LG Electronics USA L06A PCS GSM Phone User Manual L 03A English Cover 1 0
LG Electronics USA PCS GSM Phone L 03A English Cover 1 0
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
Users Manual 3
Inbox/Outbox/Unsent message Displaying Mail in Inbox/ Outbox or Unsent Messages a folder 2 ・Select I[Reply]: Reply to the sender and/or multiple recipients. →P144 ・ To display contents of a folder with security set, enter the Terminal Security code. Displaying Received Mail ・ Up to 1000 incoming i-mode mail and SMS messages can be saved in the Inbox. However, the savable number depends on the amount of the data. ・ By default, "♪Welcome mail♪" mail is saved. This mail does not include any charge. ・It is not possible to send e-mail back to "♪Welcome mail♪". Received mail list screen a message 3 ・Select J:Open the previous or next mail. ・ I[Reply]: Reply to the sender and/or multiple recipients. →P144 The Stand-by display ] g ] "Inbox" Received mail Inbox list screen 148 Mail a message 3 ・Select J:Open the previous or next mail. Displaying Sent Mail ・ Up to 500 i-mode mail, SMS, and unsent messages can be saved in the Outbox. However, the savable number depends on the amount of the data. ・ I[ReEdit]: Open the Compose message or SMS screen.→P131, P168 The Stand-by display ] g ] "Outbox" Sent mail details screen Displaying Unsent Messages Outbox list screen ・ Messages saved as Unsent message are included in the maximum number of savable messages in the Outbox. Stand-by display ] g ] "Unsent message" 1 ・The I[Delete]: Delete i-mode mail or SMS. Select a folder Sent mail list screen Unsent message screen Select a message 2 The Compose i-mode mail or SMS screen opens depending on the type of the selected mail, and the unsent mail can be edited. Mail 149 Auto sort Sorting Sent/Received Mail Automatically to Folders Set conditions for automatically saving mail in specified folders. ・ This option is not available with the default "Inbox" and "Outbox". ・ I[Phonebook]: Select and set sort to mail addresses from the Phonebook. [Release] Select a view to display the condition of "Auto sort" setting. Release one:Delete the selected Auto sort condition. Release sel:Select and delete the auto-sort condition. ] Place check marks next to the conditions to be deleted ] I"Done" ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Release all:Delete all conditions set to the selected folder. M[Menu] ] Perform the following operations: * This icon is not displayed for the sent mail. Received mail folder list screen(P148)/Sent mail folder list screen (P149) ] Move a cursor to a folder ] M[Menu] ] "Auto sort" [Address] Set mail address as a sorting condition. You can specify more than one mail address. Sent address:Select an address from the sent mail logs. Rcv. address:Select an address from the received mail logs. Open phonebook:Select and set sort to addresses from the Phonebook. Direct address:Directly enter and set a mail address. [Subject] Set a mail subject as a condition. [Reply invalid]* Route messages with Reply impossible to the selected folder. 150 Mail [Switch view] Select a view to display the condition of "Auto sort" setting. Name:Display the name saved in the Phonebook. Address:Display the mail address. Note ・ You cannot set multiple conditions such as "Address", "Subject", and "Reply impossible" to the same folder concurrently. ・ The same sorting conditions as ones set to another folder cannot be set. ・ If set to sorting mail address, set domain name (including after @). For example, when set from Outbox address list or Inbox address list, if receiving or sending mail using only the phone number, the domain name is not included. For this condition, sorting will not be recognized. Received mail list screen/Received mail detail Received/Sent/Unsent Mail Screen Components Received/Sent Mail Folder List Screen Received mail list screen Example: Inbox list screen 1 Folder name 2 Number of unread messages This is displayed on the Inbox list screen. ■ Icons displayed on the Inbox/Outbox screen Icon (Gray) (Blue) Description "Inbox"/"Outbox" (Default folders) User defined folder Auto sort Security is set Unread mail Received mail detail screen 1 Displayed folder name 2 Received date and time On the Received mail list screen, messages received before today have the date displayed, and messages received today have the time displayed. 3 Sender's phone number/mail address If the phone number or mail address is saved in the Phonebook, the name in the Phonebook appears.* * When the name is set to appear in "Switch view" → P155 4 Subject "SMS" is displayed for an SMS message. 5 Address types and multiple recipients If you send mail to multiple recipients, their address types (To or Cc) are displayed. If the mail address is saved in the Phonebook, the name in the Phonebook appears. Mail 151 ■ Icons displayed on the Received mail list screen/ Received mail detail screen Icon Icon ) (Gray) Deleted attachment (Example. For a still image) ) (Blue) Attached file un-retrieved or failed to be retrieved (Example: For a still image) ) (Blue) Attached file partially retrieved (Example: For a still image) Attached file set with UIM restriction function Description Unread i-mode mail/SMS/SMS report request Read i-mode mail/SMS/SMS report request Replied Forwarded Invalid multiple recipient addresses to which the reply cannot be sent Unread/read SMS saved in the UIM Received date and time The received date and time of SMS is not in Japan time A melody is attached. The i-αppli can be started from the message text. / / / / / / ( / / / / / / ) Melody/Still Image/Video/Phonebook entry/ Schedule event/Bookmark/other file is attached. Files of multiple types attached Multiple files of the same type attached Damaged file 152 Mail Subject Sender mail address to which the reply cannot be sent Protected. Description The message was sent with the address as To, Cc, or Bcc Multiple recipient address types other than own address (To/Cc) * Different icons indicated with ( ) appear on a detail screen. ■ Icons displayed on the Outbox list screen/Outbox detail screen Outbox list screen/Outbox detail screen Icon Description Sent i-mode mail or SMS i-mode mail sent to multiple recipients Failed to be sent Sent mail list screen Mail that failed to be sent to multiple recipients Protected. Sent mail details screen SMS saved in the UIM Sent date and time 1 Displayed folder name 2 Sent date and time On the Outbox list screen, messages sent before today have the date displayed, and messages sent today have the time displayed. 3 Recipient phone number/mail address If the phone number or mail address is saved in the Phonebook, the name in the Phonebook appears.* * When the name is set to appear in "Switch view"→P158 4 Subject "SMS" is displayed for an SMS message. 5 Receiver type Indicate the receiver type of the sent mail (To, Cc, or Bcc). A melody is attached. The i-αppli can be started from the message text. / / / / / / ( / / / / / / ) Melody/Still Image/Video/Phonebook entry/ Schedule event/Bookmark/other file is attached. Files of multiple types attached Multiple files of the same type attached A file set with UIM restriction function is attached. Subject Sent as To/Cc/Bcc * Different icons indicated with ( ) appear on a detail screen. Mail 153 Unsent mail list screen Received Mail Folder/Sent Mail Folder List Screen Sub Menu Unsent mail list screen 1 Saved date and time Messages saved before today have the date displayed, and messages saved today have the time displayed. 2 Subject "SMS" is displayed for an SMS message. 3 Recipient phone number/mail address If the phone number or mail address is saved in the Phonebook, the name in the Phonebook appears.* * : When the name is set to appear in "Switch view"→P160 ■ Icons displayed on the Unsent mail list screen Icon Description Unsent i-mode mail Unsent SMS * Other than the above, same icons as for sent mail are used. Inbox list screen(P148)/Outbox list screen (P149) ] M[Menu] ] Perform following operations: [Manage folders] Create folder:Create a folder. Rename folder:Change the name of the selected folder. Sort folder:Select the display position of the folders and sort folders. Fold. security:Set or release security to the selected folder. ] Enter the security code ] "Yes" [Delete] Delete one:Delete the selected folder. ] Enter the security code ] "Yes" Del. all read*:Delete all read messages in Inbox. ] Enter the security code ] "Yes" Delete all:Deletes all messages in Inbox/Outbox. ] Enter the security code ] "Yes" [Auto sort] Set conditions for mail to be saved automatically in specified folders. →P150 [Send all Ir data] Send all mail in Inbox/Outbox via infrared.→P259 ] Enter the security code ] Enter the password ] "Yes" [Memory status] Display number of messages in Inbox/Outbox. [Open folder] Display contents of the selected folder. * This item is not displayed for sent mail. 154 Mail Note・ If I[Add] is pressed on the Inbox/Outbox list screen, a folder can be added. ・ This option is not available for the default "Inbox" and "Outbox" folders. ・ A folder containing protected mail cannot be deleted. ・ Protected mail or SMS saved in the UIM are not deleted. ・ If "Delete one" is selected for a folder with unread mail, a confirmation for deletion appears. Select "Yes" to delete. Received Mail List Screen Sub Menu Received mail list screen (P148) ] Move the cursor to mail ] M[Menu] ] Perform the following operations: [Move] Move this:Move the displayed mail to another folder. Move selected:Select mail and move them to another folder. ] Place check marks next to the messages to move ] I[Done] ] Select a destination folder ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Move all:Move all mail in the folder to another folder. [Delete] Delete one:Delete the selected message. Del. selected:Delete selected message. ] Place check marks next to the messages to be deleted ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Del all read:Deletes all read messages in the folder. ] Enter the security code ] "Yes" Delete all:Delete all mail in the folder. ] Enter the security code ] "Yes" SMS rmv. in fd.:Delete all SMS reports in the folder. ] Enter the security code ] "Yes" Mail 155 [Display settings] Switch view:Set the mail display method. Sort:Set conditions to rearrange the messages. [Filter] Display messages that meet certain conditions. Address:Display only mail from a specific address ] Select an item ] Select/input the address Subject:Display mail with a specific subject. Unread:Display only unread mail. Read:Display only read mail. Protected:Display only protected mail. Not protected:Display only unprotected mail. Image:Display only mail with an image attached. i-motion:Display only mail with an i-motion movie attached. Melody: Display only the mail with melody attached. Mail: Display only i-mode mail. SMS: Display only SMS/ SMS arrival All: Display all the mails in folder. [Read all] Mark all mail in the folder as read. [Protect on/off] Mark all mail in the folder as read. One on/off:Protect or unprotect the selected mail. Select on/off:Select and protect or unprotect mail. ] Place check marks next to the messages to be protected ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Protect all:Protect all mail in the folder. Unprotect all:Unprotect all mail in the folder. 156 Mail [Ir exchange] Send:Send selected mail via Infrared. Send all:Send all mail in the folder via infrared.→P259 ] Enter the security code ] Enter the password ] "Yes" [UIM] Copy to UIM:Copy the selected SMS to the UIM. Move to UIM:Move the selected SMS to the UIM. Copy from UIM: Copy the selected SMS to the terminal. Move from UIM:Move the selected SMS to the terminal. [Memory status] Display the number of messages in Inbox. Note ・ If there are unread messages, a confirmation for deletion appears. Select "Yes" to delete. ・ Addresses matched completely and subjects matched even partially are displayed. Received Mail Detail Screen Sub Menu Received mail detail screen (P148) ] M[Menu] ] Perform the following operations: [Reply] Reply to the displayed mail.→P144 [Forward] Forward the displayed mail.→P145 [Move] Move the displayed mail to another folder. [Delete] Delete the displayed mail. [Protect on/off] Protect or unprotect the displayed mail. [Store] Save phone numbers or email addresses from the displayed mail to the Phonebook. →P145 [Attach file] Save, play/view, or delete files attached to the displayed mail. → P146 [Inline image] Save images contained in the displayed mail or view detailed information.→P147 [Display settings] Scroll:Set the number of lines scrolled when H is pressed on the mail display screen. Font size:Set a font size for the message text on the Message display screen. [Copy] Copy contents of the displayed mail. Body:Select and copy contents of text.→P301 Subject:Copy the subject. Sender:Copy the destination. If there are multiple addresses, select an address from the Mail address list screen. [Save template] Save Deco-mail as a template. ] C[Select] ] Edit the title ] I[Done] [Export] Ir exchange:Send the displayed mail via IrDA. UIM:Copy or move the displayed SMS to the UIM, or copy or move the selected SMS from the UIM to the terminal. Note ・ Up to 1000 messages can be protected. ・ Protected mail cannot be deleted. Mail 157 Sent Mail List Screen Sub Menu Sent mail list screen (P149) ] Move the cursor to mail ] M[Menu] ] Perform the following operations: [Edit] Edit and send sent mail.→P131, P170 [Move] Move this:Move the displayed mail to another folder. Move selected:Select mail and move them to another folder. ] Place check marks next to the messages to move ] I[Done] ] Select a destination folder ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Move all:Move all mail in the folder to another folder. [Delete] Delete one:Delete the selected message. Del. selected:Select and delete messages. ] Place check marks next to the messages to be deleted ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Delete all:Delete all mail in the folder. ] Enter the security code ] "Yes" 158 Mail [Display settings] Switch view:Set the mail display method. Sort:Set conditions to rearrange the messages. [Filter] Display messages that meet certain conditions. Address:Display only mail sent to a specific address. ] Select an item ] Select/input the address Subject:Display only mail with a specific subject. Protected:Display only protected mail. Not protected:Display only unprotected mail. Image:Display only mail with an image attached. i-motion:Display only mail with an i-motion movie attached. Melody:Display only mail with a melody attached. Mail: Display only i-mode mail. SMS: Display only SMS/SMS arrival All: Display all the mails in folder. [Protect on/off] One on/off:Protect or unprotect the selected mail. Select on/off:Select and protect or unprotect mail. ] Place check marks next to the messages to be protected ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Protect all:Protect all mail in the folder. Unprotect all:Unprotect all mail in the folder. [Ir exchange] Send:Send selected mail via Infrared. Send all:Send all mail in the folder via infrared.→P259 ] Enter the security code ] Enter the password ] "Yes" [UIM] Copy to UIM:Copy the selected SMS to the UIM. Move to UIM:Move the selected SMS to the UIM. Copy from UIM: Copy the selected SMS to the terminal. Move from UIM:Move the selected SMS to the terminal. [Memory status] Display the number of messages in Outbox. Note ・ Addresses matched completely and subjects matched even partially are displayed. Sent Mail Details Screen Sub Menu Sent mail details screen (P149) ] M[Menu] ] Perform the following operations: [Edit] Edit and send sent mail.→P131、P170 [Move] Move the displayed mail to another folder. [Delete] Delete the displayed mail. [Protect on/off] Protect or unprotect the displayed mail. [Store] Save phone numbers or email addresses in the displayed mail to the Phonebook. →P145 [Attach file] Save, play/view, or delete files attached to the displayed mail.→ P146 [Inline image] Save images contained in the displayed mail or view detailed information.