NCR RSD Atlanta 7730GAI Electronic Pricing Transmitter User Manual Appendix B

Download:
Mirror Download [FCC.gov]
Document ID	144944
Application ID	l7zKBa6Dk7g7DYC6W0sqpw==
Document Description	Users Manual Appendix B
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	17.69kB (221185 bits)
Date Submitted	2001-04-13 00:00:00
Date Available	2001-05-29 00:00:00
Creation Date	2001-04-16 07:31:20
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-04-16 07:31:22
Document Title	Users Manual Appendix B

Appendix B:
DecisioNet Configuration Files
This appendix contains listings of the following DecisioNet
Configuration files:
•
DecisioNet CBS Configuration file (dncbsconfig.xml)
•
DecisioNet Configuration file (dnconfig.xml)
•
DecisioNet Task Manager Configuration file (taskman.cfg)
•
DecisioNet Host Bridge Configuration file (dnhostbridge.xml)
DecisioNet CBs Configuration file (dncbsconfig.xml)




1
ncrdnetnnnnnn.atlantaga.ncr.com


DecisioNet Configuration file (dnconfig.xml)





0



B-2
Appendix B: DecisioNet Configuration Files



-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
-->
-->
-->
-->
-->
-->
-->
50

-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files

10

-->
-->
-->
-->
-->
-->
-->
-->
0
dnltmanager.trc
Section: LogTally Manager
EventsMax
Specifies maximum number of records allowed
in EVENT table.
Values: 1000+
Default = 10000
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
10000

-->
-->
-->
-->
-->
-->
-->
-->
B-3
B-4
Appendix B: DecisioNet Configuration Files

1000

-->
EventsDaysToRemove
-->
-->
Specifies maximum retention days for EVENTS.
-->
All EVENTS older than this number of day will be deleted.-->
Parameter superseeds EventMAx.
-->
-->
Values: 1+
-->
-->
Default = 30
-->
30

-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files

Y

-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
-->
-->
-->
-->
-->
-->
-->
Y

-->
HandleEslTag
-->
-->
Specifies whether to handle Esl Manual Tag type actions. -->
-->
Values: Y(yes) or N(no)
-->
-->
Default = Y (yes)
-->
B-5
B-6
Appendix B: DecisioNet Configuration Files
Y

-->
-->
-->
-->
-->
-->
-->
-->
N

-->
-->
-->
-->
-->
-->
-->
-->
MANUAL

-->
-->
-->
-->
-->
-->
-->
-->
99
PAGER
-->
-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
-->
98






-->
MaxWorkerThreads
-->
-->
The maximum number of threads the CBS Manager is allowed -->
to create to communicate with CBS's. This parameter
-->
will limit the number of connections to CBS's that the
-->
CBS Manager can create.
-->
-->
Values: 1+
-->
-->
Default = 20
-->
20

-->
-->
-->
-->
-->
-->
-->
-->
-->
10

-->
B-7
B-8
Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
5

-->
MinChainedMessages
-->
-->
The minimum number of ESL commands that should be
-->
chained together in a single ESL message (downlink). If -->
fewer than this number need to be sent to process a
-->
request NOP commands are appended to increase the number -->
of chained messages.
-->
-->
Values: 1-8
-->
-->
Default = 1
-->
1

-->
-->
-->
-->
-->
-->
-->
-->
-->
60

-->
-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files

3

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
5

-->
-->
-->
-->
-->
-->
-->
-->
-->
5

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
10

-->
-->
-->
B-9
B-10 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
15

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
15

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
60

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-11
99

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
10

-->
-->
-->
-->
-->
-->
-->
-->
-->
99

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
10

-->
QuickFind
-->
-->
If enabled the CBS Manager will return the results of a -->
find immediately after recieving a response from the ESL -->
being located. If disabled the CBS Manager will
-->
B-12 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
1

-->
SimulationMode
-->
-->
If set to 1 the CBS Manager will simulate communications -->
with CBS's and ESL's. If set to 2 the CBS Manager will -->
send ESL messages to CBS's but always return a good
-->
uplink from the ESL, whether or not the actual received -->
uplink was good.
-->
-->
Values: 0, 1, or 2.
-->
-->
Default = 0
-->
1

-->
StoreID
-->
-->
The StoreID for the system. When the CBS Manager starts -->
it will ensure that all CBS's use the specified store ID -->
in beacons and all downlinks.
-->
-->
Values: 0-255
-->
-->
Default = 255
-->
255

-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-13

-->
-->
-->
-->
-->
-->
-->
0

-->
-->
-->
-->
-->








-->
PeriodicVerify
-->
-->
Whether the ESL Manager is enabled to schedule automatic -->
periodic verifies.
-->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
0

-->
-->
-->
B-14 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
P0Y0M0DT1H0M0S

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->


-->
PeriodicExistenceBedcheck
-->
-->
Whether the ESL Manager is enabled to schedule automatic -->
periodic existence bedchecks.
-->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
0
Appendix B: DecisioNet Configuration Files B-15

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
P0Y0M7DT0H0M0S

-->
ExistenceBedcheckStartDate
-->
-->
The effective start date of automatic ExistenceBedchecks -->
Note that this parameter just gives a starting
-->
point for the recurrence. It does not have to be
-->
absolute, nor does it have to be continuously updated.
-->
It simply gives A start date and time as a jumping off
-->
point for use with the associated recurrence.
-->
For example: If the action is desired every Monday at
-->
1am, then the recurrence would be P0Y0M7DT0H0M0S, and
-->
the start date could be ANY date in the past that
-->
happened to be a Monday, along with a time of 1am,
-->
say 20010205010000
-->
-->
Values: valid time stamp (YYYYMMDDhhmmss)
-->
-->
default (if missing or invalid) = time config file read -->
-->
Note: only used if PeriodicExistenceBedcheck is enabled -->


-->
PeriodicHardwareBedcheck
-->
-->
Whether the ESL Manager is enabled to schedule automatic -->
periodic hardware bedchecks.
-->
-->
Values: 0(=disabled)/1(=enabled)
-->
B-16 Appendix B: DecisioNet Configuration Files

-->
0

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
P0Y1M0DT0H0M0S

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->


-->
Appendix B: DecisioNet Configuration Files B-17

-->
Whether the ESL Manager is enabled to schedule automatic -->
periodic sumcheck bedchecks.
-->
-->
Values: valid time period specification
-->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
0

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
P0Y0M1DT0H0M0S

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
B-18 Appendix B: DecisioNet Configuration Files



-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
P0Y0M0DT2H0M0S

-->
SuccessfulSpoolRecordLifetime
-->
-->
How long after a successful spool record completes
-->
does the spool log record remain in the spool log table? -->
Note that update image requests associated with spool
-->
records being deleted are deleted from the update image -->
table
-->
-->
Values: valid time period specification
-->
-->
default = 1 minute (P0Y0M0DT0H1M0S)
-->
P0Y0M0DT0H1M0S

-->
ErroredSpoolRecordLifetime
-->
-->
How long after a spool record completes with errors
-->
does the spool log record remain in the spool log table? -->
Note that update image requests associated with spool
-->
records being deleted are deleted from the update image -->
table
-->
-->
Values: valid time period specification
-->
-->
default = 3 days (P0Y0M3DT0H0M0S)
-->
Appendix B: DecisioNet Configuration Files B-19
P0Y0M3DT0H0M0S

-->
MaxNumberUpdateRetries
-->
-->
Maximum number of times an update request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 10
-->
10

-->
MaxUpdateRetryPeriod
-->
-->
Maximum amount of time an update request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 10 minutes (P0Y0M0DT0H10M0S)
-->
PT10M

-->
-->
B-20 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
2

-->
MinUpdateRetryPeriod
-->
-->
Minimum amount of time an update request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 1 second (P0Y0M0DT0H0M1S)
-->
PT1S

-->
MaxNumberBedcheckRetries
-->
-->
Maximum number of times an Bedcheck request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
Appendix B: DecisioNet Configuration Files B-21

-->
-->
-->
-->
-->
-->
-->
10

-->
MaxBedcheckRetryPeriod
-->
-->
Maximum amount of time an Bedcheck request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 10 minutes (P0Y0M0DT0H10M0S)
-->
PT10M

-->
MinNumberBedcheckRetries
-->
-->
Minimum number of times an Bedcheck request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 2
-->
B-22 Appendix B: DecisioNet Configuration Files
2

-->
MinBedcheckRetryPeriod
-->
-->
Minimum amount of time an Bedcheck request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 1 second (P0Y0M0DT0H0M1S)
-->
PT1S

-->
MaxNumberFindRetries
-->
-->
Maximum number of times an Find request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 2
-->
2

-->
Appendix B: DecisioNet Configuration Files B-23

-->
Maximum amount of time an Find request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 5 minutes (P0Y0M0DT0H10M0S)
-->
PT5M

-->
MinNumberFindRetries
-->
-->
Minimum number of times an Find request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 0
-->
0

-->
MinFindRetryPeriod
-->
-->
Minimum amount of time an Find request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
B-24 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
PT1S

-->
MaxNumberAssignRetries
-->
-->
Maximum number of times an Assign request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 10
-->
10

-->
MaxAssignRetryPeriod
-->
-->
Maximum amount of time an Assign request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 10 minutes (P0Y0M0DT0H10M0S)
-->
Appendix B: DecisioNet Configuration Files B-25
PT10M

-->
MinNumberAssignRetries
-->
-->
Minimum number of times an Assign request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 2
-->
2

-->
MinAssignRetryPeriod
-->
-->
Minimum amount of time an Assign request is retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 1 second (P0Y0M0DT0H0M1S)
-->
PT1S
B-26 Appendix B: DecisioNet Configuration Files

-->
MaxNumberForceSearchModeRetries
-->
-->
Maximum number of times an ForceSearchMode request is
-->
retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: non negative integer
-->
-->
default = 10
-->
10

-->
MaxForceSearchModeRetryPeriod
-->
-->
Maximum number of times an ForceSearchMode request is
-->
retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 10 minutes (P0Y0M0DT0H10M0S)
-->
PT10M

-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-27

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
2

-->
MinForceSearchModeRetryPeriod
-->
-->
Maximum number of times an ForceSearchMode request is
-->
retried
-->
at the ESL Manager level when errors occur. After
-->
retries are exhausted, spool record is marked with last -->
error received. The record is always retried so that
-->
both the minimum number of retries have been done and so -->
that the minimum retry period has elapsed, but retrying -->
stops when either the maximum number of retries have
-->
have been done or the maximum retry period has elapsed, -->
whichever comes first.
-->
-->
Values: valid time period specification
-->
-->
default = 1 second (P0Y0M0DT0H0M1S)
-->
PT1S

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
B-28 Appendix B: DecisioNet Configuration Files
PT5M

-->
SumcheckCorrectiveAction
-->
-->
When a sumcheck (data) bedcheck fails, should corrective -->
action be taken automatically? If so, a FORCED update
-->
is issued for the ESL that failed.
-->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
1

-->
PingUnresponsiveTags
-->
-->
When tags fail to respond to a find command, should
-->
the tags be periodically "pinged" (i.e. another find
-->
issued) to see if the ESL comes back into communication? -->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
1
1
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-29

-->
AutoFindAfterNoResponse
-->
-->
When a tag gives no response after an update, bedcheck, -->
or verify, should there be an automatic find to try to
-->
locate these tags? It may be desirable to turn off auto -->
find in coordination with turning off the
-->
IgnoreUnresponsiveTags flag in situations with high
-->
noise.
-->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
1

-->
SearchModeAfterNotFound
-->
-->
When a tag gives no response after a find has been
-->
issued, should the ESL Manager send a command to try
-->
to place the tag in to search mode in an effort to
-->
reestablish communications (under the assumption that
-->
the tag may be able to hear the CBS but not vice versa)? -->
-->
Values: 0(=disabled)/1(=enabled)
-->
-->
default = 1 (enabled)
-->
1
1
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
B-30 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
1

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
P0Y0M1DTH0M0S

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-31

-->
-->


-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
1

-->
-->
-->
-->
-->
-->
-->
-->
-->
3
5
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
B-32 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
-->
-->
7

-->
-->
-->
-->
-->
-->
-->
-->
-->
10

-->
-->
-->
-->
-->
-->
-->
-->
-->
3

-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-33

-->
3

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
50

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
500
200
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
B-34 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
-->
-->
0

-->
-->
-->
-->
-->
-->
-->
-->
-->
10

-->
MaxAutofindSequence
-->
-->
The maximum number of "autofind" sequences to be issues -->
before stopping. An autofind sequence consists of a
-->
find followed by an assign followed by an appropriate
-->
repeat of the original transaction (update,bedchk, etc.) -->
Note that this is affected by MaxHistoryDepth, in that
-->
MaxHistoryDepth counts EVERY individual transaction and -->
could cause stopping before MaxAutofindSequence is
-->
exhausted.
-->
-->
Values: unsigned integer
-->
-->
default = 1
-->
1

-->
Appendix B: DecisioNet Configuration Files B-35

-->
The maximum number of pricecheck/corrective action tasks -->
to process before stopping. Price checks and corrective -->
actions on sumchecks are related, in that one can
-->
eventually cause the other.
-->
Note that this is affected by MaxHistoryDepth, in that
-->
MaxHistoryDepth counts EVERY individual transaction and -->
could cause stopping before this parameter is exhausted. -->
-->
Values: unsigned integer
-->
-->
default = 3
-->
3

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
128

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
128

-->
B-36 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
-->
-->
-->
-->
128

-->
MaxUpdateImageAgeBeforeRefresh
-->
-->
When update requests are posted to the spool file, an
-->
update image is also posted to the update image file and -->
represents the data obtained from the data reader.
-->
Since the update image can get out of date, this
-->
parameter gives the ability to specify how old an update -->
image may get before the ESL Manager refreshes the
-->
update image with a fresh read from the data reader. A -->
setting of all 0's forces the ESL Manager to request the -->
data from the data reader each time the update is sent. -->
-->
Values: valid time period specification
-->
-->
default = 7 days (P0Y0M7DT0H0M0S)
-->
P0Y0M7DTH0M0S
NORMAL

-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
Appendix B: DecisioNet Configuration Files B-37



-->
-->
dnConsoleTrace.trc
0

-->
-->
-->
0

-->
-->
-->
-->
1

-->
-->
-->
-->
0

-->
-->
-->
-->
1

-->
-->
-->
-->
B-38 Appendix B: DecisioNet Configuration Files

1




-->
select DATE_FORMAT(esl.LASTNORESPONSE,"%Y/%m/%d
%H:%i"), item.item_desc, HEX(esl.SERIAL_NUMBER),
location_description.location_name, esl.LINK_ID, esl.LINK_SUB_ID,
DATE_FORMAT(esl.LASTACKTIME,"%Y/%m/%d %H:%i"),
ELT(FIELD(esl.UNRESPONSIVE_FLAG,"1","0"),"UNRESPONSIVE","COMMUNICATING")
from location_description, esl, item
WHERE location_description.location_id = esl.esl_location_id
AND esl.UNRESPONSIVE_FLAG = "1"
AND item.item_id = esl.link_id
AND item.item_sub_id = esl.link_sub_id





1

-->
3

-->
-->
-->
-->
1

-->
Appendix B: DecisioNet Configuration Files B-39
HEX(spool_log.SERIAL_NUMBER), location_description.location_name,
spool_log.LINK_ID, spool_log.LINK_SUB_ID,
ELT(spool_log.record_type,"UPDATE","BEDCHECK","VERIFY","FIND","ASSIGN","SEARCH")
, HEX(spool_log.record_Status + 1)
from location_description, spool_log, item, esl
WHERE esl.serial_number = spool_log.serial_number
AND location_description.location_id = esl.esl_location_id
AND item.item_id = spool_log.link_id
AND item.item_sub_id = spool_log.link_sub_id
AND spool_log.record_status < 0

-->
-->
-->
-->
1

-->
4

-->
-->
-->
-->
1

-->
select DATE_FORMAT(esl.LASTNORESPONSE,"%Y/%m/%d
%H:%i"), item.item_desc, HEX(esl.SERIAL_NUMBER),
esl_type_description.esl_type_name, location_description.location_name,
esl.PREV_LINK_ID, esl.PREV_LINK_SUB_ID, DATE_FORMAT(esl.LASTACKTIME,"%Y/%m/%d
%H:%i"),
ELT(FIELD(esl.UNRESPONSIVE_FLAG,"1","0"),"UNRESPONSIVE","COMMUNICATING")
from location_description, esl, item, esl_type_description
WHERE location_description.location_id = esl.esl_location_id
AND esl.Link_type_id = 0
AND item.item_id = esl.prev_link_id
AND item.item_sub_id = esl.prev_link_sub_id
AND esl.serial_number > esl_type_description.esl_type_low_serial
AND esl.serial_number <
esl_type_description.esl_type_high_serial
B-40 Appendix B: DecisioNet Configuration Files

-->
-->
-->
-->
0

-->
2

-->
-->
-->
-->
0

-->
select
DATE_FORMAT(spool_log.record_complete_date,"%Y/%m/%d %H:%i"),
DATE_FORMAT(spool_log.start_date,"%Y/%m/%d %H:%i"), item.item_desc,
HEX(spool_log.SERIAL_NUMBER), location_description.location_name,
spool_log.LINK_ID, spool_log.LINK_SUB_ID,
ELT(spool_log.record_type,"UPDATE","BEDCHECK","VERIFY","FIND","ASSIGN","SEARCH")
, ELT((spool_log.record_Status + 1),"SUCCESS","IN PROGRESS","PENDING")
from location_description, spool_log, item, esl
WHERE esl.serial_number = spool_log.serial_number
AND location_description.location_id = esl.esl_location_id
AND item.item_id = spool_log.link_id
AND item.item_sub_id = spool_log.link_sub_id
AND spool_log.record_status = 0

