Motorola Solutions 92FT7089 Mobile 2-Way Portable Radio with Bluetooth, Bluetooth LE and WiFi User Manual Installation Manual 1 of 4

Motorola Solutions, Inc. Mobile 2-Way Portable Radio with Bluetooth, Bluetooth LE and WiFi Installation Manual 1 of 4

UserManual.wiki >

Motorola Solutions >

92FT7089 User Manual >

Installation Manual 1 of 4 HTML Version

Installation Manual 1 of 4

-i

Page

APX™ TWO-WAY RADIOS

APX8500 MOBILE

RADIO

INSTALLATION MANUAL

aft

Draft

Foreword

This manual covers the O2, O3, O5, O7 and O9 models of the ASTRO® APX™ mobile radios. It includes all the information

necessary to install mid power radios and configure radio installation inside vehicles.

For details on radio operation or component-level troubleshooting, refer to the applicable manuals available separately. A

list of related publications is provided in the section “Related Publications”

RF Energy Exposure and Product Safety Guide for Mobile Two-way Radios

See “Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards,”.

Manual Revisions

Changes which occur after this manual is printed are described in PMRs (Publication Manual Revisions). These PMRs

provide complete replacement pages for all added, changed, and deleted items.

To obtain PMRs, go to https://businessonline.motorolasolutions.com.

Parts Ordering

See Appendix A: Replacement Parts Ordering for information on how to obtain replacement parts. For part numbers, refer

to the ASTRO APX Mobile Radio Basic Service Manual (Motorola Solutions publication).

Computer Software Copyrights

The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs

stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola

Solutions certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to

copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions

computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced,

modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions.

Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication,

estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the

normal non-exclusive license to use that arises by operation of law in the sale of a product.

Document Copyrights

No duplication or distribution of this document or any portion thereof shall take place without the express written permission

of Motorola Solutions. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means,

electronic or mechanical, for any purpose without the express written permission of Motorola Solutions.

Disclaimer

The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is

assumed for inaccuracies. Furthermore, Motorola Solutions reserves the right to make changes to any products herein to

improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or

use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.

Trademarks

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective

owners.

dia

ghted comghted com

ghted computeghted comput

Motorola Solutions prMotorola Solutions

stributed in any manner stributed in any man

rola Solutions products shall

rola Solutions produ

der the copyrights, patents order the copyrights, pa

arises arises

by operation of law inby operation o

any portion thereof shall take portion thereof s

e reproduceproduc

ed, distributed, or ted, distributed, or

xpress written permission of

xpress written permission o

elieved to be entelieved to be

es the righthe

assum

ssu

Installation Requirements for Compliance with

Radio Frequency (RF) Energy Exposure Safety

Standards

ATTENTION!

This radio is intended for use in occupational/controlled conditions, where users have full knowledge

of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is

NOT authorized for general population, consumer, or any other use.

To ensure compliance to RF Energy Exposure Regulations:

• Install only Motorola Solutions approved antennas and accessories

• Be sure that antenna installation is per “Antenna Installation” of this manual

• Be sure that Product Safety and RF Safety Booklet enclosed with this radio is available to the end user

upon completion of the installation of this radio

Before using this product, read the guide enclosed with your radio which contains important operating

instructions for safe usage and RF energy awareness and control for compliance with applicable standards

and regulations.

For a list of Motorola Solutions-approved antennas and other accessories, visit the following web site

which lists approved accessories for your radio model: http://www.motorolasolutions.com.

Draft

closedclosed

y awarenesy awarenes

tions-approved antennas

ions-approved ante

sories for your radio modesories for your radio

Table of Contents iii

MN003109A01

Table of Contents

Foreword..........................................................................................................i

RF Energy Exposure and Product Safety Guide for Mobile Two-way Radios..............................................i

Manual Revisions .........................................................................................................................................i

Parts Ordering ..............................................................................................................................................i

Computer Software Copyrights ....................................................................................................................i

Document Copyrights ...................................................................................................................................i

Disclaimer.....................................................................................................................................................i

Trademarks ..................................................................................................................................................i

Installation Requirements for Compliance with

Radio Frequency (RF) Energy Exposure Safety Standards.......................ii

Mobile Radio Model Numbering Scheme..................................................xiii

Commercial Warranty ..................................................................................xv

Limited Warranty .......................................................................................................................................xv

MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS .........................................................xv

I. What This Warranty Covers And For How Long ....................................................................xv

II. General Provisions ............................................................................................................... xvi

III. State Law Rights ................................................................................................................. xvi

IV. How To Get Warranty Service ............................................................................................ xvi

V. What This Warranty Does Not Cover................................................................................... xvi

VI. Patent And Software Provisions ........................................................................................ xvii

VII. Governing Law.................................................................................................................. xvii

Chapter 1 Introduction ......................................................................... 1-1

1.1 Mobile Radio Description............................................................................................................... 1-1

1.1.1 Dimensions ....................................................................................................................... 1-1

1.2 Standard Configurations ................................................................................................................ 1-6

1.2.1 Dash Mount Configuration ................................................................................................ 1-6

1.2.2 Remote Mount Configuration............................................................................................ 1-8

1.2.3 Multi Control Head .......................................................................................................... 1-11

1.3 Motorcycle Configurations ........................................................................................................... 1-11

1.4 Base/Control Stations .................................................................................................................. 1-11

1.5 Tools Required for APX Mobile Installations ............................................................................... 1-11

Chapter 2 Standard Configurations .................................................... 2-1

2.1 Planning the Installation................................................................................................................. 2-1

2.1.3 Radio Operation Wiring for Dash and Remote Configurations ....................................... 2-12

2.1.3.1 Dash Mount: Power, Ignition, and Emergency Cable Installation.......................... 2-12

2.1.3.2 Remote Mount: Power, Ignition, and Emergency Cable Installation...................... 2-13

2.1.4 Ignition Sense Switch (Radio Wide Advance) ................................................................ 2-15

2.1.5 Motorola Branded SB9600 Siren/PA Configuration/Programming ................................. 2-17

Draft

eringering

y ..................y ..................

.......

.......................................................................

S COMMUNICATION PROCOMMUNICATIO

overs And For How Long ..And For How

......................................................................

..........................................................................

e ..............................................................................

over...................................

over.................................

......................................

...............................

......................................................

......

iv Table of Contents

MN003109A01

2.2 Radio Mounting ........................................................................................................................... 2-18

2.2.2 Remote Mount with Trunnion.......................................................................................... 2-21

2.2.2.1 Remote Mount Control Head Installation............................................................... 2-21

2.2.2.2 Multiple Control Head Installation.......................................................................... 2-24

2.2.2.3 Cable Installation ................................................................................................... 2-26

2.2.2.4 Setting the Initial Control Head ID ......................................................................... 2-26

2.2.2.5 O3 Control Head and Remote Mount Cabling....................................................... 2-27

2.2.3 Locking Kit (Optional) .....................................................................................................2-29

2.2.3.1 All Radios .............................................................................................................. 2-29

2.3 Power Cables (Transceiver and Control Head) ........................................................................... 2-30

2.3.1 O2, O5, O7 or O9 Control Head Power Cables.............................................................. 2-30

2.3.2 Battery Selector Switch................................................................................................... 2-31

2.4 Antenna Installation ..................................................................................................................... 2-32

2.4.1 Selecting an Antenna Site/Location on a Metal Body Vehicle ........................................ 2-32

2.4.2 Multiplexers and Vehicle Installation............................................................................... 2-34

2.4.3 QMA Connection (APX8500 Only) ................................................................................. 2-34

2.4.4 GPS/GLONASS/Wi-Fi/Antenna Placement (APX8500 Only) ......................................... 2-34

2.5 Speaker ....................................................................................................................................... 2-35

2.5.1 Internal Speaker Disassembly ........................................................................................ 2-36

2.6 Microphone Hang-Up Clip ........................................................................................................... 2-38

2.6.1 Standard or O3 Control Head Hang-Up Clip .................................................................. 2-38

2.7 RFID (Option) .............................................................................................................................. 2-38

2.7.1 RFID Reading ................................................................................................................. 2-39

2.7.2 Programming RFID (If Equipped) ................................................................................... 2-41

2.8 Completing the Installation .......................................................................................................... 2-42

Chapter 3 Universal Relay Controller Installation ............................. 3-1

3.1 Universal Relay Controller Mounting ............................................................................................. 3-1

3.2 O7/O9 Universal Relay Controller Cable Assembly ...................................................................... 3-3

3.2.1 Power Cable ..................................................................................................................... 3-3

3.2.2 Ground Cable ................................................................................................................... 3-3

3.2.3 Wires ................................................................................................................................ 3-4

3.2.4 O7/O9 to URC Cable ........................................................................................................ 3-5

Chapter 4 Options and Accessories Installation ............................... 4-1

4.1 Dash-Mount Accessory Installation ............................................................................................... 4-1

4.1.1 Dash-Mount Emergency Pushbutton or Footswitch Installation ....................................... 4-1

4.1.2 Dash-Mount Horn and Lights (External Alarms) Relays ................................................... 4-2

4.2 Remote-Mount Accessory Installation ........................................................................................... 4-2

4.2.1 Emergency Pushbutton or Footswitch Installation............................................................ 4-3

4.2.2 Horn (External Alarm) Relay Installation........................................................................... 4-3

4.2.3 Lights (External Alarm) Relay Installation......................................................................... 4-3

4.2.4 Gunlock Installation .......................................................................................................... 4-3

4.2.5 Horn-Ring Transfer ........................................................................................................... 4-5

4.2.6 Record Audio Out Jack of Transmit and Receive Audio................................................... 4-5

4.2.7 Earphone Jack.................................................................................................................. 4-5

4.2.8 USB Data Cables.............................................................................................................. 4-6

4.2.9 RS232 Cables .................................................................................................................. 4-6

4.3 Vehicle Interface Port Overview .................................................................................................... 4-6

4.3.1 VIP Output Connections ................................................................................................... 4-7

4.3.2 VIP Input Connections......................................................................................................4-8

mbly ..mbly ..

..................................

trol Head Hang-Utrol Head Hang

...............................................................

.........................................

............................

(If Equipped) ...................(If Equipped) .......

...................................................

ContCon

roller Installatoller Inst

.........................................

.....................................

embly ...............................

embly ...........................

.................................

..............................

.................................................

........................

.............

Table of Contents v

MN003109A01

4.4 Accessory Connector Assembly Details (P2) ................................................................................ 4-9

4.4.1 Disassembly and Assembly .............................................................................................. 4-9

4.4.1.1 Disassembly ............................................................................................................ 4-9

4.4.1.2 Assembly ............................................................................................................... 4-10

4.5 Motorola Branded SB9600 Siren Connection to APX 8500......................................................... 4-11

4.6 Compatibility of Emergency when Attaching a Motorola Branded SB9600 Siren........................ 4-13

Chapter 5 Motorcycle Radio Installation ............................................ 5-1

5.1 Motorcycle Radio Description ........................................................................................................ 5-1

5.1.1 Transceiver Enclosure ......................................................................................................5-1

5.1.2 Control/Display Unit .......................................................................................................... 5-1

5.1.3 Control Head Cable .......................................................................................................... 5-1

5.1.4 Microphone ....................................................................................................................... 5-2

5.1.5 External Speaker .............................................................................................................. 5-2

5.1.6 Headset Capability............................................................................................................ 5-2

5.1.7 Antenna ............................................................................................................................ 5-2

5.1.8 Ignition Sense (ACC) Wire................................................................................................ 5-2

5.2 Installation Overview...................................................................................................................... 5-3

5.2.1 General ............................................................................................................................. 5-3

5.2.2 Important Motorcycle Installation Hints ............................................................................. 5-4

5.2.3 Parts Identification ............................................................................................................ 5-5

5.2.4 Order of Installation .......................................................................................................... 5-5

5.3 Installing the Universal Mounting Plate.......................................................................................... 5-6

5.4 Installing the Speaker and Control Head ....................................................................................... 5-7

5.4.1 Handlebar Installation with Speaker and Control Head Mounted Together...................... 5-8

5.4.2 Fuel Tank Console Installation with Speaker and Control Head Mounted Together ........ 5-9

5.4.3 Handlebar Installation with Speaker and Control Head Mounted Separately ................. 5-11

5.4.4 Fuel Tank Console Installation with Speaker and Control Head Mounted Separately ... 5-12

5.5 Installing the Speaker .................................................................................................................. 5-14

5.6 Installing the Microphone Hang-Up Clip ...................................................................................... 5-14

