LG Electronics USA 50PM4MAWA PLASMA MONITOR User Manual MFL36274107 en rev04
LG Electronics USA PLASMA MONITOR MFL36274107 en rev04
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 924227 |
| Application ID | 1pEK6RHWbw8E9C0ka8lrMA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 89.2kB (1115038 bits) |
| Date Submitted | 2008-04-07 00:00:00 |
| Date Available | 2008-04-07 00:00:00 |
| Creation Date | 1904-01-20 22:04:28 |
| Producing Software | Acrobat Distiller 3.0 for Power Macintosh |
| Document Lastmod | 2008-04-07 14:30:49 |
| Document Title | MFL36274107_en_rev04 |
| Document Creator | QuarkXPress3.32: LaserWriter 8 Z1-8.7.1 |
| Document Author: | SKJ |
PLASMA
MONITOR
MODELS: 42PM4M / 42PM4MA
50PM4M / 50PM4MA
60PM4M / 60PM4MA
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
P/NO: MFL36274107 (0803-REV04)
Printed in Korea
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product
Safety Instructions
Safety Instructions
WARNING
Do not place the set in direct sunlight or near heat sources such as electric or gas heaters, a stove and so on.
- This may cause a fire.
Do not use the set in a damp place such as a bathroom or any place where it is likely to get wet.
- This may cause a fire or could give you an electric shock.
Bend the antenna cable between the inside and the outside of the building to prevent rain from flowing in.
- This may cause water damaged inside the set and could give you an electric shock.
Earth wire should be connected.
- If the earth wire is not connected, there is possibility of electric shock caused by the leakage current.
- If grounding methods are not possible, a separate circuit breaker should be employed and installed by a qualified electrician.
- Do not connect ground to telephone wires, lightning rods or a gas pipe.
Do not place anything containing liquid on top of the set.
- This may cause a fire or could give an electric shock.
Do not insert any object into the air exhaust vents.
- This may cause a fire or could give you an electric shock.
Do not place heavy objects on the set.
- This may cause serious injury to a child or adult.
Do not use water while cleaning the set.
- This may cause damage to the set or could give an electric shock.
In case of smoke or a strange smell from the set, switch it off ,unplug it from the wall outlet and contact your dealer or service centre.
- This may cause a fire or could give you an electric shock.
Do not attempt to service the set yourself. Contact your dealer or service centre.
- This may cause damage to the set or could give you an electric shock.
During a lightning or thunder storm, unplug the set from the wall outlet and don’t touch the antenna cable.
- This may cause damage to the set or could give you an electric shock.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2 Plasma Monitor
Safety Instructions
ENGLISH
* Safety instructions have two kinds of information, and each meaning of it is as below.
WARNING The violation of this instruction may cause serious injuries and even death.
NOTES
The violation of this instruction may cause light injuries or damage of the
product.
Take care of danger that may happen under specific condition.
NOTES
Never touch the power plug with a wet hand.
- This may cause an electric shock.
Disconnect the unit from the mains power and remove all connections before moving the unit.
Do not place the set in a built-in installation such as a bookcase or rack.
- Ventilation is required for the unit.
When installing the set on a table, be careful not to place the edge of its stand.
- This may cause the set to fall, causing serious injury to a child or adult, and serious damage to the set.
Do not place an outside antenna in the vicinity of overhead power lines or other electric light or power circuits.
- This may cause an electric shock.
There should be enough distance between an outside antenna and power lines to keep the former from touching the
latter even when the antenna falls.
- This may cause an electric shock.
Do not pull the cord but the plug when unplugging.
- This may cause a fire.
Ensure the power cord doesn’t trail across any hot objects like a heater.
- This may cause a fire or an electric shock.
Do not plug when the power cord or the plug is damaged or the connecting part of the power outlet is loose.
- This may cause a fire or an electric shock.
Dispose of used batteries carefully to protect a child from eating them.
- In case that someone eats them, take the person to see a doctor immediately..
When moving the set assembled with speakers do not carry holding the speakers.
- This may cause the set to fall, causing serious injury to a child or adult, and serious damage to the monitor.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
- This may cause damage to the set or could give an electric shock.
Contact the service center once a year to clean the internal part of the set.
- Accumulated dust can cause mechanical failure.
The distance between eyes and the screen should be about 5 ~ 7 times as long as diagonal length of the screen.
- If not, you may strain your eyes.
Unplug the set from the wall outlet when it is left unattended and unused for long periods of time.
- Accumulated dust may cause a fire or an electric shock from
deterioration or electric leakage.
Owner’s Manual 3
Safety Instructions
Safety Instructions continued
CAUTION concerning the Power Cord :
- Most appliances recommend they be connected to a dedicated circuit; that is,
a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits.
- This may cause a fire or an electric shock.
- Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords,
or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre.
- Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
- Use a dedicated power cord. Do not modify or extend the power cord.
- Do not install, remove, or reinstall the unit by yourself (customer).
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. For installation, always
contact the dealer or an Authorized Service Center.
- Do not use if the power cord or plug is damaged, or socket is loose. Use a dedicated outlet for this appliance.
- Do not over bend the power cord and do not place anything on the power cord. Do not install the monitor near any sharp
edge to avoid wire damage.
Outdoor Use Marking :
- WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.
Wet Location Marking :
- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
4 Plasma Monitor
Contents
ENGLISH
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2~4
Introduction
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Controls and Connection Options . . . . . . . . . .8~9
Remote Control Key Functions . . . . . . . . . . . . .10
Installation
Installation Instructions . . . . . . . . . . . . . . . . . . . . .11
External Equipment Connections . . . . . . . . . .12~16
When Connecting to your PC . . . . . . . . . . .12~13
Watching RGB Outputs . . . . . . . . . . . . . . . . . . .13
When watching VCR / DVD . . . . . . . . . . . . . . .14
When watching HDTV/DVD(480p/576p/
720p/1080i/480i/576i) . . . . . . . . . . . . . . . . . . .15
When watching HDMI/DVI/RGB
from the VCR/DVD/Set-top Box
(480p/576p/720p/1080i) . . . . . . . . . . . . . . . . . .15
Watching AV Outputs . . . . . . . . . . . . . . . . . . . .16
Operation
Special Menu Options
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ISM (Image Sticking Minimization) Method . . . .25
Tile mode . . . . . . . . . . . . . . . . . . . . . . . . . .26~27
Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
XD DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Screen Menu Options
Auto Configure . . . . . . . . . . . . . . . . . . . . . .
Manual Configure . . . . . . . . . . . . . . . . . . . .
Selecting XGA mode . . . . . . . . . . . . . . . . . .
Setting the Picture Format . . . . . . . . . . . . .
Initializing (Reset to original factory settings)
. . .29
. . .29
. . .30
. . .30
. . .31
External Control Device Setup . . . . . . . . . . . . .32~37
IR Code
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38~39
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . .40
Product Specifications . . . . . . . . . . . . . . . . . . . . . . .41
Turning on the Monitor . . . . . . . . . . . . . . . . . . . . .17
Menu Language Selection . . . . . . . . . . . . . . . . . .17
Picture Menu Options
PSM (Picture Status Memory) . . . . . . . . . . . . . .18
Manual Picture Control (user option) . . . . . . . . .18
CSM (Colour Status Memory) . . . . . . . . . . . . . .18
Manual Colour Temperature Control . . . . . . . . .19
XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Advanced - Cinema . . . . . . . . . . . . . . . . . . . . .20
Advanced - Black level . . . . . . . . . . . . . . . . . . .20
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Sound Menu Options
SSM . . . . . . . . . . . . . . . . .
AVL (Auto Volume Leveler)
Balance . . . . . . . . . . . . . .
Speaker . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .21
. . . . . . . . . . . . . . . .21
. . . . . . . . . . . . . . . .22
. . . . . . . . . . . . . . . .22
Timer Menu Options
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .23
On/Off Time Setup . . . . . . . . . . . . . . . . . . . . . .23
Auto sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
After reading this manual, keep it handy for future reference.
Owner’s Manual 5
Introduction
Introduction
What is a Plasma Display Panel?
If voltage is applied to a gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that
instant, light is emitted. A Plasma Display is the a next generation flat Display using this phenomenon.
160° - Wide angle range of vision
Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is
clear and visible to viewers anywhere in the room.
Wide Screen
The screen of the Plasma Display is 42",50" or 60" so wide that your viewing experience is as if you are in a movie theater.
Versatile
The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs would
not fit.
The Plasma Monitor Manufacturing Process: Why minute colored dots may be present on the Plasma
Monitor screen
The Plasma Display Panel which is the display device of this product is composed of 0.9 to 2.2 million cells. A few cell defects will
normally occur in the Plasma Monitor manufacturing process. Several minute colored dots visible on the screen should be acceptable. This also occurs in other Plasma Monitor manufacturers' products and the tiny dots appearing does not mean that this
Plasma Monitor is defective. Thus a few cell defects are not sufficient cause for the Plasma Monitor to be exchanged or returned.
Our production technology is designed to minimize cell defects during the manufacture and operation of this product.
Cooling Fan Noise
In the same way that a fan is used in a PC computer to keep the CPU (Central Processing Unit) cool, the Plasma Monitor is
equipped with cooling fans to cool the Monitor and improve its reliability. Therefore, a certain level of noise could occur while the
fans are operating and cooling the Plasma Monitor.
The fan noise doesn't have any negative effect on the Plasma Monitor's efficiency or reliability. The noise from these fans is normal during the operation of this product. We hope you understand that a certain level of noise from the cooling fans is acceptable
and is not sufficient cause for the Plasma Monitor to be exchanged or returned.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
6 Plasma Monitor
Introduction
ENGLISH
Accessories
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
AV
SLEEP
POWER
PSM
ARC
INPUT
AUTO
MENU
EXIT
SET
MUTE
1.5V
1.5V
Owner’s Manual
Batteries
Remote Control
Power Cord
Option Extras
Optional extras can be changed or modified for quality improvement without any notification new optional extras can be added.
Contract your dealer for buying these items.
Desktop stand
speaker
Tilt wall mounting bracket
Video cables
Audio cables
M.P.I.
CABLE OUT
AC IN
AC OUT
DISPLAY CONTROL
AUX
CONTROL
ANTENNA
CABLE
D-BOX
Owner’s Manual 7
Introduction
Controls
- Here shown may be somewhat different from your set.
Front Panel Controls
1. Power Indicator
Illuminates red in standby mode, Illuminates green when the
Set is turned on.
4. VOLUME (E,
D)
Buttons
5. MENU Button
2. Remote Control Sensor
6. INPUT SELECT Button
3.
7. Main Power Button
Switches the set on from standby or off to standby.
, G Buttons
60PM4M
INPUT
SELECT
VOLUME
Remote Control Sensor
VOLUME (F,G) Buttons
Power Standby Indicator
Illuminates red in standby mode,
Illuminates green when the
Monitor is turned on
INPUT SELECT Button
Sub power button
INPUT
SELECT
8 Plasma Monitor
VOLUME
Introduction
ENGLISH
Connection Options
- Here shown may be somewhat different from your set.
Back Connection Panel
AC IN
REMOTE
CONTROL IN
RS-232C
(CONTROL&SERVICE)
HDMI/DVI IN
AUDIO
(RGB/DVI)
RGB
COMPONENT IN
VIDEO
OUT
IN
IN
OUT
L-AUDIO-R
1. REMOTE CONTROL IN
2. RS-232C INPUT(CONTROL&SERVICE) PORT
OUT
For control the another set, connect a RS-232C Cable from
RS-232C out port to another set’s RS-232C input port.
IN
Connect to the RS-232C port on a PC.
3. HDMI/DVI IN
Connect a HDMI signal to this jack. Or connect a DVI(Video)
signal.
4. RGB INPUT
Connect the set output connector from a PC to the
appropriate input port.
RGB OUTPUT
You can watch the RGB signal on another set, connect RGB
OUTPUT to another set’s PC input port.
AV IN
EXTERNAL SPEAKER
L-AUDIO-R
VIDEO
S-VIDEO
AV
OUT
7. AV IN
Connect audio/video output from an external device to these
jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
AV OUT
Connect a AV Cable from AV(CVBS) out port to another
set's AV input port.
8. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to ‘Speaker & Speaker
Stand’ manual.
9. POWER CORD SOCKET
This set operates on an AC power. The voltage is indicated on
the Specifications page. Never attempt to operate the set on
DC power.
5. AUDIO (RGB/DVI)
Connect a PC Phone Cable.
6. COMPONENT INPUT 1-2
Connect a component video/audio device to these jacks.
Owner’s Manual 9
Introduction
Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the monitor.
- Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press
the key again as necessary.
AV buttons
Each time you press the lnput button it will change to
AV
Component1
Component2
RGB
HDMI/DVI.
AV
SLEEP
SLEEP
Sets the sleep timer.
PSM
Adjusts the factory preset picture
according to the room.
NUMBER buttons
POWER
PSM
ARC
POWER
switches the set on from standby or off to
standby.
INPUT
AUTO
AUTO
Automatic adjustment function.
(Operational for the analog signal only)
ARC
Changes the picture format.
There is not a function which is supported.
There is not a function which is supported.
MENU
MENU
Displays on screen menus one by
one.
Exits the current menu.
Memorizes menu changes.
EXIT
EXIT
Clears all on-screen displays and returns
to monitor viewing from any menu.
SET
MUTE
INPUT
Selects the AV, Component, RGB or
HDMI/DVI modes.
switches the set on from standby.
MUTE
Switches the sound on or off.
SET
accepts your selection or displays the
current mode.
F /G
Volume Up/Down
D /E
Adjusts menu settings.
Selects menu item.
* : No function
Installing Batteries
• Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -).
• Install two 1.5V AAA batteries. Don’t mix old or used batteries with new
ones. Replace cover.
10 Plasma Monitor
Installation
ENGLISH
Installation
Installation Instructions
• Install this monitor only in a location where adequate ventilation is available.
• If set is installed vertically, it is on the control key toward down.
GROUNDING
Power
Supply
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Wall Mount Installation
For proper ventilation, allow a clearance of 4” on each
side and 4” from the wall. Detailed installation instructions are available from your dealer, see the optional
Wall Mounting Bracket Installation and Setup Guide.
4 inches
4 inches
4 inches
4 inches
4 inches
Desktop Pedestal Installation
For proper ventilation, allow a clearance of 4” on each
side and the top and 4” from the wall. Detailed installation instructions are included in the optional Desktop
Stand Installation and Setup Guide available from your
dealer.
