NEC of America KMP6J1CH Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual Manual

NEC Corporation of America Single-Band PCS GSM/ EDGE Phone with Bluetooth Manual

UserManual.wiki >

NEC of America >

KMP6J1CH User Manual >

Users Manual HTML Version

Users Manual

Emergency Services

To make an emergency call in any country

☛Press 1 1 2

Ask the operator for the service which you require: Police,

Ambulance, Fire Brigade, Coastguard or Mountain

Rescue Services. Give your position and, if possible,

remain stationary to maintain phone contact.

The 112 emergency number service is available on every

digital network service. The number 999 is an alternative

emergency number for the UK only, and can only be used

with a valid SIM card.

2Due to the nature of the cellular system, the success

of emergency calls cannot be guaranteed.

General Care

A cellphone contains delicate electronic circuitry,

magnets, and battery systems. You should treat it with

care and give particular attention to the following points.

•Do not allow the phone or its accessories to come into

contact with liquid or moisture at any time.

•Do not place anything in the folded phone.

•Do not expose your phone to extreme high or low

temperatures.

•Do not expose your phone to naked flame, cigars or

cigarettes.

•Do not paint your phone.

•Do not drop or subject your phone to rough treatment.

•Do not place the phone alongside computer disks,

credit cards, travel cards and other magnetic media.

The information contained on disks or cards may be

affected by the phone.

•Take care not to allow metal objects, such as coins or

key rings, to contact or short-circuit the terminals.

•Do not dispose of your phone in a fire. Your phone's Li-

ion batteries may be safely disposed of at Li-ion

recycling points. For more specific battery and power

supply information, see page 11.

•Do not attempt to dismantle the phone or any of its

accessories.

•This equipment is fitted with an internal battery that can

only be replaced by a qualified service engineer.

•Using any Vehicle power adapter, Dual tap, AC adapter

or accessory not specified by the manufacturer for use

with this phone creates a potential safety hazard.

•The earpiece may become warm during normal use and

the unit itself may become warm during charging.

•Your phone may become warm during charging and

normal use. Do not expose your phone to your skin for

a long time.

•Use a damp or anti-static cloth to clean the phone. Do

NOT use a dry cloth or electrostatically charged cloth.

Do not use chemical or abrasive cleaners as these

could damage the case.

•Remember to recycle: the cardboard packaging

supplied with this phone is ideal for recycling.

•Do not leave the battery empty for a long time,

otherwise some data may be initialized.

•Your phone contains metal which may cause you an

itch, a rash or eczema depending on your constitution

or physical condition.

•Take care not to put your phone in the back pocket of

your trousers or skirt and then sit on it. Also, do not put

your phone at the bottom of bag where it may subject to

excessive weight or pressure.

Doing so may damage the display and camera lens and

cause them malfunction.

•The foam covers the earpiece of the headset. Do not

put any other part of the headset in your ears.

Aircraft Safety

•Switch off your phone when inside or near aircraft. The

use of cellphones in aircraft is illegal. It may be

dangerous to the operation of the aircraft and it may

disrupt the cellular network. Failure to observe this

instruction may lead to suspension or denial of the

cellphone service to the offender, or legal action, or

both.

•Do not use your phone on the ground without the

permission of the ground crew.

Hospital Safety

•Switch off your phone in areas where the use of

cellphones is prohibited. Follow the instructions given

by the respective medical facility regarding the use of

cellphones on their premises.

General Safety

•Observe ‘Turn off 2-way radio’ signs, such as those

near stores of fuel, chemicals or explosives.

•Do not allow children to play with the phone or its

accessories.

•Small parts are included in your phone. Keep them out

of reach of small children, for whom it could be a

choking hazard.

•The operation of some medical electronic devices, such

as hearing aids and pacemakers, may be affected if a

cellphone is used next to them. Observe any warning

signs and manufacturer's recommendations.

•Keep your phone away from precision instruments. It

may cause noise or malfunction of the instruments.

•If you have a weak heart, you should take extra

precautions when setting functions such as the Vibrator

and Ringer volume functions for incoming calls.

•If you set the Vibrator setting to anything other than

OFF, be careful that the phone is not near a source of

heat (e.g. a heater) and that it does not fall from a desk

due to the vibration.

ii General Care

•To avoid risk of burns do not allow the product

temperature to exceed 55°C; e.g. do not leave the

phone on a car dashboard or on a window sill, behind

glass in direct sunlight, etc.

•Do not put the phone and its adapters (including the

charger) in a heating/cooking device such as a

microwave oven, or a pressure cooker. Doing so will

cause the phone and adapters to heat up, smoke, burst

or ignite.

Road Safety

•You MUST exercise proper control of your vehicle at all

times. Give full attention to driving.

•Observe all the recommendations contained in your

local traffic safety documentation.

•Pull off the road and park before making or answering a

call if driving conditions so require.

•You MUST NOT stop on the hard shoulder of a

motorway to answer or make a call, except in an

emergency.

•Switch off your phone at a refuelling point, such as a

petrol station, even if you are not refuelling your own

car.

•Do not store or carry flammable or explosive materials

in the same compartment where a radio transmitter,

such as a cellphone, is placed.

•Electronic vehicle systems, such as anti-lock brakes,

speed control and fuel injection systems are not

normally affected by radio transmissions. The

manufacturer of such equipment can advise if it is

adequately shielded from radio transmissions. If you

suspect vehicle problems caused by radio

transmissions, consult your dealer and do not switch on

your phone until it has been checked by qualified

approved installers.

Vehicles Equipped with an Air Bag

An air bag inflates with great force. Do not place objects,

including either installed or portable wireless equipment,

in the area over the air bag or in the air bag deployment

area. If in-vehicle wireless equipment is improperly

installed and the air bag inflates, serious injury could

result.

Third Party Equipment

The use of third party equipment, cables or accessories,

not made or authorized by NEC, may invalidate the

warranty of your cellphone and also adversely affect the

phone’s operation. For example use only the NEC mains

cable supplied with the AC charger.

Service

The cellphone, batteries and charger contain no user-

serviceable parts. We recommend that your NEC

cellphone is serviced or repaired by an NEC authorized

service centre. Please contact your Service Provider or

NEC for advice.

Non-Ionizing Radiations

The radio equipment shall be connected to the antenna

via a non-radiating cable (e.g. coax).

The antenna shall be mounted in a position such that no

part of the human body will normally rest close to any part

of the antenna unless there is an intervening metallic

screen, for example, the metallic roof.

Use only an antenna that has been specifically designed

for your phone. Use of unauthorized antennas,

modifications or attachments could damage your phone

and may violate the appropriate regulations, causing loss

of performance and radio frequency (RF) energy above

the recommended limits.

Efficient Use

For optimum performance with minimum power

consumption, note the following:

•Your phone has the internal antenna. Do not cover part

of the internal antenna of the phone with your hands.

This affects call quality, may cause the phone to

operate at a higher power level than needed and may

shorten talk and standby times.

Radio Frequency Energy

Your phone is a low-power radio transmitter and receiver.

When it is turned on, it intermittently receives and

transmits radio frequency (RF) energy (radio waves). The

system that handles the call controls the power level at

which the phone transmits.

Exposure to Radio Frequency Energy

Your phone is designed not to exceed the limits for

exposure to RF energy set by national authorities and

international health agencies. * These limits are part of

comprehensive guidelines and establish permitted levels

of radio wave exposure for the general population. The

guidelines were developed by independent scientific

organizations such as ICNIRP (International Commission

on Non-Ionizing Radiation Protection) through periodic

and thorough evaluation of scientific studies. The limits

include a substantial safety margin designed to assure

the safety of all persons, regardless of age and health,

and to account for any variations in measurements.

*Examples of radio frequency exposure guidelines and

standards that your phone is designed to conform to:

•ICNIRP, “Guidelines for limiting exposure to time-

varying electric, magnetic, and electromagnetic fields

(up to 300 G Hz)-International Commission on Non-

Ionizing Radiation Protection (ICNIRP)”.

Health Physics, vol. 74. pp, 494-522, April 1998.

•99/519/EC Council Recommendation on the limitation

of exposure to the general public to electromagnetic

fields 0 Hz-300 GHz, Official Journal of the European

Communities, July 12,1999.

•ANSI/IEEE C95.1-1992. “Safety levels with respect to

human exposure to radio frequency electromagnetic

fields, 3kHz to 300 GHz”. The Institute of Electrical and

Electronics Engineers Inc., New York, 1991.

iii

General Care

•FCC Report and Order, ET Docket 93-62, FCC 96-326,

Federal Communications Commission (FCC), August

1996.

•Radio communications (Electromagnetic Radiation

Human Exposure) Standard 2003, Australian

Communications Media Authority.

Declaration of Conformity

•This product complies with the requirements of the

R&TTE Directive 1999/5/EC. The ‘Declaration of

Conformity’ leaflet can be found within this box.

Disposing of your used NEC product

•In the European Union

EU-wide legislation as implemented in

each Member State requires that used

electrical and electronic products carrying

the mark (left) must be disposed of

separately from normal household waste.

This includes mobile telephones or electrical

accessories, such as chargers or headsets. When

you dispose of such products, please follow the

guidance of your local authority and/or ask the shop

where you purchased the product. The mark on the

electrical and electronic products only applies to the

current European Union Member States.

•Outside the European Union

If you wish to dispose of used electrical and

electronic products outside the European Union,

please contact your local authority and ask for the

correct method of disposal.

Licenses

•T9® Text Input and the T9 logo are registered

trademarks of Tegic Communication.

“T9 Text Input is licensed under one or more of the

following:

U.S. Pat. Nos. 5,187,480, 5,818,437, 5,945,928,

5,953,541, 6,011,554, 6,286,064, 6,307,548,

6,307,549, and 6,636,162, 6,646,573; Australian Pat.

Nos. 727539, 746674, and 747901; Canadian Pat.

Nos. 1,331,057, 2,302,595, and 2,227,904; Japan

Pat. No. 3532780, 3492981; United Kingdom Pat.

No. 2238414B; Hong Kong Standard Pat. No.

HK1010924; Republic of Singapore Pat. No. 51383,

66959, and 71979; European. Pat. Nos. 0 842 463

(96927260.8), 1 010 057 (98903671.0), 1 018 069

(98950708.2); Republic of Korea Pat. Nos.

KR201211B1 and KR226206B1. People’s Republic

of China Pat. Application Nos. 98802801.8,

98809472.X and 96196739.0; Mexico Pat. No.

208141; Russian Federation Pat. No. 2206118; and

additional patents are pending worldwide”

•USE OF THIS PRODUCT IN ANY MANNER THAT

COMPLIES WITH THE MPEG-4 VISUAL STANDARD

IS PROHIBITED, EXCEPT FOR USE DIRECTLY

RELATED TO (A) DATA OR INFORMATION

ENCODED BY A CONSUMER FOR PERSONAL AND

NON-COMMERCIAL USE WITHOUT

REMUNERATION; (B) DATA OR INFORMATION (i)

GENERATED BY AND OBTAINED WITHOUT

CHARGE FROM A CONSUMER NOT THEREBY

ENGAGED IN A BUSINESS ENTERPRISE, AND (ii)

FOR PERSONAL USE ONLY; AND (C) OTHER USES

SPECIFICALLY AND SEPARATELY LICENSED BY

MPEG LA, L.L.C.

•Helvetica is a registered Trademark of Heidelberger

Druckmaschinen AG which may be registered in certain

jurisdictions.

airport.com/

•Java and all Java-based trademarks and logos are

trademarks or registered trademarks of Sun

Microsystems, Inc in the U.S. and other countries.

•This product contains ACCESS Co., LTD’s Compact

NetFront™ Plus internet browser software.

Compact NetFront™ is a registered trademark or

trademark of ACCESS CO., LTD in Japan and

selected countries worldwide.

•This product contains ACCESS CO., LTD’s JV-Lite2™

Java virtual machine software.

JV-Lite2™ is a registered trade mark or trademark of

ACCESS COl, LTD, in Japan and selected countries

world wide.

•Proprietary notice contains Macromedia Flash™ Player

Macromedia, Flash and Macromedia Flash are

trademarks or registered trademarks of Macromedia,

Inc. in the United States and other countries.

This product features the Macromedia Flash™

Player technology. For further information on the

Macromedia Flash Player, visit http://

www.macromedia.com/software/flash/about/.

•This Mobile Printing Ready product is designed to

provide easy printing from mobile phones. This product

follows Mobile Imaging and Printing Consortium (MIPC)

guidelines version 1.0 for PictBridge.

•The Bluetooth® word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by NEC

is under license. Other trademarks and trade names are

those of their respective owners.

•i-mode and i-mode logos are trademarks or registered

trademarks of NTT DoCoMo.

For the purpose of improvement, the specifications

for this product and its accessories are subject to

complete or partial change without prior notice.

Emergency Services i

General Care i

Before You Start 1

User’s manual conventions .........1

Accessories and options .............2

Parts and functions......................3

Keypad shortcuts.........................4

Displays and icons ......................5

Overview of menu function..........8

Getting Started 9

Preparing the phone....................9

Standby and talk times..............12

Low battery alarm......................12

Other battery alarms..................12

Start-up......................................12

Basic Calls & Phone Use 13

Making basic calls .....................13

Unsuccessful calls.....................14

Emergency calls........................14

Last number redial.....................14

One-touch dial...........................14

Fast dialling ...............................14

Displaying your own phone number

(M0/M416).................................14

Voice recall................................15

During a call ..............................15

Using Speaker phone function ..16

Putting a call on hold.................16

Mute ..........................................16

Call transfer ..............................16

Multi-party calls .............. 16

Recording a call........................17

Scratchpad number ..................17

Call options (M43)..................... 17

Call settings (M16)....................18

International dialling codes .......20

Roaming ................................... 20

Text Entry 21

Mode change............................21

T9® English text input ...............21

Normal text input....................... 22

Numeric input............................ 22

Desktop icons 23

Settings (M1) 24

Phone (M11) ............................. 24

Phone modes (M12) ................. 25

Main-display (M13) ...................26

External-display (M14)..............27

Power saving (M15)..................27

Calls (M16) ...............................27

Security (M17) ..........................27

Network (M18) ..........................29

Reset settings (M19)................. 29

Message (M2) 30

Message overview.................... 30

Reading a message (M21) .......30

Creating a message.................. 34

Cell broadcast (M27) ...............35

i-mode (M3) 36

i-mode operation guide.............36

i-mode screen ........................... 41

i-mode menu screen.................41

iMenu screen ............................44

Mail screen ...............................45

Phonebook (M4) 49

Phonebook types ...................... 49

Accessing your phonebook (M4)50

Phonebook list Options menu...52

Personal data Options menu ....53

Voice mail (M417) ....................54

Camera (M5) 55

Notes on using the camera.......55

Taking a picture/recording a video

(M51/M52) ................................56

My data (M6) 59

Videos (M61) ............................59

Sounds (M62) ...........................59

Pictures (M63) ..........................60

MP3 (M64)................................62

File selector Options menu .......62

Java™ (M7) 64

Programs (M71)........................64

Prog backlight (M72)................. 65

Accessory (M8) 66

Music player (M81) ................... 66

Calculator (M82) .......................66

Clock alarm (M83) ....................67

Scheduler (M84)....................... 68

ToDo list (M85)......................... 69

Notepad (M86) ......................... 70

Voice memo (M87)................... 71

Currency (M88) ........................ 72

Bluetooth (M89)........................ 72

Synchronization (M80) ............. 72

Bluetooth (M89) 73

Pairing Bluetooth device........... 74

Connecting Bluetooth device.... 74

Using Bluetooth device............. 75

Bluetooth Object Push.............. 76

Bluetooth File Transfer............. 77

Index 78

N500iS Quick Manual 81

vi Memo

Memo

Before You Start

User’s manual conventions

The following markers are used throughout the user’s manual to attract your attention:

2This type of paragraph will contain information worth noting and reference pages.

,This type of paragraph will contain important information.

☛This type of description will contain procedures to operate your phone.

Menu shortcuts selection

The alternative shortcuts method of selection lets you jump straight to a menu or function

without highlighting an icon and scrolling through the intermediate menu options. The selection

is made by pressing numbers which relate to the displayed menu options. The instructions in

this user's manual uses shortcuts selection, except in special cases.

Reading the titles

Some titles in this manual contain information on how to access the functions. In these titles,

M stands for , the numbers indicate the menu shortcut numbers (p.5 “Displays and icons”

) and ... (three periods) indicate that there are more operations described in the paragraph.

Reading the procedures

“Highlight” means to use the 4-way navigation keys (▲▼ ) to move the area

emphasized with different colouring.

“Select” means to highlight an item and then press .

Procedures are written omitting the verb “press”, except in some special cases.

For example, 1 2 means to:

☛Start from the standby screen ➔ Press to display the Main menu screen.

☛Press 1 to display the Settings screen ➔ Press 2 to display the Phone modes screen.

Simple procedures are connected by arrows (➔).

Descriptive labels

SIM card dependent and may not be available with your SIM card.

Network dependent and may not be available with your service provider.

SIM

2Before You Start

Check box/Radio button

A check box enables/disables an option from a set of options, and multiple check boxes can

be selected at the same time. On the other hand, selecting a radio button automatically cancels

the previous selection, so only one radio button can be selected at one time.

A check box/radio button option can be selected/cancelled by highlighting it and pressing .

Options menu

Depending on the conditions, some options may be displayed in gray and not be available.

Accessories and options

Accessories may be included when you purchase your phone. There are also optional items

that you can purchase.

The following items may be available as accessories or options, depending on the specification

at the purchase:

•Simple Handsfree (called “headset” or “wired headset” in this manual)

•Vehicle Power Adaptor

•USB cable

•Dual tap

2There may be unavailable items depending on your operator and location.

Before You Start

Parts and functions

,Be careful not to put your finger or foreign objects in the internal antenna part when

your phone is opened.

,Do not put any accessories (straps, etc.) on the internal antenna part.

,The Liquid Crystal Display (LCD) of your phone’s main-display is manufactured

using high-precision technology. Even so, the LCD may contain pixels (dots) that

fail to light or that remain permanently lit. Note that this is normal and does not

indicate a problem with your display.

,The battery is not removable. You cannot remove it from the phone.

Main-display

Softkey 1 (SK1)

MENU ( ) key

Send ( ) key

CLR

Clear ( ) /

Back key

Charger connector/

Earphone jack

Speaker

Camera

LED

External-display

Side up key

Side down key

Internal antenna

part

SIM card

compartment cover

Through-hole

for straps

Mouthpiece

Alphanumeric

keys

End/on-off

( ) key

Softkey 2 (SK2)

Phonebook

( ) key

Earpiece

4 way navigation

( ) key

Select ( ) key

4Before You Start

Keypad shortcuts

The following operations are available from the standby screen.

Key Press PPress and hold P

Main menu screen 8 Sets/Cancels the Side key lock 24

SK1 Mail screen 45 Inbox screen 45

SK2 i-mode menu screen 41 Java™ applications screen 64

Phonebook list screen 49 Message screen 30

▲Phone modes screen 25 Sets the phone to Meeting mode/

Returns to the previous mode 25

▼My data screen 59 Voice recall 15

New SMS message edit screen 34 – –

Received calls list 18 – –

Dialled calls list 18 – –

Highlights a desktop icon 23 Accesses the homepage 42

Ends a call or returns to the

standby screen – Power-off 12

CLR

Cancels Cell Broadcasts 35 Deletes all the automatically dis-

played desktop icons 23

Deletes character when you

enter text or returns to the pre-

vious screen –Deletes all characters when you

enter text –

1Enters phone numbers 13 Calls the Voice mail centre 54

2 to 9Enters phone numbers 13 One-touch dial to phonebook(SIM) 14

0Enters phone numbers 13 Enters + 20

#Enters #13 Enters a pause –

Enters 13 Switches the ALS line 1/2 24

Side up

Volume control screen when

your phone is open 24 Camera view finder screen 55

Ring silencer function when

you receive a call 24

Side down

Volume control screen when

your phone is open 24 ––

Ring silencer function when

you receive a call 24

Before You Start

Displays and icons

Desktop icon area

This area contains the automatically

displayed (A) and the manually created

desktop icons. They provide shortcuts to

certain items/functions.

Help area

This area contains clock information and help

information appropriate for the current screen

(e.g. key presses remaining when composing

a message).

SK1/SK2

This area contains context sensitive

descriptions of the Softkeys’ functions

appropriate for the current screen.

Status bar area

This area contains icons which indicate the

battery strength, new SMS/MMS message(s),

signal strength, etc.

Full / partial / low / empty battery

Battery charging status (fast, slow, pause)

New SMS in your phone

New SMS on the network

SIM memory is full.

Inbox in your phone is full.

(pink) New mail and MMS on the

server

51 2 3 4 6 7 8 9

1 2 3 4

12 10

ea b c d

5 6 7 8

Missed call (A)

Missed message (A)

Missed Mail (A) Phone number

Message URL

Picture Note

Camera Video

Music player Calculator

Clock alarm Scheduler

ToDo list Notepad

Voice memo

recorder Currency

Bluetooth Voice/

Modem Bluetooth Data

exchange

6Before You Start

(yellow) New mail/MMS in your phone

2This yellow icon blinks while a mail/MMS is

being downloaded.

Memory for mail/MMS is full.

(red, green/red, green)

New voice mail messages on the network (No

ALS or ALS Line 1/ALS Line 1 and 2/ALS

Line 2).

Secured communication on WTLS in

i-mode

Phone is connected to a GPRS/EDGE

modem.

(gray) Phone is in the GSM network

service area and GPRS/

EDGE is active.

(yellow) GPRS/EDGE is available and

i-mode (PDP Context) is

active.

i-mode connection is carried

out.

i-mode lock is on.

2No icon appears when the phone is outside

the GSM network service area, or when the

phone is in the GSM network service area

and GPRS/EDGE is not attached.

Bluetooth On

Bluetooth is active

Line status (No ALS or ALS Line 1)

Line status (ALS Line 2)

2 displayed in red indicates that the ALS

line 1 or 2 is unencrypted/no ALS.

Signal strength level

Outside the service area

Auto start of a Java™ application

failed.

Alarm-on

Sound-off

Vibrator-on

Sound-off/vibrator-on

2“Sound-off” or “sound-off/vibrator-on” icon

appears only when all the volume settings

(Ringer, SMS and Mail) of the current phone

mode are set to 0 (Quiet).

Meeting mode

Pocket mode

2No icon appears for the Normal mode.

Call diversion set

Menu title

Shortcut number

Press the appropriate number to jump straight

to a next menu.

The row colour is changed when selected

(e.g. to activate/deactivate a facility).

Shortcut menu number

The current menu number is displayed.

Page scroll bar

Displayed when you can press ▼ to scroll to

the next page.

Next menu icon

Displayed when you can press or the

shortcut number to show the next menu.

MENU/Phonebook/Navigation indicators

Displayed when you can press , , or

navigation keys.

Options menu by pressing

Phonebook list by pressing

Usable keys in black, while using i-mode or a

Java™ application is in operation

Help display is available by pressing

when using SIM toolkit.

Java™ application is in operation.

Network name

(Network name is Displayed in orange when

using roaming service.)

External-display status bar area

Battery level

Battery charging status (fast, slow, pause)

New SMS in your phone

New SMS on the network

SIM memory is full.

Before You Start

Inbox in your phone is full.

New mail and MMS on the server

New mail/MMS in your phone.

2This icon blinks while a mail/MMS is being

downloaded.

Memory for mail/MMS is full.

New voice mail message is on the network

(No ALS or ALS Line 1/ALS Line 1 and 2/

ALS Line 2).

Bluetooth On, Bluetooth is in

operation

Meeting mode, Pocket mode

2No icon appears for the Normal mode.

Signal strength level.

Outside the service area

View finder and Video/Music player

Single/burst mode (camera)

Video mode, video is recording.

Self timer

Picture quality (camera)

Video quality

Screen size

Shooting environment

Brightness setting

Zoom

Indicates the video is playing, on pause,

stopped, fast forwarding, or rewinding.

Indicates the video is being downloaded

and replayed (progressive download).

2The progressive download icon blinks while

buffering, pausing, or stopping the download.

Normal/enlarged screen size (These icons

are common in the streaming video player.)

Current volume level. The 0 is mute and 9 is

the maximum (These icons are common in the

streaming video player and the music player).

Indicates the video is playing, on

pause, stopped.

Indicates video-on-demand or live

broadcasting.

(red, yellow, green)

Indicates the amount of buffered data.

(The colour of icon changes in order from

red to yellow to green as buffering

progresses.)

Equalizer: Rock, Jazz, Pop

Repeat all, Repeat one

<External-display Music player icons>

Music player is playing, paused,

stopped.

Repeat all, Repeat one

8Before You Start

Overview of menu function

The Main menu has a set of icons for its top levels of options which can be selected either

using a combination of the 4-way navigation key (▲ ▼ ) and (menu selection),

or just the keypad (shortcuts selection).

2The title of the selected option will be displayed in the Help area.

2SIM toolkit icon is displayed only when your SIM card supports this function.

2If you do not press any key for three minutes while using the phone, the screen may return to the

standby screen.

➡➡

➡

Standby screen Main menu screen

CLR

Key Main menu Second level menu Page

1 Settings Phone 24

Phone modes 25

Main-display 26

External-display 27

Power saving 27

Calls 27

Security 27

Network 29

Reset settings 29

2 Message Inbox 30

Drafts 30

Outbox 30

Sent 30

Folder1 30

Folder2 30

CB 30

3 i-mode i-mode 36

Settings 41

4 Phonebook Lists 51

Information # 51

Call options 52

Key Main menu Second level menu Page

5 Camera Camera 56

Video recorder 56

6 My data Videos 59

Sounds 59

Pictures 60

MP3 62

7Java™Programs 64

Prog backlight 65

8 Accessory Music player 66

Calculator 66

Clock alarm 67

Scheduler 68

ToDo list 69

Notepad 70

Voice memo 71

Currency 72

Bluetooth 72

Synchronization 72

9 SIM toolkit -

0 Own number display 14

Getting Started

Preparing the phone

Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card

is inserted and the battery is charged.

SIM card

Before using your phone, you must sign-up with one of the digital network service providers.

In addition to your subscription details you will receive a personal SIM (Subscriber Identity

Module) card which is inserted into your phone.

If the SIM card is removed, the phone becomes unusable until a valid SIM card is fitted. It is

possible to transfer your SIM card to another compatible phone and resume your network

subscription. The screen on your phone will display appropriate messages if no SIM card is

fitted.

,If the phone, or the SIM card, is lost or stolen then you should contact your service

provider immediately in order to bar it from use.

2The digital technology of your phone helps to ensure that your conversations are kept secure.

2The SIM card contains personal data such as your electronic phonebook, messages (p.30 “Message

(M2)”) and also details of the network services you have subscribed to. The phone will not work (except

for emergency calls on some networks) unless a valid SIM card is fitted.

Inserting/Removing a SIM card

,Be sure to turn the phone off before inserting and removing a SIM card. Otherwise

damage to the SIM card can occur.

,Be careful not to damage electric parts of the SIM card compartment when inserting/

removing a SIM card.

,Be careful not to pull out the cover too much. This may cause the SIM card

compartment cover to break apart.

,Make sure to handle the black rubber part that connects the phone and the SIM card

compartment cover gently.

,Make sure to insert the SIM card until it is locked in place in STEP 3. Otherwise,

damage to the SIM card can occur.

10 Getting Started

Inserting

☛Pick up the bump and lift the SIM card

compartment cover gently in the direction of the

arrow (STEP 1).

☛Insert the SIM card into the narrow slot in the SIM

card compartment in the direction of the arrow

(STEP 2) until it is locked in place (STEP 3). Make

sure the metal part of the SIM card is facing front

when viewed from the keypad (see the figure on

the right).

☛Slide the cover in the direction of the arrows (STEP 4) until the two tabs fit properly

inside the cover (STEP 5).

☛Close the cover in the direction of the arrows until the four tabs are locked in the cavities

and click (STEP 5 and STEP 6).

Removing

☛When removing a SIM card, slide the SIM card with

your finger for a few millimeters and pull the SIM

card out of the slot gently in the direction of the

arrow (see the figure on the right).

SIM card

Getting Started

Charging the battery

,Make sure to insert the charger plug with the arrow label facing up. Otherwise,

damage to the charger connector can occur.

,Be sure to hold the phone and not the battery charger cable when you have to lift

the phone with the battery charger connected. Lifting the phone by holding the

battery charger cable may disconnect the charger connector and cause damage to

the charger connector or the phone.

,Using any AC adapter, vehicle power adapter or dual tap not specified by NEC for

use with this phone can be dangerous and may invalidate any warranty and

approval given to the cellphone. Do not leave the charger connected to the mains

supply when it is not in use.

,Do not try to charge the battery if the ambient temperature is below 5°C (41°F) or

above 35°C (95°F).

,Charging a very low battery

The battery’s charge continues to drop after the low battery warning is displayed. In

extreme cases where the battery is left uncharged for some considerable time after

this warning, a trickle charge is used to slowly top-up the battery to the safe level at

which the fast charging can begin. The phone can be in trickle charge for up to 10

minutes before the fast charging starts.

The phone cannot be turned on during trickle charge (while LED lights in orange).

☛Connect the NEC battery charger (AC adapter) supplied with your phone to a suitable

mains power socket.

☛With the arrow label of the charger plug facing up, slowly insert the charger plug straight

into the charger connector.

☛After the charging is complete, gently pull straight out of the charger connector.

2LED will turn on in orange while trickle charging and red while fast charging. When charging is complete,

the LED will turn off.

2If your phone is turned on and the fast charging starts, the battery charging icon will be displayed (p.5

for icons).

2You are recommended to switch off the phone while charging. If you need to receive calls, your phone

can be switched on and left in standby while being charged, although the total time taken to charge is

then increased.

2If you use the phone while charging, handle the phone carefully since the cable or adapter is connected.

Insert straight

with arrow label

facing up

12 Getting Started

2If you make/receive a call while charging, the charging may temporarily be interrupted.

2Charging takes approximately 3 hours with your phone turned off.

2Even if the phone remains connected to the charger, battery residual capacity may decrease when the

phone is used for video recording, playing or other battery consuming operation.

Standby and talk times

The standby and talk times achieved by your phone varies depending on how you use the

phone and choices made by the network operator. Factors such as your location within the

network, the location update frequency, the SIM card type, the reception of cell broadcast and

the use of full rate or enhanced full rate speech, will affect both standby and talk times.

Low battery alarm

When the battery voltage falls below the working level, a low battery warning is displayed on

the screen accompanied by LED illumination and a short tone along with an empty battery

icon. The phone will automatically power down shortly afterwards.

2Please charge the battery as much as possible when the battery is very low.

Other battery alarms

Your phone may display warnings when the battery temperature is too high, or the voltage of

the battery or the charger is over the appropriate level. Follow the instruction given by these

warnings immediately.

Start-up

Switching the phone on

☛Hold down for about a second to switch on.

,You may need to charge the battery before using your phone.

2When your phone is turned on, a fixed ringer may sound at the Ringer volume setting of the current

phone mode (p.26).

2If your phone is accidentally turned off while downloading or deleting a Java™ application, it will take

longer than usual to start up the phone the next time you turn on the power.

Switching the phone off

☛Hold down until the display shows the switch off message.

PIN code

The SIM card issued by your service provider has a security feature called PIN code

protection. The Personal Identification Number (PIN) is a number put on to the card by your

service provider, and is 4 to 8 digits long. If you insert a SIM card other than your own,

information such as call logs may be lost (p.27 “Security (M17)”).

Basic Calls & Phone Use

Making basic calls

2Use the full STD area code even if you are calling to a person in the same town. If the numbers are too

long to be displayed within one line, after pressing , excess part is deleted and ‘...’ is added at its end.

2The main-display shows the icon of strength of the radio signal that links your phone to the network

(p.6).

2When connecting a wired headset and Bluetooth headset at the same time, the wired headset will work

partially (only its button will work).

2See p.19 “Call diversion (M161)”, p.19 “Call waiting (M162)” and p.17 “Call options (M43)”

Starting a call

☛Key in the phone number. Check the number on the display ➔ or SK1 to send the

input number to start the call.

☛Before the other party answers the call, you can end the call by pressing briefly,

pressing SK2 or closing your phone. When you use the headset, you can also end the

call by pressing and holding the button on it.

Ending a call

☛While talking, SK2 or briefly, or close your phone.

2If is held down, your phone will turn off.

2When you use the headset, you can also end a call by pressing and holding the button on it.

2You cannot end a call by closing your phone when the headset is connected.

Receiving an incoming call

When someone calls your number, the ringer will play (p.25), the LED glows in the specified

colour, and the phone number of the caller may be displayed if the calling line identification

facility is available and the caller has activated the feature. If the caller’s phone number has

been related and stored in your phonebook with a name and a CLI picture (p.51), that name

and picture will be displayed. If the caller has withheld their identity, the screen will give a

message that the caller’s number is being withheld. If the origin of the call cannot be

determined, no information is displayed on the screen.

2You also have options for holding and forwarding calls. These options depend on your network and your

subscription arrangements.

Accepting an incoming call

☛While receiving an incoming call, or SK1. (When you use the headset, you can also

accept an incoming call by pressing the button on it.)

Rejecting an incoming call

☛While receiving an incoming call, or SK2 briefly or close your phone.

When you use the headset, you can also reject an incoming call by pressing and holding the button on it.

2You cannot reject a call by closing your phone when the headset is connected.

14 Basic Calls & Phone Use

If your phone receives a call and you do not answer it, the main-display will display a desktop

icon of the phone number (or the name if stored) of the caller (if available). If your phone is

closed, the external-display will display a missed call message. This information is stored in

the missed calls list. Up to 20 missed calls are stored in this list.

2If you are making a call, the phone gives priority to receiving a call unless you have already pressed .

Unsuccessful calls

If dialled call is not successfully connected, the display will give an appropriate message.

If your phone has the auto redial function activated, the number will be automatically called

again after a short delay (p.19).

Emergency calls

The standard emergency number of 112 can be used.

☛Key in 1 1 2 ➔ or SK1 to connect the call to the local emergency services.

2On some networks, emergency calls can be made using the 112 number without a SIM card inserted.

Last number redial

You can redial the last number you called (p.17 “Call options (M43)”).

☛Ensure that the standby screen is displayed and no phone number is shown ➔ twice

to dial the last number you called.

One-touch dial

One-touch dial for the phonebook (SIM) is available by pressing and holding the number keys

between 2 and 9. The number corresponds to the location number in the phonebook (SIM).

Fast dialling

You can make a call to the phone number in the phonebook (Phone/SIM) with just a few

presses of the buttons. To fast-dial the phone number in the phonebook (Phone/SIM), use the

following procedure:

☛From the standby screen, key in the Location number of a personal data in the

phonebook (Phone/SIM) ➔ for Phone or # for SIM ➔ The corresponding personal

data is displayed.

☛Use the and keys to choose the phone number for Phone (if there are more

than one) ➔ to dial the phone number.

Displaying your own phone number (M0/M416)

☛ 0 or 4 1 6.

Basic Calls & Phone Use

Voice recall

You can store up to 10 voice recall recordings which can be allocated to a personal data stored

in the phonebook (Phone). To store the voice recall sound, p.51 “Voice recall functions”. To

use the voice recall function, use the following procedure:

☛Press and hold ▼. When you use the headset, you can also activate the voice recall

function by pressing and holding the button on it from the standby screen.

☛Within 4 seconds, say the word or words you have recorded to identify the record you

wish to recall. If the word or words were recognized, the first phone number of the

personal data stored in the phonebook (Phone) will be called automatically.

During a call

Options menu

☛During a call, to display the options menu.

Options menu (during a call)

1 Main menu Displays the Main menu screen (p.8 “Overview of menu func-

tion”).

2 Speaker Phone On/

Speaker Phone Off Activates or deactivates the speaker phone function (This func-

tion is turned off while wired/Bluetooth headset is connected).

2You can also toggle the speaker phone function on/off by pressing

and holding during a call.

3 Hold/Retrieve Puts the call(s) on hold or retrieves the call(s).

4Mute/Unmute Mutes or unmutes your voice to all active calls.

5 Switch call to phone/

Switch call to

Bluetooth

Switches the audio path state of the call. (Available only when

the Bluetooth device is connected to the phone.)

2You can also switch call to phone or Bluetooth by pressing and

holding #.

2This setting is valid only for the current phone call.

6 Bluetooth On Activates the Bluetooth device.

7 Transfer call Enables to transfer the call and connect other parties. After

transferring the call, your call will be dropped.

8 Add to conference Merges calls and makes a multi-party call.

9 Private call Makes a private call to the highlighted party within the multi-

party call.

0 Record call Records the call while talking.

Disconnect party Disconnects the highlighted party.

16 Basic Calls & Phone Use

Icons displayed on the main-display during a call

Using Speaker phone function

You can speak with your hands free using the speaker phone function.

☛To use the speaker phone function, press and hold or 2 during a call.

☛To cancel, press and hold or 2 again.

Putting a call on hold

☛To put the received or dialled call on hold, SK1 or 3. To retrieve the call, SK1 or

3 again.

Mute

You can mute the sound from the mouthpiece during a call (Not available while using the

headset). When your call is muted, the other party cannot hear any sound from your phone,

but you can still hear the sound from the other party. The mute function is automatically

released after the call ends.

☛To mute the sound during a call, 4. To retrieve the sound, 4 again.

Call transfer

When you have an active call and a held call, you can transfer the call and connect the two parties,

then you can drop from the line while leaving those two calls active. After dropping from the call with

the other two parties, if you have a call waiting, you can proceed the call with it.

☛To transfer the call, 7.

Multi-party calls

If your SIM card is multi-party enabled, you can make a conference call to more than one caller.

To create the multi-party calls, at least 3 parties, including the host, are needed.

Receiving the second call

☛SK1 or to accept the second call (The first call will be put on hold) ➔ SK2 or

8 to merge both calls to initiate a multi-party call.

Making the second call

☛SK1 to put the first call on hold ➔ Key in the phone number ➔ SK1 or to make the

second call ➔ After the second participant answers, SK2 or 8 to merge both calls

to initiate a multi-party call.

Charge information Speaker phone

Calling time Bluetooth headset activated

Mute Multi-party call

SIM

Basic Calls & Phone Use

Putting the multi-party calls on hold

☛SK1 or 3 to put all calls on hold (only when you are a host of the multi-party calls)

➔ To retrieve the call, SK1 or 3 again.

Making a private call

While on the multi-party call, you can make a private call to a specific party (only when you are

a host of the multi-party calls).

☛Highlight the desired party you want to make a private call to ➔ 9.

☛To end a private call and return to the normal multi-party call ➔ 8.

2While you are on a private call, other parties can continue with their conversation.

Ending the multi-party calls

☛To end the multi-party calls, or SK2.

☛To disconnect a specific party on a multi-party call (only when you are a host of the

multi-party calls), highlight the party you wish to disconnect ➔ .

Recording a call

You can record the conversation during the call. To play the recording, p.72 “Recording/playing

voice memo or setting speaker”.

☛During a call, press and hold ▼ or 0 to display the Voice memo screen ➔ SK1

to start the recording ➔ SK1 to pause and SK2 to stop the recording.

Scratchpad number

Your phone has a scratchpad facility that enables you to take down a phone number during a

call and then make a call to it when you have finished. This scratchpad number can be stored

in memory for future use.

Noting & calling a scratchpad number

☛During a call, key in the number to be placed in the scratchpad. It will be shown on your

phone’s screen ➔ when the call is finished. The number will still be displayed ➔

to dial the displayed number.

Call options (M43)

From Call options, you can display the list of missed, received and dialled calls, the duration

of the last call made and all calls, charge information and the failed auto-redial numbers.

☛ 4 3 to display the Call options screen.

Call options (Sheet 1 of 2)

1 Missed calls Displays the list of missed calls (p.4 for shortcut).

2 Received calls Displays the list of received calls (p.4 for shortcut).

18 Basic Calls & Phone Use

Missed/received/dialled calls Options menu (M431M/M432M/

M433M)

☛ 4 3 1 for missed calls, 4 3 2 for received calls, or 4 3 3 for dialled calls.

☛Highlight a number in the list ➔ .

Call settings (M16)

From the Calls screen, you can change various call settings: the call diversion, call waiting,

auto redial, and line ID.

3 Dialled calls Displays the list of dialled calls (p.4 for shortcut).

4 Last call duration Displays the duration of the last call made on your phone.

5 Total calls

duration Displays the duration of the total calls made on your phone.

6Charge info

Displays the charge information (Advice of Charge - AoC) which

includes the total charge, maximum charge and the unit price. To

reset the display to zero, set the maximum charges or edit the unit

price, you may be prompted to enter the PIN2 code.

7 Failed auto-redial

numbers Displays the numbers to which auto redial failed 10 times.

☛To delete a number, highlight the number and SK1.

2All the numbers are deleted after you switch your phone off and on.

2If dialled call is not successfully connected (e.g. number busy), the auto

redial function will be offered (p.19). If you have set auto redial and the call

still fails 10 times, the number called will be added to the Failed auto-redial

numbers list.

2The auto redial function will not be activated again for the Failed auto-

redial numbers.

Missed calls/Received calls/Dialled calls Options menu

1 Call Calls the current number.

2 Create message Creates a new message to the highlighted phone number.

3 Add to phonebook Adds the current number to the phonebook.

4 Delete one Deletes the current number.

5 Delete all Deletes all the numbers in the list.

6Info Displays information on the current number.

7 Add desktop icon Creates a desktop icon of the selected number.

8Items/Page Selects either to display 4 or 8 phone numbers in one screen.

Call options (Sheet 2 of 2)

SIM

Basic Calls & Phone Use

Call diversion (M161)

,There will be a short delay while the network sends the divert status of your

phone.

,There may be an additional charge for this service depending on your network.

,There may be unavailable settings depending on your network.

Setting Call diversion

☛ 1 6 1 ➔ or to select the type of call you wish to divert.

☛Highlight one of the conditions ➔ Edit the number field.

☛If the settings are correct, SK1.

Call diversion edit options menu

☛Highlight the required edit field ➔ .

Call waiting (M162)

This facility informs you that another call is being made to your phone while an existing call is

in progress.

Setting up call waiting

☛ 1 6 2 ➔ 1 1 to activate, 1 2 to deactivate the call waiting, or 2 to check the status

of call waiting.

Using call waiting

☛If you are on a call and another comes in, you will be alerted by a beep in the earpiece

➔ SK1 to accept the incoming call.

☛To switch the calls, SK1.

☛To merge the calls, SK2 (p.16 “Multi-party calls”).

☛To end the current call, .

☛To retrieve the held call, SK1.

Auto redial (M163)

With the auto redial facility, your phone will redial a number up to 10 times if the first attempt

fails. A tone will be heard at each redial attempt. Your phone cannot connect a call if the other

party is busy or if there are network problems. Pressing SK2 during a redial attempt will abort it.

☛ 1 6 3 ➔ 1 to activate or 2 to deactivate the auto redial facility.

Call diversion edit options menu

1 Copy Copies the number in the edit field.

2 Paste Pastes the previously copied number.

3 Disable all Disables the numbers from all the fields.

4 Phonebook Displays the phonebook to insert a number in the edit field.

5 Add to phonebook Adds the number to the phonebook.

20 Basic Calls & Phone Use

2If the tenth attempt still fails, the number will be added to the Failed auto-redial numbers list (p.18).

2The auto redial function will not be activated again for the Failed auto-redial numbers.

Line ID (M164)

The line ID facility enables you to choose whether or not

to send your own phone number when you make a call

and also whether or not to display a caller’s phone

number when you receive a call.

☛ 1 6 4 to display the Line ID screen with a ✔

over an activated line and a ✘ over a deactivated

line.

☛To set the status of each line (see the table on the right), highlight a line (the line will

flash when selected).

☛SK1 to set the line identification on or off ➔ to save the current settings.

International dialling codes

When you make an international call from any country, you must start by dialling a special

international access code. Your phone has the facility to prefix a + symbol to the numbers, so

that you need not enter the access code for the country that you are calling from.

Entering international dialling codes

☛Hold down 0. The 0 character displayed will change to a + character ➔ Key in the

country code, area code, and phone number that you wish to call.

The UK country code is always 44, no matter what country you are dialling from. For

example, a typical UK number of 0131 1234567 is entered as:

Roaming

,You will be charged for calls forwarded to you while roaming.

The roaming facility enables you to use your phone in many parts of the world and pay all

charges through your normal service provider. Your network operator usually has agreements

with named networks in other countries so that automatic roaming can take place with these

named networks. The phone also allows you to set network preferences of your own.

When dialling, you will need to add the international access codes if required. So, storing all

numbers with the codes (such as +44 for UK) is helpful (“Entering international dialling codes”).

2Before leaving your home country, you should select any preferences such as bar calls or call diversion.

Setting Automatic or Manual network selection (M181)

☛ 1 8 1 ➔ 1 to select the automatic mode or 2 to select the manual mode.

International access country code area code phone number

+ 44 131 1234567

Line type Setting

Outgoing Send own #

Show connected #

Incoming Show Incoming #

Return own #

Text Entry

,Before you manually select a network, ensure it is covered under the agreement you

have with your service provider.

New search (M182)

☛ 1 8 2 to search the available networks ➔ Highlight the desired network ➔ to

connect to it.

Viewing/editing network list (M183)

,Before editing your network list, please consult with your service provider.

☛ 1 8 3 to read the network list in the SIM memory ➔ Highlight the required network

➔ .

Selecting the frequency band (M184)

You have to select the frequency band to suit the location.

☛ 1 8 4 ➔ Select the required frequency band.

2Frequency bands must be adjusted to suit the location when roaming (Europe, US, etc.), for the phone

to work properly.

Text Entry

This section describes how you enter text.

Mode change

☛With a text entry screen displayed, SK1 to change the text entry mode: T9® English text,

Normal text (ABC), Numeric input.

T9® English text input

Your phone incorporates T9® Text Input, enabling fast, easy and intuitive text input. For each

letter to be keyed in, you only need to press the alphanumeric key once. The screen will display

the word you may require based on the internal English dictionary of your phone.

☛With a text entry screen displayed, SK1 until the entry mode is T9® English input.

SIM list Options menu

1 Add Adds a new network to the list.

2Move Moves the highlighted network within the list.

☛Use ▲ and ▼ to move the network ➔ SK1.

3Remove Deletes the highlighted network.

22 Text Entry

☛To enter “dog” for example, 3 6 4 and then 0 to confirm the word. For other functions,

see the table below.

Normal text input

☛With a text entry screen displayed, SK1 until the entry mode is Normal text (ABC) input.

☛For example, to enter “e,” press 3 twice; to enter “f,” press 3 three times. For other

functions, see the table above.

2When you are in the Normal text (ABC) input, any word entered that is not in the T9® dictionary will

be registered automatically.

Numeric input

☛With a text entry screen displayed, SK1 until the entry mode is Numeric input.

☛Use alphanumeric keys to enter numbers.

Key Function T9 ABC

0Confirms a word and inserts a space. ✔✔

1Inserts . , - ? ! ’ @ : ; / 1 symbols. You can also

include 1 as a single quote when inputting “we’re”

(93173), “it’s” (4817), etc.

✔-

SK2(List) Displays the list of other matching words. ✔-

SK1(Spell) Available after SK2(List). Activates the Spell word

field. Input a word in normal text input and SK1 or

. The word you entered will be saved in the T9®

dictionary.

✔-

SK2(Dismiss) Available after SK2(List). Cancels the T9® matching

word list.

✔-

or Places the cursor. ✔✔

0 to 9 (press and hold) Inserts the number. ✔✔

CLR

Deletes a character according to Clear mode setting (p.35)

✔✔

Toggles between lower case, shift (upper case for

one letter) and caps lock (permanent upper case). ✔✔

(press and hold) Press and hold to activate the highlight mode (p.35

“Highlight mode”). ✔✔

# (press or hold) Activates symbol mode when no word is high-

lighted. Use ▲ and ▼ to select the row, and then

press the appropriate number on the column of the

required symbol.

✔✔

Desktop icons

Desktop icons are shortcuts to functions or items. You can activate a desktop icon on the

standby screen (desktop) instead of following the menu and pressing the shortcut numbers.

The desktop icons are displayed in two rows on the standby screen (p.5 “Displays and icons”).

There are two types of desktop icons: the automatically displayed and the manually created.

2You can delete all the automatically displayed icons by pressing and holding CLR on the standby

screen.

2If you turn the phone off, all the automatically displayed desktop icons are deleted.

Creating a desktop icon manually

☛Highlight the required function (Camera, Video, Music player, Calculator, Clock alarm,

Scheduler, ToDo list, Notepad, Voice memo, Currency, Bluetooth Voice/Modem or

Bluetooth data exchange) or display the item (image file, note file, phone number, Email

address or URL).

☛For functions, SK1.

☛For items, to display the Options menu and select Add desktop icon (for an

image/note file, this menu is under Use item).

2You can create up to 10 desktop icons.

2If you have more than 5 desktop icons, an arrow will be displayed to indicate that you can scroll for

more icons.

2The phone number, Email address or URL desktop icon data will not be updated when the original

data is modified. Delete the old desktop icon and create a new one in such a case.

2When you create a desktop icon of an image file or notepad file, the file will be automatically

protected. The default title will be the user title. Even if the user title is changed, the desktop icon

title will remain the same.

2Each manually created desktop icon has a title that you can edit.

Activating a desktop icon

☛ ➔ Highlight the required desktop icon ➔ .

2If you activate an automatically displayed desktop icon, it will be deleted automatically.

Desktop icon Options menu

☛Highlight a desktop icon ➔ .

Desktop icon Options menu

1 Edit title Edits the title of the highlighted desktop icon.

2 Delete one Deletes the highlighted desktop icon.

3 Delete all Deletes all the manually created desktop icons.

24 Settings (M1)

Settings (M1)

Phone (M11)

☛ 1 1.

Phone (Sheet 1 of 2)

1Voice

volume Adjusts the sound volume output from the earpiece.

☛Use ▲ ▼, Side keys or 0 to 9 to adjust the volume.

2You can also press the Side keys to display the volume control screen and to

adjust the volume setting.

2During a call, use the Side keys to adjust the setting of the volume.

2When you change this setting while a headset is connected, the changed

volume will be valid only when you have a headset connected.

2Answer

options 1 Any key

answer On: Any key (except , SK2, the Side keys) is

valid to answer a call.

Off: Only and SK1 are valid to answer a call.

2 Ring silencer On: Pressing one of the Side keys stops the ringer

sound and the vibrator while receiving a call

with the phone closed. This function cannot be

used if the Side keys are locked.

3 Fold answer

: You can answer an incoming call by opening your phone.

3 Side key Disable: Side keys are locked while your phone is folded.

You can also lock/unlock the

Side

keys by pressing and holding on the standby screen.

4 ALS setup

If your SIM card supports ALS (Alternate Line Service), you can setup

which line to use for Outgoing call or Voice mail.

5Clock 1 Show clock Sets to display the local time, both the local and

remote times or no time on the main-display.

2Set time Sets the time for the local or remote time.

3Set date Sets the date.

4 Set date format Selects the date display format.

5 Set time format Selects the time display format (12 or 24 hour).

6Set timezone Sets the timezone. (A ✔ is placed on the currently

selected timezone.)

☛Highlight the required timezone ➔ SK1.

2If the highlighted timezone has Daylight Saving, a

check box will be displayed at the bottom of the screen.

to activate (✔)/deactivate the setting.

SIM

Settings (M1)

Phone modes (M12)

Your phone can be set to one of the following modes: Normal mode, Meeting mode or Pocket

mode.

Selecting your phone mode

☛ 1 2 (p.4 for shortcut) ➔ Press the appropriate key for the required mode.

2You can also set the Meeting mode or return to the previous mode by pressing and holding ▲ on

the standby screen.

Editing the mode settings

,Any changes made to the settings while in a particular mode will be stored and used

when that mode is selected again.

☛ 1 2 (p.4 for shortcut) ➔ Highlight the required mode ➔ SK1 ➔ Press the

appropriate number for the required setting in the following table.

2For any volume setting, use ▲ ▼, Side keys or 0 to 9.

2When you change any volume setting while a headset is connected, the changed volume will be

valid only when you have a headset connected.

5Clock 7 Set start day Selects to start the week on Sunday or Monday.

2This setting affects the functions related to the day of

the week, such as Scheduler.

6 Language Selects the language the phone displays.

2Even if you change the language settings, some names, such as that of desktop

icons and pre-set folders in My data, do not change.

7LED Selects the Light Emitting Diode (LED) colour.

2If the personal setting or the Group setting for the LED colour is also set in the

phonebook, it has priority over this LED setting (p.51 “Allocating a LED colour”).

8 Earphone

type Selects the earphone type depending on your earphones (headset).

Phone mode setting (Sheet 1 of 2)

1 Ringer 1 Select ringer

Selects the Sound or Video for incoming calls (p.59

“Sounds (M62)” or p.59 “Videos (M61)”).

2If the Video is set, it will sound and will be displayed

regardless of the CLI picture setting for the personal data in

Phonebook (p.51 “Allocating a picture as a CLI”).

Phone (Sheet 2 of 2)

26 Settings (M1)

Main-display (M13)

☛ 1 3.

1Ringer 2Ringer

volume Sets the sound volume for incoming calls.

2While receiving a call with your phone open, the ringer

volume can also be adjusted by pressing the Side keys.

2While using a wired headset, you can set the volume for the

wired headset. The volume settings for the wired headset and

the speaker of the phone are saved individually.

2While using a Bluetooth headset hands-free kit, however, the

volume setting for the speaker of the phone is used.

2SMS

tone 1 Select tone

Selects the ringtone for incoming SMS (p.59 “Sounds (M62)”).

2 Tone volume Sets the sound volume for incoming SMS.

3Mail tone1 Select tone Selects the ringtone for incoming Mail or MMS (p.59

“Sounds (M62)”).

2 Tone volume Sets the sound volume for incoming Mail or MMS.

4 Key tone Turns on/off the key tone.

5 Service tone Turns on/off the service tone.

6 Alarm volume Sets the sound volume for Clock alarm and Schedule

alarm.

7Vibrator Turns on/off the vibrator function.

8 Earphone setting Selects the sound output from Earphone & Speaker or

Earphone.

2This option affects the wired headset.

9 Auto answer Selects whether to answer the first incoming call auto-

matically. You have to answer the second call manually.

2To use the Auto answer function, connect the headset to your

phone and set the earphone volume to 1 or higher. If the

earphone volume is set to 0, you must turn the vibrator ON to

use the Auto answer.

Main-display

1 Greetings Selects the greeting which is displayed on the main-display during

phone start-up from No greeting, Text or Animation.

☛If you select Text greeting, SK1 to edit the greeting text. Key in a

greeting text and .

2 Wallpaper Selects a picture or video file to use as the background for the main-

display.

Phone mode setting (Sheet 2 of 2)

Settings (M1)

External-display (M14)

☛ 1 4.

Power saving (M15)

☛ 1 5.

☛Select the power saving level from Level 1 (minimum power save setting), Level 2

(moderate) and Level 3 (maximum).

Calls (M16)

☛ 1 6 (p.18 “Call settings (M16)”).

Security (M17)

☛ 1 7.

The security settings will help to protect your phone from improper and unauthorized use. You

may be required to enter one of the five codes (PIN, PIN2, PUK, PUK2 and security code).

When the phone prompts you for one of these codes, key in the appropriate number.

,If you forget any of these codes, ALWAYS contact your service provider as they are

the ONLY source for your codes.

3 Main menu style Selects and resets the background and icons for the Main menu

screen.

4 Colour style Selects the phone’s colour theme.

External-display

1 Clock/Event

display Selects which items to display on the external-display.

2The display time of the external-display is approximately 15 seconds.

2 Demo scroll 1DisplayTurns on/off the demonstration of scrolling logos.

2The scroll on the external-display may appear different

depending on the status of the phone.

2 Text Edits the text of scrolling logos (available only when turn-

ing on the demonstration of scrolling logos).

3 Clock

selection Selects the type of clock to be displayed on the external-display.

2When selecting Digital 2 clock, no icon will be displayed.

4 Incoming call

No. Turns on/off the function to display the incoming call number.

Main-display

28 Settings (M1)

PIN code

PIN code is provided by your network service provider to protect your SIM card if it is stolen.

Your phone can be set up so that your PIN code must be entered at power up before the

phone can be used at all. If the PIN code is not entered, not even incoming calls can be

answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session)

will invalidate the correct PIN code. In such a case you will have to contact your service

provider for a Personal Unblocking Key (PUK) code to unblock your SIM card.

2Some SIM cards are set up so that PIN number entry cannot be turned off.

PIN2 code

PIN2 code is provided by your network service provider for charge information and Fixed

dialling services protection. Your phone supports advanced feature that may require a PIN2

code to be entered before they can be accessed or modified. Entering your PIN2 code

incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2

code. In this case you will have to contact your service provider for a PUK2 code.

,The PIN2 code is SIM card related and may only be available from your service

provider.

Security (Sheet 1 of 2)

1 Change PINs Changes the PIN or PIN2 code (PIN activate setting must be turned on

to change the PIN code).

2You can change the PIN code when PIN activate setting is turned on.

2 PIN activate Turns on/off the PIN code entry required at starting up the phone.

3 Change

security code Changes the security code which is used to set some of functions and

unlock the Personal Information Manager (PIM) features.

2The default setting of the security code is “0000”.

4 Phone lock Turns on/off the Phone lock function which will lock the phone: you

can only make emergency calls or enter the security code. After enter-

ing the correct security code, you can use the phone normally.

2Upon power-up, you are prompted to enter the security code if the Phone

lock was active when the phone was powered down.

5 Bar calls You can bar the calls made/received on your phone.

1Change

settings ☛Highlight the type of restriction and the call type,

and then ➔ to save changes.

☛Key in your bar calls password to verify user

identification to the network ➔ SK1 to confirm and

save changes to the network.

2The selected settings have red bars over their icons.

2Set

password Changes the bar calls password.

Settings (M1)

Network (M18)

☛ 1 8 (p.20 “Roaming”).

Reset settings (M19)

☛ 1 9.

This function will reset your phone to its factory settings.

,By restoring the factory settings, any changes you have made to your phone

EXCEPT for the following will return to the factory settings (i.e. the following data/

settings will not be reset):

•Settings: Set time for Local time, Set date, Language, all settings in Calls other than Auto

redial, all Security settings other than Change security code, SIM list settings in Network.

•Call options: Information in Charge info.

•Phonebook: All Phonebook entries. The settings for Groups.

•Accessory: All Schedule, ToDo, Notepad and Voice memo entries. All the settings other

than Clock alarm, Play list for Music player, View events for Scheduler, Sort for ToDo, and

Timer setting and My phone settings for Bluetooth.

•i-mode: All Bookmarks, Saved pages, Go to webpage, and Mail settings. All the i-mode

related settings.

•Java™: All the Java™ applications.

•Message: All the stored messages. The settings for SMS centre, Validity period for SMS

and Language for Cell Broadcast.

•My data: All stored files.

6 Fixed dialling Turns on/off the fixed dialling which restricts the use of the dialled

number to only the Fixed Dialling Numbers (FDN) (p.49).

Security (Sheet 2 of 2)

30 Message (M2)

Message (M2)

Message overview

Your phone supports the following messaging services:

•Short Messaging Service (SMS) including Enhanced Messaging Service (EMS)

•Mail (i-mode messaging service) (p.36 “i-mode (M3)”)

•Multimedia Messaging Service (MMS) (p.36 “i-mode (M3)”)

Sending/Receiving messages

While an SMS message is being sent or received, a name (if a name has been stored with the

number in your phonebook) or a number will be displayed. The received messages are stored

on the SIM card or in your phone memory.

2Please delete the unnecessary messages in the folders from time to time. The phone cannot receive

any messages when the Inbox folder is full.

Message screen

☛To display the Message screen, 2 (p.4 for shortcut).

Reading a message (M21)

☛To display the Message view screen of a new message, 2 1 (p.4 for shortcut) ➔

Highlight the new message ➔ .

☛The new (unread) messages are displayed in bold.If the message cannot be displayed

in one page, use ▲ and ▼ to scroll through the message.

Message screen menu

1 Inbox The received messages are stored here.

2Drafts The messages currently being edited are stored here.

3Outbox The messages that failed to be sent are stored here.

4Sent The sent messages are stored here.

6Folder1/Folder2 The messages moved by Move msg (p.32 “Message list Options

menu”) are stored here.

7CB The received broadcast messages are saved (p.35 “Cell broadcast

(M27)”).

Message (M2)

The following icons will be displayed.

Message Options menu (M2M)

☛ 2 (p.4 for shortcut).

Message type icons Read / Unread status icons

SMS message New / Unread message(s)

Incomplete SMS message Read message(s)

Storing location icons Sent message status icons

Stored in SIM Sent but failed message

Stored in the phone memory Sent message

Sorting status icons Filtering status icons

Sorted by Date SMS filtered by status (incomplete)

Sorted by Name SMS filtered by location (SIM)

Sorted by Read/Unread status SMS filtered by location (Phone)

Sorted by Size Filtered SMS

Sorted by Ascending order

Sorted by Descending order

Message Options menu (Sheet 1 of 2)

1 SMS settings 1SMS centre Edits the SMS centre number (this number is

saved in the SIM card).

2 Auto display Turns on/off the automatic display function

that displays the received SMS automatically.

3 Receipt request Selects whether to request a receipt of the

sent SMS.

4 Max linked msgs Sets the maximum number of linked SMS.

This function divides an SMS with the mes-

sage text exceeding the maximum number of

characters allowed into multiple messages.

5 Validity period Selects the period of time an SMS is stored at

the SMS centre, while trying to deliver the

message.

2 CB settings 1 Enable 1 to receive none, 2 to receive all, or 3 to

specify a list of Cell Broadcast Message Iden-

tifier (CBMI) to receive broadcast from.

2 Languages Selects which language to receive CB in.

32 Message (M2)

Message list Options menu

☛Display the message list ➔ .

Message view Options menu

☛Display the message list ➔ Highlight a message ➔ ➔ .

3 View msg status Displays the information on the message memory status.

4 Rename folder Renames Folder1 and Folder2.

5View all Displays all the messages in all folders on the same list.

6 Msg filter Selects the filtering option to display the matching messages.

Message list Options menu

1Reply Replies to the sender of the highlighted message.

2 Reply all Replies to the sender and all other recipients of the highlighted message.

3 Delete Deletes the highlighted message.

4 Delete all Deletes all the messages in the current folder.

5Forward Forwards the message text of the highlighted message.

6 Msgs/page Selects either to display 3 or 7 messages in one screen.

7Move msg Moves the highlighted message, or copies to SIM or Phone.

8Sort msg By: Sorts the messages by date, name, read/unread status or size.

Order: Sorts the messages in ascending or descending order.

9Search Searches messages by alphabets.

0 View details Displays the detailed information on the highlighted message.

– Add desktop

icon Creates a desktop icon of the sender or recipient of the highlighted mes-

sage (Inbox, Sent, Folder1, Folder2, and Drafts only).

–Edit Edits the highlighted message (Drafts and Outbox only).

– Resend Resends the highlighted message in the folder (Outbox only). The entire

message or only the packets that failed to reach can be sent.

Message view Options menu (Sheet 1 of 2)

1Reply Replies to the sender of the highlighted message.

2 Reply all Replies to the sender and other recipients.

3 Delete Deletes the highlighted message.

4 View details Displays detailed information on the highlighted message.

Message Options menu (Sheet 2 of 2)

Message (M2)

2The reply facility uses the phone number of the person who sent the message.

Extract data Options menu

☛Display the message list ➔ Highlight a message ➔ ➔ 9 / / to

highlight an item in the message ➔ .

P: Phone number highlighted, E: Email address highlighted and U: URL highlighted

5 Forward Forwards the message text of the highlighted message.

6 Save object Saves the highlighted object to a folder in My data.

7 Move msg Moves the highlighted message, or copies to SIM or Phone.

8 Highlight mode Activates the Highlight mode (p.35 “Highlight mode”).

9 Extract data Highlights the phone number, Email address, URL or object to use

the Extract data Options menu function for the highlighted data.

0 Add desktop icon Creates a desktop icon of the sender or recipient of the highlighted

message.

P E U Extract data Options menu

1 1 – Add to phonebook Adds the highlighted item to the phonebook.

2 – – Dial phone number Dials the selected phone number.

– – 1 Add to bookmark Adds the highlighted URL to the bookmarks.

– – 2 Go to URL Activates the web browser to access the highlighted URL.

3 2 3 Create message Creates a new message with the highlighted item in the To

field, the message text, or the slide text.

4 3 – Add desktop icon Creates a desktop icon of the highlighted item.

5 4 4View mode Returns to the message view screen.

Message view Options menu (Sheet 2 of 2)

34 Message (M2)

Creating a message

☛To display the Message composer screen, 2 and SK1 (p.4 for shortcut).

☛To address the message, highlight the To field ➔ ➔ Input the required phone

number ➔ .

2You can send an SMS up to 5 recipients.

2To scroll the phone numbers in the To field, or .

☛To key in the message, highlight the Message field ➔ ➔ Key in the message ➔ .

2Pressing while keying in the To/Message field displays the Message edit Options menu

screen.

☛SK1 to send the message.

2If you display another screen or receive a call while you are editing a message more than 1

character, the message will be saved automatically in Drafts.

Message composer Options menu

☛ 2 and SK1 (p.4 for shortcut) ➔ Highlight To or Message field ➔ .

Message composer Options menu

1Add/Edit Adds or edits a recipient’s phone number or a message.

2 Preview msg Displays a message preview screen.

3 Delete Deletes the highlighted recipient, message, or object.

4 Delete all Deletes all the recipients.

5Save Saves the message in Drafts folder.

6 Phonebook Displays the phonebook list to insert a recipient’s phone number.

7 Resend list Inserts a phone number from the resend list.

☛ 1 or 2 respectively to delete the highlighted phone

number from the resend list or the entire resend list.

8 Insert Inserts a new recipient’s phone number (To field only).

9 Address list Displays the recipients of the message (To field only).

Help area

This area contains the

information on the message.

S indicates the size of the

message equivalent to the

number of SMS messages, and

R indicates the remaining

number of characters

available, depending on

Max linked msgs setting (p.31).

(Example shows setting of 10.)

(green) An upper case letter

will be input next.

(red) Caps lock mode

(no arrow) A lower case letter

will be input next.

Message (M2)

Message edit Options menu

☛ 2 and SK1(p.4 for shortcut) ➔ Highlight To or Message field ➔ ➔ .

Cell broadcast (M27)

Cell broadcast (CB) messages (e.g. weather reports, news) are sent by the network to all

phones in a certain area.

☛ 2 7.

2The Cell broadcast message display on the standby screen is erased by pressing CLR.

,Please contact your service provider for details.

Message edit Options menu

1 Text colour Selects the colour of text and background.

2 Text format Selects the font size and font style.

3 Text

alignment Sets the text alignment.

4 Paste Pastes the text which has been copied onto the clipboard in the High-

light mode.

5 Highlight

mode Activates the Highlight mode at the cursor position when text has been

entered.

2You can also activate the Highlight mode by pressing and holding .

2To toggle the Highlight mode on/off, SK1. To cancel, CLR.

☛To display the following Highlight mode Options menu, .

1 Text colour Selects the colour of text and background.

2 Text format Selects the font size and font style.

3 Copy Copies the highlighted part of text onto the clipboard.

4Cut Cuts the highlighted part of text.

5 Delete Deletes the highlighted part of text.

6 Select word Highlights the nearest word to the current cursor

position.

7 Select

paragraph Highlights the nearest paragraph to the current cur-

sor position.

8 Select all Highlights the entire text.

9 Save to text

file Saves the highlighted part of text as a text file in the

list of Notepad.

6 Insert object Inserts an object into the message at the cursor position.

7 T9 Language Selects the language for T9® text input.

8 Edit settings Sets the Write mode and Clear mode.

36 i-mode (M3)

i-mode (M3)

Using your phone, you can enjoy i-mode services such as browsing i-mode sites (programs)

and sending/receiving mail and MMS (p.5 for icons).

2You can download melody files, images, animations, Flash, videos and Java™ applications and save

them in My data. Some files with restrictions cannot be saved, even though they can be downloaded

and played or displayed.

i-mode operation guide

The following table gives an outline of the procedures related to the i-mode services.

Action Procedure

Browsing the i-mode sites/Internet web pages

Display the homepage ☛SK2 ➔ 6 ➔ 3 (p.4 for shortcut).

2You need to set the homepage URL in Set homepage

beforehand (p.43 “Set homepage” ).

Display a web page ☛SK2 ➔ 6.

Reload the current page ☛While browsing a webpage, 1.

Display the URL of the current

page ☛While browsing a webpage, 2.

Bookmark a web page ☛With the web page you want to bookmark displayed,

Display a bookmarked web

page ☛SK2 and 5 (while browsing a webpage, 2) ➔

highlight a bookmark ➔ .

Save a web page ☛With the page to save displayed, 4.

Display a saved page ☛SK2 ➔ 7 ➔ Highlight a saved page ➔ .

Save an image ☛With the page including the image to save

displayed, 3 ➔ .

Save a phone number ☛With the highlighted phone number on the page,

Display the certificate

information of the current page ☛With a page displayed, 6.

2You can also refer to a saved page's certificate information

by displaying the page and 3.

Download a file ☛Highlight the link to the file to download ➔ ➔

When the download is completed, save the file and

check that the downloaded file is stored in My data

(p.59) or the Applications screen (p.64).

i-mode (M3)

Streaming/downloading a video

There are three types of video depending on the download site or data type: the video that can

be played after downloading, the video that can be played while downloading, and the

streaming video that can be played while downloading but cannot be saved to your phone

(p.59 “Operations while replaying video” ).

2The maximum size of a video that you can download is 2 MB.

Streaming a video

☛While browsing a webpage, highlight the link to the video to stream ➔ .

2If you are not in the EDGE service area but in GPRS service area, you cannot activate

the streaming video.

2Streaming has priority over the incoming call/message/Clock alarm/Scheduler

reminder.

Playing a video while downloading

☛While browsing a webpage, highlight the link to the video to download ➔ .

☛After download is completed, 1 to play again, 2 to save or 3 to display detailed

information on the video.

☛To cancel the download before downloading is complete, SK2 or CLR.

Play a video by streaming ☛Highlight the link to the video to stream ➔ .

(“Streaming/downloading a video”)

Download a video ☛Highlight the link to the video to download ➔ .

(“Streaming/downloading a video”)

Returning to the previous

screen/moving forward to the

next screen

☛ While connecting to i-mode, to return to the

previous screen (if any), or to move forward to

the next screen (if any).

Mail/MMS

Create a mail ☛SK1 ➔ 1 (p.38 “Creating a new mail” ).

Create an MMS ☛SK1 ➔ 2 (p.38 “Creating a new MMS” ).

Read a mail /MMS ☛SK1 ➔ 3 ➔ Highlight a message ➔ .

Check for new mail/MMS ☛SK1 ➔ 6.

Settings for i-mode

Change the mail settings ☛SK1 ➔ 7 (p.48 “Mail settings” ).

Change the browser settings ☛SK2 ➔ 8 (p.43 “Settings” ).

Change the phone settings

related to i-mode ☛ 3 2 (p.41 “Settings” in "i-mode screen

menus").

Action Procedure

38 i-mode (M3)

2If the download is interrupted, you can resume downloading the same video from where

it was interrupted. The download may start from the beginning for some files depending

on the server, file type, and other conditions.

2Even if the download continues from where it was interrupted, the replay starts from the

beginning.

2To play while downloading, Video auto play must be activated in advance (p.43 “Video

auto play” ).

Options menu (during pause/stop)

☛ while the video is paused or stopped.

2Pause is not available for the streaming video that is currently broadcasted on a server.

Mail/MMS operations

Creating a new mail

☛SK1 ➔ 1.

☛Set the addressee.

Highlight the To field ➔ ➔ Key in the destination ➔ .

☛Key in the subject.

Highlight the Subject field ➔ ➔ Key in the subject ➔ .

☛Key in the message.

Highlight the Message field ➔ ➔ Key in the message ➔ .

☛Attach a file if necessary.

Highlight the Attachment field ➔ ➔ Select a file to attach from the My data screen.

2You can attach files up to 299 KB in total, or 10 files.

☛To send the mail, highlight Send ➔ .

Creating a new MMS

☛SK1 ➔ 2 ➔ The Compose menu screen is displayed.

☛Using Compose menu options, create an MMS (“Compose menu options”) ➔ SK2 ➔

The Compose MMS screen is displayed.

☛Set the addressee and key in the subject (p.38 “Creating a new mail” ).

☛To send the MMS, highlight Send ➔ .

Options menu (during pause/stop)

1 Full screen Turns the Full screen on/off for Sub-QCIF.

2View detail Displays detailed information on the video (not available for the video

that can be played while downloading).

i-mode (M3)

Compose menu options (Sheet 1 of 2)

– Add/

Overwrite/

Delete

media

1 Add/Edit/Delete

text Adds new text data or deletes the text data in the

text field on the slide.

2 Add/Overwrite/

Delete image Adds an image file or deletes the image file in the

image field on the slide.

3 Add/Overwrite/

Delete audio Adds a sound file or deletes the sound file in the

sound field on the slide.

4 Add/Overwrite/

Delete video Adds a video file or deletes the video file on the

slide.

–Exit Shifts to the Compose MMS screen.

– Save Saves the currently created MMS.

–Preview Displays the created slides in order from the beginning at the preset

playback time for each.

– Add slide 1 Add slide Adds a new slide after the currently displayed

slide.

2 Insert slide Inserts a new slide just before the currently dis-

played slide.

– Delete slide Deletes the currently displayed slide.

– Text colour Selects the Text colour.

– Background

colour Selects the Background colour.

– Set Fit mode Selects the size in which the image/video is displayed. This setting will

be applied to all the slides.

1Hidden Displays the image/video in the actual size.

2Fill Displays the image/video in the reduced size so

that the height and width fit into the image/video

display area.

3 Meet Displays the image/video in the reduced size so

that the longer side of the height or width fits the

corresponding side of the image/video display

area.

4Slice Displays the image/video in the reduced size so

that the shorter side of the height or width fits the

corresponding side of the image/video display

area.

40 i-mode (M3)

Using the Edit menu options

☛From the Compose mail/Compose MMS/Edit mail/Edit MMS screen, to display

the Edit menu options.

Reading a received mail/MMS

☛SK1 ➔ 3 ➔ The list of mail/MMS in the Inbox folder will be displayed (p.45 “Inbox” ).

☛Highlight the message to read ➔ ➔ The message content will be displayed. Scroll

the message content.

☛To view the previous message , to view the next message, .

– Options Sets the length of time a slide is displayed, and sets the beginning and

end times for text, image or sound within that slide display time.

2You cannot set the beginning and end time for video files.

–Resize

region Changes the region size of the image/video field and the text field, using

the ▲ and ▼ keys.

–Switch

positions Switches positioning of the image/video field and text field on the slide.

– Previous

slide Displays the previous slide.

– Next slide Displays the next slide.

Edit menu options

– Send Sends the mail/MMS.

– Save Saves the mail/MMS being edited to the draft folder.

– Attach file Attaches a file to the mail.

– Delete attachment Deletes the attached file(s).

– Play/View file Plays or displays the attached file.

– Open phonebk. Adds the destination directly from the phonebook.

– Add To/Cc/Bcc Adds a To/Cc/Bcc field.

– Change to To/Cc/Bcc Changes the highlighted Cc/Bcc/To field to a To/Cc/Bcc field.

– Del. address Deletes a destination field.

– Attach header/sign. Attaches a stored opening sentence at the start or a stored

signature at the end of the text.

– Del. message Deletes the message of the mail being edited.

–Del. mail Deletes the new message currently edited.

Compose menu options (Sheet 2 of 2)

i-mode (M3)

2If Auto play is on (p.48 “Auto play” ), the MMS/attachment will be automatically played/displayed. If

not, SK1 to start playing.

2You can change the font size of mail text by pressing and holding the and . enlarges

the font size, while reduces it.

i-mode screen

From the i-mode screen you can change the i-mode related settings of your phone.

☛ 3 ➔ The i-mode screen will be displayed.

i-mode menu screen

From the i-mode menu screen you can access to the iMenu/Mail/Message screen, your

bookmarks, the entry screen for a URL to be displayed, the access history, the saved pages,

the list of Java™ applications and the browser settings.

☛SK2 or 3 1 to display the i-mode menu screen.

i-mode screen menus

1 i-mode Displays the i-mode menu screen (“i-mode menu screen menus”).

2 Settings 1Ringer timeSets the ringtone duration for incoming mail/MMS in sec-

onds.

2 Connection

No. Selects the connection number settings to use.

3 i-mode lock Locks the i-mode function, including mail/MMS.

i-mode menu screen menus (Sheet 1 of 3)

1iMenu Accesses the iMenu screen (p.44 “iMenu screen” ).

2Mail Displays the Mail screen, on which you can display received mail/MMS,

saved draft messages and sent messages, and also create new mail/

MMS (p.45 “Mail screen” ).

3 Java

application Displays the list of Java™ applications (p.64 “Java™ (M7)” ).

4SMS Displays the Message screen, on which you can read received SMS,

saved draft SMS and sent SMS, and also create new SMS (p.30 “Mes-

sage (M2)” ).

5 Bookmarks Displays the list of bookmarked web pages.

Bookmarks options menu

1Open Displays the highlighted bookmark.

42 i-mode (M3)

5 Bookmarks 2 Copy

address Copies the highlighted bookmark URL.

3 Edit title Edits the title of the highlighted bookmark.

4 Add desktop

icon Creates a desktop icon of the URL of the selected

bookmark.

5Create

message Creates a new message with the highlighted book-

mark address in the message text.

6 Delete one Deletes the highlighted bookmark.

7 Delete all Deletes all the bookmarks.

6Go to

webpage Displays the URL you key in, the URL in the address history, or the

homepage.

1Enter

address Prompts you to key in a web page address.

2 Address

history Displays the list of addresses in the access history for

you to select from.

3 Go to home Displays the homepage set in Set homepage (not

available if p.43 “Set homepage” is not set).

0 Back Returns to the i-mode menu screen.

7 Saved pages Displays the list of saved pages. Saved pages are stored in your phone

memory so you can see them offline.

Saved pages list options menu

1Open Displays the current saved page.

2 Edit title Edits the title of the current saved page.

3 Protect On/

Off Protects or unprotects the current page.

4 Delete one Deletes the current saved page.

5 Delete all Deletes all the saved pages excluding the protected.

6 Delete all +

Pr. Deletes all the saved pages including the protected.

Saved pages details options menu

1 Save image Saves an image as a file on the current saved page.

2 Edit title Edits the title of the current saved page.

i-mode menu screen menus (Sheet 2 of 3)

i-mode (M3)

7 Saved pages 3 Certificate

info Displays the certificate information on the current

saved page.

4 Page info Displays the URL on the current saved page.

5 Protect On/

Off Protects or unprotects the current page.

6 Delete Deletes the current saved page.

8 Settings Changes the settings of your browser.

1 Set time out Disconnects the connection after the set time.

2 Load images Sets whether to display images contained in web

pages.

3Wrap text Sets whether to display text as is on web pages and

mail/attachment text, or wrap it to fit your phone’s

screen.

4 Certificates Displays the certificate information and validates/

invalidates a certificate.

5Send

terminal info Sets whether to display a confirmation message

before sending the terminal information to the Infor-

mation Providers (IPs).

,If you agree to send private information (e.g.

production serial No. and SIM No.) to the IPs

via the Internet, it may be obtained by others.

6Set

homepage Validates the homepage and sets the URL.

2You can display the homepage by pressing and holding

from the standby screen.

7 Video auto

play Sets whether to play a video file automatically after or

during download.

8 Sound Sets whether to turn the sound on or off for Flash

files.

9 Check

settings Displays all the options set for the settings (browser).

0Back Returns to the i-mode menu screen (p.41 “i-mode

menu screen” ).

i-mode menu screen menus (Sheet 3 of 3)

44 i-mode (M3)

iMenu screen

From the iMenu screen you can access the various services provided by your i-mode service

operator.

☛SK2 or 3 1 to display the i-mode menu screen ➔ 1 to display the iMenu screen.

Browser Options menu

You can use the function menus of your browser such as adding a bookmark, saving a web

page and creating a message.

☛From the iMenu screen or while browsing/downloading, to display the browser

options menu.

2Pressing CLR or may not bring back the previous screen. Screen operations depend on the current

screen content.

Browser options menu

– Add bookmark Bookmarks the current page.

– Bookmarks Displays the Bookmark list.

2This option is displayed only when one or more bookmarks are registered.

– Save image Saves an image on the current page.

2This option is displayed only when one or more images are displayed on the

current screen.

– Save page Saves the current page.

–Add to

phonebook Saves the phone number displayed in the current page in the phone-

book.

2This option is displayed only when one or more phone numbers are

displayed on the current screen.

– Certificate info Displays the server certificate of the current page.

2This option is displayed only when the current page is a SSL page.

– Go to webpage Displays a page by keying in the URL or using the access history

(p.42 “Go to webpage” ).

–Reload Updates the data on the current page.

– Page info Displays the URL of the current page.

– Add desktop

icon Creates a desktop icon of the URL of the current page.

– Create

message Creates a new message with the highlighted phone number or Email

address in the message text.

i-mode (M3)

Mail screen

From the Mail screen you can use the i-mode message services.

☛SK1 or 3 1 2 to display the Mail screen.

2The same mail can be sent to up to five addresses.

2The available options differ depending on the operators.

Mail screen menus (Sheet 1 of 5)

1 Compose

mail Displays the Compose mail screen (p.38 “Creating a new mail” ).

2 Compose

MMS Displays the Compose MMS screen (p.38 “Creating a new MMS” ).

3 Inbox Displays the list of received mail/MMS.

Inbox list Options menu

– Show all Displays all the received mail/MMS.

– Show unread Displays only the unread mail/MMS.

– Show read Displays only the read mail/MMS.

– Show protect. Displays only the protected mails/MMS.

– Delete one Deletes the currently selected mail/MMS.

– Delete read

mail Deletes all the read mails except protected mails/MMS.

– Delete all Deletes all the mails/MMS.

– Title sort Sorts the received mails/MMS by title.

– Address sort Sorts the received mails/MMS by address.

– Date sort Sorts the received mails/MMS by date.

Inbox details Options menu

–Reply Replies to the received mail/MMS.

– Reply quoted Replies to the received mail quoted.

– Reply all Replies to the sender and all the recipients of a mail/

MMS.

– Reply quoted

all Replies to the sender and all the recipients of a mail

quoted.

– Forward Forwards the received mail/MMS.

– Delete Deletes the received mail/MMS you are viewing.

46 i-mode (M3)

3 Inbox – Add desktop

icon Creates a desktop icon that creates a new message to

the sender.

– Save address Saves the address of the sender into the phonebook.

– Save

selection Saves the highlighted phone number into the phone-

book.

– Create

message Creates a new message with the highlighted Email

address or phone number.

– Save melody Saves the melody attached to the received mail.

– Save

attachment Saves the attached file.

–Copy

message Copies the message text.

– Copy subject Copies the desired subject text.

– Copy address Copies the desired address.

–Play

attachment Plays the attachment content based on the content set-

ting.

Play attachment Options menu

1Copy text Copies the text data on the slide.

2 Save image Saves the image file on the slide.

3 Save audio Saves the audio file on the slide.

4 Save video Saves the video file on the slide.

–Browse

attachment Plays the attachment content manually.

Browse attachment Options menu

1Copy text Copies the text data on the slide.

2 Save image Saves the image file on the slide.

3 Save audio Saves the audio file on the slide.

4 Save video Saves the video file on the slide.

5 Save selection Saves the highlighted phone

number, Email address or URL to

the phonebook or bookmarks.

6 Create

message Creates a message to the destina-

tion in the slide text.

7 Play slide Plays the highlighted slide.

Mail screen menus (Sheet 2 of 5)

i-mode (M3)

3 Inbox – Protect On/Off Protects or unprotects the received mail/MMS.

4Sent mail Displays the list of sent mail/MMS.

Sent mail list options menu

– Title sort Sorts the sent mail/MMS by their titles.

– Address sort Sorts the sent mail/MMS by their first destination

addresses.

– Date sort Sorts the sent mail/MMS by the date they were sent.

– Delete one Deletes the selected mail/MMS.

– Delete all Deletes all the sent mail/MMS.

– Delete all + Pr. Deletes all the sent mail/MMS including the protected.

Sent mail details options menu

– Re-edit Displays the composer to edit the sent mail/MMS again.

– Delete Deletes the sent mail.

– Add desktop

icon Creates a desktop icon that creates a new message to

the addressee.

– Save address Saves the destination address to the phonebook.

– Save

selection Saves the phone number and mail address contained in

the message part.

– Create

message Creates a new message to the highlighted Email

address or phone number.

– Copy

message Starts the copy mode in the message part.

– Copy subject Starts the copy mode in the subject part.

– Play

attachment Plays the attachment content based on the content set-

ting (p.46 “Play attachment” ).

– Browse

attachment Plays the attachment content manually (p.46 “Browse

attachment” ).

– Protect On/Off Protects or unprotects the received mail/MMS.

5Draft Displays the unsent and the saved draft mail/MMS.

2If an error occurs while sending mail, it will be saved in the Draft folder as an

unsent mail.

2If you save a mail while editing, it will be saved in the Draft folder.

Draft options menu

Mail screen menus (Sheet 3 of 5)

48 i-mode (M3)

5Draft 1 Delete one Deletes the selected mail/MMS.

2 Delete all Deletes all mail/MMS.

6 Check new

mail Checks if there is any new i-mode messages (mail/MMS) for you stored at

the mail server.

7 Mail

settings Changes the mail settings.

1 Edit header Edits the header to be added at the beginning of a mail,

and sets whether to add it automatically.

☛Highlight the checkbox ➔ to place a check, to

automatically add a header.

☛Highlight the text box ➔ to edit the header ➔

Edit the text ➔ .

2 Edit signature Edits the signature to be added at the end of a mail, and

sets whether to add it automatically.

☛Highlight the checkbox ➔ to place a check, to

automatically add the signature.

☛Highlight the text box ➔ to edit the signature ➔

Edit the text ➔ .

3 Reply marker Edits the reply markers to be added when replying to a

mail with quotations from the original.

☛Highlight the text box ➔ to edit the reply marker

➔ Edit the text ➔ .

4 Auto play Sets whether to automatically play or display the sound,

image or video file attached, when you open the mail.

5 Auto

reception Sets whether to automatically retrieve a mail after

receiving the incoming mail notification.

2If set to off, you will have to manually retrieve from your i-

mode service provider (p.48 “Check new mail” ).

6 Receive

attachment Sets the attachment file type that can be received.

☛Highlight the file type ➔ to place a check.

7 Attachment

data Selects whether to receive Melody For i-mode (MFi) files

attached to a mail.

8 Font size Sets the font size to display the mail.

Mail screen menus (Sheet 4 of 5)

Phonebook (M4)

Phonebook types

Your phone can have up to 7 directories stored on your SIM card and in your phone memory:

Complete (a list of all the numbers stored in the ADN and FDN), Personal directories (ADN) in

the SIM card, Personal directories (ADN) in the phone memory, Service dialling numbers

(SDN), Fixed dialling numbers (FDN), Own number, and Voice mail number.

2When viewing any of the directories described, you can switch to the other directories (if your SIM

card supports them) by pressing .

2The maximum number of phone numbers that can be stored on a SIM card is the total of the ADN,

FDN and SDN directories.

2When you activate the phonebook, the directory which you were referring to the last time will open.

Personal directory (ADN)

These numbers are known as Abbreviated Dialling Numbers (ADN). There are two types of

ADN, one is the phonebook stored on the SIM card (the phonebook (SIM)) and the other is the

phonebook stored in the phone memory (the phonebook (Phone)).

Phonebook (SIM)

•Up to 255 personal data can be stored in the SIM card.

•Each personal data contains a name, a phone number and a location number.

2The number of phone numbers that can be stored on a SIM card depends on the SIM card capability.

Phonebook (Phone)

Up to 500 personal data can be stored in your phone memory. Each personal data is given

a location number (1 to 500), and it can be allocated to a group.

To each personal data you can set, Name, 7 phone numbers (Home, Mobile, Work, Data,

Fax, Other phone x 2), 2 Email addresses, 2 descriptive information, Group, Voice tag, LED

colour, Picture, Ringer and Location number.

2Up to 10 phone numbers can have a voice recognition recording allocated to them.

Fixed dialling numbers (FDN)

Fixed dialling numbers are a means of limiting which numbers can be called from your phone.

With the FDN feature switched on (p.29), you can call with your phone the numbers you have

stored in this phonebook and the emergency number only.

7Mail

settings 9 Check

settings Displays the values set to the above mail settings.

0 Back Returns to the Mail screen.

0 Back Returns to the i-mode menu screen.

Mail screen menus (Sheet 5 of 5)

50 Phonebook (M4)

Service dialling numbers (SDN)

The numbers stored in the SDN directory are pre-installed by your service provider. They will

call numbers and services as agreed with your supplier (e.g. customer enquiries, billing

information, sportslines, weatherlines, etc.) and cannot be edited by you.

,Although FDN and SDN are supported by your phone, they must be present on your

SIM card - check with your service provider.

Accessing your phonebook (M4)

You can store personal information in the phonebook of your phone or your SIM card.

Adding a new personal data

☛ 4 1 and the appropriate key for the desired directory, or until the required

directory is displayed ➔ SK2 ➔ Select the directory to which you wish to store the

personal data ➔ Enter the name and other necessary information ➔ SK1 (p.50

“Editing an existing personal data” ).

2You can also input phone numbers on the standby screen and to add a new personal data.

2It is best to store numbers using the international number format.

