MOJIX CBLENODE3K Star 3000 System User Manual USERMANUAL STAR3000 2 0 1x

Download:
Mirror Download [FCC.gov]
Document ID	1841974
Application ID	dgfYJz2cHL8Jq4Qzp4cs/Q==
Document Description	Users Manual Part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.34kB (391709 bits)
Date Submitted	2012-11-20 00:00:00
Date Available	2012-11-20 00:00:00
Creation Date	2012-11-20 09:34:54
Producing Software	Nitro PDF PrimoPDF
Document Lastmod	2012-11-20 09:35:06
Document Title	Microsoft Word - USERMANUAL-STAR3000-2 0 1.docx
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	Gus Mendoza

STAR 3000 Installation Manual
Figure 2: STAR System Topology
SYSTEM COMPONENTS
1. STAR
2. eMux: splitter and amplifier for the RF signal
3. eNode: controls up to 4 antennas to excite tags
4. Master Controller (MCON): application appliance
5. Optional Sensor network to detect activity in specific areas
Mojix Incorporated
www.mojix.com
(877) 886-6549
Page 9 of 36
Confidential and Proprietary
STAR 3000 Installation Manual
Wireless STAR System Topology
Figure 3 illustrates Wireless STAR system topology, showing:
1. STAR and power supply, including the command link antenna
2. Wireless 4-port eNode, including the command link antenna
3. Sensor port
4. eNode transmit antennas
5. MCON
Command Link
Receive Only Antenna
Command Link
Transmit Only Antenna
Wireless
TAR Reader
External Power Supply
Sensors
LAN line
Transmit Antenna
LAN
Power Supply
Wireless
4 Port eNode
Coaxial Cable
Master Controller
Tag
Figure 3: Wireless STAR System Topology
Mojix Incorporated
www.mojix.com
(877) 886-6549
Page 10 of 36
Confidential and Proprietary
STAR 3000 Installation Manual
STAR RECEIVER INSTALLATION
STAR Receiver Installation
The STAR is mechanically designed for post or wall mounting. Figure 4 illustrates the rear mounting
bracket. This bracket is designed to be used with any standard VESA mounting bracket. As shown in the
figure, the mounting bracket is installed directly on the STAR Receiver back plate.
Installation instructions:
1. Product installation shall be conducted by a qualified installer. The appropriate local engineer or
architect shall be consulted to ensure the wall and/or pole mount is capable of safely supporting up to
4 times the weight of the product.
2. Should the customer elect to mount the STAR to a flat surface (e.g. wall), holes are provided in the
main mounting bracket to accommodate a family of hardware (customer supplied).
3. When mounting STAR unit to a flat surface, a minimum of 4 fasteners are required,, though the exact
type is a function of the wall material and construction. Best industry practice is recommended.
a. For example:: toggle bolts or Molly bolts would be the first choice on hollow walls. Lead lag
shields would be recommended on solid (cast) concrete or brick. Nails are not
recommended, but could be used only if the wood material of the wall was at least 1.5" thick.
4. The STAR Receiver is first secured to the main bracket using the provided hardware. A standard
VESA bracket designed to hold 4 times the weight of the STAR unit should separately be mounted to
either a mast or a flat surface. The last step is to attach the STAR bracket to the VESA bracket.
Figure 4: STAR 3000 VESA Interface Mount Bracket
Mojix Incorporated
www.mojix.com
(877) 886-6549
Page 11 of 36
Confidential and Proprietary
STAR 3000 Installation Manual
Figure 5:: VESA Interface Mount Bracket Side View
Figure 6:: VESA Interface Mount Bracket Rear View
Figure 7:: VESA Interface Mount Bracket End Profile View
Mojix Incorporated
www.mojix.com
(877) 886-6549
Page 12 of 36
Confidential and Proprietary

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Gus Mendoza
Create Date                     : 2012:11:20 09:34:54-08:00
Modify Date                     : 2012:11:20 09:35:06-08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:11:20 09:35:06-08:00
Creator Tool                    : PrimoPDF http://www.primopdf.com
Format                          : application/pdf
Title                           : Microsoft Word - USERMANUAL-STAR3000-2 0 1.docx
Creator                         : Gus Mendoza
Document ID                     : uuid:ad709771-57f8-4933-853d-05da3160ca90
Instance ID                     : uuid:d8a0d914-488f-45b1-a1d5-ad5c2711b4d2
Producer                        : Nitro PDF PrimoPDF
Page Count                      : 4

EXIF Metadata provided by EXIF.tools