→P147 Mail 159 [Display settings] Scroll:Sets the number of lines scrolled when H is pressed on the mail Display Screen. Font size:Set a font size for the message text on the Message display screen. [Copy] Copy contents of the displayed mail. Body:Select and copy contents of text.→P301 Subject:Copy the subject. Sender:Copy the destination. If there are multiple recipients, select addresses to copy. [Save template] Save Deco-mail as a template. ] C[Select] ] Edit the title ] I[Done] [Export] Ir exchange:Send the displayed mail via IrDA. UIM:Copy or move the displayed SMS to the UIM, or copy or move the selected SMS from the UIM to the terminal. Note ・ Up to 500 messages can be protected. ・ Protected mail cannot be deleted. Unsent Mail List Screen Sub Menu Unsent mail list screen (P149) ] Move the cursor to mail ] M[Menu] ] Perform the following operations: [Delete] Delete one:Delete the selected message. Del. selected:Select and delete messages. ] Place check marks next to the messages to be deleted ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Delete all:Delete all unsent messages. ] Enter the security code ] "Yes" [Display settings] Switch View:Set the mail display method. Sort:Set conditions to rearrange the messages. [Filter] Display messages that meet certain conditions. Address:Display only mail sent to a specific address. ] Select an item ] Select/input the address Subject:Display only mail with a specific subject. Image:Display only mail with an image attached. i-motion:Display only mail with an i-motion movie attached. Melody:Display only mail with a melody attached. Mail:Display only i-mode mail. SMS:Display only SMS. All: Display all the mails in folder. [Ir exchange] Send:Send selected mail via Infrared. Send all:Send all unsent messages via infrared. →P259 ] Enter the security code ] Enter the password ] "Yes" [Memory status] Display number of unsent messages. 160 Mail Received Mails/Sent Mails/Recent Mails an entry in the log 2 ・Select I[Mail]: Create mail to the receiver or sender of the Using Mail Logs selected entry. Sent mail logs. Also, up to 60 entries of sent/received mail will be saved in "Recent mail". These logs can be used to compose mail, and save addresses to the phonebook. ・ If the maximum number of recordable entries has been exceeded, the oldest entries will be overwritten first. Example: When displaying the received mail logs The Stand-by display ] L (Hold for 1 seconds) 1 ■ To display Sent mails logs Example: Received Mail History List Screen The Stand-by display ] R (for 1 seconds) ■ To display recent mail The Stand-by display ] A (for 1 seconds) 1 The name saved in the Phonebook 2 Other party's mail address 3 Receive/Sent date & time Example: Received Mail History List Screen ■ Icons displayed on the received mail log/send log/Recent Mails Icon Description Received mail Sent mail Received SMS Sent SMS Mail and SMS that were Received/Sent while Roaming* * The received/sent date and time is shown in the local time. Mail 161 Received Mail Log/Sent Mail Log/Recent Mail Sub Menu Press H to move the cursor to the received/sent log ] M [Menu] ] Perform the following operations: [Video phone call] Make a video call to the selected log entry. [Compose mail] Create mail to the address or sender of the selected log entry. Go to Step 3 in "Creating and Sending i-mode Mail" (P131). [Add to phonebook] Save the mail address of the selected log entry to the phonebook. Go to Step 2 in "Saving Contacts to the Phonebook from Received or Dialed Calls" (P85). ・ Save only unsaved mail addresses. [Customize call] Edit the phone number of the selected log entry and dial. [Change list]* Recent call:Display all incoming and outgoing call log entries. Recent mail:Display all incoming and outgoing mail log entries. Received calls:Display Received calls. Received Mail:Display received mail log entries. Redial:Display phone redial log entries. Sent Mail:Display Sent mail log entries. ・ The item for the currently displayed log is not shown. [Delete] Delete the selected log entry. [Delete all]* Delete all entries from the mail logs. * This option does not appear on the Received mail logs/Sent mail logs/Recent mail detail screen. 162 Mail Mail setting Setting FOMA Terminal Mail Functions Settings Auto sort Configuring Network Settings The Stand-by display ] g ]"Mail setting" ] "Communication" ] Perform the following operations: [Receive option set] To enable/disable the Receive option (P142), set whether to receive i-mode mail automatically. On:Mail will not be received automatically. Off:Mail will be automatically received. iI[Done] [Receive attach file] Specify attached files to be retrieved when i-mode mail is received. ] Place check marks next to items to be downloaded ] I[Done] [Check new messages] Specify request items when using "Check new messages". ] Place check marks next to the items to check ] I[Done] Note ・ When this option is set to "ON", i-mode mail cannot be received automatically. Incoming i-mode mail is kept at the i-mode Center, and the Receive notify screen (P143) appears. ・ If the attached file set not to be received arrives, the file name is contained in the message text. You can select and receive attachments. →P146 Display Configuring Display Settings The Stand-by display ] g ] "Mail setting" ] "Display" ] Perform the following operations: [Font size] Set a font size for text on the Mail detail screen. [Scroll] Set the number of lines scrolled when H is pressed on the Mail detail screen or the Preview screen [Mail list] Set how to display mail on the Mail list screen. Edit Editing Header/Signature/Quotation The Stand-by display ] g ] "Mail setting" ] "Edit" ] Perform the following operations: [Folder security] Set security for Inbox/Outbox and Unsent message in the Mail menu. To display security-enabled mail, the security code must be entered. ] Enter the security code ] Place check marks next to items to enable ] I[Done] [Edit header] Set a header to be inserted to i-mode mail text. ] C[Edit] ] Enter a header [Melody auto play] Set whether to automatically play attached or pasted melodies on the Mail display screen. [Edit signature] Set a signature to be inserted to i-mode mail text. ] C[Edit] ] Enter a signature [Receiving display] Set whether to notify with a ring tone or Receive results screen when i-mode mail or Message R/F is received while operating the FOMA terminal (displaying other than Stand-by display). Alarm mode:Open the Received results screen. Operation mode:FOMA terminal operations will take precedence without the Received result screen being displayed. [Edit quotation] Set a symbol indicating quotation from received mail used for replying by quoting. ] C[Select] ] Enter a quotation symbol ] I[Done] [Auto attach] Set whether to automatically attach a header or signature when composing i-mode mail. ] Place check marks next to items to be attached ] I[Done] Mail 163 Note ・ Even if 「Alarm mode」 is being set, depending on the function which is being used, the result of receiving message will not be displayed. Others Configuring Other Settings The Stand-by display ] g ] "Mail setting" ] "Others" ] Perform the following operations: [Check setting] Confirm the contents set in "Mail setting". [Reset setting] Reset the contents set in "Mail setting" to the default. ] Enter the security code ] "Yes" Note ・ The header and signature will be reset. Receive Message When Receiving Messages R/F When the terminal is in the service area, Messages R/F are sent automatically from the i-mode Center. When Messages R/F arrives, the display, ring tone or vibration notifies you of new messages. ・ Up to 100 each MessageR or MessageF can be saved.However, the number of savable messages varies depending on the message size. Viewing New Message R/F When Message R/F arrives, the newest message appears automatically. ・ "Message auto-display" can be configured to allow the detail screen to automatically open after a Message R/F arrives. → P165 Automatically Receiving a Message R/F When it Arrives ・ After Message R/F is received, the reception result is displayed. ・ The previous screen returns if no operation is performed for approximately 30 seconds. 164 Mail Auto-display Message Displaying Messages R/F Automatically Check new message Checking for New Messages R/F Set how to automatically display Message R/F. The Stand-by display ] I] "i-mode setting" ] "Display" ] "Auto-display" ] Perform the following operations: Message R preferred:If a Message R and F are received simultaneously, MessageR is automatically shown. Message R Only:Only MessageR is automatically displayed. Message F preferred:If a Message R and F are received simultaneously, MessageF is automatically shown. Message F Only:Only Message F is automatically displayed. Auto-display off:Messages are not displayed automatically. Melody Auto Play Playing a Melody Automatically When Message R/F is Displayed Set how to automatically display Message R/F. Set whether to automatically play a melody when Message R/F is displayed. The Stand-by display ] I]"i-mode setting" ] "Display" ] "Melody auto play" ] "ON"/"OFF" Message R/F that were not received because the terminal was out of service area are stored at the i-mode Center, and or will appear at the top on the screen. Checking new messages downloads the stored Messages R/F. ・ You cannot check new messages when the terminal is out of service area. ・ Item to check ( i-mode mail or Messages R/F) in "Check new messages" (P162). g(for 1+ seconds) in Stand-by 1 When checking is completed, the Reception result screen opens. "Message R"/"Message F" Note ・ Incoming Message R/F is saved at the i-mode Center when: - Power is off - A video call in progress - Self mode is activated - The terminal is out of service area - The FOMA Terminal MessageR/F mailbox is full Mail 165 ■ Icons displayed on the Message R/F list/detail screen Message R/MessageF Icon Viewing New Message R/F When Messages R/F arrive from the i-mode Center, appears at the top of the screen. The Stand-by display ] I] "Message" ] "Message R"/ "Message F" 1 Received date and time 2 Subject Example: Message R Screen Select a Message R/F 2 ・ I[Delete]: Delete the selected Message R/F 1 Received date and time 2 Subject Example: MessageR Screen Mail Unread Messages R/F Read Messages R/F Protected. Received date and time A melody/still image/video is attached. Multiple files are attached. Damaged attachment or attachment that failed to be downloaded ) (Gray) Deleted attachment (Example. For a still image) ) (Blue) Attachment that is not downloaded (Example: For a still image) ) (Blue) Attached file partially retrieved (Example: For a still image) Attachment with UIM security function activated Subject * Different icons indicated with ( ) appear on a detail screen. 166 Description Messages R/F List Screen Sub Menu MessageR/F List screen (P166) ] Move the cursor to a message ] M[Menu] ] Perform the following operations: [Delete] Delete one:Delete the selected Message R/F. Delete selected:Select and delete Message R/F. ] Place check marks next to the Messages R/F to delete ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Unmark all", or "Switch view" Del all read:Delete all read Messages R/F. ] Enter the security code ] "Yes" Delete all:Delete all Message R/F. ] Enter the security code ] "Yes" [Display settings] Switch View:Set the display method of the Message R/F list screen. 1 lines:Display only the subject in one line. 2 lines:Display the subject and received date and time in two lines. Sort:Rearrange Message R/F by the set conditions. [Filter] Display only the Message R/F that meet certain conditions. Subject:Display only the Message R/F with a specific subject. Unread:Display only the unread Message R/F. Read:Display only the read Message R/F. Protected:Display only the protected Message R/F. Not protected:Display only the unprotected Message R/F. Image:Display only the Message R/F with attachments. Melody:Display only the Message R/F with a melody attached. All:Display all Message R/F. [Read all] Mark all Message R/F to "read". [Protect on/off] One on/off:Protect or unprotect the selected Message R/F. Select on/off:Select and protect/unprotect Messages R/F. ] Place check marks next to the Messages R/F to delete ] I[Done] ] "Yes" ・ Press M[Menu] to select "Mark all", "Release all", or "Switch view" Protect all:Protect all Messages R/F. Unprotect all:Unprotect all Messages R/F. [Memory status] Display the number of Messages R/F. Note ・ If there are unread Messages R/F, a confirmation for deletion appears. Select "Yes" to delete. Mail 167 Messages R/F Detail Screen Sub Menu MessageR/F detail screen(P166)] M[Menu] ] Perform the following operations: [Delete] Delete the displayed Message R/F. [Protect on/off] Protect or unprotect the displayed Message R/F. [Add to ph.book] Save the mail address or phone number contained in the message text of the displayed Message R/F to the phonebook. ] Select the address to save to the phonebook ] "Yes" Go to Step 2 in "Saving Contacts to the Phonebook from Received or Dialed Calls" (P85). [Attach file] Save/play/display an attachment of the currently displayed Message R/F. Perform the following steps to save attachments. ] Select the attachment ] "Save" ] "Yes" Perform the following steps to play/display the attachment. [Inline image] Save an image inserted in the currently displayed Message R/F. ] Select the image ] "Save" ] "Yes" ・ To view information about the selected image, select "File property". [Background Image] Save the background image used in the displayed Message R/F. ] "Save" ] "Yes" ・ To view information about the image, select "File property" [Display settings] This option is not available. 168 Mail Note ・ Up to 100 each Message R/F can be protected. ・ Protected messages cannot be deleted. SMS Compose/Send Creating and Sending SMS ・ You can send and receive SMS to/from parties of overseas carriers other than DOCOMO. Visit DOCOMO website for countries and overseas carriers available. The Stand-by display ] g ]"SMS" ] "Compose SMS" Compose SMS Screen 2 Select (Receiver) field ] "Direct input" ] Enter the phone number ・ Up to 21 digits (including "+" can be entered. ・ You can select "Int. call", "Select prefix" or "Cancel" by pressing M [Menu] on the Phone number entry screen. Press I [Cancel] to cancel the entry. ・ The address can be selected from the Phonebook, Sent mail logs and Received mail logs.→P169 (Body) field ] Enter the message text 3 ・Select The number of characters which can be entered differs depending on the settings in "SMS input character". →P172 I[Send] Note ・ For a destination of an overseas carrier other than DOCOMO, enter in the order of "+" (Press 0 for 1+ seconds), "Country Code" and "other party's mobile phone number". For the mobile phone number, skip the leading "0", if any. Numbers may be entered in the order of "010", "Country Code" and the "other party's mobile phone number" (to reply to overseas SMS received, enter "010"). ・ Characters may not be sent correctly to the other party depending on the signal strength. ・ When you send an SMS to a receiver who uses a foreign carrier and some of the characters you send are not supported by the carrier, those characters may not be displayed correctly. ・ Even if you set "Activate/Deactivate" to "Not notify", your Caller ID is sent to the other party. ・ You cannot reply to SMS sent with Unknown ID or from a public phone. ・ When sending mail, the excluding "Pictographs" will be changed to half byte space. Mail 169 Create SMS Screen Sub Menu Create SMS screen (P168) ] M[Menu] ] Perform the following operations: [Send] Send SMS. [Save] Save SMS being created or edited as Unsent mail. [Add address] Sent address:Select an address from the Sent mail logs. Rcv. address:Select an address from the Received mail logs. Open phonebook:Select an address from the phonebook. Direct input:Enter the receiver address directly. [Report request] Set whether to request an SMS delivery notification when SMS is delivered.→P170 [Validity period] Set the duration a sent SMS can be kept undelivered at the SMS center.→P172 [Delete body] Delete the message text. [Delete SMS] Delete the SMS being composed. 