MOJIX CBLENODE3K Star 3000 System User Manual USERMANUAL STAR3000 2 0 1x

MOJIX, Inc. Star 3000 System USERMANUAL STAR3000 2 0 1x

UserManual.wiki >

CBLENODE3K User Manual >

Users Manual Part 3

Contents

Users Manual Part 3

STAR 3000 Installation Manual Mojix Incorporated www.mojix.com (877) 886-6549 Page 9 of 36 Confidential and Proprietary Figure 2: STAR System Topology SYSTEM COMPONENTS 1. STAR 2. eMux: splitter and amplifier for the RF signal 3. eNode: controls up to 4 antennas to excite tags 4. Master Controller (MCON): application appliance 5. Optional Sensor network to detect activity in specific areas

STAR 3000 Installation Manual Mojix Incorporated www.mojix.com (877) 886-6549 Page 10 of 36 Confidential and Proprietary Wireless STAR System Topology Figure 3 illustrates Wireless STAR system topology, showing: 1. STAR and power supply, including the command link antenna 2. Wireless 4-port eNode, including the command link antenna 3. Sensor port 4. eNode transmit antennas 5. MCON Figure 3: Wireless STAR System Topology LAN lineMaster ControllerWirelessTAR ReaderLANPower SupplyTransmit AntennaWireless4 Port eNode Coaxial CableSensorsExternal Power SupplyCommand LinkReceive Only AntennaCommand LinkTransmit Only AntennaTag

STAR 3000 Installation Manual Mojix Incorporated www.mojix.com (877) 886-6549 STAR RECEIVER INSTALLATIONSTAR Receiver Installation The STAR is mechanically designed for post bracket. This bracket is designed to be used with any standard VESA mounting bracket. figure, the mounting bracket is installed directly on the STARInstallation instructions: 1. Product installation shall be conducted by a qualified installer. architect shall be consulted to ensure the wall and/or pole mount is capable of safely4 times the weight of the product.2. Should the customer elect to mount the STARmain mounting bracket to accommodate a family of hardware3. When mounting STAR unit to a flat surface, a minimum of 4 fasteners are type is a function of the wall material and construction.a. For example: toggle bolts or Molly bolts would be the first choice on hollow walls.shields would be recommended on solid (cast) concrete or brick.recommended, but could be used only if the wood material of the wall was at 4. The STAR Receiver is first secured to the main bracket using the VESA bracket designed to hold 4 times the weight of the STAR unit should separately be mounted to either a mast or a flat surface. The last step is to attach the STAR bracket to the VESA bracket.Figure 4: INSTALLATION is mechanically designed for post or wall mounting. Figure 4 illustrates the rear mounting bracket. This bracket is designed to be used with any standard VESA mounting bracket. bracket is installed directly on the STAR Receiver back plate. shall be conducted by a qualified installer. The appropriate local engineer or architect shall be consulted to ensure the wall and/or pole mount is capable of safely4 times the weight of the product. Should the customer elect to mount the STAR to a flat surface (e.g. wall), holes are provided in the bracket to accommodate a family of hardware (customer supplied). unit to a flat surface, a minimum of 4 fasteners are required, though the exact type is a function of the wall material and construction. Best industry practice is recommended.: toggle bolts or Molly bolts would be the first choice on hollow walls.shields would be recommended on solid (cast) concrete or brick. Nails are not recommended, but could be used only if the wood material of the wall was at secured to the main bracket using the provided hardware.VESA bracket designed to hold 4 times the weight of the STAR unit should separately be mounted to or a flat surface. The last step is to attach the STAR bracket to the VESA bracket. STAR 3000 VESA Interface Mount Bracket Page 11 of 36 Confidential and Proprietary rear mounting bracket. This bracket is designed to be used with any standard VESA mounting bracket. As shown in the The appropriate local engineer or architect shall be consulted to ensure the wall and/or pole mount is capable of safely supporting up to to a flat surface (e.g. wall), holes are provided in the , though the exact Best industry practice is recommended. : toggle bolts or Molly bolts would be the first choice on hollow walls. Lead lag Nails are not recommended, but could be used only if the wood material of the wall was at least 1.5" thick. provided hardware. A standard VESA bracket designed to hold 4 times the weight of the STAR unit should separately be mounted to or a flat surface. The last step is to attach the STAR bracket to the VESA bracket.