Kondo Kagaku T125003 Remote Control Transmitter User Manual manual 27 51

Kondo Kagaku Co., Ltd. Remote Control Transmitter manual 27 51

Contents

manual 27 51

27Features Main MenuFunction MenuConnecting the receiver Notes on installing Description IndexBack KeyEnter KeyJogDial+/- KeyResetUsage of the transmitterIt is the menu displayed when "Enter" is pushed from the initial screen.Main menu(2)Delete the function from the menu list.CUSTOM1 and CUSTOM2 can be delete.(It is not possible to delete MASTER)Menu deletionThe cursor moves with Jogdial or the +/- key. Select the function name that needs to be deleted and push "Enter". Even if the deletion ends, it is possible to delete it continuously.Select function nameSelect the added list name.Move the cursor to either of CUSTOM1 or CUSTOM2 with Jogdial or +/- key and push "Enter"Select list nameDRAFT
Back KeyEnter KeyJogDial+/- KeyResetFeatures Function Menu Connecting the receiverUsage of the transmitter Notes on installing Description IndexMain Menu28MAIN MENU (3)Back KeyEnter KeyJogDial+/- KeyResetMain MenuDRAFT
29Features Main MenuFunction MenuConnecting the receiver Notes on installing Description IndexBack KeyEnter KeyJogDial+/- KeyResetUsage of the transmitterIt is the menu displayed when "Enter" is pushed from the initial screen.MAIN MENU (4)Adjusting the contrast to a very light setting in a high temperature room may cause characters to become invisible at low temperatures out doors. please be careful.BUZZER TONESYS: System default toneCS1: Custom Tone 1CS2: Custom Tone 2CS3: Custom Tone 3CS4: Custom Tone 4CS5: Custom Tone 5CS6: Custom Tone 6UP.TLAP.T DOWN.T POWERBATTERY STARTUPUP TimerLap TimerDown TimerPower Alarm Battery AlarmStartupUp TimerLap TimerDown TimerPower AlarmBattery AlarmStartup A buzzer sound sounds in various Sheen, but it is setting about that buzzer soundCan edit or create the tone.Adjust An interval of a buzzer. An interval of normal beep sound changes. Push "Enter" key at each item, cursor will change fromafter change cursor use Jogdial or +,- keys to change the setup.ALARM BUZZERJog Dial or +,- keys to adjust the interval of the buzzer.CUSTOM TONEALARM BUZZERBUZZER TONEBUZZER Setting about the buzzer sound which a system sounds. Three setting about a buzzer.Use "Jog dial" key or "+,-" keys. to adjust contrast of LCD display.can adjust contrast at 8 stages.CONTRAST (LCD Contrast) Adjust contrast of LCD display.DRAFT
Back KeyEnter KeyJogDial+/- KeyResetFeatures Function Menu Connecting the receiverUsage of the transmitter Notes on installing Description IndexMain Menu30Custom tone editorMAIN MENU (5)Back to select numberChange data pointing cursorReturn to Select numberReturn to Select numberReturn to Select numberThe upper part is an interval.The lower part is length of a sound.Display the position of sounds now.LCD indicationNoteIn LCD indication. Length of each note is fixed. Tempo become IntervalLength of a soundThe input exampleLCD indication(Point) means Long silence (a rest).Name of musical pitch=120Move the cursor to the custom(1 to 6), using Jog Dial or "+,-" keys.In this example there is no data yet.Use Jog dial or "+,-" keys to choice the sounds. and push Enter key. (A to Z.see down for details)Cursor move to the next row to choice the lenght of the sounds. (1 to 8)When push Enter key, cursor will move to next line. Push reset key (push + and - keys Together) to clear the data after the cursor.A real interval and relation with indication seem to become follows.DRAFT
31Features Main MenuFunction MenuConnecting the receiver Notes on installing Description IndexBack KeyEnter KeyJogDial+/- KeyResetUsage of the transmitterThis is the menu displayed when "Enter" is pushed from the initial screen.MAIN MENU (6)Setting will change when you pushed Enter key or Back key.Change SettingSetting of backlight doesn't turn on even "Auto". besides a Function Key, ET lever, BT button.Set the lighting method of the backlight.Can choose from "AUTO" and "OFF".BACK LIGHTAUTO: lighting the display When key function was done. or, when "auto display" are active.When didn't operate any key, the light will be off. (around 3 sec.)(Factory default is AUTO.)OFF: Back lights are always off.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index32Back KeyEnter KeyJogDial+/- KeyResetFunction MenuMODEL SELECTIt is cause of out of control when Changing Model memory while running.Model memory 0(Zero) Use Model select function to change to other Model memory (Data in Model memory 0 will lost) Copy the Setup of MEMORY 0 to other memory by MODEL COPY (page 53)adviceSetup at Function menu. that can save at MODEL MEMORYCan not set per Model memory the setup at main menu (see page 26).Model 0 will display when do this control as follow.Do following procedure to back to Ordinarily MODEL MEMORY. don't come back unless this operation is doneModel memory 0 use for avoid Lost the dataWhen remove the DATA PACK while using MODEL MEMORY of DATA PACKModel memory 0 use for avoid Lost the dataWhen model memory in data pack was used, and it was switched off, and data pack was pulled, and it was switched onBack KeyEnter KeyJogDial+/- KeyResetCan put a name at Model memory (max 10 character) Memory of unit display at 1 to 9. A to P for Data Pack.It is usable to assign each car the each number.Even same car, can change the Setting every course.Back to function menu with out any changes when push BACK key.Push Enter at the MODEL number to select.In MODEL SELECT Screen. Control Jog dial or +,- keys to move the cursor at left side Use Jog dial or "+,-" keys to select MODEL SELECT at function menu. then Push "ENTER" key[How to open the screen]Can save the setting for 9 carSelect model memory
