Lexmark Pro710 Users Manual Series Quick Reference Guide
C 720 lmadiuser
PRO710 to the manual 9d126007-adf8-4780-8085-958fbffcc0ac
2015-01-23
: Lexmark Lexmark-Pro710-Users-Manual-269143 lexmark-pro710-users-manual-269143 lexmark pdf
Open the PDF directly: View PDF .
Page Count: 55
Download | |
Open PDF In Browser | View PDF |
Pro710 Series Quick Reference Guide December 2011 www.lexmark.com Important Message About Cartridge Recycling! Please Read Before Opening Your Inkjet Cartridge Box At Lexmark, we take our commitment to the environment seriously, and we encourage our customers to participate in our easy, no-cost method for returning empty Lexmark cartridges to Lexmark for proper recycling. We will insure that cartridges are properly handled with zero waste to landfills. Go to www.lexmark.com/recycle. Follow instructions to request postage-paid bags. Bags usually arrive within 7–10 days. printer except as otherwise provided below, and (2) pass this license/agreement to any subsequent user of this printer. The patented Lexmark inkjet cartridges and their contents are licensed subject to a restriction that they may be used only once. After this single use, the license to use the print cartridges and their contents terminates, and you agree to return them only to Lexmark for recycling. Replacement inkjet cartridge(s) sold without these terms are available through www.lexmark.com and may be refilled by you, or a third party, as the only cartridge alternative to be used with the licensed printer. Important safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements. CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ‑11) cord provided with this product or a UL Listed 26 AWG or larger replacement when connecting this product to the public switched telephone network. Place the empty Lexmark-branded inkjet cartridge(s) in the postage-paid return bag, and then seal the bag. If you’re sending single-color tanks, we recommend that you send at least two at a time to maximize the environmental benefits. CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it. CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. Mail the bag to Lexmark’s recycling partner. The bag is preaddressed. Visit www.lexmark.com/recycle to learn more about recycling. Lexmark-branded cartridges are always made with all new parts, though components may contain recycled material. For warranty returns, call 1-800-395-4039. This patented printer is licensed for, and designed to work with, only genuine Lexmark inkjet cartridges for the life of the patented printer. You agree to: (1) use only genuine Lexmark inkjet cartridges with this Contents Contents 3 Copying.........................................................................................25 Important safety information.........................................................2 Tips for copying..................................................................................................................25 About your printer..........................................................................5 Making a two‑sided (duplex) copy automatically...............................................................25 Finding information about the printer.................................................................................5 Canceling copy jobs............................................................................................................26 Minimizing your printer's environmental impact.................................................................5 Scanning.......................................................................................27 Printer models......................................................................................................................6 Printer features....................................................................................................................6 Setting up the printer...........................................................................................................6 Understanding the parts of the printer..............................................................................12 Using the printer control panel..........................................................................................13 Using flash drives................................................................................................................14 Ordering and replacing supplies....................................................16 Ordering ink cartridges.......................................................................................................16 Replacing ink cartridges......................................................................................................16 Maintaining ink cartridges..................................................................................................18 Using the printer software............................................................19 Minimum system requirements.........................................................................................19 Installing the printer software............................................................................................19 Using the Windows printer software.................................................................................19 Using the Macintosh printer software...............................................................................20 Making copies.....................................................................................................................25 Tips for scanning.................................................................................................................27 Scanning to a local computer.............................................................................................27 Scanning to a flash drive or memory card..........................................................................27 Scanning directly to e‑mail using the printer software......................................................27 Scanning to a PDF...............................................................................................................28 Canceling scan jobs.............................................................................................................28 E-mailing.......................................................................................29 Sending e-mail....................................................................................................................29 Canceling an e‑mail............................................................................................................29 Setting up the printer to fax..........................................................30 Step 1: Connect the printer to the telephone line.............................................................30 Step 2: Check the dial tone.................................................................................................37 Step 3: Set your fax name and fax number........................................................................37 Step 4: Set the printer to receive faxes automatically or manually...................................37 Step 5: Set the number of rings..........................................................................................38 Printing.........................................................................................22 Step 6: Create a contact list................................................................................................38 Printing a document...........................................................................................................22 Faxing...........................................................................................39 Printing on both sides of the paper (duplexing) automatically..........................................22 Printing photos from a flash drive......................................................................................23 Printing documents from a flash drive...............................................................................23 Sending faxes......................................................................................................................39 Receiving faxes...................................................................................................................39 Canceling print jobs............................................................................................................23 Wireless networking.....................................................................41 Printing from a mobile device............................................................................................24 Information you will need to set up the printer on a wireless network.............................41 Installing the printer on a wireless network.......................................................................41 What is Wi‑Fi Protected Setup?.........................................................................................41 Contents Configuring Wi‑Fi Protected Setup manually.....................................................................42 Troubleshooting............................................................................43 Notices.........................................................................................52 Edition notice.....................................................................................................................52 Index............................................................................................53 4 About your printer 5 Minimizing your printer's environmental impact About your printer Finding information about the printer The Quick Reference Guide contains instructions on adding your printer to a wireless network, setting up a fax connection, and accomplishing common printer tasks like printing, copying, scanning, and faxing. It also includes information on troubleshooting printer setup issues as well as solving basic networking and faxing problems. For additional information, see the following: What are you looking for? Initial setup instructions Find it here • Quick Setup Sheet • Hardware Setup Wizard1 For Windows users After installing your printer, you can access the User's Guide from the printer program folder: 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 3 Select User's Guide. For Macintosh users 1 From the Finder, navigate to: Applications > select your printer folder 2 Double‑click User's Guide. Software Help installed automatically with the printer software.2 Click Help from any printer software program or application. The latest supplemental information, updates, Support Web site—http://support.lexmark.com online customer support, and telephone support 1 Conserving energy • Activate Eco-Mode. This feature sets the screen brightness to low and sets the printer to change to Sleep mode after the printer is left idle for 10 minutes. • Select the lowest Sleep timeout. The Sleep feature puts the printer in a minimum‑power standby mode after the printer has been idle for a set amount of time (the Sleep timeout). Additional setup and instructions for using the Comprehensive User's Guide installed automatically with printer the printer software.2 Help using the printer software We are committed to protecting the environment and are continually improving our printers to reduce their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's environmental impact even further. Available on the installation software CD. • Share your printer. Wireless/network printers allow you to share a single printer among multiple computers, thus conserving energy and other resources. Conserving paper • Print more than one page image on one side of the paper. The Pages per Sheet feature allows you to print multiple pages on one sheet. You can print up to 16 page images on one side of a sheet of paper. • Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or automatically (depending on your printer model). • Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print Preview dialog, or the printer display (depending on your printer model). • Use recycled paper. • Reduce the margins of documents to be printed. • Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save them to a computer program, application, or flash drive for presentation. Conserving ink • Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than normal and are ideal for printing documents that are mostly text. • Use font types and font settings that require less ink. Most programs or applications let you adjust the darkness of the colors. • Use high‑yield cartridges. These cartridges let you print more pages. Recycling • Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To return an ink cartridge, go to www.lexmark.com/recycle, and then follow the instructions to request a postage‑paid bag. 2 Available on the installation software CD and on the Lexmark Support Web site at http://support.lexmark.com. • • • • Recycle the product packaging. Recycle your old printer instead of throwing it away. Recycle paper from discarded print jobs. Use recycled paper. About your printer To read the Lexmark Environmental Sustainability Report, visit www.lexmark.com/environment. Note: Your printer may not come with some of these programs or some of the functions of these programs, depending on the features of the printer that you purchased. 