Koden Electronics RB719A Marine Radar RA55 User Manual C11 5 3 EchoMenu 0306

Download:
Mirror Download [FCC.gov]
Document ID	267658
Application ID	15BrssjqKonjA9rSBmf+vw==
Document Description	C11
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.59kB (44854 bits)
Date Submitted	2002-09-03 00:00:00
Date Available	2002-11-25 00:00:00
Creation Date	2002-08-28 12:54:06
Producing Software	Acrobat PDFWriter 4.0 Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	C11_5_3 EchoMenu-0306.PDF
Document Creator	C11_5_3 EchoMenu-0306.rtf - Microsoft Word
Document Author:	109983

5.5.3 Echo Menu
xxx = keys to press
Press the "MENU" key and select "ECHO" from the four displayed menus by using the left or
right arrows on the cursor pad. The contents of the selected MENU will reveal beneath its
name when it's highlighted.
MENU
Left/Right
(Select ECHO)
.7 5
.2 5
HU
AT
ECHO
ECHO
NAV
MARK
>>>
0.23 NM
SETUP
GAIN
STC
FTC
TUNE
ST
AUTO
MANU
5.5.3.1 Sensitivity adjustment (GAIN)
(1) Select GAIN from the menu and press "ENT".
(2) Select MANU from the MANU/AUTO box and press "ENT".
(3) The current GAIN setting is highlighted in the middle of the
left side of the screen. Use the control knob to adjust the
gain setting through a range of 0 to 99.
(4) Press "ENT" to exit the gain setting mode.
To set the radar to automatic sensitivity adjustment, select
AUTO in (2) and press "ENT".
ENT
Up/Down
(Select GAIN)
Up/Down
(Select MANU)
56
The setting value is displayed during MANUAL operation.
AT is displayed during AUTO operation.
(The same applies to STC, and FTC.)
Control knob
ENT ----------------Set to MANU mode
(GAIN adjustment)
(Select AUTO)
ENT ---------------------------------------- Set to AUTO mode
5.5.3.2 Removing sea clutter (STC)
(1) Select STC from the menu and press "ENT".
(2) Select MANU from the MANU/AUTO box and press "ENT".
(3) The current STC setting is highlighted in the middle of the
left side of the screen. Use the control knob to adjust the
STC setting through a range of 0 to 99.
(4) Press "ENT" to exit the STC setting mode.
56
The setting value is displayed during MANUAL operation.
AT is displayed during AUTO operation.
Up/Down
(Select STC)
ENT
Up/Down
(Select MANU)
ENT
Control knob
ENT
Set to MANU mode
(STC adjustment)
(Select AUTO)
ENT
Set to AUTO mode
Note 1: When you select the MANU mode, GAIN and FTC will be switched to MANU mode, also.
2: When you select the HARBOR mode, only FTC will be switched to MANU mode
RA51/52/53/54/55 INSTRUCTION MANUAL – 05
47
5.5.3.3 Removing rain and snow clutter (FTC)
(1) Select FTC from the menu and press "ENT".
(2) Select MANU from the MANU/AUTO box and press "ENT".
(3) The current FTC setting is highlighted in the middle of the
left side of the screen. Use the control knob to adjust the
FTC setting through a range of 0 to 99.
(4) Press "ENT" to exit the FTC setting mode.
Up/Down
ENT
56
The setting value is displayed during MANUAL operation.
AT is displayed during AUTO operation.
Up/Down
(Select FTC)
ENT
(Select MANU)
Control knob
ENT ------- Set to MANU mode
(FTC adjustment)
ENT ------------------------------------------- Set to AUTO mode
(Select AUTO)
5.5.3.4 Adjusting receiver tuning (TUNE)
(1) Select TUNE from the menu and press "ENT".
(2) Select MANU from the MANU/AUTO box and press "ENT".
(3) The current TUNE setting is highlighted in the upper right corner of the screen. Use the
control knob to adjust the setting through a range of 0 to 99.
(4) Press "ENT" to exit the TUNE setting mode.
Up/Down
ENT
(Select TUNE)
Up/Down
(Select MANU)
ENT
Control knob
ENT ----Set to MANU mode
(TUNE adjustment)
(Select AUTO)
ENT
--------------------------------------- Set to AUTO mode
35
Indicated setting value on manual mode,
AT on auto mode
5.5.3.5 Echo expansion (ST)
This function expands or stretches the echo in a direction away from your boat. It is used to
better define smaller targets. There are two levels of echo expansion, ST1 and ST2.
(1) Select ST1 from the ECHO menu and press "ENT".
(2) Select ST1 or ST2 from the box and press "ENT".
Up/Down
ENT
Up/Down
(Select ST1)
ENT
set ST1
(Select ST2)
ENT
set ST2
(Select OFF)
ENT
ST OFF
(Expansion rate ST1
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Creator                         : C11_5_3 EchoMenu-0306.rtf - Microsoft Word
Create Date                     : 2002:08:28 12:54:06
Title                           : C11_5_3 EchoMenu-0306.PDF
Author                          : 109983
Producer                        : Acrobat PDFWriter 4.0 Windows NT

EXIF Metadata provided by EXIF.tools