5.6.1 Extension Bracket Mounting ........................................................................................... 5-14

5.6.2 Speaker/Control Head Bracket Side Mounting ............................................................... 5-14

5.6.3 Other Hang-Up Clip Mounting ........................................................................................ 5-15

5.7 Installing Antenna Base, Cables and Multiplexer ........................................................................ 5-15

5.8 Installing the Antenna .................................................................................................................. 5-21

5.9 Cable Routing .............................................................................................................................. 5-21

5.10 Installing the Weather-Resistant Enclosure................................................................................. 5-23

5.11 Transceiver, Cabling and Multiplexer Installation ....................................................................... 5-24

5.11.1 Installing Cabling in the Enclosure.................................................................................. 5-24

5.11.2 Installing the Transceiver................................................................................................5-25

5.12 Installing the Emergency Switch Option ......................................................................................5-27

5.13 Installing the External Alarm Relay Option ..................................................................................5-27

5.14 Installing the Headset Accessory................................................................................................. 5-27

5.15 Installing the O5 Control Head Sunshield....................................................................................5-29

5.16 Horn/Lights Wiring ....................................................................................................................... 5-31

5.17 Emergency Switch Wiring............................................................................................................ 5-31

Chapter 6 Finishing the Installation.................................................... 6-1

6.1 Cable Connection .......................................................................................................................... 6-1

6.1.1 O2 Control Head............................................................................................................... 6-1

6.1.2 O3 Control Head............................................................................................................... 6-1

Draft

Wire

.........................

.........................................

rcycle Instrcycle

allation Htion

cation ............................

cation ....................

lation ...............................lation ................

ounting Plate....................ounting Plate..........

Control Head .....................Head ........

th Speaker and Control th Speaker and C

lation with Speaker and Coation with Speaker

Speaker and Control Headeaker and Control Head

with Speakewith Speake

r and Control

and Contr

.........................................

....................................

..............

...............................................

.................................................

ntin

g .........g ....

...........

vi Table of Contents

MN003109A01

6.1.3 O5 Control Head............................................................................................................... 6-1

6.1.4 O7 Control Head............................................................................................................... 6-2

6.1.5 O9 Control Head............................................................................................................... 6-2

6.2 Dust Cover Installation .................................................................................................................. 6-3

Chapter 7 Best Practices: Installation & Troubleshooting ............... 7-1

7.1 Check Wiring of Ignition and Radio Ignition Sensing..................................................................... 7-1

7.2 Check Physical Installation of Radio Ground and Radio Accessory Wiring .................................. 7-2

7.3 Improve the Electrical Quality of the Power and Ignition Lines ..................................................... 7-2

7.4 Minimize the Effect of Poorly Grounded Antennas........................................................................ 7-3

7.5 Jump-Start the Vehicle .................................................................................................................. 7-3

7.6 Eliminate Noise/Howling from PA Speaker ................................................................................... 7-3

Appendix A Replacement Parts Ordering..............................................A-1

A.1 Basic Ordering Information ............................................................................................................ A-1

A.2 Motorola Online Service and Support............................................................................................ A-1

A.3 Accessories Aftermarket Division (AAD) .......................................................................................A-2

Index .....................................................................................................Index-1

Glossary .........................................................................................Glossary-1

Related Publications

ASTRO APX Mobile Radio O2 Control Head User Guide.......................................................... 68012006035

ASTRO APX Mobile Radio O3 Control Head User Guide .......................................................... 6875946M01

ASTRO APX Mobile Radio O5 Control Head User Guide .......................................................... 6875947M01

ASTRO APX Mobile Radio O7 Control Head User Guide.......................................................... 68012006034

ASTRO APX Mobile Radio O9 Control Head User Guide ......................................................... 68007024014

ASTRO APX Mobile Radio Basic Service Manual .................................................................. MN003076A01

ASTRO APX Mobile Radio O2 Quick Reference Card ................................................................. PMLN6193

ASTRO APX Mobile Radio O3 Quick Reference Card ................................................................. PMLN5591

ASTRO APX Mobile Radio O5 Quick Reference Card ................................................................. PMLN5592

ASTRO APX Mobile Radio O7 Quick Reference Card ................................................................. PMLN6194

ASTRO APX Mobile Radio O9 Quick Reference Card ................................................................. PMLN5711

ASTRO APX Mobile Safety Manual ............................................................................................... NNTN7851

ASTRO APX Wi-Fi Provisioning Leaflet ................................................................................... MN001435A01

Draft

port....port....

on (AAD) ...on (AAD) ...

...........................

.....................

.....................................................

e.................................

e............................

...................................................

..........................

.................

List of Figures vii

MN003109A01

List of Figures

Figure 1-1. Front View of O2 Control Head Attached to APX 8500

Mid Power Dash Mount Transceiver and Trunnion .............................................................. 1-1

Figure 1-2. Side View of O2 Control Head Attached to APX 8500

Mid Power Dash Mount Transceiver and Trunnion ............................................................... 1-1

Figure 1-3. Front View of O3 Control Head with Coiled Cable................................................................ 1-1

Figure 1-4. Side View of O3 Control Head with Coiled Cable ................................................................. 1-1

Figure 1-5. Front View of O5 Control Head Attached to APX 8500

Mid Power Dash Mount Transceiver and Trunnion ............................................................... 1-2

Figure 1-6. Side View of O5 Control Head Attached to APX 8500 Mid Power

Dash Mount Transceiver and Trunnion................................................................................. 1-2

Figure 1-7. Front View of O7 Control Head Attached to APX 8500 Mid Power Dash Mount Transceiver

and Trunnion ......................................................................................................................... 1-2

Figure 1-8. Side View of O7 Control Head Attached to APX 8500 Mid Power Dash Mount Transceiver and

Trunnion................................................................................................................................ 1-2

Figure 1-9. Front View of Remote Mount and Trunnion .......................................................................... 1-2

Figure 1-10. Side View of Remote Mount and Trunnion ........................................................................... 1-2

Figure 1-11. Front View of O2 Control Head with Remote Mount and Trunnion....................................... 1-3

Figure 1-12. Side View of O2 Control Head with Remote Mount and Trunnion ........................................ 1-3

Figure 1-13. Front View of O5 Control Head with Remote Mount and Trunnion....................................... 1-3

Figure 1-14. Side View of O5 Control Head with Remote Mount and Trunnion ........................................ 1-3

Figure 1-15. Front View of O7 Control Head with Remote Mount and Trunnion....................................... 1-3

Figure 1-16. Side View of O7 Control Head with Remote Mount and Trunnion ........................................ 1-3

Figure 1-17. Front View of O9 Control Head with Trunnion ...................................................................... 1-4

Figure 1-18. Side View of O9 Control Head with Trunnion........................................................................ 1-4

Figure 1-19. Top View of O9 Universal Relay Controller with Trunnion (URC is an orderable accessory) 1-4

Figure 1-20. Side View of O9 UniversalRelay Controller with Trunnion(URC is an orderable accessory) 1-4

Figure 1-21. Siren and Lights Interface Module (SLIM) ............................................................................1-4

Figure 1-22. Front View of SB9600 Whelen Siren .................................................................................... 1-5

Figure 1-23. Siren/PA Cable Connections................................................................................................. 1-5

Figure 1-24. Dash Mount Configuration for O2 Control Head ................................................................... 1-6

Figure 1-25. Dash Mount Configuration for O3 Control Head ................................................................... 1-6

Figure 1-26. Dash Mount Configuration for O5 Control Head ................................................................... 1-7

Figure 1-27. Dash Mount Configuration for O7 Control Head ................................................................... 1-7

Figure 1-28. Remote Mount Configuration with Mid Power Transceiver, Transceiver Interface Board,

CHIB Rear Assembly and O2 Control Head ........................................................................ 1-8

Figure 1-29. Remote Mount Configuration with Mid Power Transceiver, Transceiver Interface Board and

O3 Control Head ................................................................................................................... 1-8

Figure 1-30. Remote Mount Configuration with Mid Power Transceiver, Transceiver Interface Board,

CHIB Rear Assembly and O5 Control Head ......................................................................... 1-9

Figure 1-31. Remote Mount Configuration with Mid Power Transceiver, Transceiver Interface Board, CHIB

Rear Assembly and O7 Control Head................................................................................... 1-9

Figure 1-32. Remote Mount Configuration with Mid Power Transceiver, Transceiver Interface Board and

O9 Control Head ................................................................................................................... 1-9

Figure 1-33. Remote Mount Configuration with Mid Power Radio Transceiver, Universal Relay Controller

and O7 Control Head (URC is optional).............................................................................. 1-10

Figure 1-34. Remote Mount Configuration with Mid Power Radio Transceiver, Universal Relay Controller

and O9 Control Head (URC is optional).............................................................................. 1-10

Figure 2-1. Dash Mount Radios Can Be Located in the Middle Console, on the Transmission Hump, or

Under the Dash..................................................................................................................... 2-2

Draft

unt

Mount andMount and

ntrol Head withntrol Head wi

ContCont

rol Head with Rrol Head with

5 Control Head with Re

5 Control Head wit

ContCont

rol Head with Remotad wit

ontrol Head with Reontrol Head with Re

mote M

rol Head with Remote Mouwith Rem

Head with Tread w

unnion ........unnion

ad with Trunnion..............ad with Trunnion...

ay Controller with TrunnionController with Trunnion

Controller with TrunnionController with Trunnion

(

SLIM) ...............................

SLIM) ...........................

.................................

..............................

................................................

ead .................

d ...........

viii List of Figures

Figure 2-2. Remote Mount Radio Control Heads Can Be Located in the Middle Console, on the Transmis-

sion Hump, or Under the Dash ............................................................................................. 2-2

Figure 2-3. Remote Mount of the Radio, O9 Control Head and Universal Relay Controller (URC is

optional) ................................................................................................................................ 2-2

Figure 2-4. Radio Installation (O2 Mid Power Dash Mount).................................................................... 2-3

Figure 2-5. Radio Installation (O3 Mid Power Dash Mount).................................................................... 2-3

Figure 2-6. Radio Installation (O5 Mid Power Dash Mount).................................................................... 2-4

Figure 2-7. Radio Installation (O7 Mid Power Dash Mount).................................................................... 2-4

Figure 2-8. Radio Installation (O2 Mid Power Remote Mount) ............................................................... 2-5

Figure 2-9. Radio Installation (O3 Mid Power Remote Mount) ............................................................... 2-6

Figure 2-10. Radio Installation (O5 Mid Power Remote Mount) ............................................................... 2-6

Figure 2-11. Radio Installation (O7 Mid Power Remote Mount) ............................................................... 2-7

Figure 2-12. Radio Installation of O9 Remote Mount with Transceiver (URC is optional) ........................ 2-7

Figure 2-13. Radio Installation (O9 Remote Mount with Pinouts) ............................................................. 2-8

Figure 2-14. Remote Control Head Pinouts .............................................................................................. 2-8

Figure 2-15. Cabling Interconnect Diagram for Dash Mount..................................................................... 2-9

Figure 2-16. Cabling Interconnect Diagram for Remote Mount .............................................................. 2-10

Figure 2-17. Cabling Interconnect Diagram for 09 Remote Mount (URC is optional) ..............................2-11

Figure 2-18. APX8500 Mid Power Trunnion Orientation ......................................................................... 2-18

Figure 2-19. Transmission Hump Trunnion Mounting ............................................................................. 2-20

Figure 2-20. Below Dash Trunnion Mounting.......................................................................................... 2-20

Figure 2-21. O5 Control Head Installation Exploded View (Also applicable for O2 and O7

Control Heads) ........................................................................................................................................ 2-22

Figure 2-22. O9 Control Head Installation Exploded View...................................................................... 2-23

Figure 2-23. O5 and O9 Control Head Rear View .................................................................................. 2-23

Figure 2-24. Multiple Control Heads Parallel Configurations .................................................................. 2-24

Figure 2-25. Multiple Control Heads Series Configurations .................................................................... 2-25

Figure 2-26. APX Mobile O5 Control Head Front View........................................................................... 2-26

Figure 2-27. Radio Display with Current Control Head ID ...................................................................... 2-26

Figure 2-28. APX Mobile O5 Control Head Front View – Mode Knob .................................................... 2-26

Figure 2-29. O3 Control Head................................................................................................................. 2-27

Figure 2-30. O3 Control Head Rear View ............................................................................................... 2-28

Figure 2-31. Hang-Up Clip Installation Exploded View ........................................................................... 2-28

Figure 2-32. Locking Kit (Optional) ........................................................................................................ 2-29

