Quanta Computer LM175 LTE M.2 Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2336499
Application ID	EtA8VsEY159L/khQDSFiIA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	147.61kB (1845089 bits)
Date Submitted	2014-07-25 00:00:00
Date Available	2015-01-21 00:00:00
Creation Date	2017-10-21 20:40:29
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 20:40:29
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2

Quanta LM175 Test Operation Guide
Version 0.1
Jun. 04, 2014
Robert
Contents
1.
Introduction .................................................................................................................................... 3
2.
Test Environment ............................................................................................................................ 3
2.1.
Uninstallation ......................................................................................................................... 3
2.1.1.
Windows 7 (32 bit) ................................................................................................................. 3
2.2.
Installation of drivers .............................................................................................................. 5
2.2.1.
Windows 7 (32 bit) ................................................................................................................. 5
3.
Operation of Connection Manager ................................................................................................. 11
3.1.
Windows 7 (32 bit) ................................................................................................................ 11
3.1.1.
Basic Configuration ................................................................................................................ 11
3.1.2.
Extended Information ............................................................................................................13
3.1.3.
LTE Manager ..........................................................................................................................15
3.1.4.
Manual PLMN ........................................................................................................................16
3.1.5.
Change to Commercial Mode.................................................................................................17
3.1.6.
Disable Polling .......................................................................................................................18
3.1.7.
PIN Management ...................................................................................................................19
3.1.8.
Automatic Connect Mode ......................................................................................................20
3.1.9.
Device Location .....................................................................................................................21
3.1.10.
Help.......................................................................................................................................22
3.1.11.
Reset .....................................................................................................................................23
Page 1
Revision History
Version
0.1
Release Date
Jun. 04, 2014
Description
st
1 Test Operation Guide Release
Page 2
1. Introduction
This document gives the guidance on how to test Quanta devices.
2. Test Environment
Quanta LM175 device supports Windows XP, Windows Vista (32 bit), and Windows 7 (32 bit) operating
system. It’s recommended to install Quanta LM175 software in Windows 7 32-bit OS.
2.1. Uninstallation
In order to install latest version of software, uninstallation of previous version is required, including
drivers, connection manager, and corresponding software tools.
2.1.1. Windows 7 (32 bit)
1.
Please click
StartProgramsAltair SemiconductorLTE
ALT3100Uninstall
2.
Please click “Yes (Y)” button.
Page 3
3.
Please click “Uninstall” button.
4.
Please wait a few seconds to complete
uninstallation.
5.
Please click “Close” button.
6.
Please click “OK” button.
7.
Please click
“StartProgramsAltair SemiconductorLTE
ALT3100HLVUSBUninstall”.
8.
Please click “YES (Y)” button.
9.
Please reboot your computer after you have
completed the uninstallation.
Page 4
2.2. Installation of drivers
2.2.1. Windows 7 (32 bit)
1.
Please double clicks on “Altair(Quanta) Tool
Package v1.0.0.exe” to start installation.
2.
Please click “Next >” button.
3.
Please click “Install” button.
4.
It will take a few minutes to complete
installation.
5.
Please click “Next >” button.
Page 5
6.
Please check “I accept the terms in the license
agreement”.
7.
Please click “Next >” button.
8.
Please select “Full Installation” type.
9.
Please click “Next >” button.
10. Please click “Next >” button.
Page 6
11. Please click “Install” button.
12. Please click “Next >” button.
13. Please click “Finish” button.
Page 7
14. Please click “Next >” button.
15. Please check “I accept the terms in the license
agreement”.
16. Please click “Next >” button.
17. Please click “Install” button.
Page 8
18. Please click “Continue to install driver anyway
(I)”.
19. Please click “Continue to install driver anyway
(I)”.
20. Please click “Continue to install driver anyway
(I)”.
21. Please click “Continue to install driver anyway
(I)”.
22. Please un-check “Launch “Hostless Image
Burn””.
23. Please click “Finish” button to complete driver
installation.
24. Please click “OK” button.
25. Please click “Finish” button.
Page 9
26. Please plug in Quanta device and please be
patient and wait a few minutes to complete
driver installation.
27. Please click “Close (C)” button.
28. Please reset Quanta device (take out and plug in
the usb cable), it will take about 50 seconds for
Quanta embedded system to be ready.
Page 10
3. Operation of Connection Manager
3.1. Windows 7 (32 bit)
3.1.1. Basic Configuration
1.
In order to get information from our
embedded connection manager, it’s
mandatory to configure as the following
instructions.
2.
Please click
StartProgramsAltair SemiconductorLTE
ALT3100Connection Manager.
3.
Please right click on top of connection manager
and select
OptionsDevice LocationTechnician PC.
4.
Connection manager will pop out window for
you to enter IP and port.
5.
Please enter IP address “10.0.0.1”. (see NOTE)
6.
Please click “OK” button.
NOTE: If you have successfully installed Quanta
LM175 device, the embedded module will generate
DHCP server and its IP address is “10.0.0.1”.
Meanwhile, our Quanta device will get a DHCP
address “10.0.0.133” automatically.
Page 11
7.
Please check if connection manager shows
device information correctly and the red Altair
logo turns into yellow color.
Page 12
3.1.2. Extended Information
1.
Please right click on top of connection manager
and select
ViewExtended Information.
2.
Connection manager will pop out “Extended
Information” window.
3.
