Quanta Computer 9550015318 Mini-PCI Wireless LAN card in Notebook Computer User Manual Solo9550

Quanta Computer Inc Mini-PCI Wireless LAN card in Notebook Computer Solo9550

Manual Part 4

139Extending battery lifewww.gateway.comTo change the power scheme1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Power Options or Power Management icon, click view all Control Panel options.2Double-click the Power Options or Power Management icon. The Power Options Properties dialog box opens.3Select a power scheme from the Power Schemes list.- OR -Set the timers for System stand by, System hibernate, Turn off monitor, and Turn off hard disks, then save your custom power scheme by clicking Save As and typing a name for the scheme.4Save the changes by clicking OK.Solo9550.book Page 139 Tuesday, June 19, 2001 3:18 PM
140Chapter 9: Managing Powerwww.gateway.comTo change the alarm options:1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Power Options or Power Management icon, click view all Control Panel options.2Double-click the Power Options or Power Management icon. The Power Options Properties dialog box opens.3Click the Alarms tab.4Adjust the alarm settings, then save the changes by clicking OK.Solo9550.book Page 140 Tuesday, June 19, 2001 3:18 PM
141Extending battery lifewww.gateway.comTo change advanced power management settings: 1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Power Options or Power Management icon, click view all Control Panel options.2Double-click the Power Options or Power Management icon. The Power Options Properties dialog box opens.3Click the Advanced tab.4Select a power savings mode to be activated by the power button, then save the changes by clicking OK.Solo9550.book Page 141 Tuesday, June 19, 2001 3:18 PM
142Chapter 9: Managing Powerwww.gateway.comTo use Hibernate mode:1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Power Options or Power Management icon, click view all Control Panel options.2Double-click the Power Options or Power Management icon. The Power Options Properties dialog box opens.3Click the Hibernate tab.4Select the Enable hibernate support check box, then click Apply. Hibernate mode is now an option you can select on the Advanced tab and in the Shut Down menu.5To use Hibernate as a power savings mode, click the Advanced tab, select Hibernate as one of the advanced power settings, then save the changes by clicking OK.6To manually activate Hibernate mode, click Start, then select Shut Down, then Hibernate, then click OK.Solo9550.book Page 142 Tuesday, June 19, 2001 3:18 PM
143Extending battery lifewww.gateway.comChanging power settings in Windows NT In Windows NT, you can monitor the remaining battery charge and set low battery warnings.To monitor the remaining battery charge:1Double-click the battery icon or power cord icon on the taskbar. The APM for NT dialog box opens.2Click the Power Status tab. The current battery charge and estimated working time remaining appear.3Click OK.To set the low battery warning: 1Double-click the battery icon or power cord icon on the taskbar. The APM for NT dialog box opens.2Click the Settings tab, then select the Enable Low Battery Warning check box.3Click OK. When the battery charge is very low, you see a warning message.Solo9550.book Page 143 Tuesday, June 19, 2001 3:18 PM
144Chapter 9: Managing Powerwww.gateway.comChanging SpeedStep settingsThe processor installed in your notebook may use Intel® SpeedStep™ technology to conserve battery power. A SpeedStep-equipped processor can change its operating speed according to the power source. Your notebook’s default settings operate the processor at full speed while connected to AC power and at reduced speed (which uses less power) while using battery power.To change SpeedStep settings:1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Power Options or Power Management icon, click view all Control Panel options.2Double-click the Power Options or Power Management icon. The Power Options Properties dialog box opens.3Click the Intel SpeedStep technology tab.Solo9550.book Page 144 Tuesday, June 19, 2001 3:18 PM
145Extending battery lifewww.gateway.com4Change any of the following settings:■To run the processor at full speed regardless of the power source, change the Running on batteries setting to Maximum Performance.■To run the processor at reduced speed (using less power) regardless of the power source, change the Plugged in setting to Battery Optimized Performance.■To turn off SpeedStep technology control, click Advanced, select the Disable Intel SpeedStep technology control check box, then click OK.■To remove the SpeedStep icon from the taskbar, click Advanced, select the Remove icon from taskbar check box, then click OK.5Click OK.Solo9550.book Page 145 Tuesday, June 19, 2001 3:18 PM
146Chapter 9: Managing Powerwww.gateway.comSolo9550.book Page 146 Tuesday, June 19, 2001 3:18 PM
14710www.gateway.comTravel TipsThese tips can make traveling with your notebook more convenient and trouble-free. This chapter provides information on:■Using the modem■Using your radio frequency wireless connections■Transferring files■Protecting your notebook from loss and theft■Managing your notebook’s power efficientlyTips & Tricks To access the contents of this manual while you are traveling, download an electronic copy from www.gateway.com/support/manlib/.Solo9550.book Page 147 Tuesday, June 19, 2001 3:18 PM
148Chapter 10: Travel Tipswww.gateway.comModem■Take a telephone cord to connect the modem to telephone jacks. If you are traveling internationally, take telephone jack adapters or an acoustic handset coupler.■Take a telephone line protector.■Take a telephone line tester to check for unsafe lines, especially if you are traveling internationally.■Take remote access information with you so you can connect to your ISP while outside of your usual calling area. A list of country dialing codes may be especially useful if you are traveling internationally.■Download entire Web sites that you frequently visit for off-line viewing if you will be traveling for extended periods without access to an Internet connection.Radio frequency wireless connections■Every country has different restrictions on the use of wireless devices. If your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to your trip for any restrictions on the use of a wireless device in the destination country.■If your system came equipped with an internal embedded wireless device, see “Safety, Regulatory, and Legal Information” on page 281 for general wireless regulatory guidelines.■Wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. Bluetooth and IEEE 802.11B (also known as wireless Ethernet or WiFi) communication devices are examples of devices which use wireless to communicate.Solo9550.book Page 148 Tuesday, June 19, 2001 3:18 PM
149Fileswww.gateway.comFiles■Copy your working files from your desktop computer to your notebook before you travel.■If you need to access your desktop computer files from your notebook while traveling, set up the desktop computer for remote access.■Take extra diskettes for transferring files between computers and backing up files.Security■Get a locking cable for your notebook so you can attach a cable lock and leave the notebook in your hotel room while you are away.■Always keep your notebook with you while waiting in airports, train stations, or bus terminals. Be ready to claim your notebook as soon as it passes through the x-ray machine in security checkpoints.■Write down your notebook model number and serial number (available on the system label) in case of theft or loss, and keep the information in a safe place. Also, tape your business card or an address label to your notebook and accessories.■Whoever sits next to you or behind you can see your notebook display. Avoid working with confidential files until you can be sure of privacy.■Use a startup password to restrict access to your notebook.Important Use a password that you can remember, but that is difficult for someone else to guess. The password feature is very secure, with no easy way to recover a forgotten password. If you forget your password, you must return your notebook to Gateway for service. Call Gateway Technical Support for instructions.Solo9550.book Page 149 Tuesday, June 19, 2001 3:18 PM