6 Setting up the printer 1 Unpack the printer. Printer models The installation software CD that came with your printer works for the following printer models: • Lexmark Pro715 • Lexmark Pro719 Printer features Depending on the model, your printer comes with features that will help you manage and accomplish printing and imaging tasks: • Wireless or Ethernet networking—Print and scan from anywhere in your home or office over a secure wireless or Ethernet network, as well as share the printer among multiple computers. • Intuitive touch screen—Use the full‑featured color touch screen for fast, easy access to all the printer menus. The large screen also allows you to view and print photos directly from your digital camera or memory device without using a computer. • Print—Print documents and PDFs quickly from a computer or from a USB flash drive. Built‑in two‑sided printing lets you save money and the environment. • Copy—Copy documents and photos with one‑touch, computer‑free black or color copying. Enjoy 25% to 400% reduction and enlargement capacity. • Scan—Scan documents and photos fast and easily with the high‑resolution scanner. Easily scan to a memory device or to multiple laptops or computers over a secure wireless network with up to 1200 dpi optical resolution. • Fax—Do standalone black and color faxing at 33.6Kbps modem speed. Other fax features include 99 speed dials, automatic redial, junk fax blocking, and caller ID. • Photo printing—Print high‑quality, long‑lasting photos directly from digital memory cards, PictBridge‑enabled digital cameras, or USB flash drives. • SmartSolutions—Simplify printer tasks that you frequently repeat by creating and customizing your printer solutions. Using the SmartSolutions toolkit on the Web, you can choose the printer tasks that you often perform, apply your custom settings, and download them to your printer as shortcuts that you can easily access anytime. You can also customize your printer with solutions that display your online calendars, online photo albums, RSS feeds, and more. • Shortcuts—Save a set of frequently used printer settings available for a given task and then assign a shortcut name and shortcut number to it. When you want to perform a task with those settings, you can simply select the shortcut number on the printer instead of going through the usual process of adjusting the settings and options. • Eco‑Mode—Save energy by activating Eco‑Mode. It automatically dims the printer display light and puts the printer into Sleep mode after a specified period of inactivity. Notes: • Do not attach the USB cable until prompted to do so. • Place the printer near the computer during setup. If you are setting up on a wireless network, then you may move the printer after setup is complete. • Contents may vary by model and region. About your printer 7 2 To initiate printer setup using a computer, insert the installation software CD, or download the printer a Remove the language sheet holder from the printer control panel. driver. 1 With a CD or DVD drive (Windows/Macintosh) 2 Without a CD or DVD drive or for Linux Download the printer driver from www.lexmark.com. xxxx xx xxxxxxxx xxxx xx xxxxx xxxxxxxx xxxx xx xxxxxxxx xxxx xx xxxxx xxxxxxxx b Insert the preferred language sheet into the language sheet holder, and then attach the language sheet holder to the printer control panel. 1 Note: If the installation screen does not appear after a minute, then see “Installation screen did not appear during installation” on page 43. 3 Remove tape and packing material from all areas of the printer. xxxx xx xxxxxxxx xxxx xx xxxxx xxxxxxxx xxxx xx xxxxxxxx xxxx xx xxxxx xxxxxxxx c Close the scanner unit. 5 Pull the paper tray completely out of the printer. 4 If necessary, lift the scanner unit to replace the language sheet on the printer control panel. 2 About your printer 8 6 Move the paper guides to the sides. 8 Load paper and adjust the paper guides. 1 1 2 Note: Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams. 9 Insert the paper tray. 2 3 7 For A4‑ or legal‑size paper, extend the paper tray. 1 10 Connect the power cord only. Note: Do not attach the USB cable yet. 2 About your printer 9 11 Make sure the printer is on. 14 Set the country or region, and then press . Country/Region United States Albania Algeria Please choose a country or region and press OK 15 Set the date, and then press . Set Date 18 12 Set the language on the printer control panel, and then press . / 01 / 2011 Press OK when complete. 16 Set the time, and then press . Set Time 05 13 Confirm the language, and then press . Language Selection You have chosen English as the language for your Printer Are you sure? Yes : 55 Press OK when complete. No AM About your printer 10 17 Set the time zone, and then press 20 Enter your name or company name, and then press . . Your fax name identifies you as the sender in all your sent faxes. Time Zone (UTC-05:00) Eastern Time (USA/Ca... Fax Name (UTC-06:00) Central Time (USA/Ca... (UTC-07:00) Mountain Time (USA/C... Please choose a time zone and press OK Enter Fax Name and press OK 18 To configure basic fax functions, press the arrow buttons until Now is highlighted on the display, and then press 21 Configure other advanced fax settings later in the software installation. . Lexmark Pro710 Series Installation Configure Advanced Features You can now print, but there are additional steps required to access all the features of your device. Fax Setup Get my printer ready to scan directly to my computer Do you want to set up fax now? Configure Lexmark SmartSolutions and standalone email Get my printer ready to send and receive faxes Now Later What will I be missing if I don’t do this now? How can I do this later? Quit ? 19 Enter your fax number for the printer, and then press in all your sent faxes. Fax Number Enter Fax Number and press OK . Your fax number identifies you as the sender Continue About your printer 22 Open the printer. 11 24 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place. 23 Unpack the ink cartridges. Notes: • Install the color ink cartridges first. Then, use two hands to install the black cartridge. • Install the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air. 25 Close the printer. V725 w INK COM 150, PATIBILIT 150, 150A, Y CHART 150A, 150XL, 150XL, 150XLA 150XLA , 155, , 155, 155A, 155A 155XL, Cyan xx xx xx xx xx xx xx XX XX 155XLA Black MAC: 150, 150, 150A, 150A, 150XL, 150XL, 150XLA 150XLA , 155, , 155, 155A 155A XX XX XX MT/MN: 4449-70E XX Magenta Yellow www.lexm ark.com The customer support label that is located near the ink cartridge access area contains the ink compatibility information, model number, product Web site, and technical support number. About your printer 12 26 Extend and flip out the paper stop. Understanding the parts of the printer 1 2 3 4 2 5 1 6 27 From the printer control panel, press to print an alignment page. 7 11 10 Notes: • • • • • The alignment page prints. Do not remove the page until printing is finished. The alignment page may take a while to print. Streaks on the alignment page are normal and not an indication of a problem. The alignment page that prints may differ from the one shown. Recycle the alignment page. 9 8 Use the To 1 Scanner cover Access the scanner glass. 2 Scanner glass Scan, copy or fax photos and documents. 3 Automatic Document Feeder (ADF) Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents. 4 ADF paper guide Keep paper straight when feeding into the ADF. 5 ADF tray Load original documents into the ADF. This is recommended for scanning, copying, or faxing multiple-page documents. Note: Do not load postcards, photos, small items, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 6 ADF output tray Hold documents as they exit from the ADF. 7 PictBridge and USB port Connect a PictBridge‑enabled digital camera or a flash drive to the printer. 8 Printer control panel Operate the printer. 9 Paper tray Load paper. 10 Paper stop Catch the paper as it exits. 11 Paper exit tray Hold paper as it exits. About your printer 13 16 12 13 17 Use the 15 20 To Printhead access area Install the printhead. Note: The carrier moves to the printhead access area when no printhead is installed in the printer. EXT LINE 14 21 Jam clearance cover Remove jammed pages. Using the printer control panel EXT LINE 2 1 3 4 5 18 21 20 19 Use the To 12 Scanner unit Access the ink cartridges. 13 Ink cartridge access area Install, replace, or remove the ink cartridges. 14 Ethernet port Connect your printer to a computer, a local network, an external DSL, or a cable modem. 15 USB port Connect the printer to a computer using a USB cable. Warning—Potential Damage: Do not touch the USB port except when plugging in or removing a USB cable or installation cable. 16 LINE port 7 Use 1 Power Connect the printer to an active telephone line (through a standard wall jack, DSL filter, or VoIP adapter) to send and receive faxes. To • Turn the printer on and off. • Switch to Sleep mode. Note: When the printer is on, press and hold 2 17 EXT port Connect additional devices (telephone or answering machine) to the printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer, and if this connection method is supported in your country or region. Note: Remove the plug to access the port. 18 Power supply with port 19 Duplex unit Connect the printer to a power source using the power cord. • Print on both sides of a sheet of paper. • Remove paper jams. Display Note: The display is turned off in Sleep mode. 6 to switch to Sleep mode. Press for three seconds to turn off the printer. View: • Printer status • Messages • Menus 3 Arrow buttons Navigate to menu or submenu items that appear on the display. 4 Home Navigate from any level in the menu back to the home screen. About your printer 5 14 Use To Keypad In Copy mode or Photo mode: Enter the number of copies or prints you want to make. In Fax mode: • • • • 6 7 Back Select 10 Dial tone Dial the telephone number manually using the keypad before sending the fax. 11 Address Book Access fax numbers from a saved list of numbers. 12 Color Switch to color mode. 13 Black Switch to black‑and‑white mode. 14 Start Start a job, depending on which mode is selected. 15 Cancel Enter fax numbers. Operate an automated answering system. Select letters when creating a Speed Dial list. Type numbers to enter or edit the date and time shown on the display. • Return to the previous screen. • Exit from one menu level to a higher one. • Select menu options. • Save settings. • Feed or eject paper. Press and hold the button for three seconds to feed or eject paper from the printer. • Cancel a print, copy, scan, or fax job in progress. • Exit from a menu level of the Copy, Scan, Fax, Photo, or File Print menu to the top level of a menu. • Exit from a menu level of the Setup menu to the top level of the previous mode. • Clear current settings or error messages, and return to default settings. 8 Redial Display the last number dialed. Press the left or right arrow button to view the last five numbers dialed. 9 Pause Insert a three-second pause in a fax number to wait for an outside line or get through an automated answering system. Enter a pause only when you have already begun entering the number. 16 Network indicator Check the network connection status of your printer and access the network settings. 17 Wi‑Fi indicator 18 Eco‑Mode Check the wireless connection of your printer. • Change to Sleep mode after the printer is left idle for 10 minutes. • Set screen brightness to low. Using flash drives Supported file types Documents: • .pdf (Adobe Portable Document Format) About your printer 15 Images: • .jpg, .jpeg, .jpe (Joint Photographic Experts Group) • .tiff, .tif (Tagged Image File Format) Using a flash drive with the printer Make sure the flash drive contains files that are supported by the printer. For more information, see “Supported file types” on page 14. 1 Insert a flash drive into the USB port. Notes: • The flash drive uses the same port that is used for a PictBridge camera cable. • An adapter may be necessary if your flash drive does not fit directly into the port. Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur. 2 Follow the instructions or select from available options on the printer display. Note: If the printer does not recognize the memory device, then remove and reinsert it. Ordering and replacing supplies 16 Notes: Ordering and replacing supplies • To get more ink, order high‑yield ink cartridges. • Depending on your country or region, you may get the ink cartridges individually or in packs. • You can order a mix of standard ink cartridges and high‑yield ink cartridges, depending on your Ordering ink cartridges needs. Lexmark Pro710 Series except Pro719 Item Return Program Cartridge1 Regular cartridge2 Black cartridge 150 Not available High‑yield black cartridge 150XL, 155XL 150XLA Yellow color cartridge 150 Not available High‑yield yellow color cartridge 150XL 150XLA Cyan color cartridge 150 Not Available High‑yield cyan color cartridge 150XL 150XLA Magenta color cartridge 150 Not available High‑yield magenta color cartridge 150XL 150XLA 1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling. 2 Available only on the Lexmark Web site at www.lexmark.com. Lexmark Pro719 model Item Return Program cartridge1 Regular cartridge2 Black cartridge 160 Not available High‑yield black cartridge 160 XL 160 XLA Yellow color cartridge 160 Not available High‑yield yellow color cartridge 160 XL 160 XLA Cyan color cartridge 160 Not available High‑yield cyan color cartridge 160 XL 160 XLA Magenta color cartridge 160 Not available High‑yield magenta color cartridge 160 XL 160 XLA 1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling. 2 Available only on the Lexmark Web site at www.lexmark.com. • • • • • Check the yield rate on the ink cartridge box, or visit www.lexmark.com/yields. For best results, use only Lexmark ink cartridges. The cartridges can be used for printing documents and photos. When storing new ink cartridges, make sure they are unopened and placed on their flat side. Remove ink cartridges from their packaging only upon installation. Replacing ink cartridges Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out. Removing ink cartridges 1 Turn on your printer. Ordering and replacing supplies 17 If your ink cartridge comes with a twist cap, then remove the cap. 2 Open the printer. V725w INK COM 150, PATIBI 150, 150A LITY CHART 150A , 150X , 150X L, 150X L, 150X LA, 155, LA, 155, 155A 155A , 155X Cyan L, 155X LA xx xx xx xx xx xx xx XX XX MAC : Black 150, 150, 150A 150A , 150X , 150X L, 150X L, 150X LA, 155, LA, 155, 155A 155A www.l exmar XX XX XX XX MT/MN: 4449-70E Mage Yellow nta k.com 2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place. Note: The printhead moves to the cartridge installation position. 3 Press the release tab, and then remove the used ink cartridge or cartridges. Notes: Installing ink cartridges 1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge. • Insert the color cartridges first, and then the black cartridge. • Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air. 3 Close the printer. Ordering and replacing supplies 18 Maintaining ink cartridges In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle every week if it is plugged into an electrical outlet. It will briefly come out of Sleep mode or will temporarily turn on if it is turned off. Aligning the printhead If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead. 1 Load plain paper. 2 From the printer control panel, navigate to: > Setup > >Maintenance > > Align Printer > An alignment page prints. Note: Do not remove the alignment page until printing is finished. If you aligned the cartridges to improve print quality, then print your document again. If print quality has not improved, then clean the printhead nozzles. Cleaning the printhead nozzles If you have not been using the printer for a long period, then you may need to clean the printhead nozzles to improve the quality of your prints. Keep your printer plugged to a properly grounded, working electrical outlet to allow it to perform automatic maintenance cycles. Notes: • Cleaning the printhead nozzles uses ink, so clean them only when necessary. • Deep cleaning uses more ink, so try the Clean Printhead option first to save ink. • If the ink levels are too low, you must replace the ink cartridges before you can clean the printhead nozzles. 1 Load paper. 2 From the printer control panel, navigate to: > Setup > > Maintenance > 3 Press the up or down arrow button to scroll to Clean Printhead or Deep Clean Printhead, and then press A cleaning page prints. . Using the printer software 19 Using the printer software Installing the printer software Note: If you installed the printer software on this computer before but need to reinstall the software, then uninstall the current software first. Minimum system requirements The printer software requires up to 500MB of free disk space. Supported operating systems • • • • • • • • • • • • • • • • • • • • • • • * For Windows users 1 Close all open software programs. 2 Insert the installation software CD. If the installation dialog screen does not appear after a minute, then launch the CD manually: Microsoft Windows 7 (SP1) Microsoft Windows Server 2008 (R2 SP1) a Click , or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD Microsoft Windows Server 2008 (SP1) Microsoft Windows Server 2003 (SP2) drive. Microsoft Windows Vista (SP1) c Press Enter, or click OK. Microsoft Windows XP (SP3) 3 Click Install, and then follow the instructions on the computer screen. Macintosh Intel OS X version 10.7.0 or later Macintosh Intel OS X version 10.6.0 or later For Macintosh users Macintosh Intel OS X version 10.5.0 or later Macintosh Intel OS X version 10.4.4 or later Macintosh PowerPC OS X version 10.5.0 or later Macintosh PowerPC OS X version 10.4.0 or later Ubuntu Linux 11.04, 10.10, 10.04, and 9.04 LTS* Red Hat Enterprise Linux WS 6, WS 5, and WS 4* Red Flag Linux Desktop 6.0* Note: To take advantage of the full features of your printer, select the custom install option, and then select all packages listed. 1 Close all open applications. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop. 3 Double-click the software installer package, and then follow the instructions on the computer screen. SUSE Linux Enterprise Server 11 and 10* SUSE Linux Enterprise Desktop 11 and 10* Linux openSUSE 11.4, 11.3, and 11.2* Linpus Linux Desktop 9.6* Fedora 14* Debian GNU/Linux 6.0 and 5.0* Mint 10 and 9* PCLinux OS 2010* The printer driver for this operating system is available only at http://support.lexmark.com. Using the Internet 1 Go to the Lexmark Web site at http://support.lexmark.com. 2 Navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system 3 Download the driver, and then install the printer software. Using the Windows printer software Software installed during printer installation When you set up the printer using the installation software CD, all the necessary software was installed. You may have chosen to install some additional programs. The following table provides an overview of various software programs and what they can help you do. If you did not install these additional programs during initial installation, then reinsert the installation software CD, run the installation software, and then click Advanced Options > Install Additional Software. Using the printer software 20 Printer software Use the LexmarkTM Printer Home (referred to as Printer Home) To • • • • • • • • • • Use the To Printing Preferences When you click File > Print > Properties with a document open, a Printing Preferences dialog appears. The dialog lets you select options for the print job, such as the following: Launch applications or programs. Scan or e‑mail a photo or document. • • • • • • Edit scanned documents. Scan documents to PDF. Adjust settings for the printer. Order supplies. Maintain ink cartridges. Register the printer. Print two‑sided copies. Select the paper type. Add a watermark. Enhance images. Save settings. Note: Printing Preferences is installed automatically with the printer software. Contact technical support. Access the User's Guide. Select the number of copies to print. Lexmark Phone Book (referred to as Phone Book) Manage your fax contacts. Note: Your printer may not come with some of these programs or some of the functions of these programs, depending on the features of the printer that you purchased. Abbyy Sprint OCR Scan a document and produce text that you can edit with a word‑processing program. Using the Macintosh printer software Lexmark Wireless Setup Utility (referred to as Wireless Setup Utility) • Set up the wireless printer on a wireless network. • Change the wireless settings of the printer. Note: This program is installed automatically with the printer software if the printer has wireless capability. Lexmark Tools for Office (referred to as Tools for Office) Access your favorite settings in Microsoft Office 2007. Printer Setup Utility Configure the fax and e‑mail settings of your printer. Status Messenger Learn more about the printing problems encountered. Status Monitor Center Product Update • Check the supplies status of your printer. • Order supplies online. Receive automatic notifications of updates to your printer software when new updates are available. Launching the Print dialog Use the Print dialog to adjust the print settings and schedule print jobs. With a document or photo open, choose File > Print. Launching an application 1 From the Finder, navigate to: Applications > select your printer folder 2 Double‑click the application that you want to use. Use the Printer Settings To • • • • Customize settings for fax jobs. Create and edit the Contacts list. Configure e‑mail connectivity settings. Configure the language, country, date, and time. Shortcuts Speed up usual tasks with your printer. Wireless Setup Assistant Set up the printer on a wireless network. Uninstaller Remove the printer software from your computer. Note: This application is automatically installed with the printer software if the printer has wireless capability. Using the printer software 21 Notes: • Your printer may not come with these applications, depending on the features of the printer that you purchased or the installation type (standard or custom) chosen when you installed the printer. • To take advantage of the full features of your printer, select the custom install option during installation, and then select all packages listed. Accessing Web links Web links are links to predefined Web pages that are saved in the printer folder. 1 From the Finder, navigate to: Applications > select your printer folder > Web Links 2 Double‑click the Web link that you want to visit. Use To Customer Support Contact customer support. Lexmark Software Updates Download and install the latest printer software. Lexmark Online Visit the Lexmark Web site. Order Supplies Online Order ink or supplies. Printer Registration Register your printer. Visit Lexmark SmartSolutions • Visit the SmartSolutions Web site. • Choose your custom solutions. Note: Your printer may not come with these Web links, depending on the features of the printer that you purchased. Printing Printing Printing a document For Windows users 1 With a document open, click File > Print. 22 3 Navigate to: Layout tab > Print on Both Sides (Duplex) area > Print on both sides • Click Long edge for print jobs with pages that are bound along the long edge of the page. • Click Short edge for print jobs with pages that are bound along the short edge of the page. 4 Click the Paper/Finishing tab, and then select a supported paper type. 5 Click OK to close any printer software dialogs. 6 Click OK or Print. 2 Click Properties, Preferences, Options, or Setup. To return to single-sided printing, repeat steps 1 and 2, and then navigate to: 3 Select the print quality, the number of copies to print, the type of paper to use, and how the pages Layout tab > Print on Both Sides (Duplex) area > Print on one side only should print. 4 Click OK to close any printer software dialogs. 5 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer, paper size, and orientation. For Macintosh users 3 Click OK. 1 With a document open, choose File > Page Setup. 4 From the menu bar, choose File > Print. 2 From the Page Setup dialog, set the printer, paper size, and orientation. 5 From the Printer pop‑up menu, choose your printer. 3 Click OK. 6 From the print options pop‑up menu, choose Quality & Media. 4 From the menu bar, choose File > Print. 7 From the Paper Type pop‑up menu, choose a supported paper type. 5 From the Printer pop‑up menu, choose your printer. 8 From the print options pop‑up menu, choose Layout. 6 From the print options menu, choose the print quality, the number of copies to print, the type of paper 9 From the Two‑Sided pop‑up menu, choose Long‑Edge binding or Short‑Edge binding. • For Long‑Edge binding, pages are bound along the long edge of the page (left edge for portrait, to use, and how the pages should print. 7 Click Print. Printing on both sides of the paper (duplexing) automatically Notes: • The automatic duplex unit supports A4‑ and letter‑size paper. It also supports plain, premium plain, ColorLok certified plain, heavy plain, and letterhead paper types. • Do not remove the page until printing is finished. Warning—Potential Damage: Do not touch the duplex latch or latches while actively printing. For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. top edge for landscape). Portrait Landscape 2 1 2 1 Printing 23 • For Short‑Edge binding, pages are bound along the short edge of the page (top edge for portrait, left edge for landscape). Portrait Landscape When the printer detects the memory device, Storage Device Detected appears on the display. 2 If document files are stored on the memory device, then the printer automatically switches to File Print mode. If document files and image files are stored on the memory device, then press the left or right arrow button to scroll to Documents, and then press . 3 Press the up or down arrow button to scroll to the document, and then press to select the document for printing. 4 From the Print Options menu screen, use the arrow buttons to select your printing options, and then press 10 Click Print. Note: You may select the number of copies, color mode, print quality, paper source, and papersaving options. You can also enhance sharpness, and use separator sheets. Printing photos from a flash drive 1 Load photo paper. 2 Insert a flash drive or digital camera set to mass storage mode. If image files and document files are stored in the memory device, then press the left or right arrow button to select Photos, and then press . Note: Only files with supported file types will be shown. 3 Use the up or down arrow button to select a photo printing option, and then press . • Select and Print allows you to choose a layout, the number of photos per page, paper settings, photo size, photo quality, and to sharpen the quality of graphics. • Print Photos allows you to print all photos, selected photos by photo range, and print photos using predefined photo size templates. 4 To adjust the print settings, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press to make a selection. 5 Press . Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing. Printing documents from a flash drive Make sure the flash drive contains document files that are supported by the printer. For more information, see “Supported file types” on page 14. 1 Insert a flash drive. , if necessary. 5 Press . Canceling print jobs To cancel a print job from the printer control panel, press printer returns to the home screen. , and then press . Printing stops and the To cancel a print job from the computer, do the following: For Windows users 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. The printers folder opens. 4 Right‑click the printer, and then select Open or See what's printing. 