Norsat 5200-KUAA-ID GLOBETREKKER KU-BAND SATELLITE TERMINAL User Manual GT Manual Rev 2 FCC

Download:
Mirror Download [FCC.gov]
Document ID	710999
Application ID	yUsfwKnlzGZIz2H6A6EFWQ==
Document Description	USERS MANUAL 7 OF 8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	236.83kB (2960350 bits)
Date Submitted	2006-09-29 00:00:00
Date Available	2006-10-03 00:00:00
Creation Date	2006-08-24 12:34:36
Producing Software	PDFlib 3.03 (Win32)
Document Lastmod	0000-00-00 00:00:00
Document Title	Microsoft Word - GT Manual Rev 2 FCC.doc
Document Creator	Win2PDF 3.10.1 http://www.win2pdf.com
Document Author:	mcurkovic

Replace protective plastic caps to the ends
of the flexible waveguide.
Detaching the LNB from the Feed Assembly
Detach the LNB from the top of the feed
assembly using the thumb screws.
Replace protective plastic cap to the end of
the LNB.
136
Disassembling the Boom Arm and Feed Assembly
Loosen and remove the upper boom arm
segment.
Replace protective plastic caps to the feed
assembly. Rotate the polarization so that it
is pointing directly down.
Loosen and remove the lower boom arm
segment from the main antenna assembly.
137
Disassembling the Main Antenna Unit
Loosen the latches from each of the five antenna segments.
Detach Petal 6 (top right segment).
Detach Petal 5 (top left segment).
Detach Petal 4 (top center segment).
138
5
Detach Petal 3 (bottom right segment).
Detach Petal 2 (bottom left segment).
Unfasten the elevation assembly unit with
the thumb screws.
139
8
Remove the elevation assembly unit from
the azimuth plate and unscrew elevation
assembly rod from the elevation top axle
assembly.
Unfasten the left and right back plate
supports of the main antenna unit using the
thumb screws.
10 Remove the right and left back plate
supports of the main antenna assembly
from the azimuth plate.
11 Pack the main antenna unit into the
backpack case.
140
Folding the Legs and Leg Supports into the Baseband
Turn the handle on the folding legs to move
the feet to the up position.
To quickly adjust the leg, press the button
in.
Undo the leg support thumb knob.
141
4
Remove feet from the end of the legs and
from the back of the baseband unit.
Screw feet onto the side of the baseband
unit (two feet per side).
Fold the leg into the baseband unit.
Repeat steps 1 to 6 the instructions for the other legs and supports.
142
Repacking the GLOBETrekker Antenna/RF Backpack Bottom
Replace flexible
waveguide into the
bottom of Antenna/RF
backpack.
Replace the elevation
assembly into the
bottom of the
Antenna/RF
backpack.
Adjust main antenna
segment supports so
that the flat end rests
parallel to the main
antenna segment.
143
4
Replace the main
antenna segment into
the bottom of
Antenna/RF
backpack (reflector
face up).
Repackaging the GLOBETrekker Antenna/RF Backpack Top
Replace the Lower
Boom Arm into the
top of Antenna/RF
backpack.
Replace LNBs into
the top of Antenna/RF
backpack.
Replace the Upper
Boom Arm and Feed
Assembly into the top
of Antenna/RF
backpack.
Replace the GPS Antenna and Compass into the top of Antenna/RF backpack.
Replace the RF load into the top of the Antenna/RF backpack.
144
7
Replace antenna
segment 5 into the
top of Antenna/RF
backpack (back side
facing up).
Replace antenna
segment 4 on top of
segment 5 into the
top of Antenna/RF
backpack (back side
facing up).
145

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Title                           : Microsoft Word - GT Manual Rev 2 FCC.doc
Creator                         : Win2PDF 3.10.1 http://www.win2pdf.com
Author                          : mcurkovic
Create Date                     : 2006:08:24 12:34:36-07:00
Producer                        : PDFlib 3.03 (Win32)
Page Count                      : 10

EXIF Metadata provided by EXIF.tools