Contents
User Manual Notices
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2263145 |
| Application ID | t5UOvVgDjKjaFVV8ZTmzKA== |
| Document Description | User Manual Notices |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 40.65kB (508176 bits) |
| Date Submitted | 2014-05-10 00:00:00 |
| Date Available | 2014-11-05 00:00:00 |
| Creation Date | 2014-04-25 08:16:23 |
| Producing Software | iTextSharp™ 5.4.5 ©2000-2013 1T3XT BVBA (AGPL-version) |
| Document Lastmod | 2014-04-28 17:10:15 |
| Document Title | User Manual Notices |
| Document Creator | Pdf_as |
FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help and for additional suggestions. Warning The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. 付録／索引 250 FCC RF EXPOSURE INFORMATION Warning! Read this information before using your phone. Warning! Read this information before using your phone. In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 0.39 inches (1.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.39 inches (1.0 cm) must be maintained between the user's body and the back of the phone, including the antenna. All beltclips, holsters and similar accessories used by this device must not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure limits and should be avoided. Turn off your phone before flying You should turn off your phone when boarding any aircraft. To prevent possible interference with aircraft systems, U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air. European RF Exposure Information Your mobile device is both a radio transmitter and receiver, and is designed not to exceed limits for exposure to radio waves recommended by international guidelines. These guidelines were produced by independent scientific organization, ICNIRP, and include safety margins designed to protect all persons, regardless of age and condition of health. The guidelines apply a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit for mobile devices is 2W/kg, and the highest SAR value for this device was 0.543 W/kg*. As testing measures SAR at the highest transmitting power of a device, actual SAR tends to be lower during ordinary operation. Lower SAR levels are typical during ordinary operation as automatic changes are made within the device to ensure the network can be reached with minimal power. The World Health Organization (WHO) has stated that present scientific information does not indicate the need for any special precautions to be adopted when using mobile devices. WHO also notes that those wishing to reduce exposure may do so by limiting call length and by using a‘hands-free’device to distance the phone from the head and body. For further information, please see the WHO website: http://www.who.int/peh-emf/en/ * Note that tests are also carried out in accordance with international testing guidelines. Declaration of Conformity Product is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1 (a), 3.1 (b) and 3.2. The Declaration of Conformity can be found on http://www.kyocera.co.jp/prdct/ telecom/consumer/ (Japanese only). -NoteBelow frequency bands are restricted for indoor use only. 5150 - 5250MHz(802.11a/n/ac) in US 5150 - 5350MHz(802.11a/n/ac) in EU Safety Information To prevent possible hearing damage, do not listen at high volume levels for long periods. 付録／索引 251
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 2 XMP Toolkit : 3.1-701 Producer : iTextSharp™ 5.4.5 ©2000-2013 1T3XT BVBA (AGPL-version) Creator Tool : Pdf_as Create Date : 2014:04:25 08:16:23+09:00 Modify Date : 2014:04:28 17:10:15+09:00 Creator : Pdf_asEXIF Metadata provided by EXIF.tools