5 Cancel the print job: • If you want to cancel a particular print job, then right‑click the document name, and then select Cancel. • If you want to cancel all print jobs in the queue, then click Printer > Cancel All Documents. For Macintosh users 1 Click the printer icon on the Dock. The print queue dialog appears. 2 Choose the job you want to cancel, and then click Delete. Printing Printing from a mobile device What is LexPrint? LexPrint is a free application that lets you print easily from your iPad, iPhone, or iPod touch using any Lexmark printer connected to the same wireless network. It lets you print Web pages, photos from the photo album, or photos you recently captured using the camera of your mobile device, depending on its features. You can also customize print settings from your mobile device. Depending on your Lexmark printer model, you may need to download the LexPrint Listener application from our Web site at www.lexmark.com/lexprint. Supported printers LexPrint enables your mobile device to communicate with Lexmark printers found on the same network. • For select printer models that support Direct Image and Zeroconf or Bonjour, you can print directly from your mobile device to the printer without using LexPrint Listener. To check if your printer model supports these features, visit www.lexmark.com/lexprint. • For other Lexmark printers, your mobile device can send print jobs to your printer as long as the printer software and LexPrint Listener are installed on the computer where the printer is connected. Note: The application referred to as Rendezvous in Mac OS X version 10.2 is now called Bonjour by Apple Inc. 24 Copying 25 2 Load an original document faceup into the ADF or facedown on the scanner glass. Copying ADF 3 From the printer control panel, navigate to: > Copy > Scanner glass > Copies 4 Press the left or right arrow button to select the number of copies. 5 From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press to make a selection. 6 Select the copy mode: • Press to switch to color mode. • Press to switch to black‑and‑white mode. When you select color or black‑only printing, the light that corresponds to your choice comes on. 7 Press . Note: The selected copy settings are reset to the factory default after two minutes of printer inactivity. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making a two‑sided (duplex) copy automatically The automatic duplex unit supports A4‑ and letter‑size paper. If you need to make two‑sided copies using other paper sizes, then see the instructions for making a two‑sided copy manually. Note: You cannot make two‑sided copies on envelopes, card stock, or photo paper. Use the ADF for multiple‑page documents. 1 Load paper. Note: The ADF is available only on select models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass. 2 Load the original document faceup into the ADF or facedown on the scanner glass. 3 From the printer control panel, navigate to: > Copy > Tips for copying • Make sure you load the original document faceup into the ADF or facedown at the placement corner of the scanner glass. • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 1 Load paper. • If you are copying a two-sided document and using the scanner glass, then press the arrow buttons to scroll to 2‑sided to 2‑sided. • If you want to specify the page orientation and layout of the original document and the copy, then image. Making copies 4 Press the left or right arrow button to select a two‑sided copying option: • If you are copying a one‑sided document, then press the arrow buttons to scroll to 1‑sided to 2‑sided. • When using the ADF, adjust the paper guide on the ADF to the width of the original document. • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned • When the document to be copied is in place with the settings you want, press > 2‑Sided Copies press the arrow buttons to scroll to Advanced. Press then press to start copying. every time you make a selection, and until you reach the Copy menu screen. Notes: • For long-edged binding, pages are bound along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation). Copying 26 • For short-edged binding, pages are bound along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation). 5 Press , and then follow the instructions on the display. Canceling copy jobs To cancel a copy job, press , and then press . Scanning stops and the printer returns to the previous menu. Scanning 27 2 From the printer control panel, navigate to: Scanning > Scan > > Computer > USB‑Connected Computer > The USB‑connected computer will receive the scan by default. ADF Scanner glass Note: Make sure the scan software is installed on the destination computer. 3 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want. Set the color, quality, original image size, and other scan options. If necessary, press you make a selection. 4 Press each time . Scanning to a flash drive or memory card Notes: • Some features are available only in select printer models. • Make sure your flash drive or memory card is not write‑protected. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). 1 Load the original document faceup into the ADF or facedown on the scanner glass. 2 From the printer control panel navigate to: > Scan > > Memory Device Use the ADF for multiple‑page documents. 3 Insert the flash drive or memory card, and then press Note: The ADF is available only on select models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass. 4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the Note: The printer reads only one memory device at a time. left or right arrow button to scroll to the setting you want. Set the color, quality, original image size, and other scan options. If necessary, press you make a selection. Tips for scanning • Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size. • When using the ADF, adjust the paper guide on the ADF to the width of the original document. • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image. • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. • When the document to be scanned is in place with the settings you want, press . 5 Press . Follow the instructions on the printer display. Scanning directly to e‑mail using the printer software Make sure you have set up your e‑mail settings before proceeding. For more information, see the section on e‑mailing in the User’s Guide. to start scanning. For Windows users Scanning to a local computer 1 Load the original document faceup into the ADF or facedown on the scanner glass. each time 1 Load an original document faceup into the ADF or facedown on the scanner glass. Scanning 28 Scanning starts and the scan progress dialog appears. 2 Click or Start. 5 Save the document as a PDF. 3 Click All Programs or Programs, and then select the printer program folder from the list. For Macintosh users 4 Navigate to: Printer Home > select your printer > Scan 5 Select Email photo, Email document, or Email PDF. Note: You can select Email document only if an OCR application is stored on your computer. Scanning starts and the scan progress dialog appears. When the scan is finished, a new e‑mail message is created with the scanned document automatically attached. 6 Compose your e‑mail message. Note: If your e-mail program does not open automatically, then you can scan the document to the computer and then send it through e-mail as an attachment. 1 Load an original document faceup into the ADF or facedown on the scanner glass. 2 From the Applications folder in the Finder, launch the application you want to use. Note: Use any application that supports both your printer and an e‑mailing option, such as Image Capture. 3 From the list of devices, select your printer. Note: For information on finding the list of devices, check the documentation that came with the application, or search for Scanning an image in the Search field of the Help menu. 4 Adjust the scan settings as needed. ? Note: Use any application that supports your printer. 3 From the list of devices, select your printer. Note: For information on finding the list of devices, check the documentation that came with the application or search for Scanning an image in the Search field of the Help menu. 4 Adjust the scan settings as needed. 6 Compose your e‑mail message. Scanning to a PDF For Windows users 1 Load an original document faceup into the ADF or facedown on the scanner glass. or Start. 3 Click All Programs or Programs, and then select the printer program folder from the list. 4 Navigate to: Printer Home > select your printer > Scan > PDF ? on the preview dialog for more information. 5 Set the application that supports the PDF format as the scan destination, and then start the scan job. 6 Save the document as a PDF. Canceling scan jobs Do one or more of the following: • From the printer control panel, press , and then press . Scanning stops and the printer returns to the previous menu. • If you are sending the scan job using the printer software, then cancel the scan job from the software dialog. on the preview dialog for more information. 5 Set the e‑mail application as the scan destination, and then start the scan job. 2 Click 2 From the Applications folder in the Finder, launch the application you want to use. If applicable, click For Macintosh users If applicable, click 1 Load an original document faceup into the ADF or facedown on the scanner glass. E-mailing 29 Applications > select your printer folder > Printer Settings > Email E-mailing 2 Follow the instructions on the computer screen, and then click Save Settings. Sending e-mail Canceling an e‑mail Do one or more of the following: Tips for e‑mailing • Make sure to enter your e‑mail account information and set up the SMTP server before sending an e‑mail. • Make sure the printer is connected to an Ethernet or wireless network before sending an e‑mail. If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP server. If the printer cannot connect to the Internet, then contact your system support person. The printer supports only one active network connection (Ethernet or wireless) at a time. • Add contacts to your address book. When sending an e‑mail, you can just select contacts from your address book instead of typing their e‑mail addresses repeatedly. • Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size. • When using the ADF, adjust the paper guide on the ADF to the width of the original document. • To easily retrieve a document after copying or scanning through the ADF, lift the ADF input tray. • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image. • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. • When the document to be e-mailed is in place with the settings you want, press to start scanning. Setting up the e-mail function For Windows users 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 3 Navigate to: Printer Home > select your printer > Settings > Set up the printer to e‑mail The E‑mail Setup Wizard opens. 4 Follow the instructions on the computer screen. For Macintosh users 1 From the Finder, navigate to: • From the printer control panel, press , and then press . • If you are sending the e‑mail using the printer software, then cancel the e-mail from the software dialog. Setting up the printer to fax Setting up the printer to fax CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ‑11) cord provided with this product or a UL Listed 26 AWG or larger replacement when connecting this product to the public switched telephone network. CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm. 30 To connect: Connect the cable from the wall jack to the port of the printer. Tips for this setup: • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off). • If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of rings that you want. Setup 2: Printer is sharing the line with an answering machine Step 1: Connect the printer to the telephone line Connected to the same telephone wall jack Check the scenarios below and follow the setup that is applicable to your telephone service. Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line EXT LINE PHONE LINE EXT LINE To connect: 1 Connect the cable from the wall jack to the 2 Remove the protective plug from the to the port. port of the printer. port of the printer, and then connect the answering machine Setting up the printer to fax 31 Connected to different wall jacks Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service EXT LINE EXT LINE PHONE LINE 02 To connect: Connect the cable from the wall jack to the port of the printer. Tips for this setup: • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On). • Set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call. • If you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. To connect: 1 Connect the cable from the wall jack to the 2 Remove the protective plug from the port of the printer. port of the printer, and then connect the telephone to the port. Tips for this setup: • This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. • If you have only one telephone number on your line, then you need to set the printer to receive faxes manually (Auto Answer Off). Setting up the printer to fax 32 When you answer the telephone and you hear fax tones, press *9* or the manual answer code on the telephone to receive the fax. • You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off the voice mail service when you are expecting a fax. This setting works best if you are using voice mail more often than fax. To install a filter for the printer: 1 Connect the line port of the DSL filter to the wall jack. 2 Connect a telephone cable from the port on the back of the printer to the phone port on the DSL filter. 3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the Scenario 2: Digital Subscriber Line (DSL) DSL filter. 4 To connect a telephone to the printer, remove the protective plug from the and then connect the telephone to the port. Scenario 3: VoIP telephone service EXT LINE A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access. To minimize interference between the two channels and ensure a quality connection, you need to install a DSL filter for the analog devices (fax machine, telephone, answering machine) in your network. Interference causes noise and static on the telephone, failed and poor quality faxes for the printer, and slow Internet connection on your computer. To connect: 1 Connect one end of a telephone cable to the port of the printer. port of the printer Setting up the printer to fax 33 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your VoIP provider if you want to activate the second phone port. 3 Remove the protective plug from the port of the printer, and then connect the telephone to the Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem Follow this setup if you normally connect your telephone to a cable modem. port. Tips for this setup: • To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active. • If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port, and then plug the printer and telephone into the splitter. Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone. To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem. The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider if you want to activate the second phone port. 3 Remove the protective plug from the port of the printer, and then connect the telephone to the port. Tips for this setup: • To make sure that the phone port on the cable modem is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active. Setting up the printer to fax 34 • If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter. Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone. Scenario 5: Country‑ or region‑specific setup Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted by most countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a telephone cable that has an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack. Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the house Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to plug your devices into the cable modem. Your cable telephone service comes from the wall jacks. The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ‑11 connectors. If you have a different type of connector in your country or region, then you may need to use an RJ‑11 adapter. To connect: 1 Connect the cable from the wall jack to the 2 Remove the protective plug from the port. port of the printer. port of the printer, and then connect the telephone to the Setting up the printer to fax 35 Connecting the printer to a non‑RJ‑11 wall jack Notes: • Do not remove the wrap plug from the port of the printer. • The printer may not come with an RJ-11 adapter in your country or region. If the additional device (telephone or answering machine) has an RJ-11 connector, then you can remove the wrap plug and connect the device to the port of the printer. EXT LINE EXT LINE Connecting the printer in countries or regions that use serial connection To connect: 1 Connect one end of a telephone cable to the In some countries or regions, you need to plug all devices into the wall jack. You cannot plug a telephone port of the printer. or answering machine into the port of the printer. This is called serial connection. 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. 3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ 11 connector, then connect it directly to the wall jack. Austria Germany Portugal Belgium Ireland Spain Denmark Italy Sweden Setting up the printer to fax 36 France Netherlands Switzerland Connecting the printer to a wall jack in Germany Finland Norway United Kingdom The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. Warning—Potential Damage: If your country or region is on the list, then do not remove the wrap plug port of the printer. It is necessary for the proper functioning of the devices on the from the telephone line. EXT LINE To connect: Connect the cable from the wall jack to the port of the printer. N F N Setting up the printer to fax 37 Connect the printer to any of the N ports. If you hear a dial tone, then the telephone line and the wall jack are working. Make sure the printer is properly connected to the telephone line 1 While the printer is connected to a telephone line through the an analog telephone into the port on the back of the printer, plug port of the printer. 2 Listen for a dial tone. If you hear a dial tone, then the printer is properly connected to the telephone line. EXT LINE If you do not hear a dial tone, then review Step 1 or see the “Fax troubleshooting checklist” on page 46. Step 3: Set your fax name and fax number Your user information includes your name or your company name, your fax number (your fax number is your telephone number, unless you have a dedicated fax telephone line), and the time and date on your fax machine when a transmission is made. This information appears in the header and footer of the faxes that you send. In some countries, you cannot send a fax without this information. Some fax machines also block faxes without sender information, so make sure that you enter this information in your printer. N F N PHONE LINE 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Dialing and Sending > 2 Enter your name or your company name, and then press • To change a character, press the left arrow button. • To add a space, press the number 0. To connect: 1 Connect one end of a telephone cable to the > Fax Name > . 3 Press the arrow buttons to scroll to Fax Number, and then press port of the printer. 4 Enter your fax number or your telephone number, and then press . . 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to an N port. 3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown. Step 2: Check the dial tone A dial tone lets you know if the telephone line is working or if the printer is properly connected to the telephone line. Make sure the telephone line and the wall jack are working 1 Plug an analog telephone into the wall jack. 2 Listen for a dial tone through the telephone handset. Step 4: Set the printer to receive faxes automatically or manually If the printer is connected to a dedicated fax line or sharing the line with an answering machine, then you can set the printer to receive faxes automatically. If the printer is sharing the line with a telephone subscribed to voice mail service, then set the printer to receive faxes manually. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Auto Answer > 2 Press the arrow buttons to scroll to the setting you want, and then press . Setting up the printer to fax 38 Step 5: Set the number of rings Note: In some models, entries 1–89 are for individual contacts and entries 90–99 are for fax groups. Enter the entry number before entering the contact name and fax number of the contact. If you set Auto Answer to On in Step 4, then do the following. If you set Auto Answer to Off, then proceed to Step 6. Using the fax software If you are connecting the printer to a computer, then you can also create a contact list using the fax software. If you subscribe to Distinctive Ring Setting the correct ring is important if you subscribe to the Distinctive Ring Pattern Detection (DPRD) feature offered by telephone companies. This feature allows you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern (All Rings, Single Ring Only, Double Ring Only, Triple Ring Only, Single or Double Rings Only, Single or Triple Rings Only, Double or Triple Rings Only). The different ring patterns let you know which telephone number was dialed and which device you should use to answer the call. Assign one of your telephone numbers to the printer as the fax number, and then set the printer to answer the ring pattern of that number. If the pattern is set incorrectly, then the printer rings, but it never receives the fax. > Fax Setup > 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 3 Navigate to: Printer Home > select your printer > Fax > Edit contact list The Contacts tab of the Printer Setup Utility opens. 1 From the printer control panel, navigate to: > Setup > For Windows users > Ringing and Answering > > Ring Pattern > 2 Press the arrow buttons to scroll to the ring pattern you want, and then press . For Macintosh users 1 From the Finder, navigate to: Applications > select your printer folder If you do not subscribe to Distinctive Ring 2 Double‑click Printer Settings. If the printer is sharing the line with other devices, then set the printer to pick up on the greater number of rings. If the printer is connected to a dedicated fax line, then you can choose any number of rings that you want. 3 Click the Contacts tab. • To add contacts, click the Individuals tab. • To add fax groups, click the Groups tab. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Pick Up On > 2 Select the number of rings that you want, and then save the setting. Step 6: Create a contact list Using the printer control panel 1 From the printer control panel, navigate to: Touch‑screen models Arrow‑button models > Address Book > Setup > > Fax Setup > > Address Book > 2 Use the menus to add a contact or a fax group. You can add up to 89 contacts and 10 fax groups. • To change a character, press the left arrow button. • To add a space, press the number 0. For more information on the fax software, click Help or ? . Faxing 39 Sending faxes using the computer Faxing For Windows users CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. 1 With a document open, click File > Print. 2 Make sure the appropriate printer is selected, and then click Properties, Preferences, Options, or Setup. 3 Click the Fax tab, and then make sure Enable Fax is selected. Sending faxes 4 Enter the recipient fax number or numbers in the “Fax number(s)” field. You can enter fax numbers manually or by using the Phone Book feature. Tips for sending faxes • Make sure the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working • • • • • 5 If necessary, enter a prefix in the Dialing Prefix dialog. if you hear a dial tone. 6 Select the appropriate paper size and page orientation. Make sure the paper exit tray is fully extended and the tray extension is flipped out. 7 Select Include Cover Page with Fax, and enter the appropriate information if you want to include a Depending on your printer model, use the ADF when scanning two‑sided (duplex) pages. To easily retrieve a document after copying or scanning, lift the ADF input tray. 8 Click OK. When using the ADF, adjust the paper guide on the ADF to the width of the original document. When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image. • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. • When the document to be faxed is in place with the settings you want, press cover page with the fax. to send the fax. Sending faxes using the printer control panel For Macintosh users 1 With a document open, choose File > Print. 2 From the Printer pop‑up menu, select the fax version of your printer. Note: In order to see the fax options on the Print dialog, you must use the fax driver for your printer. If the fax version of the printer is not on the list, then choose Add a printer, and then choose the fax version of the printer. 3 Enter the name and number of the recipient. 4 Click Fax. 1 From the printer control panel, navigate to: > Fax 2 Enter a fax number, or press Address Book to select a number from the Speed Dial or Group Dial list. 3 If you want to send a fax to a single recipient, then press . If you want to send a fax to a group of numbers (broadcast fax), then press the left or right arrow button to enter another number, and then press Receiving faxes . Repeat this step to add more numbers. Tips for receiving faxes When receiving faxes: • Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is 4 Press the Color/Black button to select a color or black‑and‑white fax. working if you hear a dial tone. 5 Press to start the fax job. Warning—Potential Damage: Do not touch the cables or the fax. Tip: • You can send a broadcast fax to up to 30 recipients. • If you set the printer to receive faxes manually (Auto Answer Off), then make sure that the ringer and ports while actively sending a volume is not set to Off. • If you have set the printer to receive faxes automatically (Auto Answer On), then load paper in the printer. Faxing 40 Receiving faxes automatically • Make sure that the telephone is plugged into the printer is connected to the wall jack through the 1 Make sure that Auto Answer is on: From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Auto Answer > > On > 2 Set the number of rings before the printer picks up incoming faxes: a Press the arrow buttons to scroll to Pick Up On, and then press . b Press the arrow buttons to scroll to the number of rings that you want, and then press to save the setting. When the number of rings you set is detected, the printer automatically receives the incoming fax. Warning—Potential Damage: Do not touch the cables or the a fax. and ports while actively receiving Tips: • If the printer is sharing the line with other analog devices (telephone, answering machine), then set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call. If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings. • If you have multiple numbers on a single line, or if you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. Receiving faxes manually 1 Turn off Auto Answer: From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Auto Answer > > Off > 2 When the telephone rings and you hear fax tones when you pick up the handset, press on the printer or *9* on the telephone attached to the printer. Warning—Potential Damage: Do not touch the cables or the a fax. and ports while actively receiving Tips: • The default code for answering faxes manually is *9*, but for increased security, you can change it to a number that only you know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and the characters # and *. port on the back of the printer and that the port. Wireless networking Wireless networking 41 For Windows users 1 Close all open software programs. 