4 inches
4 inches
4 inches
4 inches
Owner’s Manual 11
Installation
External Equipment Connections
NOTE: Not all cables shown are included with the plasma display.
When Connecting to your PC
1. First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
a. When connecting with the D-Sub signal input cable.
RGB
IN
OUT
PC
Rear side of the product.
PC/MAC
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
b. When connecting with the HDMI to DVI signal input cable (not included).
HDMI/DVI IN
(not included)
Rear side of the product.
PC
2. Connect the Audio cable.
AUDIO
(RGB/DVI)
Rear side of the product.
3. Connect the power cord.
AC IN
12 Plasma Monitor
PC
Installation
ENGLISH
4. Turn on power by pressing the power button on the product.
Turn on the PC.
5. Select an input signal.
Press the INPUT button on the remote control to select the input
signal.
INPUT
SET
Input
a. When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
Input
AV
Component1
Component2
RGB
HDMI/DVI
b. When connecting with a HDMI to DVI signal input cable.
• Select HDMI/DVI : HDMI to DVI Digital signal.
AV
Component1
Component2
RGB
HDMI/DVI
NOTES: • How to connect to two computers.
Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
Watching RGB Outputs
Use this function when displaying ANALOG RGB inputs of a PC to the other product.
• To use different products connected to each other Connect one end of the signal input cable(15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.
15-pin D-Sub Signal Cable
RGB
RGB
RGB
RGB
IN
IN
IN
IN
OUT
OUT
OUT
OUT
PC
Product 1
Product 2
Product 3
Product 4
NOTES: • When multi-connecting in/out cascade format, cables to be less damaged are recommended.
We recommend that you should use cable distributor.
Owner’s Manual 13
Installation
When watching VCR / DVD
1. Connect the video cable as shown in the below figure and then connect the power cord.
a. When connecting with a BNC cable.
• Connect the input terminal with a proper colour match.
b. When connecting with a S-Video cable.
• Connect to the S-Video input terminal to watch high
image quality movies.
Product
Product
AV IN
AV IN
L-AUDIO-R
VIDEO
L-AUDIO-R
VIDEO
S-VIDEO
S-VIDEO
AV
OUT
AV
OUT
Audio Cable
(not included)
BNC Cable
(not included)
Audio Cable
(not included)
VCR/DVD Receiver
2. Select an input signal.
Press the INPUT button on the remote control to select the input signal.
D / E
INPUT
SET
a. When connecting with an BNC cable.
• Select AV.
b. When connecting with an S-Video cable.
• Select AV.
S-Video Cable
(not included)
VCR/DVD Receiver
Input
AV
Component1
Component2
RGB
HDMI/DVI
NOTES: • When the BNC cable is connected simultaneously with S-Video cable, S-Video cable is first.
14 Plasma Monitor
Installation
ENGLISH
When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i)
1. Connect the video/audio cable as shown in the below figure and then, connect the power cord.
• Connect the input terminal with a proper colour match.
Product
a.
VIDEO
Product
b.
COMPONENT IN
COMPONENT IN
VIDEO
L-AUDIO-R
Audio Cable
(not included)
BNC Cable
(not included)
Audio Cable
(not included)
BNC Cable
(not included)
L-AUDIO-R
HDTV Receiver
HDTV Receiver
2. Select an input signal.
Press the INPUT button on the remote control to select the input signal.
D / E
INPUT
SET
Input
a. • Select Component 1
Input
AV
Component1
Component2
RGB
HDMI/DVI
b. • Select Component 2
AV
Component1
Component2
RGB
HDMI/DVI
When watching HDMI/DVI/RGB from the VCR/DVD/Set-top Box (480p/576p/720p/1080i)
1. Connect the video/audio cable as shown in the below figure and then connect the power cord.
a.
Product
HDMI/DVI IN
HDMI to
DVI Signal
Cable (not
included)
b.
Product
AUDIO
(RGB/DVI)
RGB
HDMI/DVI IN
AUDIO
(RGB/DVI)
RGB
Product
HDMI/DVI IN
AUDIO
(RGB/DVI)
RGB
IN
IN
IN
OUT
OUT
OUT
RCA-PC
Audio Cable
VCR/DVD/Set-top Box
HDMI Signal
Cable (not
included)
VCR/DVD/Set-top Box
(not included) Cable
RCA-PC
Audio
Cable
VCR/DVD/Set-top Box
2. Select an input signal.
Press the INPUT button on the remote control to select the input signal.
D / E
INPUT
SET
Input
a. When connecting with a HDMI to DVI signal input cable.
When connecting with a HDMI signal input cable.
• Select HDMI/DVI
b. When connecting with a D-Sub signal input cable.
• Select RGB
AV
Component1
Component2
RGB
HDMI/DVI
Input
AV
Component1
Component2
RGB
HDMI/DVI
Owner’s Manual 15
Installation
Watching AV Outputs
• When you set the input signal of the main screen as 'AV (CVBS)', you can transmit the signal that you're watching
to the AV output terminal.
Video/TV
BNC Cable
(not included)
Audio Cable
(not included)
AV IN
L-AUDIO-R
VIDEO
S-VIDEO
Product
AV
OUT
Audio Cable
(not included)
BNC Cable
(not included)
Video/TV
NOTES: • When multi-connecting in/out cascade format, cables to be less damaged are recommended.
We recommend that you should use cable distributor.
PC Mode – Preset Mode
Resolution
1. VGA 640 x 350
2. VGA 720 x 400
3. VGA 640 x 480
4. VESA 640 x 480
5. VESA 640 x 480
6. VESA 800 x 600
7. VESA 800 x 600
8. VESA 800 x 600
9. MAC 832 x 624
10.VESA1024 x 768
11.VESA1024 x 768
12.VESA1024 x 768
13. VESA1280 x 720
14. VESA1280 x 768
15. VESA1360 x 768
16. VESA1366 x 768
17. VESA1280 x 1024
18. VESA 1280 x 1024
19.VESA 1600 x 1200
Vertical
Horizontal
Frequency(kHz) Frequency(Hz)
31.468
31.469
31.469
37.500
43.269
37.879
46.875
53.674
49.725
48.363
60.023
68.677
44.772
47.693
47.700
47.700
63.981
79.980
75.000
70.09
70.08
59.94
75.00
85.00
60.31
75.00
85.06
74.55
60.00
75.02
85.00
59.85
59.99
60.00
60.00
60.02
75.02
60.00
NOTES: We recommend using 1360*768, 60Hz (50PM4M) for
the PC mode, they provide the best picture quality. (If the resolution of PC is over UXGA, there will be no picture on the set.)
RGB : Mode 1 ~ Mode 19
HDMI/DVI : Mode 1 ~ Mode 17
16 Plasma Monitor
DTV Mode
Signal
480i
576i
480p
576p
720p
1080i
Component 1/2
RGB
HDMI
Operation
ENGLISH
Operation
Your Monitor's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Turning on the Monitor
Turning on the Monitor just after installation
1. Connect power cord correctly. At this moment, the Monitor is switched to standby mode.
2. Press the INPUT or
button on the Monitor or press the POWER, INPUT button on the remote
control and then the Monitor will switch on.