150Chapter 10: Travel Tipswww.gateway.comTo create a startup password:1Restart your notebook. As soon as you see a startup screen, press F2. The BIOS Setup utility opens.2Open the Security menu, then highlight Password on boot and press ENTER.3Highlight Enabled, then press ENTER.4Highlight Set Supervisor Password, then press ENTER and follow the instructions. You must set the supervisor password in order to set the user (startup) password.5Highlight Set User Password, then press ENTER and follow the instructions. This is the password you need to enter at startup.6Exit the BIOS Setup utility by opening the Exit menu, then selecting Exit Saving Changes. When you start your computer, you are prompted to enter the user password you set in Step 5.Power To get the best performance from your notebook, avoid using the battery whenever possible, monitor the battery charge, and use the most efficient power management settings.■For information on conserving battery power, see “Conserving battery power” on page 136.■For information on using alternate power sources, see “Using alternate power sources” on page 136.■For information on monitoring the battery charge, see “Monitoring the battery charge” on page 130.Solo9550.book Page 150 Tuesday, June 19, 2001 3:18 PM
15111www.gateway.comCustomizing Your NotebookThis chapter provides information about customizing your computer by changing settings in Windows.You can:■Change screen and display settings■Change the background and screen saver■Adjust the touchpad settings■Program the multi-function buttons on the keyboardSolo9550.book Page 151 Tuesday, June 19, 2001 3:18 PM
152Chapter 11: Customizing Your Notebookwww.gateway.comAdjusting the screen and desktop settingsAdjusting the color depth and screen area are two of the most basic display settings you may need to change. You can also adjust settings such as the screen background and screen saver.Adjusting the color depthColor depth is the number of colors your LCD displays. Various image types require various color depths for optimum appearance on your LCD. For example, simple color drawings may appear adequately in 256 colors while color photographs need millions of colors to be displayed with optimum quality.Windows lets you choose from several color depth settings for your LCD. We recommend that the 16-bit High Color setting be used at all times.If the color in your images seems “false” or “jumpy,” especially after you have played a game or run a video-intensive program, check the color depth setting and return it to 16-bit High Color, if necessary.HelpSpot For more information on adjusting the color depth, double-click the HelpSpot icon on your desktop.Solo9550.book Page 152 Tuesday, June 19, 2001 3:18 PM
153Adjusting the screen and desktop settingswww.gateway.comTo change the color depth:1Click Start, then select Settings, then Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties window opens.3Click the Settings tab.4Select a setting from the Colors list. For most purposes, the color depth should be 16-bit High Color.5If you want to save your changes, click OK. Windows tells you it will apply your changes when you click OK again.6Click OK.Solo9550.book Page 153 Tuesday, June 19, 2001 3:18 PM
154Chapter 11: Customizing Your Notebookwww.gateway.comAdjusting the screen areaYou can change the screen area to a size you prefer. For example, you can increase the screen area to fit more icons on your desktop, or you can decrease the screen area to make reading and identifying objects on the display easier. The larger the screen area, the smaller individual components of the screen, such as icons and menu bars, appear.To change the screen area:1Click Start, then select Settings, then Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties window opens.3Click the Settings tab.4Drag the Screen area slider to the size you prefer.HelpSpot For more information on adjusting the screen area, double-click the HelpSpot icon on your desktop.Solo9550.book Page 154 Tuesday, June 19, 2001 3:18 PM
155Adjusting the screen and desktop settingswww.gateway.com5If you want to save your changes, click OK. Windows tells you it will apply your changes when you click OK again.6Click OK.Applying a color schemeA color scheme is a set of colors that you can apply to your Windows environment. For example, you can change the appearance of such things as the desktop, windows, and dialog boxes. You can select an existing scheme or create your own.To select a color scheme:1Click Start, then select Settings, then Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties window opens.HelpSpot For more information on applying a color scheme, double-click the HelpSpot icon on your desktop.Solo9550.book Page 155 Tuesday, June 19, 2001 3:18 PM
156Chapter 11: Customizing Your Notebookwww.gateway.com3Click the Appearance tab. If you want to apply one of Windows’ color schemes, go to Step 6.4If you want to create a new scheme, select various items from the Item list and change their settings.5Click Save As, type a name for the new scheme, and then click OK.6Select a color scheme from the Scheme list. An example of the scheme appears in the window above the list.7Click OK.Solo9550.book Page 156 Tuesday, June 19, 2001 3:18 PM