Figure 2-33. HKN6188_ Power Cable with External Speaker Connector ............................................... 2-30

Figure 2-34. HKN6187_ Power Cable with External Speaker Connector, Record

Audio Output Jack (2.5 mm) and Earphone Jack (2.5 mm)................................................ 2-31

Figure 2-35. Battery Selector Switch....................................................................................................... 2-31

Figure 2-36. Multiple Antennas Separation for locations 1-10 ................................................................ 2-33

Figure 2-37. Multiplexer Views................................................................................................................ 2-34

Figure 2-38. GPS/GLONASS and Wi-Fi Antenna Connector on the Back of the Mid Power Radio ....... 2-34

Figure 2-39. Speaker Mounting............................................................................................................... 2-35

Figure 2-40. Removing the screws on the Control Head ........................................................................ 2-36

Figure 2-41. Removing the Control Head ............................................................................................... 2-36

Figure 2-42. Disconnecting the Speaker Connector ............................................................................... 2-37

Figure 2-43. Reattaching the Control Head ............................................................................................ 2-37

Figure 2-44. RFID Location on Mid Power Radio ................................................................................... 2-38

Figure 2-45. Read Angle for Mid Power Radio........................................................................................ 2-39

Figure 2-46. Tag Angle for Mid Power Radio .......................................................................................... 2-39

Figure 2-47. Examples of Reader and Tag Aligned (Reader Orientation)............................................... 2-40

Figure 2-48. Example of Reader and Tag Misaligned (Reader Orientation) ........................................... 2-40

Figure 3-1. Universal Relay Controller Orientation ................................................................................. 3-1

Figure 3-2. Universal Relay Controller Installation Exploded View ......................................................... 3-2

Figure 3-3. Power and Ground Cable Glands......................................................................................... 3-3

Draft

on Orion Or

nion Mountinion Mount

Mounting...........Mounting..........

stallation Explstallat

oded Vieded

.........................................

............................

allation Exploded View......allation Exploded V

d Rear View ......................Rear View ...........

allel ConfigurConfig

ations ..........tion

ConfigurCon

ations ................ons ......

ont View...........................View...............

Head ID ...........................ead ID ..........................

ew – Mode Knob .............

ew – Mode Knob ...........

......................................

................................

......................................................

....................................

............

nne

List of Figures ix

MN003109A01

Figure 3-4. Cable Gland Assembly with Gasket...................................................................................... 3-4

Figure 3-5. Wires Installation................................................................................................................... 3-4

Figure 3-6. Wire Installation with Black Stick .......................................................................................... 3-5

Figure 3-7. O7/O9 to URC Cable Installation .......................................................................................... 3-5

Figure 4-1. Emergency Switch Wiring Diagram ......................................................................................4-1

Figure 4-2. Horn/Light Wiring Diagram.................................................................................................... 4-2

Figure 4-3. Radio MAP Connector .......................................................................................................... 4-2

Figure 4-4. Gunlock Switch Redundancy Diagram ................................................................................. 4-4

Figure 4-5. Siren/PA Horn-Ring Connections.......................................................................................... 4-5

Figure 4-6. Remote Control Head Pinouts .............................................................................................. 4-6

Figure 4-7. HKN6196_ VIP Connector Detail.......................................................................................... 4-6

Figure 4-8. Relay Coil.............................................................................................................................. 4-7

Figure 4-9. Exploded View of Accessory Connector Assembly (HLN6863_) ........................................ 4-10

Figure 4-10. J600 Accessory Connector Y-Cable KT000247A01............................................................ 4-11

Figure 4-11. Pinout for cable KT000247A01 ........................................................................................... 4-11

Figure 4-12. Interfacing the Y-cable to the Motorola Branded SB9600 Siren and External Accessories 4-12

Figure 4-13. Field adjustment for Emergency Operation with Siren Accessory ...................................... 4-13

Figure 4-14. Location for Pin 8 ................................................................................................................ 4-13

Figure 5-1. Identification of a Motorcycle Radio by Using a Label .......................................................... 5-1

Figure 5-2. Universal Mounting Plate Installation (Part of Radio Enclosure Kit) ..................................... 5-6

Figure 5-3. Motorcycle Control Head Cabling (3075217A01) ................................................................. 5-7

Figure 5-4. Handlebar Installation with Speaker and Control Head Mounted Together .......................... 5-8

Figure 5-5. Fuel Tank Console Installation with Speaker and Control Head Mounted Together ........... 5-10

Figure 5-6. Handlebar Installation with Speaker and Control Head Mounted Separately ..................... 5-12

Figure 5-7. Fuel Tank Console Installation with Speaker and Control Head Mounted Separately........ 5-13

Figure 5-8. Antenna Band Identification ................................................................................................ 5-15

Figure 5-9. Antenna Port Locations....................................................................................................... 5-16

Figure 5-10. Routing the GPS/Wi-Fi Cable ............................................................................................. 5-17

Figure 5-11. Routing the VHF Antenna Cable......................................................................................... 5-18

Figure 5-12. Routing the 700/800 Antenna Cable...................................................................................5-18

Figure 5-13. Routing the UHF Antenna Cable......................................................................................... 5-19

Figure 5-14. Multiplexer and Trunnion Mounting..................................................................................... 5-19

Figure 5-15. Cable Routing ..................................................................................................................... 5-20

Figure 5-16. Cable from Radio to Multiplexer.......................................................................................... 5-20

Figure 5-17. Cable Routing ..................................................................................................................... 5-21

Figure 5-18. Weather-Resistant Enclosure Installation ........................................................................... 5-23

Figure 5-19. Installing Cables.................................................................................................................. 5-25

Figure 5-20. Installing the Transceiver .................................................................................................... 5-26

Figure 5-21. Motorcycle Wiring Harness Rework....................................................................................5-28

Figure 5-22. Remote Mount Trunnion with Sunshield ............................................................................. 5-29

Figure 5-23. Position the Sunshield ........................................................................................................ 5-29

Figure 5-24. Slide the Control Head onto Trunnion................................................................................. 5-30

Figure 5-25. Position Control Head as Desired....................................................................................... 5-30

Figure 5-26. Horn/Lights Wiring Diagram................................................................................................ 5-31

Figure 5-27. Emergency Switch Wiring Diagram .................................................................................... 5-31

Figure 6-1. Dust Cover Installation Locations ......................................................................................... 6-3

Draft

ycle Rycle R

ate ate

InstallatInstalla

HeHe

ad Cabling (3ad Cabling (

lation lation

with Speaker anake

ole Installation with Speak

ole Installation with

tion tion

with Speaker and with Speaker a

Con

nstallation with Spstallation with Sp

eaker anea

ation......................................................

