Kondo Kagaku T125003 Remote Control Transmitter User Manual manual 27 51

Download:
Mirror Download [FCC.gov]
Document ID	348595
Application ID	hRzULgCBI3DH0AMC5s2lXA==
Document Description	manual 27 51
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	196.79kB (2459918 bits)
Date Submitted	2003-08-15 00:00:00
Date Available	2003-08-15 00:00:00
Creation Date	2003-08-06 14:18:17
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-08-06 14:18:36
Document Title	manual 27 51

Main menu(2)
Back Key
27
Enter Key
Menu deletion
+/- Key
Reset
transmitter
It is the menu displayed when "Enter" is pushed from the initial screen.
Usage of the
JogDial
Delete the function from the menu list.
CUSTOM1 and CUSTOM2 can be delete.(It is not possible to delete MASTER)
Select the added list name.
Move the cursor to either of CUSTOM1 or CUSTOM2
with Jogdial or +/- key and push "Enter"
the function name that needs to be deleted and push
"Enter". Even if the deletion ends, it is possible to delete
it continuously.
Main Menu
Select function name
The cursor moves with Jogdial or the +/- key. Select
Features
Select list name
Function Menu
Connecting
the receiver
Notes on
installing
Description
Index
DRAFT
JogDial
+/- Key
Reset
transmitter
Usage of the
Features
Main Menu
Function Menu
Connecting
the receiver
Notes on
installing
Description
Index
DRAFT
Back Key
MAIN MENU (3)
28
Enter Key
MAIN MENU (4)
Back Key
29
Enter Key
CONTRAST (LCD Contrast)
+/- Key
Reset
transmitter
It is the menu displayed when "Enter" is pushed from the initial screen.
Usage of the
JogDial
Adjust contrast of LCD display.
can adjust contrast at 8 stages.
Adjusting the contrast to a very light setting in a high temperature
Features
Use "Jog dial" key or "+,-" keys. to adjust contrast of LCD display.
room may cause characters to become invisible at low temperatures
BUZZER Setting about the buzzer sound which a system sounds. Three setting about a buzzer.
BUZZER TONE
ALARM BUZZER
A buzzer sound sounds in various Sheen, but it
is setting about that buzzer sound
CUSTOM TONE
Can edit or create the tone.
Connecting
the receiver
BUZZER TONE
Jog Dial or +,- keys to adjust the interval of the buzzer.
ALARM BUZZER
Function Menu
Adjust An interval of a buzzer. An interval of
normal beep sound changes.
Main Menu
out doors. please be careful.
Push "Enter" key at each item, cursor will change from
after change cursor use Jogdial or +,- keys to change the setup.
Notes on
installing
Up Timer
SYS: System default tone
CS1: Custom Tone 1
CS2: Custom Tone 2
CS3: Custom Tone 3
Down Timer
CS4: Custom Tone 4
CS5: Custom Tone 5
CS6: Custom Tone 6
Power Alarm
UP Timer
LAP.T
Lap Timer
DOWN.T
Down Timer
POWER
Power Alarm
BATTERY
STARTUP
Startup
DRAFT
Battery Alarm
Startup
Index
Battery Alarm
UP.T
Description
Lap Timer
MAIN MENU (5)
30
Back Key
Enter Key
transmitter
Usage of the
JogDial
Custom tone editor
+/- Key
Reset
Move the cursor to the custom(1 to 6), using Jog
Dial or "+,-" keys.
Features
In this example there is no data yet.
Back to select number
Main Menu
Change data
pointing cursor
Return to Select
number
Use Jog dial or "+,-" keys to choice the sounds. and
push Enter key. (A to Z.see down for details)
The upper part is an
interval.
The lower part is
length of a sound.
Function Menu
Cursor move to the next row to choice the lenght of the
Return to Select
number
sounds. (1 to 8)
Display the position
of sounds now.
When push Enter key, cursor will move to next line.
