Orbit Irrigation Product WT25 Smart WiFi Sprinkler Timer User Manual 57946 50 rH 3

Download:
Mirror Download [FCC.gov]
Document ID	3598045
Application ID	U4dXp95N39+se/3awqN/lg==
Document Description	Users Manual 57946-50 rH_3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.1kB (451288 bits)
Date Submitted	2017-10-10 00:00:00
Date Available	2017-10-11 00:00:00
Creation Date	2017-10-09 10:04:26
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-10-09 10:04:27
Document Title	Users Manual 57946-50 rH_3
Document Creator	Adobe InDesign CC 2017 (Macintosh)

Contents in the Box
Welcome to
The B-hyve™ App
WiFi Sprinkler Timer
Keys
Screwdriver
Quick Start Guide
SMART WIFI SPRINKLER TIMER
Quick
Start
Guide
Scan for full User Manual
bhyve.orbitonline.com
Install the B-hyve™ app on
your smart device
You will need a smart device to connect
the timer to Wi-Fi. After the timer is
paired, you can also use a computer to
adjust your timer.
Mounting Srews and Anchors
FCC and IC Statemen
Compatible with other B-hyve products
Déclaration de FCC et l’IC
This device complies with Part 15 of the FCC Rules and Industry
Canada license exempt RSS standards. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
FCC Warning: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device meets the FCC and IC requirements for RF exposure
in public or controlled environments. The end user is advised to
maintain a distance of 20 cm from the controller and any personnel
to ensure compliance with RF exposure regulations.
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil est conforme à la section 15 de la Règlementation
de la FCC et la norme RSS d’Industry Canada.
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne doit pas causer d’interférences nuisibles, et
(2) cet appareil doit tolérer toutes les interférences, dont les
interférences pouvant causer un fonctionnement non désiré.
Cet appareil numérique de classe B est conforme à la norme
canadienne ICES-003.
Remarque: cet appareil été testé et déclaré conforme aux
limites d’exposition pour les appareils numériques de classe
B, selon la section 15 de la Règlementation de la FCC. Ces
limites sont conçus pour fournir une protection raisonnable
contre les interférences nuisibles dans une installation
résidentielle. Cet appareil produit, utilise et peut émettre de
l’énergie radio fréquence et, si elle n’est pas installée et utilisée
conformément aux instructions, peut causer des interférences
nuisibles aux communications radio. Cependant, il n’est pas
garantie que des interférences ne se produisent pas dans une
installation particulière. Si cet appareil cause des interférences
gênantes à la réception d’un signal radio ou de télévision, ce
qui peut être déterminé en allumant et en éteignant l’appareil,
l’utilisateur peut corriger les interférences en suivants une des
mesures suivantes :
• Réorientez ou repositionnez l’antenne de réception.
• Augmentez la distance entre l’appareil et le récepteur.
• Branchez l’appareil dans une prise sur un circuit différent du
circuit sur lequel le récepteur est branché.
• Consulter le revendeur ou un technicien radio/TV
expérimenté pour obtenir de l’aide.
Cet appareil est conforme aux exigences de la FCC et de l’IC
concernant l’exposition aux ondes dans un environnement
public ou contrôlé. Il est conseillé à l’utilisateur final de
maintenir une distance de 20 cm du contrôleur pour assurer
la conformité aux réglementations d’exposition RF. Information
de conformité pour le Canada
Orbit ®
1.801.299.5555
orbitonline.com
DATE: 10/09/2017
DESIGNER: KM MARKETING: MS
Folded
Timer Connected Symbol
Note: There is a wizard in the app to
guide you through initial set up of your
sprinkler timer. In addition, there are
help icons throughout the app with
more information and useful tips.
Weather/Temp.
Battery Specifications
Timer requires a CR2032 Lithium battery
(included)
To remove, lift battery cover with a screwdriver
and remove battery with fingers.
Insert the new battery at an angle and press to
click the battery into place. The plus (+) sign on
the battery must face upwards.
WARNING: Risk of Fire, Explosion, and Electric
Shock. Replace battery with Hitachi Maxell Ltd,
Type CR2032 only. Use of a different battery
has the potential for a risk of fire, explosion, and
electric shock.
WARNING: Battery must be removed
from the timer before it is scrapped.
WARNING: The timer must be
disconnected from the supply mains
when removing the battery.
BATTERY WARNING: Chemical Burn Hazard.
Keep batteries away from children.
Running Status/Messaging
Stop Watering
Rain Delay
Next Zone
Calendar
Settings
Programs
Remote Control
or Home Button
This product contains a lithium coin cell battery. If
a new or used button/coin cell battery is swallowed
or enters the body, it can cause severe internal
burns and can lead to death in as little as two hours.
Always completely secure the battery compartment.
If the battery compartment does not close securely,
stop using the product, remove the battery, and
keep it away from children. If you think the battery
might have been swallowed or placed inside any
part of the body, seek immediate medical attention.
The battery should be disposed of properly and
kept away from children. Even used batteries may
cause injury.
Rated input:
Australia—240V AC 50/60Hz 0.15A | Europe—230V
