Nortek Security and Control 00115 Wireless glass break detector User Manual 235512A GB00Z 1 Iris Instructions indd
Nortek Security & Control LLC Wireless glass break detector 235512A GB00Z 1 Iris Instructions indd
Contents
- 1. Instructions1
- 2. Instruction2
Instruction2
PRINTER’S INSTRUCTIONS: INSTR,INSTL,GLASS BREAK,ZW - P/N: 235512 X11 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 11.000” X 8.500” - FOLDING: Z-FOLD, FINISH WITH LOGO SHOWING - SCALE: 1-1 ITEM #0000000 MODEL #GB00Z-1 Utilitech & UT Design® is a registered trademark of LF, LLC. All rights reserved. GLASS BREAK DETECTOR Questions? Call customer service at 1-000-000-0000, 5:00 a.m. - 4:30 p.m., PST, Monday-Friday PACKAGE CONTENTS x1 Detector x1 Mounting Plate HARDWARE CONTENTS Note: Hardware shown actual size. AA CC x3 Mounting Screw BB x3 Screw Anchor PARING INSTRUCTIONS 1. Install two Batteries (CC) into the Detector (A). Observe polarity! Please read and understand this entire manual before attempting to assemble, operate, or install the product. WARNING CC 3X 2. Bring detector within 10 feet of the system. Set system to add glass break detector device, when instructed, press the button on Detector (A) three times to pair with the system. SPECIFICATIONS Operating Temperature: 32° to 120° F (0° to 49° C) Operating Relative Humidity: 5 to 95%, non-condensing Operating Frequency: 908.42 MHz Sensor Type: Single microphone, dual-stage Glass Thickness: 1/8” (3.2 mm) to 1/4” (6.4 mm) HELPFUL TIPS MOUNTING THE DETECTOR 1. Choose a location on the ceiling or on an adjacent or opposite wall within 12 feet of the glass to be monitored. Use the Mounting Plate (B) as a template to mark the three mounting holes. 2. Drill three 3/16” pilot holes and insert Screw Anchors (BB). Attach Mounting Plate (B) with three Mounting Screws (AA). Danger of explosion if batteries are installed incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. PREPARATION Before beginning installation of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Estimated Installation Time: 15 minutes. Tools required for installation (not included): Pencil, Phillips screwdriver, drill, 3/16” drill bit 1. Follow the system’s instructions to select Test Mode. When instructed, press button on Detector (A) three times. CC x2 CR123A Battery SAFETY INFORMATION xxxxx DETECTOR TESTING • The minimum size for all glass types is 11” x 11” (28 cm x 28 cm) square. Glass must be framed, in a wall of the room or mounted in a barrier of 36” (91 cm) minimum width. • The Detector will not lock onto the Mounting Plate unless both CR123A batteries are installed. ® • The Detector sends Z-Wave signals to the system. ® Z-Wave is a registered trademark of Sigma Designs Inc. and/or its subsidiaries. WARRANTY Lowe’s Utilitech Warranty Here?? BB AA 3. Match alignment marks on Detector (A) and Mounting Plate (B). Turn Detector (A) clockwise to lock onto Mounting Plate (B). REGULATORY NOTICE Changes or modifications to the device may void FCC compliance. Les modifications apportées à l’appareil peuvent annuler la conformité Industrie Canada 235512 X11 Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Copyright © 2014 Linear LLC Create Date : 2013:12:05 08:10:44-08:00 Modify Date : 2013:12:06 14:29:23-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2013:12:06 14:29:23-08:00 Producer : Acrobat Distiller 10.1.8 (Windows) Keywords : Format : application/pdf Title : 235512A GB00Z-1 Iris Instructions.indd Creator : Copyright © 2014 Linear LLC Document ID : uuid:4dd4aaa0-ebe0-4127-967f-91ddc5b1e2a0 Instance ID : uuid:bf03080a-5000-4ce0-a19f-c4d9fe02252d Startup Profile : Print Page Count : 1EXIF Metadata provided by EXIF.tools