Modular Mining Systems 302230 Spread Spectrum Transmitter User Manual Manual Page 31

Download:
Mirror Download [FCC.gov]
Document ID	285546
Application ID	1bFeHlKzY9QawJtCJd2muQ==
Document Description	Manual Page 31
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.76kB (272031 bits)
Date Submitted	2002-11-25 00:00:00
Date Available	2003-03-18 00:00:00
Creation Date	2002-11-19 10:31:22
Producing Software	Acrobat Distiller 4.05 for Sparc Solaris
Document Lastmod	2002-11-19 10:31:37
Document Title	Manual Page 31
Document Creator	FrameMaker 6.0

Chapter 2 — Hardware Installation
2-23
Once the attenuator is installed, you must connect cable 302202
(drawing 403516) to the attenuator and to the top of the PC to connect
the antenna to the built-in 2.4 GHz Cisco radio. Cable 302202 is
terminated at one end, as shown below. Minimize cable 302202 for
maximum power (six foot minimum for FCC compliance).
Figure 2.23
Figure 2.24
Terminated End of Cable 302202
Terminate the other end of cable 302202, as shown in drawing
403516.
Attach the terminated end to the attenuator and attach the other
end to the top of the PC. Make sure the bend radius is 3 - 4 inches.
Cable 302202 Attached to Attenuator
Revision A: October 2002

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:11:19 10:31:37-07:00
Create Date                     : 2002:11:19 10:31:22-07:00
Creator                         : FrameMaker 6.0
Producer                        : Acrobat Distiller 4.05 for Sparc Solaris
Page Count                      : 1

EXIF Metadata provided by EXIF.tools