Return to Select
number
Connecting
the receiver
Push reset key (push + and - keys Together) to clear the data after
the cursor.
A real interval and relation with indication seem to become follows.
Notes on
installing
Interval
Name of musical
pitch
Description
LCD indication
In LCD indication.
(Point) means Long silence (a rest).
Length of a sound
Note
LCD indication
Index
Length of each note is fixed. Tempo become
The input example
DRAFT
=120
MAIN MENU (6)
Back Key
31
Enter Key
BACK LIGHT
+/- Key
Reset
Set the lighting method of the backlight.
transmitter
This is the menu displayed when "Enter" is pushed from the initial screen.
Usage of the
JogDial
Can choose from "AUTO" and "OFF".
was done. or, when "auto display" are active.
When didn't operate any key, the light will be
Change Setting
Setting will change when you
pushed Enter key or Back key.
off. (around 3 sec.)
(Factory default is AUTO.)
Function Key, ET lever, BT button.
Function Menu
Setting of backlight doesn't turn on even "Auto". besides a
Main Menu
OFF: Back lights are always off.
Features
AUTO: lighting the display When key function
Connecting
the receiver
Notes on
installing
Description
Index
DRAFT
MODEL SELECT
32
Back Key
Enter Key
transmitter
Usage of the
Select model memory
JogDial
Can save the setting for 9 car
+/- Key
Reset
[How to open the screen]
Features
Use Jog dial or "+,-" keys to select MODEL SELECT at
function menu. then Push "ENTER" key
In MODEL SELECT Screen. Control Jog dial or +,keys to move the cursor at left side
Main Menu
Push Enter at the MODEL number to select.
Back to function menu with out any changes when push BACK key.
Function Menu
Can put a name at Model memory (max 10 character)
Memory of unit display at 1 to 9. A to P for Data Pack.
It is usable to assign each car the each number.
Even same car, can change the Setting every course.
It is cause of out of control when Changing Model memory while running.
Connecting
the receiver
Model memory 0(Zero)
Model 0 will display when do this control as follow.
When model memory in data pack was used, and it was switched off, and data pack was pulled,
Notes on
installing
and it was switched on
When remove the DATA PACK while using MODEL MEMORY of DATA PACK
Model memory 0 use for avoid Lost the data
Model memory 0 use for avoid Lost the data
Description
Do following procedure to back to Ordinarily MODEL MEMORY. don't come back unless this
operation is done
Use Model select function to change to other Model memory
(Data in Model memory 0 will lost)
Index
Copy the Setup of MEMORY 0 to other memory by MODEL
COPY (page 53)
advice
Setup at Function menu. that can save at MODEL MEMORY
Can not set per Model memory the setup at main menu (see page 26).
ET POSITION
Back Key
33
Enter Key
+/- Key
Reset
[How to open the screen]
At ET POSITION they displaed function name assigned
and the value of each setup.
Can change the assigned button to other button when use SET UP function (see page 60)
AUTO DISPLAY
DIRECT SET
If a function is assigned to an ET lever, control contents of a controlled lever are displayed automatically.
[Sample]
Connecting
the receiver
When the lever which a function is assigned to is controlled, contents
are displayed automatically.
Function Menu
When control the ET. The Auto display will activate,
Main Menu
Push BACK key to return to initial screen.
Features
From initial screen. use "Jog dial" key or "+,-" keys. to
open Function menu.
Select ET POSITION then push ENTER.
transmitter
Can confirm the function name and value of setup
Can not adjust the setup from this function.
JogDial
Usage of the
Confirm Position of ET rever.
ET1 : Display Steering Trim.
AUTO DISPLAY didn't function when display the MAIN MENU (see page 26)
AUTO DISPLAY didn't function when display the SET UP (see page 60)
Can adjust the Steering balance to Push ET that assigned Steering trim then control the steering to right or left. it's
Description
An original screen is returned to in about 3 seconds
Push BACK key to returened to original screen.
Notes on
installing
ET4 : Steering Travel.
call Direct set.
