Nedap N V T325RRFMDID ASSY T325R RF+MD+RFID User Manual Manual UHF portion

Download:
Mirror Download [FCC.gov]
Document ID	4038816
Application ID	X+PWKC+Gr97Hkxm4qcKGDw==
Document Description	Manual UHF portion
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	176.35kB (2204345 bits)
Date Submitted	2018-10-11 00:00:00
Date Available	2018-10-17 00:00:00
Creation Date	2018-08-29 09:07:02
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-10-16 09:07:34
Document Title	Manual UHF portion
Document Creator	Adobe InDesign CC 13.1 (Windows)

Lumen iL33
ADD-ON T325R RFID UPGRADE
2x | bracket
1x | antenna 1
1x | heatsink
10x | screw M3x6
2x | tie-wrap
2x | cable tray
1x | switch cable
2x | connector RJ45
1x | sync cable
2x | filter
1x | antenna 2
4x | screw M3x8
4x | double sided tape
1x | flat cable
1x | RFID coaxial cable
1x | cover A
2x | screw M4x25
2x | tape for covers
1x | USB cable + core
1x | reader RFID
1x | cover B
4x | screw M3x12
2x | nylon washer
2x | label 38x19
2x | foam tape
1x | coaxial cable (short)
1x | coaxial cable (long)
2x | degreaser
(3.5m / 11ft)
label free zone
> 100 cm (3.3 ft)
> 100 cm (3.3 ft)
Quick reference : ADD-ON T325R RFID UPGRADE
N.V. Nederlandsche Apparatenfabriek “Nedap”
dsgn
: CvdB
Parallelweg 2, NL-7141 DC Groenlo (The Netherlands)
date
: 28 August 2018 11:20 AM
Mail: support-retail@nedap.com
item
: 9986847
Copyright © by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed
document : T986847-45.01
in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP.
revision
: A.01
remove covers
Screw M3x10 (4x)
mount the brackets
Renos side (important)
Bracket (2x)
Nylon washer (2x)
Screw M4x25 (2x)
mounting antenna 1
contact-side
Coaxial cable (Short) - (You should hear “Click”)
Coaxial cable (Long) - (You should hear “Click”)
Switch cable
Flat cable
Fix with tie-wrap
Renos side (important)
Antenna 1
Screw M3x6 (4x)
mounting antenna 2
contact-side
Antenna 1
Flat cable
Coaxial cable (Short)
Coaxial cable (Short) - (You should hear “Click”)
Renos side
Antenna 2
Screw M3x6 (4x)
mounting cable tray
Clean surface.
Place double-sided
~8mm
tape (2x 2 pcs)
1st - Switch cable
2nd - Coaxial cable
Antenna 1
Antenna 2
Cable tray
Coaxial cable (Long)
Switch cable
Foam tape (2x)
Both sides (clean surface before)
Place covers (RFID)
Remove
paper layer
Clean surface inside
before placing the cover.
1st
4th
1st
3rd
make sure there are
2nd
Place cable tray cover (Both sides)
Tape black
Cover A
Cover B
Screw M3x8 (Stainless steel) (4x)
no visable cables
4th
Torque max. 0.3Nm
Place RFID Reader
Heatsink
Screw M3x6 (2x)
RFID Reader
Screw M3x12 (4x)
Mount switch and coaxial cable
Coaxial cable
Switch cable
USB cable + core
Fix with tie-wrap
installation
RX sensors
Gate 1
Gate 2
RFID coaxial cable 11ft
Filter
Ethernet cable cat5e (not included)
Connect to customer network
USB cable + core
do not bend coaxial cable
place covers
Screw M3x10 (4x)
replace label after installation
Pull to see the label information (Two labels at the front side and two at the back side)
Replace label with the correct REGION and MODEL name.
status LEDs RFID Reader
Blue
Yellow
Red
Green
Green
On		
The RFID Reader is connected to the Renos firmware
Blinking		
The RFID Reader has received a command from the Renos firmware
Off		
The RFID reader is not connected to the Renos firmware
Blinking slow
The firmware on the RFID Reader is running
Off		
The firmware on the RFID reader is not running
On		
There is an error with the RFID output
Off		
There is no error with the RFID output
On		
The RFID output is active
Blinking		
The reader is reading RFID labels
Off		
The RFID output is not active
On		
The RFID reader is powered by the Renos unit
Off		
The RFID reader is not powered by the Renos unit
Disclaimer
Nedap intends to make this manual accurate and complete. However, Nedap does not warrant that the information contained herein covers all details, conditions
or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. Nedap disclaims any liability for damage
to property or personal injury resulting, in whole or in part, from improper installation, modification, use or misuse of its products. The information contained in
this document is subject to change without notice.
FCC and IC Compliance statement
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Cet appareil se conforme aux normes CNR 210 exemptés de license du Industry Canada. L’opération est soumis aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interférence, et
(2) cet appareil doit accepter n’importe quelle interférence, y inclus interférence qui peut causer une
opération non pas voulu de cet appareil. Les changements ou modifications n’ayant pas été expressément approuvés par la partie responsable de la
conformité peuvent faire perdre à l’utilisateur l’autorisation de faire fonctionner le matériel.
FCC and IC Radiation Exposure Statement
This equipment complies with FCC and Canadian radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 5 cm between the radiator and a human body for normal operation. Personal standing permanently next to the
antenna frame must keep a distance of at least 30 cm. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Cet équipement est conforme a CNR-102 limites énoncées pour un environne- ment non contrôlé. Cet équipement doit être installé et utilisé avec une distance
minimale de 5 cm entre le radiateur et un corps humain pour un fonctionnement normal. Les personnes se tenant en permanence à côté du cadre de l’antenne
doivent respecter une distance minimale de 30 cm.. This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de Classe B est
con-forme à la norme Canadienne ICES-003.
FCC Information to the user
Note: This equipment has been tested and found to comply with the limits for a class B digital devices, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which
can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver.
NOTE: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To
ensure compliance with FCC regulations, use only the shielded interface cables provided with the product, or additional specified components or accessories
that can be used with the installation of the product.
Declaration of Conformity
Hereby, De N.V. Nederlandsche Apparatenfabriek “Nedap” declares that the radio equipment type ASSY T325R RF is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://portal.nedapretail.com/
User manual
The complete instruction manual can be found at https://portal.nedapretail.com/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2018:08:29 09:07:02+02:00
Creator                         : Adobe InDesign CC 13.1 (Windows)
Modify Date                     : 2018:10:16 09:07:34+02:00
Has XFA                         : No
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 91.163280, 2018/06/22-11:31:03
Metadata Date                   : 2018:10:16 09:07:34+02:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:b4b8eb44-a858-4052-bf87-96320e6bad16
Original Document ID            : xmp.did:FD7F1174072068119457DD866944A140
Document ID                     : xmp.id:0d906001-e055-0644-87ce-d56e41439090
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:f57ea1ac-6f2f-5345-9ad4-68061087b93f
Derived From Document ID        : xmp.did:6A305B24E303E211A740EE653DA3658D
Derived From Original Document ID: xmp.did:FD7F1174072068119457DD866944A140
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2018:08:29 09:07:02+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 8

EXIF Metadata provided by EXIF.tools