2 Insert the installation software CD. Information you will need to set up the printer on a wireless network To set up the printer for wireless printing, you need to know: • The name of your wireless network, which is also known as the SSID (Service Set Identifier) • If encryption was used to secure your network • The security key (either a WEP key or WPA/WPA2 passphrase) To find the WPA/WPA2 passphrase for the wireless network, see the documentation that came with the access point, see the Web page associated with the access point, or consult your system support person. If your access point is using WEP security, then the WEP key should be: • Exactly 10 or 26 hexadecimal characters or • Exactly 5 or 13 ASCII characters If your access point is using WPA or WPA2 security, then the WPA/WPA2 passphrase should be: • Exactly 64 hexadecimal characters If the installation dialog does not appear after a minute, then launch the CD manually: a Click , or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive. c Press Enter, or click OK. 3 Follow the instructions on the computer screen. Note: Select Wireless connection when prompted to select a connection type. For Macintosh users 1 Close all open applications. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop. 3 Double-click the software installer package, and then follow the instructions on the computer screen. Note: Select Wireless connection when prompted to select a connection type. or • From 8 to 63 ASCII characters Notes: • Hexadecimal characters are A–F, a–f, and 0–9. • ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA/WPA2 passphrase are case‑sensitive. If your wireless network is not using security, then you will not have a security key. Note: If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter and look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person. What is Wi‑Fi Protected Setup? Wi‑Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless home network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices. Note: WPS supports only networks that communicate through access points (wireless routers). The printer supports the following methods in connecting to a wireless network: • Personal Identification Number (PIN)—A PIN on the printer is entered into the wireless settings of the access point. • Push Button Configuration (PBC)—Buttons on both the printer and the access point are pushed within a given period of time. Installing the printer on a wireless network Before you install the printer on a wireless network, make sure that: • Your wireless network is set up and working properly. • The computer you are using is connected to the same wireless network where you want to set up the printer. Look for any of these identifier marks to check if your access point is WPS certified: Wireless networking 42 You can find these WPS logos on the side, back, or top of your access point. For more information on accessing the wireless settings and determining the WPS capability of your access point, see the documentation that came with the access point or contact your system support person. Configuring Wi‑Fi Protected Setup manually Note: Make sure your access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified. For more information, see the User’s Guide. If your printer or device has not yet been configured for wireless connection and you want to configure it using WPS, then push the WPS button on the wireless router. Wait for the printer control panel to display a message to begin WPS configuration. There might be a short delay before the message appears. If nothing happens after 30 seconds, then do one of the following: USE THE PUSH BUTTON CONFIGURATION (PBC) METHOD 1 From the printer control panel, navigate to: > Setup > Setup > > Network Setup > > Wireless > > Wireless 802.11b/g/n > > Wi‑Fi Protected Setup > > Network Connection > WPS PBC Mode > 2 Follow the instructions on the printer display. USE THE PERSONAL IDENTIFICATION NUMBER (PIN) METHOD 1 From the printer control panel, navigate to: > Setup > Setup > > Network Setup > > Wireless > > Wireless 802.11b/g/n > > Wi‑Fi Protected Setup > 2 Follow the instructions on the printer display. > Network Connection > WPS PIN Mode > Troubleshooting 43 Incorrect language appears on the display Troubleshooting If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: Before you troubleshoot CHANGE THE LANGUAGE USING THE PRINTER MENUS Use this checklist to solve most printer problems: • Make sure the power cord is plugged into the printer and into a properly grounded, working electrical 1 From the printer control panel, navigate to: > Setup > outlet. • • • • • • Make sure the printer is turned on. > Device Setup > > Language > 2 Press the up or down arrow button to scroll to the language you want, and then press . Make sure the printer is securely connected to the computer, print server, or network access point. 3 To confirm the setting, press the left or right arrow button to scroll to Yes, and then press Check the printer for error messages, and resolve any errors. . Check for paper jam messages, and clear any jams. Check the ink cartridges, and install new cartridges if necessary. Installation screen did not appear during installation Turn the printer off, wait about 10 seconds, and then turn the printer back on. If the "Before you troubleshoot" checklist does not solve the problem, then try the following: Note: Make sure the printer is not in Sleep mode. Press and hold the printer. for three seconds to turn off LAUNCH THE PRINTER CD MANUALLY For Windows users If Troubleshooting does not solve your problem Visit our Web site at http://support.lexmark.com to find the following: • Knowledgebase articles with the latest information and troubleshooting for your printer • Live online technical support • Contact numbers for telephone technical support 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive. 3 Press Enter, or click OK. 4 Click Install, and then follow the instructions on the computer screen. Setup troubleshooting • • • • • • • For Macintosh users “Incorrect language appears on the display” on page 43 1 From the Finder desktop, click the CD icon. “Software did not install” on page 43 2 Double-click the software installer package, and then follow the instructions on the computer “Print job does not print or is missing pages” on page 44 screen. “Printer is printing blank pages” on page 44 “Printer is busy or does not respond” on page 45 Software did not install “Cannot delete documents from the print queue” on page 45 If you encountered problems while installing, or if your printer does not appear in the list in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software. “Cannot print through USB” on page 45 Before you reinstall the software, do the following: MAKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE Troubleshooting 44 If your printer does not appear in the list, then try either of the following: CHECK THE USB CONNECTION 1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. 2 Firmly plug the square end of the USB cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with . Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port. RECONNECT THE PRINTER POWER SUPPLY MAKE SURE THE PRINT JOB IS NOT PAUSED MAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER RECONNECT THE PRINTER POWER SUPPLY 1 Turn off the printer. 1 Turn off the printer. Note: Make sure the printer is not in Sleep mode. Press and hold the printer. • For a USB-connected printer, remove and then reconnect the USB cable. • For a printer that is wirelessly connected, see the Wireless troubleshooting section. for three seconds to turn off 2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply. 3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet. 4 Turn on the printer. Print job does not print or is missing pages If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: Note: Make sure the printer is not in Sleep mode. Press and hold the printer. for three seconds to turn off 2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply. 3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet. 4 Turn on the printer. REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER CHECK THE USB CONNECTION 1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. 2 Firmly plug the square end of the USB cable into the back of the printer. MAKE SURE THE INK CARTRIDGES ARE INSERTED CORRECTLY 1 Turn the printer on, and then open the printer. 2 Make sure the cartridges are inserted correctly. The cartridges should click firmly into the matching color slot of the printhead. 3 Close the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with . Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port. REMOVE AND REINSTALL THE PRINTER SOFTWARE SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOB Note: This solution applies to Macintosh users only. Printer is printing blank pages 1 With a document open, choose File > Print. Blank pages may be caused by improperly installed ink cartridges. 2 From the printer pop-up menu, choose your printer, and then click Print. REINSTALL THE INK CARTRIDGES AND DEEP CLEAN AND ALIGN THE PRINTHEAD If your printer does not appear in the Printer list, then choose Add Printer. From the list of printers in the Default tab, select your printer, and then click Add. 1 Reinstall the ink cartridges, see “Replacing ink cartridges” on page 16 for more information. Troubleshooting 45 If the cartridges do not seem to fit, then make sure the printhead is properly seated, and then try installing the cartridges again. Cannot delete documents from the print queue If you have jobs stuck in the print queue and cannot delete them to get other jobs to print, then the computer and printer may not be communicating. 2 Load plain, unmarked paper. 3 From the printer control panel, navigate to: > Setup > RESTART THE COMPUTER AND TRY AGAIN > Maintenance > 4 Press the up or down arrow button to scroll to Deep Clean Printhead, and then press . REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER A cleaning page prints. 5 Load plain, unmarked paper. Cannot print through USB 6 From the Maintenance menu screen, press the up or down arrow button to scroll to Align Printer, and then press . If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: An alignment page prints. CHECK THE USB CONNECTION Note: Do not remove the alignment page until printing is finished. 1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. Printer is busy or does not respond 2 Firmly plug the square end of the USB cable into the back of the printer. If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with . Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port. MAKE SURE THE PRINTER IS NOT IN SLEEP MODE If the power light is blinking on and off slowly, then the printer is in Sleep mode. Press the printer. to wake up MAKE SURE THE USB PORT IS ENABLED IN WINDOWS If the printer will not come out of Sleep mode, then reset the power: 1 Unplug the power cord from the wall outlet, and then wait 10 seconds. 1 Click 2 Insert the power cord into the wall outlet, and then turn on the printer. 2 In the Start Search or Run box, type devmgmt.msc. If this problem persists, then check our Web site for updates for your printer software or firmware. , or click Start and then click Run. 3 Press Enter, or click OK. The Device Manager opens. RECONNECT THE PRINTER POWER SUPPLY 4 Click the plus sign (+) beside Universal Serial Bus controllers. If USB Host Controller and USB Root Hub are listed, then the USB port is enabled. 1 Turn off the printer. Note: Make sure the printer is not in Sleep mode. Press and hold the printer. for three seconds to turn off 2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power For more information, see the computer documentation. REMOVE AND REINSTALL THE PRINTER SOFTWARE supply. 3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet. 4 Turn on the printer. Fax troubleshooting • “Fax troubleshooting checklist” on page 46 • “Cannot send faxes” on page 46 Troubleshooting 46 DECREASE THE TRANSMISSION SPEED OF THE FAX MODEM • “Cannot receive faxes” on page 47 • “Cannot run the fax software” on page 47 The modem of the printer can transmit data at 33,600 bps. This is the maximum speed at which the printer can send and receive faxes. It is not necessary, however, to set the modem to its fastest transmission capability. The speed of the modem of the receiving fax machine must match or be greater than the speed at which you are sending your fax. Otherwise, your fax will not be received. Fax troubleshooting checklist If you encounter problems sending and receiving faxes, then check the connection first: 1 Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device, or cable modem where you connected the printer. Make sure you plug the telephone into the same port. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Dialing and Sending > 2 Select a sending speed, and then press > Max Send Speed > . If you do not hear a dial tone, then contact your line provider. 2 While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the port of the printer. If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item. If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section. ENABLE ERROR CORRECTION Errors and blurs may appear in the faxed document if there is too much noise on the line. This option enables the printer to transmit the bad blocks of data again and correct the errors. When a fax has too many errors, the fax may be rejected by the receiving fax machine. 