Index
advice
When persentage is . the function was not working
sample: Steering travel is
Steerring wheel not working In this case.
SUB TRIM
34
Back Key
Enter Key
transmitter
Usage of the
Adjust the steering and throttle
JogDial
can not put to the center point of neutral position of servo, when only using the linkage of car.
+/- Key
Reset
[How to open the set-up screen.]
Features
Main Menu
Function Menu
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list.
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust
Connecting
the receiver
the value.
The cursor will change from to . Adjust the value using by Jog dial or +,- keys.
Push + and - keys together to reset the value to .
Push Enter or Back key to done the setup.
Notes on
installing
Push Back key to return to Initial screen.
What is sub trim
Usually set the neutral of servo when put at car the servo, then adjust linkage. Use Sub trim to fine
adjustment
Description
Different of trim and sub trim
Sub trim are not only the center point of servo, it is changed also the movement angle.
Trim
(Center Trim)
SubTrim
Index
See page 23 for more details
advice
When getting bigger the value of sub trim please adjust the linkage and make it
smaller the value of sub trim.
DRAFT
A.B.S (Active Brake controll System) 1
Back Key
35
Enter Key
+/- Key
Reset
[How to open the set-up screen.]
transmitter
Foil locks it with brakes and is effective when posture of a car collapses.
As a result, a corner ring gets possible to be done smoothly.
JogDial
Usage of the
Pumping brake will activate, when use brake at throttle.
Features
Main Menu
Function Menu
Connecting
the receiver
Notes on
installing
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list.
ABS indicator get blink. when ABS are active.
Description
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
Can adjust the 5 parameter in ABS function.
Full brake are depend on to throttle brake (see Page 41).
DRAFT
Index
ABS Indicator
36
A.B.S (Active Brake controll System) 2
Back Key
Enter Key
transmitter
Usage of the
JogDial
ABS width and position
+/- Key
Reset
Set pumping
ABS movement will change at Control volume of
Time
throttle trigger and position of width. Base at Position
Features
of throttle triger. when width are 100. the servo move
Brake Max
Operating
Trigger
back to position to set, The servo didn' move back to
Braking
point to set when make small the value of width.
Neutral
Time
The movement of servo getting bigger, when the
Brake Max
Width
Main Menu
Servo
movement
value at position setup are small.
Pos (beginning)
BS doesn't function When set 0 to width, and then
A : B=Duty
Neutral
Cycle
Setting
ABS.WIDTH 50
ABS.POS
30
set position to 100.
Function Menu
ABS Cycle
Set cycle of pumping action.
When make large the value. the servo move fast and cycle become short.
Connecting
the receiver
ABS Delay
Set delay of ABS Action.
Make strong the brake when put the delay at this function
Notes on
installing
ABS Duty
Set ratio of time to brake and time to release the brake with 7 stages.
Description
advice
It will be easy to understand when servo connected instead of ESC at throttle
channel.
ABS function. it is depend at specification of servo.
Index
DRAFT
TH SPEED (Throttle speed) 1
Back Key
37
Enter Key
It to slow the changes of signal, to make easy to controll the car.
+/- Key
Reset
[How to open the set-up screen.]
transmitter
JogDial
Usage of the
Reaction velocity of a throttle is made late.
Features
Initial screen
Function menu
TH SPEED
Main Menu
Setup of SPEED and POSITION will change on setup of MODE.
Function Menu
In 1 WAY. can not select POSITION.
Connecting
the receiver
Indication of TH.POS
changes by a position
of trigger
Notes on
installing
Description
Index
Indication of TH.POS
changes by a position
of trigger
DRAFT
38
TH SPEED (Throttle speed) 2
Back Key
Enter Key
transmitter
Usage of the
JogDial
Throttle speed
+/- Key
Reset
When control the throttle quickly, the car might be out of control.
Use this function to limit the throttle speed.
Features
In this function can set Speed, Position, Mode.
The Speed and Position setup will depend at mode setup.
This function will effect when pull the trigger. It is not effective for Brake control.
Main Menu
MODE
Choose from 1 to 3 WAY
1 WAY: Use full area for the throttle trigger control
2 WAY: Divide to 2 areas the throttle trigger control
3 WAY: Divide to 3 areas the throttle trigger control
POSITION
Set the divition of area
Function Menu
The value of Position 1 are always same or smaller then
position 2.
SPEED
Connecting
the receiver
Set each speed of each
area
A setting item changes by setting value
Normally 100 is the Setting value. when make it smaller
the value reaction of servo getting smaller too.
Notes on
installing
Throttle Speed
Indicator
Description
When controll trigger position will appear
If throttle trigger are active the throttle indicator will blink
Can set at ET the speed of each aria (see page 60)
The value can set at ET are when set TH:SPEED at 100%
Index
Can assign ON/OFF function at ET or BT button.
Even the value are not effective the light will be blinking when ON the function.
advice
As same as Engine car, This function are functioning also at The Electric car that using ESC.
DRAFT
TH PUNCH (Throttle punch)
Back Key
39
Enter Key
When move the throttle to forward or to brakes. can skip the first field.
+/- Key
Reset
transmitter
JogDial
Usage of the
To adjust only an initial reaction of throttle.
[How to open the set-up screen.]
Features
When Push "Enter"
at each Item . the
cursor change to .
Main Menu
Function Menu
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "TH:PUNCH" from Menu list.
and then push "Enter" key.
Connecting
the receiver
Use Jog Dial or +,- keys to choice F(forward) or B(Brakes). then push "Enter"
to cursor change from to . and can adjust the value using Jog dial or +,keys.To reset. When cursor display , push +,- keys toghter.
Push "Enter" key. the cursor return to . When push Back Key after that the
display will return to menu list.
Notes on
installing
Setting value of throttle punch is in proportion to initial
movement. but when use combination of other setting, the
Can put the initial punch to Forward and backing of ESC,
in electric car.
ng
ti
et
Description
This function are useful to avoid time-lag of clutch meet
at Engine car.
ng
tti
Se
10
tt
50
check the movement carefully before use.
Servo Movement
When using combination with ABS function, please
throttle will move like a switches between two points.
Triger operation
advice
This function are useful to avoid time-lag of clutch meet at Engine car.
Can adjust starting point of brakes of engine car.
Can put the initial punch to Forward and backing of ESC, in electric car.
DRAFT
Half
Full Throttle
Index
Neutral
40
TH CURVE (Thorottle curve)
Back Key
Enter Key
transmitter
Usage of the
Put the curve on actual servo operation to the trigger operation of the throttle.
JogDial
In throttle operation, can be made quick or mild by hanging a curve to a signal. Besides, can
+/- Key
Reset
brakes made quick or mild by hanging a curve.
[How to open the set-up screen.]
Features
Main Menu
Function Menu
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "TH:CURVE" from Menu list. and then push "Enter"
key.
Quick
When push Enter key at F(Forward) or B(Brakes), cursor +100 Setting
change
to
. then can adjust the value using by Jog
Notes on
installing
dial or +,- keys.
Servo Movement
Connecting
the receiver
Push Enter key to start setup the Thorottle curve.
Mild
Description
Trigger operation
Neutral
Half
Setting value : + makes quick - makes mild.
Index
Quick curve : sensitive at initial response
Mild curve : insensitive at initial response
advice
When other functions are used together, please set up while confirming movement.
Only the curve can adjust at this function. to adjust throttle punch (Page 39) to be make
bigger the initial movement .
DRAFT
Full Throttle
TH BRAKE (Throttle Brake)
Back Key
41
Enter Key
Adjust only the brake of throttle. maximum brake will change.
+/- Key
Reset
[How to open the set-up screen.]
transmitter
JogDial
Usage of the
Adjust only the brake of throttle.
Features
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "TH:BRAKE" from Menu list.
