NCR RSD Atlanta 7730GAI Electronic Pricing Transmitter User Manual Manual Chapter 4

Download:
Mirror Download [FCC.gov]
Document ID	144932
Application ID	l7zKBa6Dk7g7DYC6W0sqpw==
Document Description	Manual Chapter 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	3.44kB (43009 bits)
Date Submitted	2001-04-13 00:00:00
Date Available	2001-05-29 00:00:00
Creation Date	2001-04-16 07:15:32
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-04-16 07:15:33
Document Title	Manual Chapter 4

Chapter 4: Installing DecisioNet Software on a
Windows NT or Windows 2000 System
System Environment for Windows NT
The DecisioNet System requirements are as follows:
•
A PC with an Intel 800 MHz or higher processor
•
Minimum memory: 128 MB
•
Minimum hard disk space: 10 GB
•
CD-ROM Drive
•
Color CRT (VGA)
•
Mouse
•
RS-232 Port
•
Ethernet
•
Wedge Keyboard Scanner (for reading ESL serial numbers)
•
Windows NT 4.0 (Service Pack 6) or Windows 2000 (Service Pack 1)
•
Remote access software, such as Timbuktu or pcAnywhere
4-2
Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
`DecisioNet Software for Windows NT and
Windows 2000
The DecisioNet software for Windows NT and Windows 2000 is
provided on CD-ROM.
Name
LPIN
DecisioNet Base Software for NT/2000
DecisioNet Base Runtime Package
DecisioNet Standalone Item Maintenance
G370-1938-0000
DecisioNet Scan-Merge Package for
Windows NT/2000
DecisioNet Merge Utility
DecisioNet OPC Utility
G370-1944-0000
DecisioNet Application Development
Environment for Windows NT/2000
G370-1941-0000
(Controlled)
(GCA deliverable)
DecisioNet Software Installation
The following sections describe how to install DecisioNet software on a
Windows NT or a Windows 2000 system. After installation, refer to
Chapter 6, “Configuring the DecisioNet System Environment” for any
additional information you may need.
Before installing the DecisioNet software, make sure the hard disk has
at least 35 megabytes of free space. Additional space is required for the
DecisioNet MySQL database. Make sure all programs are stopped
before installing the software.
Note: Before installing new DecisioNet 3.0 software, remove any old
DecisioNet 3.0 software from the system. Refer to the Uninstalling
DecisioNet Software section for details.
Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
4-3
Installing the Base Software Package
Follow these instructions to install the Base Software Package. These
instructions assume that Windows NT or Windows 2000 is already
installed.
1. Log in as Administrator.
2. Click the Start icon at the bottom left of the screen.
3. Select Run.
4. Insert the Base Software for Windows NT/2000 CD in your CDROM drive.
5. Use the Browse button to locate the SETUP.EXE file on the CD.
Select this file and select Open.
The path and file name display in the Run dialog.
6. Select the OK button or press Enter to start the installation.
The installation displays a series of screens in the following
sequence.
•
A Welcome screen appears. Click Next to continue the
installation or Cancel to quit.
•
A License Agreement screen appears. Click Accept to continue
the installation or Decline to quit.
•
Enter the destination Install Folder. Select the default (dnet/)
or select Browse to locate the destination directory of your
choice. It is recommended to accept the default.
•
If all your information is correct, click Install on the Ready to
Install screen or Cancel to quit.
The software begins installing to the destination directory.
•
If DecisioNet was previously installed on your system, you are
prompted about replacing three configuration files
(dncbsconfig.xml, dnconfig.xml, and dnhostbridge.xml). At
each prompt, click Yes to replace the existing file or No to keep
you existing files. Keeping the existing files eliminates the need
to re-configure following installation.
4-4
Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
•
After all files are installed, the Finished screen displays
indicating a successful install. Customer-specific configuration
settings are required before rebooting the system to Chapter 6,
“Configuring the DecisioNet System Environment,” for
instructions on how to configure and start the DecisioNet
software. Click Finish or press Enter.
Installing the Scan-Merge Package
Install the Scan-Merge Package software using the following set of
instructions.
1. Click the Start icon at the bottom left of the screen.
2. Select Run.
3. Insert Scan-Merge Package CD in your CD-ROM drive.
4. Use the Browse button to locate the SPSETUP.EXE file on the CD.
Select this file and select Open.
The path and file name display in the Run dialog.
5. Select the OK button or press Enter to start the installation.
The installation displays a series of screens in the following
sequence.
•
A Welcome screen appears. Click Next to continue the
installation or Cancel to quit.
•
A License Agreement screen appears. Click Accept to continue
the installation or Decline to quit.
•
Enter the destination Install Folder. Select the default (\dnet)
or select Browse to locate the destination directory of your
choice. It is recommended to accept the default.
•
A Print Package Executable screen appears. Enter the location
and executable name of the print package program installed on
your PC. Click Next to accept the default (c:\program
files\bartender\bartend.exe), or select Browse to locate and
identify the print package on your PC.
Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
•
On the Serial Device Port Assignment screen, you may select
the default scanner port (COM1) or identify a different serial
device port where the scanner is to be connected when
downloading scan files. Click Next to continue or Cancel to
quit.
•
If all your information is correct, click Install on the Ready to
Install screen or Cancel to quit.
4-5
The software installs to the destination directory.
•
After all files are installed, the Finished screen displays, Click
Finish or press Enter.
Installing the Application Development Environment Package
Note: This is a controlled software package intended for NCR and
NCR Partner software developers who are integrating DecisioNet into
an existing price management system.
Install the Application Development Environment Package software
using the following set of instructions.
1. Click the Start icon at the bottom left of the screen.
2. Select Run.
3. Insert Application Development Environment Package for
Windows NT/2000 Package CD in your CD-ROM drive.
4. Use the Browse button to locate the ADESETUP.EXE file on the CD.
Select this file and select Open.
The path and file name display in the Run dialog.
7. Select the OK button or press Enter to start the installation.
The installation displays a series of screens in the following
sequence.
•
A Welcome screen appears. Click Next to continue the
installation or Cancel to quit.
4-6
Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
•
A License Agreement screen appears. Click Accept to continue
the installation or Decline to quit.
•
Enter the destination Install Folder. You may select the default
(dnet\) or select Browse to locate the destination directory of
your choice.
•
If all your information is correct, click Install on the Ready to
Install screen or Cancel to quit.
The software installs to the destination directory.
•
After all files are installed, the Finished screen displays, Click
Finish or press Enter.
Uninstalling DecisioNet Software
Perform the following steps to uninstall DecisioNet 3.0 Base Software
package.
1. Click on the Start icon.
2. Select Programs > DecisioNet > Stop DecisioNet Applications.
3. Stop the MySql application. At a DOS prompt enter the following:
net stop mysql
A message displays to indicate MySql is stopped.
4. Click on Start.
5. Select Programs > DecisioNet > Uninstall DecisioNet Base
Software.
Perform the following steps to uninstall the DecisioNet Scan-Merge
package.
1. Click on Start.
2. Select Programs > DecisioNet > Uninstall DecisioNet Scan
process.
Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
4-7
Configuring the DecisioNet System
After the software is installed, refer to Chapter 6, “Configuring the
DecisioNet System Environment,” for instructions on how to configure
and start the DecisioNet software.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:04:16 07:15:32
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:04:16 07:15:33-04:00
Page Count                      : 7

EXIF Metadata provided by EXIF.tools