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index33Back KeyEnter KeyJogDial+/- KeyResetFunction MenuConfirm Position of ET rever.ET POSITIONAUTO DISPLAYDIRECT SETAn original screen is returned to in about 3 secondsPush BACK key to returened to original screen.adviceWhen persentage is . the function was not workingsample: Steering travel is Steerring wheel not working In this case. Can change the assigned button to other button when use SET UP function (see page 60) When control the ET. The Auto display will activate,Push BACK key to return to initial screen.AUTO DISPLAY didn't function when display the MAIN MENU (see page 26)AUTO DISPLAY didn't function when display the SET UP (see page 60) Can adjust the Steering balance to Push ET that assigned Steering trim then control the steering to right or left. it's call Direct set.ET1 : Display Steering Trim.If a function is assigned to an ET lever, control contents of a controlled lever are displayed automatically.When the lever which a function is assigned to is controlled, contents are displayed automatically.At ET POSITION they displaed function name assigned and the value of each setup.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.Select ET POSITION then push ENTER.[How to open the screen]Can confi rm the function name and value of setupCan not adjust the setup from this function.[Sample]ET4 : Steering Travel.
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index34Back KeyEnter KeyJogDial+/- KeyResetFunction MenuAdjust the steering and throttlecan not put to the center point of neutral position of servo, when only using the linkage of car.[How to open the set-up screen.]SUB TRIM SubTrimTrim(Center Trim)advice When getting bigger the value of sub trim please adjust the linkage and make it smaller the value of sub trim.See page 23 for more detailsBack KeyEnter KeyJogDial+/- KeyResetFunction MenuWhat is sub trimUsually set the neutral of servo when put at car the servo, then adjust linkage. Use Sub trim to fine adjustmentDifferent of trim and sub trimSub trim are not only the center point of servo, it is changed also the movement angle.Push Back key to return to Initial screen.Push Enter or Back key to done the setup.The cursor will change from to . Adjust the value using by Jog dial or +,- keys.Push + and - keys together to reset the value to .Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index35Back KeyEnter KeyJogDial+/- KeyResetFunction MenuABS IndicatorPumping brake will activate, when use brake at throttle.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.A.B.S (Active Brake controll System) 1ABS indicator get blink. when ABS are active.Can adjust the 5 parameter in ABS function.Full brake are depend on to throttle brake (see Page 41).Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list.[How to open the set-up screen.]Foil locks it with brakes and is effective when posture of a car collapses.As a result, a corner ring gets possible to be done smoothly.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index36Back KeyEnter KeyJogDial+/- KeyResetFunction MenuSet pumping ABS movement will change at Control volume of throttle trigger and position of width. Base at Position of throttle triger. when width are 100. the servo move back to position to set, The servo didn' move back to point to set when make small the value of width. The movement of servo getting bigger, when the value at position setup are small. BS doesn't function When set 0 to width, and then set position to 100.A.B.S (Active Brake controll System) 2Back KeyEnter KeyJogDial+/- KeyResetABS width and positionABS CycleABS DelayABS Dutyadvice It will be easy to understand when servo connected instead of ESC at throttle channel. ABS function. it is depend at specification of servo.CycleNeutralBrake MaxNeutralBrake MaxOperatingTriggerServomovementOperatingTriggerServomovementTimeTimeWidthBrakingPos (beginning) BAA : B=DutyNSettingABS.WIDTH ABS.POS 5030Set cycle of pumping action.When make large the value. the servo move fast and cycle become short.Set delay of ABS Action.Make strong the brake when put the delay at this functionSet ratio of time to brake and time to release the brake with 7 stages.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index37Back KeyEnter KeyJogDial+/- KeyResetFunction MenuReaction velocity of a throttle is made late.TH SPEED (Throttle speed) 1Initial screen Function menu TH SPEEDSetup of SPEED and POSITION will change on setup of MODE.In 1 WAY. can not select POSITION.Indication of TH.POS changes by a position of triggerIndication of TH.POS changes by a position of triggerIt to slow the changes of signal, to make easy to controll the car.[How to open the set-up screen.]DRAFTDRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index38Back KeyEnter KeyJogDial+/- KeyResetFunction MenuWhen control the throttle quickly, the car might be out of control.Use this function to limit the throttle speed.TH SPEED (Throttle speed) 2Throttle speedMODEPOSITIONSPEEDThrottle Speed Indicatoradvice As same as Engine car, This function are functioning also at The Electric car that using ESC.Back KeyEnter KeyJogDial+/- KeyReset When controll trigger position will appear If throttle trigger are active the throttle indicator will blink Can set at ET the speed of each aria (see page 60) The value can set at ET are when set TH:SPEED at 100% Can assign ON/OFF function at ET or BT button. Even the value are not effective the light will be blinking when ON the function. A setting item changes by setting valueNormally 100 is the Setting value. when make it smaller the value reaction of servo getting smaller too.The value of Position 1 are always same or smaller then position 2.1 WAY: Use full area for the throttle trigger control2 WAY: Divide to 2 areas the throttle trigger control3 WAY: Divide to 3 areas the throttle trigger controlThis function will effect when pull the trigger. It is not effective for Brake control.In this function can set Speed, Position, Mode.The Speed and Position setup will depend at mode setup.Choose from 1 to 3 WAYSet the divition of areaSet each speed of each areaDRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index39Back KeyEnter KeyJogDial+/- KeyResetFunction MenuTo adjust only an initial reaction of throttle.When move the throttle to forward or to brakes. can skip the first field.[How to open the set-up screen.]TH PUNCH (Throttle punch)adviceThis function are useful to avoid time-lag of clutch meet at Engine car.Can adjust starting point of brakes of engine car.Can put the initial punch to Forward and backing of ESC, in electric car.When Push "Enter" at each Item . the cursor change to .0Setting100 Setting50 SettingServo MovementTriger operationNeutral Half Full ThrottleSetting value of throttle punch is in proportion to initial movement. but when use combination of other setting, the throttle will move like a switches between two points.When using combination with ABS function, please check the movement carefully before use.This function are useful to avoid time-lag of clutch meet at Engine car.Can put the initial punch to Forward and backing of ESC, in electric car.Push "Enter" key. the cursor return to . When push Back Key after that the display will return to menu list.Use Jog Dial or +,- keys to choice F(forward) or B(Brakes). then push "Enter" to cursor change from to . and can adjust the value using Jog dial or +,- keys.To reset. When cursor display , push +,- keys toghter.Use "Jog dial" key or "+,-" keys. to choose the "TH:PUNCH" from Menu list. and then push "Enter" key.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index40Back KeyEnter KeyJogDial+/- KeyResetFunction MenuPut the curve on actual servo operation to the trigger operation of the throttle.TH CURVE (Thorottle curve)adviceWhen other functions are used together, please set up while confirming movement. Only the curve can adjust at this function. to adjust throttle punch (Page 39) to be make bigger the initial movement .Setting value : + makes quick - makes mild.Quick curve : sensitive at initial responseMild curve : insensitive at initial responseServo MovementQuick+100 SettingMildTrigger operationNeutral Half Full ThrottleBack KeyEnter KeyJogDial+/- KeyReset When push Enter key at F(Forward) or B(Brakes), cursor change to . then can adjust the value using by Jog dial or +,- keys.Push Enter key to start setup the Thorottle curve.Use "Jog dial" key or "+,-" keys. to choose the "TH:CURVE" from Menu list. and then push "Enter" key.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]In throttle operation, can be made quick or mild by hanging a curve to a signal. Besides, can brakes made quick or mild by hanging a curve.Function MenuDRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index41Back KeyEnter KeyJogDial+/- KeyResetFunction MenuAdjust only the brake of throttle.Adjust only the brake of throttle. maximum brake will change.TH BRAKE (Throttle Brake)To Adjust the movement of servo, of the time that push the trigger. When make large the value at Engine car, a burden of Servo to increase. please check the movement while adjust the value.In Electric car, When set value is too small the amplifier can not show better performance. Please start from 100 (factory setting) the setup. This function can be assigned and adjusted to ET lever. but It becomes a relative value over the value set up on this screen. (It is assigned to ET-3 at the time of factory shipments.) Keep in mind that a brake does not work even if it enlarges a numerical value, when a setup is 0. When assigning ET lever, the contents of operation are automatically displayed only by operating a lever. (AUTO Display) and Keep in mind that a brake does not work even if it enlarges the numerical value of this function, when a setup with ET lever is 0%.adviceCan change the assigned button (ET-3) to other button when use SET UP function (see page 60)Minimum value are 0, but doesn't operate to braking.Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys, to adjust the value..Use "Jog dial" key or "+,-" keys. to choose the "TH:BRAKE" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index42Back KeyEnter KeyJogDial+/- KeyResetFunction MenuSet only the value of forward movement, on the throttle.TH HIPOINT (Throttle high points)To Adjust the movement of servo, of the time that pull the triggerSet only the value of forward movement on the throttle. It is easy to set up especialy on Engine car. When make large the value at Engine car, a burden of Servo to increase. please check the movement while adjust the value. In Electric car, When set value is too small the amplifier can not show better performance. Please start from 100 (factory setting) the setup.Minimum value are 0, but doesn't operate to forward.advice Throttle trim is a center trim.When made small the value of "TH HIPOINT".and then, when set large value to an advance direction of the trim.the amount of operation extremely will be small.(Please see page 23 about Center trim)Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "TH:HIPOINT" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open set-up screen]Set only the value of forward movement on the throttle. use this function. Electric car use Highest point of ESC. Engine car use "High" DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index43Back KeyEnter KeyJogDial+/- KeyResetFunction MenuMove the throttle servo to set point, using by ET or BT button.TH PRESET (Throttle Preset)The range can setup 0 to F150 and 0 to B150 Other function for the throttle are not affected by this function. (If set at F100 when control ET or BT button, the throttle will move to the set point, even TH:HIPOINT are 0.)It is useful for Engine cut, Idling up, Full brake, Move BackwardTrigger will not function and throttle is fixing at point while controlled the ET or BT button that assigned as preset.Please check the movement before use, to avoid lost control.use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list.Use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]Use this function to set at ET or BT button.Can move at point you set when control the button assigned.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index44Back KeyEnter KeyJogDial+/- KeyResetFunction MenuTH ACCEL (Throttle Acceleration) 1Push enter at each item to change the cursorCycleMaximumNeutralMaximumNeutralOperatingTriggerOperatingTriggerServomovementServomovement Pull the trigerTimeTimePosLPosHWidthIf you set this fanction that POS L 10 POS H 80 the effect shownPush "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "TH:ACCEL" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]Set a awing at forward part of throttle.The expert driver using Delicate throttle work.In this function do automatically to make faster the cornering of the carThrottle Accelaration IndicatorAccelaration are off When WIDTH set at 0.Accelaration are off when POS.LOW and POS.HIGH are sameIndicator will blinking when on the throttle accelaration.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index45Back KeyEnter KeyJogDial+/- KeyResetFunction MenuTH ACCEL (Throttle Acceleration) 2Setting ItemRange of setting valueWhen set large value at set up, increase Consumption electric currents, It will cause of damage to servo.adviceTo use ET or BT with other function. Modified at "SET UP" function (page 60). An Ideal setup isn't know till actual run. because it will change in various factors (Servo, Car, road surface, etc.) Start swing action, When throttle trigger was position between POS.LOW and POS.HIGH.Set the swing width at WIDTH. This function can adjust during running, when assign it to ET (from ET1 to ET5) the "WIDTH" (set the "WIDTH" to 100)"CYCLE" can adjust during running the cycle of swing action When assign this function to ET (From ET1 to ET5)Can assign to the BT1 or BT2, on/off of functions. When activate on/off at BT button, then even if the setting are not effective (ex. "WIDTH" is 0), The Throttle Acceleration Indicator be flashing.WIDTH(Width) Set the swing widthPOS.LOW(Low Position) Set the lower part of throttle trigger for swing action POS.HIGH(High Position) Set the upper part of throttle trigger for swing actionCYCLE(Cycle) Set the cycele of swing actionSetting Item Maximum Minimum Initial valueACCEL.WIDTH 100 0 0ACCEL POS.LOW 100 0 5 (Can not set higher value than POS.HIGH)ACCEL POS,HIGH 100 0 50 (Can not set lower value than POS.LOW)ACCEL CYCLE 100 1 97DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index46Back KeyEnter KeyJogDial+/- KeyResetFunction MenuIt can be chosen between 1 way and 2 way.Displayed contents at "SPEED" and "POSITION" are change by setting value of MODE.Can not set "POSITION" at 1 WAY mode.Use Steering to move to TURN2.Can change the value, where cursor are pointing.Use Steering to move to RETURN2.TURN1 at bottom row, By steering can change to