Koden Electronics RB719A Marine Radar RA55 User Manual C15 5 4 6 3Preset2 1

Download:
Mirror Download [FCC.gov]
Document ID	267662
Application ID	15BrssjqKonjA9rSBmf+vw==
Document Description	C15
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.66kB (20720 bits)
Date Submitted	2002-09-03 00:00:00
Date Available	2002-11-25 00:00:00
Creation Date	2002-08-30 17:19:27
Producing Software	Acrobat PDFWriter 4.0 Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	C15_5_4_6_3Preset2-1.PDF
Document Creator	C15_5_4_6_3Preset2-1.rtf - Microsoft Word
Document Author:	109983

5.5.4.6.3 Changing the settings in PRESET2 screen
(1) Press the "MENU" key, select SETUP>CUSTOM>PRESET2, and press "ENT". This will
open a screen for setting various preset parameters that control the operation of your radar.
(2) Select items with the up-down cursor pad keys and options with the left-right keys.
The selected item will be enclosed in a frame and the current option setting will be
highlighted.
(3) After you've completed making settings, exit from the PRESET2 screen by pressing "ENT".
PRESET2
a) Guard Zone Level
b) Guard Zone Mode
c) Hold
d) Display Unit Mode
e) External Buzzer
f) Bearing pulse/rot (IN)
g) Bearing pulse/rot (OUT)
h) Built-in Simulator
i) Interference Rejection
j) Ship's Speed
k) Indication Language
GZ LVL
GZ MODE
IN
OUT
HOLD
ON
OFF
DISPLAY
RDR
MONI
NAVI
EXT BUZ
OFF
CONT
INT
IN P /R
1080
1024
2048
4096
360
OUT P/R
1080
1024
2048
4096
360
LOG
200P
DEMO
ON
OFF
IR
OFF
IR1
SPD SET
NMEA
MANU
LANGUAGE
l) Scan speed
IR2
0.0KT
CHI
DAN
FRE
GER
GRE
ITA
JPN
ENG
KOR
NOR
POR
RUS
SPA
SWE
TUR
THA
m) Echo Color
SCAN SPEED
STD
COLOR
MONO
HIGH
MULTI
a) Guard Zone Level
j)
Guard zone detection level setting. 1: High sensitivity for smaller targets
through 7: to sense large targets only
Guard Zone Mode
Guard zone detection mode setting
IN: ----- Detect target when it moves inside the zone
OUT: -- Detect target when it leaves target zone
Hold
Hold the radar image for 30 seconds after you switch to ST'BY.
The EBL and VRM can be used in HOLD state.
Display Unit Mode
Display unit operation mode setting
RDR: -- Radar mode(normal)
MONI:- Monitor mode (for slave display use)
NAV: -- Navigation mode (for DATA indicator use)
External Buzzer
External buzzer control setting
OFF: -- Buzzer off
CONT: Continuous tone
INT:---- Intermittent tone
Bearing pulse/rot.(IN) To change the setting when connected to another type of radar in
monitor mode.
Bearing pulse/rot.(OUT) To change the setting when connected to another type of radar monitor
unit
Built-in simulator
Demonstration mode
Interference Rejection Reject interference from other radars nearby
OFF: -- IR OFF
IR1:---- ON level 1
IR2:---- ON level 2
Boat Speed
How the radar will determine and display your boat's speed
60
RA51/52/53/54/55 INSTRUCTION MANUAL – 05
b)
c)
d)
e)
f)
g)
h)
i)
k) Display Language
l) Scan Speed
m) Echo Color
NMEA:-Data input from NMEA port
MANU:-Set speed manually with the control knob
LOG: Speed input from dry contact log (Select input pulse rate with
control knob)
CHI: Chinese
KOR: Korean
DAN: Danish
NOR: Norwegian
ENG: English
POR: Portuguese FRE: French
RUS: Russian
GER: German
SPA: Spanish
GRE: Greek
SWE: Swedish
ITA: Italian
TUR: Turkish
JPN: Japanese
THA: Thai
Scanning speed setting
STD: --Standard
HIGH: High
( This setting can be changed only in the stand-by mode.)
Video presentation switch
MONO: Yellow or Green monochrome
MULTI: Red to Green multi-color
HOLD function
POWER = POWER key to press
The HOLD function is only available in standby mode that momentarily freezes the radar picture.
In this mode, you can use VRMs and EBLs and, as far as the operation continues the picture
stays frozen. If you leave these controls, the timer starts to count and after 30 seconds the screen
will be put back automatically to normal ST’BY mode.
Setting HOLD
↓
(Under Tx)
POWER
(Operation)
↓
↑<-------Under HOLD mode--->↑<-----------ST’BY DISPLAY? ? ? -Turn to transmission off
EBL,VRM operation:X seconds
X+30seconds
↓
(Time used)
NOTE: EBL and VRM function is usable in HOLD state.
“HOLD” is displayed and blinks.
HOLD
Setting
HOLD
Tx OFF
X+30sec
ST’BY
EBLs and VRMs can be used to locate a target.
RA51/52/53/54/55 INSTRUCTION MANUAL – 05
61

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : C15_5_4_6_3Preset2-1.rtf - Microsoft Word
Create Date                     : 2002:08:30 17:19:27
Title                           : C15_5_4_6_3Preset2-1.PDF
Author                          : 109983
Producer                        : Acrobat PDFWriter 4.0 Windows NT

EXIF Metadata provided by EXIF.tools