In Electric car, When set value is too small the amplifier can not show better performance. Please start from
100 (factory setting) the setup.
When assigning ET lever, the contents of operation are automatically displayed only by operating a lever.
(AUTO Display) and Keep in mind that a brake does not work even if it enlarges the numerical value of this
function, when a setup with ET lever is 0%.
Description
Minimum value are 0, but doesn't operate to braking.
Notes on
installing
This function can be assigned and adjusted to ET lever. but It becomes a relative value over the value set up
on this screen. (It is assigned to ET-3 at the time of factory shipments.) Keep in mind that a brake does not
work even if it enlarges a numerical value, when a setup is 0.
Connecting
the receiver
When make large the value at Engine car, a burden of Servo to increase. please check the movement while
adjust the value.
Function Menu
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys, to adjust the value..
Main Menu
To Adjust the movement of servo,
of the time that push the trigger.
Index
advice
Can change the assigned button (ET-3) to other button when use SET UP function
(see page 60)
DRAFT
42
TH HIPOINT (Throttle high points)
Back Key
Enter Key
transmitter
Usage of the
Set only the value of forward movement, on the throttle.
JogDial
Set only the value of forward movement on the throttle. use this function. Electric car use
+/- Key
Reset
Highest point of ESC. Engine car use "High"
[How to open set-up screen]
Features
Main Menu
To Adjust the movement of servo,
of the time that pull the trigger
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "TH:HIPOINT" from Menu list.
Function Menu
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
Connecting
the receiver
Set only the value of forward movement on the throttle. It is easy to set up especialy on Engine car.
When make large the value at Engine car, a burden of Servo to increase. please check the movement while
adjust the value.
In Electric car, When set value is too small the amplifier can not show better performance. Please start from
100 (factory setting) the setup.
Notes on
installing
Description
Minimum value are 0, but doesn't operate to forward.
Index
advice
Throttle trim is a center trim.When made small the value of "TH HIPOINT".
and then, when set large value to an advance direction of the trim.the amount
of operation extremely will be small.(Please see page 23 about Center trim)
DRAFT
TH PRESET (Throttle Preset)
Back Key
43
Enter Key
Use this function to set at ET or BT button.
+/- Key
Reset
Can move at point you set when control the button assigned.
[How to open the set-up screen.]
transmitter
JogDial
Usage of the
Move the throttle servo to set point, using by ET or BT button.
Features
Main Menu
Use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list.
Function Menu
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list.
Other function for the throttle are not affected by this function. (If set at F100 when control ET or BT button, the
Connecting
the receiver
The range can setup 0 to F150 and 0 to B150
throttle will move to the set point, even TH:HIPOINT are 0.)
Trigger will not function and throttle is fixing at point while controlled the ET or BT button
Notes on
installing
It is useful for Engine cut, Idling up, Full brake, Move Backward
that assigned as preset.
Description
Please check the movement before use, to avoid lost control.
Index
DRAFT
44
TH ACCEL (Throttle Acceleration) 1
Back Key
Enter Key
transmitter
Usage of the
Set a awing at forward part of throttle.
JogDial
The expert driver using Delicate throttle work.
In this function do automatically to make faster the cornering of the car
+/- Key
Reset
[How to open the set-up screen.]
Features
Push enter at each item
to change the cursor
Main Menu
Function Menu
Connecting
the receiver
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "TH:ACCEL" from Menu list.
Notes on
installing
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
Time
Accelaration are off When WIDTH set at 0.
Maximum
Description
Accelaration are off when POS.LOW and POS.HIGH are
same
Operating
Trigger
Indicator will blinking when on the throttle accelaration.
