MOBASE ELECTRONICS SYEBCM1611 Unit Assy-BCM & Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3074238
Application ID	Ph4DlzwlN/t+W4CiQf7V1g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.97kB (174611 bits)
Date Submitted	2016-07-22 00:00:00
Date Available	2017-01-18 00:00:00
Creation Date	2016-07-05 10:25:29
Producing Software	NesPDF
Document Lastmod	2016-07-20 15:27:58
Document Title	YB,HCr,SC,FB,HC,HCi_BCM_Rx인증자료_영문433_160616_A166A-105.xls
Document Creator	YB,HCr,SC,FB,HC,HCi_BCM_Rx인증자료_영문433_160616_A166A-105.xls
Document Author:	hs

Title :
NO.
Information Document
0.
GENERAL
0.1.
Make
Date
SEOYON ELECTRONICS
0.2.
Model No.
- Transmitter
- Receiver
0.3.
Remote Keyless Entry Transmitter
SYEC3TX1612
Unit Assy-BCM & Receiver
SYECBCM1611
Name and address of manufacturer
SEOYON ELECTRONICS
424, Sinwon-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
0.4.
Address of assembly plant
SEOYON ELECTRONICS
424, Sinwon-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
711, Baekseok-dong, Seobuk-gu, Cheonan-si, Chungcheongnam-do, Korea
Title :
NO.
Information Document
Information
Date
2.
PRODUCT SPECIFICATION
2.1
Remote Keyless Entry System
2.1.1
KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it
sends the ROLLING CODE to the RECEIVER by Radio Frequency.
2.1.2
RECEIVER : It receives the ROLLING CODE and decodes that,
thereafter RECEIVER drives the actuator.
2.2
SPECIFICATIONS
2.2.1
TRANSMITTER
2.2.2
ITEM
SPECIFICATION
Rated supply voltage
DC 3V
Operating voltage range
DC 2.5 ~ 3.2V
Operating temperature range
-20 ~+60℃
Storage temperature range
-30 ~ 80℃
Modulation
FSK
Frequency
433.92MHz
Code
Rolling Code(Hopping Algorithm)
Electric field strength
10mW (433.92MHz)
Battery life
3 Year(20Cycle/Day)(Lithium 3V 1EA)
Item
Specification
Rated Supply Voltage
DC 12V
Operating Voltage
DC 9 ~ 16V
Operating Temperature
- 35 ~ + 75℃
Max Humidity
95%
RECEIVER
Standby Current
Below than 4.0mA
(in alarm setting condition)
Title :
NO.
Information
Document
Information
Document
2.3
Date
Operating summary
① TRANSMITTER's button is pushed.
② TRANSMITTER sends the code by radio frequency.
③ RECEIVER gets the code and decodes it.
④ RECEIVER judges the code whether it is right code or not.
⑤ RECEIVER checks door lock or unlock Tail-Gate state.
⑥ RECEIVER drives the actuator.
2.3.1
LOCK & UNLOCK
① If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.
2.4
Caution
① Danger of explosion if battery is incorrectly replaced.
② Replace only with the same or equivalent type recommended by the manufacturer.
③ Dispose of used batteries according to the manufacturer's instructions.
Title :
NO.
InformationDocument
Document
Information
Information
Document
Date
3.
USER MANUAL
3.1
NAME : BCM system
- This system is BCM and inculdes RKE.
- RKE in BCM system is intended for auto door lock or unlock or TAIL-GATE in vehicle.
- This BCM system is to be installde on motor vehicles as *OE item.
*OE : Original Equipment.
*BCM : Body Control Module.
*RKE : Remote Keyless Entry.
3.2
SYSTEM CONSTRUCTION
3.2.1
SYSTEM IN VEHICLE
ANTENNA
BATTERY
ROLLING CODE
(433.92MHz)
RECEIVER
3.2.2
DOOR
ACTUATOR
SYSTEM FOR TEST
ANTENNA
BATTERY
LOCK or UNLOCK or TAIL-GATE DATA
ROLLING CODE
(433.92MHz)
RECEIVER
lamp
* Through the use of lamp, operating state is displayed by lamp.
lamp 'ON' means that actuator is operated by door lock or unlock or tail-gate output signal.
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the
following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human contact during normal
operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the
FCC radio frequency exposure limit.
"ATTENTION: L'exposition aux rayonnements à fréquence radioélectrique.
Antenne doit être montée de telle manière à minimiser le risque de contact humain pendant l'utilisation
normale. L'antenne ne doit pas être contacté pendant le fonctionnement pour éviter la possibilité de
dépasser la limite de l'exposition aux fréquences radio de la FCC.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes:
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : hs
Create Date                     : 2016:07:05 10:25:29+09:00
Modify Date                     : 2016:07:20 15:27:58+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : NesPDF
Creator Tool                    : YB,HCr,SC,FB,HC,HCi_BCM_Rx인증자료_영문433_160616_A166A-105.xls
Metadata Date                   : 2016:07:20 15:27:58+09:00
Format                          : application/pdf
Title                           : YB,HCr,SC,FB,HC,HCi_BCM_Rx인증자료_영문433_160616_A166A-105.xls
Creator                         : hs
Document ID                     : uuid:cfe4a8bc-2eb8-4365-ad84-454cbffa3567
Instance ID                     : uuid:4996f8b1-69f7-4188-9a22-c7583f84d858
Page Mode                       : UseNone
Page Count                      : 6

EXIF Metadata provided by EXIF.tools