170 Mail Receive SMS Automatically Receiving SMS (Short Message Service) Messages When the FOMA terminal is in the service area, SMS is automatically received. ・ Up to 1000 received SMS messages including i-mode mail can be saved. However, the savable number depends on the amount of the data. When SMS is received screen appears at the top of the When the reception is completed, the Reception result screen opens. ・ The previous screen returns if no operation is performed for approximately 30 seconds. ・ Selecting "SMS" opens the Inbox list screen. ・ Until the Detail screen of received SMS opens, appears at the top of the Reception screen and (the number indicates the result screen number of messages) appears on the Stand-by screen. SMS Settings Viewing New SMS Configuring SMS Settings Received result screen (P170) ] "SMS" ] Select a folder Select the SMS to display SMS Report Set whether to request an SMS delivery report after the SMS is delivered. If this option is set to "ON", an SMS report request indicating that the SMS has been delivered to the receiver will be sent to you. Received Mail Details screen Check new SMS The Stand-by display ] g ] "Mail setting" ] "SMS" ] "SMS report request" ] "ON"/"OFF" Note ・ An SMS report will show the sent time and the number of the receiver. Checking for SMS (Short Message Service) Messages SMS that could not be received because the terminal was out of service area (or for other reasons) are stored in the SMS Center. You can receive stored SMS by checking the SMS Center. ・ You cannot check new messages while out of the service area. The Stand-by display ] g ]"SMS" ] "Check new SMS" 1 When the reception is completed, the Reception result screen opens. Mail 171 SMS Validity Period Set the length of period that a sent SMS will be kept at the SMS center delivered because the recipient terminal is out of service area, etc. ・ If "0 day" is selected, sending the SMS message is retried after a while, then the message is deleted from the SMS center. * You usually do not need to change this setting. You can specify the SMS center. The Stand-by display ] g ] "Mail setting" ] "SMS" ] "SMS Validity Period" ] Select a period SMS input character Set the maximum number of characters that can be entered in an SMS message text. SMS Center The Stand-by display ] g ] "Mail setting" ] "SMS" ] "SMS Validity Period" ] Select a period Japanese (70 characters):Set the maximum number of characters to 70. English (160 characters):Set the maximum number of characters to 160. Japanese may not be entered. [SMSC] DOCOMO:Set DOCOMO as the SMS center. Others:Set a carrier other than DOCOMO as the SMS center. [Address] When "Others" is selected for "SMS center", enter the connection address of the SMS center. [Type of number] Set when "Others" is selected for "SMS center". unknown:If you do not know whether the SMS center phone number is for international calls, select this option. international:If the SMS center phone number is for international calls, select this option. 172 Mail M[Menu] ] (Settings) ] "International roaming" ] "Network" ] "SMS center" ] Perform the following operations: I[Done] i-mode/i-motion/i-Channel i-mode ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Displaying the i-mode Menu ・・・・・・・・・ i-mode Menu 174 174 Accessing Sites Accessing Sites ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Operations on i-mode/Web Sites ・・・・・・・・・・・・・・・・・・ Saving Entries in My Menu ・・・・・・・・・・・・・ My Menu Changing the i-mode Password ・・・・・・・・・・・・・・・・・・・・・・・・・ Change i-mode Password Opening a Web Site ・・・・・・・・・・・・・ Internet Access Saving and Quickly Displaying a Site/Homepage ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・Bookmarks Save Site Contents ・・・・・・・・・・・・・・・・・Screen Memo Configuring i-mode Settings Configuring i-mode Settings ・・・・・・・ i-mode setting 189 Using Security Certificates 175 177 179 180 180 181 183 Manipulating SSL Certificates SSL Certificate Info 192 Using i-motion i-motion ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Downloading i-motion Movies from Sites ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ i-motion Download 193 193 Using i-Channel i-Channel ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Displaying the i-Channels ・・・・・・・・・・・・・・・・・・・・・・・・・ Configuring i-Channel Settings ・・ i-Channel Setting 195 195 196 Downloading Images/Melodies from a Site Downloading Data from Sites ・・・・・・・・・・・・・・・・・・・・・ 186 Useful i-mode Functions Using the Phone To/Mail To/Web To/i-αppli To Functions ・・・・Phone To/Mail To/Web To/i-αppli To function 188 173 i-mode Menu i-mode i-mode is a service that allows the display of an i-mode supporting FOMA terminal (i-mode terminal) to be used with online services such as site access, Internet access, or i-mode mail. ・ i-mode is a fee-based service requiring a separate subscription. ・ For details about i-mode, refer to "Mobile Phone User's Guide [i-mode] FOMA version". Before Using i-mode ・ Contents of sites and web sites are generally protected by copyright law. Data, such as text or images you download to the i-mode terminal from sites or web sites, can be used only for personal entertainment, but cannot be used, in whole or in part, as it is or after modification, for sale or redistribution, without the consent of the copyright holders. ・ If you insert another UIM or turn the terminal power on without the UIM, depending on the model of the terminal, still images, videos, melodies, mail attachments (still images, videos or melodies), screen memos, or Messages R/F cannot be viewed or played. ・ When a file with UIM restrictions is set as the Standby display or ring tone, the setting will revert to its default if a different UIM is inserted or the terminal power is turned on without a UIM. Displaying the i-mode Menu You can use i-mode functions from the i-mode Menu. The Stand-by display ] I ] Perform the following operations: i-mode menu screen [iMenu] Connect to the i-mode Center.→P175 [Bookmark] Open the Bookmark folder list screen.→P182 [Screen memo] Open the Screen memo list screen.→P184 [Last URL] Open the last viewed i-mode site or web site.→P177 [Go to location] Enter a URL to connect to the Internet.→P180 [Message] Display a list of Message R/F.→P166 174 i-mode/i-motion/i-Channel [i-Channel] Open the i-channel menu screen.→P196 [Check new messages] Check whether i-mode mail or Message R/F is stored at the i-mode Center.→P165 [i-mode setting] Configure the terminal i-mode functions.→P189 Accessing Sites You can use various services offered by IP (Information Providers). ・ Services vary depending on the Information Provider. Some sites require a separate subscription. i-mode menu screen(P174) ] "iMenu" ] "メニューリスト/検索(Menu list/Search)" appears at the top of the screen during i-mode communication. C[Select] ・ Press I [Stop] to cancel a page download. an item (link) 2 ・Select I [Bookmark]: Save the URL of the current page as a Bookmark. ・ P: Exit i-mode. Select "Yes". Note ・ When a number appears in front of a linked item, press the corresponding Dial Key to access the site. It may not be possible to connect to some sites. ・ Some sites may require the "serial number of your mobile phone/UIM" to be sent in order to gain access. The "serial number of your mobile phone/UIM" is sent to the Information Provider (IP) so that the IP can recognize you and provide customized information. The serial number is also used to judge whether the contents that the IP provides can be used on your mobile phone. The "serial number of your mobile phone/UIM card" is sent via the Internet to the IP and it may be seen by a third party. This action does not reveal your postal address, age, or sex to the Information Provider. ・ When information about the music played by your mobile phone is required from the website, a confirmation screen for sending music information appears. When "Yes" is selected, the information (title, artist name, play date/time) of the music played by your mobile phone is sent. The music information to be sent is used by the IP (Information Provider) to provide you with customized information, etc. Site Display Screen Sub Menu From the currently accessed site ] M[Menu] ] Perform the following operations: i-mode/i-motion/i-Channel 175 [Bookmark] Save:Save the URL of the current site as a Bookmark. Go to Step 2 in "Saving in Bookmarks" (P181). List:Open the Bookmark folder list screen.→P182 Save:Save the current page as a Screen memo.→P181 List:Open the Screen memo list screen.→P182 [Change char code] If characters are not displayed correctly, change the character encoding. [Save image] Save images contained in the current page.→P186 [Retry] Play an animation/Flash movie contained in the current page from the beginning. [Show properties] Show URL:Display the URL of the current page. Page properties: Display the URL and title of the current page. Certificates:If the current page is an SSL page, the SSL certificate is displayed. [Go to location] Input address:You can access a web site by entering its URL. Go to Step 2 (P180) in "Opening Web Site". URL history:You can visit a web site by selecting an entry in the URL history. Go to Step 2 in "Using the URL History" (P181). [Home] Connect to the URL set as "Home". [Reload] If the site is updated, the updated page opens. [Compose message] Create i-mode mail with the URL of the open page pasted in the message text. Go to Step 2 in "Creating and Sending i-mode Mail" (P131). Select from the following options when a linked item is selected. This page:Attach the URL of the current page. Link page:Attach the URL of the link. 176 i-mode/i-motion/i-Channel [Add to phonebook] Save a phone number or mail address on the web page to the Phonebook.→P179 [Settings] Image display:Set whether to display images contained on the current page. Sound effect: Set whether to play sound effects in the Flash movie contained on the current page. i-motion type: Specify the i-motion type to download. →P194 Note ・ If characters are not displayed correctly, repeat the steps. However, after the character code is changed 4 times, the default character encoding returns. ・ Characters may not be displayed correctly even after repeatedly changing the encoding. ・ The new character encoding is valid only for the open site. ・ Images may not be displayed correctly even if set to "Display". In this case, appears. Last URL To download an SSL page The screen to the right opens when you access an SSL site. After the download is completed, the SSL page opens and appears on the top of the screen. Open the Most Recently Accessed Web Page After i-mode is terminated, the URL of the last open page is saved in "Last URL". You can re-connect to the most recently accessed page using Last URL. To return to a normal site The screen to the right opens when you return to a non-SSL site. Select "Yes" to return to a normal site, and disappears. i-mode menu screen (P174) ] "Last URL" ] C[Connect] Operations on i-mode/Web Sites This section describes basic operations on i-mode/Web sites (pages). Going Back to the Previous Page/Going Note ・ If the SSL Certificate has already expired or the site does not support SSL, a warning indicating that this site may not be secure may appear. To connect, select "Yes". However, your personal information (credit card number or contact address) may not be sent safely. The FOMA terminal temporarily saves the displayed site data in a Cache. Data saved to the cache can be displayed, without revisiting the site, by pressing J. ・ However, the site will be reloaded if the data is larger than the cache size, or if the site requires the latest information always be loaded. ・ Entered characters or settings at the site will not be stored in the cache. i-mode/i-motion/i-Channel 177 ・ Terminating i-mode deletes data from the cache. Example: Pages are displayed in the order of Screen "A" → "B" → "C" → "B" → "D" If opening the pages in the order "A" → "B" → "C", then returning to "B", and opening "D", "C" is deleted from the cache. Pressing J displays "B" ⇔ "D". Selecting Selecting Links Links or or Items Items You may need to perform operations using the following items while connected to i-mode. For details, refer to "Mobile Phone User's Guide [i-mode] FOMA version". Name Radio button (Not selected) Details You can select only 1 item. (Selected) …Paging order Display example Check box (Not selected) …Reverse paging order starting from screen "D" You can select multiple items. (Selected) Note ・ Page navigation may differ when a Flash movie is displayed. Text box You can enter text. Select a text box to open the text entry screen. Pull down menu Select an item from a list of options. Click pull down menus to display the items. Note ・ You can enter a Phonebook entry or your own number saved in the FOMA terminal into a text box by performing the following steps: M[Menu] ] "Quote" ] "Phonebook"/"Own number" 178 i-mode/i-motion/i-Channel Displaying Flash Movies The FOMA terminal supports Flash, an animation technology using images and sounds. You can access sites that provide various kinds of animations using the terminal. You can also download a Flash file and set it for the Stand-by display. Note ・ Even if a Flash file is displayed, the animation may not work correctly. ・ Some Flash files use data about your FOMA terminal. To allow Flash files to use the data, set "Use phone info" to "Yes". ・ If the Flash movie contains audio, it will be played in the volume set from the Flash playback screen (P242). To turn off sound effects, set "Sound effect" to "OFF".→P189 ・ If you play a Flash file with vibration set, the terminal vibrates regardless of the "Sounds&Vibration" (P100) settings on the terminal. ・ Flash movies are not displayed if "Images" is set to "OFF". →P190 ・ Flash movies may appear differently depending on the location they are saved, the Data box, or Screen memo. ・ Flash sound effects are not played if they are set to the Stand-by display / Call Display. Adding a Mail Address/Phone Number to Phonebook You can save a phone number or mail address displayed at a site to the Phonebook. From the currently accessed site ] Move the cursor to a phone number/mail address ] M[Menu] ] "Add to ph.book" ] "Yes" Go to Step 2 in "Saving Contacts to the Phonebook from Received or Dialed Calls" (P85). My Menu Saving Entries in My Menu Frequently accessed sites can be saved in My Menu for quick connection. ・ Up to 45 entries can be saved in My Menu. ・ Some sites cannot be saved in My Menu. Display a site to save ] Select "マイメニュー登録(Store in My Menu)" ・ Item names may vary depending on the site. Select i-mode password text box ] Enter the i-mode password ] "OK" ・ The entered i-mode password is masked by asterisks ":". ・ i-mode password→P180 Note ・ When you subscribe to a fee-based site in "メニューリ スト (Menu list)", the site is added to My Menu automatically. i-mode/i-motion/i-Channel 179 Internet Access Accessing a Site from My Menu i-mode menu screen (P174) ] "iMenu" ] "English iMenu" ] "My Menu" ] Select the site to access Change i-mode Password Changing the i-mode Password "i-mode Password" (4 digit) is required to subscribe to and unsubscribe from message services or fee-based i-mode sites, or configure mail settings. The password is set to "0000" by default. Change it to a number of your own choice. Do not reveal your i-mode password to others. Opening a Web Site You can view a web site by entering its URL. A URL consists of half-pitch alphanumeric characters and symbols. 1 i-mode menu screen (P174) ] "Go to location" address" ] Enter the URL ] C[Set] 2 ・"Input Up to 256 half-pitch characters can be entered. i-mode menu screen(P174) ] "iMenu" ] "English ] "Options" ] "Change i-mode Password" Select the "Current Password" text box ] Enter the i-mode password (4 digits) Note ・ Web sites that do not support i-mode may not be displayed correctly. ・ When the same URL as a history entry is accessed, the old URL is overwritten and the entry is shown as the latest URL in the history. Select "New Password" text box ] Enter a new i-mode password (4 digits) Using the URL History Select the "New Password (Confirmation)" text box ] Enter the new i-mode password (4 digits) "Select" Up to 10 previously entered URLs are stored in the URL History. You can access a web site by using the URL history. i-mode menu screen (P174) ] "Go to location" ] "URL history" Note ・ If you forget the i-mode password, you need to bring a picture ID such as your driver's license to a service counter such as a docomo shop to have the i-mode password reset to "0000". 