| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1374326 |
| Application ID | +t/4kobF/w+53XNcZEsJJA== |
| Document Description | User Manual part 1 of 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 333.01kB (4162600 bits) |
| Date Submitted | 2010-11-10 00:00:00 |
| Date Available | 2010-11-10 00:00:00 |
| Creation Date | 2010-10-19 10:14:38 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2010-11-02 20:33:24 |
| Document Title | PZ5_7_1007.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | User |
SERIAL
MODEL
The model and serial number of the TV is located
on the back and/or one side of the TV.
Record it below should you ever need service.
LED LCD TV MODELS
42LE5500
32LE5400
47LE5500
42LE5400
55LE5500
47LE5400
42LE7500
55LE5400
47LE7500
42LE5350
55LE7500
47LE5350
P/NO : SAC34134203 (1010-REV09)
LCD TV MODELS
32LD550 47LD650
42LD550 55LD650
46LD550
52LD550
60LD550
47LE8500
55LE8500
42LX6500
47LX6500
55LX6500
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
PLASMA TV MODELS
50PZ540
50PK750
60PZ540
60PK750
50PZ550
50PZ750
60PZ550
60PZ750
LED LCD TV / LCD TV
PLASMA TV
OWNERâS MANUAL
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated âdangerous voltageâ within the productâs enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installerâs attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.
FCC Notice
Class B digital device
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two conditions: (1) This device may not cause (harmful)
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation (of the
device).
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the userâs authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any
way without written authorization from LG
Electronics.
Unauthorized modification could void the userâs
authority to operate this product.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
10
Heed all warnings.
Follow all instructions.
Do not use this apparatus
near water.
Clean only with dry cloth.
Do not block any ventilation
openings. Install in accordance
with
the
manufacturerâs
instructions.
Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider
than the other. A grounding
type plug has two blades and a
third grounding prong, The wide
blade or the third prong are
provided for your safety. If the
provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from
being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during
lighting storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
11
Never touch this apparatus or antenna during a thunder or lighting storm.
12
When mounting a TV on the wall, make sure
not to install the TV by the hanging power
and signal cables on the back of the TV.
13
Do not allow an impact shock or any objects
to fall into the product, and do not drop
onto the screen with something.
14
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification
page of this owner's manual to be certain.
Do n ot connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or
damaged or cracked wire insulation are
dangerous . Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized
servicer. Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where the
cord exits the appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug
when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
SAFETY INSTRUCTIONS
15
WARNING - To reduce the risk of
fire or electrical shock, do not
expose this product to rain,
moisture or other liquids. Do not
touch the TV with wet hands. Do
not install this product near
flammable objects such as gasoline or candles or expose the
TV to direct air conditioning.
16
Do not expose to dripping or
splashing and do not place
objects filled with liquids, such
as vases, cups, etc. on or over
the apparatus (e.g. on shelves
above the unit).
17
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV with
a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If
grounding methods are not possible, have a
qualified electrician install a separate circuit
breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
22
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur.
Be sure the antenna system is grounded so
as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information
with respect to proper grounding of the
mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements for
the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Electric Service
Equipment
Power
Supply
Short-circuit
Breaker
18
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
19
As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
20
21
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may
occur. Do not clean with chemicals such as
alcohol, thinners or benzene.
Moving
Make sure the product is turned off, unplugged
and all cables have been removed. It may
take 2 or more people to carry larger TVs. Do
not press against or put stress on the front
panel of the TV.
Grounding Conductor
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
NEC: National Electrical Code
23
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such
as a bookcase. Do not cover the product
with cloth or other materials (e.g.) plastic
while plugged in. Do not install in excessively dusty places.
24
Take care not to touch the ventilation openings. When watching the TV for a long
period, the ventilation openings may
become hot.
25
If you smell smoke or other odors coming
from the TV, unplug the power cord contact
and authorized service center.
26
Do not press strongly upon the
panel with hand or sharp object
such as nail, pencil or pen, or
make a scratch on it.
27
Keep the product away from direct sunlight.
28
Dot Defect
The Plasma or LCD panel is a high technology product with resolution of two million to
six million pixels. In a very few cases, you
could see fine dots on the screen while
youâreviewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
29
Generated Sound
âCrackingâ noise: A cracking noise that occurs
when watching or turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where thermal deformation
is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed
switching circuit, which supplies a large amount
of current to operate a product. It varies
depending on the product.
This generated sound does not affect the
performance and reliability of the product.
30
For LED LCD TV/LCD TV
If the TV feels cold to the touch, there may be
a small âflickerâ when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitorâs performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
31
Viewing 3D Imaging (For 3D TV)
ĹšWhen viewing 3D imaging, watch the
TV from an effective viewing angle and
within the appropriate distance. If you exceed this viewing angle or distance, you
may not be able to view the 3D imaging.
Furthermore, the 3D imaging may not
display if it is viewed while you are lying
down.
ĹšIf you watch the 3D imaging too closely
or for a long period of time, it may harm
your eyesight.
ĹšWatching the TV or playing video games
that incorporate 3D imaging with the
3D glasses for a long period of time can
cause drowsiness, headaches or fatigue
to you and/or your eyes. If you have a
headache, or otherwise feel fatigued or
drowsy, stop watching the TV and take a
rest.
ĹšPregnant woman, seniors, persons with
heart problems or persons who experience frequent drowsiness should refrain
from watching 3D TV.
ĹšSome 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
Ĺš Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.
ĹšWarning for photosensitization seizure:
Some viewers may experience a seizure
or epilepsy when exposed to certain factors, including ďŹashing lights or images
in TV or video games. If you or anybody
from your family has a history of epilepsy
or seizure, please consult with your doctor before watching 3D TV.
SAFETY INSTRUCTIONS
Also certain symptoms can occur in unspeciďŹed conditions without any previous history. If you experience any of the
following symptoms, immediately stop
watching the 3D imaging and consult a
doctor: dizziness or lightheadedness, visual transition or altered vision, visual or
facial instability, such as eye or muscle
twitching, unconscious action, convulsion,
loss of conscience, confusion or disorientation, loss of directional sense, cramps,
or nausea. Parents should monitor their
children, including teenagers, for these
symptoms as they may be more sensitive
to the effects of watching 3D TV.
Risk of photosensitization seizure can be
reduced with the following actions.
- Take frequent breaks from watching 3D
TV.
- For those who have vision that is different in each eye, they should watch the
TV after taking vision correction measures.
- Watch the TV so that your eyes are on
the same level as the 3D screen and
refrain from sitting too closely to the TV
- Do not watch the 3D imaging when
tired or sick, and avoid watching the 3D
imaging for a long period of time.
- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on
a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness of your situation before moving.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a small amount of mercury. Do not
dispose of this product with general household waste. Disposal of this product must be
carried out in accordance to the regulations of
your local authority.
CONTENTS
WARNING / CAUTION ............................2
SAFETY INSTRUCTIONS ........................3
CONTENTS ......................................................6
FEATURE OF THIS TV ..............................9
PREPARATION
Accessories...........................................................10
Optional Extras ..................................................... 11
Front Panel Information .................................... 12
Back Panel Information..................................... 17
Stand Instructions .....................................................20
VESA Wall Mounting ........................................26
Cable Management ..........................................28
Desktop Pedestal Installation .......................... 31
Swivel Stand ......................................................... 31
Attaching the TV to a Desk ............................32
Kensington Security System ..........................32
Securing the TV to the wall to prevent falling
when the tv is used on a stand .....................33
Antenna or Cable Connection.......................34
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup............................................35
DVD SETUP.........................................................39
VCR SETUP.........................................................42
Other A/V Source Setup.................................44
USB Connection ................................................45
Headphone Setup....................................................46
Audio Out Connection ..................................... 47
External Equipment WIreless Connection
(Optional Extras).................................................48
PC Setup..............................................................49
Network Setup ....................................................55
WATCHING TV / CHANNEL CONTROL
Remote Control Functions ..............................63
Turning on the TV..............................................66
Channel Selection..............................................66
Volume Adjustment ..........................................66
Initial Setting ....................................................... 67
On-Screen Menus Selection .......................... 69
Quick Menu .......................................................... 71
Customer Support
- Software Update............................................. 72
- Picture Test/Sound Test................................ 73
- Product/Service Info...................................... 74
- Network Test..................................................... 74
Simple Manual.................................................... 75
Channel Setup
- Auto Scan (Auto Tuning).............................. 76
- Add/Delete Channel (Manual Tuning) ..... 77
- Channel Editing............................................... 78
Favorite Channel Setup.................................... 79
Favorite Channel List ........................................ 79
Channel List ....................................................... 80
Channel Information .......................................... 81
Channel Brief Information...............................82
Input List ..............................................................83
Input Label...........................................................84
Reset to Factory Default (Initial Setting) .....85
Mode Setting ......................................................86
Demo Mode ........................................................ 87
AV Mode...............................................................88
Game.....................................................................89
SIMPLINK.............................................................90
3D VIDEO
3D Video...............................................................92
MY MEDIA
Entry Mode ..........................................................96
Connection Method .......................................... 97
Movie list............................................................. 102
Photo list............................................................. 109
Music list.............................................................. 115
DivX Registration Code.................................. 120
Deactivation ........................................................ 121
NETWORK
Legal Notice ...................................................... 122
NETCAST
Netcast Menu.................................................... 123
YOUTUBE........................................................... 124
PICASA............................................................... 126
PICTURE CONTROL
Picture Size (Aspect Ratio) Control............ 128
Picture Wizard................................................... 130
á°Energy Saving ............................................ 132
Preset Picture Settings (Picture Mode)..... 133
Manual Picture Adjustment - User Mode 134
Picture Improvement Technology (Advanced
Control) ............................................................... 135
Expert Picture control..................................... 136
Picture Reset..................................................... 139
TruMotion ......................................................... 140
LED Local Dimming ........................................141
Power Indicator ................................................ 142
Image Sticking Minimization (ISM) Method . 143
SOUND & LANGUAGE CONTROL
Auto Volume...................................................... 144
Clear Voice II ..................................................... 145
Balance ............................................................... 146
Preset Sound Settings (Sound Mode) .......147
Sound Setting Adjustment - User Mode. 148
Audio Reset....................................................... 149
TV Speakers On/Off Setup .......................... 150
Stereo/SAP Broadcast Setup ....................... 151
Audio Language ............................................. 152
On-screen Menus Language Selection .... 153
Caption Mode
- Analog Broadcasting System Captions . 154
- Digital Broadcasting System Captions... 155
- Caption Option.............................................. 156
TIME SETTING
Clock Setting
- Auto Clock Setup ..........................................157
- Manual Clock Setup .................................... 158
Auto On/Off Time Setting ............................ 159
Sleep Timer Setting ........................................ 160
PARENTAL CONTROL / RATINGS
Set Password & Lock System
- Setting up Your Password ............................161
- Set Password ................................................. 162
- Lock System................................................... 163
Channel Blocking............................................. 164
Movie & TV Rating .......................................... 165
Downloadable Rating.......................................170
External Input Blocking ....................................171
Key Lock ..............................................................172
APPENDIX
Troubleshooting.................................................173
Maintenance.......................................................176
Product Specifications ....................................177
IR Codes............................................................. 182
External Control Through RS-232C .......... 184
Open Source License..................................... 190
FEATURE OF THIS TV
ᯍ
Some of these features are not available on all models.
High-definition
television.
Highresolution digital television broadcast
and playback system composed of
roughly a million or more pixels, 16:9
aspect-ratio screens, and AC3 digital
audio. A subset of digital television,
HDTV formats include 1080p, 1080i,
and 720p resolutions.
Manufactured under license from Dolby
Laboratories. âDolby âand the double-D
symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC."
ABOUT DIVX VIDEO: DivXÂŽ is a digital
video format created by DivX,Inc. This is
an official DivX Certified device that
plays DivX video. Visit www.divx.com for
more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX CertifiedÂŽ device must be
registered in order to play DivX Videoon-Demand (VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup
menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
âDivX CertifiedÂŽ to play DivXÂŽ video up
to HD 1080p, including premium contentâ
âDivXÂŽ, DivX CertifiedÂŽ and associated
logos are registered trademarks of
DivX, Inc. and are used under license.â
Pat. 7,295,673; 7,460,668; 7,515,710;
7,519,274
This TV contains the detailed calibrations necessary for professional certification by the Imaging Science
Foundation. The resulting ISF âdayâ and
ânightâ modes will then be accessible
by the user to experience the best their
LG HDTV has to offer.
Sophisticated and detailed calibrations
can be made through the ISFccc mode.
Detailed calibration requires a licensed
technician.
Please contact your local dealer to
inquire about an ISF certified technician.
THX (Thomlinson Holmanâs Experiment)
is an audio and video certification standard established by George Lucas and
Thomlinson. A THX certified display
guarantees screen quality that exceeds
the display standard specification in
both hardware and software.
View videos and photos and listen to
music on your TV through USB 2.0
(âvideosâ dependent on model).
Displays HDTV programs in full 1920 x
1080p resolution for a more detailed
picture.
IMPORTANT INFORMATION TO PREVENT âIMAGE
BURN / BURN-INâ ON YOUR TV SCREEN
ᯍ
ᯍ
ᯍ
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed
on the TV for an extended period, it can become permanently imprinted on the screen. This
phenomenon is known as âimage burnâ or âburn-in.â Image burn is not covered under the manufacturerâs warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged
period (2 or more hours for LCD, 1 or more
hours for Plasma).
Image burn can also occur on the letterboxed areas of your TV if you use the 4:3
aspect ratio setting for an extended period.
PREPARATION
PREPARATION
ACCESSORIES
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
The accessories included may differ from the images below.
1.5V 1.5V
Ownerâs Manual
CD Manual,
Nero MediaHome 4
Essentials CD
Remote Control,
Batteries (AAA)
Option Extras
Not included with all models
When using the VGA (D-sub 15
pin cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain standards compliance.
* Wipe spots on the exterior only with the
polishing cloth.
Polishing Cloth
* Do not wipe roughly when removing
stains. Excessive pressure may cause
scratches or discoloration.
D-sub 15 pin Cable
Not included with all models
Ferrite Core
(Black)
Ferrite Core
(White)
Ferrite core can be used to reduce the electromagnetic
waves that may interfere with the TV. Install the Ferrite
core on the power cable close to the wall plug.
Close to the wall plug.
Ferrite core can be used to reduce the electromagnetic
wave when connecting the LAN cable. Place the ferrite
core far from TV and wind the LAN cable in the ferrite
core once.
Plasma TV
(For 50PK750)
x3
(50PZ540, 50PZ550,
50PZ750)
x4
(M5 x 14) (M4 x 28)
x3
(M5 x 14)
(For 60PZ540, 60PZ550,
60PZ750)
x4
(M4 x 26)
x4
x4
(M5 x 14) (M4 x 28)
Power Cord
Screws for stand assembly (Refer to P.20)
x2
Cable Holder (Refer to p.28)
10
Protection Cover (Refer to p.21)
32/42/46/52/60LD550, 47/55LD650
x8
(M4 x 20)
Screws for stand assembly
(Refer to P.22)
Protection Cover
(Refer to P.23)
Screw for stand fixing
(Refer to P.32)
Power Cord
PREPARATION
(For 32/42LD550)
42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500
(47/55LE8500)
(55LE5400/5500/7500,
55LX6500, 42LE5350)
x8
(M4 x 20)
x4
(47LE5350)
x4
(M4 x 24) (M4 x 16)
x4
(Other models)
x4
x8
(M4 x 26) (M4 x 16)
(M4 x 16)
Cable Holder
(Refer to p.30)
Screws for stand assembly (Refer to P.24)
x2
(For 42/47/55LE7500)
(For 42/47/55LE7500,
47/55LE8500)
PO
ER
VO
TV
Component gender cable,
AV gender cable
/IN
PU
CH
(For 32LE5400)
FLAS
HBK
1.5V 1.5V
Simple Remote Control,
Batteries (AAA)
Screw for stand fixing
(Refer to P.32)
Cleansing Cloths
(mitt)
* Wipe spots on the exterior only with the cleasing cloths.
* Do not wipe roughly when removing stains. Excessive pressure may cause scratches or discoloration.
* For cleaning front frame, please slowly wipe in one direction
after spraying water 1-2 times on cleansing cloths. Please
remove excessive moisture after cleaning. Excessive moisture may cause water stains on the frame.
OPTIONAL EXTRAS
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV.
(Except 42/47LE5350)
Wireless Media Box
(AN-WL100W)
(Except 42/47LE5350)
(For 42/47/55LX6500, 50/60PZ540,
50/60PZ550, 50/60PZ750)
Wireless LAN for Broadband/
DLNA Adaptor
(AN-WF100)
3D Glasses
(AG-S100)
11
PREPARATION
FRONT PANEL INFORMATION
PREPARATION
ᯍ
Image shown may differ from your TV.
50/6OK750, 50/60PZ540, 50/60PZ550, 50/60PZ750
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
SPEAKER
Intelligent Sensor
Adjusts picture according to the
surrounding conditions
Emitter
(For 50/60PZ540,
50/60PZ550, 50/60PZ750)
It is the part equipped with the
emitter exchanging signal with
3D glasses.
Please be careful not to block
the screen with objects or
people while watching a 3D
Video.
Touch Button
You can operate the button just by touching the button lightly with your finger.
INPUT
MENU
ENTER
POWER INPUT MENU ENTER
Button Button Button Button
12
VOL
VOLUME
(-, +)
Buttons
CH
CHANNEL
(á°, á°)
Buttons
PREPARATION
32/42/46/52/60LD550
CHANNEL
(á°,á°) Buttons
CH
VOLUME (+, -)
Buttons
VOL
ENTER Button
SPEAKER
ENTER
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.Ĺšp.142)
MENU Button
MENU
INPUT Button
INPUT
POWER Button
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the
surrounding conditions
13
PREPARATION
PREPARATION
ᯍ
Image shown may differ from your TV.
47/55LD650
CH
VOL
CHANNEL
(á°,á°) Buttons
VOLUME (+, -)
Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
SPEAKER
INPUT Button
POWER Button
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.Ĺšp.142)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding conditions
14
PREPARATION
42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 42/47/55LX6500
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
(Can be adjusted using the Power Indicator in
the OPTION menu.Ĺšp.142)
SPEAKER
Emitter
(For 42/47/55LX6500)
It is the part equipped with
the emitter exchanging
signal with 3D glasses.
Please be careful not to
block the screen with
objects or people while
watching a 3D Video.
Touch Button
You can operate the button just by touching the button lightly with your finger.
CH
VOL
CHANNEL VOLUME
(-, +)
(á°,á°)
Buttons
Buttons
ENTER
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
15
PREPARATION
PREPARATION
ᯍ
Image shown may differ from your TV.
47/55LE8500
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
SPEAKER
Touch Button
You can operate the button just by touching the button lightly with your finger.
CH
CHANNEL
(á°,á°)
Buttons
16
VOL
VOLUME
(-, +)
Buttons
ENTER
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
Power/Standby Indicator
(Can be adjusted using the
Power Indicator in the
OPTION menu.Ĺšp.142)
BACK PANEL INFORMATION
Image shown may differ from your TV.
50/60PK750, 50/60PZ550, 50/60PZ750
50/60PK750 50/60PZ550
50/60PZ750
PR
PB
AV IN 1
ANTENNA
/CABLE
IN
AUDIO
VIDEO
AV IN 2
13
VIDEO L(MONO) AUDIO R
/DVI IN
AV IN 2
VIDEO L(MONO) AUDIO R
VIDEO L(MONO) AUDIO R
COMPONENT IN
LAN
VIDEO L(MONO) AUDIO R
REMOTE CONTROL IN
10
WIRELESS
CONTROL
USB IN 2
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
RGB IN (PC)
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
USB IN 1
USB IN 2
USB IN 1
USB IN 2
or
USB IN 1
SERVICE ONLY
DVI IN 4
12
PREPARATION
ᯍ
AV IN 2
32/42/46/52/60LD550, 47/55LD650
AC IN
USB IN 2
12
CABLE MANAGEMENT
RGB IN (PC)
LAN
RGB/DVI OPTICAL DIGITAL
VIDEO L(MONO) AUDIO R
AUDIO IN AUDIO OUT
/DVI IN
PB
PR
AUDIO
VIDEO
AV IN 1 COMPONENT IN
WIRELESS
CONTROL
(SERVICE ONLY)
ęĄ
RS-232C IN
IN 4
ANTENNA/
CABLE IN
VIDEO L/MONO AUDIO R H/P
USB IN 1
10
11
AV IN 2
17
PREPARATION
42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500
PREPARATION
USB IN 2
12
RGB IN (PC)
(CONTROL&SERVICE)
RS-232C IN
COMPONENT IN3
AUDIO / Y PB PR
42/47LE5350
/DVI IN
AUDIO IN
AUDIO OUT
PB
PR
AUDIO
VIDEO
AV IN 1 COMPONENT IN
VIDEO L(MONO) AUDIO R
11
32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500,
47/55LE8500
RS-232C IN
RGB IN (PC)
(SERVICE ONLY)
/DVI IN
LAN
AUDIO OUT
WIRELESS
CONTROL
PB
PR
AUDIO
VIDEO
AV IN 1 COMPONENT IN
VIDEO L(MONO) AUDIO R
ęĄ
CAUTION
For HDMI IN 4 and USB IN 1, 2
ĹšFor an optimal connection,
HDMI cables and USB
devices should have bezels
less than 10 mm (0.39
inches) thick.
(RGB/DVI) OPTICAL DIGITAL
AUDIO IN
ANTENNA/
CABLE IN
*A
42/47/55LX6500
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
ęĄ
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
AUDIO
VIDEO
18
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
AUDIO IN
ANTENNA/
CABLE IN
H/P
(RGB/DVI) OPTICAL DIGITAL
IN 4
LAN
AV IN2
VIDEO / AUDIO
USB IN 1
10
ANTENNA/
CABLE IN
10 mm (0.39 inches)
1
LAN
Network connection for Netflix, Yahoo! TV
Widgets, etc (for USA).
Also used for video, photo and music files on
a local network.
PREPARATION
50/60PZ540
ANTENNA/CABLE IN
Connect over-the-air or cable signals to this
jack.
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
WIRELESS CONTROL
Connect the Wireless Ready Dongle to the TV
to control the external input devices connected to Media Box wirelessly.
10
USB INPUT
Used for viewing photos, watching movies
and listening to MP3s.
11
RS-232C IN (CONTROL & SERVICE),
SERVICE ONLY, or RS-232C IN (SERVICE
ONLY)
Used by third party devices.
This port is used for service or Hotel mode.
HEADPHONE
0.32 cm (1/8 inch) headphone jack
Impedance 16 Ί , Maximum audio out 15 mW
12
OPTICAL DIGITAL AUDIO OUT
Digital optical audio output for use with amps
and home theater systems.
Note: In standby mode, this port doesnât work.
Power Cord or Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC power.
13
REMOTE CONTROL IN
For a wired remote control.
HDMI/DVI IN, HDMI IN
Digital Connection.
Supports HD video and Digital audio. Doesnât
support 480i.
Accepts DVI video using an adapter or HDMI
to DVI cable (not included).
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO IN (RGB/DVI)
0.32 cm (1/8 inch) headphone jack for analog
PC audio input.
AV (Audio/Video) IN
Analog composite connection. Supports
standard definition video only (480i).
19
PREPARATION
STAND INSTRUCTIONS
PREPARATION
(For 50/60PK750, 50/60PZ540, 50/60PZ550, 50/60PZ750)
ᯍ
Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
STAND BODY
M5 x 14
M5 x 14
STAND BASE
STAND BASE
50PK750, 50PZ540, 50PZ550, 50PZ750
(provided as parts of the product)
Assemble the TV as shown.
Install the 4 screws into the holes shown.
60PZ540, 60PZ550, 60PZ750
(provided as parts of the product)
! NOTE
ĹšWhen assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
20
M4 x 26
(50PZ540/550/750)
M4 x 28
(Other models)
PREPARATION
DETACHMENT
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Remove the screws that hold the stand on.
M4 x 28
(50PK750, 60PZ540,
60PZ550, 50/60PZ750)
M4 x 30
(60PK750)
M4 x 26
(50PZ540/550)
Detach the stand from TV.
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
PROTECTION COVER
Fix a guide to the outside.
21
PREPARATION
STAND INSTRUCTIONS (For 32/42/46/52/60LD550, 47/55LD650)
PREPARATION
ᯍ
Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
AC IN
CABLE MANAGEMENT
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
M4 x 20
STAND BASE
AC IN
CABLE MANAGEMENT
Assemble the TV as shown.
Install the 4 screws into the holes shown.
M4 x 20
AC IN
CABLE MANAGEMENT
! NOTE
ĹšWhen assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
22
PREPARATION
DETACHMENT
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Remove the screws that hold the stand on.
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
Detach the stand from TV.
CABLE MANAGEMENT
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
23
PREPARATION
STAND INSTRUCTIONS
PREPARATION
(For 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500,
42/47/55LX6500)
ᯍ
Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
At this time, tighten the screws that hold the
STAND BODY on.
M4 x 20
STAND BODY
M4 x 24
M4 x 26
(47/55LE8500) (55LE5400/5500/7500,
55LX6500, 42LE5350)
M4 x 16
(Other models)
Assemble the TV as shown.
Assemble the part of the STAND
REAR COVER with the TV.
STAND REAR
COVER
Install the 4 screws into the holes shown.
! NOTE
ĹšWhen assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
24
(47LE5350)
M4 x 20
(47/55LE8500)
M4 x 16
(Other models)
STAND BASE
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Remove the screws that hold the stand on.
Detach the STAND REAR COVER from TV.
Detach the stand from TV.
PREPARATION
DETACHMENT
25
PREPARATION
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
Standard
Screw
Quantity
Wall Mounting Bracket
(sold separately)
32LD550,
32LE5400
200 * 100
M4
LSW100B, LSW100BG
42/46LD550,
47LD650,
42/47LE5350,
42/47LE5400,
42/47LE5500,
42/47LE7500,
47LE8500,
42/47LX6500
200 * 200
M6
LSW200B, LSW200BG
52LD550, 55LD650,
55LE5400,
55LE5500,
55LE7500,
55LE8500,
60LD550,
55LX6500
400 * 400
M6
LSW400B, LSW400BG,
DSW400BG
50PK750,
50PZ540
50PZ550,
50PZ750
400 * 400
M6
PSW400B, PSW400BG
60PK750,
60PZ540
60PZ550,
60PZ750
600 * 400
M8
PSW600B, PSW600BG
Model
26
PREPARATION
! NOTE
ĹšScrew length needed depends on the wall
mount used. For further information, refer to
the instructions included with the mount.
ĹšStandard dimensions for wall mount kits are
shown in the table.
ĹšWhen purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
ĹšDo not use screws longer than the standard
dimension, as they may cause damage to the
inside to the TV.
ĹšFor wall mounts that do not comply with the
VESA standard screw specifications, the length
of the screws may differ depending on their
specifications.
ĹšDo not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this
may damage the TV or cause the TV to a fall,
leading to personal injury. LG is not liable for
these kinds of accidents.
ĹšLG is not liable for TV damage or personal
injury when a non-VESA or non specified wall
mount is used or the consumer fails to follow
the TV installation instructions.
CAUTION
ĹšDo not install your wall mount kit while your TV is turned on. It may result in personal injury due to
electric shock.
27
PREPARATION
CABLE MANAGEMENT
PREPARATION
ᯍ
Image shown may differ from your TV.
Plasma TV
After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the
cables.
In case of the LAN cable, install as shown to reduce the electromagnetic wave.
CABLE HOLDER
28
CABLE HOLDER
PREPARATION
ᯍ
Image shown may differ from your TV.
32/42/46/52/60LD550, 47/55LD650
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
AC IN
Open the CABLE MANAGEMENT CLIP as
shown.
AC IN
CABLE MANAGEMENT CLIP
Put the cables inside the CABLE
MANAGEMENT CLIP and snap it closed.
AC IN
29
PREPARATION
PREPARATION
ᯍ
Image shown may differ from your TV.
42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500,
42/47/55LX6500
Secure the power cord with the CABLE
HOLDER on the TV back cover.
It will help prevent the power cable from
being removed by accident.
CABLE HOLDER
After connecting the cables as necessary,
install the CABLE HOLDER as shown
and bundle the cables.
CABLE HOLDER
30
DESKTOP PEDESTAL INSTALLATION
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)
PREPARATION
ᯍ
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
CAUTION
ĹšEnsure adequate ventilation by following the clearance recommendations.
ĹšDo not mount near or above any type of heat source.
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 Âş to suit
your viewing position.
31
PREPARATION
ATTACHING THE TV TO A DESK (For 32/42LD550, 32LE5400)
PREPARATION
ᯍ
Image shown may differ from your TV.
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
Stand
1-Screw
(provided as parts of the product)
Desk
WARNING
ĹšTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
KENSINGTON SECURITY SYSTEM
ᯍ
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security
System cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the userâs guide provided with the Kensington
Security System.
For further information, contact http://www.kensington.com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
32
ᯍ
ᯍ
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children donât climb on or hang from the TV.
ᯍ
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
ᯍ
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
! NOTE
ĹšUse a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
ĹšTo use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.
33
PREPARATION
ᯍ
PREPARATION
ᯍ
To prevent damage do not connect to the power outlet until all connections are made between the
devices.
Image shown may differ from your TV.
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
For optimum picture quality, adjust antenna direction if needed.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA/
CABLE IN
RF Coaxial Wire (75 Ί)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
Be careful not to bend the copper wire
when connecting the antenna.
2. Cable
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 Ί)
ᯍ
ᯍ
34
If the antenna needs to be split for two TVâs, install a 2-Way Signal Splitter.
For much more information about antennas visit our Knowledgebase at http://lgknowledgebase.
com. Search for antenna.
EXTERNAL EQUIPMENT SETUP
ᯍ
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
ᯍ
Image shown may differ from your TV.
HD RECEIVER SETUP
Component Connection
1. How to connect
Connect the video outputs (Y, PB, PR) of the
digital set-top box to the COMPONENT IN
VIDEO 1, 2, or 3* jacks on the TV. Match the
jack colors (Y = green, PB = blue, and PR = red).
Connect the audio output of the digital set-top
box to the COMPONENT IN AUDIO 1, 2, or 3*
jacks on the TV.
PB
PR
RS-232C IN
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
However, if you do receive digital signals from a digital set-top box or other digital external device.
(SERVICE ONLY)
/DVI IN
2. How to use
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
Turn on the digital set-top box.
(Refer to the ownerâs manual for the digital settop box operation.)
VIDEO L(MONO) AUDIO R
PB
PR
Select the Component1, Component2, or
Component3 input source on the TV using the
INPUT button on the remote control.
VIDEO
AUDIO
COMPONENT IN
ᯍ
(RGB/DVI)
AV IN 1
ᯍ
* Component3: For LED LCD TV
Y, CB/PB, CR/PR
Resolution
720x480i
720x480p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
15.73
59.94
15.73
60.00
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
35
COMPONENT IN3
AUDIO / Y PB PR
AV IN2
VIDEO / AUDIO
H/P
USB IN 1
USB IN 2
EXTERNAL EQUIPMENT SETUP
36
IN 4
EXTERNAL EQUIPMENT SETUP
For LED LCD TV
PR
PB
HDMI Connection
(RGB/DVI) OPTICAL DIGITAL
Connect the digital set-top box to HDMI/DVI IN
1, 2, 3, or 4 jack on the TV.
AUDIO IN
ęĄ
(SERVICE
/DVI IN
LAN
RS-232
RGB IN (PC)
No separate audio connection is necessary.
HDMI supports both audio and video.
WIRELESS
CONTROL
ᯍ
Turn on the digital set-top box.
(Refer to the ownerâs manual for the digital settop box.)
ᯍ
Select the HDMI1, HDMI2, HDMI3, or HDMI4 input
source on the TV using the INPUT button on the
remote control.
AUDIO OUT
PB
PR
VIDEO
2. How to use
VIDEO L(MONO
EXTERNAL EQUIPMENT SETUP
1. How to connect
HDMI OUTPUT
! NOTE
ĹšIf an HDMI cable doesnât support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
Ĺš HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1
kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)
HDMI-DTV
Resolution
720x480p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
37
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
LAN
Connect the DVI output of the digital set-top
box to the HDMI/DVI IN 1, 2, 3, or 4* jack on
the TV.
AUDIO IN
ęĄ
WIRELESS
CONTROL
ᯍ
Select the HDMI1, HDMI2, HDMI3, or HDMI4* input
source on the TV using the INPUT button on the
remote control.
! NOTE
ĹšA DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio
connection is necessary.
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
VIDEO
2. How to use
* HDMI4: For Plasma TV
38
(RGB/DVI) OPTICAL DIGITAL
Turn on the digital set-top box.
(Refer to the ownerâs manual for the digital settop box.)
(SERVICE ONLY)
Connect the digital set-top box audio output to
the AUDIO IN (RGB/DVI) jack on the TV.
ᯍ
RS-232C IN
RGB IN (PC)
/DVI IN
DVI OUTPUT
AUDIO
AUDIO
DVD SETUP
Component Connection
Connect the video outputs (Y, PB, PR) of the
DVD to the COMPONENT IN VIDEO 1, 2, or 3*
jacks on the TV.
Match the jack colors (Y = green, PB = blue, and
PR = red).
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO 1, 2, or 3* jacks on the
TV.
PB
RS-232C IN
(SERVICE ONLY)
/DVI IN
AUDIO IN
VIDEO L(MONO) AUDIO R
AUDIO OUT
COMPONENT IN
Turn on the DVD player, insert a DVD.
Select the Component1, Component2, or
Component3 input source on the TV using the
INPUT button on the remote control.
Refer to the DVD playerâs manual for operating
instructions.
PB
PR
AUDIO
VIDEO
AV IN 1
ᯍ
RGB IN (PC)
(RGB/DVI) OPTICAL DIGITAL
ᯍ
2. How to use
ᯍ
PR
EXTERNAL EQUIPMENT SETUP
1. How to connect
* Component3: For LED LCD TV
PB
PR
PB
PR
B-Y
R-Y
Cb
Cr
Pb
Pr
USB IN 1
AV IN2
VIDEO / AUDIO
Video output ports
on DVD player
COMPONENT IN3
AUDIO / Y PB PR
Component ports on
the TV
H/P
To get better picture quality, connect a DVD player
to the component input ports as shown below.
IN 4
Component Input ports
USB IN 2
For LED LCD TV
PR
PB
39
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
RS-232C IN
RGB IN (PC)
(SERVICE ONLY)
/DVI IN
(RGB/DVI) OPTICAL DIGITAL
AUDIO IN
2. How to use
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
AUDIO
VIDEO
ᯍ
ᯍ
ᯍ
Turn on the DVD player, insert a DVD.
Select the AV1 or AV2 input source on the TV
using the INPUT button on the remote control.
Refer to the DVD player's manual for operating
instructions.
