New Centurion Solutions NCS04010910 HANDHELD SECURITY DEVICE User Manual Project 623

Download:
Mirror Download [FCC.gov]
Document ID	1450794
Application ID	4z2kGK3eM9btJUIyXwEYRQ==
Document Description	Installation Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.63kB (882865 bits)
Date Submitted	2011-04-19 00:00:00
Date Available	2011-04-19 00:00:00
Creation Date	2011-03-16 12:24:40
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-03-16 12:24:40
Document Title	Project 623
Document Creator	Microsoft® Office Word 2007
Document Author:	Scott Elliott

Elliott Tech, LLC
OREP Installation Manual
OREP
New Centurion Solutions
Project Number: 776
Reference: 776-91-07-REV-OREP_INSTALLATION_MANUAL.docx
Original Document: March 1, 2011
Revision A: March 16, 2011
Prepared for:
New Centurion Solutions, Inc.
Greg Williams
3011 Spring Garden St.
Suite E
Greensboro, NC 27403
(336) 617-5410
GWilliams@newcenturionsolutions.com
Prepared by:
Elliott Tech, LLC
346 Raleigh Street
Holly Springs, NC 27540
(919) 342-6899
(888) 631-1795 Fax
s.elliott@elliotttech.com
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
Revision Page
Rev
Description
FCC Notification
Section
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
Contents
1.
Equipment List ................................................................................................................................. 4
2.
Installation Instructions .................................................................................................................. 6
3.
FCC Notification ............................................................................................................................ 11
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
1.
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
EQUIPMENT LIST
A. OREP assembly (1)
B. Hardware to attach to OREP Bracket (4)
C. Solar Bracket & Hardware (1)
D. Bracket Hardware (2)
E. Solar Panel (1)
F.
G. TN-Male to N-Male Pigtail 2 ft (2)
H. Lightning Surge Protector (1)
I.
J.
Tripod Base (1)
K. Hardware to attach tripod to base (3)
L.
Mast (1)
M. Antenna 3db (1)
N. Antenna Bracket (1)
Mounting Base-Treated Plywood (1)
Panel Hardware (2)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
O. U-Bolt and mast attachment hardware (1)
P. OREP Bracket (1)
Q. U-Bolts, nuts, washers (2 sets)
R. TN-Male to N-Male Pigtail 2 ft (2)
S.
T. 12V Battery (1)
Battery Box (1)
U. Battery Restraining Strap (2)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
2.
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
INSTALLATION INSTRUCTIONS
To begin, check the parts available against the equipment list, identifying any missing parts. If all
parts are accounted for, proceed to the instructions below to begin installing the OREP.
Step 1: Identify the Mounting Base-Treated Plywood (I). Place the
plywood on the ground laying flat. Identify the Tripod Base (J), open its
legs until fully extended, and center it on the plywood. Mark the points for
the drill holes with a pencil and set
aside
the base. Drill 1/8” holes where they
are
marked on the plywood. Identify the
Hardware to attach to OREP Bracket
(B).
Push the screws up through the drilled holes from the bottom
of the
plywood, and align the tripod base with the screws. Push the
screws
through the holes in the tripod base and secure with a washer
and nut
(from Hardware to attach to OREP Bracket (B)) on each
screw.
Make sure hardware is secure before proceeding to the next step.
Step 2: Place Mast (L) down through the center of the
Tripod Base (J). Tighten screws at the top and center of
the Tripod Base (J) to secure the Mast (L).
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
Step 3: Place Antenna 3db (M) through hole in Antenna Bracket (N) and
secure at base of antenna.
Step 4: Identify the U-Bolt and mast attachment hardware (O). Secure
the antenna-bracket assembly to the mast by sliding a u-bolt through each
hole in the bracket (from previous step) and around the mast. Secure the
u-bolt on the mast with two nuts (included with u-bolt).
Step 5: Place the OREP assembly (A) on the OREP Bracket (P) with the legs facing away. Identify
the Hardware to attach to OREP Bracket (B). Insert four screws into the OREP enclosure holes and
push through the holes in the bracket. Secure the OREP to the bracket by attaching four nuts to
the screws on the backside of the bracket.
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
Step 6: Note the OREP bracket has two curved half-moon shaped areas on the back of it. These
areas allow the bracket
to seat flushly on the mast. Identify the UBolts, nuts, washers
(Q), and while holding the OREP-bracket
assembly on the mast,
place one u-bolt around the mast and feed
through the matching
holes in the OREP bracket. Secure this u-bolt
with two nuts and two
washers. Repeat the process for the other ubolt. Ensure both ubolts are tightened snugly.
Step 7: Take TN-Male to N-Male Pigtail cable (U) and attach to OREP (A) and secure. Take open
end and attach to Light Surge (H) and secure.
Take open end Light
Surge (H) and 2nd cable (U) and secure
together. Take open
end Light Surge (U) and secure to bottom of
antenna (M).
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
Step 8: Take Inmate 23 4#20 Female Panel Receptacle (G) and secure to OREP as shown.
Step 9: Next, place the Solar Bracket (C) approx. 8-10” below the
Repeater Bracket. Make sure the bracket is securely attached with two
U Bolts (D).
Step 10: Now attach the accompanying part of the Solar Bracket
to the part already attached to the mast. Angle it at a 45 degree
angle and secure tightly. Use the pictures above to confirm proper
placement.
Step 11: Now attach the Solar Panel to the bracket. Confirm that the panel is angled properly
and securely fastened. Use the pictures above for reference.
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
OREP Installation Manual
Step 12: Take open end Receptacle (G)
Attach bare wire to battery (T)
negative side.
Step 13: Place assembled battery (T)
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
and strip wire cover to show bare wire.
White wire to positive side and black wire to
inside battery box (S)
Step 14: Set under middle of tripod (J) on mounting base (I)
Complete OREP Assembly
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
10
OREP Installation Manual
3.
776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx
FCC NOTIFICATION
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 11
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Project 623
Author                          : Scott Elliott
Subject                         : 623_SRS_Acroprint
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2011:03:16 12:24:40
Modify Date                     : 2011:03:16 12:24:40
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools