Planex Communications BT-06HS-T Bluetooth headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1254984
Application ID	fQvtwM/ABLUczn0ptqHqxQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.75kB (509389 bits)
Date Submitted	2010-03-21 00:00:00
Date Available	2010-03-21 00:00:00
Creation Date	2010-03-08 10:31:47
Producing Software	Corel PDF Engine Version 1.0.0.536
Document Lastmod	0000-00-00 00:00:00
Document Title	BT-06HS-T TELEC DOC 申請書面資料 .cdr
Document Creator	CorelDRAW 版本 12.0
Document Author:	user

User guide
- Stand-by mode------blue light flash once every 5 Sec.
- Connected mode---blue light flash two times every 5 Sec.
- Active call mode----blue light flash three times every 5 Sec.
BT-06HS-T
Bluetooth Headset
User Manual
Model: BT-06HS-T
FCC ID. : SJ9-BT-06HS-T
The salient insert
in the little hole
3. Turn on/ Turn off
Power on - blue light flashing.
Power off - red light flashing then off.
4. Pairing with your mobile phone
Inserted
Incompletely
-----
The ear tip must insert to ear bone completely.
Right-ear use
1.Before pairing, make sure your
headset is off.
2.Press the MFB key for at least
5 sec; the blue and red light
flashing alternately it means the
headset is in the “pairing mode".
3.Please ensure that your mobile
phone is provided the Bluetooth
Function, and activate the function.
Red
Left-ear use
2.This function depends on the
specification of your mobile phone.
7. Make a call.
12. Redial last number
Devices found
BT-06HS-T
-----
1. At least for 4 hours when first time charging,
2. When charging, the red light on; fully charged the light
will be off.
Double-Click
microphone toward jaw
4. "BT-06HS-T” will show on certain items in your mobile phone.
5. Key in pairing pin code "0000”press " yes" , the indicator
light will turn from the blue/red flashing status into blue
flashing, it means the pairing has been successful.
7.Now the headset has been in the "connected mode".
you may receive or dial the phone call.
2. Introduction of the product
To make a call, dial through your mobile phone.
8. Reject a call.
5. How to wear the headset
Choose the ear plug size
Choose the ear tip size
1.The headset should be under
"Connected mode". By double-click
the MFB key, after you hear a " DoDo " sound from the headset, then it
will redial again.
2.This function depends on the
specification of your mobile phone.
13. Volume control.
Talk key touch panel
(logo area)
Microphone
Ear tip
1.The headset should be under
"Connected mode", click the MFB
key; then you can make the " Voice
dialing " by the mobile phone's
operation instruction..
If you can't wear it firmly, use the ear hook as assist
10cm~1m
light indicator
11. Voice dialing
Click
blue
The pairing
distance
MFB /Volume down
-----
USB
Port
Charging Plug
Volume up
Touch 1 Sec
When you finish a call; touch the
Talk key 1 Sec. ----end the call.
It need to pair with your Bluetooth device, first time.
5 Sec
1. Charging the Headset
Ringing.....
1.When you have a incoming call
just “touch” the Talk key ,after you
hear the ring from the headset.
10. End a call.
Inserted
completely
Specification of the Headset
Bluetooth V2.1
Over 7 hrs.
Over 7 Days.
Within 90 ~120Mins.
10 meters(open space)
Handsfree / Headset .
0 ~ 55 'C
0% ~ 90% (non-concrete status)
5V DC, 00~240V AC adapter
-----
6. How to wear it firmly
Press the MFB key for about
3 Sec, to turn on and turn off.
Bluetooth Standard
Talktime
Standby time
Charging time
Operation range
Supported Bluetooth profiles
Operating temperature range
Storage temperature
Power Supply
Touch
2.You can also click MFB key to receiving a call
3 Sec
Made in Taiwan Brand Name:PCI
-----
Parallel
- low battery----red light flash.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONS IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
( 1 ) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
( 2 ) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFEERENCE THAT MAY UNDESIRED OPERATION.
9. Answer a call.
Cap the ear tip
-----
Touch 2 Sec
-----
You can adjust the headset volume
during a call.
Ringing.....
Charging Port
When you hear the in-coming
call rings from your headset;
touch the Talk key touch panel
(logo area)for 2 Sec, when you
hear the " Do Do" sound than
release it. ---Reject a call.
Hook point
Ear plug
Speaker
large one on headset already
Mute & un-mute
1.When during call press the “ Volume up & Down" key
simultaneously; you will hear a “ Do-lu-do-do" sound,
then your voice won't be heard.
2.Click the Volume up or Volume Down key again, you will
hear the " Beep " sound to un-mute the microphone.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.536
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : user
Title                           : BT-06HS-T TELEC DOC 申請書面資料 .cdr
Creator Tool                    : CorelDRAW 版本 12.0
Modify Date                     : 2010:03:15 09:42:07+08:00
Metadata Date                   : 2010:03:15 09:42:07+08:00
Document ID                     : uuid:2b490472-5a03-483a-b471-53b3361e6c44
Instance ID                     : uuid:789551eb-f1b0-42f6-adb3-e204156d4103
Has XFA                         : No
Page Count                      : 2
Create Date                     : D:20100308103147
Author                          : user

EXIF Metadata provided by EXIF.tools