157Adjusting the screen and desktop settingswww.gateway.comChanging the desktop backgroundThe Windows desktop background can be changed to either a picture or HTML document. Windows provides several background pictures. You can also use pictures or HTML documents that you have created or retrieved from other sources.To change the desktop background:1Click Start, then select Settings, then Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties dialog box opens.Important If Active Desktop is turned on and you have chosen to display Web content, the standard desktop background will be partially or completely hidden, so you may not be able to see changes you have made in the background. For more information about Active Desktop, see HelpSpot.HelpSpot For more information on changing the desktop background, double-click the HelpSpot icon on your desktop.Solo9550.book Page 157 Tuesday, June 19, 2001 3:18 PM
158Chapter 11: Customizing Your Notebookwww.gateway.com3Click the Background tab.4Select a background picture from the Select a background picture or HTML document as Wallpaper list.- OR -Select a background picture from another location by clicking Browse.5If you want the picture you chose to cover the entire screen, select Tile from the Picture Display list.6If the picture you chose does not cover the entire screen and you did not choose to tile the image in Step 5, you can change the solid color behind the picture by clicking Pattern, selecting a pattern from the Pattern list, then clicking OK.7Click OK.Solo9550.book Page 158 Tuesday, June 19, 2001 3:18 PM
159Adjusting the screen and desktop settingswww.gateway.comSelecting a screen saverYou can use a screen saver to keep others from viewing your screen while you are away from your computer. Windows supplies a variety of screen savers that you can choose from, and many more are available from the Internet and as commercial products.To select a screen saver:1Click Start, then select Settings, then Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties dialog box opens.HelpSpot For more information on changing the screen saver, double-click the HelpSpot icon on your desktop.Solo9550.book Page 159 Tuesday, June 19, 2001 3:18 PM
160Chapter 11: Customizing Your Notebookwww.gateway.com3Click the Screen Saver tab.4Select a screen saver from the Screen Saver list. Windows previews the screen saver.5If you want to customize the screen saver, click Settings and then make your changes. If the Settings button is not available, you cannot customize the screen saver you selected.6If you want to password protect your screen saver, select the Password protected checkbox, click Change, type your password, confirm it, then click OK.7If you want to change the time before the screen saver is activated, click the up or down arrows next to the Wait box.8Click OK.Solo9550.book Page 160 Tuesday, June 19, 2001 3:18 PM
161Changing the touchpad settingswww.gateway.comChanging the touchpad settingsYou can adjust the double-click speed, pointer speed, left-hand or right-hand configuration, and other touchpad settings.To change your touchpad settings:1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Mouse icon, click view all Control Panel options.2Double-click the Mouse icon. The Mouse Properties dialog box opens.3Click one of the tabs to change your touchpad settings:■Buttons lets you change the button configuration and the double-click speed.■Pointers lets you customize the appearance of your cursor and pointer.■Pointer Options lets you set your pointer speed and pointer trails.HelpSpot For more information on changing the mouse settings, double-click the HelpSpot icon on your desktop.Solo9550.book Page 161 Tuesday, June 19, 2001 3:18 PM
162Chapter 11: Customizing Your Notebookwww.gateway.com■Touch lets you customize the tap response and sensitivity of the touchpad.■Edge Motion lets you customize the long distance pointer motion of the touchpad.■Scrolling lets you customize the virtual scrolling capabilities of the touchpad.■Tap Zones lets you assign specific actions to zones on the touchpad.■More Features lets you control special features of the touchpad.■Button Actions lets you assign specific actions to the touchpad buttons.4To assign a function to the rocker switch on the Solo 9550, click the Button Actions tab. Select the function for the Extended Button One (for the top rocker button) and Extended Button Two (for the bottom rocker button) from the lists.5Click OK to save changes. For more information on the touchpad settings, click Help.Solo9550.book Page 162 Tuesday, June 19, 2001 3:18 PM
163Programming the multi-function buttonswww.gateway.comProgramming the multi-function buttonsThe Multi-function Keyboard Utility lets you change the actions of some of the multi-function buttons.To program the multi-function buttons:1Click Start, then select Settings, then Control Panel. The Control Panel window opens. If you do not see the Multi-function Keyboard icon, click view all Control Panel options.2Double-click the Multi-function Keyboard icon. The Gateway Multi-function Keyboard Utility dialog box opens.3Click the tab corresponding to the multi-function button to make changes to its function, then click OK. To see which button each tab corresponds to, see “Multi-function buttons” on page 40.HelpSpot For more information on programming the multi-function buttons, double-click the HelpSpot icon on your desktop.Solo9550.book Page 163 Tuesday, June 19, 2001 3:18 PM
164Chapter 11: Customizing Your Notebookwww.gateway.comSolo9550.book Page 164 Tuesday, June 19, 2001 3:18 PM
16512www.gateway.comUpgrading Your NotebookThis chapter provides information about adding hardware devices to your notebook. Topics include:■Adding PC Cards■Changing bay modules■Replacing memory■Replacing the hard driveSolo9550.book Page 165 Tuesday, June 19, 2001 3:18 PM
166Chapter 12: Upgrading Your Notebookwww.gateway.comAdding PC CardsYour notebook has two PC Card slots (also known as PCMCIA card slots). These slots accept Type I, II, and III PC Cards.You do not need to restart your notebook when changing most cards because your notebook supports hot-swapping. Hot-swapping means that you can insert a PC Card while your notebook is running. If your PC Card does not work after hot-swapping, refer to the PC Card manufacturer’s documentation for further information.To insert a PC Card:■Push the card firmly into the PC Card slot label-side up until the outer edge of the card is flush with the side of the notebook.Important The Solo 9500 also supports Zoom Video PC Cards. If you are using a Zoom Video PC Card, it must be inserted into the bottom slot.HelpSpot For more information on adding PC Cards, double-click the HelpSpot icon on your desktop.Solo9550.book Page 166 Tuesday, June 19, 2001 3:18 PM
167Adding PC Cardswww.gateway.comTo remove a PC Card:1Click the PC Card eject icon on the task bar (Windows Me and Windows 2000 only).2Select the name of the card you want to remove, then click the Stop button (Windows Me and Windows 2000 only).3Release the eject button by pressing the PC Card eject button once.4Eject the PC Card by pressing the eject button again.Solo9550.book Page 167 Tuesday, June 19, 2001 3:18 PM
168Chapter 12: Upgrading Your Notebookwww.gateway.comChanging bay modulesYour notebook’s modular bays support different bay modules, such as a CD/DVD drive, a second hard drive, a diskette drive, or a second battery.Changing 5.25” bay modulesTo change 5.25” bay modules:1Make sure your notebook is on or off (not in Standby or Hibernate mode).2If your notebook is on, left-click the BaySwap icon in the taskbar, then click Change drives in Swappable Bay. The hot-swap indicator turns green when it is safe to pull the module out of the bay. If your notebook is off, skip this step.3Close the cover and turn your notebook over.5.25” modular bay release latch5.25” modular baySolo9550.book Page 168 Tuesday, June 19, 2001 3:18 PM
169Changing bay moduleswww.gateway.com4Slide and hold the release latch, then pull the module straight out and away from your notebook.5Push the new module straight into the bay until it clicks into place.6Open the notebook.7If your notebook is on, click the OK button in the BaySwap dialog box. If your notebook is off, turn it on.Solo9550.book Page 169 Tuesday, June 19, 2001 3:18 PM
170Chapter 12: Upgrading Your Notebookwww.gateway.comChanging 3.5” bay modulesTo change 3.5” bay modules:1Turn off the notebook (do not go to Hibernate mode), close the cover, and turn the notebook over.2Remove the security screw. (Solo 9500 only.)3Slide and hold the release latch, then pull the module straight out and away from your notebook.4Push the new module straight into the bay until it clicks into place.5Replace the security screw. (Solo 9500 only.)6Turn on your notebook and resume your work.Security screw (Solo 9500 only)3.5” modular bay release latch3.5” modular baySolo9550.book Page 170 Tuesday, June 19, 2001 3:18 PM
171Preventing static electricity dischargewww.gateway.comPreventing static electricity dischargeThe components inside your computer are extremely sensitive to static electricity, also known as electrostatic discharge (ESD).Before installing memory or replacing the hard drive, follow these guidelines:■Turn off the computer power.■Wear a grounding wrist strap (available at most electronics stores) and attach it to a bare metal part of the computer.■Touch a bare metal surface on the back of the computer.■Unplug the power cord and modem cable.■Remove the main battery (and secondary battery, if installed).Before working with computer components, follow these guidelines:■Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam.■Remove components from their antistatic bags only when you are ready to use them. Do not lay components on the outside of antistatic bags because only the inside of the bags provide electrostatic protection.■Always hold expansion cards by their edges or their metal mounting brackets. Avoid touching the edge connectors and components on the cards. Never slide expansion cards or components over any surface.Caution ESD can permanently damage electrostatic discharge sensitive components in the computer. Prevent ESD damage by following ESD guidelines every time you open the computer case.Warning To avoid exposure to dangerous electrical voltages and moving parts, turn off your computer and unplug the power cord and modem cable before opening the case.Warning To prevent risk of electric shock, do not insert any object into the vent holes of the notebook.Solo9550.book Page 171 Tuesday, June 19, 2001 3:18 PM
172Chapter 12: Upgrading Your Notebookwww.gateway.comInstalling memoryYour portable computer uses memory modules called SO-DIMMs (Small Outline Dual Inline Memory Modules). The modules are available in various capacities and any module can be placed in any available slot. Use only PC133 memory modules for upgrading your memory.To add or replace memory modules:1Follow the instructions under “Preventing static electricity discharge” on page 171.2Turn off the notebook (do not go to Hibernate mode) and close the cover.3Disconnect the power and modem cables.4Turn the notebook over, then remove the main battery (and second battery, if installed). For more information, see “Changing the main battery” on page 132 and “Installing a second battery” on page 134.5Remove the memory bay cover screw, then remove the memory bay cover.Warning Disconnect the power supply cord, remove the battery, and disconnect the modem cable before you remove the memory bay cover. Replace the cover before you restore power or reconnect the modem cable.Memory bay coverSolo9550.book Page 172 Tuesday, June 19, 2001 3:18 PM
173Installing memorywww.gateway.com6If you are removing a memory module, gently press outward on both clips at either end of the memory module until the module tilts upward. (The illustration below may look different from your computer.)7Pull the memory module out of the slotSolo9550.book Page 173 Tuesday, June 19, 2001 3:18 PM
174Chapter 12: Upgrading Your Notebookwww.gateway.com8Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so that it can only be inserted in one direction. If the module does not fit, make sure the slot in the module lines up with the tab in the memory bay. (The illustration below may look different from your computer.)9Gently push the module down until it clicks in place.10 Replace the memory bay cover and cover screw, insert the battery, connect the AC adapter, and turn on your notebook.Important Use only PC133 (133 MHz) memory modules.Solo9550.book Page 174 Tuesday, June 19, 2001 3:18 PM
175Replacing the main hard drivewww.gateway.comReplacing the main hard driveIf you would like more hard drive capacity, you can install a second hard drive or replace your original drive with a higher-capacity drive. To replace the drive, follow the instructions below.To replace the main hard drive:1Follow the instructions under “Preventing static electricity discharge” on page 171 for important precautions.2Turn off the notebook (do not go to Hibernate mode) and close the cover.3Disconnect the power and modem cables.4Turn the notebook over, then remove the main battery (and second battery, if installed). For more information, see “Changing the main battery” on page 132 and “Installing a second battery” on page 134.5Remove the security screw. (Solo 9500 only.)Warning Disconnect the power supply cord, remove the battery, and disconnect the modem cable before you remove the hard drive. Replace the hard drive before you restore power or reconnect the modem cable.Solo9550.book Page 175 Tuesday, June 19, 2001 3:18 PM
176Chapter 12: Upgrading Your Notebookwww.gateway.com6Slide and hold the release latch, then pull the 3.5” module straight out and away from your notebook. The main hard drive is located beneath the 3.5” module.Solo9550.book Page 176 Tuesday, June 19, 2001 3:18 PM
177Replacing the main hard drivewww.gateway.com7Remove the two screws that secure the hard drive kit to the notebook.8Slide the hard drive kit away from the connector.Solo9550.book Page 177 Tuesday, June 19, 2001 3:18 PM
178Chapter 12: Upgrading Your Notebookwww.gateway.com9Lift the end of the hard drive kit furthest from the connector, then remove the kit from the bay.10 Place the new hard drive kit in the bay and slide it into the connector.11 Replace the two screws to secure the hard drive kit to the notebook.12 Reinstall the 3.5” module.13 Reinstall the security screw (Solo 9500 only).14 Reinstall the battery and connect the power.Solo9550.book Page 178 Tuesday, June 19, 2001 3:18 PM
17913www.gateway.comUsing the Port Replicator and Docking StationChecking out the port replicatorThe optional port replicator gives you a convenient way to attach external devices such as a monitor, a full-size keyboard, or an AC adapter.Although devices can be attached directly to the ports on the notebook, the port replicator lets you make all of those connections in one step. The port replicator also gives you access to additional ports not found on the notebook.Solo9550.book Page 179 Tuesday, June 19, 2001 3:18 PM
180Chapter 13: Using the Port Replicator and Docking Stationwww.gateway.comFrontRelease latchDocking portDocking postsSolo9550.book Page 180 Tuesday, June 19, 2001 3:18 PM
181Checking out the port replicatorwww.gateway.comLeft sideComponent Icon DescriptionUSB ports Plug a USB device (such as a USB scanner) into one of these ports. When the notebook is docked, only the USB ports on the port replicator are available.Dual-mode Kensington lock slotsSecure your notebook and port replicator to an object by connecting a Kensington cable lock to these slots.Connect the lock here to secure only the port replicator (left slot).Connect the lock here to secure both the port replicator and the notebook (right slot).USB ports Dual-modeKensington lock slotsSolo9550.book Page 181 Tuesday, June 19, 2001 3:18 PM
182Chapter 13: Using the Port Replicator and Docking Stationwww.gateway.comBackComponent Icon DescriptionHeadphone jack Plug amplified speakers or headphones into this jack.Microphone jack Plug a microphone into this jack. While the external microphone is connected, the built-in microphone is turned off.Line in jack Connect an external audio device (such as a stereo) to this jack so you can record sound on your notebook or play sound through the notebook speakers.Line out jack Connect an external audio device (such as a stereo) to this jack so you can play your notebook audio through that device.Parallel port Plug a parallel device (such as a printer) into this port.Headphone jackMicrophone jackLine in jackLine out jackParallel port Serial port Joystick/ MIDI port Monitor portTV in jackTV out jackS-Video out jackS/PDIF jack Power connectorSerial portSolo9550.book Page 182 Tuesday, June 19, 2001 3:18 PM
183Checking out the port replicatorwww.gateway.comSerial port Plug a serial device (such as a serial camera) into this port.Joystick/MIDI port Plug a game joystick or an electronic MIDI musical instrument into this port. This port provides both MIDI in and out capabilities.Monitor port Plug an external VGA monitor into this port.TV in jack Not functional with your notebook.TV out jack Plug a standard RCA cable into this jack and the jack on a TV or VCR so you can view your notebook display on a TV using NTSC/PAL Composite Video.S-Video out jack Plug a standard S-Video cable into this jack and the jack on an S-Video device.S/PDIF jack Plug a standard RCA cable into this jack and the jack on a digital audio device.Power connector Plug the AC adapter into this connector. Use only the AC adapter for your particular model.Component Icon DescriptionSolo9550.book Page 183 Tuesday, June 19, 2001 3:18 PM