.....................................................................

e ................

............................................

e.............................................................................

e.......................................

e....................................

.....

................................

...........................

................................................

.......................

..................

xList of Tables

6878215A01

List of Tables

Table 2-1. Dash and Remote O2, O3, O5, O7 or O9 Radio Power ON @ J2 ................................ 2-14

Table 2-2. Remote O2, O5, O7 or O9 Radio Power ON @ J200.................................................... 2-14

Table 2-3. Ignition Interface Cables ................................................................................................ 2-14

Table 2-4. Ignition Sense Switch Settings in CPS........................................................................... 2-15

Table 2-5. Power Level Configurations ........................................................................................... 2-17

Table 2-6. Mid Power Trunnion Kit.................................................................................................. 2-19

Table 2-7. Available CAN Cables.................................................................................................... 2-25

Table 2-8. Power Cables................................................................................................................. 2-30

Table 2-1. Model Number Chart in 12-Digit ASCII Format .............................................................. 2-41

Table 2-2. Serial Number with Radio Band/Tier/Power................................................................... 2-41

Table 4-1. VIP Output Connections................................................................................................... 4-7

Table 4-2. VIP Input Connections ..................................................................................................... 4-8

Table 5-1. Transceiver Installation Parts List .................................................................................. 5-27

Draft

List of Tables xi

6878215A01

Notes

Draft

xii List of Tables

6878215A01

Draft

MN003109A01_aa

Mobile Radio Model Numbering Scheme xiii

Mobile Radio Model Numbering Scheme

Position 1 - Type of Unit

M = Mobile

L = Table Top Station

Positions 2 & 3 - Model Series

Position 4 - Frequency Band

Less than 29.7MHz

29.7 to 35.99MHz

36 to 41MHz

42 to 50MHz

300 to 345MHz

66 to 80MHz

74 to 90MHz

Product Specific

VHF Range

136 to 162MHz

146 to 178MHz

174 to 210MHz

190 to 235MHz

330 to 370MHz

366 to 410MHz

403 to 437MHz

438 to 482MHz

470 to 620MHz

Product Specific

806 to 870MHz*

825 to 870MHz

896 to 941MHz

403-470MHz

1.0 to 1.6GHz

1.5 to 2.0GHz

Position 5 - Power Level

0 to 0.7 Watts

0.7 to 0.9 Watts

1.0 to 3.9 Watts

4.0 to 5.0 Watts

5.1 to 6.0 Watts

6.1 to 10 Watts

10.1 to 15 Watts

16 to 25 Watts

26 to 35 Watts

Position 6 - Physical Packages

RF Modem Operation

Receiver Only

Standard Control; No Display

Standard Control; With Display

Limited Keypad; No Display

Limited Keypad; With Display

Full Keypad; No Display

Full Keypad; With Display

Limited Controls; No Display

Limited Controls; Basic Display

Limited Controls; Limited Display

Rotary Controls; Standard Display

Enhanced Controls; Enhanced Display

Low Profile; No Display

Low Profile; Basic Display

Low Profile; Basic Display, Full Keypad

Tranceiver with Selectable Control Head

VDV Control Head

Control Head #2

Position 7 - Channel Spacing

0 =

1 = 5KHz

2 = 6.25KHz

3 = 10KHz

4 = 12.5KHz

5 = 15KHz

6 = 20/25KHz

7 = 30KHz

8 = 12.5/25KHz

9 = Variable/Programmable

Typical Model Number:

Position:

Position 8 - Primary Operation

Conventional/Simplex

Conventional/Duplex

Trunked Twin Type

Dual Mode Trunked

Dual Mode Trunked/Duplex

Trunked Type I

Trunked Type II

FDMA* Digital Dual Mode

TDMA** Digital Dual Mode

Single Sideband

Global Positioning Satellite Capable

Amplitude Companded Sideband (ACSB)

Digital Dispatch

Programmable

Digital Interconnect

Digital Multi-Service

9600 Capable

TDMA

* FDMA = Frequency Division Multiple Access

** TDMA = Time Division Multiple Access

Position 9 - Primary System Type

Conventional

Privacy Plus

Clear SMARTNET

Advanced Conventional Stat-Alert

Enhanced Privacy Plus

Nauganet 888 Series

Japan Specialized Mobile Radio (JSMR)

Multi-Channel Access (MCA)

CoveragePLUS

MPT1327* - Public

MPT1327* - Private

Radiocom

Tone Signalling

Binary Signalling

Phonenet

IDEN Basic

IDEN Advanced Feature

JSMR Digital

LTR Protocol

Single Sideband

Programmable

Secure Conventional

Secure SMARTNET

TETRA

SmartZone

* MPT = Ministry of Posts and Telecommunications

Position 10 - Feature Level

1 = Basic

2 = Limited Package

3 = Limited Plus

4 = Intermediate

5 = Standard Package

6 = Standard Plus

7 = Expanded Package

8 = Expanded Plus

9 = Full Feature/

Programmable

Position 11 - Version

Version Letter (Alpha) - Major Change

Position 12 -

Unique Model Variations

C = Cenelec

N = Standard Package

Positions 13 - 16

SP Model Suffix

1 23 4 5 6 7 8 9 10 11 1213141516

M37 T S S 9 P W 1 A N S P 0 1

30 = APX 7500 24 = APX 2500

25 = APX 6500 22 = APX 4500

36 = APX1500 37 = APX 8500

36 to 60 Watts

61 to 110 Watts

Up to 125 Watts

1 to 25 Watts

25 to 40 Watts

25 to 45 Watts

10 to 35 Watts

10 to 50 Watts

25 to 110 Watts

* For APX 7500 "K" in Position 4 represents

136-174MHz.

* For APX 7500 "Q" in Position 4 represents

380-470MHz.

* For APX 7500 "S" in Position 4 represent

470-520MHz.

* For APX 7500 "U" in Position 4 represent

762-870MHz.

Note: Values represented are not absolute,

and are given to indicate range only.

Note: Values represented are not absolute,

and are given to indicate range only.

Model Series

UHF Range

Draft

6GHz

2.0GH

Dra

hone

IDEN Ba

IDEN Adv

JSMR Digita

TR Proto

Single Sid

Programm

epresen

n 4 rep

represe

ent

MN003109A01_aa

Notes

xiv Mobile Radio Model Numbering Scheme

Draft

MN003109A01_aa

Commercial Warranty xv

Commercial Warranty

Limited Warranty

MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS

I. What This Warranty Covers And For How Long

MOTOROLA SOLUTIONS INC. (“MOTOROLA”) warrants the MOTOROLA SOLUTIONS

manufactured Communication Products listed below (“Product”) against defects in material and

workmanship under normal use and service for a period of time from the date of purchase as

scheduled below:

Motorola Solutions, at its option, will at no charge either repair the Product (with new or

reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of

the Product during the warranty period provided it is returned in accordance with the terms of this

warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty

period. All replaced parts of Product shall become the property of MOTOROLA SOLUTIONS.

This express limited warranty is extended by MOTOROLA SOLUTIONS to the original end user

purchaser only and is not assignable or transferable to any other party. This is the complete warranty

for the Product manufactured by MOTOROLA SOLUTIONS. MOTOROLA SOLUTIONS assumes no

obligations or liability for additions or modifications to this warranty unless made in writing and

signed by an officer of MOTOROLA SOLUTIONS. Unless made in a separate agreement between

MOTOROLA SOLUTIONS and the original end user purchaser, MOTOROLA SOLUTIONS does not

warrant the installation, maintenance or service of the Product.

MOTOROLA SOLUTIONS cannot be responsible in any way for any ancillary equipment not

furnished by MOTOROLA SOLUTIONS which is attached to or used in connection with the Product,

or for operation of the Product with any ancillary equipment, and all such equipment is expressly

excluded from this warranty. Because each system which may use the Product is unique,

MOTOROLA SOLUTIONS disclaims liability for range, coverage, or operation of the system as a

whole under this warranty.

ASTRO APX Mobile Radio One (1) Year

Product Accessories One (1) Year

Draft

ts option, will at no chargets option, will at n

ace it (with a new or recondce it (with a new or

nty period provided it isty period provide

ards are warranted for the s are warranted f

ct shall ct

become the propebecome the

ded by ed b

MOTOROLA SOLUMOTOROLA SOLU

ransferable to any other pa

ransferable to any other p

LA A

SOLUTIONS. MOSOLUTIONS. MO

TOR

ions to this warrns to this warr

antyan

Unless made Unless m

purchasurc

Pro

e R

ssoriesssorie

MN003109A01_aa

xvi Commercial Warranty

II. General Provisions

This warranty sets forth the full extent of MOTOROLA SOLUTIONS'S responsibilities regarding the

Product. Repair, replacement or refund of the purchase price, at MOTOROLA SOLUTIONS's option,

is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS

WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA

SOLUTIONS BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE

PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS,

LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL

EXTENT SUCH MAY BE DISCLAIMED BY LAW.

III. State Law Rights

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY.

This warranty gives specific legal rights, and there may be other rights which may vary from state to

state.

IV. How To Get Warranty Service

You must provide proof of purchase (bearing the date of purchase and Product item serial number)

in order to receive warranty service and, also, deliver or send the Product item, transportation and

insurance prepaid, to an authorized warranty service location. Warranty service will be provided by

Motorola Solutions through one of its authorized warranty service locations. If you first contact the

company which sold you the Product, it can facilitate your obtaining warranty service. You can also

call Motorola Solutions at 1-888-567-7347 US/Canada.

V. What This Warranty Does Not Cover

A. Defects or damage resulting from use of the Product in other than its normal and customary

manner.

B. Defects or damage from misuse, accident, water, or neglect.

C. Defects or damage from improper testing, operation, maintenance, installation, alteration,

modification, or adjustment.

D. Breakage or damage to antennas unless caused directly by defects in material workmanship.

E. A Product subjected to unauthorized Product modifications, disassemblies or repairs

(including, without limitation, the addition to the Product of non-Motorola Solutions supplied

equipment) which adversely affect performance of the Product or interfere with Motorola

Solutions's normal warranty inspection and testing of the Product to verify any warranty

claim.

F. Product which has had the serial number removed or made illegible.

G. Rechargeable batteries if:

- any of the seals on the battery enclosure of cells are broken or show evidence of

tampering.

- the damage or defect is caused by charging or using the battery in equipment or service

other than the Product for which it is specified.

H. Freight costs to the repair depot.

al rights, aal rights, a

rvice

urchase (bearing the daurchase (bearing th

rvice and, also, device and, also, de

liver or sl

ed warranty servwarranty serv

ice locatioice

s authorized warrantys authorized warran

serv

t can facilitate your obtainin facilitate your obtaini

7 US/Canada.US/Canada.

e PrPr

oduct in othuct in

MN003109A01_aa

Commercial Warranty xvii

I. A Product which, due to illegal or unauthorized alteration of the software/firmware in the

Product, does not function in accordance with MOTOROLA SOLUTIONS’s published

specifications or the FCC certification labeling in effect for the Product at the time the Product

was initially distributed from MOTOROLA SOLUTIONS.

J. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of

the Product.

K. Normal and customary wear and tear.

VI. Patent And Software Provisions

MOTOROLA SOLUTIONS will defend, at its own expense, any suit brought against the end user

purchaser to the extent that it is based on a claim that the Product or parts infringe a United States

patent, and MOTOROLA SOLUTIONS will pay those costs and damages finally awarded against the

end user purchaser in any such suit which are attributable to any such claim, but such defense and

payments are conditioned on the following:

A. that MOTOROLA SOLUTIONS will be notified promptly in writing by such purchaser of any

notice of such claim;

B. that MOTOROLA SOLUTIONS will have sole control of the defense of such suit and all

negotiations for its settlement or compromise; and

C. should the Product or parts become, or in MOTOROLA SOLUTIONS's opinion be likely to

become, the subject of a claim of infringement of a United States patent, that such purchaser

will permit MOTOROLA SOLUTIONS, at its option and expense, either to procure for such

purchaser the right to continue using the Product or parts or to replace or modify the same so

that it becomes noninfringing or to grant such purchaser a credit for the Product or parts as

depreciated and accept its return. The depreciation will be an equal amount per year over the

lifetime of the Product or parts as established by MOTOROLA SOLUTIONS.