Pull the triger
Neutral
Time
Maximum
Servo
movement
Index
Neutral
PosH
Width
Throttle Accelaration
Indicator
PosL
If you set this fanction that
POS L 10 POS H 80 the effect shown
Cycle
DRAFT
TH ACCEL (Throttle Acceleration) 2
Back Key
45
Enter Key
WIDTH(Width)
Set the swing width
transmitter
+/- Key
Reset
Setting Item
Usage of the
JogDial
POS.LOW(Low Position) Set the lower part of throttle trigger for swing action
CYCLE(Cycle)
Set the cycele of swing action
Range of setting value
Maximum
Minimum
Initial value
100
ACCEL POS.LOW
100
ACCEL POS,HIGH
100
50
ACCEL CYCLE
100
97
(Can not set higher value than POS.HIGH)
(Can not set lower value than POS.LOW)
Start swing action, When throttle trigger was position between POS.LOW and POS.HIGH.
"CYCLE" can adjust during running the cycle of swing action When assign this function to ET (From
ET1 to ET5)
Can assign to the BT1 or BT2, on/off of functions.
When activate on/off at BT button, then even if the setting are not effective (ex. "WIDTH" is 0),
Connecting
the receiver
Set the swing width at WIDTH. This function can adjust during running, when assign it to ET (from
ET1 to ET5) the "WIDTH" (set the "WIDTH" to 100)
Function Menu
ACCEL.WIDTH
Main Menu
Setting Item
Features
POS.HIGH(High Position) Set the upper part of throttle trigger for swing action
The Throttle Acceleration Indicator be flashing.
road surface, etc.)
Notes on
installing
A n Ideal setup isn't know till actual run. because it will change in various factors (Servo, Car,
Description
When set large value at set up, increase Consumption electric currents, It will
cause of damage to servo.
Index
advice
To use ET or BT with other function. Modified at "SET UP" function (page 60).
DRAFT
46
ST SPEED (Steering speed) 1
Back Key
Enter Key
transmitter
Usage of the
Make late the Speed of steering Servo.
JogDial
Limit the Max speed of Steering servo. Can set separately the Turn and Return.
Divide between center of neutral and maximum rudder angle. It is possible to set each angle. (2 WAY)
+/- Key
Reset
[How to open the set-up screen.]
Features
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Use "Jog dial" key or "+,-" keys. to choose the "ST:SPEED" from Menu list.
Main Menu
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
It can be chosen between
1 way and 2 way.
Function Menu
Displayed contents at "SPEED" and "POSITION" are change by setting value of MODE.
Connecting
the receiver
Can not set "POSITION"
at 1 WAY mode.
Use Steering to move to TURN2.
Notes on
installing
Can change the value, where cursor are pointing.
Description
Use Steering to move to RETURN2.
TURN1 at bottom row, By steering can
change to TURN2.
Index
RETURN1 at bottom row, By steering
can change to RETURN2
DRAFT
ST SPEED (Steering Speed) 2
Back Key
47
Enter Key
Time
Maximum
transmitter
+/- Key
Reset
Usage of the
JogDial
Operating
Wheel
Returning
Features
Turning
Neutral
Time
Maximum
Speed
changing
point
Servo
movement
Speed
ge of
Th Return1
Th
cha
sp
can ngin
ee
be g po
ad int
ra
jus
ted
Re ge
tu f
rn
eed ran
The sp
ge of
Th Turn1
Th
cha
sp
can ngin
ee
be g po
ad int
ra
jus
ng
ted
Tu of
rn
eed ran
The sp
Neutral
End
End
Function Menu
Neutral
Setting
Main Menu
Neutral
Connecting
the receiver
1WAY 1 WAY: become same speed in whole area. Can set each TURN and RETURN speed. In 1way,
displayed POSITION but isn't functioning. (Can't be chosen)
Notes on
installing
Display contents at "1 way" and "2 way" are different by setting item of MODE.
2WAY To set the position can assign by two areas.
Description
An Ideal setup isn't know till actual run. because it will
change in various factors (Servo, Car, road surface, etc.)
Index
advice
It is totally different about result of this function by speed spec of servo.
DRAFT
48
ST PUNCH (Steering Punch)
Back Key
Enter Key
+/- Key
Reset
[How to open the set-up screen.]
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
To reset the value Push together "+,-" keys.
Function Menu
Push Back key or Enter key to return at menu list.
Notes on
installing
Servo Movement
Connecting
the receiver
When large the set value, the
moving volume become big.
Effective at Steering linkage. But
Don’t improve straightness.
0S
10
t ti
ng
ng
Main Menu
Use "Jog dial" key or "+,-" keys. to choose the "ST:PUNCH" from Menu list.
et
ti
Features
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
transmitter
Usage of the
JogDial
Description
Wheel Angle
Index
advice
When use with other function please check the effect one by
one.
DRAFT
ST CURVE (Steering Curve)
Back Key
49
Enter Key
+/- Key
Reset
Put a curve in Servo movement against for steering operation.
Can set to quick curve or mild. curve.
[How to open the set-up screen.]
Features
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Main Menu
Use "Jog dial" key or "+,-" keys. to choose the "ST:CURVE" from Menu list.
Function Menu
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust
the value.
tin
et
et
ti
ng
tin
10
Description
Wheel Operation
Notes on
installing
+1
00
Connecting
the receiver
At - side (-1 to -100), react loosely at the
start, and a response becomes big later.
Servo Movement
At + side (+1 to +100), react greatly at the
start, and a response becomes loose later.
Push Back key or Enter key to return at menu list.
Change a movement angle of Servo for an
operation angle of wheel like a figure.
transmitter
JogDial
Usage of the
Adjusting the steering servo turning angle with the wheel operation.
Index
advice
When use with other function please check the effect one by one.
Adjust Steering punch (see page 50) to change initial reaction of
steering.
DRAFT
50
ST BALANCE (Steering Balance)
Back Key
Enter Key
transmitter
Usage of the
Adjusting the steering servo turning angle in the left and
JogDial
right directions independently. (Steering Balance)
+/- Key
Reset
Adjust the steering servo turning angle in the left and right directions independently when turnig
the wheel fully.
Features
[How to open the set-up screen.]
Main Menu
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Function Menu
Use "Jog dial" key or "+,-" keys. to choose the "ST:BALANCE" from Menu list.
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
Connecting
the receiver
A setting value is a reset key (+--simultaneous aggressiveness), and is
initialized to 70%.
Press "Back Key",back to function menu list screen.
Notes on
installing
Steering show up to turn left or right When push Et button
that assign steering trim
Description
advice
When adjust the steering balance
Make 0 the Trim.
Adjust sub trim to run straight at neutral position.
Index
Adjust at steering balance the each turn radius.
Adjust at steering travel the full rudder angle.
Adjust the trim when didn't run straight.
See also About Sub trim (page 23 and page 34)
DRAFT
ST TRAVEL(Steering Travel)
Back Key
51
Enter Key
+/- Key
Reset
Adjust the movement of steering servo when cut the steering wheel..
[How to open the set-up screen.]
transmitter
JogDial
Usage of the
Adjust the total movement of steering.
Features
Use "Jog dial" key or "+,-" keys. to choose the "ST:TRAVEL" from Menu list.
Initial value is 100. Maximum value is 150. Minimum value is 0.
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
Press "Enter Key" or "Back Key",back to function menu list screen.
Function Menu
Push "Enter" key. to enter setup menu. Use "Jog dial" key or "+,-" keys, to adjust the value.
Main Menu
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
Connecting
the receiver
ET4 assign initialy for steering travel. when control ET4 Indication such as the
right appears.
ET-4
function.
Description
Steering will not function, When the value of
Notes on
installing
The number displayed that is a ratio for a number set up at steering travel
steering travel are 0.
Index
advice
Use Steering balance (see page 50) to adjust Right and left individually.
do not set at excessive angle.
It will cause of damage to the servo

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:08:06 14:18:36-04:00
Create Date                     : 2003:08:06 14:18:17-04:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Page Count                      : 25

EXIF Metadata provided by EXIF.tools