AC 50/60Hz 0.15A | USA—120V AC 60Hz 0.15A
Max load:
AUS & EU—24V AC 1 Amp 50/60 Cycle | USA—24V
AC 750 mA 60Hz
Temperature Operating Range:
Operating: 32-158° F (0-70° C) | Storage & transport:
32-176° F (0-80° C)
Humidity Operating Range:
Operating: 0–80% | Storage & transport: 0–90%
Altitude:
6,500' (2,000 meters) IPX5 Rating
Installation Class II | Over Voltage Category II
Acts as a hub forother
B-hyve™ products
Help
If the app and the website don’t have what you’re
looking for, please call our technical support line
before returning this sprinkler timer to the store.
1-800-488-6156 or 1-801-299-5555
www.orbitonline.com | bhyve.orbitonline.com
Zone List
57946-50 rH
Dieline
Dims./
Callout
PMS
7405
PMS
Cool
Gray 10
Flat
ARTWORK №: 57946-50 rH
L: 000.000" W: 24.0"
SOFTWARE: Adobe Indesign CC
H: 6.0"
W: 6.0"
Specifications
H: 6.0"
Product
Coverage
Fold
PMS
0000
PMS
0000
Glue
PRINTERS ARE
REQUIRED TO MATCH
ALL SPECIFIED
PMS COLORS.
Additional Information
∙
∙
∙
∙
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit®.
Printed piece must meet
designated specifications
on this form.
© 2014 Orbit Inc.
This work is the property
of Orbit®, and cannot
be used, reproduced or
distributed in any way
without their express
permission.
Timer Installation
Connect Valve Wires
Select a location
Choose a location near power and
away from direct sunlight, if possible.
Make sure to leave room for the timer
door to open completely.
Prepare wire
Strip 1/2" (13 mm) of insulation from
each wire.
This location should also have a good
Wi-Fi signal. You can check this using a
smart phone. (Find a location that has a
minimum of two bars)
Minimum Signal
Connect wires
Attach one wire from each valve to
a “Common” (COM) wire and the
other wires to a numbered terminal
(only one wire per terminal.)
SENSOR
COM PUMP
2 3 4 5 6
Loosen Screw
Strip Wire
Push In
Keyhole
1/8" (3mm)
No. 8 Screw
Small hole—for running 5 or 7
strand wire straight into the box
Pre-formed
Mounting Holes
Wall
Bottom View
Knock-out for hardwired installations
1/2", 3/4" and 1" (13 mm, 20 mm and 25 mm)
knock-outs for larger systems with more wire bundles
Simple Controls
Plug in your Orbit® B-hyve™ timer
Once your B-hyve™ timer is plugged into the
power source, it will automatically look to
pair with your smart device. In the top left
corner of the timer screen the “Wi-Fi” icon
will begin a graduated blinking sequence.
This indicates that your timer is ready to pair
with a smart device.
Programming the timer
You can set your timer up with the app.
But, if you don’t have Wi-Fi or just want to
make an adjustment while you are outside,
you can do it at the timer. Timer changes
will be reflected in the app, and app
changes will be reflected at the timer.
It allows the gardener who left their phone
inside to run a manual cycle, or adjust
programming as needed and keep dirty
hands away from the phone.
Find Orbit_SmartHome_XXXX
in your Wi-Fi list
The B-hyve™ timer will create its own
network that will appear in your list of
available Wi-Fi connections on your smart
device. Connect to the Orbit Smart Home
network and then return to the Orbit®
B-hyve™ app.
Tighten Screw
Note: If replacing a timer, it is helpful
to take a photo of the wires before you
remove them from the old timer.
Mount the timer
Install a screw (included) into the
wall. Use the expanding anchors
(included) for plaster, masonry or
drywall installations. Hang the timer on
the installed screw using the keyhole
slot. Level the timer and use the
second screw in one of the preformed
mounting holes to secure the timer.
Timer Installation–Connecting to Wi-Fi
Note: We recommend you
consult an electrician for
hardwired installations.
Enter your Wi-Fi settings
After returning to the app, you will see a list
of available networks. Choose your network
and then enter the password for the network
to connect your timer to your Wi-Fi signal.
When connected, the Wi-Fi icon on the
timer will stop blinking and show solid lines.
Note: The app has help screens and video
to assist you with Wi-Fi connections,
programming, smart watering and other
general questions you may have.
Buttons
Function
Scroll up or down, left or right and
push to make a selection
FOR OPTIMUM TIMER
PERFORMANCE, CONNECT
TO WIFI TO RECEIVE THE
LATEST TIMER UPDATES.
CLEAR
To clear a setting
PROG ABC
To move to different programs: A, B, and C
BACK
To go back a step
RAIN DELAY
To pause operation for 1 to 32 days
due to rain or other factors

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01
Create Date                     : 2017:10:09 10:04:26-06:00
Metadata Date                   : 2017:10:09 10:04:27-06:00
Modify Date                     : 2017:10:09 10:04:27-06:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:bc2981ae-d527-7c4b-acab-e5e312ef2dc4
Original Document ID            : xmp.did:dae17286-843d-457a-ab36-94f207a1b885
Document ID                     : xmp.id:e5232416-d8a6-4906-a1e1-12f6ba24155c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:39dd87e2-6bf4-4fd1-88e7-346be93ba627
Derived From Document ID        : xmp.did:41d06ecd-371f-4bf3-9c42-e71f2f4b8920
Derived From Original Document ID: xmp.did:dae17286-843d-457a-ab36-94f207a1b885
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:10:09 10:04:26-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools