Nedap N V T325RRFMDID ASSY T325R RF+MD+RFID User Manual Manual UHF portion

N. V. Nederlandsche Apparatenfabriek NEDAP ASSY T325R RF+MD+RFID Manual UHF portion

Contents

Manual UHF portion

Lumen iL33 ADD-ON T325R RFID UPGRADECopyright © by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP.itemdaterevisiondsgndocumentQuick reference : ADD-ON T325R RFID UPGRADE: 28 August 2018 11:20 AM: CvdB: A.01: T986847-45.01: 9986847N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2, NL-7141 DC Groenlo (The Netherlands)Mail: support-retail@nedap.comlabel free zone> 100 cm (3.3 ft)> 100 cm (3.3 ft)1x | RFID coaxial cable1x | coaxial cable (short)2x | lter2x | connector RJ451x | switch cable2x | tie-wrap1x | antenna 12x | label 38x194x | screw M3x810x | screw M3x61x | antenna 21x | USB cable + core1x | reader RFID(3.5m / 11ft)1x | cover A1x | at cable 1x | coaxial cable (long)2x | cable tray1x | cover B2x | bracket1x | heatsink2x | degreaser2x | screw M4x25 4x | screw M3x12 2x | nylon washer2x | foam tape4x | double sided tape 2x | tape for covers1x | sync cable
remove covers111 Screw M3x10 (4x)mount the brackets43121 Renos side (important)2 Bracket (2x)3 Nylon washer (2x)4 Screw M4x25 (2x)mounting antenna 11 Coaxial cable (Short) - (You should hear “Click”)2 Coaxial cable (Long) - (You should hear “Click”)3 Switch cable4 Flat cable5 Fix with tie-wrap6 Renos side (important)7 Antenna 18 Screw M3x6 (4x)83126547contact-side
mounting antenna 21 Antenna 12 Flat cable3 Coaxial cable (Short)4 Coaxial cable (Short) - (You should hear “Click”)5 Renos side6 Antenna 27 Screw M3x6 (4x)123mounting cable tray1 Antenna 12 Antenna 23 Cable tray4 Coaxial cable (Long)5 Switch cable6 Foam tape (2x)425176~8mm1 2 1 2543Place double-sided tape (2x 2 pcs)1st - Switch cable2nd - Coaxial cable6Both sides (clean surface before)Clean surface.contact-side
Place covers (RFID)1 Place cable tray cover (Both sides)2 Tape black3 Cover A4 Cover B5 Screw M3x8 (Stainless steel) (4x)1243521st1st2nd3rd4th4thRemove paper layerClean surface inside before placing the cover.Torque max. 0.3Nmmake sure there are no visable cables
4Place RFID Reader1 Heatsink2 Screw M3x6 (2x)3 RFID Reader4 Screw M3x12 (4x)123Fix with tie-wrapMount switch and coaxial cable1 Coaxial cable2 Switch cable3 USB cable + core123
installation1 Gate 12 Gate 23 RFID coaxial cable 11ft4 Filter5 Ethernet cable cat5e (not included)6 Connect to customer network7 USB cable + core12do not bend coaxial cable434556RX sensors57744
place covers1 Screw M3x10 (4x)1replace label after installation11 Pull to see the label information (Two labels at the front side and two at the back side)2 Replace label with the correct REGION and MODEL name.251234status LEDs RFID Reader1 Blue On The RFID Reader is connected to the Renos rmwareBlinking The RFID Reader has received a command from the Renos rmwareO The RFID reader is not connected to the Renos rmware2 Yellow Blinking slow The rmware on the RFID Reader is runningO The rmware on the RFID reader is not running3 Red On There is an error with the RFID outputO There is no error with the RFID output4 Green On The RFID output is activeBlinking The reader is reading RFID labelsO The RFID output is not active 5 Green On The RFID reader is powered by the Renos unitO The RFID reader is not powered by the Renos unit1
FCC and IC Compliance statementThis device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Cet appareil se conforme aux normes CNR 210 exemptés de license du Industry Canada. L’opération est soumis aux deux conditions suivantes:(1) cet appareil ne doit causer aucune interférence, et(2) cet appareil doit accepter n’importe quelle interférence, y inclus interférence qui peut causer uneopération non pas voulu de cet appareil. Les changements ou modications n’ayant pas été expressément approuvés par la partie responsable de laconformité peuvent faire perdre à l’utilisateur l’autorisation de faire fonctionner le matériel.FCC and IC Radiation Exposure StatementThis equipment complies with FCC and Canadian radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5 cm between the radiator and a human body for normal operation. Personal standing permanently next to the antenna frame must keep a distance of at least 30 cm. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme a CNR-102 limites énoncées pour un environne- ment non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 5 cm entre le radiateur et un corps humain pour un fonctionnement normal. Les personnes se tenant en permanence à côté du cadre de l’antenne doivent respecter une distance minimale de 30 cm.. This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de Classe B est con-forme à la norme Canadienne ICES-003.FCC Information to the userNote: This equipment has been tested and found to comply with the limits for a class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver.NOTE: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To ensure compliance with FCC regulations, use only the shielded interface cables provided with the product, or additional specified components or accessories that can be used with the installation of the product.Declaration of ConformityHereby, De N.V. Nederlandsche Apparatenfabriek “Nedap” declares that the radio equipment type ASSY T325R RF is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://portal.nedapretail.com/User manualThe complete instruction manual can be found at https://portal.nedapretail.com/DisclaimerNedap intends to make this manual accurate and complete. However, Nedap does not warrant that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. Nedap disclaims any liability for damage to property or personal injury resulting, in whole or in part, from improper installation, modication, use or misuse of its products. The information contained in this document is subject to change without notice.

Navigation menu