Editing an existing personal data

☛ 4 1 and the appropriate key for the desired directory, or until the required

directory is displayed ➔ Highlight the required personal data ➔ 2.

2For the own number and voice mail number settings, only the name and phone number can be added

or edited in the following procedures.

Adding/editing phone numbers, Email addresses & personal

information

☛Highlight the field you wish to edit or add information to ➔ .

☛Add the required number or information or make necessary changes to the selected

field ➔ .

☛Highlight another field to make further changes, if required.

Allocating a group

☛Highlight the Group field ➔ ➔ Highlight the group you wish to add the current

personal data to ➔ .

Phonebook list screen Personal data screen

SK2

Location number

Phonebook (M4)

Voice recall functions

Adding a Voice recall recording

☛Highlight the Voice tag field ➔ ➔ 1.

☛Say the name you wish to record as a voice tag ➔ Say the name again for

confirmation according to the displayed message.

2Up to 10 voice tags can be stored.

2You can check the number of stored voice tag and list of those tags (p.53 “Summary” and p.53

“Voice tag list” ).

Allocating a LED colour

☛Highlight the LED colour field ➔ ➔ 1 ➔ Highlight the desired colour ➔ .

2The personal setting for the LED colour has priority over the Group setting and phone setting for the

LED colour.

Allocating a picture as a CLI

You can set a picture to be displayed on the screen as a Calling Line Identification (CLI) for

an incoming call (p.60 “Pictures (M63)” ).

☛Highlight the Picture field ➔ ➔ 1 to display the picture list screen.

☛Highlight the desired picture ➔ SK1 to preview the picture or to select the

highlighted picture.

Allocating sound/video as a ringer

You can set a sound or video as a ringer for an incoming call. When a video is set, a movie

is displayed on the screen with the sound.

☛Highlight the Ringer field ➔ ➔ 1 to display the sound list screen or 2 to display the

video list screen.

☛Highlight the desired sound or video ➔ SK1 to preview the file or to select the

highlighted file.

2A ✔ is displayed on the icon for which the item is currently selected.

2If the video as a ringer is set, it will sound and will be displayed on the screen regardless of the CLI

picture setting (p.59 “Sounds (M62)” ).

Allocating a location number

☛Highlight the Location number field ➔ ➔ Key in the desired location number ➔ .

Saving the edited personal data

☛After editing the required field, SK1 to save the edited data and return to the previous

screen.

Displaying a personal data (M41)

☛ 4 1 and the appropriate key for the desired directory, or until the required

directory is displayed ➔ Highlight the required personal data ➔ .

Displaying information about your phonebook (M42)

☛ 4 2 to display the information about your phonebook.

SIM

52 Phonebook (M4)

Call options (M43)

☛ 4 3 to display the Call options screen (p.17).

Phonebook list Options menu

☛ 4 1 and the appropriate key for the desired directory, or until the required

directory is displayed ➔ Highlight the required personal data ➔ .

Phonebook list Options menu

1 Add new Adds a new personal data to Phone/SIM/FDN.

2Edit Displays the data edit screen to edit the currently highlighted personal

data. You will be prompted to enter PIN2 code for the data in FDN.

3Copy Copies the currently highlighted personal data or the selected data in the

list to another phonebook (p.53 “Copying and moving personal data” ).

4Move Moves the currently highlighted personal data to SIM, Phone, FDN, Own

number or Voice mail number.

5 Delete Deletes the currently highlighted personal data or all the data in the list.

6 Groups Editing the group information

☛Highlight the group you

wish to edit

➔

SK1

and highlight the required field

☛Make necessary changes or add information

to the selected field.

☛Highlight another field to make further changes, if required.

☛SK1 to set the change.

If the personal settings for

the LED colour, CLI picture, or the ringer are also set,

they have priority over those of the Group settings.

Group member list screen Options menu

☛Highlight the group you wish to edit ➔ to display the list of group

members ➔ Highlight the member ➔ .

☛Select the required option.

7Sort Sorts the personal data.

2Sorting may take time depending on the number of personal data entries, the

number of characters contained in each entry and the type of language.

1 Alphabetic Sorts the personal data alphabetically.

2You can jump directly to a name beginning with specific

characters by pressing the appropriate key (e.g. press 5

to jump to names beginning with J, K or L).

2 Location Sorts the personal data in memory location number.

Phonebook (M4)

Making a call or creating a message from the phonebook list

☛Highlight a desired personal data to display the stored numbers or Email addresses in

the help area ➔ Use and to display the other stored phone numbers or Email

addresses, if any, in the help area.

☛ to make a phone call to the displayed phone number, or SK1 to send a new message

to the phone number or Email address.

Copying and moving personal data

☛ 4 1 and the appropriate key for the desired directory, or until the required

directory is displayed ➔ Highlight the required personal data/list of data ➔ 3 to

copy or 4 to move.

☛For copying, 1 to copy the highlighted personal data entry or 2 to copy the selected

personal data entries in the current list.

☛Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number

or Voice mail number).

2If you copy or move from the phonebook (Phone), the Origin number screen will be displayed to

choose which phone number to copy or move.

2When copying the selected personal data entries (Package copy) from the phonebook (Phone), you

can copy only the first or all the numbers in each entry.

☛Key in the desired location number ➔ .

2If you copy or move to the phonebook (Phone), the Number type screen will be displayed to choose

the phone number type.

Personal data Options menu

☛ 4 1 and the appropriate key for the desired directory, or until the required

directory is displayed.

8 Location Searches for the personal data by the location number.

☛Key in the desired location number ➔ SK1 to display the Phonebook

list screen with the selected personal data highlighted.

9 Show Displays phonebook information.

1Summary Displays the summary of phonebook contents.

2 Voice tag list Displays the phonebook entry names with the voice

recognition tags recorded.

0 Send via

Bluetooth Sends the currently highlighted personal data to another device through

Bluetooth (p.76 “Bluetooth Object Push” ).

Add desktop

icon Creates a desktop icon of the highlighted personal data.

Phonebook list Options menu

54 Phonebook (M4)

☛Highlight the required data ➔ ➔ Highlight the required field ➔ (p.50 “Editing

an existing personal data” and p.53 “Copying and moving personal data” ).

Voice mail (M417)

Voice mail function enables you to forward received calls to the Voice mail centre, and the

caller can leave voice messages in your voice mail mailbox. You may be notified by an icon on

the standby screen if the caller leaves a voice message.

,Contact your service provider for details on your voice mail number.

Setting the Voice mail number

☛ 4 1 7 ➔ Highlight the required line ➔ twice ➔ ➔ key in the voice mail

number ➔ ➔ SK1 to save the change.

Forwarding a call to the Voice mail centre

☛Set the voice mail centre number (“Setting the Voice mail number”) ➔ Set up Call

diversion (p.54 “Setting the Voice mail number” ). When you receive a call set to be

diverted, the call will be diverted to the voice mail centre.

Retrieving a Voice mail

2This function is available when the Voice mail number has been set.

☛ 4 1 7 ➔ Highlight the required line (p.24 “ALS setup” )➔ .

2You can also retrieve a voice mail by pressing and holding 1 from the standby screen.

Personal data Options menu

1Call Calls the highlighted phone number.

2 Create message Creates a new message to the highlighted phone number or

Email address.

3 Send via Bluetooth Sends the selected personal data to another device through

Bluetooth.

4Edit Edits the selected personal data.

5Copy Copies the selected phone number(s)/Email address(es).

☛Press the appropriate key for the desired destination ➔ Key

in the desired location number ➔ .

6Move Moves the currently highlighted personal data.

☛Press the appropriate key for the desired destination ➔ Key

in the desired location number ➔ .

7 Delete current Deletes the selected personal data.

8 Add desktop icon Creates a desktop icon of the selected personal data.

Camera (M5)

Camera function enables you to take pictures or record videos and save them as Joint

Photographic Expert Group (JPEG) files and 3rd Generation Partnership Project (3GPP) files

respectively. You can enjoy the picture and video files in many ways: send them attached to

an MMS or mail, set a picture file as the wallpaper for your phone, etc.

Notes on using the camera

Handling the Camera

,The camera of your phone is manufactured using high-precision technology.

However, there may be dots or lines on the screen that appear darker or brighter

than the others. Note also that when you are shooting or recording in dimly-lit

places, the amount of noise (such as red and blue dots or horizontal lines) may

increase noticeably.

,Be careful not to apply force to the lens when closing your phone. This could

damage the lens.

2Fingerprints or grease on the lens can result in focusing problems or dark images. Wipe the lens

clean with a soft cloth before use.

2The image quality may be degraded after your phone has been left for a long period in a warm place.

2Exposing the camera to direct sunlight for a long period could discolour the camera’s internal colour

filter and cause discoloured images.

2Camera mode is automatically cancelled if none of the phone’s keys are pressed for 3 minutes or

longer.

Precautions when taking pictures/recording videos

2You cannot switch the camera’s shutter sound off. The shutter makes a clicking sound when you

take a picture or start/end a video recording, even when the phone is in Meeting mode.

2Avoid camera shake. Moving the phone when you take a picture will result in a blurred image. Hold

the camera firmly to keep it still when you take a picture, or use the auto timer to take the shot.

2As there is a slight delay from the time you press or Side up until the picture is actually taken,

do not move the camera until you hear the shutter sound.

2If taking a picture with not enough light, try to hold the phone still as much as possible, and for a

longer period of time after the shutter sound: the shutter speed may be slower in a darker

environment.

2Note that if you attempt to shoot directly into a strong light source, such as the sun, another bright

light or the high reflecting target with strong light, the image may contain washed-out white highlights

or be disrupted.

2While recording, be careful not to cover the mouthpiece of your phone as it is used as the

microphone to record sound along with the video.

2Images and videos shot or recorded on your phone cannot be used in ways that infringe copyright

laws without the consent of the copyright holder, unless intended only for personal use. Note that

some restrictions apply to the photographing of stage performances, entertainments and exhibits,

even when intended purely for personal use.

56 Camera (M5)

2Users are also asked to note that the transfer of images protected under copyright laws is only

permissible within the restrictions imposed by those copyright laws.

,Be considerate of other people’s privacy when you take a picture or record a video

using the camera of your phone and send it to others.

Taking a picture/recording a video (M51/M52)

,To record a video, keep your phone open at all time. Unlike taking a picture, you

cannot record a video while the phone is closed.

2The LED lights in green while in camera/video mode, and lights in red when the picture is taken or while

recording video.

2To create a desktop icon of the camera or video recorder function on the standby screen, 5 ➔

Highlight Camera or Video ➔ SK1.

Taking a picture

☛To activate the camera function, press and hold Side up or 5 1.

☛To take a picture, or Side up.

☛ to save the picture in My data.

Recording a video

☛To activate the video recorder function, press and hold Side up then SK1, or 5 2.

☛To start recording, or Side up.

☛To stop recording, or Side up. (After the set video file size is reached, the recording

automatically stops.)

☛ to save the video in My data.

2Before taking a picture or recording a video, you can switch the camera/video mode by pressing

SK1. This use of SK1, however, is invalid if the self-timer function is activated.

2Be careful not to cover the mouthpiece of your phone while recording, as it is used as the

microphone to record sound along with the video.

2After taking a picture or recording a video, you can replay the video (by pressing SK1) (p.59 “Videos

(M61)”) or send the picture (by pressing SK1)/video (by pressing SK2) attached to a message.

2You can discard the taken picture by pressing SK2 or the recorded video by pressing or CLR.

2The default file name saved in the folder is the date, month, year and sequence number. When you

take pictures in burst mode, the saved files will be named by the default file names plus a

consecutive two-digit number at the end.

2If a call comes in while you are checking or saving a picture/video, storage is cancelled. If this

occurs, the next time you select camera function a message appears to say that you have a picture/

video that was not stored, allowing you to check and store the picture/video.

2Depending on the photo size, there may be parts not seen on the full screen view finder display in

the saved picture.

Operations when taking a picture or recording a video

☛To zoom in and out, ▲ or ▼.

☛To control the brightness, or .

☛To turn on/off the camera view finder on the full screen, #.

Camera (M5)

Options menu (before taking a picture/recording a video)

Columns C and V show the menu numbers for the Camera Options menu and the Video

recorder Options menu respectively.

C V Options menu (before taking a picture/recording a video) (Sheet 1 of 2)

1- Single mode/

Burst mode Switches the shooting mode to Single/Burst mode (serial

shooting).

21 Shoot

environment Changes the camera settings to suit the environment.

32 Effect Applies special effect.

4-Photo size Sets the picture size.

2You cannot use the Zoom function for VGA and SXGA, and you can

select 1x to 2x magnification for Wallpaper and CIF, 1x to 4x

magnification for QCIF and 1x to 5x magnification for Sub-QCIF.

2You can use the Frame and Burst mode functions for Sub-QCIF, QCIF

and Wallpaper.

2You cannot use the Full screen function for Sub-QCIF and QCIF.

2If you select Wallpaper, CIF, VGA or SXGA, the picture on the camera

view finder screen will be displayed as a smaller picture than the actual

size. Also on the camera view finder screen, the picture size before

shooting differs from the size after shooting.

-3 Screen size Sets the video screen size.

-4 Video file size Sets the video file size.

5- Image quality Sets the image quality.

-5Quality Sets the video quality.

6-Frame Selects whether to use a frame when taking pictures, and sets the

desired frame with which a picture will be taken.

76 Self timer/Self

timer cancel Activates or deactivates the self-timer function.

8- Sound settings Selects the Shutter sound and Self timer sound.

-7 Self timer

sound Selects the self timer sound.

9-Pictures Opens Pictures in My data.

-8Videos Opens Videos in My data.

58 Camera (M5)

Options menu (after taking a picture/recording a video)

Columns C and V show the menu numbers for the Camera Options menu and the Video

recorder Options menu respectively.

09 Other settings Add desktop

icon Creates a desktop icon of the camera/video

function on the standby screen.

Automatic save Selects whether to save taken pictures

automatically or not.

Save in Selects the folder (preset or created) where the

taken picture/video will be saved.

Brightness Changes the brightness.

09 Other settings Zoom Changes the zoom magnification.

Thumbnail view Selects whether to display the pictures taken in

the Burst mode as thumbnails or slides.

Video recorder/

Camera Activates the video/camera function.

Flicker control Selects 50Hz, 60Hz or Auto to prevent flickers

when taking a picture under a fluorescent light.

- Full screen Turns the Full screen on or off.

C V Options menu (after taking a picture/recording a video)

1- Save current Saves the currently displayed picture in the folder selected as

Save in setting.

2In Burst mode, only the highlighted picture is saved.

2- Save all Saves all pictures taken in Burst mode.

-1 Save Saves the currently displayed video.

32 Create message Creates a new message with the file attached.

-3 Set as ring tone Sets the video as the ringtone.

44 Set as wallpaper Sets the picture/video as the main-display wallpaper.

5- Thumbnail view Selects whether to display the pictures taken in the Burst mode as

thumbnails or slides.

-5 Full screen Selects whether to enlarge the replay screen size.

2You cannot use the Full screen function for QCIF.

6- Automatic save Selects whether to save taken pictures automatically or not.

-6View detail Displays detailed information on the selected video.

C V Options menu (before taking a picture/recording a video) (Sheet 2 of 2)

My data (M6)

Using My data, you can playback sound and MP3 files, or display pictures and videos

downloaded from the Internet or captured with the camera function of your phone.

Videos (M61)

In the following section, how to playback video files (videos) stored in your phone is described.

You can either record videos using your phone, download them from the Internet, receive them

attached to messages. There are two pre-set folders: My Movies and Download (p.66 “Music

player (M81)”.

Replaying the video files

☛▼ 1 or 6 1 ➔ Highlight a folder ➔ ➔ Highlight a video file you wish to replay

➔ ➔ The video file will be replayed (p.7 for icons).

2When the flat view function is activated, the list of folders is not displayed. The list of all the stored

video files is displayed.

2If you wish to move to another hierarchy folder, use and .

2Pressing # on the video preview screen will enlarge the replay screen size, and pressing # again will

return the screen size to normal for Sub-QCIF only.

Operations while replaying video

☛To stop, SK2.

☛To pause, SK1 ➔ While pausing, SK1 again to restart and continue the replay.

☛To fast forward/rewind / ➔ / again to cancel fast forwarding/

rewinding and continue the replay.

☛To enlarge the replay screen size, # for Sub-QCIF only.

☛To adjust the volume, Side keys.

☛To display the previous/next file, ▲ or ▼.

2You cannot fast forward, rewind or enlarge the screen for video files with only sound but no image.

Sounds (M62)

In the following section, how to playback sound files stored in your phone is described. There

are three pre-set folders: Download, Preset and Voice memo.

77 Save in Selects the folder (preset or created) where the picture/video will

be saved. The specified folder will be protected.

8-Pictures Opens Pictures in My data.

-8Videos Opens Videos in My data.

C V Options menu (after taking a picture/recording a video)

60 My data (M6)

Selecting and playing sound

☛▼ 2 or 6 2 ➔ Highlight a folder ➔ ➔ Highlight a sound file you wish to replay

➔ .

2When the flat view function is activated, the list of folders is not displayed. The list of all the stored

sounds files is displayed.

2If you wish to move to another hierarchy folder, use and .

Operations while playing sound

☛To stop, SK2.

☛To adjust the volume, Side keys.

☛To replay the previous/next file, ▲ or ▼.

Pictures (M63)

The Pictures function allows you to display images and animations, which were obtained with

the camera function of your phone, received as a file attached to MMS messages, or

downloaded from the Internet. The images can also be edited using this function. From the

Pictures function you can also attach images and animations to messages you compose.

There are five pre-set folders: Photo, Download, Preset, Frame, and Stamp.

Displaying the Pictures view screen

☛▼ 3 or 6 3 ➔ Highlight a folder ➔ ➔ Highlight an image file you wish to

display ➔ .

☛To display the previous/next image file, ▲ or ▼.

2When the flat view function is activated, the list of folders is not displayed. The list of all the stored

image file is displayed.

2If you wish to move to another hierarchy folder while the Thumbnail view is turned off, use and

Cutting the image

☛Highlight or display the image file you wish to edit ➔ 1 3 ➔ Select the image size

➔ A frame indicating the cut area appears on the preview screen.

☛Move the frame position ➔ ➔ SK1 if the image is favorable.

2When you select Free, a cross indicator appears on the preview screen. Move it to the point to start

a frame and to confirm the position. Then, expand the frame into the required size and to

confirm.

Reducing the image size

☛Highlight or display the image file you wish to edit ➔ 1 4 ➔ Select the image size

➔ SK1 if the image is favorable.

Rotating the image

☛Highlight or display the image file you wish to edit ➔ 1 5 ➔ SK1 to rotate the

image 90 degrees clockwise.

☛Keep pressing SK1 until the image is at the required angle ➔ to confirm.

My data (M6)

Decorating the image with stamps

☛Highlight or display the image file you wish to edit ➔ 1 6.

☛To apply a marker stamp, 1 ➔ Highlight the required stamp ➔ ➔ The marker

stamp position is displayed in centre.

2If you wish to preview the highlighted stamp, SK1. To display the previous/next stamp, ▲ or ▼.

☛To apply a text stamp, 2 ➔ Key in the text ➔ ➔ The text stamp position is

displayed in centre.

☛Move the stamp position ➔ to confirm ➔ The stamp preview is displayed again.

Repeat applying if necessary, or to select another stamp.

☛SK1 when finished applying the stamp. (The stamp preview will not be applied this

time.)

Adding a frame to the image

☛Highlight or display the image file you wish to edit ➔ 1 7 ➔ Highlight a frame ➔

to preview the resulting image ➔ Scroll through the various frames by ▲ and ▼ ➔

to confirm.

Saving the edited image

☛After any editing, SK1 or to save the edited image ➔ Select the Save Quality (SK1

to check the expected size of the image).

☛Edit the name (if required) ➔ .

Printing an image using a printer

You can print an Exif format image file by connecting your phone to a PictBridge compatible

printer using a USB cable.

2There may be PictBridge compatible printers that cannot be connected to your phone.

2Refer to the operation manual of the printer for details on the printing.

2For some printers, an image file name including characters other than alphanumeric characters (e.g.

accentuated characters) may cause an error when printing.

☛▼ 3 or 6 3 ➔ Highlight a folder ➔ ➔ Highlight an image file you wish to print

➔ 2 4.

2“Print via USB” may be displayed in gray and unavailable, depending on the image file.

☛Connect your phone and the printer with the USB cable ➔ Prepare the printer ready for

printing, referring to its manual.

☛Check the print detail screen displayed.

☛To print as seen on the detail screen, SK1.

☛To edit the print detail and then print, on the print detail screen to display the

Options menu ➔ Edit the detail using the Options menu ➔ SK1.

2The Options menu may change depending on the connected printer.

62 My data (M6)

2If any interruption or error occurs, or the printing is not completed normally, pull out the USB cable

and start again from the first step.

2If you want to print multiple images on one sheet, set both the settings for Number of prints and N-

up on Layout screen under Layout detail. For example, 4 for Number of prints and 2 for N-up will

print 2 sheets with 2 half-sized images per sheet.

MP3 (M64)

In the following section, the procedures to display and play your MP3 files are described. There

is one pre-set folder: Download (p.66 “Music player (M81)”).

Selecting and playing an MP3 file

☛▼ 4 or 6 4 ➔ Highlight a folder ➔ ➔ Highlight the MP3 file you want to play

➔ .

2When the flat view function is activated, the list of folders is not displayed. The list of all the stored

MP3 files is displayed.

Operations while playing an MP3 file

☛To stop, SK2.

☛To adjust the volume, Side keys.

☛To replay the previous/next file, ▲ or ▼.

File selector Options menu

☛Display the Videos/Sounds/Pictures/MP3 list screen ➔ Highlight a file ➔ .

Print via USB Options menu

1 Number of prints Sets the number of prints to output.

2 Layout detail Selects the paper size, paper type and layout to print the image file.

3 Print quality Selects the required quality of printing.

4 File name Selects whether or not to print the file name on the paper.

5Date Selects whether or not to print the date on the paper.

File Selector Options menu (Sheet 1 of 3)

1Edit item 1 Rename item Edits the user title or name of the selected file/folder.

2 Set protection Sets the protection settings of the selected folder or

file on/off.

3Cut Cuts the selected picture into Sub-QCIF (128x96),

QCIF (176x144), Wallpaper (176x220) or Free (not

available for SXGA).

4 Reduce Reduces the selected picture to fit within Sub-QCIF

(128x96), QCIF (176x144) or Wallpaper (176x220).

My data (M6)

1Edit item 5Rotate Rotates the selected picture (not available for

SXGA).

6 Stamp tool Adds a marker or text stamp on the selected picture

(not available for Sub-QCIF, QCIF and Wallpaper).

7Frame Sets a frame to the selected picture (not available

for Sub-QCIF, QCIF and Wallpaper).

2 Use item - Set as ring tone Sets the selected video or sound to be the ringer

tone.

- Set as wallpaper Sets the selected video or picture to be the main-dis-

play wallpaper.

- Send via

Bluetooth Sends the selected file through Bluetooth to other

devices or a cellphone.

- Set as SMS tone Sets the selected sound to be the SMS tone.

- Set as Mail tone Sets the selected sound to be the Mail tone.

- Add desktop

icon Creates a desktop icon for the selected picture on

the standby screen.

-Print via USB Prints the selected picture using a PictBridge printer

via USB cable (p.61).

3Create

message Creates a new message with the file attached (not available for the MP3).

4 Delete

item Deletes the selected file and folder.

5 Delete all Deletes all the files in the current list.

6 Copy item Copies the selected file or folder to the selected folder.

7 Copy all Copies all the files in the current list to the selected folder.

8Move Moves the selected file/folder or all the files in the current list to the selected

folder.

9Create

folder Creates a new folder under the current folder.

0Storage

detail Displays the current storage information of your phone memory.

View detail Displays the details of the selected folder or file.

2You can also display the details on the highlighted folder or file by pressing

without displaying the Options menu.

File Selector Options menu (Sheet 2 of 3)

64 Java™ (M7)

2Depending on the size of the data, file selector operation may take a long time.

2Neither protected data nor preset data and folders can be deleted or moved.

Java™ (M7)

You can download Java™ applications (games etc.) and run them on your phone.

Programs (M71)

How to run software

To run software (a Java™ application), perform the following.

☛ 7 1 or press and hold SK2 ➔ Highlight an application containing the software you

want to run ➔ .

2While the software is active, the Java™ operation icon is displayed (p.7 for icons).

2When you display the Java™ applications list screen for the first time after downloading a

program(s), it may take a while for your phone to verify the program(s). A message will be displayed

during this process, and you may activate the program(s) after it is completed.

,After downloading the software, always make sure that the downloaded program

is displayed in the Applications screen.

Java™ System menu

☛ 7 1 ➔ Highlight an application ➔ .

# Options 1 Sorting order Sorts the files by date or alphabetically.

2 Info column Sets whether to display the column on the list

screen, and the information to be shown there.

2You can also change the information on the column by

pressing # without displaying the Options menu.

3 Thumbnail view Displays the files as thumbnails (for only Pictures).

4 Flat view Displays the list of all the stored files regardless of

the folder hierarchy.

5 Save options Saves the current option settings.

6 Reset options Resets the option settings.

System menu

1 Description

setting Selects whether to display the information of the selected application.

2 Delete all Deletes all the applications.

3Storage

status Displays the status of Java™ applications currently stored in your phone.

4 Trace info. Displays the trace information.

File Selector Options menu (Sheet 3 of 3)

Java™ (M7)

Application menu

☛ 7 1 ➔ Highlight an application you want to run ➔ SK1.

Prog backlight (M72)

You can set the backlight mode of your phone.

☛ 7 2 ➔ 1 to set your phone to follow the normal backlight setting, or 2 to let the

backlight be controlled by the Java™ application.

2If you set your phone to follow the normal backlight setting, the current power save settings will be

active (p.27 “Power saving (M15)”).

2When the software is not running, the backlight operation depends on your phone’s backlight

settings.

5 About Displays the information of the Java™ system.

Application menu

1 Properties Displays the information of the selected software.

2 Upgrade Makes an enquiry on whether the selected software has an upgrade. If

there is, starts downloading the data.

3 Delete Deletes the selected software.

4Network

connection Permits/prohibits the selected software to connect to the network or

displays the confirmation message every time you start the selected

software.

5 Auto start

setting Enables or disables the automatic start of a complying Java™ applica-

tion.

System menu

66 Accessory (M8)

Accessory (M8)

Music player (M81)

This feature allows you to create a Playlist of video and MP3 files. You can add video or MP3

files saved in My data to the Playlist (p.59 “Videos (M61)”, p.62 “MP3 (M64)”) or change the

order of the video and MP3 files within the Playlist.

☛ 8 1 ➔ SK1 to play ➔ After playing, SK2 to stop.

☛To change the volume, Side keys.

☛To play the previous/next file, ▲ or ▼.

2When there are no video or MP3 files saved in the Playlist, the Playlist screen will be displayed

instead of the Music player screen.

2When you use a wired headset, you can start or stop playing by pressing the button on it, and play

the next file by pressing and holding it.

Music player Options menu

☛ 8 1 .

Calculator (M82)

You can perform addition, subtraction, multiplication and division with the calculator. It also has

a memory function. The calculator can display a result of up to 9 digits.

Music player Options menu

1 Playlist Displays a list of video and MP3 files in the order in which they are

played.

2You can save up to 30 files in the Playlist depending on the size of each file.

2The video or MP3 files that are deleted from Videos or MP3 of My data or invalid

files are displayed in gray and cannot be played.

☛ to display the Playlist Options menu, or SK1 to add a video or

MP3 file.

2 Play mode Normal: Plays all the video and MP3 files in order from top to bot-

tom of the Playlist once.

Repeat all: Plays all the video and MP3 files in the Playlist repeatedly.

Repeat one: Plays the selected video or MP3 file repeatedly.

3Equalizer for

MP3 Selects from Rock, Jazz, Pop and Off to obtain the desired tone. This set-

ting applies only to the MP3 files in the Playlist.

4 Add desktop

icon Creates a desktop icon of the Music player function on the standby

screen.

5 Message

interrupt Selects whether or not to stop playing video or MP3 files and notify you of

the receipt of a new message.

Accessory (M8)

☛ 8 2.

Calculator Key Assignment

For calculator function, the keys are assigned different functions. The following shows the key

assignment:

2Using the % function, you can calculate (100 + x) % of a figure (e.g. 200 + 5% = 210) and (100 - x)

% of a figure (e.g. 200 - 5% = 190).

Clock alarm (M83)

This feature enables you to switch the clock alarm function on/off and to set the time, repetition

and alarm tone.

Turning the alarm on/off

☛ 8 3.

☛When all settings are done, SK1 to save the setting.

2The selected melody will be played when the alarm occurs if the ringer is turned on based on the current

phone mode. If vibration is turned on, you will be notified of the alarm by vibration.

2Even if the phone has been switched off, the phone automatically switches itself on and sounds the

alarm or vibrates at the specified time.

2You can stop the alarm tone or vibration by pressing any key.

Key Operation Key Operation

Addition (+) Subtraction (–)

▲Multiplication (×)▼Division (÷)

Equals to (=) SK2 Memory Store/Memory Addition

SK1 Memory Recall/Memory Cancel

(Press twice) Percent (%)

Inversion (±) Exit calculator

Decimal Point (.) CLR Delete digit (if held, all clear)

Clock alarm setting

On/Off Turns on or off the alarm.

Set time Sets the time and am/pm (for 12 hour format) at which the alarm will sound.

Set alarm

tone Sets the melody to be played when the alarm occurs. (p.59 “Sounds (M62)”)

Alarm repeat Selects alarm repeat for once, daily or day of the week.

2You can select more than one day of the week at the same time.

Enter alarm

text Sets the message (e.g. Wake up!) which is displayed when the alarm occurs

(optional).

68 Accessory (M8)

Scheduler (M84)

Scheduler enables you to enter reminders and appointments for particular time and date.

Adding a new event

☛ 8 4 ➔ Highlight the day ➔ to display the day’s schedule list screen (if any)

➔ SK1.

☛When all settings are done, SK1 to save the setting.

2The selected melody will be played when the scheduled event occurs if the ringer is turned on based

on the current phone mode. If vibration is turned on, you will be notified of the event by vibration.

2If the phone has been switched off, the phone does not switch itself on to sound the reminder or vibrate

at the specified time.

2You can stop the reminder tone or vibration by pressing any key.

2If the event is a private event, the reminder will sound at the specified time but the entered description

will not be displayed. You are prompted to enter the security code to view the details of the private event.

Viewing the scheduled events

☛ 8 4 ➔ Highlight a day (SK1 to display the previous monthly/weekly view screen

or SK2 to display the next monthly/weekly view screen).

☛ to display the day’s schedule list screen (To display the previous/next day’s

schedule list screen, or ).

☛ to display the detail screen of the highlighted schedule.

Setting the reminder again

☛When the scheduler reminder is set off, or and SK2 to select the time to

remind again.

Scheduler setting

Event date/time Sets the date, time and am/pm (for 12 hour format) of the event.

Event end date/time Sets the date, time and am/pm (for 12 hour format) of the end of

event.

Description Sets the event description (optional).

Repeat Selects repeat for One time only, Daily, Weekly or Monthly.

Reminder Turns on or off the reminder.

Reminder time Selects the time to set off the reminder prior to the event start time.

Reminder tone Associates a reminder tone with an event (only when the Reminder

is turned on).

Private Sets the event as a private event.

Accessory (M8)

Scheduler Options menu

☛ 8 4 ➔ Highlight the day ➔ to display the day’s schedule list screen (if any)

➔ Highlight the required scheduled event ➔ .

ToDo list (M85)

This feature allows you to set up to 100 ToDo tasks that should be finished by a certain date.

You can choose to display either all ToDo tasks, or those just finished or unfinished. Each task

is identified by a description (of up to 256 characters) and its start/due date.

Adding a new ToDo task

☛ 8 5 ➔ Highlight the list ➔ ➔ SK1.

☛When all settings are done, SK1 to save the setting.

Scheduler Options menu

1 Add new Adds a new entry.

2Edit Edits the highlighted event.

3 Copy Copies the highlighted event.

4 Delete Deletes event(s).

5 Go to date Displays the selected date.

6 Monthly calendar/

Weekly calendar Switches between the weekly and monthly calendar.

2You can select Sunday or Monday to start the week from p.25 “Set start

day”.

7View summary Displays the number of used and available entries.

8 View events Displays the events.

2You are required to key in the security code to display the private events

or all events.

9 Send via

Bluetooth Sends the selected schedule through Bluetooth to other devices or

a cellphone (Not available during a call).

ToDo list setting

Start date Sets the date to start the ToDo task.

Due date Sets the date to end the ToDo task.

Description Sets the ToDo task description (e.g. Pay the rent).

Category Sets the category.

Priority Sets the priority.

Private Sets the ToDo task as private.

70 Accessory (M8)

When a ToDo task is completed

☛ 8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔ ➔

1 1, or SK2 to save the task as completed.

Viewing ToDo task details

☛ 8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔ ➔ To

view the details of the previous or next ToDo task in the list, or .

☛To edit the currently displayed task, SK1.

ToDo Options menu

☛To display the ToDo Options menu, 8 5 ➔ Highlight the list ➔ ➔ Highlight

the required ToDo task ➔ .

☛To display the ToDo detail Options menu, 8 5 ➔ Highlight the list ➔ ➔

Highlight the required ToDo task ➔ ➔ .

Column L shows the ToDo options menu, and column D shows the ToDo detail Options menu.

Notepad (M86)

Notepad function allows you to record and store a note as a text file.

Creating a new memo (M861)

☛ 8 6 1 ➔ Key in text ➔ to save the entry as a text file. The first few words are

displayed on the text list screen.

L D ToDo Options menu

14 Add new Adds a ToDo task (p.69 “Adding a new ToDo task”).

–1 Status Changes the completion status of the highlighted ToDo task.

22Edit Edits the highlighted ToDo task (p.69 “Adding a new ToDo task”).

3– Delete Deletes ToDo task(s).

–3 Delete current Deletes the current ToDo task.

4– Display filter Sets the type(s) of ToDo tasks to be displayed by selecting the

desired filter option.

5–Sort list Displays a list of ToDo tasks rearranged according to the selected

sort key.

6–View summary Displays the number of Incomplete and Completed tasks and how

many more tasks can be created.

75 Send via

Bluetooth Sends the selected ToDo task through Bluetooth to other devices

or a cellphone (Not available during a call).

Accessory (M8)

Displaying a memo (M862)

☛ 8 6 2 ➔ Highlight a file ➔ SK1 to preview, or to edit.

Notepad Options menu

☛ 8 6 2 ➔ Highlight a file ➔ .

Voice memo (M87)

Voice memo function allows you to record up to 60 seconds of sound/voice, using your phone’s

microphone (p.59 “Sounds (M62)”).

Notepad Options menu

1Edit item Rename item: Edits the user title or name of the selected file/folder.

Set protection: Sets the protection settings of the selected folder or

file on/off.

2 Use item Add desktop icon: Creates a desktop icon of the selected file on

the standby screen.

Send via Bluetooth:Sends the selected file through Bluetooth to

other devices or a cellphone (Not available dur-

ing a call).

3 Create message Creates a new message with the highlighted text (note).

4 Delete item Deletes the selected file or folder if it is unprotected.

5 Delete all Deletes all the notes unprotected from the list.

6 Copy item Copies the selected note.

7 Copy all Copies all the notes.

8Move Moves the selected note or all the notes in the current folder to a

folder.

9 Create folder Creates a new folder under the current folder.

0 Storage detail Displays the current storage information of your phone memory.

View detail Displays the detail of the selected file.

# Options Sorting order: Sorts the files by date or alphabetically.

Info column: Sets whether to display the column on the list

screen, and the information to be shown there.

Flat view: Displays the list of all the stored files regardless of

the folder hierarchy.

Save options: Saves the current option settings.

Reset options: Resets the option settings.

72 Accessory (M8)

Recording/playing voice memo or setting speaker

☛ 8 7.

Currency (M88)

Currency function allows you to convert an amount of money in one currency to another.

Converting currency

☛ 8 8.

Resetting the currencies

☛ 8 8 and SK1.

Bluetooth (M89)

☛ 8 9 (p.73 “Bluetooth (M89)”).

Synchronization (M80)

Synchronization function allows you to synchronize data between your phone and your PC.

When your phone is connected to your PC via a USB cable, you can synchronize phonebook,

scheduler or ToDo list data.

2Data should comply with vCard 2.1/vCalendar 1.0 specification.

Voice memo setting

1Record Records a voice memo.

☛SK1 to start recording (p.17 “Recording a call”).

☛SK2 to finish recording and save the data as a file even before the

recording is completed.

2Play Plays a voice memo or recorded call.

☛Highlight a voice memo ➔ to start playing and SK2 to stop

playing.

3 Speaker setting Selects between Speaker and Earpiece to play the voice memo.

Currency setting

From Sets the source currency code.

To Sets the destination currency code.

Exchange rate Sets the exchange rate.

☛To change the exchange rate, CLR to delete the displayed exchange

rate and key in the required number (for decimal point, SK1) ➔ .

Amount Sets the amount of money to convert (for decimal point, SK1).

Bluetooth (M89)

2You cannot synchronize the phonebook data stored in the SIM card.

☛Connect your phone with your PC via a USB cable ➔ Activate the software on PC side

and prepare for synchronization (for details, refer to the manuals of the software).

☛ 8 0 ➔ Select the data type (Phonebook, Scheduler or ToDo list) ➔ SK1 or

1 to start synchronization.

Bluetooth (M89)

Bluetooth function provides the following services:

•Dial-up service - You can use your phone as a modem.

•Headset/hands-free service - You can make/receive a call using a Bluetooth headset or

hands-free kit.

•Object push service - You can send or receive the data (from Phonebook/Scheduler/

ToDo list/Notepad/My data (Videos/Sounds/Pictures/MP3))

between your phone and other Bluetooth devices (p.76

“Bluetooth Object Push”).

•File transfer service - You can use your phone as a server while other Bluetooth devices

function as a client. This enables the user to browse your phone

from other Bluetooth devices (p.77 “Bluetooth File Transfer”).

2The list of the Bluetooth accessories recommended for N500iS is available on NEC France’s website:

http://www.nec.fr

2This phone is compliant with Bluetooth Specification 1.2.

2When using Bluetooth devices, always refer to their operation manual.

2Depending on the connection status, a Bluetooth device may not function correctly. In such a case, retry

operation from the device side, or switch your phone off and on.

2There may be Bluetooth devices that cannot be connected to your phone.

2You cannot connect to multiple Bluetooth devices at the same time.

Guide to using Bluetooth

•Using headset/hands-free/modem for the first time:

☛See p.74 “Pairing Bluetooth device” ➔ p.74 “Connecting Bluetooth device”

➔ p.75 “Using Bluetooth headset/hands-free kit” or p.76 “Using your phone as

Bluetooth modem”

•Using an already paired headset/hands-free/modem:

☛See p.74 “Connecting Bluetooth device”

➔ p.75 “Using Bluetooth headset/hands-free kit” or p.76 “Using your phone as

Bluetooth modem”

•Using Object push:

☛See p.76 “Bluetooth Object Push”

•Using File transfer:

☛See p.77 “Bluetooth File Transfer”

74 Bluetooth (M89)

Bluetooth setting

☛ 8 9 1.

Pairing Bluetooth device

☛ 8 9 1 ➔ 2 ➔ 1 to search other Bluetooth devices or 2 to be searched by other

Bluetooth devices.

☛If the device is found, the list of found Bluetooth devices will be displayed.

☛Highlight the device from the list ➔ ➔ Input passcode of the found Bluetooth

device.

2When pairing, you will be asked to enter a passcode specified by the Bluetooth device to your phone

and the device. If no passcode is specified by the device, enter the same arbitrary number to your

phone and the device. A passcode is a number from 4 to 16 digits.

☛If pairing succeeds, your phone automatically connects with the paired device.

Connecting Bluetooth device

☛Pair the Bluetooth device and your phone beforehand (p.74 “Pairing Bluetooth device”).

☛If pairing succeeds, your phone automatically connects with the paired device.

Bluetooth setting

1 Bluetooth

On/

Bluetooth Off

Activates or deactivates Bluetooth function.

2If you switch the phone off while Bluetooth On is set, the next time you switch

on, the phone will be in Bluetooth On status again.

2If your phone is in Bluetooth On status, it will accelerate the battery

consumption.

2Pair new

device Registers the external Bluetooth devices.

1 Search

device Searches for the nearby active Bluetooth devices.

2Wait for

connect Standby your phone to wait for other devices to

search for it.

2Other Bluetooth devices can only detect your phone

while your phone is displaying Wait for connect screen.

3 Device list Displays and edits the list of paired devices.

4 My phone Displays the terminal information of your phone.

☛ to display the Options menu.

Rename: Edits the terminal name of your phone (Not available

during Bluetooth communication).

5 Active device Displays the information on the device in connection.

6 Disconnect Ends the Bluetooth connection in progress.

Bluetooth (M89)

☛Alternatively, you can manually connects with the device from the Device list.

☛ 8 9 1 ➔ 3 to display the Device list screen ➔ Highlight the device from the list ➔

SK1 or .

Device list Option menu

☛ 8 9 1 ➔ 3 ➔ .

Device list icons

Using Bluetooth device

,While using the Bluetooth device, the following icons will be displayed in the status

bar area of your phone

2To use the Bluetooth headset/hands-free kit or Bluetooth modem, you must perform the Bluetooth

pairing with the external device beforehand. For details, refer to the operation manual of the device.

Using Bluetooth headset/hands-free kit

☛ 8 9 1 ➔ 3 to display the Device list screen ➔ Highlight the headset/hands-free

kit in the list ➔ SK1 or .

☛To answer the incoming call, press the button on the headset/hands-free kit.

☛To switch the headset/hands-free kit call to your handset call during a call, 5.

☛To end the call, or end from the headset/hands-free kit.

2If both a wired headset and Bluetooth headset are connected with your phone at the same time, the

wired headset will work partially (only its button will work).

Device list Option menu

1 Rename Edits the name of the highlighted device.

2 Protect/Un-protect Protects or unprotects the highlighted device.

3 Delete device Deletes the highlighted device.

4 Delete all devices Deletes all the devices listed.

5View detail Displays detailed information on the highlighted device.

Not registered Phone

Connected with your phone Audio (a headset or handsfree device)

Other than an audio, PC, or phone PC

Protected

Bluetooth On Bluetooth active

76 Bluetooth (M89)

2For some Bluetooth devices, the voice recall function may be activated when a paired headset/

hands-free kit is turned on (p.15 “Voice recall”).

Using your phone as Bluetooth modem

2For details of dial-up connection settings, consult your Internet service provider.

☛ 8 9 1 ➔ 1 to toggle to Bluetooth On to activate Bluetooth ➔ Perform dial-up

connection by your PC.

☛To end the dial-up connection, disconnect from the PC application or pressing 8

9 1 6.

Bluetooth Object Push

You can send/receive the data from Phonebook/Scheduler/ToDo list/Notepad/My data

(Videos/Sounds/Pictures/MP3) between other Bluetooth devices.

2The maximum data size for the Object push service is 20 MB for MP3, 2 MB for videos, and 1 MB or

less for other files depending on the file type. Any files too large will be displayed in gray and not be

available.

2While sending or receiving data via Bluetooth, your phone is automatically placed out of service, so

phone call, message and i-mode access are disabled.

Procedures to send data

Phonebook entry (M413...)

2You can only send Name, Home, Mobile, Work, Fax, 2 Email addresses and 2 pieces of descriptive

information.

2Your phone sends data according to the vCard 2.1 specification.

☛To display the phonebook (Phone), (for required number of times) or 4 1 3

➔ Highlight a phonebook entry.

☛ 0 or 3.

Video/Sound/Picture/MP3 (M6...)

☛ 6 1 for Videos, 6 2 for Sounds, 6 3 for Pictures or 6 4 for MP3

➔ Highlight a folder ➔ ➔ Highlight a file.

☛ 2 3 for Videos/Pictures, 2 4 for Sounds or 2 1 for MP3.

Schedule entry (M84...)

☛ 8 4 ➔ Highlight a date ➔ ➔ Highlight a schedule entry ➔ ➔ 9.

ToDo entry (M85...)

☛ 8 5 ➔ Highlight Public, Private or All ➔ ➔ Highlight a ToDo entry ➔ 7.

Notepad (M862...)

☛ 8 6 2 ➔ Highlight a note ➔ 2 and 2.

Sending data

☛If your phone has not previously had access to other Bluetooth devices through

Bluetooth object push or file transfer service, after selecting Send via Bluetooth, the

Bluetooth (M89)

phone will start searching other Bluetooth devices ➔ If the device is found, the list of

found Bluetooth devices will be displayed ➔ Highlight the device from the list ➔ ➔

The phone starts connecting to the device. If the device accepts the connection, the

data will be sent.

☛If your phone has already had access to other Bluetooth devices through Bluetooth

object push or file transfer service, after selecting Send via Bluetooth, the screen is

displayed asking to send data to the last Bluetooth device the phone had accessed to

➔ SK1 to send data, SK2 to search other Bluetooth devices.

Receiving data

☛ 8 9 2 to set your phone to receive the data from other Bluetooth device.

☛Start sending data from the other end ➔ If the connection is established, the screen

appears asking to accept the data ➔ SK1 to accept, SK2 to reject.

☛Once the transmission completes, your phone automatically judges the type of received

data and saves the data accordingly.

2If your phone does not have enough space to store the received data, a message will be displayed

indicating lack of space. In such a case, delete unnecessary data and try again.

Bluetooth File Transfer

Using Bluetooth connection, you can browse your phone from other Bluetooth devices and

transfer data.

This function provides the following services:

•See the file/folder list in your phone.

•Send/receive the file/folder to/from your phone.

•Delete the file/folder from your phone.

•Create a folder in your phone.

☛ 8 9 2 ➔ The Waiting for data screen is displayed.

☛Browse your phone from other Bluetooth device.

2While using File transfer service to receive the data from other Bluetooth devices, your phone can only

accept the data for Notepad or My data (Videos, Sounds, Pictures, MP3).

2The connection from other Bluetooth devices is accepted only when the Waiting for data screen is

displayed.

2While using File transfer service, your phone is automatically placed out of service, so phone call,

message and i-mode access are disabled.

78 Index

Index

Numerics

3GPP.........................55

4-way navigation key .......3

AC adapter..................11

Accepting an incoming call..

Accessories and options...2

Accessory...................66

ADN...........................49

Alarm volume...............26

ALS ...........................24

Animation....................60

Any key answer............24

AoC...........................18

Auto answer ................26

Auto redial...................19

Bar calls......................28

Basic calls & phone use..13

Battery charging ...........11

Battery level icons...........5

Bluetooth ....................73

Calculator....................66

Call diversion...............19

Call lists......................18

Call options .................17

Call transfer.................16

Call waiting..................19

Camera ......................55

Taking a picture.......56

CB.............................35

CLI ............................51

Clock................... 24, 25

Clock alarm................. 67

Clock selection ............ 27

Clock/Event display ...... 27

Colour style................. 27

Connecting Bluetooth.... 74

Currency .................... 72

Date.......................... 24

Date format................. 24

Demo scroll................. 27

Desktop icons.............. 23

Dialled calls list............ 18

Download................... 36

Earphone setting.......... 26

Earphone type............. 25

Emergency calls........... 14

Ending a call ............... 13

External-display........... 27

Extract data ................ 33

Failed auto-redial numbers.

Fast dialling ................ 14

FDN.................... 29, 49

File transfer service ...... 73

Flicker control.............. 58

Fold answer................ 24

Frame........................ 61

Frequency band........... 21

General care...................i

Greetings.................... 26

Groups....................... 52

GSM............................ 6

Hands-free kit.............. 73

Headset................ 25, 73

Highlight mode............. 35

Holding a call............... 16

Icons ..................... 5, 75

i-mode........................ 36

i-mode menu screen.41

i-mode operations.... 36

i-mode screen......... 41

i-mode menu screen...... 41

i-mode operations......... 36

i-mode screen.............. 41

i-mode Settings............ 41

Inbox ......................... 30

Incoming call No........... 27

International dialling codes..

Java™ ....................... 64

JPEG......................... 55

Key tone..................... 26

Keypad shortcuts............ 4

Language ................... 25

Last call duration.......... 18

Last number redial........ 14

LCD............................. 3

Index

LED........................... 25

Line ID....................... 20

Low battery alarm......... 12

Mail screen ................. 45

Mail tone .................... 26

Mail tone volume.......... 26

Main menu.................... 8

Main menu style........... 27

Main-display................ 26

Making basic calls ........ 13

Meeting mode.............. 25

Menu functions .............. 8

Menu shortcuts selection.. 1

Message .................... 30

Message screen menu... 30

MFi ........................... 48

Missed calls list............ 18

MMS messages ........... 30

Multi-party calls............ 16

Music player................ 66

Mute.......................... 16

My data...................... 59

MP3 ..................... 62

Pictures................. 60

Sounds ................. 59

Videos .................. 59

Network selection......... 20

Normal mode............... 25

Normal text (ABC) input.22

Notepad ..................... 70

Number type................ 53

Numeric input.............. 22

Object push service ...... 73

One-touch dial............. 14

Origin number..............53

Own phone number display.

Pairing Bluetooth..........74

Parts and functions .........3

Phone lock..................28

Phone modes...............25

Phonebook..................49

PIM ...........................28

PIN activate.................28

PIN code...............12, 28

PIN2 code...................28

Pocket mode................25

Power saving...............27

Preparing the phone........9

PUK...........................28

Reading a message.......30

Received calls list .........18

Receiving an incoming call..

Recording a call............17

Rejecting an incoming call ..

Reset settings..............29

Ring silencer................24

Ringer........................25

Ringer volume..............26

Roaming.....................20

Scheduler ...................68

Scratchpad number.......17

SDN...........................50

Security......................27

Security code...............27

Service tone ................26

Settings ......................24

Shortcuts selection..........8

Side key lock................24

SIM card .......................9

SIM card insertion ...........9

SIM card removal..........10

SMS messages ............30

SMS tone....................26

SMS tone volume..........26

Speaker phone.............16

Stamp.........................61

Standby and talk times...12

Standby screen...............5

Starting a call ...............13

Start-up.......................12

Switching the phone off ..12

Switching the phone on ..12

Synchronization............72

T9 English text input ......21

Text entry....................21

Mode change..........21

Time...........................24

Time format .................24

Timezone....................24

ToDo list .....................69

Total calls duration ........18

Unsuccessful calls.........14

User’s manual conventions1

Vibrator.......................26

Video..........................55

View mode ..................33

Voice mail ...................54

Voice memo.................71

Voice recall..................15

80 Index

Voice volume...............24

Wallpaper....................26

Zoom .........................58

1_10306

N500iS Quick Manual

From the standby screen

■Making a call

1. Key in the phone number.

2. or to start a call.

■Ending a call

・To end a call, or briefly.

■Receiving a call

・ or to receive a call.

■Retrieving the voice mail

・From the standby screen, hold down 1

for about a second.

,“Select” means to highlight the

item and .

■Switching the phone on

・Hold down for about a second to

display the standby screen.

■Switching the phone off

・Hold down until the display shows

the switch off message.

・▲ ➔ Select the phone mode.

■Switching to Meeting mode

・Every time you press and hold ▲ from

the standby screen, the phone mode

switches between the meeting mode

and the previous mode.

■Adding a new data

1. ➔ ➔ Select the directory.

2. Enter name, phone number, and other

information ➔ .

■Displaying a personal data

1. until the directory is displayed.

2. Select the data.

■

Calling a number stored in phonebook

1. until the directory is displayed.

2. Select the personal data.

3. Highlight the phone number ➔ .

Key Press Press and hold

Main menu screen Sets/Cancels the side

key lock

Mail screen Inbox screen

i-mode menu screen Java™ application

screen

Phonebook list screen Message screen

▲Phone modes screen Sets/Cancels the

meeting mode

▼My data screen Voice recall

New SMS message

edit scree

Received calls list -

Dialled calls list -

Highlights a desktop icon

Access the homepage

Ends a call or returns

to the standby screen Power-off

Phonebook

Keypad Shortcuts

Cutting Line

Changing Phone Mode

Call

Voice Mail

Power On/Off

1. .

2. Enter message and address.

3. to send the message.

1. ➔ 2 ➔ 1.

2. Select from 1 to 4 ➔ Select media.

3. To add more media, 1 ➔ Repeat

step 2.

4. To add more slide, 7.

5. If you are finished, .

6. Enter address and subject.

7. To send the MMS, select Send.

■Taking a picture

1. 5 1 / press and hold Side up.

2. To take a picture, or Side up.

3. to save the picture.

■Recording a video

1. 5 2 / press and hold Side up ➔

2. To start recording, or Side up.

3. To stop recording, or Side up.

4. to save the video.

1. ➔ 1.

2. Select the To field ➔ Key in the

destination ➔ .

3. Select the Subject field ➔ Key in the

subject ➔ .

4. Select the Message field ➔ Key in the

message ➔ .

5. Select the Attachment field ➔ Select a

file.

6. To send the mail, select Send.

■First Usage: Pairing new device

➔

. Bluetooth

device search starts.

2. Select your headset from the list.

3. Enter Bluetooth headset passcode

(usually 0000 or 1234, otherwise check

related manual).

■

After first Usage: Using Bluetooth headset

Power on Bluetooth:

➔

Connect headset:

➔

3. Select the headset.

■

Answering a call from the Bluetooth headset

・While ringing, press the button on

Bluetooth headset.

■

Switching the call between headset and phone

・During a call, 5.

■Ending a call

・ or press the button on Bluetooth

headset.

Camera/Video

Creating a New SMS

Creating a New MMS

Creating a New Mail

Bluetooth

Cutting Line

NEC of America KMP6J1CH Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual Manual

NEC Corporation of America Single-Band PCS GSM/ EDGE Phone with Bluetooth Manual

Contents

Users Manual

Navigation menu

Namespaces

Views

Navigation