It’s NOT mandatory to set up this
“Configuration” tab, connection manager will
scan all the supported frequency bands and try
to connect to the network.
Page 13
4.
The “Extended Data” tab shows information of
Connection Status, APN, Transmission mode,
Bandwidth, DL EARFCN, Band, PLMN and
Physical Cell ID and so on.
5.
The “At Commands” tab will allow you to send
AT Commands sets to configure supported
functional parameters or to get supported
information you want.
Page 14
3.1.3. LTE Manager
1.
Please right click on top of connection manager
and select
ViewLTE Manager.
2.
Connection manager will pop out a “Supervisor
Password” window.
3.
Please input “123456” and click “OK” button.
4.
It will pop out a “LTE Manager” window.
5.
LTE Manager shows information about
GeneralInfo, LogCreator, Dispatcher, Relay, and
GPS Tool.
Page 15
3.1.4. Manual PLMN
1.
Please right click on top of connection manager
and select
Manual PLMN.
2.
Connection manager will pop out a “Plmn
Search” window.
3.
It’s not necessary for you to select PLMN
manually if you want to connect to network.
Page 16
3.1.5. Change to Commercial Mode
1.
Please right click on top of connection manager
and select
“Change to Commercial Mode”.
2.
Connection manager will pop out a “User Mode
Changed” dialog.
3.
Please click “YES (Y)” button.
4.
Please wait a few seconds for device to be
ready.
Page 17
3.1.6. Disable Polling
1.
Please right click on top of connection manager
and select
“OptionsDisable Polling”.
2.
Connection manager will stop searching for
available network.
Page 18
3.1.7. PIN Management
1.
Please right click on top of connection manager
and select
“OptionsPIN ManagementPIN Information”
to get PIN information.
2.
Connection manager will pop out “PIN
Information” window.
3.
Please click “OK” button.
4.
You also can enable PIN usage by right click on
top of connection manager and select
“OptionsPIN ManagementEnable PIN
Usage”.
5.
Please input correct PIN code and click “OK”
button.
Page 19
3.1.8. Automatic Connect Mode
1.
Please right click on top of connection manager
and select
“OptionsAutomatic Connect Mode” to switch
connection manager from manual connect
mode to automatic connect mode.
2.
Connection manager will automatically connect
to network.
Page 20
3.1.9. Device Location
1.
For Quanta hostless device, please use
“Technician PC” only.
2.
Please right click on top of connection manager
and select
“OptionsDevice LocationTechnician PC”.
3.
Please set IP address to “10.0.0.1” and click
“OK” button.
4.
Connection manager will get information from
Quanta hostless device.
Page 21
3.1.10.
1.
Help
Please right click on top of connection manager
and select
“HelpAbout”.
2.
Connection manager will pop out a “LTE Card
Info” message box.
3.
It will show information of IMSI number, IMEI
number, Supported Bands, Current firmware
version, and System package version.
4.
Please click “OK” button.
5.
Please right click on top of connection manager
and select
“HelpShow Versions”.
6.
Connection manager will pop out a “Version
info” message box.
7.
It will show information of System release
version, SWInfra release version, and Current
firmware version.
8.
Please click “OK” button.
Page 22
3.1.11.
1.
Reset
Please right click on top of connection manager
and select
“Reset”.
2.
Connection manager will pop out a “” message
box.
Page 23
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this
module. The end user manual shall include all required regulatory information/warning as show in
this manual.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. This transmitter must not be co‐located or
operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
End Product Labeling
When the module is installed in the host device, the FCC ID label must be visible through a window
on the final device or it must be visible when an access panel, door or cover is easily re‐moved. If
not, a second label must be placed on the outside of the final device that contains the following text:
“Contains FCC ID: HFS‐LM175”
The grantee's FCC ID can be used only when all FCC compliance requirements are met.
This device is intended only for OEM integrators under the following conditions:
(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
(2) The transmitter module may not be co‐located with any other transmitter or antenna except as
described below.
(3) To comply with FCC regulations limiting both maximum RF output power and human exposure to
RF radiation, the maximum antenna gain including cable loss in a mobile exposure condition must
not exceed:
Standalone Condition:
。 5.0 dBi in 1700 MHz Band
。 9.0 dBi in 700 MHz Band
Assuming collocated with a WLAN transmitter with maximum 34 dBm average EIRP power
。 5.0 dBi in 1700 MHz Band
。 6.0 dBi in 700 MHz Band
Remark: This assumption is not valid if the output power of the collocated WLAN transmitter is
higher than 34 dBm.
In the event that these conditions cannot be met (for example certain laptop configurations or
co‐location with another transmitter), then the FCC authorization is no longer considered valid and
the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be
responsible for re‐evaluating the end product (including the transmitter) and obtaining a separate
FCC authorization. A separate approval is required for all other operating configurations, including
portable configurations with respect to 2.1093 and different antenna configurations.
To ensure compliance with all non‐transmitter functions, the host manufacturer is responsible for
evaluating host system for Part 15 subpart B requirement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:07:21 11:25:38+08:00
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2014:07:24 17:23:29+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:07:24 17:23:29+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Document ID                     : uuid:c0fefaa3-72a0-4f4c-8554-53b623dcb1ef
Instance ID                     : uuid:48809d65-e13a-45d6-9b29-5e76a480ae62
Producer                        : Adobe Acrobat Pro 9.1.2
Page Count                      : 26

EXIF Metadata provided by EXIF.tools