COMPONENT IN
Connect the AUDIO/VIDEO jacks between TV
and DVD. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
AV IN 1
EXTERNAL EQUIPMENT SETUP
1. How to connect
VIDEO
AUDIO
IN 4
VIDEO
40
AUDIO
AV IN2
VIDEO / AUDIO
H/P
COMPONENT IN3
AUDIO / Y PB PR
USB IN 1
USB IN 2
For LED LCD TV
HDMI Connection
RS-232C IN
RGB IN (PC)
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1, 2, 3 or 4 jack on the TV.
LAN
AUDIO IN
ęĄ
WIRELESS
CONTROL
AUDIO OUT
PB
2. How to use
ᯍ
PR
VIDEO
ᯍ
VIDEO L(MONO) AUDIO R
Select the HDMI1, HDMI2, HDMI3, or HDMI4 input
source on the TV using the INPUT button on the
remote control.
Refer to the DVD player's manual for operating
instructions.
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
No separate audio connection is necessary.
HDMI supports both audio and video.
(SERVICE ONLY)
/DVI IN
EXTERNAL EQUIPMENT SETUP
1. How to connect
HDMI OUTPUT
! NOTE
ĹšIf an HDMI cable doesnât support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
Ĺš HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1
kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)
41
EXTERNAL EQUIPMENT SETUP
VCR SETUP
Antenna Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the antenna cable to the RF
antenna in socket of the VCR.
ANTENNA/
CABLE IN
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
ᯍ
Set VCR output switch to 3 or 4 and
then tune TV to the same channel number.
Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR ownerâs manual).
AUDIO
Wall Jack
2. How to use
ᯍ
42
Connect the RF antenna out socket
of the VCR to the ANTENNA/CABLE
IN socket on the TV.
Antenna
Composite (RCA) Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
RS-232C IN
RGB IN (PC)
(SERVICE ONLY)
/DVI IN
2. How to use
AUDIO IN
SS
OL
PB
PR
AUDIO
VIDEO
! NOTE
ĹšIf you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the TV.
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
AUDIO
AV IN2
VIDEO / AUDIO
IN 4
H/P
COMPONENT IN3
AUDIO / Y PB PR
USB IN 1
For LED LCD TV
ANT IN
USB IN 2
ᯍ
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR ownerâs manual.)
Select the AV1 or AV2 input source on the TV
using the INPUT button on the remote control.
COMPONENT IN
ᯍ
VIDEO L(MONO) AUDIO R
AUDIO OUT
AV IN 1
(RGB/DVI) OPTICAL DIGITAL
ANT IN
ANT OUT
S-VIDEO VIDEO
AUDIO
OUTPUT
SWITCH
43
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
1. How to connect
Video Game Set
USB IN 2
Connect the AUDIO/VIDEO jacks
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
ᯍ
ᯍ
Select the AV1 or AV2 input source on
the TV using the INPUT button on the
remote control.
Operate the corresponding external
equipment.
IN 4
2. How to use
AV IN 2
44
USB IN 1
VIDEO
VIDEO L(MONO) AUDIO R H/P
EXTERNAL EQUIPMENT SETUP
Camcorder
2. How to use
USB IN 1
After connecting the USB IN jack, you
use the USB function. (Ĺšp.97)
H/P
ᯍ
IN 4
Connect the USB device to the USB
IN 1 or 2 jack on the side of TV.
L(MONO) AUDIO R
or
Memory Key
EXTERNAL EQUIPMENT SETUP
1. How to connect
USB IN 2
USB CONNECTION
45
EXTERNAL EQUIPMENT SETUP
HEADPHONE SETUP (FOR LED LCD TV/LCD TV)
You can listen to the sound through the headphone.
Plug the headphone into the headphone socket.
To adjust the headphone volume,
press the VOL +/- button. If you
press the MUTE button, the sound
from the headphone is switched off.
! NOTE
ĹšAUDIO menu options are disabled when connecting a
headphone.
ĹšWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio.
ĹšOptical Digital Audio Out is not available when connecting a headphone.
46
H/P
EXTERNAL EQUIPMENT SETUP
1. How to connect
AUDIO OUT CONNECTION
1. How to connect
/DVI IN
(RGB/DVI) OPTICAL DIGITAL
Connect one end of the optical cable to the
TV port of OPTICAL DIGITAL AUDIO OUT.
AUDIO IN
Connect the other end of the optical cable to
the digital audio input on the audio equipment.
Set the âTV Speaker option - Offâ in the
AUDIO menu. (Ĺšp.150). See the external audio
equipment instruction manual for operation.
LESS
TROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
VIDEO
AUDIO
AV IN 1 COMPONENT IN
EXTERNAL EQUIPMENT SETUP
Send the TVâs audio to external audio equipment via the Audio Output port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
! NOTE
ĹšWhen connecting with external audio equipment, such
as amplifiers or speakers, you can turn the TV speakers
off in the menu. (Ĺšp.150)
CAUTION
ĹšDo not look into the optical output port. Looking at
the laser beam may damage your vision.
ĹšAudio with ACP (Audio Copy Protection) function may
block digital audio output.
47
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT WIRELESS CONNECTION
(OPTIONAL EXTRAS, EXCEPT 42/42LE5350)
EXTERNAL EQUIPMENT SETUP
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately.
When you connect the wireless ready dongle (included with the media box) to the TV, external devices
can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
WIRELESS
CONTROL
OUT
RS-232C IN
RGB IN (PC)
(SERVICE ONLY)
/DVI IN
LAN
AUDIO IN
ęĄ
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
VIDEO
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
1. How to connect
Connect the WIRELESS CONTROL jack of the Wireless Ready Dongle to the WIRELESS
CONTROL jack on the TV.
Connect HDMI OUT jack of the Wireless Ready Dongle to the HDMI IN jack on the TV.
2. How to use
ᯍ
ᯍ
Select the desired input source on the TV using the INPUT button on the remote control.
Refer to the Wireless Media Box manual for operating instructions.
! NOTE
ĹšWhen using the external device connected to the Wireless Media Box, some functions of the TV
menu may not work.
48
PC SETUP
This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV's settings.
RS-232C IN
RGB IN (PC)
1. How to connect
LAN
Connect the VGA output of the PC to the
RGB IN (PC) jack on the TV.
ęĄ
IRELESS
ONTROL
AUDIO IN
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
Connect PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
VIDEO
2. How to use
ᯍ
ᯍ
AUDIO
RGB OUTPUT
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
(SERVICE ONLY)
/DVI IN
EXTERNAL EQUIPMENT SETUP
VGA (D-Sub 15 Pin) Connection
Turn on the PC and the TV.
Select the RGB-PC input source on the TV using
the INPUT button on the remote control.
49
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
LAN
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
ᯍ
ᯍ
(RGB/DVI) OPTICAL DIGITAL
AUDIO IN
WIRELESS
CONTROL
VIDEO L(MONO) AU
AUDIO OUT
PB
PR
VIDEO
Turn on the PC and the TV.
Select the HDMI1, HDMI2, HDMI3, or HDMI4* input
source on the TV using the INPUT button on the
remote control.
* HDMI4: For Plasma TV
DVI OUTPUT
50
(SERVICE ONL
Connect the DVI output of the PC to the HDMI/
DVI IN 1, 2, 3, or 4* jack on the TV.
ęĄ
RS-232C I
RGB IN (PC)
/DVI IN
AUDIO
AUDI
! NOTE
ĹšDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
ĹšIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
ĹšAvoid keeping a fixed image on the screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
ĹšThe synchronization input form for Horizontal and Vertical frequencies is separate.
ĹšDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
ĹšIf you experience overscan issues when using HDMI-PC 1920x1080, change aspect ratio to Just
scan.
EXTERNAL EQUIPMENT SETUP
ĹšTo get the the best picture quality, adjust the PC graphics card to 1920x1080.
ĹšWhen selecting HDMI-PC, set the âInput Label - PCâ in the OPTION menu.
Supported Display Specifications (RGB-PC, HDMI-PC)
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x768
47.776
59.87
1360x768
47.712
60.015
1280x1024
63.981
60.02
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.50
60.00
51
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
You can choose the resolution in RGB-PC mode.
The Position, Phase, and Size can also be adjusted.
You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
3,&785(
áŻ0RYHáŻ(QWHU
6&5((1
5HVROXWLRQ
Ř&RORU
Ř7LQW
Ř&RORU7HPS
Ř$GYDQFHG&RQWURO
Ř3LFWXUH5HVHW
3RVLWLRQ
6L]H
Ř 7UX0RWLRQ
Ř 6FUHHQ 5*%3&
$XWR&RQILJ
áŻ
áŻ
Ř /('/RFDO'LPPLQJ 2Q
Phase
Reset
52
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Resolution.
ENTER
Select the desired resolution.
ENTER
áŻ0RYHá°3UHY
ᯥ[
Űł[
Űł[
Auto Configure
Screen Reset (Reset to original initial values)
Returns Position, Size, and Phase to the default initial settings.
This feature operates only in RGB-PC mode.
3,&785(
áŻ0RYHáŻ(QWHU
Ř&RORU
Ř7LQW
Ř&RORU7HPS
Ř$GYDQFHG&RQWURO
Ř3LFWXUH5HVHW
áŻ
áŻ
Ř /('/RFDO'LPPLQJ 2Q
áŻ0RYHá°3UHY
5HVROXWLRQ
$XWR&RQILJ
$XWR&RQILJ
6L]H
$XWR&RQILJ
Yes
Reset
Reset
ᯍ
ENTER
Select Screen (RGB-PC).
ENTER
Select Auto Config. or
Reset.
ENTER
Select Yes.
6L]H
Phase
Select PICTURE.
áŻ0RYHá°3UHY
3RVLWLRQ
1R
Phase
ᯍ
MENU
6&5((1
5HVROXWLRQ
3RVLWLRQ
Ř 7UX0RWLRQ
Ř 6FUHHQ 5*%3&
6&5((1
EXTERNAL EQUIPMENT SETUP
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
7R6HW
Yes
1R
If the position of the image is still not
correct, try Auto adjustment again.
If picture needs to be adjusted again
after Auto adjustment in RGB-PC,
you can adjust the Position, Size or
Phase.
ENTER
53
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, and Phase
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.
This feature operates only in RGB-PC mode.
3,&785(
áŻ0RYHáŻ(QWHU
6&5((1
5HVROXWLRQ
Ř&RORU
Ř7LQW
Ř&RORU7HPS
Ř$GYDQFHG&RQWURO
Ř3LFWXUH5HVHW
âŤŰťâŹ
$XWR&RQILJ
3RVLWLRQ
Ř 7UX0RWLRQ
Ř 6FUHHQ 5*%3&
áŻ0RYHá°3UHY
âŤÜâŹ
âŤŰ˝âŹ
6L]H
áŻ
áŻ
âŤŰżâŹ
Phase
Ř /('/RFDO'LPPLQJ 2Q
Reset
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Position, Size, or Phase.
ᯍ
ᯍ
ᯍ
54
ENTER
ENTER
Make appropriate adjustments.
Position: This function is to adjust
picture to left/right and up/down as
you prefer.
Size: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
Phase: This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
NETWORK SETUP
Wired Network Connection
RS-232C IN
RGB IN (PC)
(SERVICE ONLY)
/DVI IN
LAN
ęĄ
WIRELESS
CONTROL
AUDIO IN
VIDEO L(MONO) AUDIO R
AUDIO OUT
PB
PR
VIDEO
Broadband modem
Broadband Service
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
EXTERNAL EQUIPMENT SETUP
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical
connection, the TV needs to be set up for network communication.
Router
Broadband modem
Broadband Service
1. How to connect
Connect the LAN port of the Modem or Router to the LAN port on the TV.
2. How to use
ᯍ
ᯍ
ᯍ
Select âNetwork Settingâ in the NETWORK menu.
After connecting the LAN port, use the NETCAST menu.
For more information about NETCAST setup and troubleshooting, visit http://lgknowledgebase.
com. Search for NETCAST.
CAUTION
ĹšDo not connect a modular phone cable to the LAN port.
ĹšSince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.
55
EXTERNAL EQUIPMENT SETUP
Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
EXTERNAL EQUIPMENT SETUP
If you already set the
Network Setting
1(7:25.
áŻ0RYHáŻ(QWHU
:LUHG
Ř 1HWZRUN6WDWXV
:LUHGQHWZRUNLVUHFRPPHQGHG
,QWHUQHWLVFRQQHFWHG
:LUHG
Ř /HJDO1RWLFH
3UHYLRXVVHWWLQJYDOXHH[LVWV'R
\RXZDQWWRFRQQHFWZLWKWKH
SUHYLRXVVHWWLQJ"
1HWZRUN7\SH
Ř 1HWZRUN6HWWLQJ
Ř (61
(QWHU
:LUHOHVV
5HVHWWLQJ
áŻ1H[W
Appeared when wired and
wireless are simultaneously
connected.
IP Auto Setting
1HWZRUN6HWWLQJ
á°ż([LW
IP Manual Setting
1HWZRUN6HWWLQJ
1HWZRUN6WDWXV
79
1HWZRUNFRQQHFWLQJ
6HOHFWWKH,3VHWWLQJPRGH
,QVHUWWKH,3DGGUHVV
,30RGH
,30RGH
âŤÜâŹ,3$XWR6HWWLQJâŤŰ˝âŹ
áŻ,3$GGUHVV
áŻ6XEQHW0DVN
áŻ6XEQHW0DVN
áŻ*DWHZD\
áŻ*DWHZD\
áŻ'166HUYHU
áŻ'166HUYHU
(QWHU
6HWWLQJ
7HVW
MENU
Select NETWORK.
á°ż([LW
ᯍ
ᯍ
ENTER
Select Network Setting.
ENTER
Select Wired.
ENTER
If you already set Network Setting:
Select Resetting. The new connection
settings resets the current network
settings.
ENTER
Select IP Auto Setting or IP Manual
Setting.
ᯍ
ᯍ
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
When Selecting IP Manual Setting:
IP addresses will need to be input
manually.
ENTER
56
Select Enter.
(QWHU
&ORVH
á°3UHYLRXV
âŤÜâŹ,30DQXDO6HWWLQJâŤŰ˝âŹ
áŻ,3$GGUHVV
ᯍ
ᯍ
á°3UHYLRXV
á°ż([LW
This feature requires an always-on
broadband internet connection.
You do not need to connect to a PC
to use this function.
If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
If the Network Setting is not completed, network may not operate normally.
IP Auto Setting: Select it if there is a
DHCP server on the local area network (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If youâre using a broadband router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server function. The IP address will automatically be determined.
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manually.
! NOTE
ĹšThe use of a âRouterâ may not be allowed or
its usage may be limited depending on the
policies and restrictions of your ISP. For details,
contact your ISP directly.
ĹšThe wireless network operates at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone, BluetoothÂŽ devices, microwave oven,
and can be affected by interference from
them. It can be interrupted by the device
using 5Ghz radio frequencies. It is same
device with LG wireless media box, cordless
telephone, other Wi-Fi device.
ĹšIt may decrease the service speed using
Wireless network by surrounding wireless condition.
ĹšTurn off all unused network equipment in your
local home network. Some devices may generate network traffic.
ĹšIn some instances, placing the access point or
wireless router higher up away from the floor
may improve the reception.
ĹšThe reception quality over wireless depends
on many factors such as type of the access
point, distance between the TV and access
point, and the location of the TV.
ĹšWhen connecting internet through the wired/
wireless sharing machine, it may interrupt the
connection because of the use limitation and
confirmation of service company.
ĹšTo connect wireless AP, an AP that supports
the wireless connection is necessary, and the
wireless connection function of the AP needs
to be activated. Please enquire to the AP supplier for the possibility of AP wireless connections.
ĹšPlease verify the security settings of AP SSID
for wireless AP connection, and enquire to the
AP supplier for the AP SSID security settings.
ĹšThe TV can become slower or malfunction
with wrong settings of network equipments
(wired/wireless router, hub, etc). Please install
correctly by referring to the manual of the
equipment, and set the network.
Ĺš When AP is set to include 802.11 n, and if
Encryption is designated as WEP(64/128bit)
or WPA(TKIP/AES), the connection may not
be possible. There may be different connection methods according to the AP manufacturers.
EXTERNAL EQUIPMENT SETUP
Ĺš For more information about NETCAST setup
and troubleshooting, visit http://lgknowledgebase.com. Search for NETCAST.
ĹšUse a standard LAN cable with this TV. Cat5
or better with a RJ45 connector.
ĹšMany network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the player to the
home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
ĹšDepending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact
your ISP.
ĹšLG is not responsible for any malfunction of
the TV and/or the internet connection feature
due to communication errors/malfunctions
associated with your broadband internet connection, or other connected equipment.
ĹšLG is not responsible for problems within your
internet connection.
ĹšSome content available through the network
connection may not be compatible with the
TV. If you have questions about such content,
please contact the producer of the content.
ĹšYou may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
ĹšSome internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
ĹšAny fees charged by an ISP including, without
limitation, connection charges are your responsibility.
ĹšA 10 Base-T or 100 Base-TX LAN port is
required for connection to this TV. If your internet service does not allow for such a connection, you will not be able to connect the TV.
ĹšA DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the internet connection feature contained in this TV or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits subscription to one device, this TV may
not be allowed to connect when a PC is
already connected.)
57
EXTERNAL EQUIPMENT SETUP
Wireless Network Connection (Except 42/47LE5350)
USB IN 2
USB IN 1
IN 4
VIDEO L(MONO) AUDIO R H/P
EXTERNAL EQUIPMENT SETUP
The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect
to a wireless lan network.
The network configuration and connection method may vary depending on the equipment in use and
the network environment. Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
AV IN 2
1. How to connect
Connect the âLG Wireless LAN for Broadband/DLNA Adaptor (sold separately)â to the USB
IN 1 or 2 port on the TV.
2. How to use
ᯍ
ᯍ
Select âNetwork Settingâ in the NETWORK menu.
After connecting, you can use the NETCAST menu.
! NOTE
ĹšFor enjoying pictures, music, or video stored in the PC using the router, the use of wired port in
the router is recommended.
ĹšWhen the wireless port of the router is used, there may be restrictions for some functions.
58
Wireless Network Setup (Except 42/47LE5350)
Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the
network.
áŻ0RYHáŻ(QWHU
Ř 1HWZRUN6HWWLQJ
:LUHG
Ř 1HWZRUN6WDWXV
,QWHUQHWLVFRQQHFWHG
1HWZRUN7\SH
:LUHGQHWZRUNLVUHFRPPHQGHG
Ř /HJDO1RWLFH
Ř (61
6HOHFWLQJWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
3UHYLRXVVHWWLQJYDOXHH[LVWV'R
\RXZDQWWRFRQQHFWZLWKWKH
SUHYLRXVVHWWLQJ"
:LUHG
(QWHU
:LUHOHVV
5HVHWWLQJ
6HOHFWWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
6HWWLQJIURPWKH$3OLVW
6LPSOHVHWWLQJ :36EXWWRQPRGH
6HWWLQJ$GKRFQHWZRUN
áŻ1H[W
áŻ1H[W
á°ż([LW
á°3UHYLRXV
á°ż([LW
Appeared when wired and wireless
are simultaneously connected.
If your AP is locked
1HWZRUN6HWWLQJ
,30RGH
6HOHFWLQJ$3
6HOHFW$3\RXZDQWWRFRQQHFW
,QVHUWLQJWKHVHFXULW\NH\
6HOHFWWKH,3VHWWLQJPRGH
âŤÜâŹ,3$XWR6HWWLQJâŤŰ˝âŹ
PDJH1/1
,QVHUWWKHVHFXULW\NH\RI$3
,QSXWWKHQHZ66,'
,QVHUWa$6&,,FKDUDFWHUV
áŻ,3$GGUHVV
áŻ6XEQHW0DVN
áŻ*DWHZD\
áŻ'166HUYHU
EXTERNAL EQUIPMENT SETUP
1(7:25.
If you already set the
Network Setting
âŤÜâŹ
âŤŰ˝âŹ
LSWLPH
ASW
1HWZRUN
$FFHVV3RLQW
6HDUFK
áŻ&RQQHFWLQJZLWK3,1PRGH
(QWHU
á°3UHYLRXV
(QWHU
á°ż([LW
&DQFHO
áŻ1H[W
á°3UHY
MENU
Select NETWORK.
ENTER
Select Network Setting.
á°3UHYLRXV
á°ż([LW
ENTER
Scan the all available AP (Access
Point) or wireless routers within range
and display them as a list.
ENTER
Select an AP (Access Point) or
wireless router on the list.
(If your AP is locked, insert the
security key of AP).
ENTER
Input the security key of AP.
ENTER
Select Wireless.
ENTER
If you already set Network
Setting: Select Resetting.
The new connection settings
resets the current network settings.
á°ż([LW
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Repeat step 4-5 on P.56.
ENTER
Select Setting from the AP list.
59
EXTERNAL EQUIPMENT SETUP
When a security code is already set
PIN (Personal Identification Number)
EXTERNAL EQUIPMENT SETUP
If you want to connect the AP (Access Point) or router with PIN, use this feature.
6HOHFWLQJ$3
&RQQHFWLQJZLWK3,1PRGH
6HOHFW$3\RXZDQWWRFRQQHFW
PDJH1/1
,QVHUW3,1QXPEHUDWWKH$3ZHESDJHDQG
SUHVVŘ&RQQHFWŘEXWWRQ
,QSXWWKHQHZ66,'
3,118%0(5
LSWLPH
&RQQHFW
ASW
$FFHVV3RLQW
6HDUFK
1HWZRUN
)RUPRUHLQIRUPDWLRQFKHFNWKH$3PDQXDO
áŻ1H[W
áŻ&RQQHFWLQJZLWK3,1PRGH
á°3UHYLRXV
á°ż([LW
áŻ1H[W
á°3UHYLRXV
á°ż([LW
Repeat step 1-6 on P.59.
RED
Connect the acccess point with PIN
mode.
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
ᯍ
ENTER
Select Connect.
Repeat step 4-5 on P.56.
PIN number is the unique 8 digit number
of the dongle.
Simple setting (WPS-button mode)
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), itâs available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
6HOHFWWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
6HOHFWWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
6LPSOHVHWWLQJ :36EXWWRQPRGH
3UHVV3%&0RGHEXWWRQRI$3DQGSUHVVŘ&RQQHFWŘEXWWRQ
6HWWLQJIURPWKH$3OLVW
&RQQHFW
6LPSOHVHWWLQJ :36EXWWRQPRGH
&DXWLRQ &KHFNLI3%&PRGHEXWWRQLVDYDLODEOHIRU\RXU$3
6HWWLQJ$GKRFQHWZRUN
áŻ1H[W
áŻ1H[W
á°3UHYLRXV
á°3UHYLRXV
Repeat step 1-4 on P.59.
ENTER
60
á°ż([LW
Select Simple setting (WPSbutton mode).
á°ż([LW
ENTER
Select Connect.
Repeat step 4-5 on P.56.
AD-hoc Mode
This is the method of communicating directly with the machine to communicate without AP.
This is the same as connecting two PCs with a cross cable.
6HWWLQJ$GKRFQHWZRUN
6HWWLQJ$GKRFQHWZRUN
6HOHFWWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
,QVHUWWKHVHWWLQJLQIRUPDWLRQLQWRWKHGHYLFH
)HDWXUHVXVLQJH[LWLQJQHWZRUNFDQEHXQDYDLODEOH'R\RX
6HWWLQJIURPWKH$3OLVW
1HWZRUN,' 66,' /*79
ZDQWWRFKDQJHQHWZRUNFRQQHFWLRQ"
6HFXULW\.H\
6LPSOHVHWWLQJ :36EXWWRQPRGH
(QWHU
6HWWLQJ$GKRFQHWZRUN
&DQFHO
á°3UHYLRXV
áŻ&KDQJLQJWKHVHWWLQJLQIRUPDWLRQ
áŻ1H[W
áŻ1H[W
&RQQHFW
á°3UHYLRXV
á°ż([LW
á°3UHYLRXV
79
,30RGH
6LJQDO6WUHQJWK
*DWHZD\
6HWWLQJ
0DF$GGUHVV
,3$GGUHVV
6XEQHW0DVN
*DWHZD\
7HVW
,QVHUWWKHVHWWLQJLQIRUPDWLRQLQWRWKHGHYLFH
,QVHUWWKH,3DGGUHVV
$GKRFQHWZRUNLVFRQQHFWHG
/*79
1HWZRUN,' 66,' /*79
,30DQXDO6HWWLQJ
áŻ,3$GGUHVV
áŻ6XEQHW0DVN
áŻ*DWHZD\
áŻ'166HUYHU
6HFXULW\.H\
&RQQHFWLQJWKH$GKRFQHWZRUN
&DQFHO
(QWHU
&ORVH
á°ż([LW
ᯍ
PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.10
ᯍ
TV Setting
Verify IP address and gateway of PC.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select Enter.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.1
Repeat step 1-3 on P.59.
ENTER
Select Setting AD-hoc network.
ENTER
ENTER
ENTER
Example of the PC setting that
supports a wireless network
1. Find a wireless network device in
your PC.
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the security key that
appears on your TV screen.)
ᯍ
á°3UHYLRXV
á°ż([LW
6HWWLQJ$GKRFQHWZRUN
1HWZRUN6HWWLQJ
1HWZRUN6WDWXV
áŻ1H[W
á°ż([LW
EXTERNAL EQUIPMENT SETUP
6HOHFWLQJWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
ENTER
Insert the IP address.
ENTER
Network setting is completed.
Select Close.
Select Enter.
Select Connect to connect Ad-hoc
network.
You can see the Network ID and
Security Key on your TV screen.
Enter this Network ID and Security
Key to your device.
If a network may not operate,
change the setting information
using the RED button.
61
EXTERNAL EQUIPMENT SETUP
Network Status
EXTERNAL EQUIPMENT SETUP
1HWZRUN6WDWXV
1(7:25.
áŻ0RYHáŻ(QWHU
79
Ř 1HWZRUN6HWWLQJ
:LUHG
Ř 1HWZRUN6WDWXV
,QWHUQHWLVFRQQHFWHG
1HWZRUNFRQQHFWLQJ
Ř /HJDO1RWLFH
Ř (61
6HWWLQJ
7HVW
&ORVH
6HOHFWWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
1HWZRUN6HWWLQJ
6HOHFWWKHZLUHOHVVQHWZRUNVHWWLQJW\SH
6HOHFWWKH,3VHWWLQJPRGH
,30RGH
âŤÜâŹ,3$XWR6HWWLQJâŤŰ˝âŹ
áŻ,3$GGUHVV
áŻ6XEQHW0DVN
áŻ*DWHZD\
áŻ'166HUYHU
6HWWLQJ$GKRFQHWZRUN
áŻ1H[W
á°3UHYLRXV
á°ż([LW
Wireless Connection
(QWHU
á°3UHYLRXV
6HWWLQJIURPWKH$3OLVW
6LPSOHVHWWLQJ :36EXWWRQPRGH
á°ż([LW
Wired Connection
MENU
Select NETWORK.
ENTER
Select Network Status.
ᯍ
ᯍ
ᯍ
62
ENTER
Check the newtwork status.
Setting: Return to the network setting menu or wireless network setting
type menu.
Test: Test the current network status
after setting the network.
Close: Return to the previous menu.
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
The remote control may differ from the images below.
Turns the TV on from standby or off to
standby.
LIGHT
Illuminates the remote control buttons.
(Except 32/42/46/52/60LD550,
47/55LD650)
ENERGY SAVING
Adjusts the Energy Saving setting.
AV MODE
ENERGY AV MODE INPUT
TV
SAVING
INPUT
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
TV
7PQRS 8 TUV 9 WXYZ
LIST
RATIO
DELETE
â (DASH)
CH
MUTE
MENU
Rotates through inputs.
Also switches the TV on from standby.
Returns to the last TV channel.
ENERGY AV MODE INPUT
TV
SAVING
Q.MENU
LIST
FLASHBK
VOLUME UP/
DOWN
FAV
7PQRS 8 TUV 9 WXYZ
Used to enter a program number for
multiple program channels such as 2-1,
2-2, etc.
Displays the channel table.
VOL
3D
DELETE
CH
MUTE
Q.MENU
Set up desired favorite channels list.
Changes the aspect ratio.
DELETE
MARK
CHAR/NUM
Adjusts the volume.
RATIO
MUTE
FLASHBK
Tunes to the last channel viewed.
Select the input to apply the Picture
Wizard settings. Ĺšp.131
Use to mark or unmark a photo/music/
movie. Ĺšp.105, 110, 116
CHAR/NUM
FAV
MENU
MARK
3D
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
LIST
FAV
VOL
Toggles through preset Video and
Audio modes. Ĺšp.88
NUMBER button
FLASHBK
MARK
CHAR/NUM
LIGHT
Ĺšp.132
WATCHING TV / CHANNEL CONTROL
LIGHT
POWER
Ĺšp.128
Used for viewing the 3D video.
Ĺšp.94
Shifts the Character or Number for
internet service.
Switches the sound on or off.
Deleted the character or number on the
screen.
CHANNEL
UP/DOWN
Changes the channel.
PAGE
UP/DOWN
Moves from one full set of screen information to the next one.
63
WATCHING TV / CHANNEL CONTROL
DELETE
MUTE
MUTE
MENU
MENU, HOME
Displays the main menu or clears all
on-screen displays and return to TV
viewing.
NETCAST,
PREMIUM
Select the desired NETCAST menu
source. Ĺšp.123
Q.MENU
Opens the list of Quick Menu options.
Q.MENU
ENTER
BACK WIDGETS EXIT
MENU
Q.MENU
ENTER
BACK WIDGETS EXIT
L/R SELECT
Ĺšp.71
WATCHING TV / CHANNEL CONTROL
FREEZE
MUTE
MENU
Q.MENU
THUMBSTICK
(Up/Down/Left
Right/ENTER)
BACK
ENTER
WIDGETS
BACK INFO
EXIT
FREEZE
MUTE
PREMIUM
HOME
INFO
Navigates the on-screen menus and
adjusts the system settings to your
preference.
MENU
Allows the user to move return one step
in an interactive application or other
user interaction function.
WIDGETS for showing or hiding the
Yahoo! Dock and accessing the Yahoo!
TV Widgets user experience.
Clears all on-screen displays and return
to TV viewing.
COLOR
BUTTON
Access special functions in some
menus.
Q.MENU
ENTER
BACK INFO
EXIT
L/R SELECT
Displays channel information at the
bottom of the screen. Ĺšp.81
EXIT
WIDGETS
MUTE
MUTE
PREMIUM
HOME
Q.MENU
ENTER
ENTER
BACK Q.MENU EXIT
L/R SELECT,
3D SETTING
Used for viewing the 3D video.
BACK INFO
Ĺšp.95
EXIT
3D SETTING
3D SETTING
FREEZE
FREEZE
USB,
SIMPLINK
Control buttons
ĹŁ Controls MY MEDIA menu (Movie List,
Photo List, Music List)
ĹŁ Controls the SIMPLINK compatible
devices.
FREEZE
Pause the present picture at the screen.
(It doesnât work at USB Mode and
Simplink.)
The TV returns to normal viewing automatically if no signal is received or no
operation is performed for 5 minutes.
If you keep the screen in Freeze condition, the residual image can exist.
FREEZE
(For Plasma TV)
INFO
FREEZE
SIMPLINK
See a list of AV devices connected to
TV.
When you toggle this button, the
SIMPLINK menu appears at the screen.
Ĺšp.90
RATIO
64
Changes the aspect ratio.
Ĺšp.128
L/R SELECT
INFO
RATIO
L/R SELECT
RATIO
Simple Remote Control (For 42/47/55LE7500, 47/55LE8500)
POWER
VOL
TV/INPUT
CH
TV/INPUT
VOLUME UP/
DOWN
MUTE
CHANNEL
UP/DOWN
Rotates through inputs.
Also switches the TV on from standby.
Ĺšp.83
Adjusts the volume.
Switches the sound on or off.
Ĺšp.66
Changes the channel.
NUMBER button
FLASHBK
â (DASH)
Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
FLASHBK
Tunes to the last channel viewed.
WATCHING TV / CHANNEL CONTROL
POWER
Turns the TV on from standby or off to standby.
Installing Batteries
ᯍ
ᯍ
ᯍ
Open the battery compartment cover
on the back side and install the batteries matching correct polarity.
Install two 1.5V AAA batteries. Donât
mix old or used batteries with new
ones.
Close cover.
Installing Batteries
ᯍ
ᯍ
ᯍ
Open the battery compartment cover
on the back side and install the batteries matching correct polarity.
Install two 1.5V AAA batteries. Donât
mix old or used batteries with new
ones.
Close cover.
65
WATCHING TV / CHANNEL CONTROL
TURNING ON THE TV
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
ᯍ
In standby mode to turn TV on, press the / I, INPUT, CH (á°or á°) button on the TV or press
the , INPUT, CH (á°or á°), Number (0-9) button on the remote control.
WATCHING TV / CHANNEL CONTROL
Select the viewing source by using the INPUT button on the remote control.
When finished using the TV, press the POWER button on the remote control. The TV reverts
to standby mode.
! NOTE
Ĺš If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Ĺš If you do not complete the Initial setting, it will appear whenever the TV is switched on until the
Initial setting procedure is completed.
CHANNEL SELECTION
Press the CH (á°or á°) or NUMBER buttons to select a channel number.
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
66
Press the VOL (+ or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
INITIAL SETTING
This Function guides the user to easily set the essential items for viewing the TV for the first time
when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It
can also be activated from the user menus.
ᯍ
ᯍ
Step 1. Selecting Language
:(/&20(
Select Menu Language.
7KDQN\RXIRUFKRRVLQJ/*
6WHS/DQJXDJH
(QJOLVK
ENTER
WATCHING TV / CHANNEL CONTROL
ᯍ
Default selection is âHome Useâ. We recommend setting the TV to âHome Useâ mode for the best
picture in your home environment.
âStore Demoâ Mode is only intended for use in retail environments. Customers can adjust the
âPicture menu - Picture modeâ manually while inspecting the TV, but the TV will automatically
return to preset in-store mode after 5 minutes.
âStore Demoâ Mode is an optimal setting for displaying at stores. âStore Demoâ mode initializes
the TV to set the image quality.
(VSDĂąol
)UDQÂŤDLV
ä˘â´ăŽť
áŻ1H[W
Step 2. Mode setting
6WHS0RGH6HWWLQJ
L 6HOHFWLQJWKHHQYLURQPHQW
&KRRVHWKHVHWWLQJPRGH\RXZDQW
6HOHFW>+RPH8VH@ZKHQVHWWLQJ79XS
LQKRPH
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : No
XMP Toolkit : 3.1-702
Modify Date : 2010:11:02 20:33:24+09:00
Create Date : 2010:10:19 10:14:38+09:00
Metadata Date : 2010:11:02 20:33:24+09:00
Creator Tool : PScript5.dll Version 5.2
Format : application/pdf
Title : PZ5_7_1007.pdf
Creator : User
Document ID : uuid:c930a6f4-88b3-4814-8ac0-77245a743c8b
Instance ID : uuid:ada46ce3-64ff-430a-981a-26d42cb497db
Producer : Acrobat Distiller 7.0.5 (Windows)
Has XFA : No
Page Count : 68
Author : User
EXIF Metadata provided by EXIF.tools