n) ROM version Indicates the ROM software version. . o) Scanner type Indicates the Scanner type ex. 4 KW OPEN p) Front-panel keys As you press any front-panel key when the SYSTEM CHECK screen is on, the corresponding key is highlighted on the screen by displaying it in reverse video. RA51/52/53/54/55 INSTRUCTION MANUAL – 05 55
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 5 Creator : C12_5_4Setup_Menu-2.rtf - Microsoft Word Create Date : 2002:08:28 12:56:00 Title : C12_5_4Setup_Menu-2.PDF Author : 109983 Producer : Acrobat PDFWriter 4.0 Windows NTEXIF Metadata provided by EXIF.tools