-->
-->
-->
-->
0

-->
Appendix B: DecisioNet Configuration Files B-41
3

-->
-->
-->
-->
0

-->
select
DATE_FORMAT(spool_log.record_complete_date,"%Y/%m/%d %H:%i"),
DATE_FORMAT(spool_log.start_date,"%Y/%m/%d %H:%i"), item.item_desc,
HEX(spool_log.SERIAL_NUMBER), location_description.location_name,
spool_log.LINK_ID, spool_log.LINK_SUB_ID,
ELT(spool_log.record_type,"UPDATE","BEDCHECK","VERIFY","FIND","ASSIGN","SEARCH")
, ELT((spool_log.record_Status + 1),"SUCCESS","IN PROGRESS","PENDING")
from location_description, spool_log, item, esl
WHERE esl.serial_number = spool_log.serial_number
AND location_description.location_id = esl.esl_location_id
AND item.item_id = spool_log.link_id
AND item.item_sub_id = spool_log.link_sub_id
AND spool_log.record_status > 0

-->
-->
-->
-->
0

-->
3
0
-->
-->
-->
-->
-->
B-42 Appendix B: DecisioNet Configuration Files







2



2


DataReaderServer.log

-->
-->
-->
-->
-->






CentSign








LeadingZero


Comma

Appendix B: DecisioNet Configuration Files B-43

-->
-->
-->
-->
-->


DecisioNet Task Manager Configuration file (taskman.cfg)
# This is the configuration file for the DecisioNet 3.0 Task Manager.
# FREQUENCY
specifies the number of MINUTES between each check of the
context directories for new or updated Task files.
Default if not specified is 1 minute.
FREQUENCY=1
# KILLINTERVAL
When Task Mgr. is requested to shut down, it first sends REQUESTS
to all the apps. to close themselves. If after a while the apps
still have not closed themselves, TM kills them with an NT
"TerminateProcess()". KILLINTERVAL specifies how many seconds to wait
between asking the apps to close themselves and killing the remaining
alive apps.
Default if not specified is 15 seconds.
KILLINTERVAL=15
# DEADCHECK
specifies the number of seconds between each time TM checks to see
if any tasks have died. This is needed because currently TM uses
a polling method to determine if tasks have died. Normally, in NT
a "WaitForMultipleObjects()" would be executed on the process handles
of all the tasks, but that API can only handle a max of 64 handles. So
in order for TM to handle > 64 tasks, this method is used. The number
should be an even divisor of 60 (number of seconds in a minute), and if
it is not, TM will round it UP to the NEXT even divisor of 60.
B-44 Appendix B: DecisioNet Configuration Files
Default if not specified is 5 seconds.
DEADCHECK=3
# EXCEPTION
Specifies a default exception handler for tasks which don't have one
defined to that task in the task file. Exception handlers are programs
which are run immediately if the main task dies and exits with a
non-zero status. The exception handler will be run with the following
args passed to it (in addition to whatever args are specified in the
config file):
   
Default is to NOT have a default exception handler
# EXCEPTION=excphdlr.exe -v (for example only - no such program exists)
# CONTEXT
Specifies a new context to Task Manager. The context name must be
unique and not have any whitespace in it. It MUST be followed by
a TFILES= keyword to specify where to get the task files for this
context.
# TFILES
Specifies a path and a file mask for finding valid task files for
the preceeding context. If the path specified is not ABSOLUTE, ie.
it doesn't start with either a drive letter or a \, then the path
is relative from the DNET Data Directory (usually c:\DNET\data)
The mask specifies which files in that directory will be scanned for
task information. Each file can have information about one or more
tasks, and there can be multiple task files in the directory. Files
in the directory that do not match the mask are ignored.
CONTEXT=DNET
TFILES=dnet.tm\*.inf
CONTEXT=TASK_MANAGER
TFILES=taskman.tm\*.inf
DecisioNet Host Bridge Configuration file
(dnhostbridge.xml)


























































B-52 Appendix B: DecisioNet Configuration Files

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:04:16 07:31:20
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:04:16 07:31:22-04:00
Page Count                      : 52

EXIF Metadata provided by EXIF.tools