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
2. Press the G button and then use D /
button to select the SPECIAL menu.
button to select Language.
3. Press the G button and then use D / E button to select your desired language.
From this point on, the on-screen menus will be shown in the language of your choice.
4. Press the EXIT button to save the new settings.
• Press the MENU button to return to the previous menu.
Owner’s Manual 17
Operation
Picture Menu Options
- Readjust Picture menu settings for each following input source as preferred.
PSM (Picture Status Memory)
- This function adjusts the set to the best picture appearance.
- When adjusting picture options (contrast, brightness, colour, sharpness and tint) manually, PSM is automatically
changed to User.
1. Press the PSM button
• Each press of the PSM button changes the screen display as shown below.
Dynamic
Standard
Mild
User1
User2
• You can also select Dynamic, Standard, Mild or User1/2 in the PICTURE menu.
• Picture options Dynamic, Standard and Mild are preset and programmed for good picture quality at
the factory and cannot be changed.
Manual Picture Control (user option)
- You can adjust picture contrast, brightness, colour, sharpness, and tint to the levels you prefer.
PICTURE G
PSM
PICTURE0
PSM
SOUND0
CSM
SOUND0
CSM
TIME0
Menu
Standard
Mild
TIME0
User1
SPECIAL0
Advanced
SPECIAL0
Advanced
SCREEN0
Reset
SCREEN0
Reset
Menu
Prev.
1. Press the MENU button and then use
D /E
button to select the PICTURE menu.
2. Press the
button and then use D
/E
button to select PSM.
button and then use D
/E
button to select User1 or User2.
5. Press the G button and then use
D /E
User2
Prev.
3. Press the
4. Press the G button and then use
Colour, Sharpness or Tint).
Dynamic
button to select the desired picture option (Contrast, Brightness,
F / G button
to make appropriate adjustments.
6. Press the EXIT button to save the new settings.
CSM (Colour Status Memory)
- To initialize values (reset to default settings), select the Cool option.
Menu
PICTURE G
PSM
PICTURE 0
PSM
SOUND0
CSM
SOUND0
CSM
TIME0
SPECIAL0
Advanced
SPECIAL0
Advanced
SCREEN0
Reset
SCREEN0
Reset
Prev.
Menu
1. Press the MENU button and then use
D /E
Warm
Prev.
button to select the PICTURE menu.
2. Press the
button and then use D
/ E button to select CSM.
3. Press the
button and then use D
/E
button to select the desired colour temperature.
4. Press the EXIT button to save the new settings.
• Each press of D / E button changes the screen display as shown below.
Cool
18 Plasma Monitor
Normal
Warm
Cool
Normal
TIME0
User
User
Operation
ENGLISH
Manual Colour Temperature Control (CSM
(CSM set to user option)
- You can adjust red, green, or blue to any colour temperature you prefer.
1. Press the MENU button and then use
D /E
button to select the PICTURE menu.
2. Press the
button and then use
3. Press the
button and then use D
/E
button to select User.
4. Press the
button and then use D
/E
button to select Red, Green or Blue.
5. Use the
F / G button
/ E button to select CSM .
to make appropriate adjustments.
• The adjustment range of Red, Green and Blue is -40 ~ +40.
6. Press the EXIT button to save the new settings.
XD
- XD is LG electronic's unique picture improving technology to display a real HD source through an
advanced digital signal processing algorithm.
- It’s not available to use this function in PC[RGB/HDMI] mode.
PICTURE G
PSM
PICTURE0
PSM
SOUND0
CSM
SOUND0
CSM
TIME0
TIME0
SPECIAL0
Advanced
SPECIAL0
Advanced
SCREEN0
Reset
SCREEN0
Reset
Auto
Manual
XD Contrast
On
XD Colour
On
XD NR
Off
MPEG NR
Menu
Menu
Prev.
1. Press the MENU button and then use
D /E
Prev.
button to select the PICTURE menu.
2. Press the
button and then use D
/E
button to select XD.
3. Press the
button and then use D
/E
button to select Auto or Manual.
4. Press the EXIT button to save the new settings.
* Selecting the Manual
This menu is activated after selecting the User1 or User2 of Picture Mode.
1. Press the
button and then
D /E
button to select XD Contrast, XD Colour, XD NR or MPEG NR.
2. Press the
button and then
D /E
button to select On or Off.
3. Press the EXIT button to save the new settings.
•
•
•
•
XD Contrast : Optimizing the contrast automatically according to the brightness of the reflection.
XD Colour : Adjusting the colours of the reflection automatically to reproduce as closely as possible to the natural colours.
XD NR : Removing the noise up to the point where it does not damage the original picture.
MPEG NR : To reduce the picture noise which may appear on the screen during watching the Monitor.
Owner’s Manual 19
Operation
Picture Menu Options
Advanced - Cinema
- Set up the monitor for the best picture appearance for viewing movies.
- This feature operates only in AV, S-Video and Component 480i/576i mode.
PICTURE G
PSM
PICTURE0
PSM
SOUND0
CSM
SOUND0
CSM
TIME0
TIME0
SPECIAL0
Advanced
SPECIAL0
Advanced
SCREEN0
Reset
SCREEN0
Reset
Cinema
Off
Black level
Auto
Menu
Menu
Prev.
1. Press the MENU button and then use
2. Press the
3. Press the
4. Press the F
D /E
Prev.
button to select the PICTURE menu.
button and then use D
/ E button to select Advanced.
button and then use D
/E
/G
button to select Cinema.
button to select On or Off.
5. Press the EXIT button to save the new settings.
Advanced - Black level
- When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and
the brightness of the screen using the black level of the screen.
- This function works in the following mode: AV (NTSC-M), S-Video (NTSC-M) or HDMI.
1. Press the MENU button and then use
D /E
button to select the PICTURE menu.
2. Press the
button and then use D
/E
button to select Advanced.
3. Press the
button and then use D
/E
button to select Black level.
4. Press the F / G button to select Auto, Low or High.
• Low : The reflection of the screen gets darker.
• High : The reflection of the screen gets brighter.
5. Press the EXIT button to save the new settings.
Reset
This function operates in current mode.
To initialize the adjusted value
PICTURE G
PSM
PICTURE0
PSM
SOUND0
CSM
SOUND0
CSM
TIME0
Menu
TIME0
SPECIAL0
Advanced
SPECIAL0
Advanced
SCREEN0
Reset
SCREEN0
Reset
Prev.
Menu
1. Press the MENU button and then
2. Press the G button and then D /
3. Press the G button.
20 Plasma Monitor
Prev.
button to select the PICTURE menu.
button to select Reset.
To set
Operation
ENGLISH
Sound Menu Options
SSM
- This function lets you enjoy the best sound without any special adjustment because the set automatically selects the
appropriate sound option based on the program content.
PICTURE0
SSM
PICTURE0
SSM
SOUND
AVL
SOUND0
AVL
TIME0
Balance
SPECIAL0
Speaker
SCREEN0
Menu
TIME0
Balance
SPECIAL0
Speaker
Flat
Menu
Surround MAX
Flat
Music
Music
Movie
Sports
User
SCREEN0
Prev.
Surround MAX
Prev.
Movie
Sports
User
• You can also select Surround MAX, Flat, Music, Movie, Sports or User in the SOUND menu.