MOTOROLA SOLUTIONS will have no liability with respect to any claim of patent infringement which

is based upon the combination of the Product or parts furnished hereunder with software, apparatus

or devices not furnished by MOTOROLA SOLUTIONS, nor will MOTOROLA SOLUTIONS have any

liability for the use of ancillary equipment or software not furnished by MOTOROLA SOLUTIONS

which is attached to or used in connection with the Product. The foregoing states the entire liability of

MOTOROLA SOLUTIONS with respect to infringement of patents by the Product or any parts

thereof.

Laws in the United States and other countries preserve for MOTOROLA SOLUTIONS certain

exclusive rights for copyrighted MOTOROLA SOLUTIONS software such as the exclusive rights to

reproduce in copies and distribute copies of such Motorola Solutions software. MOTOROLA

SOLUTIONS software may be used in only the Product in which the software was originally

embodied and such software in such Product may not be replaced, copied, distributed, modified in

any way, or used to produce any derivative thereof. No other use including, without limitation,

alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA

SOLUTIONS software or exercise of rights in such MOTOROLA SOLUTIONS software is permitted.

No license is granted by implication, estoppel or otherwise under MOTOROLA SOLUTIONS patent

rights or copyrights.

VII. Governing Law

This Warranty is governed by the laws of the State of Illinois, USA.

Draft

UTIONSUTIONS

ettlement or coettlement or c

uct or parts become, ouct or parts becom

ubject of a claim of

bject of a claim of

infringe

ROLA SOLUTIONS, at its ROLA SOLUTIONS

o continue using the Produo continue using the

inging or to grant such purg or to grant su

s returetu

rn. The depreciation deprec

ts as s

established by MOTOestablished by MOT

ability with respect to any

ability with respect to an

uct or uct or

parts furnished here

parts furnished he

LUTIONS, nor will MO

UTIONS, nor will M

ware not furnware not furn

ishh

Product. Toduct

nt of nt of

MN003109A01_aa

Notes

xviii Commercial Warranty

Draft

Chapter 1 Introduction

This manual covers the installation procedures for ASTRO APX mobile and motorcycle radios with

O2, O3, O5, O7 and O9 control heads, and accessories required to complete the radio system. The

radio system consists of a control head, radio, antenna, microphone, speaker, cabling, Universal

Relay Controller (URC), and accessories.

1.1 Mobile Radio Description

1.1.1 Dimensions

When installing the radio, make sure to plan the installation carefully and leave additional room in the

rear of the radio for cabling and accessory connections; in the front of the radio for access, controls,

and cabling (if remote mount); and to the sides of the radio so that you may access and install the

trunnion screws/wing screws.

NOTE: The measurement unit used in Figure 1-1 to Figure 1-20 is millimeter.

Figure 1-1. Front View of O2 Control Head Attached

to APX 8500

Mid Power Dash Mount Transceiver and Trunnion

Figure 1-2. Side View of O2 Control Head

Attached to APX 8500

Mid Power Dash Mount Transceiver and Trunnion

Figure 1-3. Front View of O3 Control

Head with Coiled Cable

Figure 1-4. Side View of O3 Control

Head with Coiled Cable

206

306

293

153

Draft

used inused i

Figure 1-2. SFigure 1-2.

id Power DPowe

MN003109A01_aa

1-2 Introduction Mobile Radio Description

Figure 1-9 and Figure 1-10, show the basic dimensions of the remote mount transceiver trunnion

APX mobile radio.

Figure 1-5. Front View of O5 Control Head

Attached to APX 8500

Mid Power Dash Mount Transceiver and Trunnion

Figure 1-6. Side View of O5 Control Head

Attached to APX 8500 Mid Power

Dash Mount Transceiver and Trunnion

Figure 1-7. Front View of O7 Control Head

Attached to APX 8500 Mid Power Dash Mount

Transceiver and Trunnion

Figure 1-8. Side View of O7 Control Head Attached

to APX 8500 Mid Power Dash Mount Transceiver

and Trunnion

Figure 1-9. Front View of Remote Mount and

Trunnion

Figure 1-10. Side View of Remote Mount and

Trunnion

178

206 286

274

206

178

291

278

206

178

261

Draft

s of the of th

Figure 1-8. Side Viegure 1-8. Side Vie

to APX 8500 Mid Pow

to APX 8500 Mid P

and

MN003109A01_aa

Introduction Mobile Radio Description 1-3

Figure 1-11. Front View of O2 Control Head with

Remote Mount and Trunnion

Figure 1-12. Side View of O2 Control Head with

Remote Mount and Trunnion

Figure 1-13. Front View of O5 Control Head with

Remote Mount and Trunnion

Figure 1-14. Side View of O5 Control Head with

Remote Mount and Trunnion

Figure 1-15. Front View of O7 Control Head with

Remote Mount and Trunnion

Figure 1-16. Side View of O7 Control Head with

Remote Mount and Trunnion

209

123

180

209

178

108

Draft

with th

Figure 1-14. Side

Figure 1-14. Si

Remot

Rem

Dra

5151

MN003109A01_aa

1-4 Introduction Mobile Radio Description

Figure 1-21. Siren and Lights Interface Module (SLIM)

Figure 1-17. Front View of O9 Control Head with

Trunnion

Figure 1-18. Side View of O9 Control Head with

Trunnion

Figure 1-19. Top View of O9 Universal Relay

Controller with Trunnion (URC is an

orderable accessory)

Figure 1-20. Side View of O9 Universal Relay

Controller with Trunnion (URC is an orderable

accessory)

178

190 83

185

210

61.5

Draft

Dra

MN003109A01_aa

Introduction Mobile Radio Description 1-5

Figure 1-22. Front View of SB9600 Whelen Siren

Figure 1-23. Siren/PA Cable Connections

Siren/PA Unit

T-Cable for Dual Control

Head Only

To Switch Box or

DEK

Speaker

Leads

Red Fused Cable

Connects to Battery

Positive Terminal

Black Chassis

Ground Cable

Draft

aft

raft

Motorola Solutions 92FT7089 Mobile 2-Way Portable Radio with Bluetooth, Bluetooth LE and WiFi User Manual Installation Manual 1 of 4

Motorola Solutions, Inc. Mobile 2-Way Portable Radio with Bluetooth, Bluetooth LE and WiFi Installation Manual 1 of 4

Contents

Installation Manual 1 of 4

Navigation menu

Namespaces

Views

Navigation