TURN2.RETURN1 at bottom row, By steering can change to RETURN2Make late the Speed of steering Servo.ST SPEED (Steering speed) 1Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "ST:SPEED" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]Limit the Max speed of Steering servo. Can set separately the Turn and Return.Divide between center of neutral and maximum rudder angle. It is possible to set each angle. (2 WAY)DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index47Back KeyEnter KeyJogDial+/- KeyResetFunction MenuNeutral NeutralThe changing point can be adjustedThe speed range of Turn1The speed range of Turn2The changing point can be adjustedThe speed range of Return1The speed range of Return2End EndTimeTimeMaximumMaximumOperatingWheelOperatingWheelNeutralNeutralTurning ReturningServomovementServomovementSpeedSpeedchangingpointSetting1WAY 1 WAY: become same speed in whole area. Can set each TURN and RETURN speed. In 1way, displayed POSITION but isn't functioning. (Can't be chosen)2WAY To set the position can assign by two areas.ST SPEED (Steering Speed) 2Display contents at "1 way" and "2 way" are different by setting item of MODE.adviceIt is totally different about result of this function by speed spec of servo. An Ideal setup isn't know till actual run. because it will change in various factors (Servo, Car, road surface, etc.)DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index48Back KeyEnter KeyJogDial+/- KeyResetFunction Menu ST PUNCH (Steering Punch)Servo MovementWheel Angle0Setting100 Settingadvice When use with other function please check the effect one by one.Push Back key or Enter key to return at menu list.Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.To reset the value Push together "+,-" keys.Use "Jog dial" key or "+,-" keys. to choose the "ST:PUNCH" from Menu list. From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.] When large the set value, the moving volume become big. Effective at Steering linkage. But Don’t improve straightness.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index49Back KeyEnter KeyJogDial+/- KeyResetFunction MenuAdjusting the steering servo turning angle with the wheel operation.ST CURVE (Steering Curve)Servo Movement-100Setting+100Setting0 SettingWheel Operationadvice When use with other function please check the effect one by one. Adjust Steering punch (see page 50) to change initial reaction of steering.Change a movement angle of Servo for an operation angle of wheel like a fi gure.At + side (+1 to +100), react greatly at the start, and a response becomes loose later.At - side (-1 to -100), react loosely at the start, and a response becomes big later.Push Back key or Enter key to return at menu list.Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "ST:CURVE" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]Put a curve in Servo movement against for steering operation.Can set to quick curve or mild. curve.DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index50Back KeyEnter KeyJogDial+/- KeyResetFunction MenuAdjusting the steering servo turning angle in the left and right directions independently. (Steering Balance) ST BALANCE (Steering Balance)advice When adjust the steering balanceSteering show up to turn left or right When push Et button that assign steering trimPress "Back Key",back to function menu list screen.A setting value is a reset key (+--simultaneous aggressiveness), and is initialized to 70%.Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Use "Jog dial" key or "+,-" keys. to choose the "ST:BALANCE" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.[How to open the set-up screen.]See also About Sub trim (page 23 and page 34)Adjust the trim when didn't run straight.Adjust at steering travel the full rudder angle.Adjust at steering balance the each turn radius. Adjust sub trim to run straight at neutral position.Make 0 the Trim.Adjust the steering servo turning angle in the left and right directions independently when turnig the wheel fully. DRAFT
Usage of the transmitter Features Main Menu Connecting the receiver Notes on installing Description Index51Back KeyEnter KeyJogDial+/- KeyResetFunction MenuAdjust the total movement of steering.ST TRAVEL(Steering Travel)ET-4adviceUse Steering balance (see page 50) to adjust Right and left individually.do not set at excessive angle.It will cause of damage to the servoSteering will not function, When the value of steering travel are 0.Press "Enter Key" or "Back Key",back to function menu list screen.Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.Push "Enter" key. to enter setup menu. Use "Jog dial" key or "+,-" keys, to adjust the value. Initial value is 100. Maximum value is 150. Minimum value is 0.Use "Jog dial" key or "+,-" keys. to choose the "ST:TRAVEL" from Menu list.From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. ET4 assign initialy for steering travel. when control ET4 Indication such as the right appears. The number displayed that is a ratio for a number set up at steering travel function.[How to open the set-up screen.]Adjust the movement of steering servo when cut the steering wheel..

Navigation menu