184Chapter 13: Using the Port Replicator and Docking Stationwww.gateway.comRight sideComponent Icon DescriptionPS/2 mouse port Plug a PS/2 mouse into this port.PS/2 keyboard port Plug a PS/2 keyboard into this port.PS/2 mouse portPS/2 keyboard portSolo9550.book Page 184 Tuesday, June 19, 2001 3:18 PM
185Connecting to the port replicatorwww.gateway.comConnecting to the port replicatorYou can attach your notebook to the port replicator while your notebook is off, on, or in Standby/Suspend mode.To attach your notebook to the port replicator:1Connect external devices to the ports on the port replicator.2Lift the release latch on the port replicator.3Align the connector holes on the bottom of your notebook with the docking posts on the port replicator, then press down on the release latch until it snaps into place.Important The notebook may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work properly. Follow any on-screen instructions, if necessary.Solo9550.book Page 185 Tuesday, June 19, 2001 3:18 PM
186Chapter 13: Using the Port Replicator and Docking Stationwww.gateway.comTo separate the notebook from the port replicator:1Click Start, then select Eject PC. The Eject PC menu item appears in the Start menu only while the notebook is docked.2Lift the release latch on the port replicator until the notebook is disconnected, then lift the notebook away from the docking posts.Solo9550.book Page 186 Tuesday, June 19, 2001 3:18 PM
187Checking out the docking stationwww.gateway.comChecking out the docking stationThe optional docking station gives you a convenient way to attach external devices such as a monitor, a full-size keyboard, or an external pointing device. Although devices can be attached directly to ports on the notebook, the docking station lets you make all of those connections in one step. It also provides additional ports and other expansion features.FrontDocking portDocking posts Docking eject button Release latchSolo9550.book Page 187 Tuesday, June 19, 2001 3:18 PM
188Chapter 13: Using the Port Replicator and Docking Stationwww.gateway.comLeft sideComponent Icon DescriptionS/PDIF jack Plug a standard RCA cable into this digital audio output jack and the jack on a digital audio device.USB ports Plug a USB device into one of these ports. These ports and the notebook USB ports can be used at the same time.Dual-mode Kensington lock slotsSecure your notebook and docking station to an object by connecting a Kensington cable lock to these slots.Connect the lock here to secure only the docking station (left slot).Connect the lock here to secure both the docking station and the notebook (right slot).S/PDIF jackUSB portsDual-modeKensington lock slotsSolo9550.book Page 188 Tuesday, June 19, 2001 3:18 PM
189Checking out the docking stationwww.gateway.comBackComponent Icon DescriptionRight channel analog audio out jack Plug a standard RCA cable into this jack for a right stereo channel audio connection to an audio device.Left channel analog audio out jack Plug a standard RCA cable into this jack for a left stereo channel audio connection to an audio device.TV out (Composite Video) jack Plug a standard RCA cable into this jack and the jack on a TV or VCR so you can view your notebook display on a TV using NTSC/PAL Composite Video.TV in (Composite Video) jack Not functional with your notebook.Parallel port Plug a parallel device (such as a printer) into this port.Right channel analog audio out jackLeft channel analog audio out jackTV out (Composite Video) jackTV in (Composite Video) jackParallelport Serialport Joystick/MIDI port Monitor port S-Video in jackS-Video out jackPower connectorSolo9550.book Page 189 Tuesday, June 19, 2001 3:18 PM
190Chapter 13: Using the Port Replicator and Docking Stationwww.gateway.comSerial port Plug a serial device (such as a serial camera) into this port.Joystick/MIDI port Plug a game joystick or an electronic MIDI musical instrument into this port. This port provides both MIDI in and out capabilities.Monitor port Plug an external VGA monitor into this port.S-Video in jack Not functional with your notebook.S-Video out jack Plug a standard S-Video cable into this jack and the jack on an S-Video device.Power connector Plug the AC adapter into this connector. Use only the AC adapter for your particular model.Component Icon DescriptionSolo9550.book Page 190 Tuesday, June 19, 2001 3:18 PM

Navigation menu