LG Electronics USA SA565JP LASER PROJECTOR User Manual

LG Electronics USA LASER PROJECTOR

Contents

User Manual 3

69Interactive Function Interactive FunctionTo Connect the Interactive Pen to the PC and a PC USB port.Pairing#CAUTIONy Up to two pens can be used at the same time.y Pairing is not available when one of the paired pens is in use.y y You must install the WizTeach program in the CD provided with the accessories on your PC before using the Annotation Software .y power mode. Press any button to return the pen to normal mode.y Use the remote control within the specified range (see "Operating Range with device outside the coverage area or if there are obstacles within the coverage area.y such as a microwave oven and wireless LAN operate in the same frequency band y Make sure not to block the image when using the interactive pen.Connect the interactive dongle to the projector's INTERACTIVE port.(For SA565 only)
70Interactive Function Function/ Button Description❶Power Button Turns the interactive pen on/off.❷Used for pairing.❸Functions the same as a right mouse button.❹Functions the same as a left mouse button.❺USB charging port Charges the product using the charging cable.❻Eyelet for strap Connects the strap to the interactive pen.❼LED IndicatorsShows the battery status.Shows the pen status.❽Firmware upgrade portmaintenance.❾Pen tip❺❻❽❾❼Back❶❷❸❹FrontUsing The Interactive PenInteractive Pen and Button(For SA565 only)
71Interactive Function Using the Interactive Pen ButtonFunction DescriptionLeft Mouse Click Press the button or push the Pen tip.Right Mouse Click Press the button.Enter Fixed modeGo to Interactive and set Pairing Mode to Fixed. Then, press and hold the button more than three seconds within ten seconds.Enter Open mode Press both the pen's button and button simultaneously for 3 seconds.Wake Up Press any one of the button, button, or button. Or, push the pen tip.y Make sure that the interactive pen is not pointing toward the screen when entering each mode.(For SA565 only)#CAUTIONy If there are foreign objects or dust on the lens at the tip of the interactive pen, gently wipe with a cotton swab.y Foreign objects or dust on the lens surface may cause malfunction of the interactive pen.
72Interactive Function #ZDUQLQJy Do not replace or repair the battery yourself.y To charge the interactive pen, use the charging cable provided to connect the pen to USB port of the PC.To Charge the Interactive PenTo charge the battery, connect the interactive pen to the PC with the charging cable. (Check that the PC is turned on before connection.)The battery light stays on during charging and will turn off when charging is complete.When charging is complete, disconnect the charging cable in order to use it. Alternatively, use the interactive pen while connected by the charging cable if charging is not complete.y Warning message (low battery) - When the battery voltage is 3.6 V or lower, the low battery warning message is displayed. The interactive pen will message is displayed.- The interactive pen may not work when the battery level is 3.4 V or lower.y When you use the pen for the first time, charge the battery for at least 3 hours. when it is continuously used, or four weeks in standby mode.(For SA565 only)
73Interactive Function Pen OperationLED Indicators (LED 1) (LED 2)Charging battery The green light is on -Battery charging required⢫ⅳᖛ#OHG#7ⶲᩲᎎ#4㜶◓#༆Ჿ⠮ -Open Mode - Searching a projector to connect-The green light quickly - Searching a projector to connect-second.Attempting to pair - quickly.Enter Open mode, or pairing is complete-three times.Pairing failed - The pen is connected to the projector -three seconds.When the pen is pointing the projector screen -quickly.Entering low power modeonce.once.y of the interactive pen.Description of LED Interactive Pen IndicatorsOHG#4 OHG#5(For SA565 only)
74Interactive Function To Replace the Pen tipTurn the pen tip to the right to remove it from the interactive pen, as shown in the figure below.Turn the pen tip to the left to install it onto the interactive pen, as shown in the figure below.Open CloseHow to Use the StrapUse the strap to prevent dropping the interactive pen. Use the pen safely so as not to cause injury or damage to nearby objects.(For SA565 only)#CAUTIONy Be sure to wear the strap on your wrist when using the interactive pen.y Store the interactive pen in the hard case.
75Interactive Function Operating Range with Interactive Peny y You can use two Interactive pens at the same time.y Actual operating range may slightly differ from the diagram.y If the projector screen darkens due to the surrounding environment, the operating range of the interactive pen may be affected.Operating rangeAngle Distance 9 m 7m 5mScreen(For SA565 only)AngleDistanceAngleDistance
76Interactive Function (For SA565 only)To Use the Interactive Pen Functions4#Press the MENU button.5#Select OPTION using the 󱛨 and 󱛩 6#Select Interactive using the 󱛨, 󱛩, 󱛦 and 󱛧- To return to the previous screen, press the ᰳ button.7#Select which item you want using the 󱛨, 󱛩, 󱛦 and 󱛧 buttons, and press 0##After the settings have been changed, press the Close button to close the window.The interactive function settings are as follows:Item DescriptionInteractiveThere are four function modes: Off/Single, Pen/Double, or Pen/Multi Touch.y Off: Disables the interactive pen function.y Single Pen: Use one interactive pen.y Double Pen: Use two interactive pens at the same time. (It is recommended to install the WizTeach program provided on your PC prior to use.)y Multi Touch: Use various functions, such as zoom in, zoom out, or rotation, with two interactive pens. (Supported in Windows 7 only)channelYou can select a channel in Auto or Manual mode. y Auto: A channel is automatically selected.y Manual: Select a channel manually.Set Channel Pairing Modey Open mode: Follow the on-screen instructions to set the interactive pen to Open mode.(While the interactive pen is pointing at a screen, the pen can be used with any projector.)y  (The interactive pen can be used only with a paired projector.) Ͱ237,21ؒ /DQJXDJHؒ 6HW,'ؒ 3-7PRGHؒ .H\6WRQHؒ %ODQN,PDJHؒ $XWR3RZHUؒ ,QWHUDFWLYH,QWHUDFWLYH6LQJOH3HQ&KDQQHO$XWRؒ 6HW&KDQQHO3HQ6HWWLQJؒ 3DLULQJ0RGH2SHQ&ORVHy Make sure that the Computer/Laptop screen is displayed on the projector screen.
77Interactive Function Troubleshooting the Interactive Pen FunctionProblem TroubleshootingI can't use or connect the interactive pen.Check that the interactive pen function is turned on.Check that the interactive dongle is connected to the projector.Press the interactive pen's power button to check that the power is turned on.Check that the Interactive pen is paired.Make sure that the computer screen is displayed on the projector screen.The interactive pen does not work from time to time. Connect the interactive USB cable to another USB port and try to use the interactive pen again.The projector screen looks abnormal when the interactive pen function is enabled.Check that the projector and computer are connected properly.The interactive pen is showing in a different position.Make sure that the computer screen is displayed on the projector screen.The interactive pen does not work smoothly.Check whether the projector is too far away from the computer or if there are too many obstacles between them. Check whether too many applications are running on the PC.(It is not recommended to run other applications while running the interactive program (WizTeach software).)The LED is not working. #$%;=on the pen once every second, indicating a battery issue.The battery is low.Charge the interactive pen.(For SA565 only)
78Serial Communication Function Serial Communication FunctionUsing Serial CommunicationIf the projector is connected to a PC through an RS-232C cable, you can use the PC to control functions of the projector such as power On/Off or input selection, etc.It cannot be used with the Ez-Net Manager concurrently. For serial communication, use RJ45 Off in the Network Settings.Establishing Serial CommunicationConnect the RS-232C (serial connector) of the PC to the RS-232C connector at the back of the projector.You need to purchase a cable to connect the RS-232C connectors as it is not provided as an accessory.2345678PCRXDTXDDTRGNDDSRRTSCTSRXD 9615TXDDTRGNDDSRRTSCTSProjector2345678PC Projector
79Serial Communication Function Communication Protocol[Cr] The first command to control the projector * [Command2]: The second command to control the * [Set ID]: Used to select the set to control; ID can be granted for each set listed in the Special Menu, control all the sets. In the command line, a * [Data]: Used to send data needed for the commands mentioned above. If it is in ASCII code, 2 characters are sent.* If the data is ‘FF’, it means data read mode.* [Cr]: Carriage Return* [ ]: ASCII code character corresponding to “Space Bar” separating command, Set ID, and data.Communication Parameter Setup* If a set receives the data successfully, it returns information from the projector indicating the current status of the projector if it is in data read mode. The projector itself will return the data from the PC if it is in data write mode.3. Error Acknowledgement* If a set receives an abnormal piece of data such as a non-supported function or there is a       format. illegal code (This command is not supported.)(This function is not supported.)(Wait and try again after a while.)Data Structure                        29  33  3D  47    5B  22  32  42 2A 52 34 62 3E 72   52 92 5C  23  33  43 2B 53 35 63 3F 73 49  53 93 5D  24  34 22 44 2C 54 36 64  74 4A  54 94 5E  25  35 23 45 2D 55 37 65  75 4B  55 95 5F  26  36 24 46 2E 56  66 42 76 4C  56 96   27  37 25 47 2F 57 39 67 43 77 4D  57 97      26    3A  44  4E    62  29  39 27 49  59 3B 69 45 79 4F  59 99 63       32  3C  46    5A  64 2345679 
80Serial Communication Function Command Reference ListCommand 1 Command 2 Data01. Power k a 02. Aspect Ratio kc *03. Blank Image k d 04. Contrast k g 05. Brightness k h 06. Color k i 07. Tint k j 08. Sharpness k k 09. OSD Select k૵10. Key Lock k m 11. Color Temperature k u 12. Black Level n m 13. Energy Saving n p ?@!" ju 15. Input b *16. Key mc *17. Picture Mode n s 18. Mute k e 19. Volume k f 20. Monitor Out n r y 
81Serial Communication Function 01. Power (Command: ka)ފ Powers the set on/off.When Magical Mirroring or Wi-Fi Screen Share is running, only the Power function is available to use.Transmission[k][a][][Set ID][][Data][Cr]Ackފ Shows the power on/off status.Transmission[k][a][][Set ID][][FF][Cr]Ack* As with other functions, if data is transmitted format, the current status of each function is returned as a feedback in Ack data.02. Screen size (Command: kc)ފ Adjusts the screen size.Transmission[k][c][][Set ID][][Data][Cr]Ack03. Blank Image (Command: kd)ފ Enables/disables the blank image. Transmission[k][d][][Set ID][Data][Cr]Ack
82Serial Communication Function 04. Contrast (Command: kg)ފ Adjusts the contrast.Disabled when the Black Mode is selected.Transmission[k][g][][Set ID][][Data][Cr]* See the data structure.Ack05. Brightness (Command: kh)ފ Adjusts the brightness.Disabled when the Black mode is selected.Transmission[k][h][][Set ID][][Data][Cr]* See the data structure. Ack06. Color (Command: ki)ފ Adjusts the color. Disabled when the Black mode is selected.Transmission[k][i][][Set ID][][Data][Cr]* See the data structure. Ack07. Tint (Command: kj)ފ Adjusts the tint. Disabled when the Black mode is selected.Transmission[k][j][][Set ID][][Data][Cr]* See the data structure.Ack
83Serial Communication Function 08. Sharpness (Command: kk)ފ Adjusts the sharpness. Disabled when the Black mode is selected.Transmission[k][k][][Set ID][][Data][Cr]* See the data structure. Ack10. Key Lock (Command: km)ފ Enables the lock function for the remote control and local keypad.Transmission[k][m][][Set ID][][Data][Cr]Ack* This function is used when the remote control is not being used. If remote control lock is on, none of the buttons of the local keypad and remote control will work.11. Color Temperature (Command: ku)ފ Adjusts the color temperature.Disabled when the Black mode is selected.Transmission[k][u][][Set ID][][Data][Cr]CoolWarm  AckCoolWarm 09. OSD Select (Command: kl)ފ Selects OSD On/Off.Transmission[k][l][][Set ID][][Data][Cr]Ack
84Serial Communication Function 13. Energy Saving (Command: np)ފ Sets the energy saving mode.Transmission[n][p][][Set ID][][Data][Cr]Ack?@!"[!\\$]^_ފ Adjusts the video position in RGB mode and minimizes image shaking.Transmission[j][u][][Set ID][][Data][Cr]Ack15. Input Select (Command: xb)ފ Select the input signal of the set.Transmission  Ack   12. Black Level (Command: nm)ފ Adjusts the black level.Disabled when the Black mode is selected.Transmission[n][m][][Set ID][][Data][Cr]Ack
85Serial Communication Function 16. Key (Command: mc)ފ Sends a key code of the IR remote control.Transmission[m][c][][Set ID][][Data][Cr] .Ack20. Monitor Out (Command: nr)ފ Transmission[n][r][][Set ID][][Data][Cr]Ack18. Mute (Command: ke)ފ Enables/disables the mute function.Transmission[k][e][][Set ID][][Data][Cr]Ack19. Volume (Command: kf)ފ Adjusts the volume.Transmission[k][f][][Set ID][][Data][Cr]* See the data structure. Ack17. Picture Mode (Command: ns)ފ Sets the picture mode.Transmission[n][s][][Set ID][][Data][Cr] Cinema  Ack Cinema  
86Serial Communication Function Key Name Key Code Key Name Key Codeޟ Blue ه >  < Mic POWER  USBIINPUT MUTE MENU  PAGE ޟ PAGE ޠ   ENERGY SAVING  STILL RATIO  EXIT 弁  PICTURE  AUTO2Q.MENU 3SLEEP4 AV MODE  5VOL +  6VOL -  7 Red  Green  9Yellow <Key Code>
87MAINTENANCEMAINTENANCEClean your projector to keep it in optimal condition.CleaningCleaning the LensIf there is any dust or staining on the lens surface, you must clean the lens.Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of clean-ing agent onto a swab or soft cloth to lightly rub the lens.into the lens if the product is sprayed directly onto the lens.Cleaning the projector casethe power cord.To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish the lens.Do not use alcohol, benzene, thinners or other chemicals, which may damage the case.
88MAINTENANCEUpdating SoftwareWhen software update is required, run the software update to obtain the latest software version. You can manually check for and download any software updates.1 Press the MENU button.2 Select SUPPORT and go to Software Update.Item DescriptionSoftware Update Enable this option.When an update file is found, it is downloaded automatically.When the update file is finished downloading, a software update window appears.Check Update Versionthe latest update version, you can proceed with the update manually.y The update service to get the latest version is provided through an Internet connection.y If the software is not updated, some functions may not work well.
89%`\$[`?{{_Standard Frequency RangeModulation Output Power(Typical)Data RateAntenna Gain(Typical)Occupied bandwidth y Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. ;"|} (For SA565 only)y The interactive pen communicates with the interactive a projector's interactive dongle.Frequency Range Modulation Transmission power Receive sensitivity Data Rate 
90SPECIFICATIONSSPECIFICATIONSModel SA560 (SA560-JP) / SA565(SA565-JP)  Aspect ratio Panel size (mm) Projection distance (Video size) Ratio of upward projection Working range of the remote control 6 mAudio output 7 W + 7 WReception type  Width (mm) Depth (mm) Weight (kg) -phone Jack thickness: 3.5 mmUSB Device POWER Operation environ-mentTemperatureOperation Storage Relative humidityOperation Storage 
91SPECIFICATIONSHDMI/DVI-DTV/WiDi mode supportedResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)  59.94 576p  37.5 44.96 59.9445   33.75 56.25 67.432 59.9467.5 67.432 59.93927 2426.97 23.97633.75  29.97Open Source Software InformationTo obtain the source code under the GPL, LGPL, MPL and other open source licenses, which is contained in this prod-uct, please visit http://opensource.lge.com.In addition to the source code, all refer-enced license terms, warranty disclaim-ers and copyright notices are available for download.lge.com to request the software’s open source code installed on the projector within three years of purchase, we will send you a CD-ROM. You will only be charged a minimum for packaging and delivery.y If an invalid signal is input into the projector, it will not be displayed prop-erly on the screen or a message such as “No Signal” or “Invalid Mode” will be displayed.y -tion of PC monitor).y PC sync signals supported: Separate Sync.y for the best picture quality.y  may not be supported depending on the PC type.Component Port ConnectionSignal Component480i / 576i o480p / 576p o720p / 1080i o1080p oSupported Monitor DisplayResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)    59.94            59.979 65.3 
ederal Communications Commission(FCC) Statement) Federal Communications Commission(FCC) StatementYou are cautioned that changes or modifications not expressly approved by You are cautioned that changes or modifications not expressly approved by the part responsiblethe part responsiblefor compliance could void the user’s authority to operate the equipmentfor compliance could void the user’s authority to operate the equipmentfor compliance could void the user s authority to operate the equipment.for compliance could void the user s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.Class B digital device, pursuant to part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful These limits are designed to provide reasonable protection against harmful it f i id tili tlltiit f i id tili tlltiinterference in a residential installation.interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a However, there is no guarantee that interference will not occur in a particular installationparticular installationparticular installation.particular installation.If this equipment does cause harmful interference to radio or television If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the the user is encouraged to try to correct the interference by one or more of the following measures:interference by one or more of the following measures:--. Reorient or relocate the receiving antenna.. Reorient or relocate the receiving antenna.--. Increase the separation between the equipment and receiver.. Increase the separation between the equipment and receiver.--. Connect the equipment into an outlet on a circuit different from that to . Connect the equipment into an outlet on a circuit different from that to which the receiver is connectedwhich the receiver is connectedwhich the receiver is connectedwhich the receiver is connected--. Consult the dealer or an experienced radio/TV technician for help.. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:Operation is subject to the following two conditions:1) this device may not cause harmful interference, and1) this device may not cause harmful interference, and2) this device must accept any interference received, including interference 2) this device must accept any interference received, including interference that may cause undesired operation of the device.that may cause undesired operation of the device.Id lId lIndoor use onlyIndoor use onlyFCC Caution: Any changes or modifications not expressly approved by the FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate party responsible for compliance could void the user's authority to operate this equipment.this equipment.
The model and serial number of the projec-tor are located on the back or on the side of the projector. Record them below should you ever need service.MODELSERIAL

Navigation menu