• The sound Surround MAX, Flat, Music, Movie and Sports are programmed for good sound reproduction at the factory and cannot be changed.
TruSurround XT
is a trademark of SRS Labs, Inc.
- TruSurround XT technology is incorporated under license from SRS Labs, Inc.
AVL (Auto Volume
Volume Leveler)
- This feature maintains an equal volume level; even if you change channels.
PICTURE0
SSM
PICTURE0
SSM
SOUND
AVL
SOUND0
TIME0
Balance
SPECIAL0
Speaker
SCREEN0
Menu
AVL
TIME0
Balance
SPECIAL0
Speaker
On
Off
SCREEN0
Prev.
Menu
1. Press the MENU button and then use
D /E
Prev.
button to select the SOUND menu.
2. Press the
button and then use
D /E
button to select AVL.
3. Press the
button and then use
D /E
button to select On or Off.
4. Press the EXIT button to save the new settings.
Owner’s Manual 21
Operation
Sound Menu Options
Balance
PICTURE0
SSM
PICTURE0
SSM
SOUND
AVL
SOUND0
AVL
TIME0
Balance
SPECIAL0
Speaker
SCREEN0
Menu
TIME0
Balance
SPECIAL0
Speaker
0G
SCREEN0
Menu
Prev.
1. Press the MENU button and then use D
/E
Prev.
button to select the SOUND menu.
2. Press the
button and then use
D /E
button to select Balance.
3. Press the
button and then use
F /G
button to make appropriate adjustments.
4. Press the EXIT button to save the new settings.
Speaker
PICTURE0
SSM
PICTURE0
SSM
SOUND
AVL
SOUND0
AVL
TIME0
Balance
SPECIAL0
Speaker
TIME0
Balance
SPECIAL0
Speaker
On
Off
SCREEN0
Menu
SCREEN0
Menu
Prev.
1. Press the MENU button and then use
D /E
button to select the SOUND menu.
2. Press the
button and then use
D /E
button to select Speaker.
3. Press the
button and then use
D /E
button to select On or Off.
4. Press the EXIT button to save the new settings.
22 Plasma Monitor
Prev.
Operation
ENGLISH
T imer Menu Options
Clock Setup
- If current time setting is wrong, correct the clock setting.
PICTURE0
Off time
TIME
On time
SPECIAL0
PICTURE0
Clock
SOUND0
Auto sleep
Menu
Off time
TIME0
On time
SPECIAL0
SCREEN0
Clock
SOUND0
--
--
Auto sleep
SCREEN0
Menu
Prev.
1. Press the MENU button and then use
D /E
Prev.
button to select the TIME menu.
2. Press the
button and then use
D /E
button to select Clock.
3. Press the
button and then use
D /E
button to set the hour.
4. Press the
button and then use
D /E
button to set the minutes.
5. Press the EXIT button to save the new settings.
On/Off
On/Off Time Setup
- Timer function operates only if current time has already been set.
- Off-Time function overrides On-Time function if they are set to the same time.
- If you do not press any button within 2 hours after the monitor turns on with the On Time function, the monitor will automatically revert to standby mode.
PICTURE0
PICTURE0
Clock
Clock
SOUND0
Off time
SOUND0
Off time
TIME
On time
TIME0
On time
SPECIAL0
Auto sleep
SPECIAL0
Auto sleep
SCREEN0
SCREEN0
On
Off
-Volume
Menu
Menu
Prev.
1. Press the MENU button and then use
2. Press the
button and then use
D /E
D /E
-30
Prev.
button to select the TIME menu.
button to select Off time or On time.
3. Press the G button and then use D / E button to select On.
• To cancel On/Off time function, select Off.
4. Press the
button and then use
D /E
5. Press the
button and then use
D /E
For only On time function; Press the
button to set the hour.
button to set the minutes.
button and then use
D /E
button to set volume level.
6. Press the EXIT button to save the new settings.
Owner’s Manual 23
Operation
T imer Menu Options
Auto sleep
- If there is no input signal, the Monitor turns off automatically after 10 minutes.
PICTURE0
PICTURE0
Clock
Off time
SOUND0
Off time
TIME
On time
TIME0
On time
SPECIAL0
Auto sleep
SPECIAL0
SCREEN0
SCREEN0
Menu
Clock
SOUND0
Menu
Prev.
1. Press the MENU button and then use
2. Press the G button and then use
3. Press the G button and then use
D /E
D /E
button to select the TIME menu.
/ E button to select Auto sleep.
button to select On or Off.
4. Press the EXIT button to save the new settings.
24 Plasma Monitor
Prev.
Auto sleep
On
Off
Operation
ENGLISH
Special Menu Options
Child Lock
- The monitor can be set up so that it can only be used with the remote control.
- This feature can be used to prevent unauthorized viewing by disabling the front panel controls.
- This Monitor is programmed to remember which option it was last set to even if you turn the monitor off.
PICTURE0
Language
PICTURE0
Language
SOUND0
Child lock
SOUND0
Child lock
TIME0
SPECIAL G
SCREEN0
Menu
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
Low power
Demo
1. Press the MENU button and then use
2. Press the
button and then use
3. Press the G button and then use
D /E
• When you select On, the display ‘
on the front panel is pressed.
Prev.
button to select the SPECIAL menu.
button to select Child lock.
D /E
D /E
Off
Tile mode
Demo
Menu
On
Set ID
Low power
Prev.
ISM Method
button to select On or Off.
Child lock On’
appears on the screen if any button
4. Press the EXIT button to save the new settings.
-In setting Child lock ‘On’, if the monitor is turned off with the remote control, press the
SELECT on the monitor or POWER, INPUT on the remote control to turn the monitor on.
/ I, INPUT
ISM (Image Sticking Minimization) Method
- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in an ghost
image remaining; even when you change the image. Avoid allowing a fixed or still image to remain on the Monitor's
screen for a long period of time.
PICTURE0
Language
PICTURE0
Language
SOUND0
Child lock
SOUND0
Child lock
TIME0
SPECIAL
SCREEN0
Menu
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
ISM Method
White wash
Orbiter
Low power
Demo
Demo
Menu
1. Press the MENU button and then use D
/E
Normal
Tile mode
Low power
Prev.
Set ID
Inversion
Orb. + lnv.
Prev.
button to select the SPECIAL menu.
2. Press the
button and then use
D /E
button to select ISM Method.
3. Press the
button and then use
D /E
button to select either Normal, White wash, Orbiter, Inversion or Orb.+lnv..
• Normal
If image sticking is never a problem, ISM is not necessary - set this to Normal.
• White wash
White Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to
clear completely using White Wash. To return to normal viewing, press the any button.
• Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To
avoid a permanent image on the screen, the image will move every 2 minutes.
• Inversion
Inversion will automatically invert the plasma display panel colour every 30 minutes.
• Orb. + lnv.
This function inverts the panel color of the screen and may help prevent ghost images. The panel color is automatically
inverted every 30 minutes and the screen will move every 2 minutes.
4. Press the EXIT button to save the new settings.
Owner’s Manual 25
Operation
Special Menu Options
Tile mode
• Tile Mode Tile mode and choose Tile alignment and set the ID of the current product to set location.
PICTURE0
Language
PICTURE0
Language
Tile mode
Off
SOUND0
Child lock
SOUND0
Child lock
Natural
Off
ISM Method
Tile ID
Set ID
H-Size
TIME0
SPECIAL
SCREEN0
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
Tile mode
V-Size
Low power
Low power
H-Position
Demo
Demo
V-Position
Reset
Menu
Menu
Prev.
It is used to
enlarge the screen
and also used with
several products
to view screen.
FG
FG
To set
Prev.
* Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4)
- 4 x 4 available.
- Configuration of an integration screen is also available as well as configuration of One by one Display.
- Tile mode (product 1 ~ 9) : r(3) x c(3)
- Tile mode (product 1 ~ 4) : r(2) x c(2)
row
row
column
column
- Tile mode (product 1 ~16) : r(4) x c(4)
row
column
26 Plasma Monitor
Operation
ENGLISH
- Tile mode (product 1 ~ 2) : r(2) x c(1)
row
column
PICTURE0
Language
PICTURE0
Language
Tile mode
Off
SOUND0
Child lock
SOUND0
Child lock
Natural
Off
ISM Method
Tile ID
Set ID
H-Size
TIME0
SPECIAL G
SCREEN0
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
Tile mode
V-Size
Low power
Low power
H-Position
Demo
Demo
V-Position
FG
FG
To set
Reset
Menu
Menu
Prev.
1. Press the MENU button and then use
2. Press the
button and then use
3. Press the
button and then
D /E
D /E
/ E or
Prev.
button to select the SPECIAL menu.
button to select Tile mode.
button to adjust the position.
4. Press the EXIT button to save the new settings.
• Natural
• Tile ID
• H Size
• V Size
• H-Position
• V-Position
• Reset
The image is omitted by the distance between the screens to be naturally shown.
Select the location of the Tile by setting an ID.
Adjust the horizontal size of the screen taking into account the size of the bezel.
Adjust the vertical size of the screen taking into account the size of the bezel.
Moving the screen position horizontally.
Moving the screen position vertically.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to Full screen.
Low Power
- Low power reduces the plasma display's power consumption.
PICTURE0
Language
PICTURE0
Language
SOUND0
Child lock
SOUND0
Child lock
TIME0
SPECIAL G
SCREEN0
Menu
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
ISM Method
Set ID
Tile mode
Low power
Low power
Demo
Demo
Menu
Prev.
1. Press the MENU button and then use D
/E
Off
On
Prev.
button to select the SPECIAL menu.
2. Press the
button and then use
D /E
button to select Low power.
3. Press the
button and then use
D /E
button to select On or Off.
• When you select On, the screen darkens.
4. Press the EXIT button to save the new settings.
Owner’s Manual 27
Operation
Special Menu Options
XD DEMO
- Use it to see the difference between XD Demo on and XD Demo off.
- It’s not available to use this function in RGB[PC], HDMI[PC] mode.
PICTURE0
Language
PICTURE0
Language
SOUND0
Child lock
SOUND0
Child lock
TIME0
SPECIAL G
SCREEN0
Menu
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
ISM Method
Set ID
Tile mode
Low power
Low power
Demo
Demo
Menu
Prev.
1. Press the MENU button and then
D /E
2. Press the
button and then use
3. Press the
button to begin XD Demo.
button to select the SPECIAL menu.
button to select XD Demo.
4. To stop XD Demo, press the MENU or EXIT button.
28 Plasma Monitor
Prev.
To start
Operation
ENGLISH
Screen Menu Options
Auto Configure
- Automatically adjusts picture position and minimizes image shaking.
- This function works in the following mode : RGB[PC].
PICTURE0
Manual config.
SOUND0
XGA Mode
TIME0
TIME0
ARC
SPECIAL0
SPECIAL0
Reset
SCREEN G
Menu
PICTURE0
Auto config.
SOUND0
SCREEN0
Menu
Prev.
1. Press the MENU button and then use
2. Press the
button and then use
Auto config.
To set
Manual config.
XGA Mode
ARC
Reset
Prev.
button to select the SCREEN menu.
button to select Auto config..
3. Press the G button to start Auto config..
• When Auto config. has finished, OK will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment again.
4. If picture needs to be adjusted more after Auto adjustment in RGB (PC), you can adjust the Manual config..
5. Press the EXIT button to save the new settings.
Manual Configure
- This function works in the following mode:
RGB[PC], RGB[DTV], HDMI[DTV], COMPONENT[DTV] mode only
- If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually (RGB-PC mode only).
- To correct the screen size, adjust Clock (RGB-PC mode only).
PICTURE0
Manual config.
SOUND0
XGA Mode
TIME0
TIME0
ARC
SPECIAL0
SPECIAL0
Reset
SCREEN G
Menu
PICTURE0
Auto config.
SOUND0
SCREEN0
Prev.
Menu
1. Press the MENU button and then
2. Press the
button and then
3. Press the
button and then
4. Press the
Auto config.
Manual config.
XGA Mode
ARC
Phase
Clock
H-Position
V-Position
Reset
Prev.
button to select the SCREEN menu.
button to select Manual config..
button to select Phase, Clock, H-Position or V-Position.
button to make appropriate adjustments.
5. Press the EXIT button to save the new settings.
Owner’s Manual 29
Operation
Screen Menu Options
Selecting XGA mode
- To see a normal picture, match the resolution of RGB mode and selection of XGA mode.
- This function works in the following mode : RGB[PC]
PICTURE0
SOUND0
TIME0
SPECIAL0
SCREEN G
Menu
1.
2.
3.
4.
5.
Auto config.
PICTURE0
Manual config.
SOUND0
XGA Mode
TIME0
ARC
SPECIAL0
Reset
SCREEN0
Prev.
Menu
Auto config.
Manual config.
XGA Mode
1024x768
1280x768
ARC
1360x768
Reset
1366x768
Prev.
Press the MENU button and then use D / E button to select the SCREEN menu.
Press the G button and then use D / E button to select XGA Mode.
Press the G button and then use D / E button to select the desired XGA resolution.
Press the SET button.
Press the EXIT button to save the new settings.
Setting the Picture Format
- You can watch the screen in various picture formats; Spectacle, Full, Original, 4:3, 16:9, 1:1, 14:9, Zoom1, Zoom2.
PICTURE0
PICTURE0
Auto config.
Manual config.
SOUND0
SOUND0
XGA Mode
TIME0
TIME0
ARC
SPECIAL0
SPECIAL0
Reset
SCREEN G
SCREEN0
Auto config.
Manual config.
XGA Mode
ARC
Reset
Spectacle
Full
Original
4:3
16:9
1:1
14:9
Zoom1
Menu
Menu
Prev.
1. Press the MENU button and then use
2. Press the
button and then use
Prev.
Zoom2
button to select the SCREEN menu.
button to select ARC.
3. Press the G button and then use D / E button to select Spectacle, Full, Original, 4:3, 16:9, 1:1, 14:9 or Zoom 1/2.
• Spectacle
When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally, in a nonlinear proportion, to fill the entire screen.
• Full
When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear
proportion, to fill the entire screen fully. (Europe an version only)
• Original
When your AV receives the wide screen signal, it will be automatically changed to picture format to be sent.
• 4:3
This pIcture format is 4:3 of general AV.
• 16:9
You can enjoy movies (the picture format of 16:9) or general TV programmes thorough 16:9 mode. Programmes with
16:9 format are viewed naturally but 4:3 programmes are magnified on the left and right so that the screen is16:9 format.
• 1:1
This pIcture format is 1:1 of general AV. (only RGB PC, HDMI/DVI PC)
• 14:9
You can enjoy the picture format of 14:9 or general AV programmes through 14:9 mode.
Programmes with 14:9 are viewed naturally, but 4:3 programmes are magnified on the top/bottom and left/right sides.
• Zoom1, 2
You can enjoy movies on a vast screen through Zoom mode. The 4:3 programmes are magnified on the top/bottom
and left/right sides so that screen is 16:9 format. The bottom and top of the picture may be lost.
4. Press the EXIT button to save the new settings.
30 Plasma Monitor
Operation
ENGLISH
MODE
AV
HDMI/DVI
component
ARC
RGB
DTV
PC
DTV
PC
Spectacle
Full
Original
4:3
16:9
14:9
Zoom1
Zoom2
1:1
Initializing (Reset to original factory settings)
- This function operates in current mode.
- To initialize the adjusted value
PICTURE0
SOUND0
TIME0
SPECIAL0
SCREEN G
Menu
Auto config.
PICTURE0
Manual config.
SOUND0
XGA Mode
TIME0
ARC
SPECIAL0
Reset
SCREEN0
Prev.
Menu
1. Press the MENU button and then
2. Press the G button and then D /
Auto config.
Manual config.
XGA Mode
ARC
Reset
To set
Prev.
button to select the SCREEN menu.
button to select Reset.
3. Press the G button.
• You can initialize Phase, Clock, H-Position, V-Position (Except ARC).
Owner’s Manual 31
External Control Device Setup
External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)
and control the Monitor’s functions externally.
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
- RS-232C connection cables are not supplied with the Monitor.
REMOTE
CONTROL IN
RS-232C
(CONTROL&SERVICE)
HDMI/DVI IN
AUDIO
(RGB/DVI)
RGB
COMPONENT IN
VIDEO
32 Plasma Monitor
OUT
OUT
IN
IN
AV IN
L-AUDIO-R
EXTERNAL SPEAKER
L-AUDIO-R
VIDEO
S-VIDEO
AV
OUT
External Control Device Setup
ENGLISH
Set ID
- Use this function to specify a monitor ID number.
- Refer to ‘Real Data Mapping 1’. See page 35.
PICTURE0
Language
PICTURE0
Language
SOUND0
Child lock
SOUND0
Child lock
TIME0
SPECIAL G
SCREEN0
Menu
ISM Method
TIME0
Set ID
SPECIAL0
Tile mode
SCREEN0
ISM Method
Set ID
Low power
Low power
Demo
Demo
Menu
Prev.
1. Press the MENU button and then use the
2. Press the
button and then use
D /E
3. Press the
button and then use
F /G
D /E
Tile mode
Prev.
button to select the SPECIAL menu.
button to select Set ID.
button to adjust Set ID to choose the desired monitor ID number.
• The adjustment range of Set ID is 1 ~ 99.
Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a straight cable.
Transmission / Receiving Protocol
Command Reference List
Transmission
COMMAND 1 COMMAND 2
DATA
(Hexadecimal)
01. Power
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Colour
10. Tint
11. Sharpness
12. OSD Select
13. Remote Lock /Key Lock k
14. Balance
15. Colour Temperature
16. Abnormal state
17. ISM mode
18. Auto Configure
19. Key
20. Tile Mode
21. Tile H Size
22. Tile V Size
23. Tile ID Set
24. Natural Mode (In Tile mode)d
0~1
2~9
1~9
0~1
0~1
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0~1
0~1
0 ~ 64
0~3
FF
0~8
Key Code
0 ~ 44
0 ~ 64
0 ~ 64
0 ~ 10
0~1
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: k, j, m,d
* [Command 2]: To control Plasma Monitor set.
* [Set ID]: You can adjust the set ID to choose desired monitor ID number in Special menu. Adjustment range
is 1 ~ 99. When selecting Set ID ‘0’, every connected Plasma Monitor set is controlled. Set ID is
indicated as decimal (1~99) on menu and as
Hexa decimal (0x0~0x63) on transmission/receiving protocol.
* [DATA]: To transmit command data.
Transmit ‘FF’ data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* * If there is error, it returns NG
Owner’s Manual 33
External Control Device Setup
01. Power (Command 2:a)
04. Screen Mute (Command 2:d)
G To control Power On/Off of the Monitor.
G To select screen mute on/off.
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
[k][d][ ][Set ID][ ][Data][Cr]
1 : Power On
Acknowledgement
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
[a][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
G To show Power On/Off.
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback
presents status about each function.
05. Volume Mute (Command 2:e)
G To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
02. Input Select (Command 2:b) (Main Picture Input)
G To select input source for the Monitor.
You can also select an input source using the INPUT
button on the Monitor's remote control.
Transmission
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
[k][b][ ][Set ID][ ][Data][Cr]
Data 2 : AV
4 : Component1
5 : Component2
: RGB (DTV)
: RGB (PC)
: HDMI/DVI(DTV)
: HDMI/DVI(PC)
Acknowledgement
G To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
[b][ ][Set ID][ ][OK][Data][x]
Data 2 : AV
4 : Component1
5 : Component2
06. Volume Control (Command 2:f)
[k][f][ ][Set ID][ ][Data][Cr]
: RGB (DTV)
: RGB (PC)
: HDMI/DVI(DTV)
: HDMI/DVI(PC)
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping1’. See page 35.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
03. Aspect Ratio (Command 2:c) (Main picture format)
G To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1
: Normal screen (4:3)
: Wide screen (16:9)
: Horizon (Spectacle)
: Zoom1
: Zoom2
: Original
: 14 : 9
: Full (Europe version only)
: 1 : 1 (PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
34 Plasma Monitor
Data Min : 0 ~ Max : 64
External Control Device Setup
10. Tint (Command2:j) (Video only)
G To adjust screen contrast.
You can also adjust contrast in the picture menu.
G To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping1’ as shown below.
Data Red : 0 ~ Green : 64
• Refer to ‘Real data mapping 1’.
Acknowledgement
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 0 ~ Max : 64
Data Red : 0 ~ Green : 64
* Real data mapping 1
0 : Step 0
11. Sharpness (Command2:k)
A : Step 10 (SET ID 10)
G To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
Transmission
63 : Step 99 (SET ID 99)
64 : Step 100
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping 1’.
Acknowledgement
[k][k][ ][Set ID][ ][Data][Cr]
[k][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h)
Data Min : 0 ~ Max : 64
G To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission
12. OSD Select (Command2:l)
[k][h][ ][Set ID][ ][Data][Cr]
G To select OSD (On Screen Display) on/off.
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping 1’.
Transmission
Acknowledgement
Data 0: OSD off
[h][ ][Set ID][ ][OK][Data][x]
Data Min : 0 ~ Max : 64
[k][l][ ][Set ID][ ][Data][Cr]
1: OSD on
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0: OSD off
1: OSD on
13. Remote Lock /Key Lock (Command2:m)
09. Colour (Command2:i)
G To adjust the screen colour.
You can also adjust colour in the Picture menu.
Transmission
G To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the remote
control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping 1’.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data 0: off
1: on
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0: off
1: on
Data Min : 0 ~ Max : 64
Owner’s Manual 35
ENGLISH
07. Contrast (Command 2:g)
External Control Device Setup
14. Balance (Command2:t)
18. Auto Configure (Command: j u)
G To adjust balance.
G To adjust picture position and minimize image shaking
automatically. Auto Configure only works in RGB-PC
mode.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping 1’. See page 35.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 1: To set
[t][ ][Set ID][ ][OK][Data][x]
Acknowledgement
Data Min: 0 ~ Max: 64
* Balance : L50 ~ R50
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command: m c)
15. Colour Temperature (Command2:u)
G To adjust Key code for IR remote control.
G To adjust colour temperature.
You can also adjust ACC in the Picture menu.
Transmission
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Normal 1: Cool
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to See page 39.
2: Warm
3: User
Acknowledgement
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
[u][ ][Set ID][ ][OK][Data][x]
Data 0: Normal 1: Cool
2: Warm
3: User
16. Abnormal state (Command2 : z)
G Abnormal State : Used to Read the power off status
when Stand-by mode.
Transmission
20. Tile Mode(Command : d d)
G Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][x]
Data
Description
[k][z][ ][Set ID][ ][Data][Cr]
00
Tile mode is off.
Data FF : Read
0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
12
1 x 2 mode(column x row)
13
1 x 3 mode
14
1 x 4 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
[d][ ][Set ID][ ][OK][Data][x]
17. ISM mode(Command: j p)
G Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1
Inversion
Orbiter
Orb.+Inv.
White Wash
Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
36 Plasma Monitor
...
...
44
4 x 4 mode
External Control Device Setup
24. Natural Mode (In Tile mode) (Command : d j)
G To set the Horizontal size.
Transmission
G The image is omitted by the distance between the
screens to be naturally shown.
[d][g][ ][Set ID][ ][Data][x]
Transmission
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping 1’. See page 35.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
[d][j][ ][Set ID][ ][Data][x]
Data 0 : Natural Off
1 : Natural On
ff : Read Status
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
22. Tile V Size(Command : d h)
G To set the Vertical size.
Transmission
[d][h][ ][Set ID][ ][Data][x]
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping 1’. See page 35.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
23. Tile ID Set (Command : d i)
G To assign the Tile ID for Tiling function .
Transmission
[d][i][ ][Set ID][ ][Data][x]
Data Min: 0 ~ Max: 10
• Refer to ‘Real data mapping 1’. See page 35.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Owner’s Manual 37
ENGLISH
21. Tile H Size(Command : d g)
IR Code
IR Code
How to Connect
G Connect your wired remote control to the Remote Control port on the Monitor.
Remote Control IR Code
G Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
TC
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
G Configuration of frame
• 1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
• Repeat frame
Repeat code
Tf
G Lead code
9 ms
4.5 ms
0.55 ms
G Repeat code
9 ms
2.25 ms
G Bit description
• Bit “0”
• Bit “1”
0.56 ms
0.56 ms
1.12 ms
2.24 ms
G Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
38 Plasma Monitor
IR Code
Function
10
11
12
13
14
15
16
17
18
19
0E
09
08
02
03
44
0B
43
79
Number Key 0
Number Key 1
Number Key 2
Number Key 3
Number Key 4
Number Key 5
Number Key 6
Number Key 7
Number Key 8
Number Key 9
SLEEP
MUTE
POWER
VOL+
VOLSET ( )
AII INPUT SELECT
MENU
ARC
07
06
40
41
5B
99
5A
BF
D4
D5
C6
EXIT
Auto config.
Input video
Input Component 1
Input Component 2
Input RGB
Input HDMI/DVI
ENGLISH
Code (Hexa)
Note
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button (Power On/Off)
Discrete IR Code
Discrete IR Code
R/C Button
R/C Button
R/C Button
R/C Button (Spectacle, Full, Original, 4:3, 16:9, 1:1,
14:9, Zoom1, 2 mode Selection)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code (Only RGB mode)
Discrete IR Code (Input Video Selection)
Discrete IR Code (Input Component 1 Selection)
Discrete IR Code (Input Component 2 Selection)
Discrete IR Code (Input RGB Selection)
Discrete IR Code (Input HDMI/DVI Selection)
Owner’s Manual 39
Troubleshooting Checklist
Troubleshooting Checklist
• Check whether the Monitor is turned on.
No picture &
No sound
• Power cord inserted into wall outlet?
• Test the wall power outlet, plug other product’s power cord into the wall outlet
where the Monitor’s power cord was plugged in.
Picture OK &
No sound
• Press the VOLUME (
G)
button.
• Sound muted? Press MUTE button.
• Check to see if there is any object between the Plasma Display and the
remote control causing obstruction.
The remote control
doesn’t work
• Are batteries installed with correct polarity (+ to +, - to -)?
• Install new batteries.
Picture appears slowly
after switching on
• This is normal, the image is muted during the plasma display startup process.
Please contact your service center, if the picture has not appeared after five
minutes.
• Select Colour in the Picture menu and press the
button.
• Keep a sufficient distance between the Monitor and the VCR.
No or Poor colour
or Poor picture
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.)
Horizontal/vertical bars
or picture shaking
• Check for local interference such as an electrical appliance or power tool.
No output from one of
the speakers
• Adjust Balance in the Sound menu.
Unusual sound from
inside the monitor
• A change in ambient humidity or temperature may result in an unusual noise
when the plasma display is turned on or off and does not indicate a fault with
the monitor.
40 Plasma Monitor
Product Specifications
MODELS
ENGLISH
Product Specifications
42PM4M
50PM4M
60PM4M
(42PM4M-WA)
(42PM4MA-WA)
(50PM4M-WA)
(50PM4MA-WA)
(60PM4M-WA)
(60PM4MA-WA)
Width (inches / mm)
42 / 1066
49.3 / 1253
56.9 / 1455
Height (inches / mm)
25.6 / 650
29.3 / 745
34.8 / 883
Depth (inches / mm)
3.9 / 97.5
4.3 / 109.5
4.5 / 112
Weight (pounds / kg)
62.8 / 28.5
85.5 / 38.8
130.5 / 59.2
Power requirement
Resolution
Operating Temperature
Environmental
condition
Operating Humidity
Storage Temperature
Storage Humidity
AC100-240V~ 50/60Hz 3.3A AC100-240V~ 50/60Hz 4.5A AC100-240V~ 50/60Hz 5.8A
1024x 768 (Dot)
1365 x 768 (Dot)
1366 x 768 (Dot)
32 ~ 140°F (0 ~ 60°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 90%
• The specifications shown above may change without notice for quality improvement.
Owner’s Manual 41
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 45 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:60897525-5deb-4129-9372-c44c1160264a Producer : Acrobat Distiller 3.0 for Power Macintosh Create Date : 1904:01:20 22:04:28Z Creator Tool : QuarkXPress3.32: LaserWriter 8 Z1-8.7.1 Modify Date : 2008:04:07 14:30:49+09:00 Metadata Date : 2008:04:07 14:30:49+09:00 Document ID : uuid:5ff415a0-83fb-4e53-b66d-6cb4ff1c92bb Format : application/pdf Title : MFL36274107_en_rev04 Creator : SKJ Author : SKJEXIF Metadata provided by EXIF.tools