Ohsung Electronics URCMX980 RF REMOTE CONTROLLER User Manual I

Download:
Mirror Download [FCC.gov]
Document ID	858380
Application ID	/U9TFbHswn+d4BX9NngsHQ==
Document Description	USERS MANUAL 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.13kB (814086 bits)
Date Submitted	2007-10-23 00:00:00
Date Available	2007-10-25 00:00:00
Creation Date	2007-10-23 15:16:49
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-10-23 15:16:56
Document Title	Microsoft Word - I_User manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EMC CENTER

MX-980 OWNERS MANUAL
Main Settings Menu
DISPLAY- Press this setting button to
adjust the screen and button backlighting. The longer your screen is lit, the
more frequently you’ll need to charge
the MX-980.
SOUND - Adjust the volume of the
sounds your MX-980 makes when you
press buttons.
SYSTEM - These settings are for service
use. For diagnostic purposes, an installer
can turn off the Pick Up sensor, display
remaining battery charge and erase all
programming permanently. Some of this
menu may have been disabled by your
installer as a safety measure.
INFORMATION - Adjust the time, date
or you can display the amount of memory available and the version number of
the firmware loaded into your MX-980.
Adjusting the Display
BACKLIGHT - Specify how long the
MX-980 screen should stay lit after you
press a button. You can select two different time out settings. One for when it
is hand held, another for when it is in
the charging base.
BRIGHT - Adjust the brightness of the
screen.
BUTTON LIGHT - Turn the backlighting
for all buttons on or off. When on, all
the buttons backlight so that you can
read their labels in total darkness.
Page 8
MX-980 OWNERS MANUAL
Sound Volume
Press this button
to lower the volume.
Press this button
to raise the volume.
Press this button
to save any
changes you’ve
made and return
to the Main
Setting menu.
Press this button
to cancel any
changes you’ve
made and return
to the Main
Setting menu.
System Settings Menu
POWER- Displays the current power
remaining and enables you to set the
level that triggers a warning when you
are using the MX-980.
PICKUP - The MX-980 normally turns
itself on when its angle is changed. This
can be disabled for diagnostic purposes.
FACTORY DEFAULT - WARNING!
This setting is for service use. Your
installer can erase all programming permanently, before downloading your
configuration back into the MX-980 via
his/her PC. This button may have been
disabled by your installer as a safety
measure.
Page 9
MX-980 OWNERS MANUAL
Information Menu
DATE- Press this button to set the date.
TIME - Press this button to set the time.
MEMORY - Press this button to display
the amount of memory available.
VERSION - Press this button to display
the version of the MX-980 firmware.
Setting Time
Press this button
to change from
AM to PM.
Each time you
press this button
the hour will
change.
Press this button
to turn daylight
savings time on.
Each time you
press this button
the minute will
change.
Press this button
to save any
changes you’ve
made and return
to the Main
Setting menu.
Press this button
to turn daylight
savings time off.
Press this button
to cancel any
changes you’ve
made and return
to the Main
Setting menu.
Page 10
MX-980 OWNERS MANUAL
USA Limited Warranty Statement
Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product
against defects in material or workmanship for a period of one (1) year
and as set forth below. Universal Remote Control will, at its sole
option, repair the product using new or comparable rebuilt parts, or
exchange the product for a comparable new or rebuilt product. In the
event of a defect, these are your exclusive remedies.
This Limited Warranty covers only the hardware components packaged with
the Product. It does not cover technical assistance for hardware or software
usage and it does not cover any software products whether or not contained
in the Product; any such software is provided "AS IS" unless expressly provided for in any enclosed software Limited Warranty.
To obtain warranty service, you must deliver the product, freight prepaid, in
its original packaging or packaging affording adequate protection to
Universal Remote Control at the address provided in the Owner's Manual. It
is your responsibility to backup any macro programming, artwork, software
or other materials that may have been programmed into your unit. It is likely
that such data, software, or other materials will be lost during service and
Universal Remote Control will not be responsible for any such damage or
loss. A dated purchase receipt, Bill of Sale, Installation Contract or other verifiable Proof of Purchase is required. For product support and other important information visit Universal Remote Control's website:
http://www.UniversalRemote.com
Or call the Universal Remote Control Customer Service Center
(914) 835-4484.
This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product
issues due to commercial use, acts of God, third-party installation, misuse,
limitations of technology, or modification of or to any part of the Universal
Remote Control product. This Limited Warranty does not cover Universal
Remote Control products sold as USED, AS IS, REFURBISHED, so-called "B
STOCK" or consumables (such as batteries). This Limited Warranty is invalid
if the factory-applied serial number has been altered or removed from the
product. This Limited Warranty is valid only in the United States of America.
This Limited Warranty specifically excludes products sold by unauthorized
resellers.
Page 11
MX-980 OWNERS MANUAL
Specifications
Microprocessor: ARM9 32bit 202MHz
LCD - 2.4” TFT (QVGA) 262,144 Colors
Memory - 64 Megabytes of SDRAM & 32 Megabytes of Nand Flash
Devices - Supports up to 255 Devices with text, less with heavy
graphics usage
Pages - Supports up to 255 Pages on each Device with text, less
with heavy graphics usage
Learning Capability - Standard frequencies (15kHz to 455kHz)
Macro Capability - Up to 255 steps each, however nesting is
allowed
IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz
Batteries: 1070mAh, 3.7 Volt Lithium Ion battery pack included
Battery Life: 120 minutes continuous use, 6000 minutes in standby
mode.
Weight: 7 oz. (with battery)
Size: 2.4” x 9.2 x 1”
Page 12
MX-980 OWNERS MANUAL
Information To The User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for
help.
Warning
Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment.
Page 13
MEMO
Page 14
MEMO
Page 15
MEMO
Page 16
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0036B Rev01

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2007:10:23 15:16:56-04:00
Create Date                     : 2007:10:23 15:16:49-04:00
Metadata Date                   : 2007:10:23 15:16:56-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - I_User manual.doc
Creator                         : EMC CENTER
Document ID                     : uuid:0151dba6-edb0-474b-8c59-b6b9b0ca3876
Instance ID                     : uuid:da7b2c27-c87a-4079-a0af-191fb1db54a1
Producer                        : Acrobat Distiller 6.0 (Windows)
Page Count                      : 10
Author                          : EMC CENTER

EXIF Metadata provided by EXIF.tools