1 From the printer control panel, navigate to: > Setup > Connection checklist • Make sure that the printer and other devices on the line (if applicable) are set up and configured correctly according to your setup scenario. • Make sure that the cables are connected to the correct ports. • Make sure that the cables are securely plugged in. Check the cable connections for the following hardware, if applicable: Power supply Answering machine Cable modem Splitter Telephone VoIP adapter DSL filter RJ‑11 adapter • If the printer is connected to a Digital Subscriber Line, then make sure you are using a DSL filter for the printer. • If the printer is connected to a VoIP adapter or cable modem, then make sure that the printer is plugged into the first phone port. • If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter. Cannot send faxes If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following: > Fax Setup > > Dialing and Sending > > Error Correction > 2 Check to see if error correction is set to On. If it is not set to On, then press the arrow buttons to select On, and then press ENABLE AUTOMATIC FAX CONVERSION If the receiving fax machine does not support color fax, then this option automatically converts the outgoing color fax to black and white. It also automatically reduces the resolution of the fax to a resolution that the receiving machine can support. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Dialing and Sending > > Auto Fax Convert > 2 Check to see if automatic fax conversion is set to On. If it is not set to On, then press the arrow buttons to select On, and then press If you did not enter your user information during initial setup, then enter your fax name and fax number. In some countries, you cannot send a fax without entering your fax name or company name. Some fax machines also block unknown faxes or faxes without sender information. . MAKE SURE THAT THE DIAL PREFIX SETTING IS CORRECT The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or telephone number. If the printer is in an office setting or in a private branch exchange, this can be a specific number that you need to press so you can make a call outside the office. Make sure that the dial prefix entered in the printer is correct for your network. MAKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTER . 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Dialing and Sending > 2 Press the arrow buttons to create or modify the prefix. > Dial Prefix > Troubleshooting 47 3 If the prefix is not correct, enter the correct prefix, and then press . MAKE SURE THAT YOU HAVE THE CORRECT MANUAL ANSWER CODE If you set the printer to receive faxes manually (Auto Answer Off), then you need to press the correct code when a fax comes in so that the printer can receive it. Cannot receive faxes If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following: 1 From the printer control panel, navigate to: > Setup > MAKE SURE THAT YOU HAVE CONFIGURED THE CORRECT SETTINGS FOR YOUR SETUP The fax settings depend on whether the printer is connected to its own fax line or shares the line with other devices. If the printer is sharing the telephone line with an answering machine, then make sure that the following are set: • Auto Answer is On. • The printer picks up on a greater number of rings than the answering machine. • The printer picks up on the correct distinctive ring (if you subscribe to a distinctive ring service). If the printer is sharing the telephone line with a telephone subscribed to voice mail, then make sure that the following are set: • Auto Answer is Off (if you have only one number on the telephone line). • The printer picks up on the correct distinctive ring (if you subscribe to a distinctive ring service). MAKE SURE THAT THE PRINTER IS CONNECTED TO AN ANALOG PORT > Fax Setup > > Ringing and Answering > > Manual Pickup Code > 2 Copy the manual answer code that appears on the display. Note: To increase the security, you can change your manual pickup code to a number that only you know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and the characters # and *. Cannot run the fax software The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings in the fax software. MAKE SURE A FAX DRIVER IS INSTALLED The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD. MAKE SURE THE PRINTER IS CONNECTED TO A TELEPHONE LINE The printer is an analog device. If you are using a PBX system, then make sure that the printer is connected to an analog port on the PBX. You may need a digital line converter that converts digital signals into analog signals. MAKE SURE THAT THE PRINTER MEMORY IS NOT FULL You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a VoIP adapter, or a cable modem) before you can open the fax software and configure the fax settings. Wireless network troubleshooting The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper while receiving the fax, then the printer saves the fax so you can print it later. However, if the printer memory is full, then the printer may not be able to receive more incoming faxes. An error message appears on the display when the printer memory is full. Resolve the error to free up space in the printer memory. If you are having trouble setting up your printer on a network, print a network setup page, and then see the User's Guide available on the installation software CD. Also, make sure to check the network indicator lights to verify the connection status of the printer. For more information on the location of the network indicator lights, see“Using the printer control panel” on page 13. MAKE SURE THAT FAX FORWARDING IS DISABLED Wireless troubleshooting checklist 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > 2 Press the arrow buttons to scroll to Off, and then press > Fax Forward > . INCREASE THE RINGER VOLUME If you set the printer to receive faxes manually (Auto Answer Off), then increase the ringer volume. Before beginning to troubleshoot the wireless printer, verify the following: • The printer, the computer, and the access point (wireless router) are all plugged in and turned on. • The wireless network is working properly. Try accessing other computers on your wireless network. If your network has Internet access, then try connecting to the Internet over a wireless connection. • Your SSID is correct. Troubleshooting 48 Print a network setup page to verify the SSID the printer is using. If you are not sure if your SSID is correct, then run the wireless setup again. • Your WEP key or WPA passphrase is correct (if your network is secure). Log on to the access point and check the security settings. A security key is like a password. All devices on the same wireless network using WEP, WPA, or WPA2 share the same security key. If you are not sure if your security information is correct, then run the wireless setup again. • The printer and the computer are within the range of the wireless network. For most networks, the printer and the computer should be within 100 feet (30 meters) of the access point (wireless router). • • • • • The Wi‑Fi indicator is green and successfully connected. The printer driver is installed on the computer from which you are performing a task. The correct printer port is selected. The computer and printer are both connected to the same wireless network. For Macintosh users 1 From the Apple menu, choose About This Mac. 2 Click More Info. 3 From the Contents pane, choose Network. 4 If you are connected over a wireless network, choose AirPort from the Active Services list. Locating the printer IP address • You can locate the printer IP address by viewing the printer network setup page. See the User's Guide on the software installation CD for more information on printing a network setup page. Cannot print over wireless network If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software. The printer is located away from obstacles or electronic devices that could interfere with the wireless signal. Before you reinstall the software, check the troubleshooting checklist, and then do the following: Make sure the printer and access point are not separated by poles, walls, or support columns containing metal or concrete. TURN THE ACCESS POINT (WIRELESS ROUTER) OFF AND THEN BACK ON Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices. DISCONNECT FROM VPN SESSION Printing a network setup page A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the printer. When you are connected to another network through a VPN connection, you will not be able to access the printer over your wireless network. End your VPN session, and then try printing again. MAKE SURE DEMO MODE IS TURNED OFF 1 Load plain paper. 2 From the printer control panel, navigate to: > Setup > Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network connections and resolve connectivity issues. > Network Setup > > Print Network Setup Page > Select printer features are not available when Demo Mode is turned on. From the printer control panel, navigate to: > Setup > Locating IP addresses For Windows users 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type cmd. 3 Press Enter, or click OK. The Command Prompt window opens. 4 Type ipconfig, and then press Enter. The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100. > Demo Mode > > Off > CHECK YOUR WEP KEY OR WPA PASSPHRASE If your access point is using WEP security, then the WEP key should be: • Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9. or • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WEP key are case‑sensitive. If your access point is using WPA or WPA2 security, then the WPA passphrase should be: • Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9. or Troubleshooting • From 8 to 63 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA passphrase are case‑sensitive. Note: If you do not know this information, then see the documentation that came with the access point, or contact your system support person. CHECK IF YOUR ACCESS POINT HAS AN ASSOCIATION/REGISTRATION BUTTON Wireless broadband boxes in Europe, the Middle East, and Africa such as LiveBox, AliceBox, N9UF Box, FreeBox, or Club Internet may require you to press an association/registration button when adding the printer to your wireless network. 49 MAKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS NETWORK If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly. The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network. For Windows users 1 Obtain the SSID of the network that the computer is connected to. a Type the IP address of your access point into the address field of your Web browser. If you are using one of these boxes and need more information, then see the documentation that came with your box, or contact your Internet Service Provider (ISP). If you do not know the IP address of the access point: 1 2 3 4 MOVE YOUR ACCESS POINT AWAY FROM OTHER ELECTRONIC DEVICES There may be temporary interference from electronic devices such as microwave ovens or other appliances, cordless phones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely to these devices. • The “Default Gateway” entry is typically the access point . • The IP address appears as four sets of numbers separated by periods, such as MOVE THE COMPUTER AND/OR PRINTER CLOSER TO THE ACCESS POINT The range of your wireless network depends on many factors, including the abilities of your access point and network adapters. If you are having trouble printing, then try placing the computer and printer no more than 100 feet apart. CHECK THE WIRELESS SIGNAL QUALITY Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent, then another factor is causing the problem. CHECK YOUR ADVANCED SECURITY SETTINGS • If you are using MAC (Media Access Control) address filtering to limit access to your wireless network, then you must add the printer MAC address to the list of addresses allowed to connect to the access point. • If you set the access point to issue a limited number of IP addresses, then you must change this so that the printer can be added. Note: If you do not know how to make these changes, then see the documentation that came with the access point, or contact the person who set up your wireless network. MAKE SURE YOUR COMPUTER IS CONNECTED TO YOUR ACCESS POINT • See if you have access to the Internet by opening your Web browser and accessing any site. • If there are other computers or resources on your wireless network, then check to see if you can access them from your computer. Click , or click Start and then click Run. In the Start Search or Run box, type cmd. Press Enter or click OK. Type ipconfig, and then press Enter. Check the Wireless Network Connection section: 192.168.2.134. b c d e Type the user name and password of the access point when prompted. Click OK. In the Wireless settings section, look for the SSID. Write down the SSID. Note: Make sure you copy it exactly, including any capital letters. 2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID. 3 Compare the SSID of the computer and SSID of the printer. If the SSIDs are the same, then the computer and the printer are connected to the same wireless network. If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer. For Macintosh users with an AirPort base station In Mac OS X version 10.5 or later 1 From the Apple menu, navigate to: System Preferences > Network > AirPort The SSID of the network that the computer is connected to is displayed in the Network Name menu. 2 Write down the SSID. Troubleshooting In Mac OS X version 10.4 or earlier 1 From the Finder, navigate to: 50 If you see this message again after you have waited long enough for the printer and the laptop to attach to the network, then there may be a problem with your wireless network. Applications > Internet Connect > AirPort Make sure that the laptop and printer have both received IP addresses: The SSID of the network that the computer is connected to is displayed in the Network menu. For Windows users 2 Write down the SSID. 1 Click For Macintosh users with an access point 1 Type the IP address of the access point in the address field of your Web browser, and then continue , or click Start and then click Run. 2 In the Start Search or Run box, type cmd. to step 2. 3 Press Enter, or click OK. If you do not know the IP address of the access point, then do the following: 4 Type ipconfig, and then press Enter. a From the Apple menu, navigate to: System Preferences > Network > AirPort b Click Advanced or Configure. c Click TCP/IP. The Router entry is typically the access point. 2 Type your user name and password when prompted, and then click OK. 3 In the Wireless settings section, look for the SSID. 4 Write down the SSID, security type, and the WEP key/WPA passphrase (if shown). Notes: • Make sure you copy the network information down exactly, including any capital letters. • Store the SSID and the WEP key or WPA passphrase in a safe place for future reference. MAKE SURE YOUR OS IS COMPATIBLE WITH WIRELESS PRINTING THROUGH AIRPORT The printer supports wireless printing only through AirPort base stations for Mac OS X version 10.5 or later. “Communication not available” message appears when printing wirelessly Try one or more of the following: MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORK If you are using a laptop and have power saving settings enabled, then you may see the ”Communication not available” message on your computer screen when you attempt to print wirelessly. This can occur if the laptop hard drive has powered down. If you see this message, then wait a few seconds and then try to print again. The laptop and printer require a few seconds to power up again and reattach to the wireless network. The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100. For Macintosh users 1 From the Apple menu, navigate to: About This Mac > More Info 2 From the Contents pane, choose Network. 3 If you are connected over a wireless network, then choose AirPort from the Active Services list. The Router entry is typically the access point. Locating the printer IP address • From the printer, print a network setup page. In the TCP/IP section, look for Address. • View the printer settings. From the printer control panel, navigate to: > Setup > Setup > > Network Setup > > TCP/IP > > Wireless 802.11 b/g/n > > Network Connection > IP Address > If the printer or the laptop does not have an IP address, or if either has an address of 169.254.x.y (where x and y are any two numbers between 0 and 255), then do the following: 1 Turn off the device that does not have a valid IP address (the laptop, the printer, or both). 2 Turn on the device, and then check the IP addresses again. If the printer or the laptop still does not receive a valid IP address, then there is a problem with your wireless network. Try the following: • Make sure your access point (wireless router) is turned on and is working. • Remove any objects that could be blocking the signal. • Temporarily turn off any unnecessary wireless devices on your network and pause any network‑intensive activities, like large file transfers or network games. If the network is too busy, then it is possible that the printer is not receiving the IP address within the allowed time. Troubleshooting 51 • Make sure your DHCP server, which may also be your wireless router, is working and is configured to assign IP addresses. If you are not sure how to do this, then refer to the manual that came with your wireless router. If the printer and computer have valid IP addresses and the network is operating correctly, then continue troubleshooting. MAKE SURE THE WIRELESS PORT IS SELECTED Note: This solution applies to Windows users only. 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. 4 Right‑click the printer, and then select Properties or Printer properties from the menu. 5 Click the Ports tab, and then locate the selected port. The selected port has a check mark beside it in the Port column. 6 If the Description column of the selected port indicates that it is a USB port, then scroll through the list and select the port with Printer Port in the Description column. Check the printer model in the Printer column to make sure you select the right printer port. 7 Click OK, and then try to print again. MAKE SURE BIDIRECTIONAL COMMUNICATION IS ENABLED Note: This solution applies to Windows users only. 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. 4 Right‑click the printer, and then select Properties or Printer properties from the menu. 5 Click the Ports tab. 6 Click the box next to Enable bidirectional support if it is not already checked. 7 Click Apply > OK, and then try to print again. Notices Notices 52 All other trademarks are the property of their respective owners. Federal Communications Commission (FCC) compliance information Edition notice statement December 2011 This product complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 this device may not cause harmful interference, and The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility. 2 this device must accept any interference received, including interference that may cause undesired operation. Any questions on this statement should be directed to: Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 For additional compliance information, see the online documentation. Federal Communications Commission (FCC) compliance information For Lexmark technical support, visit support.lexmark.com. statement For information on supplies and downloads, visit www.lexmark.com. This product complies with Part 68 of the FCC Rules. See the product online documentation for additional compliance information. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA © 2011 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense. Trademarks Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Index Index A Address Book 38 ADF output tray location 12 ADF paper guide location 12 ADF tray location 12 aligning the printhead 18 answering machine setting up 30 Automatic Document Feeder (ADF) location 12 B bidirectional communication enabling 50 broadcast fax, sending immediately 39 buttons printer control panel 13 C Caller ID setting 37 canceling copy job 26 e‑mail 29 print job 23 scan job 28 cannot delete documents from print queue 45 cannot print over wireless network 48 cannot print through USB 45 cannot receive faxes 47 cannot run fax software 47 cannot send faxes 46 cartridges, ink ordering 16 checking an unresponsive printer 43 checking the dial tone 37 checklist before you troubleshoot 43 fax troubleshooting 46 cleaning printhead nozzles 18 53 Communication not available message 50 configuring Wi‑Fi Protected Setup PBC, Push Button Configuration method 42 PIN, Personal Identification Number method 42 conserving energy, ink, and paper 5 contact list creating 38 copies making 25 copy job canceling 26 copying 25 on both sides of the paper 25 tips 25 D dial tone checking 37 Digital Subscriber Line (DSL) fax setup 32 digital telephone service fax setup 33 distinctive ring setting 38 documents faxing using the computer 39 faxing using the control panel 39 printing 22 scanning using the touch screen 27 DSL filter 32 duplex copying, automatic 25 printing, automatic 22 duplex unit location 13 E emission notices 52 energy conserving 5 Ethernet port location 13 EXT port location 13 e‑mail canceling 29 e‑mail function setting up 29 e‑mailing scanned documents 27 setting up e‑mail function 29 tips 29 F fax setup country‑ or region‑specific 34 digital telephone service 33 DSL connection 32 standard telephone line connection 30 VoIP 32 fax troubleshooting cannot receive faxes 47 cannot run fax software 47 cannot send faxes 46 fax troubleshooting checklist 46 faxing Auto Answer setting 37 receiving automatically 40 receiving manually 40 sending a broadcast fax immediately 39 sending using the control panel 39 setting sender information 37 tips, receiving 39 tips, sending 39 using the computer 39 using the control panel 39 faxing tips receiving faxes automatically 40 FCC notices 52 features, printer 6 file types supported 14 finding information 5 publications 5 Web site 5 finding IP address of computer (Mac) 48 flash drive inserting 15 printing documents from 23 scanning to 27 G Group List 38 I incorrect language appears on display 43 information finding 5 information needed for setting up printer on wireless network 41 ink conserving 5 ink cartridge access area location 13 ink cartridges installing 16 ordering 16 removing 16 replacing 16 inserting a flash drive 15 installation screen did not appear automatically 43 installing printer on wireless network (Macintosh) 41 on wireless network (Windows) 41 installing printer software 19 J jam clearance cover location 12 L language changing 43 LexPrint 24 line filter 32 LINE port location 13 M Macintosh installing printer on wireless network 41 Macintosh printer software using 20 memory card scanning to 27 minimum system requirements 19 models, printer 6 N network setup page printing 48 Index networking finding IP address of computer 48 finding IP address of computer (Mac) 48 finding IP address of printer 48 IP addresses 48 notices 2, 52 O ordering ink cartridges 16 P page does not print 44 paper conserving 5 paper exit tray location 12 paper stop location 12 paper tray location 12 PDF creating from scan 28 Personal Identification Number method using 42 phone book 38 phone plug 34 phone splitter 32 photos printing from a flash drive 23 PictBridge and USB port location 12 power supply port location 13 Print dialog launching 20 print job canceling 23 print troubleshooting cannot delete documents from print queue 45 printer features 6 models 6 setting up 6 printer control panel buttons 13 location 12 using 13 printer does not respond 45 printer features 6 54 printer models 6 printer parts diagram 12 printer printing blank pages 44 printer problems, basic solutions 43 printer software installing 19 printers supported 24 printhead aligning 18 printhead access area location 13 printhead nozzles cleaning 18 printing documents 22 documents from a flash drive 23 network setup page 48 on both sides of the paper 22 photos from a flash drive 23 two‑sided 22 publications finding 5 Push Button Configuration method using 42 R receiving faxes Auto Answer setting 37, 40 automatically 40 manually 40 tips 40 recycling 5 replacing ink cartridges 16 RJ‑11 adapter 34 S safety information 2, 30 scan job canceling 28 scanner cover location 12 scanner glass location 12 scanner unit location 13 scanning creating a PDF from scan 28 documents for e‑mailing 27 tips 27 to a flash drive 27 to a local computer 27 to a memory card 27 using the touch screen 27 selecting the wireless port 50 sender information registering 37 sending faxes, tips 39 setting number of rings 38 setting up fax country‑ or region‑specific 34 digital telephone service 33 DSL connection 32 standard telephone line connection 30 VoIP connection 32 setting up printer 6 on wireless network (Macintosh) 41 on wireless network (Windows) 41 setup troubleshooting cannot print through USB 45 incorrect language appears on display 43 installation screen did not appear automatically 43 page does not print 44 printer does not respond 45 printer printing blank pages 44 software did not install 43 software did not install 43 Speed Dial list 38 supported file types 14 supported operating systems 19 supported printers 24 T technical support 43 telecommunication notices 52 tips for copying 25 e‑mailing 29 receiving faxes 39 scanning 27 sending faxes 39 Transmit Terminal Identification (TTI) setting 37 troubleshooting checking an unresponsive printer 43 contacting technical support 43 fax checklist 46 solving basic printer problems 43 wireless network 47 troubleshooting, fax cannot receive faxes 47 cannot run fax software 47 cannot send faxes 46 troubleshooting, print cannot delete documents from print queue 45 troubleshooting, setup cannot print through USB 45 incorrect language appears on display 43 installation screen did not appear automatically 43 page does not print 44 printer does not respond 45 printer printing blank pages 44 software did not install 43 troubleshooting, wireless cannot print over wireless network 48 two‑sided copying, automatic 25 two‑sided printing 22 U USB port location 13 V voice mail setting up 30 Voice over Internet Protocol (VoIP) fax setup 32 VoIP adapter 32 W Web Links accessing 20 Web site finding 5 Windows installing printer on wireless network 41 Windows software Abbyy Sprint OCR 19 Phone Book 19 Printer Home 19 Printer Setup Utility 19 Index Printing Preferences 19 Product Update 19 Status Messenger 19 Status Monitor Center 19 Tools for Office 19 Wireless Setup Utility 19 wireless network information needed for setting up wireless printing 41 installing printer on (Macintosh) 41 installing printer on (Windows) 41 troubleshooting 47 wireless setup information needed for 41 wireless troubleshooting cannot print over wireless network 48 Wi‑Fi Protected Setup configuring manually 42 using 41 Wi‑Fi Protected Setup logo identifying 41 55
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Pro710 Series Quick Reference Guide Creator : Lexmark International, Inc. Create Date : 2011:11:18 04:42:23-05:00 Creator Tool : AH Formatter V5.3 MR1 (5,3,2011,0610) for Windows Modify Date : 2011:11:18 04:42:23-05:00 Producer : Acrobat Distiller 9.4.6 (Windows) Keywords : v17541292 Document ID : uuid:4df3499d-c6fb-492f-aa66-a796092e20bb Instance ID : uuid:bc2f7a50-889e-45a3-aca7-216ec77f5a24 Page Mode : UseOutlines Page Count : 55 Author : Lexmark International, Inc.EXIF Metadata provided by EXIF.tools