180 i-mode/i-motion/i-Channel URL history list screen 2 Select the URL to access Note ・ If more than 10 URLs are saved in the history, the oldest URL will be overwritten first. ・ The URL visited will be re-displayed at the top of the URL history. URL History List Screen Sub Menu URL history list screen (P180) ] Move the cursor to a URL history entry ] M[Menu] ] Perform the following operations: [Compose message] Create i-mode mail with the URL of the selected history entry already pasted in the message text. Go to Step 2 in "Creating and Sending i-mode Mail" (P131). Bookmarks Saving and Quickly Displaying a Site/Homepage Save frequently accessed sites or web sites in Bookmarks to display the page quickly. Saving in Bookmarks [Connect] Connect to the selected entry in the URL history. ・ Up to 100 URLs can be saved in the Bookmarks folder. [Edit URL] Edit and connect to the URL of the selected history entry. ] Edit URL ] C[Set] 1 From the currently accessed site ] I[BK.mark] the title ] I[Done] ] Select a destination folder 2 ・Edit If there is already the same URL saved, a confirmation [Delete] Delete one:Delete the selected URL history entry. Del. selected:Select and delete an entry in the URL history. ] Place check marks next to the URL history entries to delete ] I[Done] ] "Yes" ・ Press M[Menu] and select "Mark all" or "Unmark all" Delete all:Delete entire URL history. ] Enter the security code ] "Yes" screen to overwrite appears. Select "Yes". Note ・ Up to 256 half-pitch characters can be entered for a URL saved as a Bookmark. ・ Up to 12 full-pitch or 24 half-pitch characters can be saved for a Bookmark title. ・ If the maximum number of Bookmarks has been saved, a confirmation screen appears. Select "Yes" ] Select a folder ] Select Bookmark to delete ] Select a destination folder. i-mode/i-motion/i-Channel 181 Bookmark Folder List Screen Sub Menu Accessing Web Sites from Bookmarks i-mode menu screen (P174) ] "Bookmark" 1 ・ I[Add]: You can add a folder. Up to 16 full-pitch or 32 half-pitch characters can be entered for a folder name. ■ Icons displayed on the Bookmark folder list screen Description (Gray) "Bookmark" (pre-installed folder) (Blue) User defined folder Bookmark list screen 182 i-mode/i-motion/i-Channel [Delete] Delete one:Delete the selected folder. ] Enter the security code ] "Yes" Delete all:Delete all Bookmarks. ] Enter the security code ] "Yes" [Send all Ir data] Send all bookmarks via Infrared.(P259) ] Enter the security code ] Enter the password ] "Yes" [Memory status] Display the number of saved bookmarks. Select a Folder the Bookmark URL to access 3 ・Select I[URL]: Display the URL. Bookmark list screen (P181) ] Move the cursor to folder ] M[Menu] ] Perform the following operations: [Manage folder] Create folder:You can add a folder. Up to 16 full-pitch or 32 half-pitch characters can be entered for a folder name. Rename folder:Edit the selected folder name. Sort folder:Sort the selected folders. Bookmark Folder List Icon Note ・ The pre-installed "Bookmark" folder cannot be renamed, moved, or deleted. ・ If there is a bookmark in the folder, a confirmation appears. Select "Yes" to delete. Bookmark Folder List Screen Sub Menu Bookmark list screen (P181) ] Move the cursor to a bookmark ] Select the bookmark ] M [Menu] ] Perform the following operations: [Connect] Connect to the selected bookmark site. [Edit title] Edit the title or URL of the selected Bookmark. ] Edit the title or URL ] I[Done] [Move] Move this:Move the selected bookmarks to another folder. Move selected:Select and move a bookmark. ] Place check marks next to the bookmarks to move ] I[Done] ] Select a destination folder ] Press M[Menu] and select "Mark all" or "Unmark all" Move all:Move all bookmarks in the folder to another folder. [Delete] Delete one:Delete the selected bookmark. Del. selected:Select and delete bookmarks. ] Place check marks next to the bookmarks to delete ] I[Done] ] "Yes" ・ Press M[Menu] and select "Mark all" or "Unmark all". Delete all:Delete all bookmarks. ] Enter the security code ] "Yes" [URL] Display the URL of the selected Bookmark. [Copy URL] Copy the URL of the selected Bookmark. [Ir exchange] Send:Send the selected bookmark via Infrared. Send all:Send all bookmarks in the folder via infrared.(P259) ] Enter the security code ] Enter the password ] "Yes" [Memory status] Display the number of saved bookmarks. Screen Memo Save Site Contents You can save the currently open page as a screen memo. Saved Screen memo pages can be opened without connecting to i-mode. Saving Screen Memos ・ Up to 50 Screen memos can be saved. However, fewer pages can be saved if the saved pages are long. ・ Up to 100 Kbytes per page can be saved. From the currently accessed site ] M[Menu] ] "Screen memo" ] "Save" ] "Yes" Note ・ If the maximum number of Screen memos have already been saved, a prompt appears to ask whether you want to select and delete a memo. To select, choose "Yes" ] and select a Screen memo to delete. [Compose message] Create i-mode mail with the selected bookmark attached. Go to Step 2 in "Creating and Sending i-mode Mail" (P131). i-mode/i-motion/i-Channel 183 Screen Memo List Screen Sub Menu Viewing Screen Memos i-mode menu screen (P174) ] "Screen memo" Screen memo list screen(P184) ] Move the cursor to a Screen memo ] M[Menu] ] Perform the following operations [Display] View the selected Screen memo. [Edit title] Edit the title of the selected Screen memo. Up to 12 full-pitch or 24 half-pitch characters can be entered for a title. Screen memo list screen Select the Screen memo to view 2 The Screen memo detail screen is displayed. ・ I[URL]: Display the URL. Note ・ The information saved in a Screen memo is from the time it was saved. The memo may not contain the latest information. [Delete] Delete one:Delete the selected Screen memo. Del. selected:Select and delete a Screen memo. ] Place check marks next to the Screen memos to delete ] I[Done] ] "Yes" ・ Press M[Menu] and select "Select all" or "Release all". Delete all:Delete all bookmarks. ] Enter the security code ] "Yes" [URL] Display the URL of the selected Screen memo. [Protect on/off] One on/off:Disable/Enable the protection for the selected Screen memo. Select on/off:Select a Screen memo and protect or unprotect it. ] Place check marks next to the Screen memos to protect ] I[Done]] "Yes" ・ Press M[Menu] and select "Select all" or "Release all". Unprotect all:Unprotect all Screen memos. ] Enter the security code ] "Yes" [Memory status] Display the number of Screen memos 184 i-mode/i-motion/i-Channel Screen Memo Detail Screen's Sub Menu Screen memo details screen ] M[Menu] ] Perform the following operations [Save image] Save an image contained in the Screen memo. Go to Step 2 in "Saving Images from a Site or Screen memo" (P186). [Show properties] URL:Display the URL of the displayed Screen memo. Page properties:Display the URL and the title of the displayed Screen memo. Certificates:If the displayed Screen memo is an SSL page, the SSL certificate is displayed. [Delete] Delete the Screen memo that is currently displayed. [Protect on/off] Protect or unprotect the displayed Screen memo. Note ・ Protected Screen memos cannot be deleted. Unprotect them before deleting. ・ Up to 10 Screen memos can be protected. The number of Screen memos that can be protected may vary depending on the data size. [Add to Phonebook] Save a phone number or mail address on the web page to the Phonebook.→P179 [Retry] Play a Flash movie or an animation contained in the Screen memo from the beginning. [Sound effect] Set whether to play sound effects of the Flash movie contained in the displayed Screen memo. On:The Flash movie sound effects will be played. Off:The Flash movie sound effects will not be played. [Edit title] Edit the title of the displayed Screen memo. Up to 12 full-pitch or 24 half-pitch characters can be entered for a title. i-mode/i-motion/i-Channel 185 Downloading Data from Sites You can download files or data such as images or melodies from sites and save them to the FOMA terminal. Save image Saving Images from a Site or Screen Memo You can save images contained in the displayed site or Screen memo to the terminal. ・ Obtained images will be saved in the "i-mode" folder in "My Picture" of the "Data box". ・ The format types of image file available to save are JPEG and GIF of up to 100Kbytes size. Example: To save the image displayed on a web page From the currently accessed site ] M[Menu] ] "Save image" image" ] Select an image 2 ■"Select To save the background image from a site Select "Save background". A savable image has a dotted border. 186 "Yes" i-mode/i-motion/i-Channel Note ・ Images cannot be saved if "Images" is set to "OFF". ・ Each image file name must be unique in the same folder. ・ Some images saved on the FOMA terminal may not properly display even if they are displayed on the site. ・ Some obtained images may not be displayed correctly. ・ Image files in JPEG, GIF, or Progressive JPEG* formats cannot be displayed after they are saved if the size (pixels) exceeds the following. However, they can be output to external devices such as being attached to mail. - JPEG image files that exceed 1600x1200 pixels - GIF or Progressive JPEG image files that exceed 800x600 pixels * Progressive JPEG is an image format that is used in the Internet. The image looks coarse at the beginning of the download and the image sharpness improves as the download progresses. i-melody Download Templates Downloading Melodies from Sites Downloading Templates from a Site ・ Downloaded melodies will be saved in the "i-mode" folder in "Melody" of the "Data box". From the currently accessed site ] Select a melody 1 After the download completes, a confirmation appears. "Save" 2 Play:Play the downloaded melody. File property:Display information about the downloaded melody. Back:Return to the site without saving the melody. You can download templates for Deco-mail. ・ Downloaded templates are saved in the "Template" (P138) of the Mail menu. From the currently accessed site ] Select a template 1 After the download completes, a confirmation appears. "Save" 2 Preview:Display the downloaded template. File property:Display information about the downloaded template. Compose mail:Use a downloaded template to create Deco-mail. Note ・ Download may not be possible depending on the site. ・ Each melody file name must be unique in the same folder. ・ Some downloaded melodies may not be played correctly. ・ Some downloaded melodies may have a section to be played already specified. These melodies will be played entirely in the playback, however, when the melody is set for a ring tone, only the specified part is played. Back:Return to the site without saving the template. 3 ・I[Done] To rename and save a file, select C[Edit] ] Rename the file ] Press I[Done]. Download Dictionaries Downloading Dictionaries from a Site ・ Downloaded dictionaries will be saved in "Download Dictionary" (P303). ・ Up to 10 dictionaries can be saved. However, no more than five dictionaries are available at one time. From the currently accessed site ] Select a dictionary 1 After the download completes, a confirmation appears. i-mode/i-motion/i-Channel 187 "Save" 2 View:Display information about the downloaded dictionary. Back:Return to the site without saving the dictionary. a saving destination 3 ・Select If you are only using four or fewer dictionaries, a confirmation whether to enable the downloaded dictionary appears. Select "Yes" to enable it. Note ・ Using Downloaded Dictionaries→P303 Add to phonebook:Add the selected phone number to the Phonebook. Go to Step 2 in "Saving Contacts to the Phonebook from Received or Dialed Calls" (P84). Note ・ The Phone To/AV Phone To function may not be available depending on the site. Mail To Function You can send mail to an Email address highlighted on a site page or in mail. Phone To/Mail To/Web To/i-αppli To function Using the Phone To/Mail To/ Web To/i-αppli To Functions When a phone number, mail address or URL is highlighted on a web page or in mail, you can use it to easily make a call, send i-mode mail or access the web site. ・ Phone To, AV Phone To, Mail To, or Web To function in mail sent from a PC may not be available. Phone To/AV Phone To Function Make a voice call (Phone To)/video call (AV Phone To) to the highlighted phone number at a site or in mail. Select a phone number ] Perform the following operations Make Call:Make a voice call. Video phone:Make a video call. Copy:Copy the selected phone number. 188 i-mode/i-motion/i-Channel a mail address 1 ・Select Go to Step 3 in "Creating and Sending i-mode Mail" (P131). Note ・ The Mail To function may not be available depending on the site. Web To Function Access a URL highlighted on a site page or in mail. a URL 1 ・Select When you access a URL shown in mail, press C[Connect] after Step1. Note ・ The Web To function may not be available depending on the site. ・ How a URL is displayed may vary depending on the site. ・ The Web To function may be available using a highlighted item other than a URL. i-αppli To Function You can start i-αppli from a URL highlighted on a site or in i-mode mail. ・ If a check mark is not placed next to "Site i-αppli to"(P233) or "Mail i-αppli to" in "Set i-αppli to", the i-αppli will not start. Select i-αppli information ] "Yes" Note ・ Some i-αppli, that immediately start directly from the site using the i-αppli To function, may not be saved. i-mode setting Configuring i-mode Settings Set the functions for i-mode or Message R/F. [Connection timeout] Set the time until the connection is automatically terminated if no response was returned due to network traffic.→P191 [Check new messages] Specify request items when using "Check new messages". ] Place check marks next to the items to check ] I[Done] Display Configuring Display Settings i-mode menu screen (P174) ] "i-mode setting" ] "Display" ] Perform the following operations [Images] Set whether to display images or Flash movies contained on site pages or Screen memos. [Sound effect] Set whether to play sound effects of Flash movies contained on sites or Screen memos. [Use phone info] When a Flash image is displayed on a site or in a Screen memo, information saved on the terminal may be required. Set whether to use the information from the phone in this case. [Font size] Set the font size for sites, Screen memos, or message text in Message R/F. Network Configuring Network Settings i-mode menu screen (P174) ] "i-mode setting" ] "Communication" ] Perform the following operations: i-mode/i-motion/i-Channel 189 [Scroll] Set the number of lines scrolled with each H press on sites, Screen memos, or Message R/F. [Message list] Set the display method of the Message R/F list screen. 1 line:Display only the subject in one line. 2 lines:Display the subject and received date and time in two lines. [Auto-display] Set how Messages R/F are displayed automatically.→P165 [Melody auto play] Set whether to automatically play a melody when a Message R/ F is displayed.→P165 Note ・ Images may not be displayed correctly even when "Images" is set to "ON". In this case, appears. ・ Even if "Sound effect" is set to "ON", some sound effects may not sound depending on the Flash movie.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res XMP Toolkit : 3.1-701 Modify Date : 2009:04:20 12:29:56-04:00 Create Date : 2009:04:20 19:42:19+09:00 Metadata Date : 2009:04:20 12:29:56-04:00 Creator Tool : Adobe Illustrator CS2 Format : application/pdf Title : L-03A_English_Cover_1.0 Document ID : uuid:dc7df98e-8300-42b5-a3f4-464685d95078 Instance ID : uuid:b1fb9643-8f0e-4e04-853a-b0a472f13842 Producer : Adobe PDF library 7.77 Has XFA : No Page Count : 73 Creator : Adobe Illustrator CS2EXIF Metadata provided by EXIF.tools